Petrogenesis of the mafic igneous rocks of the Betic Cordilleras: A field, petrological and geochemical study

Mafic igneous rocks are widespread in the Nevado-Filábride Complex, the lowermost metamorphic unit of the internal zones of the Betic Cordilleras. They form intrusive, small, discontinuous bodies, predominantly dikes with subordinate small lava flows. The entire complex underwent alpine compressional metamorphism during the Paleogene continental collision, resulting in eclogites and blueschists in the mafic bodies and high-pressure assemblages in the intruded metasediments. Locally, weakly metamorphosed or completely unmetamorphosed igneous rocks with the same textural features occur as patches surrounded by eclogitized igneous rocks. The bulk rock chemistry of unmetamorphosed and completely metamorphosed mafic igneous rocks is consistent with an alkaline to transitional tholeiitic magmatism with typical within-plate geochemical characteristics. All but a few samples are nepheline normative and display REE and trace element characteristics typical of continental, rift-related magmatism. This conclusion is strongly supported by the mineral chemistry of the major constituents, in particular the calcic Ti-rich character of clinopyroxene, the lack of orthopyroxene, and the occurrence of kaersutitic amphibole. Incompatible trace element abundances and Sr and Nd isotopes support the provenance of these magmas from a variably metasomatized previously depleted sub-continental lithospheric mantle source. Received: 5 July 1999 / Accepted: 28 February 2000     

Relics of eclogite facies metamorphism in the Austroalpine basement,Hochgrössen (Speik complex), Austria

Summary Retrograde eclogites and serpentinites from the Hochgr?ssen massif, Styria, are parts of the Speik complex in the Austroalpine basement nappes of the Eastern Alps. They are in tectonic contact with pre-Alpine gneisses, amphibolites, and Permo-Triassic quartz phyllites (Rannach Series). The eclogites are derived from ocean-floor basalts with affinities to mid-ocean ridge and back-arc basin basalts. Fresh eclogites are rare and contain omphacite with a maximum of 39 mol% jadeite content, garnet (Py_15–19) and amphibole. Retrograde eclogites consist of amphibole and symplectites of Na-poor clinopyroxene (5–8 mol% Jd) + albite ± amphibole. Amphiboles are classified as edenite, pargasite, tschermakite, magnesiohornblende and actinolite. In relatively fresh eclogite, edenite is a common amphibole and texturally coexists with omphacite and garnet. An average temperature of 700 °C was obtained for eclogite facies metamorphism using garnet-pyroxene thermometry. A minimum pressure of 1.5 GPa is indicated by the maximum jadeite content in omphacite. Thermobarometric calculations using the TWEEQ program for amphibole in textural equilibrium with omphacite and garnet give pressures of 1.8–2.2 GPa at 700 °C. The equilibrium assemblage of Na-poor clinopyroxene, albite, amphibole and zoisite in the symplectites gives a pressure of about 0.6–0.8 GPa at 590–640 °C. ⁴⁰Ar/³⁹Ar radiometric dating of edenitic amphibole in textural equilibrium with omphacite gave a plateau age of 397.3 ± 7.8 Ma, and probably indicates retrograde cooling through the closure temperature for amphibole (∼500 °C). The age of the high-pressure metamorphism thus must be pre-Variscan and points to one of the earliest metamorphic events in the Austroalpine nappes known to date. Received June 11, 2000; revised version accepted January 2, 2001     

Sub-solidus Oligocene zircon formation in garnet peridotite during fast decompression and fluid infiltration (Duria, Central Alps)

Summary A garnet peridotite lens from Monte Duria (Adula nappe, Central Alps, Northern Italy) contains porphyroblastic garnet and pargasitic amphibole and reached peak metamorphic conditions of ∼830 C, ∼2.8 GPa. A first stage of near isothermal decompression to pressures <2.0 GPa is characterised by domains where fine grained spinel, clinopyroxene, orthopyroxene and amphibole form. The newly formed amphibole contains elevated levels of fluid mobile elements such as Rb, Ba and Pb indicating that recrystallization was assisted by infiltration of a crustal-derived fluid. Further decompression and cooling to ∼720 °C, 0.7–1.0 GPa associated with limited fluid influx is documented by the formation of orthopyroxene-spinel-amphibole symplectites around garnet. Zircon separated from this garnet peridotite exhibits two distinct zones. Domain 1 displays polygonal oscillatory zoning and high trace element contents. It contains clinopyroxene and amphibole inclusions with the same composition as the same minerals formed during the spinel peridotite equilibration, indicating that this domain formed under sub-solidus conditions during decompression and influx of crustal fluids. Domain 2 has no zoning and much lower trace element contents. It replaces domain 1 and is likely related to zircon recrystallization during the formation of the symplectites. SHRIMP dating of the two domains yielded ages of 34.2 ± 0.2 and 32.9 ± 0.3 Ma, respectively, indicating fast exhumation of the peridotite within the spinel stability field. We suggest that the Duria garnet peridotite originates from the mantle wedge above the tertiary subduction of the European continental margin and that it was assembled to the country rock gneisses between 34 and 33 Ma. Third author was Deceased     

Eo-Alpine HP metamorphism in the Permian intrusives from the steep belt of the central Alps (Languard-Campo nappe and Tonale Series)

