含弱渗透性覆盖层饱和砂土地震液化特性研究

针对含弱渗透性覆盖层的饱和砂土地基进行一组离心机振动台试验,并采用OpenSees对试验模型进行数值模拟。通过模型试验与数值模拟结果对比讨论OpenSees对于饱和砂土地基地震液化模拟的精度;采用水平方向的Arias强度表示传入某一位置的地震动强度,并以液化时水平方向Arias强度作为该土层的抗液化强度;采用OpenSees计算不同地震动输入时饱和砂土的反应,以此检验Arias强度作为抗液化强度的准确性。结果表明,引起饱和砂土液化所需要的地震动强度随深度增加而增加;当传入的地震强度达到砂土发生液化所需要的地震强度时,该层砂土将会发生液化。     

包裹碎石桩加固的砂土液化机理试验研究

通过分别开展包裹碎石桩加固、碎石桩加固以及未加固的饱和砂土液化振动台试验,对比分析不同加固类型下的抗液化性能,重点剖析包裹碎石桩加固的砂土液化机理。试验表明:振动加载过程中,包裹碎石桩始终保持桩体的完整性与良好的排水性能且其加固模型地基的总沉降量相较于未加固模型地基减少了50%,相较于碎石桩加固模型地基减少了31.8%。包裹碎石桩加固模型排出水量较未加固模型地基提高了33.3%,较碎石桩加固模型地基提高了16.6%;包裹碎石桩加固模型地基的超静孔压值下降显著且地基下层砂土出现未液化的现象;并进一步发现包裹碎石桩的排水加固作用沿土层竖向深度呈递增趋势。因此,可以发现包裹碎石桩加固砂土液化的抗震性能优于碎石桩。     

碎石桩加固饱和粉土地基的抗液化特性

除饱和砂土液化外,饱和粉土地震液化问题也是岩土地震工程中一个重要的研究课题。饱和粉土地基的地震液化及变形可以采用多种地基加固方法防治,碎石桩技术是常用方法之一。碎石桩复合地基的抗液化效应,主要是增加桩周土体的密度、利于桩体的排水以及由桩体分担地震水平剪应力（桩体减震作用）。但由于粉土的土质特性,粉土-碎石桩复合地基的抗液化特性与砂土有着明显的差异。本文结合目前国内外碎石桩复合地基抗液化研究的最新进展,对粉土-碎石桩的密实、排水减压和减震作用做了较详细的评述,最后提出了关于碎石柱复合地基抗液化特性需要进一步研究的问题。     

基于Finn本构模型的饱和砂土地震液化分析

天然地震作用下的饱和砂土液化问题是岩土地震工程研究的重要课题之一。目前,国内推荐使用的规范法是基于实际地震液化调查而建立的判别方法,方法本身缺乏理论基础。采用Finn液化本构关系建立了砂土液化数值分析模型,运用有限差分法的动力时程分析模块,分析了饱和砂土地基的地震液化问题。结果表明,将Finn本构模型应用于砂土液化分析,可以较好地给出地震作用过程中孔隙水压力和有效应力变化的规律。     

考虑非线性的建筑物地基地震液化简化分析方法

本文在建筑物地基地震液化总应力简化判别方法的基础上，考虑地基土壤的剪切非线性及饱和砂土Martin非线性孔压增长模型，提出了估计建筑物地基孔压增长的简化分析方法，这一方法可用来判别地基的初始液化问题。     

饱和砂土中箱型隧道的地震反应分析

饱和砂土地基在地震作用下存在液化的潜在危险,液化引起的地基失效可能会导致地下结构的严重震害。以Opensees作为计算平台,对饱和砂土中带中柱箱型隧道的地震反应进行输入不同幅值地震动时的动力数值计算,研究场地和结构的加速度反应及其频谱特性、场地的永久变形、隧道的震后位移以及隧道的内力分布。计算结果表明,饱和砂土中箱型隧道的地震附加内力仍受周围土体的相对位移控制,此外在震后隧道可能会产生侧移和上浮的永久位移,并且可能存在残余内力。     

