Organic matter geochemistry and petrography of Late Cretaceous (Cenomanian-Turonian) organic-rich shales from the Belle Fourche and Second White Specks formations,west-central Alberta,Canada

Organic-rich mudstones with up to 10 wt% TOC from the upper portion of the Belle Fourche Formation and the lower part of the Second White Specks Formation in the Western Canada Sedimentary Basin were evaluated as source rocks. Both geochemistry and organic petrography indicate an open marine paleoenvironment with deposition of Type II kerogen based on the predominance of marine alginite and amorphous organic matter (OM), limited amounts of terrigenous vitrinite and inertinite macerals, the presence of marine fossils, and the low ratio of TOC to total sulfur (∼1.26). The prevalence of short-chain n-alkanes (n-C₁₃ to n-C₁₉), a predominance of C₂₈ αββ(H)-20S steranes, and small concentrations of oleanane confirm the dominantly algal and planktonic origin of OM. Alternating oxic to anoxic paleoenvironmental sedimentary conditions are proposed based on common bioturbation, abundant inoceramid prisms, and good organic richness. Biomarker distributions are consistent with intermittent anoxia, without unequivocal evidence for water column stratification or hypersalinity. The thermal maturity measured in seven sediment cores by different methods consistently indicates a westward increase in maturity according to vitrinite reflectance, T_max, and hopane and sterane biomarkers. Two cores are thermally immature (∼0.42 %Ro), one is early mature (∼0.65 %Ro), and four cores are within the oil window (∼0.78 to 0.89 %Ro). All thermally mature cores retain good to very good hydrocarbon potential (248 mg HC/g rock) and are dominantly oil-prone and minor gas-prone based on their maceral compositions. The upper Belle Fourche and lower Second White Specks Formations represent potential targets for unconventional light shale oil production.     

Organic geochemical characteristics and oil generating potential of the Upper Jurassic Safer shale sediments in the Marib-Shabowah Basin,western Yemen

The organic rich Safer shales exposed in the north-central part of onshore Marib-Shabowah Basin are evaluated and their depositional environments are interpreted. Total organic carbon contents (TOC) of the shales range from 1.02–16.8 wt%, and yield hydrogen index (HI) values ranging from 130 to 820 mg HC/g TOC, consistent with mainly Type II with minor contributions from Type I and mixed Types II–III kerogens. The Safer shale samples have vitrinite reflectance values in the range of 0.5–1.0 R_o%, indicating early mature to peak mature stage for oil generation. T_max values range from 429–438 °C, which are in reasonably good agreement with vitrinite reflectance data. Kerogen microscopy shows that the Safer shales are characterized by high amounts of organic matter, consisting predominantly of yellow fluorescing amorphous organic matter and alginite of marine origin. This is supported by their high content of hydrogen rich Type II and I oil-prone kerogen.The biomarker distributions of the Upper Jurassic Safer extracts are characterized by dominant low to medium molecular weight compounds (n-C₁₄ to n-C₂₀), low Pr/Ph ratio (<1.0), high phytane/n-C₁₈ ratios (0.82–2.68), and predominant regular sterane C₂₇. All biomarker parameters clearly indicate that the organic matter was derived from marine algal inputs and deposited under anoxic (reducing) conditions. Hypersaline conditions also prevailed during deposition of these sediments, as indicated by the presence of gammacerane.     