Diorites and granitoids that intruded the Upper Austroalpine units of the central Alps during the Permian display mappable tectonic imprints and metamorphic transformations that were acquired during the Alpine tectonometamorphic cycle. Superposed heterogeneous deformations interacted with metamorphic re-equilibration stages and created a range of textural types that reflect local deformation gradients: coronitic transformations textures, normally foliated S-tectonites and mylonitic foliations. The three textural types are distinguished on maps recording foliation trajectories of successive deformation phases, which are correlated to the evolution of metamorphic assemblages. Tectonic deformation of Alpine age is represented by three generations of ductile syn-metamorphic structures. The mineral assemblages stable during the first Alpine deformation phase (D1) are Amp_II + Pl_II + white mica_I + Zo/Czo + Grt + Qtz ± Mg–Chl ± Ilm in metadiorites and Pl_II + white mica_I + Zo/Czo + Grt + Amp_II + Qtz ± Ilm/Ttn in metagranitoids; the successive foliations D2a and D2b are defined by greenschist facies minerals. Thermobarometric estimates allow T = 500–600 °C and P = 1.1 ± 0.2 GPa conditions to be determined during D1 and T ≤ 350 °C and P ≤ 0.5 GPa during D2. Relict igneous minerals in metadiorites allow to determine intrusive conditions of T = 879 ± 110 °C and P = 0.4–0.7 GPa. Radiometric ages and P/T ratio of Alpine P_maxT_Pmax suggest that the inferred P–T–d–t path may represent the thermal state of the initial Alpine subduction stages.     

The Finero phlogopite-peridotite massif: an example of subduction-related metasomatism

The Finero peridotite massif is a harzburgite that suffered a dramatic metasomatic enrichment resulting in the pervasive presence of amphibole and phlogopite and in the sporadic occurrence of apatite and carbonate (dolomite)-bearing domains. Pyroxenite (websterite) dykes also contain phlogopite and amphibole, but are rare. Peridotite bulk-rock composition retained highly depleted major element characteristics, but was enriched in K, Rb, Ba, Sr, LREE (light rare earth elements) (La_N/Yb_N = 8–17) and depleted in Nb. It has high radiogenic Sr (⁸⁷Sr/⁸⁶Sr₍₂₇₀₎ = 0.7055–0.7093), low radiogenic Nd (ɛNd₍₂₇₀₎= −1 to −3) and EMII-like Pb isotopes. Two pyroxenite – peridotite sections examined in detail show the virtual absence of major and trace element gradients in the mineral phases. In both rock types, pyroxenes and olivines have the most unfertile major element composition observed in Ivrea peridotites, spinels are the richest in Cr, and amphibole is pargasite. Clinopyroxenes exhibit LREE-enriched patterns (La_N/Yb_N ∼16), negative Ti and Zr and generally positive Sr anomaly. Amphibole has similar characteristics, except a weak negative Sr anomaly, but incompatible element concentration ∼1.9 (Sr) to ∼7.9 (Ti) times higher than that of coexisting clinopyroxene. Marked geochemical gradients occur toward apatite and carbonate-bearing domains which are randomly distributed in both the sections examined. In these regions, pyroxenes and amphibole (edenite) are lower in mg## and higher in Na₂O, and spinels and phlogopite are richer in Cr₂O₃. Both the mineral assemblage and the incompatible trace element characteristics of the mineral phases recall the typical signatures of “carbonatite” metasomatism (HFSE depletion, Sr, LILE and LREE enrichment). Clinopyroxene has higher REE and Sr concentrations than amphibole (^amph/cpxD_REE,Sr = 0.7–0.9) and lower Ti and Zr concentrations. It is proposed that the petrographic and geochemical features observed at Finero are consistent with a subduction environment. The lack of chemical gradients between pyroxenite and peridotite is explained by a model where melts derived from an eclogite-facies slab infiltrate the overhanging harzburgitic mantle wedge and, because of the special thermal structure of subduction zones, become heated to the temperature of the peridotite. If the resulting temperature is above that of the incipient melting of the hydrous peridotite system, the slab-derived melt equilibrates with the harzburgite and a crystal mush consisting of harzburgite and a silica saturated, hydrous melt is formed. During cooling, the crystal mush crystallizes producing the observed sequence of mineral phases and their observed chemical characteristics. In this context pyroxenites are regions of higher concentration of the melt in equilibrium with the harzburgite and not passage-ways through which exotic melts percolated. Only negligible chemical gradients can appear as an effect of the crystallization process, which also accounts for the high amphibole/clinopyroxene incompatible trace element ratios. The major element refractory composition is explained by an initially high peridotite/melt ratio. The apatite, carbonate-bearing domains are the result of the presence of some CO₂ in the slab-derived melt. The CO₂/H₂O ratio in the peridotite mush increased by crystallization of hydrous phases (amphibole and phlogopite) locally resulting in the unmixing of a late carbonate fluid. The proposed scenario is consistent with subduction of probably Variscan age and with the occurrence of modal metasomatism before peridotite incorporation in the crust. Received: 20 July 1998 / Accepted: 28 October 1998     

Phase relations and chemistry of Ti-rich K-richterite-bearing mantle assemblages: an experimental study to 8.0 GPa in a Ti-KNCMASH system

