Meltwater discharge through the subglacial bed and its land‐forming consequences from numerical experiments in the Polish lowland during the last glaciation

Numerical experiments suggest that the last glaciation severely affected the upper lithosphere groundwater system in NW Poland: primarily its flow pattern, velocities and fluxes. We have simulated subglacial groundwater flow in two and three spatial dimensions using finite difference codes for steady‐state and transient conditions. The results show how profoundly the ice sheet modifies groundwater pressure heads beneath and some distance beyond the ice margin. All model runs show water discharge at the ice forefield driven by ice‐sheet‐thickness‐modulated, down‐ice‐decreasing hydraulic heads. In relation to non‐glacial times, the transient 3D model shows significant changes in the groundwater flow directions in a regionally extensive aquifer ca. 90 m below the ice–bed interface and up to 40 km in front of the glacier. Comparison with empirical data suggests that, depending on the model run, only between 5 and 24% of the meltwater formed at the ice sole drained through the bed as groundwater. This is consistent with field observations documenting abundant occurrence of tunnel valleys, indicating that the remaining portion of basal meltwater was evacuated through a channelized subglacial drainage system. Groundwater flow simulation suggests that in areas of very low hydraulic conductivity and adverse subglacial slopes water ponding at the ice sole was likely. In these areas the relief shows distinct palaeo‐ice lobes, indicating fast ice flow, possibly triggered by the undrained water at the ice–bed interface. Owing to the abundance of low‐permeability strata in the bed, the simulated groundwater flow depth is less than ca. 200 m. Copyright © 2009 John Wiley & Sons, Ltd.     

The hydrochemistry of meltwaters draining a polythermal-based,high Arctic glacier,south Svalbard: I. The ablation season

Solute and runoff time-series at Finsterwalderbreen, Svalbard, provide evidence for considerable basal routing of water and the existence of at least two contrasting subglacial chemical weathering environments. The hydrochemistry of a subglacial upwelling provides evidence for a snowmelt-fed subglacial reservoir that dominates bulk runoff during recession flow. High concentrations of Cl⁻ and crustal ions, high pCO₂ and ratios of [*SO²⁻₄/(*SO²⁻₄+HCO⁻₃)] close to 0·5 indicate the passage of snowmelt through a subglacial weathering environment characterized by high rock:water ratios, prolonged residence times and restricted access to the atmosphere. At higher discharges, bulk runoff becomes dominated by icemelt from the lower part of the glacier that is conveyed through a chemical weathering environment characterized by low rock:water ratios, short residence times and free contact with atmospheric gases. These observations suggest that icemelt is routed via a hydrological system composed of basal/ice-marginal, englacial and supraglacial components and is directed to the glacier margins by the ice surface slope. Upwelling water flows relatively independently of icemelt to the terminus via a subglacial drainage system, possibly constituting flow through a sediment layer. Cold basal ice at the terminus forces it to take a subterranean routing in its latter stages. The existence of spatially discrete flow paths conveying icemelt and subglacial snowmelt to the terminus may be the norm for polythermal-based glaciers on Svalbard. Proglacial mixing of these components to form the bulk meltwaters gives rise to hydrochemical trends that resemble those of warm-based glaciers. These hydrochemical characteristics of bulk runoff have not been documented on any other glacier on Svalbard to date and have significance for understanding interactions between thermal regime and glacier hydrology. © 1998 John Wiley & Sons, Ltd.     

Evidence for seasonal subglacial outburst events at a polythermal glacier,Finsterwalderbreen, Svalbard