Influence of maceral content on δ13C and δ15N in a Middle Pennsylvanian coal

Using density-gradient centrifugation, within-sample heterogeneity in C/N, δ¹³C, and δ¹⁵N was determined for a sample of the Blue Gem coal bed (Middle Pennsylvanian, Duckmantian (Westphalian B), Breathitt Formation) and related to maceral (petrographically identifiable organic component) composition. Relatively pure macerals were separated by density, with purities up to 99% in the case of vitrinite in fractions around 1.3 g/mL. Lower density fractions (∼ 1.2 g/mL) contain predominantly liptinite (∼ 75%) but also significant amounts of vitrinite (∼ 20%). Denser fractions contain increasing amounts of inertinite, with several fractions between 1.37 and 1.44 g/mL containing > 98% total inertinite. Within these denser fractions, semifusinite concentrated at lower densities than did fusinite. The separation of macerals by density allowed a more detailed evaluation of the isotopic composition of relatively pure macerals within a single coal. δ¹³C becomes increasingly heavy across the density gradient, with δ¹³C values being lightest in the liptinites, followed by vitrinite, and then semifusinite and fusinite; by contrast, δ¹⁵N becomes lighter across the same density range. C/H increases with density, reflecting a general decrease in aliphatic components and increase in aromatic components. C/N follows a similar pattern, ranging from < 40 to over 100, increasing significantly at densities > 1.32, the point at which inertinite macerals begin to predominate over vitrinite.The isotopic composition of macerals reflects chemical composition, which in turn reflects: 1) the original composition of plant tissues from which the macerals originated; 2) early diagenetic changes; and 3) changes during coalification. Macerals derived from lipid-rich precursor materials (liptinites) have more depleted δ¹³C values (∼ 2‰) relative to those derived from woody tissues (vitrinite). Fusinized material, derived from fossil charcoal, has δ¹³C values enriched by ∼ 0.5‰ compared with the vitrinite, consistent with the results from combustion experiments using modern plant tissues. Vitrinite fractions have enriched δ¹⁵N values relative to inertinite fractions, which may reflect early diagenetic changes in woody tissues involving preferential loss of ¹⁴N, possibly due to bacterial activity during the peat-forming stage. Due to the within-sample variability in carbon isotopic composition reported here, it is suggested that chemostratigraphic studies based on Type III kerogen (including both dispersed organic matter and coals) carefully consider the associated effects of variability in maceral composition.     

Crustal structure in an onshore–offshore transitional zone near Hong Kong,northern South China Sea

To study the crustal structure beneath the onshore–offshore transitional zone, a wide-angle onshore–offshore seismic experiment was carried out in northern South China Sea near Hong Kong, using large volume airgun sources at sea and seismic stations on land. The crustal velocity model constructed from traveltime fitting shows that the sedimentary thickness abruptly increases seaward of the Dangan Islands based on the characteristics of Pg and Multiple Pg, and the crustal structure beneath the sedimentary layer is relatively simple. The Moho depth is about 25–28 km along the profile and the P-wave velocity increases gradually with depth. The velocities in the upper crust range from 5.5 to 6.4 km/s, while that in the lower crust is 6.4–6.9 km/s. It also reveals a low velocity zone with a width of more than 10 km crossing the crust at about 75–90 km distance, which suggests that the Littoral Fault Zone (LFZ) exists beneath the onshore–offshore transitional zone. The magnetism anomalies, bouguer gravity anomalies and active seismic zone along the coastline imply the LFZ is a main tectonic fault in the onshore–offshore area. Combined with two previously published profiles in the continental South China (L–G profile) and in the northern margin of South China Sea (OBS1993) respectively, we constructed a land-sea super cross-section about 1000 km long. The results show the onshore–offshore transitional zone is a border separating the unstretched and the stretched continental crust. The low velocity layer (LVL) in the middle crust was imaged along L–G profile. However, the high velocity layer (HVL) in the lower crust was detected along OBS1993. By analyzing the mechanisms of the LVL in the middle crust and HVL in the base of crust, we believe the crustal structures had distinctly different attributes in the continental South China and in the northern SCS, which indicates that the LFZ could be the boundary fault between them.     

Highstands during Marine Isotope Stage 5: evidence from the Ironshore Formation of Grand Cayman,British West Indies

The Ironshore Formation on Grand Cayman is formed of six unconformity-bounded packages (units A–F). Units A, B, C, and D, known from the subsurface in the northeastern part of Grand Cayman, formed during Marine Isotope Stages (MIS) 11(?), 9, 7, and 5e, respectively. Unconformities at the tops of units A, B, and C are highlighted by terra rossa and/or calcrete layers. Strata in core obtained from wells drilled in George Town Harbour and exposed on the west part of Grand Cayman belong to unit D, and the newly defined units E and F. Corals from unit E yielded Th/U ages of ∼104 ka whereas conch shells from unit F gave ages of ∼84 ka. Unit E equates to MIS 5c whereas unit F developed during MIS 5a.Th/U dating of corals and conchs from the Ironshore Formation on the western part of Grand Cayman shows that unit D formed during the MIS 5e highstand whereas units E and F developed in association with highstands at 95–110 ka (MIS 5c) and 73–87 ka (MIS 5a). Unit E, ∼5 m thick in the offshore cores, is poorly represented in onshore exposures. Unit F, which unconformably overlies unit D at most localities, is formed largely of fossil-poor, cross-bedded ooid grainstones. The unconformity at the top of unit D, a marine erosional surface with up to 2.5 m relief, is not characterized by terra rossa or calcrete in the offshore cores or onshore exposures. Unit D formed with a highstand of +6 m asl, whereas units E and F developed when sea level was +2 to +5 asl and +3 to +6 m asl, respectively. Thus, the highstands associated with MIS 5e, 5c, and 5a were at similar elevations.     