饱和砂土液化研究进展

根据国内外文献资料,从三方面总结了饱和砂土的最新进展:饱和砂土液化判别方法、砂土液化的试验研究以及液化后分析,特别是探讨了液化对上部结构的影响。最后指出了存在的问题和今后的研究方向。     

含微生物气泡高饱和砂土循环三轴剪切CFD-DEM模拟

为探究砂土液化的微观机理,根据室内试验中微生物反硝化反应气泡的生成速率,建立数值模拟的时效性关系,分别制取微生物处理0天、2天、3天和5天的高饱和砂土试样,采用CFD-DEM耦合方法模拟不同工况下砂土试样的循环三轴不排水剪切试验。依据砂土试样的力链分布、抗液化振次、孔压比、轴向应变和力学配位数在加载过程中的变化情况,从宏微观角度分析砂土试样的抗液化能力。模拟结果表明:含微生物气泡高饱和砂土的抗液化强度较饱和砂土有所提升;随着微生物处理时间的增加,砂土试样的饱和度降低,孔压比和轴向应变的累积变慢,抗液化能力增强。     

饱和砂土地铁车站的振动台试验研究

地震作用下,饱和砂土地层地铁车站的动力反应特征是城市轨道工程抗震的关键问题。以太原地铁新近沉积粉细砂地层地铁工程为对象,通过模拟地震运动输入的饱和砂土地基地下结构的振动台模型试验,分析了不同峰值加速度地震作用下饱和砂土与地下结构相互作用的动力反应性状。研究了地震波作用的放大效应与频率特征,动孔压比增长发展过程和液化区域分布,以及动土压力的变化规律。表明加速度放大系数为1.5~2.0;0.1~0.25g峰值加速度地震作用下饱和砂土均产生动孔隙水压力累计发展;0.3g峰值加速度地震作用下饱和砂土产生液化,抑制了土与地下结构的振动放大效应,地表面大量冒水,结构模型出现了明显上浮,地下结构两侧产生震陷。     

砂土液化判别方法研究若干进展

由于砂土液化是导致地基失效和上部结构受损的重要原因之一,场地液化判别是饱和砂土场地工程建设中的必要环节,因此砂土液化判别方法研究是工程抗震设计中的一个重要课题。回顾了砂土液化判别方法的研究历史,总结了国内外进行液化判别的主要方法和研究进展,对各判别方法进行了简要述评。在分析当前研究成果的基础上,指出了已有液化判别方法中存在的一些问题,并针对这些问题进行了讨论,包括液化评价指标的获取、标准贯入锤击数基准值的可靠性、液化判别的概率表达和液化判别方法的适用性等。这一工作为从事该领域的研究工作以及今后的研究方向提供了一定参考。     

Propagation of seismic waves through liquefied soils

To predict the earthquake response of saturated porous media it is essential to correctly simulate the generation, redistribution, and dissipation of excess pore water pressure during and after earthquake shaking. To this end, a reliable numerical tool requires a dynamic, fully coupled formulation for solid–fluid interaction and a versatile constitutive model. Presented in this paper is a 3D finite element framework that has been developed and utilized for this purpose. The framework employs fully coupled dynamic field equations with a u–p–U formulation for simulation of pore fluid and solid skeleton interaction and a SANISAND constitutive model for response of solid skeleton. After a detailed verification and validation of the formulation and implementation of the developed numerical tool, it is employed in the seismic response of saturated porous media. The study includes examination of the mechanism of propagation of the earthquake-induced shear waves and liquefaction phenomenon in uniform and layered profiles of saturated sand deposits.     