Bulk runoff and meteorological data suggest the occurrence of two meltwater outburst events at Finsterwalderbreen, Svalbard, during the 1995 and 1999 melt seasons. Increased bulk meltwater concentrations of Cl^? during the outbursts indicate the release of snowmelt from storage. Bulk meltwater hydrochemical data and suspended sediment concentrations suggest that this snowmelt accessed a chemical weathering environment characterized by high rock:water ratios and long rock–water contact times. This is consistent with a subglacial origin. The trigger for both the 1995 and 1999 outbursts is believed to be high rates of surface meltwater production and the oversupply of meltwater to areas of the glacier bed that were at the pressure melting point, but which were unconnected to the main subglacial drainage network. An increase in subglacial water pressure to above the overburden pressure lead to the forcing of a hydrological connection between the expanding subglacial reservoir and the ice‐marginal channelized system. The purging of ice blocks from the glacier during the outbursts may indicate the breach of an ice dam during connection. Although subglacial meltwater issued continually from the glacier terminus via a subglacial upwelling during both melt seasons, field observations showed outburst meltwaters were released solely via an ice‐marginal channel. It is possible that outburst events are a seasonal phenomenon at this glacier and reflect the periodic drainage of meltwaters from the same subglacial reservoir from year to year. However, the location of this reservoir is uncertain. A 100 m high bedrock ridge traverses the glacier 6·5 km from its terminus. The overdeepened area up‐glacier from this is the most probable site for subglacial meltwater accumulation. Copyright © 2001 John Wiley & Sons, Ltd.     

Using UAV acquired photography and structure from motion techniques for studying glacier landforms: application to the glacial flutes at Isfallsglaciären

Glacier and ice sheet retreat exposes freshly deglaciated terrain which often contains small‐scale fragile geomorphological features which could provide insight into subglacial or submarginal processes. Subaerial exposure results in potentially rapid landscape modification or even disappearance of the minor‐relief landforms as wind, weather, water and vegetation impact on the newly exposed surface. Ongoing retreat of many ice masses means there is a growing opportunity to obtain high resolution geospatial data from glacier forelands to aid in the understanding of recent subglacial and submarginal processes. Here we used an unmanned aerial vehicle to capture close‐range aerial photography of the foreland of Isfallsglaciären, a small polythermal glacier situated in Swedish Lapland. An orthophoto and a digital elevation model with ~2 cm horizontal resolution were created from this photography using structure from motion software. These geospatial data was used to create a geomorphological map of the foreland, documenting moraines, fans, channels and flutes. The unprecedented resolution of the data enabled us to derive morphological metrics (length, width and relief) of the smallest flutes, which is not possible with other data products normally used for glacial landform metrics mapping. The map and flute metrics compare well with previous studies, highlighting the potential of this technique for rapidly documenting glacier foreland geomorphology at an unprecedented scale and resolution. The vast majority of flutes were found to have an associated stoss‐side boulder, with the remainder having a likely explanation for boulder absence (burial or erosion). Furthermore, the size of this boulder was found to strongly correlate with the width and relief of the lee‐side flute. This is consistent with the lee‐side cavity infill model of flute formation. Whether this model is applicable to all flutes, or multiple mechanisms are required, awaits further study. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Englacial and subglacial water flow at Skálafellsjökull,Iceland derived from ground penetrating radar,in situ Glacsweb probe and borehole water level measurements

We reconstruct englacial and subglacial drainage at Skálafellsjökull, Iceland, using ground penetrating radar (GPR) common offset surveys, borehole studies and Glacsweb probe data. We find that englacial water is not stored within the glacier (water content ~0–0.3%). Instead, the glacier is mostly impermeable and meltwater is able to pass quickly through the main body of the glacier via crevasses and moulins. Once at the glacier bed, water is stored within a thin (1 m) layer of debris‐rich basal ice (2% water content) and the till. The hydraulic potential mapped across the survey area indicates that when water pressures are high (most of the year), water flows parallel to the margin, and emerges 3 km down glacier at an outlet tongue. GPR data indicates that these flow pathways may have formed a series of braided channels. We show that this glacier has a very low water‐storage capacity, but an efficient englacial drainage network for transferring water to the glacier bed and, therefore, it has the potential to respond rapidly to changes in melt‐water inputs. © 2015 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Subglacial drumlins and englacial fractures at the surge-type glacier,Múlajökull,Iceland