The Plio–Pleistocene evolution of extensional tectonics in northern Tuscany,as constrained by new gravimetric data from the Montecarlo Basin (lower Arno Valley,Italy)

A detailed gravimetric study has been integrated with the most recent stratigraphic data in the area comprised between the Arno river and the foothills of the Northern Apennines, in northern Tuscany (central Italy). A Plio–Pleistocene basin lies in this area; its sedimentary succession can be subdivided from the bottom, in five allostratigraphic units: (1) Lower–Middle Pliocene shallow marine deposits; (2) Late Pliocene (?)–Early Pleistocene fluvio-lacustrine deposits; (3) late–Early Pleistocene–Middle Pleistocene alluvial to fluvial red conglomerates (Montecarlo Formation); (4) Middle Pleistocene alluvial to fluvial red conglomerates (Cerbaie and Casa Poggio ai Lecci Formations); (5) alluvial to fluvial deposits of Late Pleistocene age. The Bouguer anomaly map displays a strong minimum in the northeastern sector of the basin, and a gentle gradient from west to east. The map of the horizontal gradients permits to recognise three major fault zones, two of which along the southwestern and northeastern margins of the basin, and one along the southeastern edge of the Pisani Mountains. A 2.5D gravimetric modelling along a SW–NE section across the basin displays a thick wedge of sediments of density 2.25 g/cm³ (about 1700 m in the depocenter) overlying a layer of density 2.55 g/cm³, 1000 m thick, which rests on a basement of 2.72 g/cm³. The most of the sediment wedge is here referred to Upper Pliocene (?)–Lower Pleistocene, because borehole data show Pliocene marine deposits thinning northward close to the southern margin of the area. The layer below is referred to Ligurids and upper Tuscan Nappe units; the densest layer is interpreted as composed of Triassic evaporites, quartzites and Palaeozoic basement. According to Carmignani low-angle extensional tectonics began between Serravallian and early Messinian, thinning the Apennine nappe stack. At the end of Middle Pliocene, syn-rift deposition ceased in the Viareggio Basin (west of the investigated area) as demonstrated by Argnani and co-workers, and high-angle extensional tectonics migrated eastward up to the Monte Albano Ridge. A syn-rift continental sedimentary wedge developed in Late Pliocene–Early Pleistocene, until its hanging wall block was dismembered, during late Early Pleistocene, by NE-dipping faults, causing the uplift of its western portion (the Pisani Mountains). This breakup caused exhumation and erosion of Triassic units whose clastics where shed into the surrounding palaeo-Arno Valley in alluvial–fluvial deposits unconformably overlying the Lower Pleistocene syn-rift deposits. In the late Pleistocene SW–NE-trending fault systems created the steep southeastern edge of the Pisani Mountains and the resulting throw is recorded in Middle Pleistocene deposits across the present Arno Valley. This tectonic phase probably continues at present, offshore Livorno, as evidenced by the epicentres of earthquakes.     

Integrated magnetobiochronology of the Pliocene–Pleistocene Miyazaki succession,southern Kyushu,southwest Japan: Implications for an Early Pleistocene hiatus and defining the base of the Gelasian (P/P boundary type section) in Japan

An integrated magnetobiochronology of the Miyazaki Pliocene–Pleistocene succession in the Miyazaki area, southwest Japan, was established using planktic foraminiferal and calcareous nannofossil biostratigraphy together with paleomagnetic data. The upper Miyazaki succession in the northern Miyazaki region can be divided into the Takanabe, Hisamine (redefined), and Higoyashiki (new) Formations, in ascending order. A depositional hiatus between the Hisamine Formation and the Takanabe and/or older formations was also identified based on integrated magnetobiostratigraphy from five sections including the Nagatani River (NGT) section through the uppermost Miyazaki succession. The hiatus, herein called the Hisamine unconformity, is equivalent to the Kurotaki unconformity between the Miura and Kazusa groups of the Boso Peninsula in central Japan. The depositional hiatus recognised in the lower Pleistocene of Pacific coastal areas in southwestern and central Japan may have resulted from tectonic activity associated with a change in the subduction direction of the Philippine Sea plate, which commenced prior to ca. 2.2 Ma. The youngest unit just below the hiatus is the upper part of the Takanabe Formation in the NGT section. The NGT section represents the continuous Late Pliocene to earliest Pleistocene sequence including the Gauss/Matuyama boundary and is here proposed as the type section for the Pliocene/Pleistocene boundary in Japan, which the IUGS ratified as the base of the Gelasian in 2009.     

