The C1XS X-ray Spectrometer on Chandrayaan-1

The Chandrayaan-1 X-ray Spectrometer (C1XS) is a compact X-ray spectrometer for the Indian Space Research Organisation (ISRO) Chandrayaan-1 lunar mission. It exploits heritage from the D-CIXS instrument on ESA's SMART-1 mission. As a result of detailed developments to all aspects of the design, its performance as measured in the laboratory greatly surpasses that of D-CIXS. In comparison with SMART-1, Chandrayaan-1 is a science-oriented rather than a technology mission, leading to far more favourable conditions for science measurements. C1XS is designed to measure absolute and relative abundances of major rock-forming elements (principally Mg, Al, Si, Ca and Fe) in the lunar crust with spatial resolution ?25 FWHM km, and to achieve relative elemental abundances of better than 10%.     

Chandrayaan-1 X-ray Spectrometer (C1XS)—Instrument design and technical details

The UK-built Chandrayaan-1 X-ray Spectrometer (C1XS) is flying as an ESA instrument on India's Chandrayaan-1 mission to the Moon. The Chandrayaan-1 mission launched on the 22nd October 2008 and entered a 100 km polar lunar orbit on the 12th November 2008. C1XS builds on experience gained with the earlier D-CIXS instrument on SMART-1, but will be a technically much more capable instrument. Here we describe the instrument design.     

Lunar X-ray fluorescence observations by the Chandrayaan-1 X-ray Spectrometer (C1XS): Results from the nearside southern highlands

The Chandrayaan-1 X-ray Spectrometer (C1XS) flown on-board the first Indian lunar mission Chandrayaan-1, measured X-ray fluorescence spectra during several episodes of solar flares during its operational period of ∼9 months. The accompanying X-ray Solar Monitor (XSM) provided simultaneous spectra of solar X-rays incident on the Moon which are essential to derive elemental chemistry. In this paper, we present the surface abundances of Mg, Al, Si, Ca and Fe, derived from C1XS data for a highland region on the southern nearside of the Moon. Analysis techniques are described in detail including absolute X-ray line flux derivation and conversion into elemental abundance. The results are consistent with a composition rich in plagioclase with a slight mafic mineral enhancement and a Ca/Al ratio that is significantly lower than measured in lunar returned samples. We suggest various possible scenarios to explain the deviations.     

First results from the TGRS high-resolution GRB Spectrometer

The Transient Gamma Ray Spectrometer (TGRS) is a 215 cm³ passivelycooled germanium detector designed primarily to study spectral features of gamma ray bursts. Since shortly after its launch on 1994 Nov. 1 it has been producing high-resolution spectra of GRBs and solar flares. Some of these spectra are presented here.Although it has not yet detected any line features in GRBs-none were expected so early in the mission-several bursts have been seen simultaneously by TGRS, the Konus instruments on the same spacecraft, and the BATSE instrument on Compton GRO. A comparison of the spectra obtained by these various instruments, as presented here, may resolve the question of whether line features actually exist, and if so provide detailed spectroscopy to determine their physical origin.     

The scientific rationale for the C1XS X-ray spectrometer on India's Chandrayaan-1 mission to the moon

The UK-built Chandrayaan-1 X-ray Spectrometer (C1XS) will fly as an ESA instrument on India's Chandrayaan-1 mission to the Moon, launched in October 2008. C1XS builds on experience gained with the earlier D-CIXS instrument on SMART-1, but will be a scientifically much more capable instrument. Here we describe the scientific objectives of this instrument, which include mapping the abundances of the major rock-forming elements (principally Mg, Al, Si, Ti, Ca and Fe) in the lunar crust. These data will aid in determining whether regional compositional differences (e.g., the Mg/Fe ratio) are consistent with models of lunar crustal evolution. C1XS data will also permit geochemical studies of smaller scale features, such as the ejecta blankets and central peaks of large impact craters, and individual lava flows and pyroclastic deposits. These objectives all bear on important, and currently unresolved, questions in lunar science, including the structure and evolution of any primordial magma ocean, as revealed by vertical and lateral geochemical variations in the crust, and the composition of the lunar mantle, which will further constrain theories of the Moon's origin, thermal history and internal structure.     

The D-CIXS X-ray spectrometer on the SMART-1 mission to the Moon—First results

The SMART-1 mission has recently arrived at the Moon. Its payload includes D-CIXS, a compact X-ray spectrometer. SMART-1 is a technology evaluation mission, and D-CIXS is the first of a new generation of planetary X-ray spectrometers. Novel technologies enable new capabilities for measuring the fluorescent yield of a planetary surface or atmosphere which is illuminated by solar X-rays. During the extended SMART-1 cruise phase, observations of the Earth showed strong argon emission, providing a good source for calibration and demonstrating the potential of the technique. At the Moon, our initial observations over Mare Crisium show a first unambiguous remote sensing of calcium in the lunar regolith. Data obtained are broadly consistent with current understanding of mare and highland composition. Ground truth is provided by the returned Luna 20 and 24 sample sets.     

Elemental Abundances in the Solar Corona as Measured by the X-ray Solar Monitor Onboard Chandrayaan-1

The X-ray Solar Monitor (XSM) on the Indian lunar mission Chandrayaan-1 was flown to complement lunar elemental abundance studies by the X-ray fluorescence experiment C1XS. XSM measured the ≈?1.8?–?20 keV solar X-ray spectrum during its nine months of operation in lunar orbit. The soft X-ray spectra can be used to estimate absolute coronal abundances using intensities of emission-line complexes and the plasma temperature derived from the continuum. The best estimates are obtained from the brightest flare observed by XSM: a C2.8-class flare. The well-known first-ionization potential (FIP) effect is observed; abundances are enhanced for the low-FIP elements Fe, Ca, and Si, while the intermediate-FIP element S shows values close to the photospheric abundance. The derived coronal abundances show a quasi-mass-dependent pattern of fractionation.     

The Hard X-ray Imaging Spectrometer (HXIS)

The HXIS, a joint instrument of the Space Research Laboratory at Utrecht, The Netherlands, and the Department of Space Research of the University of Birmingham, U.K., images the Sun in hard X-rays: Six energy bands in energy range 3.5–30 keV, spatial resolution 8 over Ø 240 and 32 over Ø 624 field of view, and time resolution of 0.5–7 s depending on the mode of operation. By means of a flare flag it alerts all the other SMM instruments when a flare sets in and informs them about the location of the X-ray emission. The experiment should yield information about the position, extension and spectrum of the hard X-ray bursts in flares, their relation to the magnetic field structure and to the quasi-thermal soft X-rays, and about the characteristics and development of type IV electron clouds above flare regions.     

New Solar Broad-Band Hard X-Ray Spectrometer: First Results

The scientific and operational aims of the Czech-made Hard X-Ray Spectrometer (HXRS) launched onboard the U.S. Department of Energy Multispectral Thermal Imager satellite (MTI), on 12 March 2000 are discussed. The principal operating characteristics of the instrument such as the temporal resolution, energy band selection, spectral sensitivity, and the in-flight calibration procedure are described as well as the technical details of the spectrometer including detectors, shielding (against charged particles) and electronic design. The MTI host satellite and its orbit are briefly described. Recent observations by the 3 GHz Ondřejov radiometer are compared with HXRS data to demonstrate one example of the HXRS data utilization: the temporal relation between hard X-rays and radio emission. These results show relatively long time delays (2–14 s) of the GHz broadband radio pulses relative to the hard X-ray emission peaks. Access to the HXRS data base via the Internet is provided.     

EURONEAR: First results

The European Near Earth Asteroid Research (EURONEAR) is a project which envisions to build a coordinated network which will follow-up and recover potentially hazardous asteroids (PHAs) and near earth asteroids (NEAs). We aim to include in EURONEAR two automated 1 m telescopes located in Chile and Europe, in addition to other non-permanent facilities. Astrometry will be the main aim of the project in order to secure and follow-up newly discovered NEAs, also to recover PHAs at their second or following oppositions, while photometry of bright PHAs will bring information on their physical properties. In this paper, first we review briefly the existent and past NEAs programs. Next, we include the results obtained in 2006 from three observing runs at Pic du Midi using the 1 m telescope, Haute-Provence employing the 1.2 m telescope, and Bucharest using a small 23 cm telescope. These add a total of 153 positions for 16 PHAs and NEAs, which were accepted by Minor Planet Center. Recently, a 1 m telescope was allocated by ESO in La Silla to be automated and used as the Southern dedicated facility by EURONEAR.     

The Ooty synthesis radio telescope: First results

A 4-km synthesis radio telescope has recently been commissioned at Ootacamund, India for operation at 327 MHz. It consists of the Ooty Radio Telescope (530 m × 30 m) and 7 small antennas which are distributed over an area of about 4 km × 2 km. It has a coverage of about ± 40‡ in declination δ. The beam-width is about 40 arcsec × 90 arcsec at δ = 0‡ and about 40 arcsec × 50 arcsec at δ = 40‡. The sensitivity attained for a 5:1 signal-to-noise ratio is about 15 m Jy after a 10-hour integration. The observational programmes undertaken and some of the results obtained recently are summarized. The radio halo around the edge-on spiral NGC 4631 is found to have a larger scale-height at 327 MHz than is known at higher frequencies. Mapping of interesting radio galaxies at 327 MHz is being carried out; preliminary results for 0511-305 (∼2 Mpc) and 1333-337 (∼750 kpc) are summarized. The very-steep-spectrum radio source in the Abell cluster A85 is found to be resolved; since it has no obvious optical counterpart, it is conceivable that it is a remnant of past activity of a galaxy that has drifted away in about 10⁹ years.     

Data processing for the Active Particle-induced X-ray Spectrometer and initial scientific results from Chang'e-3 mission

The Active Particle-induced X-ray Spectrometer(APXS) is an important payload mounted on the Yutu rover, which is part of the Chang'e-3 mission. The scientific objective of APXS is to perform in-situ analysis of the chemical composition of lunar soil and rock samples. The radioactive sources,55 Fe and109Cd, decay and produce α-particles and X-rays. When X-rays and α-particles interact with atoms in the surface material, they knock electrons out of their orbits, which release energy by emitting X-rays that can be measured by a silicon drift detector(SDD). The elements and their concentrations can be determined by analyzing their peak energies and intensities. APXS has analyzed both the calibration target and lunar soil once during the first lunar day and again during the second lunar day. The total detection time lasted about 266 min and more than 2000 frames of data records have been acquired. APXS has three operating modes: calibration mode, distance sensing mode and detection mode. In detection mode, work distance can be calculated from the X-ray counting rate collected by SDD. Correction for the effect of temperature has been performed to convert the channel number for each spectrum to X-ray energy. Dead time correction is used to eliminate the systematic error in quantifying the activity of an X-ray pulse in a sample and derive the real count rate. We report APXS data and initial results during the first and second lunar days for the Yutu rover. In this study, we analyze the data from the calibration target and lunar soil on the first lunar day. Seven major elements, including Mg, Al, Si, K, Ca, Ti and Fe, have been identified. Comparing the peak areas and ratios of calibration basalt and lunar soil the landing site was found to be depleted in K, and have lower Mg and Al but higher Ca, Ti, and Fe. In the future,we will obtain the elemental concentrations of lunar soil at the Chang'e-3 landing site using APXS data.     

The sunlit lunar atmosphere: A comprehensive study by CHACE on the Moon Impact Probe of Chandrayaan-1

The altitudinal/latitudinal profile of the lunar atmospheric composition on the sunlit side was unraveled for the first time by the Chandra’s Altitudinal Composition Explorer (CHACE) on the Moon Impact Probe, a standalone micro-satellite that impacted at the lunar south pole, as a part of the first Indian mission to Moon, Chandrayaan-1. Systematic measurements were carried out during the descent phase of the impactor with an altitude resolution of ∼250 m and a latitudinal resolution of ∼0.1°. The overall pressure on the dayside and the neutral composition in the mass range 1-100 amu have been measured by identifying 44 and 18 amu as the dominant constituents. Significant amounts of heavier (>50 amu) species also have been detected, the details of which are presented and discussed.     

First Results from the Soho Ultraviolet Coronagraph Spectrometer

The SOHO Ultraviolet Coronagraph Spectrometer (UVCS/SOHO) is being used to observe the extended solar corona from 1.25 to 10 R⊙ from Sun center. Initial observations of polar coronal holes and equatorial streamers are described. The observations include measurements of spectral line profiles for HI Lα and Lβ, Ovi 1032 Å and 1037 Å, Mgx 625 Å, Fexii 1242 Å and several others. Intensities for Mgx 610 Å, Sixii 499 Å, and 520 Å, Sx 1196 Å, and 22 others have been observed. Preliminary results for derived H⁰, O⁵⁺, Mg₉₊, and Fe¹¹⁺ velocity distributions and initial indications of outflow velocities for O⁵⁺ are described. In streamers, the H⁰ velocity distribution along the line of sight (specified by the value at e^-1, along the line of sight) decreases from a maximum value of about 180 km s^-1 at 2 R⊙ to about 140 km s^-1 at 8 R⊙. The value for O⁵⁺ increases with height reaching a value of 150 km s^-1 at 4.7 R⊙. In polar coronal holes, the O⁵⁺ velocity at e^-1 is about equal to that of H⁰ at 1.7 R⊙ and significantly larger at 2.1 R⊙. The O⁵⁺ in both streamers and coronal holes were found to have anisotropic velocity distributions with the smaller values in the radial direction.     

Solar X-ray Spectrometer (Soxs) Mission on Board GSAT2 Indian Spacecraft: The Low-Energy Payload

The first space-borne solar astronomy experiment of India, namely Solar X-ray Spectrometer (SOXS), was successfully launched on 08 May 2003 on board geostationary satellite GSAT-2 of India. The SOXS is composed of two independent payloads, viz. SOXS Low-Energy Detector (SLD) Payload and SOXS High-Energy Detector (SHD) Payload. The SOXS aims to study the full-disk integrated X-ray emission in the energy range from 4 keV to 10 MeV. In this paper we present the first report on the SLD instrumentation and its in-orbit performance. The SLD payload was designed and developed at the Physical Research Laboratory in collaboration with various centers of Indian Space Research Organisation (ISRO). The basic scientific aim of the SLD payload is to study solar flares in the energy range from 4 to 60 keV with high spectral and temporal resolution. To meet these requirements, the SLD payload employs state-of-the-art solid state detectors, the first time for a solar astronomy experiment, viz. Si PIN (4 –25 keV), and cadmium–zinc–telluride (4 –60 keV). With their superb high-energy resolution characteristics, SLD can observe iron and iron–nickel complex lines that are visible only during solar flares. In view of its 3.4 FOV, the detector package is mounted on a Sun Aspect System, for the first time, to get uninterrupted observations in a geostationary orbit. The SLD payload configuration, its in-flight operation, and the response of the detectors are presented. We also present the first observations of solar flares made by the SLD payload and briefly describe their temporal and spectral mode results.     

Resik: A Bent Crystal X-ray Spectrometer for Studies of Solar Coronal Plasma Composition

We describe the RESIK (REntgenovsky Spektrometr s Izognutymi Kristalami) instrument, consisting of two double-channel X-ray spectrometers, designed to observe solar active region and flare plasmas. RESIK is one of the instruments making up the scientific payload of the Russian CORONAS-F solar mission. The uncollimated spectrometer uses two silicon and two quartz bent crystals observing flare, active region and coronal spectra in four wavelength bands with a resolving power (/ ) of 1000. The wavelength coverage, 3.3–6.1 Å, includes emission lines of Si, S, Cl, Ar, and K and in the third diffraction order, the wavelength range includes He-like Fe lines (1.85 Å) and Ni lines (1.55 Å) with dielectronic satellites, emitted during intense, hot flares. The instrument is believed to be the best calibrated space-borne crystal spectrometer flown to date. The spectrometer dynamically adjusts the data gathering intervals from 1 s to 5 minutes, depending on the level of solar X-ray emission at the time of observation. The principal aims of RESIK are the measurements of relative and absolute element abundances in the emitting plasma and the temperature distribution of plasma (differential emission measure) over the temperature interval 3 and 50 MK. This paper summarizes the scientific objectives of RESIK and describes the design, characteristics, and performance of the instrument.     

The NST: First results and some lessons for ATST and EST

In January 2009, first light observations with the NST (New Solar Telescope) in Big Bear Solar Observatory (BBSO) were made. NST has a 1.7 m primary with a 1.6 m clear aperture. First observational results in TiO and Hα are shown and discussed. The NST primary mirror is the most aspheric telescope mirror deployed to date. The NST is early in its commissioning, and the plans for this phase will be sketched. Lessons learned in building and implementing the NST are germane for the ATST and EST telescopes and will be discussed. The NST has an off‐axis Gregorian configuration consisting of a parabolic primary, heat‐stop, elliptical secondary and diagonal flats. The focal ratio of the primary mirror is f/2.4. The working wavelength range covers from 0.4 to 1.7 µm in the Coudé Lab beneath the telescope and all wavelengths including the far infrared at the Nasmyth focus on the dome floor (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Slitless spectrograph for small telescopes: First results

A slitless UBVR spectrograph has been built for use on small telescopes. Test observations on the Zeiss-600 telescope at the Terskol peak demonstrated that the spectrograph is an efficient instrument for studying high-speed processes in variable stars with a high temporal resolution. The spectrograph resolving power R ≈ 100 in the vicinity of λ = 480 nm and the error in the determination of the wavelength is approximately 3 nm. The spectrograph provides a moderate signal-to-noise ratio for stars up to 16 ^m . It permits one to measure equivalent widths of unblended lines down to 0.1 nm. The developed special software based on the theory of quantum statistics makes it possible to detect relative variations in the spectrum of approximately 10^?5–10^?6 of the bolometric flux of the star. Observations with the spectrograph made it possible to detect variations of emissions in Balmer lines and Ca II H, K lines in the EV Lac flare star in the subsecond range. The spectroscopic monitoring permits one to study stellar flares with small amplitude, to carry out a comprehensive colorimetric analysis of flare plasma, and to determine temperatures and sizes of flares in the light intensity maximum. Observations of the transit of the HAT-P-1 B exoplanet demonstrate that the chromospheric activity power of the parent star does not vary during the transit. The slitless spectrograph with a low resolving capacity opens new prospects in studying active processes occurring on stars’ surfaces.