The interaction between drumlins and overriding glacier ice is not well studied, largely due to the difficulty of identifying and accessing suitable active subglacial environments. The surge-type glacier Múlajökull, in central Iceland, overlies a known field of actively forming drumlins and therefore provides a rare opportunity to investigate the englacial structures that have developed in association with ice flow over the subglacial drumlins. In this study detailed ground-penetrating radar surveys are combined with field observations to identify clear sets of up-glacier and down-glacier dipping fractures at Múlajökull's margin. These are interpreted as conjugate shear planes or P- and R-type Reidel shears that developed and filled with saturated sediment derived from the glacier bed, during a previous surge. The fracture sets exhibit focused spatial distributions that are influenced by the subglacial topography. In particular, down-glacier dipping fractures are strongly focused over drumlin stoss slopes. These fractures, although well developed at depth, were mostly unable to transmit basal water and sediment up to the glacier surface during the surge cycle. In contrast, up-glacier dipping fractures formed over drumlin lee sides and in more gently sloping swales, and more frequently connected to the glacier surface, providing a pathway for the evacuation of basal water and water-saturated sediment. The study suggests that the subglacial drumlins under Múlajökull's margin have influenced the nature and distribution of englacial fractures, which could potentially contribute to spatial variations in basal water pressure during a surge. BGS © UKRI 2018     

Structure,morphology and water flux of a subglacial drainage system,Midtdalsbreen, Norway

Digital elevation models of the surface and bed of Midtdalsbreen, Norway are used to calculate subglacial hydraulic potential and infer drainage system structure for a series of subglacial water pressure assumptions ranging from atmospheric to ice overburden. A distributed degree‐day model is used to calculate the spatial distribution of melt on the glacier surface throughout a typical summer, which is accumulated along the various drainage system structures to calculate water fluxes beneath the glacier and exiting the portals for the different water pressure assumptions. In addition, 78 dye‐tracing tests were performed from 33 injection sites and numerous measurements of water discharge were made on the main proglacial streams over several summer melt seasons. Comparison of the calculated drainage system structures and water fluxes with dye tracing results and measured proglacial stream discharges suggests that the temporally and spatially averaged steady‐state water pressures beneath the glacier are ~70% of ice overburden. Analysis of the dye return curves, together with the calculated subglacial water fluxes shows that the main drainage network on the eastern half of the glacier consists of a hydraulically efficient system of broad, low channels (average width/height ratio ≈ 75). The smaller drainage network on the west consists of a hydraulically inefficient distributed system, dominated by channels that are exceptionally broad and very low (average width/height ratio ≈ 350). The even smaller central drainage network also consists of a hydraulically inefficient distributed system, dominated by channels that are very broad and exceptionally low (average width/height ratio ≈ 450). The channels beneath the western and central glacier must be so broad and low that they can essentially be thought of as a linked cavity system. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydrochemistry of meltwaters draining a polythermal‐based,high‐Arctic glacier,south Svalbard: II. Winter and early Spring

The hydrochemistry of naled and upwelling water sampled from the forefields of Finsterwalderbreen, Svalbard, during spring are used for the first time to infer the hydrology of overwinter meltwaters at a polythermal‐based glacier. Hydrochemical variations in naled are explained in terms of different water sources and their chemical alteration during freezing. Two water sources to naled are identified: surficially routed snowmelt and subglacial water. Naled that results from the freezing of the former is enriched in atmospherically derived ions such as Na⁺ and Cl⁻, and is believed to be formed during winter warm periods. Naled of subglacial origin contains relatively high proportions of crustally derived solute. It reflects the freezing of subglacial meltwaters that continue to issue from a subterranean upwellling during winter. An increasing dominance of SO²⁻₄ Mg²⁺, Na⁺ and Cl⁻ in subglacial naled with increasing distance from the upwelling reflects the progressive freezing of this water body and the associated removal of Ca²⁺ and HCO by calcite precipitation. These spatial trends are accentuated by the leaching of soluble ions from the naled close to its source by subsequent upwelling waters. The chemistry of spring upwelling waters, also of subglacial origin, strongly reflects this process. Meltwater produced by geothermal heating of glacier basal ice is believed to be the principal source of water to the subglacial drainage system during winter. Solute acquisition by this meltwater is limited by a scarcity of proton suppliers. Evolution of this dilute meltwater carries an imprint of ion exchange processes. Some stored subglacial water from the end of the previous ablation season may supplement the basal meltwater component in early winter. Copyright © 2000 John Wiley & Sons, Ltd.     