Hydrocarbon source rock potential evaluation of the Late Paleocene Patala Formation,Salt Range,Pakistan: Organic geochemical and palynofacies approach

Organic geochemical and palynofacies analyses were carried out on shale intervals of the Late Paleocene Patala Formation at Nammal Gorge Section, western Salt Range, Pakistan. The total organic carbon content and Rock-Eval pyrolysis results indicated that the formation is dominated by type II and type III kerogens. Rock-Eval \({T}_{\mathrm{max}}\) vs. hydrogen index (HI) and thermal alteration index indicated that the analysed shale intervals present in the formation are thermally mature. \(S_{1}\) and \(S_{2}\) yields showed poor source rock potential for the formation. Three palynofacies assemblages including palynofacies-1, palynofacies-2 and palynofacies-3 were identified, which are prone to dry gas, wet gas and oil generation, respectively. The palynofacies assessment revealed the presence of oil/gas and gas prone type II and type III kerogens in the formation and their deposition on proximal shelf with suboxic to anoxic conditions. The kerogen macerals are dominated by vitrinite and amorphinite with minor inertinite and liptinite. The kerogen macerals are of both marine and terrestrial origin, deposited on a shallow shelf. Overall, the dark black carbonaceous shales present within the formation act as a source rock for hydrocarbons with poor-to-moderate source rock quality, while the grey shales act as a poor source rock for hydrocarbon generation.     

Reconstruction of burial history of eroded Mesozoic strata using kimberlite shale xenoliths,volcaniclastic and crater facies,Northwest Territories,Canada

Reconstruction of Mesozoic and Cenozoic sedimentary ‘cover’ on the Precambrian shield in the Lac de Gras diamond field, Northwest Territories, Canada, has been achieved using Cretaceous and early Tertiary sedimentary xenoliths and contemporaneous organic matter preserved in volcaniclastic sediments associated with late Cretaceous to early Tertiary kimberlite pipe intrusions, and in situ, Eocene crater lake, lacustrine and peat bog strata. Percent reflectance in oil (%Ro) of vitrinite within shale xenoliths for: (i) Albian to mid-Cenomanian to Turonian ranges from > 0.27 to 0.42 %Ro (mean = 0.38 %Ro), (ii) Maastrichtian to early Paleocene from 0.24 to < 0.30%; (iii) latest Paleocene to early middle Eocene 0.15 to < 0.23 %Ro (mean = 0.18 %Ro). These levels of thermal maturity are corroborated by Rock Eval pyrolysis T_max (°C) and VIS region fluorescence of liptinites, with wavelengths of maximum emission for sporinite, prasinophyte alginite and dinoflagellates consistent with vitrinite reflectance of 0.20 to < 0.50 %Ro. Burial–thermal history modeling, constrained by measured vitrinite reflectance and porosity of shale xenoliths, predicts a maximum burial temperature for Mid to Late Albian strata (∼115 Ma) of 60 °C with ∼1.2 to 1.4 km of Cretaceous strata in the Lac de Gras kimberlite field region prior to major uplift and erosion, which began at 90 Ma. Late Paleocene to middle Eocene volcanic crater lake lacustrine to peat bog strata were only buried to a few hundreds of meters and are in a peat-brown coal stage of thermal maturation.     

Precambrian iron formations from the Cauvery Suture Zone,Southern India: Implications for sub-marine hydrothermal origin in Neoarchean and Neoproterozoic convergent margin settings