Study of pore pressure variation during liquefaction using two constitutive models for sand

Numerical analyses of liquefiable sand are presented in this paper. Liquefaction phenomenon is an undrained response of saturated sandy soils when they are subjected to static or dynamic loads. A fully coupled dynamic computer code is developed to predict the liquefaction potential of a saturated sandy layer. Coupled dynamic field equations of extended Biot's theory with u–P formulation are used to determine the responses of pore fluid and soil skeleton. Generalized Newmark method is employed for integration in time. The soil behavior is modelled by two constitutive models; a critical state two-surface plasticity model, and a densification model. A class ‘B’ analysis of a centrifuge experiment is performed to simulate the dynamic response of level ground sites. The results of the numerical analyses demonstrate the capability of the critical sate two-surface plasticity model in producing pore pressures that are consistent with observations of the behavior of liquefiable sand in the centrifuge test.     

A micro-mechanical investigation of the dynamic response and liquefaction of saturated granular soils

A coupled continuum-discrete hydromechanical model was utilized to analyze the meso-scale pore fluid flow and micro-scale solid phase deformation of saturated granular soils. The fluid motion was idealized using averaged Navier–Stokes equations and the discrete element method was employed to model the solid particles. Well established semi-empirical relationships were used to quantify the fluid–particle interactions. Numerical simulations were conducted to investigate the mechanisms of granular deposit liquefaction in the presence of a critical upward pore fluid flow as well as when subjected to a dynamic base excitation. The outcome of these simulations was consistent with experimental observations and revealed valuable information on the micro-mechanical characteristics of soil liquefaction and associated loss of stiffness and strength.     

A practical numerical method for large strain liquefaction analysis of saturated soils

Accurate prediction of the liquefaction of saturated soils is based on strong coupling between the pore fluid phase and soil skeleton. A practical numerical method for large strain dynamic analysis of saturated soils is presented. The u–p formulation is used for the governing equations that describe the coupled problem in terms of soil skeleton displacement and excess pore pressure. A mixed finite element and finite difference scheme related to large strain analysis of saturated soils based on the updated Lagrangian method is given. The equilibrium equation of fluid-saturated soils is spatially discretized by the finite element method, whereas terms associated with excess pore pressure in the continuity equation are spatially discretized by the finite difference method. An effective cyclic elasto-plastic constitutive model is adopted to simulate the non-linear behavior of saturated soils under dynamic loading. Several numerical examples that include a saturated soil column and caisson-type quay wall are presented to verify the accuracy of the method and its usefulness and applicability to solutions of large strain liquefaction analysis of saturated soils in practical problems.     

遮帘式板桩码头地基地震液化破坏机理

遮帘式板桩码头作为一种新型的板桩结构型式,其抗震性能研究是设计建造过程中的重要环节。在FEM-FDM水土耦合计算的平台上引入循环弹塑性本构模型,借助FORTRAN编程软件形成饱和砂土动力液化分析的数值方法,可有效模拟饱和砂土在地震动力作用下的非线性及大变形特性,同时也可模拟砂土液化流动对遮帘桩和前墙的动土压力。研究表明:地震作用下可液化土层超孔隙水压力比增长并发生较大的水平流动变形,对前墙的水平破坏大于竖向破坏;前墙剪力最大值位于海床与前墙交界处;遮帘桩剪力最大值位移与前墙底平行的位置;后拉杆拉力逐渐变大,前拉杆拉力逐渐变小。通过对板桩码头地震液化灾害的分析,可为抗震和抗液化设计提供参考依据。     

Rayleigh波对浅地表地基震害的影响

基于场地砂土液化的宏观现场证据和简要分析,指出Rayleigh波对距震中中远距离的浅层饱和土层的砂土液化有着很大的影响。通过单相和双相介质模型分析,阐述了Rayleigh波在土中传播的特性以及对土壤液化的影响,指出在浅源地震中Rayleigh波将是中远场地区土壤液化的主要动力影响因素,提出了一些在分析土壤液化时应考虑的新因素和方法。最后提出了在考虑Rayleigh波对土壤液化评判和小区划时应注意的一些问题。     