Basal sediment evacuation by subglacial meltwater: suspended sediment transport from Haut Glacier d'Arolla,Switzerland

Proglacial suspended sediment transport was monitored at Haut Glacier d'Arolla, Switzerland, during the 1998 melt season to investigate the mechanisms of basal sediment evacuation by subglacial meltwater. Sub‐seasonal changes in relationships between suspended sediment transport and discharge demonstrate that the structure and hydraulics of the subglacial drainage system critically influenced how basal sediment was accessed and entrained. Under hydraulically inefficient subglacial drainage at the start of the melt season, sediment availability was generally high but sediment transport increased relatively slowly with discharge. Later in the melt season, sediment transport increased more rapidly with discharge as subglacial meltwater became confined to a spatially limited network of channels following removal of the seasonal snowpack from the ablation area. Flow capacity is inferred to have increased more rapidly with discharge within subglacial channels because rapid changes in discharge during highly peaked diurnal runoff cycles are likely to have been accommodated largely by changes in flow velocity. Basal sediment availability declined during channelization but increased throughout the remainder of the monitored period, resulting in very efficient basal sediment evacuation over the peak of the melt season. Increased basal sediment availability during the summer appears to have been linked to high diurnal water pressure variation within subglacial channels inferred from the strong increase in flow velocity with discharge. Basal sediment availability therefore appears likely to have been increased by (1) enhanced local ice‐bed separation leading to extra‐channel flow excursions and[sol ]or (2) the deformation of basal sediment towards low‐pressure channels due to a strong diurnally reversing hydraulic gradient between channels and areas of hydraulically less‐efficient drainage. Copyright © 2005 John Wiley & Sons, Ltd.     

Debris entrainment by basal freeze‐on and thrusting during the 1995–1998 surge of Kuannersuit Glacier on Disko Island,west Greenland

Kuannersuit Glacier, a valley glacier on Disko Island in west Greenland, experienced a major surge from 1995 to 1998 where the glacier advanced 10·5 km and produced a ～65 m thick stacked sequence of debris‐rich basal ice and meteoric glacier ice. The aim of this study is to describe the tectonic evolution of large englacial thrusts and the processes of basal ice formation using a multiproxy approach including structural glaciology, stable isotope composition (δ¹⁸O and δD), sedimentology and ground‐penetrating radar. We argue that the major debris layers that can be traced in the terminal zone represent englacial thrusts that were formed early during the surge. Thrust overthrow was at least 200–300 m and this lead to a 30 m thick repetition of basal ice at the ice margin. It is assumed that the englacial thrusting was initiated at the transition between warm ice from the interior and the cold snout. The basal debris‐rich ice was mainly formed after the thrusting phase. Two sub‐facies of stratified basal ice have been identified; a lower massive ice facies (S_M) composed of frozen diamict enriched with heavy stable isotopes overlain by laminated ice facies (S_L) consisting of millimetre thick lamina of alternating debris‐poor and debris‐rich ice. We interpret the stratified basal ice as a continuum formed mainly by freeze‐on processes and localized regelation. First laminated basal ice is formed and as meltwater is depleted more sediment is entrained and finally the glacier freezes to the base and massive diamict is frozen‐on. The increased ability to entrain sediments may partly be associated with higher basal freezing rates enhanced by loss of frictional heat from cessation of fast flow and conductive cooling through a thin heavily crevassed ice during the final phase of the glacier surge. The dispersed basal ice facies (D) was mainly formed by secondary processes where fine‐grained sediment is mobilized in the vein system of ice. Our results have important implications for understanding the significance of basal ice formation and englacial thrusting beneath fast‐flowing glaciers and it provides new information about the development of landforms during a glacier surge. Copyright © 2010 John Wiley & Sons, Ltd.     

