The problem of inherited Ar* in dating impact glass by the Ar/Ar method: Evidence from the Tswaing impact crater (South Africa)

The Tswaing meteorite impact crater is a 1.13 km diameter structure located in the 2.05 Ga Nebo granite of the Bushveld Complex. The impact age had previously been determined by fission track dating to 220 ± 104 ka. ⁴⁰Ar/³⁹Ar step-heating and total fusion experiments performed on single- and multi-grain impact glass aliquots gave apparent ages ranging from 1.0 ± 0.3 Ma to 204 ± 6 Ma. These “ages” indicate that the radiogenic Ar derived from the target rocks has not been completely degassed as a result of the impact process, despite fusion of the target material. Results of step-heating experiments imply that the trapped within the glass is located in two distinct reservoirs thought to be the glass matrix and fluid/vapor inclusions (or un-melted residual clasts). Calculations assuming an age of 0.2 ± 0.1 Ma for Tswaing (fission track data) reveal that the amount of inherited ⁴⁰Ar*() relative to the pre-impact concentration varies from 0.015% to 4.15%. The spread defined by likely reflects the various quench rates experienced by the glass, most certainly due to the pre-impact position of the sample relative to the center of the crater. We compare the influence of on the apparent ⁴⁰Ar/³⁹Ar age determination of five impact structures. Our calculations show that the main characteristic controlling the age offset (for a given proportion of ) is the age difference between the impact and the target rocks (i.e., the ⁴⁰Ar* concentration in the target rock). The buffer effect for a given crater structure can be predicted knowing the age of the basement and having a rough estimation of the age of the crater structure itself. The occurrence of is likely influenced by (1) the degree of polymerization (i.e., silicate structure complexity) of the target rock and presumably related to the diffusivity of Ar in the melt and glass, (2) the Ar partial pressure at the grain boundary, (3) the quantity of energy involved in the impact, and (4) the porosity of the target rocks. For glass that inevitably suffers inherited and/or excess ⁴⁰Ar*, the use of the inverse isochron technique can be appropriate but should be applied with careful statistical treatment.     

Complexation of Cu in Hydrothermal NaCl Brines: Ab initio molecular dynamics and energetics

Chloride complexation of Cu⁺ controls the solubility of copper(I) oxide and sulfide ore minerals in hydrothermal and diagenetic fluids. Solubility measurements and optical spectra of high temperature CuCl solutions have been interpreted as indicating the formation of CuCl, , and complexes. However, no other monovalent cation forms tri- and tetrachloro complexes. EXAFS spectra of high temperature Cu-Cl solutions, moreover, appear to show only CuCl and complexes at T > 100 °C. To reconcile these results, I investigated the nature and stability of Cu-Cl complexes using ab initio cluster calculations and ab initio (Car-Parrinello) molecular dynamics simulations for CuCl-NaCl-H₂O systems at 25 to 450 °C. Ab initio molecular dynamic simulations of 1 m CuCl in a 4 m Cl solution give a stable complex at 25 °C over 4 ps but show that the third Cl⁻ is weakly bound. When the temperature is increased along the liquid-vapour saturation curve to 125 °C, the complex dissociates into and Cl⁻; only forms at 325 °C and 1 kbar. Even in a 15.6 m Cl brine at 450 °C, only the complex forms over a 4 ps simulation run.Cluster calculations with a static dielectric continuum solvation field (COSMO) were used in an attempt directly estimate free energies of complex formation in aqueous solution. Consistent with the MD simulations, the complex is slightly stable at 25 °C but decreases in stability with decreasing dielectric constant (ε). The complex is predicted to be unstable at 25 °C and becomes increasingly unstable with decreasing dielectric constant. In hydrothermal fluids (ε < 30) both the and complexes are unstable to dissociation into and Cl⁻.The results obtained here are at odds with recent equations of state that predict and complexes are the predominant species in hydrothermal brines. In contrast, I predict that only complexes will be significant at T > 125 °C, even in NaCl-saturated brines. The high-temperature (T > 125 °C) optical spectra of CuCl solutions and solubility measurements of Cu minerals in Cl-brines need to be reinterpreted in terms of only the CuCl and complexes.     