Experiments have been conducted in a peralkaline Ti-KNCMASH system representative of MARID-type bulk compositions to delimit the stability field of K-richterite in a Ti-rich hydrous mantle assemblage, to assess the compositional variation of amphibole and coexisting phases as a function of P and T, and to characterise the composition of partial melts derived from the hydrous assemblage. K-richterite is stable in experiments from 0.5 to 8.0 GPa coexisting with phlogopite, clinopyroxene and a Ti-phase (titanite, rutile or rutile + perovskite). At 8.0 GPa, garnet appears as an additional phase. The upper T stability limit of K-richterite is 1200–1250 °C at 4.0 GPa and 1300–1400 °C at 8.0 GPa. In the presence of phlogopite, K-richterite shows a systematic increase in K with increasing P to 1.03 pfu (per formula unit) at 8.0 GPa/1100 °C. In the absence of phlogopite, K-richterite attains a maximum of 1.14 K pfu at 8.0 GPa/1200 °C. Titanium in both amphibole and mica decreases continuously towards high P with a nearly constant partitioning while Ti in clinopyroxene remains more or less constant. In all experiments below 6.0 GPa ΣSi + Al in K-richterite is less than 8.0 when normalised to 23 oxygens+stoichiometric OH. Rutiles in the Ti-KNCMASH system are characterised by minor Al and Mg contents that show a systematic variation in concentration with P(T) and the coexisting assemblage. Partial melts produced in the Ti-KNCMASH system are extremely peralkaline [(K₂O+Na₂O)/Al₂O₃ = 1.7–3.7], Si-poor (40–45 wt% SiO₂), and Ti-rich (5.6–9.2 wt% TiO₂) and are very similar to certain Ti-rich lamproite glasses. At 4.0 GPa, the solidus is thought to coincide with the K-richterite-out reaction, the first melt is saturated in a phlogopite-rutile-lherzolite assemblage. Both phlogopite and rutile disappear ca. 150 °C above the solidus. At 8.0 GPa, the solidus must be located at T≤1400 ^°C. At this temperature, a melt is in equilibrium with a garnet- rutile-lherzolite assemblage. As opposed to 4.0 GPa, phlogopite does not buffer the melt composition at 8.0 GPa. The experimental results suggest that partial melting of MARID-type assemblages at pressures ≥4.0 GPa can generate Si-poor and partly ultrapotassic melts similar in composition to that of olivine lamproites. Received: 23 December 1996 / Accepted: 20 March 1997     

Corundum-bearing amphibolites from the metamorphic basement of the Krivaja–Konjuh ultramafic massif (Dinaride Ophiolite Zone, Bosnia)

Summary ?Corundum-bearing amphibolites are part of the metamorphic basement of the Krivaja–Konjuh ultramafic massif in the Dinaride Ophiolite Zone in Bosnia. Pinkish corundum occurs as porphyroblasts and together with edenitic–pargasitic hornblende and anorthite within the amphibolites. Based on major and trace element contents, the protoliths of the corundum-bearing amphibolites were tholeiitic gabbro cumulates. Geothermobarometric estimations on the corundum-bearing amphibolites yielded preliminary P–T conditions of 620–830 °C and 6–10 kbar for amphibole and plagioclase inclusions inside corundum and 4.5–8 kbar for the main metamorphic assemblage. These estimates are thought to reflect the metamorphic conditions achieved during the Late Jurassic obduction of the Krivaja–Konjuh ultramafic massif onto ophiolite mélange. This study documents the mineralogy, petrology and geochemistry of these unusual corundum-bearing ophiolite-related edenite–pargasitic amphibolites. Received June 20, 2002; accepted October 22, 2002     

Mobility of components in metasomatic transformation and partial melting of gneisses: an example from Sri Lanka

Reaction textures, fluid inclusions, and metasomatic zoning coupled with thermodynamic calculations have allowed us to estimate the conditions under which a biotite–hornblende gneiss from the Kurunegala district, Sri Lanka [hornblende (N_Mg=38–42) + biotite (N_Mg=42–44) + plagioclase + quartz + K-feldspar + ilmenite + magnetite] was transformed into patches of charnockite along shear zones and foliation planes. Primary fluid inclusion data suggest that two immiscible fluids, an alkalic supercritical brine and almost pure CO₂, coexisted during the charnockitisation event and subsequent post-peak metamorphic evolution of the charnockite. These metasomatic fluids migrated through the amphibolite gneiss along shear zones and into the wallrock under peak metamorphic conditions of 700–750 °C, 5–6 kbar, and a^fl _H2O=0.52–0.59. This resulted in the formation of charnockite patches containing the assemblage orthopyroxene (N_Mg=45–48) + K-feldspar (Or_70–80) + quartz + plagioclase (An₂₈) in addition to K-feldspar microveins along quartz and plagioclase grain boundaries. Remnants of the CO₂-rich fluid were trapped as separate fluid inclusions. The charnockite patches show the following metasomatic zonation patterns: – a transition zone with the assemblage biotite (N_Mg= 49–51) + hornblende (N_Mg = 47–50) + plagioclase + quartz + K-feldspar + ilmenite + magnetite; – a KPQ (K-feldspar–plagioclase–quartz) zone with the assemblage K-feldspar + plagioclase + orthopyroxene (N_Mg=45–48) + quartz + ilmenite + magnetite; – a charnockite core with the assemblage K-feldspar + plagioclase + orthopyroxene (N_Mg = 39–41) + biotite (N_Mg=48–52) + quartz + ilmenite + magnetite. Systematic changes in the bulk chemistry and mineralogy across the four zones suggest that along with metasomatic transformation, this process may have been complicated by partial melting in the charnockite core. This melting would have been coeval with metasomatic processes on the periphery of the charnockite patch. There is also good evidence in the charnockitic core that a second mineral assemblage, consisting of orthopyroxene (N_Mg= 36–42) + biotite (N_Mg=50–51) + K-feldspar (Or_70–80) + quartz + plagioclase (An_28–26), could have crystallised from a partial melt during cooling from 720 to 660 °C at decreasing a^fl _H2O from 0.67 to 0.5. Post-magmatic evolution of charnockite at T < 700 °C resulted in fluids being released during the crystallisation of the charnockitic core. These gave rise to the formation of late stage rim myrmekites along K-feldspar grain boundaries as well as late stage biotite, cummingtonite, and carbonates. Received: 15 September 1999 / Accepted: 8 June 2000     

Experimental comparison of trace element partitioning between clinopyroxene and melt in carbonate and silicate systems, and implications for mantle metasomatism

Experiments in the systems diopside-albite (Di-Ab) and diopside-albite-dolomite (Di-Ab-Dmt), doped with a wide range of trace elements, have been used to characterise the difference between clinopyroxene-silicate melt and clinopyroxene-carbonate melt partitioning. Experiments in Di-Ab-Dmt yielded clinopyroxene and olivine in equilibrium with CO₂-saturated dolomitic carbonate melt at 3 GPa, 1375 °C. The experiments in Di-Ab were designed to bracket those conditions (3 GPa, 1640 °C and 0.8 GPa, 1375 °C), and so minimise the contribution of differential temperature and pressure to partitioning. Partition coefficients, determined by SIMS analysis of run products, differ markedly for some elements between Di-Ab and Di-Ab-Dmt systems. Notably, in the carbonate system clinopyroxene-melt partition coefficients for Si, Al, Ga, heavy REE, Ti and Zr are higher by factors of 5 to 200 than in the silicate system. Conversely, partition coefficients for Nb, light REE, alkali metals and alkaline earths show much less fractionation (<3). The observed differences compare quantitatively with experimental data on partitioning between immiscible carbonate and silicate melts, indicating that changes in melt chemistry provide the dominant control on variation in partition coefficients in this case. The importance of melt chemistry in controlling several aspects of element partitioning is discussed in light of the energetics of the partitioning process. The compositions of clinopyroxene and carbonate melt in our experiments closely match those of near-solidus melts and crystals in CMAS-CO₂ at 3 GPa, suggesting that our partition coefficients have direct relevance to melting of carbonated mantle lherzolite. Melts so produced will be characterised by elevated incompatible trace element concentrations, due to the low degrees of melting involved, but marked depletions of Ti and Zr, and fractionated REE patterns. These are common features of natural carbonatites. The different behaviour of trace elements in carbonate and silicate systems will lead to contrasted styles of trace element metasomatism in the mantle. Received: 15 July 1999 / Accepted: 18 February 2000     

Stability range and decomposition of potassic richterite and phlogopite end members at 5–15 GPa

Summary The phase relations of K-richterite, KNaCaMg₅Si₈O₂₂(OH)₂, and phlogopite, K₃Mg₆ Al₂Si₆O₂₀(OH)₂, have been investigated at pressures of 5–15 GPa and temperatures of 1000–1500 °C. K-richterite is stable to about 1450 °C at 9–10 GPa, where the dp/dT-slope of the decomposition curve changes from positive to negative. At 1000 °C the alkali-rich, low-Al amphibole is stable to more than 14 GPa. Phlogopite has a more limited stability range with a maximum thermal stability limit of 1350 °C at 4–5 GPa and a pressure stability limit of 9–10 GPa at 1000 °C. The high-pressure decomposition reactions for both of the phases produce relatively small amounts of highly alkaline water-dominated fluids, in combination with mineral assemblages that are relatively close to the decomposing hydrous phase in bulk composition. In contrast, the incongruent melting of K-richterite and phlogopite in the 1–3 GPa range involves a larger proportion of hydrous silicate melts. The K-richterite breakdown produces high-Ca pyroxene and orthoenstatite or clinoenstatite at all pressures above 4 GPa. At higher pressures additional phases are: wadeite-structured K₂Si^VISi^IV ₃O₉ at 10 GPa and 1500 °C, wadeite-structured K₂Si^VISi^IV ₃O₉ and phase X at 15 GPa and 1500 °C, and stishovite at 15 GPa and 1100 °C. The solid breakdown phases of phlogopite are dominated by pyrope and forsterite. At 9–10 GPa and 1100–1400 °C phase X is an additional phase, partly accompanied by clinoenstatite close to the decomposition curve. Phase X has variable composition. In the KCMSH-system (K₂CaMg₅Si₈O₂₂(OH)₂) investigated by Inoue et al. (1998) and in the KMASH-system investigated in this report the compositions are approximately K₄Mg₈Si₈O₂₅(OH)₂ and K_3.7Mg_7.4Al_0.6Si_8.0O₂₅(OH)₂, respectively. Observations from natural compositions and from the phlogopite-diopside system indicate that phlogopite-clinopyroxene assemblages are stable along common geothermal gradients (including subduction zones) to 8–9 GPa and are replaced by K-richterite at higher pressures. The stability relations of the pure end member phases of K-richterite and phlogopite are consistent with these observations, suggesting that K-richterite may be stable into the mantle transition zone, at least along colder slab geotherms. The breakdown of moderate proportions of K-richterite in peridotite in the upper part of the transition zone may be accompanied by the formation of the potassic and hydrous phase X. Additional hydrogen released by this breakdown may dissolve in wadsleyite. Therefore, very small amounts of hydrous fluids may be released during such a decomposition. Received April 10, 2000; revised version accepted November 6, 2000     

Melt- versus fluid-induced metasomatism in spinel to garnet wedge peridotites (Ulten Zone, Eastern Italian Alps): clues from trace element and Li abundances

The peridotite bodies of the Ulten Zone (Upper Austroalpine, Italian Eastern Alps) are enclosed in Variscan migmatites and derive from a mantle wedge environment. They display the progressive transformation of porphyroclastic spinel peridotites (T=1,200°C; P=1.5 GPa) into fine-grained garnet–amphibole peridotites (T=850°C; P=3 GPa). Detailed bulk-rock and mineral trace element analyses of a sample suite documenting the entire metamorphic evolution of the peridotites revealed several stages of metasomatism. The spinel peridotites derive from a depleted mantle that became enriched in some large ion lithophile element (LILE) and light rare earth elements (LREE). The same signature pertains to clinopyroxene and orthopyroxene, indicating that this metasomatic signature was acquired at the recorded temperature of 1,200°C. Such a temperature is considerably above the wet peridotite solidus and hence the metasomatic agent must have been a hydrous melt. Moreover, the Li-enrichment of the spinel-facies pyroxenes (up to 24 ppm Li) reflects disequilibrium distribution after exchange with a presumably mafic melt. ^cpx/opx D _Li=3–7 and ^cpx/ol D _Li=2.7–8 indicate that the spinel-facies clinopyroxene hosts higher Li amounts than the coexisting minerals. LREE fractionation, variable LREE enrichment, LILE enrichment with respect to HFSE (average clinopyroxene Pb _N /Nb _N =16–90) in spinel lherzolites can be related to chromatographic effects of porous melt flow. The significant enrichment of pyroxenes from the spinel lherzolites in Pb, U and Li indicates that the metasomatic melt was subduction-related. All these features suggest that the spinel lherzolites formed a mantle wedge layer percolated by melts carrying recycled crustal components and rising from a deeper source of subduction magmas. The garnet + amphibole peridotites equilibrated at temperatures well below the wet solidus in the presence of an aqueous fluid. Bulk-rock trace element patterns display pronounced positive anomalies in Cs, Ba, Pb and U and moderate enrichment in Li, indicating addition of a crustal component to the mantle rocks. Amphibole hosts most of these trace elements. Clinopyroxene displays high LILE/HFSE (Pb _N /Nb _N =300–600), low Ce/Pb (1.4–2.7 in garnet-facies clinopyroxene compared with 2.6–24.5 in the spinel-facies one) and variable LILE and LREE enrichments. The coupled increase of modal amphibole, Sr and Pb, together with positive Pb–Sr and Pb–U correlations, further indicate that incompatible element influx in these samples was fluid-mediated. In the garnet-facies samples, amphibole and, interestingly, olivine have similarly high Li concentrations as clinopyroxene, leading to ^cpx/amph D _Li=0.7 and ^cpx/ol D _Li=0.7–0.8, the latter being up to ten times lower than in the spinel-facies rocks. Due to its high modal abundance, olivine is the main host of Li in the garnet–amphibole peridotites. The observed metasomatic features provide evidence for the infiltration of an aqueous fluid in the mantle wedge above a subducting slab. This fluid most likely derived from subducted crustal rocks that underwent partial melting. Successive retrograde re-equilibration during exhumation of the garnet peridotite is accompanied by garnet and clinopyroxene breakdown and amphibole formation. This process produced minor changes, such as an increase of HREE and Li in amphibole, and an increase of Li in olivine. The general trace element signature remains essentially unchanged during retrogression and further hydration, indicating that fluids with a similar composition to the one present at the garnet–amphibole peridotite formation, were responsible for increased amphibole formation. The combined evidence from the metamorphic and metasomatic evolution indicates that the peridotites experienced first corner flow in a mantle wedge, followed by subduction and finally entrapment and exhumation within a crustal slab. During their entire history the Ulten peridotites were percolated first by melts and then by aqueous fluids, which added recycled crustal components to the mantle wedge.     

Major Rock-Forming Minerals in UHP Metamorphic Rocks

This paper reviews chemical characteristics of common minerals in ultrahigh-pressure (UHP) metamorphic rocks. Garnet in UHP metamorphic rocks belongs to the almandine-pyrope-grossular series and has a wide compositional range in X_alm (up to 0.73), X_prp (0.98), and X_grs (0.92). Garnet with pyroxene exsolution microstructures reported from the Western Gneiss Region, Norway, shows relicts of majoritic garnet formed under P = 6 to 7 GPa. Most clinopyroxenes are Na-Ca groups and their Xjd ranges from 0.0 to 0.89. Members of the clinoenstatite-clinohypersthene (P2₁/c) were reported from peridotites in UHP terranes, and are considered to have been originally the high-pressure polymorph (C2/c) formed under P > 7 to 8 GPa. The presence of sodium in garnet and of potassium in clinopyroxene characterizes UHP equilibrium. Attention is drawn to minerals of the epidote group as strontium and REE containers, to amphibole as a sensor of metamorphic fluid composition, and to phengite as a geobarometer.     

Trace element distribution in Central Dabie eclogites

Coesite-bearing eclogites from Dabieshan (central China) have been studied by ion microprobe to provide information on trace element distributions in meta-basaltic mineral assemblages during high-pressure metamorphism. The primary mineralogy (eclogite facies) appears to have been garnet and omphacite, usually with coesite, phengite and dolomite, together with high-alumina titanite or rutile, or both titanite and rutile; kyanite also occurs occasionally as an apparently primary phase. It is probable that there was some development of quartz, epidote and apatite whilst the rock remained in the eclogite facies. A later amphibolite facies overprint led to partial replacement of some minerals and particularly symplectitic development after omphacite. They vary from very fine-grained dusty-looking to coarser grained Am + Di + Pl symplectites. The eclogite facies minerals show consistent trace element compositions and partition coefficients indicative of mutual equilibrium. Titanite, epidote and apatite all show high concentrations of REE relative to clinopyroxene. The compositions of secondary (amphibolite facies) minerals are clearly controlled by local rather than whole-rock equilibrium, with the composition of amphibole in particular depending on whether it is replacing clinopyroxene or garnet. REE partition coefficients for Cpx/Grt show a dependence on the Ca content of the host phases, with D _REE ^Cpx/Grt decreasing with decreasing D _Ca . This behaviour is very similar to that seen in mantle eclogites, despite differences in estimated temperatures of formation of 650–850 °C (Dabieshan) and 1000–1200 °C (mantle eclogites). With the exception of HREE in garnet, trace elements in the eclogites are strongly distributed in favour of minor or accessory phases. In particular, titanite and rutile strongly concentrate Nb and Zr, whilst LREE–MREE go largely into epidote, titanite and apatite. If these minor/accessory minerals behave in a refractory manner during melting or fluid mobilisation events and do not contribute to the melt/fluid, then the resultant melts and fluids will be strongly depleted in LREE–MREE. Received: 11 February 1999 / Accepted: 31 January 2000     