Deglacial hypsometry of Antarctica

A new and more detailed analysis of the hypsometry of the Antarctic continent, based upon 1° digital data on ice thickness and surface and subglacial elevations, shows that Antarctica, even when deglaciated according to a simple Airy-isostatic model, is an unusual continent. It is the only one with a markedly bimodal hypsometric curve, and separation of the two modes shows that they are the single modes of West Antarctica (at ?450 m a.s.1.) and East Antarctica (at 950 m a.s.1.) respectively; the two parts of the continent are probably distinct tectonic entities. The modal height of East Antarctica is 700 m higher than that of the global ensemble of continents, suggesting that hotspot epeirogeny or a less well-known mechanism has affected its recent history. The age of this modal-height anomaly has important tectonic and especially climatic implications: it is equivalent to a 4–6°C cooling of the continental surface. The area of dry land after deglaciation is 10.5 × 10⁶ km²; the volume of ice in Antarctica is estimated at 26.9 × 10⁶ km³, and of ice in the Northern Hemisphere at 2.5 × 10⁶ km³; these figures lead to a eustatic sea-level equivalent for present-day glacier ice of 68 m or somewhat less.     

Diurnal fluctuations in glacier ice deformation: Haut Glacier d'Arolla,Switzerland

Measurements of surface velocity, ice deformation (at 42 and 89% ice depth) and proglacial stream discharge were made at Haut Glacier d'Arolla, Switzerland, to determine diurnal patterns of variation in each. Data are analysed in order to understand better the relationship between hydraulically induced basal motion and glacier ice deformation over short timescales. The data suggest that hydraulically induced localized basal ‘slippery’ spots are created over diurnal cycles, causing enhanced basal motion and spatially variable glacier speed‐up. Our data indicate that daily glacier speed‐up is associated with reduced internal deformation over areas previously identified as slippery spots and increased deformation in areas located adjacent to or down‐glacier from slippery spots. We interpret this pattern in terms of a transfer of mechanical support for basal shear stress away from slippery spots to adjacent sticky areas, where the resulting stronger ice–bed coupling causes increased ice deformation near the bed. These patterns indicate that basal ice is subjected to stress regimes that are variable at a high spatial and temporal resolution. Such variations may be central to the creation of anomalous vertical velocity profiles measured above and down‐glacier of basal slippery zones, which have shown evidence for ‘plug flow’ and extrusion flow over annual timescales. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermodynamics and fluid dynamics of effusive subglacial eruptions

We consider the thermodynamic and fluid dynamic processes that occur during subglacial effusive eruptions. Subglacial eruptions typically generate catastrophic floods (jökulhlaups) due to melting of ice by lava and generation of a large water cavity. We consider the heat transfer from basaltic and rhyolitic lava eruptions to the ice for typical ranges of magma discharge and geometry of subglacial lavas in Iceland. Our analysis shows that the heat flux out of cooling lava is large enough to sustain vigorous natural convection in the surrounding meltwater. In subglacial eruptions the temperature difference driving convection is in the range 10–100??°C. Average temperature of the meltwater must exceed 4??°C and is usually substantially greater. We calculate melting rates of the walls of the ice cavity in the range 1–40?m/day, indicating that large subglacial lakes can form rapidly as observed in the 1918 eruption of Katla and the 1996 eruption of Gjálp fissure in Vatnajökull. The volume changes associated with subglacial eruptions can cause large pressure changes in the developing ice cavity. These pressure changes can be much larger than those associated with variation of bedrock and glacier surface topography. Previous models of water-cavity stability based on hydrostatic and equilibrium conditions may not be applicable to water cavities produced rapidly in volcanic eruptions. Energy released by cooling of basaltic lava at the temperature of 1200??°C results in a volume deficiency due to volume difference between ice and water, provided that heat exchange efficiency is greater than approximately 80%. A negative pressure change inhibits escape of water, allowing large cavities to build up. Rhyolitic eruptions and basaltic eruptions, with less than approximately 80% heat exchange efficiency, cause positive pressure changes promoting continual escape of meltwater. The pressure changes in the water cavity can cause surface deformation of the ice. Laboratory experiments were carried out to investigate the development of a water cavity by melting ice from a finite source area at its base. The results confirm that the water cavity develops by convective heat transfer.     