Thick horizons of iron formations including Banded Iron Formations (BIFs) and Banded Silicate Formations (BSFs) occur as E–W trending bands in the eastern part of Cauvery Suture Zone (CSZ) in the Sothern Granulite Terrane of India. Some of these occur in close association with the Neoarchean-Neoproterozoic suprasubduction zone complexes, where as some others are associated with metamorphosed accretionary sequences including pyroxene granulites and other high grade rocks. The iron formations are highly deformed and metamorphosed under amphibolite to granulite facies conditions and are composed of quartz–magnetite–hematite–goethite–garnet–pyrite together with grunerite and pyroxene. Here we report the geochemical characteristics of twenty representative samples from the iron formations that reveal a widely varying composition with Fe₂O₃^(t) (22–65 wt.% as total iron) total- Fe₂O₃/TiO₂ (205–6532), MnO/TiO₂ (0.25–12.66) and SiO₂ (33–85 wt.%), broadly representing the two types of iron formations. These formations also show very low Al/(Al + Fe + Mn) ratio (0.001–0.01), Al₂O₃ (0.07–0.76 wt.%), Al₂O₃/TiO₂ ratio (2.7–21), MgO (0.01–4.41 wt.%), CaO (0.1–1.24 wt.%), Na₂O (0.01–0.05 wt.%) and K₂O (0.01 wt.%) together with low total REE (3.38–31.63 ppm). The trace and REE elemental distributions show wide variation with high Ni (274 ppm), and Zn contents (up to 87 ppm) when compared to mafic volcanics of the adjoining areas. Tectonic discrimination plots indicate that the iron formations of the Cauvery Suture Zone are of hydrothermal origin. Their chondrite normalized patterns show slight positive Eu anomaly (Eu/Eu* = up to 1.77) and relatively less fractionation of REE with slight LREE enrichment compared to HREE. However, the PAAS (Post Archean Average of Australian Sediments) normalized REE patterns display significant positive Eu anomaly (Eu/Eu* up to 2.32) with well represented negative Ce anomalies (Ce/Ce* = 0.66–1.28). The above results together with petrological characteristics and available geochronology of the associated lithologies suggest that the iron formations can be correlated to Algoma-type. The Fe and Si were largely supplied by medium to high temperature sub-marine hydrothermal systems in Neoarchean and Neoproterozoic convergent margin settings.     

In-situ LA–ICP-MS trace elemental analyses of magnetite: The late Palaeoproterozoic Sokoman Iron Formation in the Labrador Trough,Canada

The Sokoman Iron Formation in the Labrador Trough, Canada, a typical granular iron formation (GIF), is coeval with the ~ 1.88 Ga Nimish volcanic suites in the same region. It is composed of the Lower, Middle and Upper Iron Formations. In addition to primary and altered magnetite in iron formations of the Hayot Lake, Rainy Lake and Wishart Lake areas, magnetite in volcanic breccia associated with the iron formation is identified for the first time in the stratigraphy. Trace elemental compositions of the most primary, altered and volcanic brecciated magnetite of the Sokoman Iron Formation were obtained by LA–ICP-MS. Commonly detected trace elements of magnetite include Ti, Al, Mg, Mn, V, Cr, Co and Zn. These three types of magnetite have different trace elemental compositions. Primary magnetite in the iron formation has a relatively narrow range of compositions with the depletion of Ti, Pb, Mg and Al. Magnetite from volcanic breccia is rich in Ti, Al, V, Mn, Mg, Zn, Cu and Pb, indicative of crystallization from mantle-derived magmas. Altered magnetite in the iron formation shows a relatively wide range of trace elemental compositions. Mineralizing fluids associated with magmas that generated the ~ 1.88 Ga Nimish volcanic suites circulated through the sedimentary piles to further enrich the iron formations and to form magnetite with variable compositions. The comparisons of different types of primary and altered magnetite in the iron formation in the region show distinct provenance discrimination. Our findings also support the origin of iron formations in association with multiple stages of exhalative volcanic and hydrothermal processes.     

A Cretaceous dike swarm provides evidence of a spreading axis in the back-arc basin of the Kohistan paleo-island arc,northwestern Himalaya,Pakistan

A 100–4000 m wide and 15 km long dike swarm, consisting of basalt and dolerite, occurs at the base of the Thelichi Formation in the Kohistan paleo-island arc terrane, north Pakistan. The dikes contain hornblende (altered from diopsidic-augite), diopsidic-augite (relics; ophitic to subophitic texture), chlorite, epidote, sphene, apatite, zircon, ilmenite, titanomagnetite and magnetite. The geochemistry reveals two groups of dikes: (1) Higher TiO₂ (2.74–3.50 wt%), Na₂O, Fe₂O₃ and lower Al₂O₃ (12.65–14.16 wt%) and MgO (3.73–5.04 wt%); (2) Lower TiO₂ (1.24–2.05 wt%), Na₂O, Fe₂O₃ and higher Al₂O₃ (14.02–16.52 wt%) and MgO (3.98–7.52 wt%). The MgO contents (3.73–7.52-wt%) show a variation in the dikes from relatively primitive to more evolved compositions. The dikes contain high amounts of both LILE and HFSE. The major, trace and rare-earth elements data confirm the MORB affinity and the back-arc basin origin of the dike swarm. The NW–SE orientation of the dike swarm and its 134 ± 3 Ma K–Ar age suggest the spreading axis of the back-arc basin in the Early Cretaceous.     

Source potential and palynofacies of Late Jurassic “Lemeš facies”, Croatia

Laminated limestone and calcareous shale outcrop samples from the Late Jurassic “Leme?” facies (Croatia) were investigated to characterize their organic facies and palynofacies and their hydrocarbon generative potential. The results indicate that the organic rich sediments of “Leme?” facies were deposited within a relatively shallow marine environment at low redox potential, characterized as an oxygen depleted depositional setting with stratified bottom waters of the carbonate platform (Adriatic Carbonate Platform). The organic rich samples contain a high portion of lipid rich amorphous kerogen of algal/phytoplankton origin, enriched by bacterial biomass. Most of the analyzed samples have total organic carbon contents (TOC) greater than 3%, Rock-Eval S2 >20 mg HC/g rock, yielding Hydrogen Index (HI) values ranging from 509–602 mg HC/g TOC. According to these results, the analyzed samples have very good to excellent oil generative potential. Relatively high sulfur content suggests that the kerogen is best described as Type II-S. Biomarker maturity parameters, as well as the fluorescence of the isolated kerogen, show that the organic matter is at early to peak oil thermal maturity. The observed level of thermal maturity indicates that these samples were once buried to depths of ～5.5–5.8 km before being uplifted in the late Tertiary. The surface outcrops of the “Leme?” facies suggest that these strata have significant source potential and are the likely source of oil in the Croatian External Dinarides.     

Source rock potential of selected Cretaceous shales,Orange Basin,South Africa

Twenty Cretaceous shale samples from two wells in the Orange Basin of South Africa were evaluated for their source rock potential. They were sampled from within a 1400 m-thick sequence in boreholes drilled through Lower to Upper Cretaceous sediments. The samples exhibit total organic carbon (TOC) content of 1.06–2.17%; Rock-Eval S2 values of 0.08–2.27 mg HC/g; and petroleum source potential (SP), which is the sum of S1 and S2, of 0.10–2.61 mg HC/g, all indicating the presence of poor to fair hydrocarbon generative potential. Hydrogen index (HI) values vary from 7 to 128 mg HC/g organic carbon and oxygen index (OI) ranges from 37 to 195 mg CO₂/g organic carbon, indicating predominantly Type III kerogen with perhaps minor amounts of Type IV kerogen. The maturity of the samples, as indicated by T _max values of 428–446°C, ranges from immature to thermally mature with respect to oil generation. Measured vitrinite reflectance values (%Ro) of representative samples indicate that these samples vary from immature to mature, consistent with the thermal alteration index (TAI) (spore colour) and fluorescence data for these samples. Organic petrographic analysis also shows that amorphous organic matter is dominant in these samples. Framboidal pyrite is abundant and may be indicative of a marine influence during deposition. Although our Rock-Eval pyrolysis data indicate that gas-prone source rocks are prevalent in this part of the Orange Basin, the geochemical characteristics of samples from an Aptian unit at 3318 m in one of the wells suggest that better quality source rocks may exist deeper, in more distal depositional parts of the basin.     

Geochemical evaluation and thermal modeling of the Eocene–Oligocene Pabdeh and Middle Cretaceous Gurpi Formations in the northern part of the Dezful Embayment

Rock–Eval pyrolysis analysis, burial history, and 1D thermal maturity modeling have allowed the evaluation of the source rock potential, thermal maturation state, and impacts of the Pabdeh and Gurpi Formations in Cretaceous–Miocene petroleum system in the Naft Safid (NS) and Zeloi (ZE) oilfields, North Dezful Embayment. The total organic carbon (TOC) content of the Pabdeh and Gurpi Formations ranges from 0.2 to 4.7 wt% and 0.3 to 5.3 wt%, respectively. S2 values of the Pabdeh Formation in the ZE and NS oilfields vary from 0.41 to 13.77 and 0.29 to 14.5 mg HC (Hydrocarbon)/g rock, with an average value of 4.48 and 4.14 mg HC/g rock, respectively. These values for the Gurpi Formation in the ZE and NS oilfields range from 0.31 to 16.96 and 0.26 to 1.44 mg HC/g rock, with an average value of 8.54 and 2.43 mg HC/g rock, respectively. The S2 versus TOC diagram reveals a fair to good hydrocarbon generation potential of the Pabdeh Formation and poor to fair potential of the Gurpi Formation. The high values of S2 (S2 > S1) for samples of the both formations in the ZE and NS oilfields show that the samples are not contaminated with petroleum generated from underlying source rocks. The samples of the Pabdeh Formation in the ZE oilfield are characterized by a relatively narrow range of activation energy values with principal activation energy of 46 kcal/mol and frequency factor of 5.27 × 10⁺¹¹ s^?1. It seems that the high sulfur content of the Pabdeh organic matter probably caused the frequency factor and principal activation energy to be lower than usual. Hydrogen index (HI) values of the Pabdeh and Gurpi Formations in the ZE oilfield vary from 71 to 786 and 97 to 398 mg HC/g TOC, with an average value of 310 and 277 mg HC/g TOC, respectively. These values in the NS oilfield range from 66 to 546 and 51 to 525 mg HC/g TOC, with an average value of 256 and 227 mg HC/g TOC, respectively. Plot of HI vs. T _max value indicates that the majority of the Pabdeh and Gurpi samples contain predominantly type II kerogen and their organofacies are directly related to the more homogeneous precursor materials. Based on thermal maturity modeling results, kinetic parameters, and Rock–Eval analysis, both formations in the ZE and NS oilfields are thermally mature and immature or early mature stage, respectively.     

Evidence for SEDEX-style mineralization in the 1.7 Ga Tawallah Group,McArthur Basin,Australia

The Paleoproterozoic McArthur Basin (McArthur Group) of northern Australia hosts world-class sedimentary ‘exhalative’ (SEDEX) McArthur type Zn–Pb deposits, which are largely hosted within a sequence of 1.64 Ga pyritic carbonaceous shales deposited in an extensional rift setting. A well-known example of these is McArthur River (or Here's Your Chance [HYC] Zn–Pb–Ag deposit). The ~ 1.78 Ga McDermott and ~ 1.73 Ga Wollogorang formations (Tawallah Group) both contain carbonaceous shales deposited in similar environments. Our observations suggest the carbonaceous facies of the Wollogorang Formation were deposited under mostly euxinic conditions, with periodically-high concentrations of sedimentary pyrite deposition. The carbonaceous shales in the older McDermott Formation contain considerably less early pyrite, reflecting a mostly sulfide-poor, anoxic depositional environment. Localized fault-bound sub-basins likely facilitated lateral facies variations, which is evident from synsedimentary breccias.The presence of evaporitic oxidized facies within the McDermott and Wollogorang formations, alongside evidence for synsedimentary brecciation in reduced shales are favourable criteria for SEDEX-style base metal deposition. Both formations overlie volcanic units, which could have been sources of base metals. Detailed X-ray petrography, new geochemical data and sulfur isotope data from historical drill cores indicate multiple horizons of stratiform and sediment breccia-hosted base metal sulfide within carbonaceous shale units, with high-grade Zn concentrations. A close association between sphalerite and ferromanganean dolomite alteration draws comparisons with younger SEDEX mineralization at HYC. Additionally, SEDEX alteration indices, used demonstrably as a vector to the younger orebodies, indicate the sedimentary rocks analyzed in this study are marginally below the ore window when compared to the overlying mineralized stratigraphy.Our data imply that localized active circulation of metalliferous brines occurred in the Tawallah Group basin. High-grade sulfide deposition in reduced facies alteration may represent distal expressions of larger SEDEX-style deposits. Furthermore, abundant pyrite and high molybdenum in the Wollogorang Formation suggest the global oceanic sulfate concentration was sufficient by ~ 1.73 Ga to engender intermittent but strong bottom-water euxinia during shale deposition, thus providing a robust chemical trap for base metal sulfide mineralization.     

The Bazhenov Horizon of West Siberia: structure,correlation, and thickness

The type sections of the Bazhenov Horizon and formations recognized within this horizon have been identified based on a comprehensive analysis of paleontological, lithological, geophysical (well-log and CDP seismic data), and geochemical data on the West Siberian Basin. The Bazhenov Horizon was traced throughout the entire West Siberian sedimentary basin. The criteria for the recognition of the top and base of this horizon within the stratigraphic equivalents of the Bazhenov Formation were suggested. The proposed facies-stratigraphic zonation of the Bazhenov Horizon reflects the spatial location of all formations identified within this horizon. As seen on the newly proposed thickness map, the Bazhenov Horizon reaches a thickness of 15-25 m within the Bazhenov and Tutleim Formations, 30-35 m within the Mulym’ya Formation, 30-45 m within the Danilov Formation, 40-65 m within the Mar’yanovka Formation, up to 100 m within the Golchikha Formation, > 350 m within the Yanovstan Formation, up to 35 m within the Bagan Formation, and 35-40 m within the Maksimkin Yar Formation. A marginal filter (according to A.P. Lisitzin) has been identified along the East Siberian land.     