Petrogenesis of the amphibole-rich veins from the Lherz orogenic lherzolite massif (Eastern Pyrenees, France): a case study for the origin of orthopyroxene-bearing amphibole pyroxenites in the lithospheric mantle

The Lherz orogenic lherzolite massif (Eastern French Pyrenees) displays one of the best exposures of subcontinental lithospheric mantle containing veins of amphibole pyroxenites and hornblendites. A reappraisal of the petrogenesis of these rocks has been attempted from a comprehensive study of their mutual structural relationships, their petrography and their mineral compositions. Amphibole pyroxenites comprise clinopyroxene, orthopyroxene and spinel as early cumulus phases, with garnet and late-magmatic K₂O-poor pargasite replacing clinopyroxene, and subsolidus exsolution products (olivine, spinel II, garnet II, plagioclase). The original magmatic mineralogy and rock compositions were partly obscured by late-intrusive hornblendites and over a few centimetres by vein–wallrock exchange reactions which continued down to subsolidus temperatures for Mg–Fe. Thermobarometric data and liquidus parageneses indicate that amphibole pyroxenites started to crystallize at P ≥ 13 kbar and recrystallized at P < 12 kbar. The high Al^VI/Al^IV ratio (>1) of clinopyroxenes, the early precipitation of orthopyroxene and the late-magmatic amphibole are arguments for parental melts richer in silica but poorer in water than alkali basalts. Their modelled major element compositions are similar to transitional alkali basalt with about 1–3 wt% H₂O. In contrast to amphibole pyroxenites, hornblendites only show kaersutite as liquidus phase, and phlogopite as intercumulus phase. They are interpreted as crystalline segregates from primary basanitic magmas (mg=0.6; 4–6 wt% H₂O). These latter cannot be related to the parental liquids of amphibole pyroxenites by a fractional crystallization process. Rather, basanitic liquids mostly reused pre-existing pyroxenite vein conduits at a higher structural level (P ≤ 10 kbar). A continuous process of redox melting and/or alkali melt/peridotite interaction in a veined lithospheric mantle is proposed to account for the origin of the Lherz hydrous veins. The transitional basalt composition is interpreted in terms of extensive dissolution of olivine and orthopyroxene from wallrock peridotite by alkaline melts produced at the mechanical boundary layer/thermal boundary layer transition (about 45–50 km deep). Continuous fluid ingress allowed remelting of the deeper veined mantle to produce the basanitic, strongly volatiles enriched, melts that precipitated hornblendites. A similar model could be valid for the few orthopyroxene-rich hydrous pyroxenites described in basalt-hosted mantle xenoliths. Received: 15 September 1999 / Accepted: 31 January 2000     

Metasomatism of sub-arc mantle peridotites below southernmost South America: reduction of<Emphasis Type="Italic"> f</Emphasis>O<Subscript>2</Subscript> by slab-melt

Quaternary basalts in the Cerro del Fraile area contain two types of mantle xenoliths; coarse-grained (2–5 mm) C-type spinel harzburgites and lherzolites, and fine-grained (0.5–2 mm) intensely metasomatized F-type spinel lherzolites. C-type xenoliths have high Mg in olivine (Fo = 90–91) and a range in Cr# [Cr/ (Cr + Al) = 0.17–0.34] in spinel. Two C-type samples contain websterite veinlets and solidified patches of melt that is now composed of minute quenched grains of plagioclase + Cr-spinel + clinopyroxene + olivine. These patches of quenched melts are formed by decompression melting of pargasitic amphibole. High Ti contents and common occurrence of relic Cr-spinel in the quenched melts indicate that the amphibole is formed from spinel by interaction with the Ti-rich parental magma of the websterite veinlets. The fO₂ values of these two C-type xenoliths range from ΔFMQ −0.2 to −0.4, which is consistent with their metasomatism by an asthenospheric mantle-derived melt. The rest of the C-type samples are free of “melt,” but show cryptic metasomatism by slab-derived aqueous fluids, which produced high concentrations of fluid-mobile elements in clinopyroxenes, and higher fO₂ ranging from ΔFMQ +0.1 to +0.3. F-type lherzolites are intensely metasomatized to form spinel with low Cr# (∼0.13) and silicate minerals with low MgO, olivine (Fo = ∼84), orthpyroxene [Mg# = Mg/(Mg + ΣFe) = ∼0.86] and clinopyroxene (Mg# = ∼0.88). Patches of “melt” are common in all F-type samples and their compositions are similar to pargasitic amphibole with low TiO₂ (<0.56 wt%), Cr₂O₃ (<0.55 wt%) and MgO (<16.3 wt%). Low Mg# values of silicate minerals, including the amphibole, suggest that the metasomatic agent is most likely a slab melt. This is supported by high ratios of Sr/Y and light rare earth elements (REE)/heavy REE in clinopyroxenes. F-type xenoliths show relatively low fO₂ (ΔFMQ −0.9 to −1.1) compared to C-type xenoliths and this is explained by the fusion of organic-rich sediments overlying the slab during the slab melt. Trench-fill sediments in the area are high in organic matter. The fusion of such wet sediments likely produced CH₄-rich fluids and reduced melts that mixed with the slab melt. High U and Th in bulk rocks and clinopyroxene in F-type xenoliths support the proposed interpretation.     

Composition and processes of the mantle lithosphere in northeastern Brazil and Fernando de Noronha: evidence from mantle xenoliths

Spinel–peridotite facies mantle xenoliths in Cenozoic alkali basalts of the Pico Cabuji volcano (Rio Grande do Norte State, Northeast Brazil) and the adjacent South Atlantic oceanic island of Fernando de Noronha are studied for: (1) the information they provide on the composition of the lithospheric component in the erupted basalt geochemistry, and (2) to check the effects of the Fernando de Noronha plume track on the mantle lithosphere. Xenoliths from Pico Cabuji are protogranular lherzolites and porphyroclastic harzburgites recording average equilibrium temperatures of 825 ± 116 and 1248 ± 19 °C, respectively. Pressure in the porphyroclastic xenoliths ranges from 1.9 to 2.7 GPa (Ca-in-olivine geobarometer). Both groups show major element chemical variation trends in whole-rock and Ti and HREE (Er, Yb) variations in clinopyroxene consistent with fractional melting and basalt extraction. REE (rare earth element) profiles of clinopyroxenes vary from LREE (La, Ce) enriched (spoon shaped) to LREE depleted in the protogranular group, whereas they are slightly convex upward in most porphyroclastic clinopyroxenes. HFSE (Ti and Zr) negative anomalies are in general modest in the clinopyroxenes of both groups. Xenoliths from Fernando de Noronha have textural variations similar to those of Pico Cabuji. Protogranular and porphyroclastic samples have similar temperature (1035 ± 80 °C) and the pressure is 1–1.9 and 2.3 GPa, respectively. Whole-rock chemical variation trends overlap and extend further than those of Pico Cabuji. The trace element profiles of the clinopyroxenes of the porphyroclastic xenoliths are enriched in La up to 30 × PM and are smoothly fractionated from LREE to HREE, with deep, negative, Zr and Ti anomalies. The geochemical heterogeneities of the xenoliths from both localities are interpreted in terms of reactive porous percolation. The porphyroclastic xenoliths from Pico Cabuji represent the lower part of a mantle column (the head of a mantle diapir, at the transition conductive–adiabatic mantle), where OIB infiltration triggers melting, and the protogranular xenoliths the top of the mantle column, chromatographically enriched by percolation at a low melt/rock ratio. This interpretation may also apply for Fernando de Noronha, but the different geochemical signature recorded by the clinopyroxenes requires a different composition of the infiltrated melt. Nd and Sr isotopes of the Pico Cabuji porphyroclastic clinopyroxenes (¹⁴³Nd/¹⁴⁴Nd= 0.51339–0.51255, ⁸⁷Sr/⁸⁶Sr=0.70275–0.70319) and of Fernando de Noronha (¹⁴³Nd/¹⁴⁴Nd=0.51323–0.51285, ⁸⁷Sr/⁸⁶Sr=0.70323–0.70465) plot on distinct arrays originating from a similar, isotopically depleted composition and trending to low Nd–low Sr (EMI) and low Nd–high Sr (EMII), respectively. Correlation of the isotope variation with geochemical parameters indicates that the isotopic variation was induced by the metasomatic component, of EMI type at Pico Cabuji and of EMII type at Fernando de Noronha. These different components enriched a lithosphere isotopically similar to DMM (depleted MORB mantle) at both localities. At Fernando de Noronha, the isotopic signature of the metasomatic component is similar to that of the ∼ 8 Ma old lavas of the Remedios Formation, suggesting that this is the age of metasomatism. At Pico Cabuji, the mantle xenoliths do not record the high ⁸⁷Sr/⁸⁶Sr component present in the basalts. We speculate that the EMII component derives from a lithospheric reservoir, which was not thermally affected during mantle metasomatism at Pico Cabuji, but was mobilized by the hotspot thermal influence at Fernando de Noronha. This interpretation provides a plausible explanation for the presence of distinct metasomatic components at the two localities, which would be difficult to reconcile with their genetic relationship with the same plume. Received: 12 June 1999 / Accepted: 13 December 1999     

澜沧江杂岩带小黑江-上允地区蓝片岩的成因及变质演化

通过对澜沧江杂岩带小黑江-上允地区蓝片岩的岩相学、地球化学、成因矿物学以及相平衡模拟的综合研究,阐述蓝片岩的原岩以及变质演化过程。地球化学分析结果显示,蓝片岩具有一致的稀土元素配分模式,具弱Eu正或负异常,稀土元素和微量元素特征与OIB相似,其原岩可能为OIB型玄武岩。详细矿物学研究表明,本区蓝片岩记录了俯冲峰期蓝片岩相变质和峰期后绿片岩相变质两个变质阶段,其矿物组合分别为蓝闪石+钠长石+多硅白云母+绿泥石+绿帘石和蓝闪石+钠长石±阳起石+绿泥石+绿帘石。通过Na_2O-Ca O-Fe O-MgO-Al_2O_3-SiO_2-H_2O-O体系相平衡计算,得到两个阶段的压力范围分别约为0.95 GPa和0.40 GPa。     

Retention of Sm–Nd isotopic ages in garnets subjected to high-grade thermal reworking: implications for diffusion rates of major and rare earth elements and the Sm–Nd closure temperature in garnet

Garnet is a vital mineral for determining constrained P–T–t paths as it can give both the P–T and t information directly. However, estimates of the closure temperature of the Sm–Nd system in garnet vary considerably leading to significant uncertainties in the timing of peak conditions. In this study, five igneous garnets from an early Proterozoic 2414 ± 6 Ma garnet—cordierite bearing s-type granite—which was subjected to high-T reworking have been dated to examine their diffusional behaviour in the Sm–Nd system. Garnets 8, 7, 6 and 2.5 mm in diameter were compositionally profiled and then dated, producing two-point Sm–Nd isochron ages of 2412 ± 10, 2377 ± 5, 2370 ± 5 and 2365 ± 8 and 2313 ± 11 Ma, respectively. A direct correlation exists between grain size and amount of resetting highlighting the effect of grain size on closure temperature. Major element EMPA and LA-ICPMS REE traverses reveal homogenous major element profiles and relict igneous REE profiles. The retention of REE zoning and homogenisation of major element zoning suggest that diffusion rates of REEs are considerably slower than that of the major cations. The retention of REE zoning and the lack of resetting in the largest grains suggest that Sm–Nd closure temperature in garnet is a function of grain size, thermal history and REE zoning in garnet.     

Mineral chemistry and petrogenesis of granular ejecta from the Alban Hills volcano (Central Italy)

Summary A suite of lithics (ejecta) collected from the latest erupted pyroclastic products of the Alban Hills volcano (Central Italy) has been studied to determine their mineralogical composition and to investigate their genesis. The ejecta commonly have granular texture and consist of coarse-grained crystals often associated with a fine- to medium-grained matrix. The mineralogical composition is variable and consists of both typical igneous minerals and contact metamorphic phases. Garnet, clinopyroxene K-feldspar are almost ubiquitous, whereas leucite, wollastonite, sodalite-group minerals, phlogopite, nepheline and phillipsite are present in most of the ejecta; minor and accessory phases include cuspidine, amphibole, pyrrhotite, magnetite, apatite, uranpyrochlore, sphene, kalsilite, and melilite; anorthite, zircon and fluorine-bearing Ca, Zr silicate phases, larnite, and baryte are found sporadically. Ca, REE, Th silicophosphates occur in many samples generally disseminated along interstices and fractures of main minerals. Calcite is present as discrete crystals sometimes enclosed in other minerals, as granules in the fine-grained matrix and as late microcrystalline veins. It shows high oxygen and low carbon isotope ratios with δ¹⁸O = + 17.96 to + 27.19, and δ¹³C = −4.74 to −19.57. Clinopyroxene ranges from diopside to compositions strongly enriched with both Ca-Tschermak’s and esseneite components. Feldspars are generally potassic even though Ba and Sr are found in significant concentrations in some samples. K-feldspars from wollastonite-bearing ejecta are often rimmed with elongated felty crystals identified by X-ray diffraction analysis as leucite. These feldspars show a depletion in Si, and enrichment in Al and K from core to rim. Significant compositional variations are also shown by various other phases such as nepheline, apatite, Ca, REE, Th silicophosphate. The occurrence of igneous and contact metamorphic minerals, as well as the chemical variations of clinopyroxenes and feldspars in the investigated ejecta reveal complex genetic processes related to the interaction between potassic magma and wall rocks. The Ca-rich composition of most phases points to a carbonate nature for the wall rocks. Textural evidence suggests that coarse-grained rocks formed at the margin of the magma chamber were invaded by a late, volatile rich potassic liquid which crystallized as a fine-grained matrix and produced disaggregation and reaction of early formed minerals. Fluid phases percolating through the rocks generated infiltration metasomatism and deposited some uncommon phases rich in Ca, REE, Th, U, which are found along cracks and at the margins of early crystallized minerals. Overall, the all spectrum of the minerals found in this study are also typical of carbonatitic rocks. Their presence in the Alban Hills ejecta demonstrates that their genesis can be related to interaction between ultrapotassic melts and carbonate wall rocks, in addition to precipitation from carbonatitic melts. Received February 20, 2001; revised version accepted September 23, 2001     

Petrology of ultramafic lamprophyres from the Beaver Lake area of Eastern Antarctica and their relation to the breakup of Gondwanaland

Summary Mesozoic melilite-bearing ultramafic lamprophyres are developed as sill, dyke and plug-like intrusive bodies in the East Antarctic Beaver Lake area. They consist of varying amounts of olivine, melilite, phlogopite, nepheline, titanomagnetite and perovskite as major phases, accompanied by minor amounts of apatite, carbonate, spinel, glass and, rarely, monticellite. The rocks are mineralogically and geochemically broadly similar to olivine melilitites, differing in higher CO₂ and modal phlogopite and carbonate contents. The ultramafic lamprophyres are MgO-rich (13.4–20.5 wt%) and SiO₂-poor (32.8–37.2 wt%), indicative of a near-primary nature. Major and trace element features are consistent with minor fractionation of olivine and Cr-spinel from melts originating at depths of 130–140 km. Primary melts originated by melting of upper mantle peridotite which had been veined by phlogopite + carbonate + clinopyroxene-bearing assemblages less than 200 Ma before eruption. The presence of the veins and their time of formation is required to explain high incompatible trace element contents and growth of ⁸⁷Sr/⁸⁶Sr, leaving ¹⁴³Nd/¹⁴⁴Nd unaffected. The major element, compatible trace element, and most radiogenic isotope characteristics are derived from melting of the wall-rock peridotite. The depth of about 130 km is indicated by the presence of phlogopite rather than amphibole in the veins, by control of the REE pattern by residual garnet, by the high MgO content of the rocks, and by the expected intersection of the rift-flank geotherm with the solidus at this depth. The higher CO₂ contents than are characteristic for olivine melilitites favoured the crystallization of melilite at crustal pressures, and suppressed the crystallization of clinopyroxene. The Beaver Lake ultramafic lamprophyres are a distal effect of the breakup of Gondwanaland, too distal to show a geochemical signature of the Kerguelen plume. Upward and outward movement of the asthenosphere-lithosphere boundary beneath the Lambert-Amery rift led first to the production of phlogopite- and carbonate-rich veins, and later to the generation of the ultramafic lamprophyres themselves. Received March 31, 2000; revised version accepted September 3, 2001