Heterogeneous water storage and thermal regime of supraglacial ponds on debris‐covered glaciers

The water storage and energy transfer roles of supraglacial ponds are poorly constrained, yet they are thought to be important components of debris‐covered glacier ablation budgets. We used an unmanned surface vessel (USV) to collect sonar depth measurements for 24 ponds to derive the first empirical relationship between their area and volume applicable to the size distribution of ponds commonly encountered on debris‐covered glaciers. Additionally, we instrumented nine ponds with thermistors and three with pressure transducers, characterizing their thermal regime and capturing three pond drainage events. The deepest and most irregularly‐shaped ponds were those associated with ice cliffs, which were connected to the surface or englacial hydrology network (maximum depth = 45.6 m), whereas hydrologically‐isolated ponds without ice cliffs were both more circular and shallower (maximum depth = 9.9 m). The englacial drainage of three ponds had the potential to melt ~100 ± 20 × 10³ kg to ~470 ± 90 × 10³ kg of glacier ice owing to the large volumes of stored water. Our observations of seasonal pond growth and drainage with their associated calculations of stored thermal energy have implications for glacier ice flow, the progressive enlargement and sudden collapse of englacial conduits, and the location of glacier ablation hot‐spots where ponds and ice cliffs interact. Additionally, the evolutionary trajectory of these ponds controls large proglacial lake formation in deglaciating environments. Copyright © 2017 John Wiley & Sons, Ltd.     

Till deposition by glacier submarginal,incremental thickening

Macro‐ and micro‐scale sedimentological analyses of recently deposited tills and complex push/squeeze moraines on the forelands of Icelandic glaciers and in a stacked till sequence at the former Younger Dryas margin of the Loch Lomond glacier lobe in Scotland are used to assess the depositional processes involved in glacier submarginal emplacement of sediment. Where subglacial meltwater is unable to flush out subglacial sediment or construct thick debris‐rich basal ice by cumulative freeze‐on processes, glacier submarginal processes are dictated by seasonal cycles of refreezing and melt‐out of tills advected from up‐ice by a combination of lodgement, deformation and ice keel and clast ploughing. Although individual till layers may display typical A and B horizon deformation characteristics, the spatially and temporally variable mosaic of subglacial processes will overprint sedimentary and structural signatures on till sequences to the extent that they would be almost impossible to classify genetically in the ancient sediment record. At the macro‐scale, Icelandic tills display moderately strong clast fabrics that conform to the ice flow directions documented by surface flutings; very strong fabrics typify unequivocally lodged clasts. Despite previous interpretations of these tills as subglacial deforming layers, micro‐morphological analysis reveals that shearing played only a partial role in the emplacement of till matrixes, and water escape and sediment flowage features are widespread. A model of submarginal incremental thickening is presented as an explanation of these data, involving till slab emplacement over several seasonal cycles. Each cycle involves: (1) late summer subglacial lodgement, bedrock and sediment plucking, subglacial deformation and ice keel ploughing; (2) early winter freeze‐on of subglacial sediment to the thin outer snout; (3) late winter readvance and failure along a decollement plane within the till, resulting in the carriage of till onto the proximal side of the previous year's push moraine; (4) early summer melt‐out of the till slab, initiating porewater migration, water escape and sediment flow and extrusion. Repeated reworking of the thin end of submarginal till wedges produces overprinted strain signatures and clast pavements. Copyright © 2005 John Wiley & Sons, Ltd.     