基于OpenSees的砂土本构模型对比研究

饱和砂土液化是由地震引起的一种最常见的工程地质现象,也是造成重大地震灾害的主要原因之一。由于成因的复杂性和所造成灾害的严重性,饱和砂土液化一直是土动力学和岩土地震工程研究领域的重要课题。针对饱和砂土液化问题,基于开源地震工程数值计算平台OpenSees,对材料库中的4种砂土本构模型进行数值计算。采用二维u-p单元模拟土颗粒位移和孔隙水压力,分析和对比4种模型在循环动力荷载作用下的加速度、超孔隙水压力、位移、剪应力-剪应变和平均有效应力路径方面的响应结果。研究结果表明:(1)砂土对输入加速度表现出一定的放大效应,对于不同的模型,该放大效应存在一些差异;(2) Stress Density模型在循环动力荷载作用下易产生永久变形;(3)在循环动力荷载作用下,PDMY模型和CycLiqCPSP模型的强度逐渐降低,直到完全消失;(4) Stress Density模型和Manzari Dafalias模型在循环动力荷载下表现出明显的剪胀效应。研究成果对砂土液化的数值模拟问题具有重要的理论价值,可为饱和砂土的液化模拟和砂土本构模型的选取提供参考。     

Uplift mechanism for a shallow-buried structure in liquefiable sand subjected to seismic load: centrifuge model test and DEM modeling

Based on a centrifuge model test and distinct element method(DEM), this study provides new insights into the uplift response of a shallow-buried structure and the liquefaction mechanism for saturated sand around the structure under seismic action. In the centrifuge test, a high-speed microscopic camera was installed in the structure model, by which the movements of particles around the structure were monitored. Then, a two-dimensional digital image processing technology was used to analyze the microstructure of saturated sand during the shaking event. Herein, a numerical simulation of the centrifuge experiment was conducted using a two-phase(solid and fl uid) fully coupled distinct element code. This code incorporates a particle-fl uid coupling model by means of a "fi xed coarse-grid" fl uid scheme in PFC3D(Particle Flow Code in Three Dimensions), with the modeling parameters partially calibrated based on earlier studies. The physical and numerical models both indicate the uplifts of the shallow-buried structure and the sharp rise in excess pore pressure. The corresponding micro-scale responses and explanations are provided. Overall, the uplift response of an underground structure and the occurrence of liquefaction in saturated sand are predicted successfully by DEM modeling. However, the dynamic responses during the shaking cannot be modeled accurately due to the restricted computer power.     

The dynamic response of fluid-saturated porous materials with application to seismically induced soil liquefaction

The numerical simulation of liquefaction phenomena in fluid-saturated porous materials within a continuum-mechanical framework is the aim of this contribution. This is achieved by exploiting the Theory of Porous Media (TPM) together with thermodynamically consistent elasto-viscoplastic constitutive laws. Additionally, the Finite Element Method (FEM) besides monolithic time-stepping schemes is used for the numerical treatment of the arising coupled multi-field problem. Within an isothermal and geometrically linear framework, the focus is on fully saturated biphasic materials with incompressible and immiscible phases. Thus, one is concerned with the class of volumetrically coupled problems involving a potentially strong coupling of the solid and fluid momentum balance equations and the algebraic incompressibility constraint. Applying the suggested material model, two important liquefaction-related incidents in porous media dynamics, namely the flow liquefaction and the cyclic mobility, are addressed, and a seismic soil–structure interaction problem to reveal the aforementioned two behaviors in saturated soils is introduced.     

地基液化导致沉箱码头破坏及地基加固方法的非线性数值分析

地震作用引发的地基液化,往往导致沉箱基础的破坏。本文基于Biot两相饱和多孔介质动力耦合理论,采用FE-FD耦合数值分析方法,对液化海床沉箱基础的地震反应进行非线性有效应力分析。在数值分析过程中,建立了以土骨架位移和超静孔隙水压力表达的us-pw动力固结方程和循环弹塑性本构模型,该方法能够很好地模拟地震作用下沉箱码头的动力特性及液化破坏的影响。通过数值模拟计算,分析了采用碎石桩进行置换砂区域的防液化加固方法,并就碎石桩处理区域的选择提出了建议。