Olivine/melt transition metal partitioning, melt composition, and melt structure—Influence of Al for Si substitution in the tetrahedral network of silicate melts

The influence on olivine/melt transition metal (Mn, Co, Ni) partitioning of substitution in the tetrahedral network of silicate melt structure has been examined at ambient pressure in the 1450-1550 °C temperature range. Experiments were conducted in the systems NaAlSiO₄-Mg₂SiO₄- SiO₂ and CaAl₂Si₂O₈-Mg₂SiO₄-SiO₂ with about 1 wt% each of MnO, CoO, and NiO added. These compositions were used to evaluate how, in silicate melts, substitution and ionization potential of charge-balancing cations affect activity-composition relations in silicate melts and mineral/melt partitioning.The exchange equilibrium coefficient, , is a positive and linear function of melt Al/(Al + Si) at constant degree of melt polymerization, NBO/T. The is negatively correlated with the ionic radius, r, of the M-cation and also with the ionization potential (Z/r², Z = electrical charge) of the cation that serves to charge-balance Al³⁺ in tetrahedral coordination in the melts. The activity coefficient ratio, (γ_M/γ_Mg)^melt, is therefore similarly correlated.These melt composition relationships are governed by the distribution of Al³⁺ among coexisting Q-species in the peralkaline (depolymerized) melts coexisting with olivine. This distribution controls Q-speciation abundance, which, in turn, controls (γ_M/γ_Mg)^melt and . The relations between melt structure and olivine/melt partitioning behavior lead to the suggestion that in natural magmatic systems mineral/melt partition coefficients are more dependent on melt composition and, therefore, melt structure the more alkali-rich and the more felsic the melt. Moreover, mineral/melt partition coefficients are more sensitive to melt composition the more highly charged or the smaller the ionic radius of the cation of interest.     

Sorption of yttrium and rare earth elements by amorphous ferric hydroxide: Influence of solution complexation with carbonate

The influence of solution complexation on the sorption of yttrium and the rare earth elements (YREEs) by amorphous ferric hydroxide was investigated at 25 °C over a range of pH (4.0-7.1) and carbonate concentrations . Distribution coefficients, defined as , where [MS_i]_T is the total concentration of sorbed YREE, M_T is the total YREE concentration in solution, and [S_i] is the concentration of amorphous ferric hydroxide, initially increased in magnitude with increasing carbonate concentration, and then decreased. The initial increase of is due to sorption of YREE carbonate complexes , in addition to sorption of free YREE ions (M³⁺). The subsequent decrease of , which is more extensive for the heavy REEs, is due to the increasing intensity of YREE solution complexation by carbonate ions. The competition for YREEs between solution complexation and surface complexation was modeled via the equation:

     

The solubility of platinum and gold in NaCl brines at 1.5 kbar, 600 to 800°C: A laser ablation ICP-MS pilot study of synthetic fluid inclusions

The concentration and distribution of Pt and Au in a fluid-melt system has been investigated by reacting the metals with S-free, single-phase aqueous brines (20, 50, 70 wt% eq. NaCl) ± peraluminous melt at a confining pressure of 1.5 kbar and temperatures of 600 to 800 °C, trapping the fluid in synthetic fluid inclusions (quartz-hosted) and vesicles (silicate melt-hosted), and quantifying the metal content of the trapped fluid and glass by laser ablation ICP-MS. HCl concentration was buffered using the assemblage albite-andalusite-quartz and fO₂ was buffered using the assemblage Ni-NiO. Over the range of experimental conditions, measured concentrations of Pt and Au in the brines (, ) are on on the order of 1-10³ ppm. Concentrations of Pt and Au in the melt (, ) are ∼35-100 ppb and ∼400-1200 ppb, respectively. Nernst partition coefficients (, ) are on the order of 10²-10³ and vary as a function of (non-Henry’s Law behavior). Trapped fluids show a significant range of metal concentrations within populations of inclusions from single experiments (∼ 1 log unit variability for Au; ∼2-3 log unit variability for Pt). Variability in metal concentration within single inclusion groups is attributed to premature brine entrapment (prior to metal-fluid-melt equilibrium being reached); this allows us to make only minimum estimates of metal solubility using metal concentrations from primary inclusions. The data show two trends: (i) maximum and average values of and in inclusions decrease ∼2 orders of magnitude as fluid salinity () increases from ∼4 to 40 molal (20 to 70 wt % eq. NaCl) at a constant temperature; (ii) maximum and average values of increase approximately 1 order of magnitude for every 100°C increase temperature at a fixed . The observed behavior may be described by the general expression:

     

The effect of sulfur on the partitioning of Ni and other first-row transition elements between olivine and silicate melt

The effect of sulfur dissolved as sulfide (S²⁻) in silicate melts on the activity coefficients of NiO and some other oxides of divalent cations (Ca, Cr, Mn, Fe and Co) has been determined from olivine/melt partitioning experiments at 1400 °C in six melt compositions in the system CaO-MgO-Al₂O₃-SiO₂ (CMAS), and in derivatives of these compositions at 1370 °C, obtained from the six CMAS compositions by substituting Fe for Mg (FeCMAS). Amounts of S²⁻ were varied from zero to sulfide saturation, reaching 4100 μg g⁻¹ S in the most sulfur-rich silicate melt. The sulfide solubilities compare reasonably well with those predicted from the parameterization of the sulfide capacity of silicate melts at 1400 °C of O’Neill and Mavrogenes (2002), although in detail systematic deviations indicate that a more sophisticated model may improve the prediction of sulfide capacities.The results show a barely discernible effect of S²⁻ in the silicate melt on Fe, Co and Ni partition coefficients, and also surprisingly, a tiny but resolvable effect on Ca partitioning, but no detectable effect on Cr, Mn or some other lithophile incompatible elements (Sc, Ti, V, Y, Zr and Hf). Decreasing Mg# of olivine (reflecting increasing FeO in the system) has a significant influence on the partitioning of several of the divalent cations, particularly Ca and Ni. We find a remarkably systematic correlation between and the ionic radius of M²⁺, where M = Ca, Cr, Mn, Fe, Co or Ni, which is attributable to a simple relationship between size mismatch and excess free energies of mixing in Mg-rich olivine solid solutions.Neither the effect of S²⁻ nor of Mg#^ol is large enough by an order of magnitude to account for the reported variations of obtained from electron microprobe analyses of olivine/glass pairs from mid-ocean ridge basalts (MORBs). Comparing these MORB glass analyses with the Ni-MgO systematics of MORB from other studies in the literature, which were obtained using a variety of analytical techniques, shows that these electron microprobe analyses are anomalous. We suggest that the reported variation of with S content in MORB is an analytical artifact.Mass balance of melt and olivine compositions with the starting compositions shows that dissolved S²⁻ depresses the olivine liquidus of haplobasaltic silicate melts by 5.8 × 10⁻³ (±1.3 × 10⁻³) K per μg g⁻¹ of S²⁻, which is negligible in most contexts. We also present data for the partitioning of some incompatible trace elements (Sc, Ti, Y, Zr and Hf) between olivine and melt. The data for Sc and Y confirm previous results showing that and decrease with increasing SiO₂ content of the melt. Values of average 0.01 with most falling in the range 0.005-0.015. Zr and Hf are considerably more incompatible than Ti in olivine, with and about 10⁻³. The ratio / is well constrained at 0.611 ± 0.016.     

Dissociation constants and speciation in aqueous Li2SO4 and K2SO4 from measurements of electrical conductance to 673 K and 29 MPa

The electrical conductivities of aqueous solutions of Li₂SO₄ and K₂SO₄ have been measured at 523-673 K at 20-29 MPa in dilute solutions for molalities up to 2 × 10⁻² mol kg⁻¹. These conductivities have been fitted to the conductance equation of Turq, Blum, Bernard, and Kunz with a consensus mixing rule and mean spherical approximation activity coefficients. In the temperature interval 523-653 K, where the dielectric constant, ε, is greater than 14, the electrical conductance data can be fitted by a solution model which includes ion association to form , , and , where M is Li or K. The adjustable parameters of this model are the first and second dissociation constants of the M₂SO₄. For the 673 K and 300 kg m⁻³ state point where the Coulomb interactions are the strongest (dielectric constant, ε = 5), models with more extensive association give good fits to the data. In the case of the Li₂SO₄ model, including the multi-ion associate, , gave an extremely good fit to the conductance data.     

A potentiometric study of the stability of aqueous yttrium-acetate complexes from 25 to 175 °C and 1-1000 bar

The stability of yttrium-acetate (Y-Ac) complexes in aqueous solution was determined potentiometrically at temperatures 25-175 °C (at P_s) and pressures 1-1000 bar (at 25 and 75 °C). Measurements were performed using glass H⁺-selective electrodes in potentiometric cells with a liquid junction. The species YAc²⁺ and were found to dominate yttrium aqueous speciation in experimental solutions at 25-100 °C (log [Ac⁻] < −1.5, pH < 5.2), whereas at 125, 150 and 175 °C introduction of into the Y-Ac speciation model was necessary. The overall stability constants β_n were determined for the reaction

     

Microbial ammonia oxidation and enhanced nitrogen cycling in the Endeavour hydrothermal plume

Ammonium was injected from the subseafloor hydrothermal system at the Endeavour Segment, Juan de Fuca Ridge, into the deep-sea water column resulting in an -rich (?177 nM) neutrally buoyant hydrothermal plume. This was quickly removed by both autotrophic ammonia oxidation and assimilation. The former accounted for at least 93% of total net removal, with its maximum rate in the neutrally buoyant plume (?53 nM d⁻¹) up to 10-fold that in background deep water. Ammonia oxidation in this plume potentially added 26-130 mg into the deep-sea water column. This oxidation process was heavily influenced by the presence of organic-rich particles, with which ammonia-oxidizing bacteria (AOB) were often associated (40-68%). AOB contributed up to 10.8% of the total microbial communities within the plume, and might constitute a novel lineage of β-proteobacterial AOB based on 16S rRNA and amoA phylogenetic analyses. Meanwhile, assimilation rates were also substantially enhanced within the neutrally buoyant plume (?26.4 nM d⁻¹) and accounted for at least 47% of total net removal rates. The combined oxidation and assimilation rates always exceeded total net removal rates, suggesting active in situregeneration rates of at least an order of magnitude greater than the particulate nitrogen flux from the euphotic zone. Ammonia oxidation is responsible for turnover of 0.7-13 days and is probably the predominant in situ organic carbon production process (0.6-13 mg C m⁻² d⁻¹) at early stages of Endeavour neutrally buoyant plumes.     

An XAS study of the structure and thermodynamics of Cu(I) chloride complexes in brines up to high temperature (400 °C, 600 bar)

The transport and deposition of copper in saline hydrothermal fluids are controlled by the stability of copper(I) complexes with ligands such as chloride. Despite their role in the formation of most hydrothermal copper deposits, the nature and stability of Cu(I) chloride complexes in highly saline brines remains controversial. We present new X-ray absorption data (P = 600 bar, T = 25-400 °C, salinity up to 17.2 m Cl), which indicate that the linear (x = 1, 2) complexes are stable up to supercritical conditions. Distorted trigonal planar complexes predominate at room temperature and at high salinity (>3 m LiCl): subtle changes in the XANES spectrum with increasing salinity may reflect geometric distortions of this complex. Similar changes were observed in UV-Vis data [Liu, W., Brugger, J., McPhail, D.C., Spiccia, L., 2002. A spectrophotometric study of aqueous copper(I) chloride complexes in LiCl solutions between 100 °C and 250 °C. Geochim. Cosmochim. Acta66, 3615-3633], and were erroneously interpreted as a new species, . Our XAS data and ab-initio XANES calculations show that this tetrahedral species is not present to any significant degree in our solutions. The stability of the complexe decreases with increasing temperature; under supercritical conditions and in brines under magmatic-hydrothermal conditions (e.g., 15.58 m Cl, 400 °C, 600 bar), only the linear Cu(I) chloride complexes were observed. This result and the instability of the complex are also consistent with the recent ab-initio molecular dynamic calculations of Sherman [Sherman D. M.(2007) Complexation of Cu⁺ in hydrothermal NaCl brines: ab-initio molecular dynamics and energetics. Geochim. Cosmochim. Acta71, 714-722]. This study illustrates the power of the quantitative nature of XANES and EXAFS measurements for deciphering the speciation of weak transition metal complexes up to magmatic-hydrothermal conditions.The systematic XANES data are used to retrieve the formation constant for at 150 °C, which is in good agreement with the reinterpretation of the UV-Vis data of Liu et al. (Liu et al., 2002). At high temperatures (?400 °C), the solubility of chalcopyrite in equilibrium with hematite-magnetite-pyrite and K-feldspar-muscovite-quartz calculated with the new properties is lower than that calculated using the previous model, and the calculated solubilities are at the lower end of the range of values measured in brine inclusions from porphyry copper systems.     

Coprecipitation of chromate with calcite: Batch experiments and X-ray absorption spectroscopy

Batch experiments, combined with in situ spectroscopic methods, are used to examine the coprecipitation of Cr(VI) with calcite, including partitioning behavior, site-specific distribution of Cr on the surface of calcite single crystals, and local coordination of Cr(VI) in the calcite structure. It is found that the concentration of Cr incorporated in calcite increases with increasing Cr concentration in solution. The calculated apparent partition coefficient, , is highest at low Cr solution concentration, and decreases to a constant value with increasing Cr solution concentration. DIC images of the surface of calcite single crystals grown in the presence of exhibit well-defined growth hillocks composed of two pairs of symmetrically nonequivalent vicinal faces, denoted as + and −, which reflect the orientation of structurally nonequivalent growth steps. Micro-XRF mapping of the Cr distribution over a growth hillock shows preferential incorporation of Cr into the—steps, which is considered to result from differences in surface structure geometry. XANES spectra confirm that incorporated Cr is hexavalent, and no reduction of Cr(VI) in the X-ray beam was observed up to 2 days at room temperature. EXAFS fit results show the incorporated Cr(VI) has the expected first shell of 4 O at ∼1.64 ± 0.01 Å, consistent with . Best fit results show that the second shell is split with ∼2.5 Ca at ∼3.33 ± 0.05 and ∼2.2 Ca at ∼3.55 ± 0.05 Å, which confirms the incorporation of chromate into calcite. Consideration of possible local coordination indicates that significant distortion or disruption is required to accommodate in the calcite structure.     

Modeling the effects of bond environment on equilibrium iron isotope fractionation in ferric aquo-chloro complexes

Four or five sets of ab initio models, including Unrestricted Hartree Fock (UHF) and hybrid Density Functional Theory (DFT) are calculated for each species in a series of aqueous ferric aquo-chloro complexes: , , , FeCl₃(H₂O)₃, FeCl₃(H₂O)₂, , FeCl₅H₂O²⁻, , ) in order to determine the relative isotopic fractionation among the complexes, to compare the results of different models for the same complexes, to examine factors that influence the magnitude of the isotopic fractionation, and to compare bond-partner-driven fractionation with redox-driven fractionation.Relative to , all models show a nearly linear decrease in ⁵⁶Fe/⁵⁴Fe as the number of Cl⁻ ions per Fe³⁺ ion increases, with slopes of −0.8‰ to −1.0‰ per Cl⁻ at 20 °C. At 20 °C, 1000 ln β (β = ⁵⁶Fe/⁵⁴Fe reduced partition function ratio relative to a dissociated Fe atom) values range from 8.93‰ to 9.73‰ for , 8.04-9.12‰ for , 7.61-8.73‰ for , 7.14-8.25‰ for , and 3.09-4.41‰ for . The fractionation between and ranges from 1.5‰ to 2.6‰, depending on the model; this is comparable in magnitude to fractionation effects due to Fe³⁺/Fe²⁺ redox reactions. β values from the UHF models are consistently higher than those from the hybrid DFT models.Isotopic fractionation is shown to be sensitive to differences in ligand bond stiffness (above), coordination number, bond length, and the frequency of the asymmetric Fe-X stretching vibrational mode, as predicted by previous theoretical studies. Complexes with smaller coordination numbers have higher 1000 ln β (7.46‰, 5.25‰, and 3.48‰ for , ,, respectively, from the B3LYP/6-31G(d) model). Species with the same number of chlorides but fewer waters also show the effect of coordination number on 1000 ln β: (7.46‰ vs. 7.05‰ for FeCl₃(H₂O)₂ vs. FeCl₃(H₂O)₃ and 5.25‰ vs. 4.94‰ for vs. FeCl₅H₂O²⁻ with the B3LYP/6-31G(d) model). As more Fe-Cl bonds substitute for Fe-OH₂ bonds (with a resulting decrease in β), the lengths of the Fe-Cl bonds and the Fe-O bonds increase.Preliminary modeling of shows an Fe³⁺/Fe²⁺ fractionation of 3.2‰ for the B3LYP/6-31G(d) model, in agreement with previous studies. The addition of an explicit outer hydration sphere of 12 H₂O molecules to models of improves agreement with measured vibrational frequencies and bond lengths; 1000 ln β increases by 0.8-1.0‰. An additional hydration sphere around increases 1000 ln β by only 0.1‰.Isotopic fractionations predicted for this simple system imply that ligands present in an aqueous iron environment are potentially important drivers of fractionation, and suggest that significant fractionation effects are likely in other aqueous systems containing sulfides or organic ligands. Fractionation effects due to both speciation and redox must be considered when interpreting iron isotope fractionations in the geological record.     

Copper partitioning in a melt-vapor-brine-magnetite-pyrrhotite assemblage

The effect of sulfur on the partitioning of Cu in a melt-vapor-brine ± magnetite ± pyrrhotite assemblage has been quantified at 800 °C, 140 MPa, f_O2 = nickel-nickel oxide (NNO), logf_S2=-3.0 (i.e., on the magnetite-pyrrhotite curve at NNO), logf_H2S=-1.3 and logf_SO2=-1. All experiments were vapor + brine saturated. Vapor and brine fluid inclusions were trapped in silicate glass and self-healed quartz fractures. Vapor and brine are dominated by NaCl, KCl and HCl in the S-free runs and NaCl, KCl and FeCl₂ in S-bearing runs. Pyrrhotite served as the source of sulfur in S-bearing experiments. The composition of fluid inclusions, glass and crystals were quantified by laser-ablation inductively coupled plasma mass spectrometry. Major element, chlorine and sulfur concentrations in glass were quantified by using electron probe microanalysis. Calculated Nernst-type partition coefficients (±2σ) for Cu between melt-vapor, melt-brine and vapor-brine are , , and , respectively, in the S-free system. The partition coefficients (±2σ) for Cu between melt-vapor, melt-brine and vapor-brine are , , and , respectively, in the S-bearing system. Apparent equilibrium constants (±1σ) describing Cu and Na exchange between vapor and melt and brine and melt were also calculated. The values of are 34 ± 21 and 128 ± 29 in the S-free and S-bearing runs, respectively. The values of are 33 ± 22 and60 ± 5 in the S-free and S-bearing runs, respectively. The data presented here indicate that the presence of sulfur increases the mass transfer of Cu into vapor from silicate melt. Further, the nearly threefold increase in suggests that Cu may be transported as both a chloride and sulfide complex in magmatic vapor, in agreement with hypotheses based on data from natural systems. Most significantly, the data demonstrate that the presence of sulfur enhances the partitioning of Cu from melt into magmatic volatile phases.