Geospatial analysis of controls on subglacial bedform morphometry in the New York Drumlin Field – implications for Laurentide Ice Sheet dynamics

The outline and trend of 6566 subglacial bedforms in the New York Drumlin Field have been digitized from digital elevation data. A spatial predictive model has been used to extend values of bedform elongation over an area measuring 200 km × 110 km. The resulting surface is used in conjunction with depth‐to‐bedrock data and an assumed duration of ice residence to test three proposed controls on bedform elongation. Upon comparison, the resulting display of morphometry is best explained by differences in ice velocity across the field of study. The existence of multiple zones of fast‐moving ice located along the southern margin of the Laurentide Ice Sheet is implied by the observed patterns of bedform elongation and orientation. We present two interpretations that are consistent with the observations. First, enhanced basal sliding caused by decreasing effective pressure near a calving margin is suggested as a possible mechanism by which localized fast ice flow is initiated and maintained. Second, topographically controlled ice streams likely occupied the fjord‐like troughs of the Appalachian Upland northern rim. Contrary to previous understanding of the Laurentide southern margin in New York State, the resulting palaeoglaciological reconstruction illustrates a dynamic mosaic of ice stream and/or outlet glacier activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Observations in a cavity beneath grinnell glacier

During a 3-year period, several aspects of the glacier-rock interface were studied in a cavity beneath 5–8 m of ice near the terminus of Grinnell Glacier, Montana, U.S.A. Continuous week-long records of the summer sliding rate revealed a very uniform speed of about 12 m a^?1 during the summer, a value about 20 per cent higher than the average annual sliding rate. Several decimetre-sized rock fragments were broken from the glacier bed near the lee sides of bedrock ledges and transported down-glacier. In the course of a two-week long experiment, the glacier abraded its bed significantly and non-uniformly. It is of interest that significant quarrying and abrasion occurred under thin ice with relatively little entrained debris.     

Sediment entrainment by a soft‐bedded glacier: a model based on regelation into the bed

Experimental results indicate that wet‐based, soft‐bedded glaciers may penetrate their substrates by regelation (melting and refreezing) and thereby entrain sediment. In principle, there should be a steady depth of penetration at which the downward regelation speed, driven by the interfacial effective pressure, equals the basal melt rate. Herein, the magnitude and distribution of penetration are estimated for the case of a glacier resting on a deformable bed with channelized basal drainage. The distance between channels and the distribution of effective pressure across the bed are calculated, and special attention is paid to the interdependence of the basal melt rate and effective pressure. A major uncertainty is whether fine‐grained tills may impede or prevent regelation as a result of high surface tension at the ice/water interface. Predicted penetration depths range from millimetres to a few decimetres, and thus, dirty basal ice layers of such thicknesses might be expected. Predicted distances between channels agree well with those indicated by borehole measurements at Ice Stream B, West Antarctica. Effective pressures, and hence penetration depths, increase toward channels. Therefore, the edges of interfluves, bounded by anastomosing subglacial channels, should be eroded preferentially. This motivates the testable hypothesis that such erosion contributes to the formation of streamlined landforms, such as drumlins. Copyright © 2000 John Wiley & Sons, Ltd.     

Products of an effusive subglacial rhyolite eruption: Bláhnúkur, Torfajökull, Iceland

We present field observations from Bláhnúkur, a small volume (<0.1 km³) subglacial rhyolite edifice at the Torfajökull central volcano, south-central Iceland. Bláhnúkur was probably emplaced during the last glacial period (ca. 115–11 ka). The characteristics of the deposits suggest that they were formed by an effusive eruption in an exclusively subglacial environment, beneath a glacier >400 m thick. Lithofacies associations attest to complex patterns of volcano-ice interaction. Erosive channels at the base of the subglacial sequence are filled by both eruption-derived material and subglacial till, which show evidence for deposition by flowing meltwater. This suggests that meltwater was able to drain away from the vent area during the eruption. Much of the subglacial volcanic deposits consist of conical-to-irregularly shaped lava lobes typically 5–10 m long, set in poorly sorted breccias with an ash-grade matrix. A gradational lavabreccia contact at the base of lava lobes represents a fossilised fragmentation interface, driven by magma-water interaction as the lava flowed over poorly consolidated, waterlogged debris. