带断层地震数据的Delaunay三角剖分算法

数据网格化是三维地质建模的常用方法。断层是普遍的地质现象,带断层的海量数据三角剖分在建模中较为复杂。提出了一种简单的可以解决带断层地震数据Delaunay三角剖分的有效算法。该算法首先对数据边界进行初始Delaunay三角剖分,然后将其变尺度加密,生成较均匀三角网,最后将断层边界强行嵌入三角网,实现了三角网格化。      

岩体结构三维无缝建模与四面体优化剖分

复杂地质特征给数值模拟的建模工作带来很大困难,针对该问题,提出并实现了岩体结构三维无缝建模方法。将直接法拓展到四面体网格剖分中,实现了基于岩体结构无缝模型的四面体优化剖分方法,从而为数值模拟提供既符合地质实际,又有较高网格质量的计算模型。利用该方法建立了某拱坝坝肩岩体三维地质模型,并进行四面体优化剖分。     

计算机在地质体三维可视化中的运用

计算机技术的不断发展进步,使得在计算机上真实的再现三维图形成为现实。地质体的三维可视化技术其主要分析方法是在掌握地质的形态和属性等各方面特征后,采用基于体模型和面模型方法来建立三维模型。本文主要研究了面模型的实现方法。利用己有的勘探资料和三角剖分技术将层位离散化成三角网格,建立三维地质体块。地质体三维可视化技术的计算机实现方法主要意义在于表达和再现地质体与地质环境,进而辅助工程设计、施工与决策。     

有限元金属矿地震波场模拟中三角网的自动剖分与模型编辑①

区域的剖分及单元参数的赋值对于有限元模拟技术是一项十分烦琐的工作,特别是对于模型非固定的情况,本文针对这一问题进行了研究,在VB环境下,实现了分区三角网自动剖分及模型的编辑,为复杂金属矿地震模型的波场模拟提供了有效的工具。     

基于TetGen的复杂FLAC3D模型可视化建模方法

为了充分发挥FLAC3D在数值计算方面的优势,解决在复杂地质体条件下岩体工程开挖存在的计算模型构建难度大、多采用简化模型而影响计算结果可靠性及准确性的问题。提出采用三维表面模型重建方法建立地质体及岩体工程的表面模型,确定岩层、开挖等的封闭空间区域;在此基础上,通过约束德洛内四面体剖分的方法对三维表面模型形成的空间区域进行网格剖分。分析了网格生成器TetGen的输入、输出数据结构,确定表面模型数据至TetGen、TetGen网格划分结果至FLAC3D的对应关系,实现能够准确描述地质体与工程开挖的FLAC3D计算模型的构建。通过某大型深部开采铜矿的多个岩层和首采区3个盘区63个采场的模型构建实例,证明该方法简单、可行、有效并且健壮。     

用于油藏描述的三维地质体剖分及体积计算方法

针对计算机模拟中的关键问题，即三维地质体的剖分和体积计算方法进行了较深入的讨论。在将地质体剖分为内部单元和边缘单元之后，又将内部单元细分为中间的长方柱体和两端的不规则多面体。通过分析，给出了计算内部单元和边缘单元不规则多面体的体积计算公式，并通过对两种理论模型的剖分和计算结果，说明了方法的正确性和提高精度的有效性     

潜水面变动的空间四面体单元网格自动生成方法

提出了一种由平面三角网格自动生成三维空间四面体单元网格的方法,其基本思路是将含水层平面分成三角形单元网格,将每个三角形沿垂直方向对应一个三棱柱,作为最初的三棱柱;依次将每个三棱柱按照潜水面位置和分层信息划分成不同数目的四面体,从而生成三维空间四面体单元网格。剖分结果表明,此方法综合考虑了潜水面的位置和各含水层顶底板的起伏情况,能够简洁地生成层面起伏的空间四面体网格,特别适用于刻画潜水面波动、含水层顶底板起伏和存在透镜体或岩性缺失等含水层结构复杂的情况下,自动地剖分并生成单元信息,为三维计算的实现奠定了基础。     

有限元金属矿地震波场模拟中三角网的自动剖分与模型编辑

区域的部分及单元参数的赋值对于有限元模拟技术是一项十分烦琐的工作,特别是对于模型非固定的情况,本文针对这一问题进行了研究,夺ＶＢ环境下,实现了分区三角网自动剖分及模型的编辑,为复杂金属矿地震模型的波场模拟提供了有效的工具。     

三角网格模型剖分方法的研究与应用

数值波场正演在地震学和勘探地球物理学领域正得到越来越广泛的应用,用一个好的方法来建立一个复杂的地质模型则显得尤为关键。三角网格模型相对于层状模型和矩形网格模型在反映地质界面形态、三角网格剖分个数调节及射线追踪速度等方面具有明显优势。利用三角网格剖分的建模方法,在VC2008编程环境下实现了复杂地质模型的描述。通过对复杂模型的建模测试,表明采用三角网格剖分方法,可解决以下模型难题：①对复杂模型界面的描述;②对复杂逆断层的描述;③对封闭块体的描述;④对模型弹性参数进行描述。     

一种改进的三维地质体模型存储与重构方法

目前,在不同的三维地质建模软件下建立的模型无法在统一的场景中集成显示和分析应用,数据交换共享难,数据存储量普遍较大。在现有的建模方法下,三维地质体的布尔运算比较困难。因此探索一种存储量小、易于数据共享交换与空间分析的三维存储方法是当前趋势。基于空间位置枚举法提出了一种存储量小、易于数据共享交换与空间分析的三维存储和重构方法。首先用任意已建好的地质模型建立栅格金字塔加快显示速度;在此基础上对地质模型进行剖分生成剖分长方体,再将剖分长方体存储成六位编码;最后对六位编码进行三维重构,利用Open GL技术基于VC++平台进行三维重绘。计算了重构模型的均方根误差(RMSE),其平均值为0. 39。实验结果表明:此存储与重构的方法是可行的,对减少三维地质体模型存储量、数据的迁移共享交换有一定的价值。     

The terrestrial fauna of the Late Triassic Pant-y-ffynnon Quarry fissures,South Wales,UK and a new species of Clevosaurus (Lepidosauria: Rhynchocephalia)

Pant-y-ffynnon Quarry in South Wales yielded a rich cache of fossils in the early 1950s, including articulated specimens of new species (the small sauropodomorph dinosaur Pantydraco caducus and the crocodylomorph Terrestrisuchus gracilis), but no substantial study of the wider fauna of the Pant-y-ffynnon fissure systems has been published. Here, our overview of existing specimens, a few described but mostly undescribed, as well as freshly processed material, provides a comprehensive picture of the Pant-y-ffynnon palaeo-island of the Late Triassic. This was an island with a relatively impoverished fauna dominated by small clevosaurs (rhynchocephalians), including a new species, Clevosaurus cambrica, described here from a partially articulated specimen and isolated bones. The new species has a dental morphology that is intermediate between the Late Triassic Clevosaurus hudsoni, from Cromhall Quarry to the east, and the younger C. convallis from Pant Quarry to the west, suggesting adaptive radiation of clevosaurs in the palaeo-archipelago. The larger reptiles on the palaeo-island do not exceed 1.5?m in length, including a small carnivorous crocodylomorph, Terrestrisuchus, and a possible example of insular dwarfism in the basal dinosaur Pantydraco.     

The effect of water on accessory phase solubility in subaluminous and peralkaline granitic melts

The solubilities of columbite, tantalite, wolframite, rutile, zircon and hafnon were determined as a function of the water contents in peralkaline and subaluminous granite melts. All experiments were conducted at 1035 °C and 2 kbar and the water contents of the melts ranged from nominally dry to approximately 6 wt.% H₂O. Accessory phase solubilities are not affected by the water content of the peralkaline melt. By contrast, solubilities are affected by the water content of the subaluminous melt, where the solubilities of all the accessory phases examined increase with the water content of the melt, up to 2 wt.% H₂O. At higher water contents, solubilities are nearly constant. It can be concluded that water is not an important control of accessory phase solubility, although the water content will affect diffusivities of components in the melt, thus whether or not accessory phases will be present as restite material. The solubility behaviour in the subaluminous and peralkaline melts supports previous spectroscopic studies, which have observed differences in the coordination of high field strength elements in dry vs. wet subaluminous granitic glasses, but not for peralkaline granitic glasses. Lastly, the fact that wolframite solubility increases with increasing water content in the subaluminous melt suggests that tungsten dissolved as a hexavalent species.     

Quaternary stresses revealed by calcite twinning inversion: insights from observations in the Savonnières underground quarry (eastern France)

Calcite samples were extracted both from the rock matrix and the superficial coating of a karstified fault plane of an underground quarry, located in the eastern border of the Paris basin. The karstification is dated as Quaternary. Analysis of mechanical calcite twinning reveals that only the calcite matrix has also undergone a compression trending WNW that can be attributed to the Mio-Pliocene alpine collision. Both coating and matrix have undergone a strike-slip regime with σ₁ roughly trending north–south, that could correspond to the regional present-day state of stress, a strike-slip compression rather trending NNW, modified by local phenomena. To cite this article: M. Rocher et al., C. R. Geoscience 335 (2003).     

HYDROGEOLOGY

正20141756 Chen Ruige(Mathematical College,China University of Geosciences,Beijing100083,China);Zhou Xun Numerical Simulation of Groundwater Level Fluctuation in a Coastal Confined Aquifer with Sloping Initial Groundwater Level Induced by the Tide(Geological Bulletin of China,ISSN1671-2552,CN11-4648/P,32(7),2013,p.1099-1104,6 illus.,16 refs.) Key words:confined water,groundwater level     

METAMORPHIC PETROLOGY

正20141408 Cai Jia(Institute of Geology,Chinese Academy of Geological Sciences,Beijing100037,China);Liu Fulai Petrogenesis and Metamorphic P-T Conditions of Garnet-Spinel-Biotitebearing Paragneiss in Danangou Area,Daqingshan-Wulashan Metamorphic Complex Belt(Acta Petrologica Sinica,ISSN1000-0569,CN11-1922/P,29(7),     

SERIALS

正~~     

GEOPHYSICAL EXPLORATION

正20142386An Guoying(China Aero Geophysical Survey and Remote Sensing Center for Land and Resources,Beijing 100083,China)Application of Satellite Remote Sensing in Regional Hydrogeological Investigation:Taking Cenozoic Strata in Wenquan Sheet(1∶250 000)of Karakoram Range as an Example(Geosci-     

QUATERNARY GEOLOGY & GEOMORPHOLOGY

正20141016An Chengbang(Key Laboratory of Western China’s Environmental Systems,Ministry of Education,Lanzhou University,Lanzhou 730000,China);Zhao Yongtao Lake Records during the Last Glacial Maximum from Xinjiang,NW China and Their Climatic Impli-     

PETROLEUM GEOLOGY

正20141538 Cao Qing(School of Earth Sciences and Engineering,Xi’an Petroleum University,Xi’an 710065,China);Zhao Jingzhou Characteristics and Significance of Fluid Inclusions from Majiagou Formation,Yichuan Huangling Area,Ordos Basin(Advances in Earth Science,ISSN1001-8166,CN62-1091/P,28(7),2013,p.819-828,7 illus.,3 tables,43 refs.)     

GEOCHEMISTRY

正20142002 Wei Hualing(Institute of Geophysical and Geochemical Exploration,Chinese Academy of Geological Sciences,Langfang065000,China);Zhou Guohua Element Content and Mineral Compositions in Different Sizes of Soil in Tongling Area,Anhui Province(Geological Bulletin of China,ISSN1671-2552,CN11-4648/P,32(11),2013,p.1861