Comparative studies of organic matter petrography of the late palaeozoic black shales from Southwestern Poland

There are at least two sapropelic units associated with Late Palaeozoic black shales in Central Europe. The older unit, of Late Carboniferous age, is the lower part of the Anthracosia Shales in the Intrasudetic Basin, and the younger one is the well-known Zechstein Kupferschiefer in both the Foresudetic Monocline and the Northsudetic Basin. The first unit is of lacustrine origin, while the second one represents deposition in a shallow marine depositional environment. Both units contain high amounts of organic matter, thus being typical black shales.The organic matter dispersed in these shales was studied petrographically. In general, the vitrinite reflectance of the shales studied indicates variable, but moderate organic matter maturity (0.68–1.25%), equivalent to the oil window. Detailed microscopic studies of the organic material dispersed in the lower unit of the Anthracosia Shales showed that liptinite, especially alginite is the most abundant component. Secondary altered organic matter, i.e. solid hydrocarbons, rarely occurs. Organic components together with mineral matter constitute a lacustrine sapropelic association, a humic (terrestrial) association and an intermediary association. The character and predominance of alginite and lacustrine sapropelic association are indicative of an open-lacustrine depositional environment. In general, this organic composition is typical of type I kerogen.Microscopic analysis of the Kupferschiefer revealed a mixture of liptinite, vitrinite and inertinite macerals, and other organic components such as amorphous sapropelic mass (ASM) and solid bitumens. The most common organic components are liptinite macerals. Bituminite and alginite predominate, and are diagnostic macerals of this unit. The amount of bituminite locally exceeds 85 vol.%. Other liptinite macerals such as sporinite and liptodetrinite, are present in significantly lower amounts, one exception being ASM, which may be present in higher amounts. Humic constituents (vitrinite and inertinite) are rare, present in small amounts in the Kupferschiefer beds. The organic matter composition points to type II kerogen for this unit.     

From convergent plate margin to arc–continent collision: Formation of the Kenting Mélange,Southern Taiwan

The Kenting Mélange on the Hengchun Peninsula, Taiwan, formed through tectonic shearing of subduction complex lithologies, probably within the plate boundary subduction channel between the Eurasian and Philippine Sea plates, with further deformation and exhumation in the Pliocene–Pleistocene during arc–continent collision. Field relations reveal a structural gradation from normal stratified turbidite sequence (Mutan Formation) through broken formation to highly sheared Kenting Mélange containing allochthonous polygenic blocks. This gradation is consistent with an increase of average vitrinite reflection values from ~ 0.72% in the Mutan Formation through ~ 0.93% in the broken formation to ~ 0.99% in the mélange, suggesting temperatures of at least 140 °C during formation of the Kenting Mélange. Zircons from gabbro in the Kenting Mélange are dated as 25.46 ± 0.18 Ma, which together with geochemical data constrains the source to South China Sea oceanic lithosphere. In combination with the field relationships, vitrinite reflectance values, microfossil stratigraphy, and offshore geophysical data from S and SE Taiwan, we propose that the Kenting Mélange initially formed at the subduction plate boundary from off-scraped trench deposits. Minor Plio–Pleistocene microfossils (< 5%) occur within the mélange in proximity to slope basin of equivalent age and were likely sheared into the mélange during out-of-sequence thrusting associated with active arc–continent collision, which in the Hengchun Peninsula commenced after 6.5 Ma.     

An organic geochemical investigation on organic rich sediments from two Neogene formations in the Klias Peninsula area,West Sabah,Malaysia

Twenty organic rich outcrop samples from the Belait and Setap Shale formations in the Klias Peninsula area, West Sabah, were analysed by means of organic petrology and geochemical techniques. The aims of this study are to assess the type of organic matter, thermal maturity and established source rock characterization based primarily on Rock-Eval pyrolysis data. The shales of the Setap Shale Formation have TOC values varying from 0.6 wt%–1.54 wt% with a mean hydrogen index (HI) of 60.1 mg/g, whereas the shal...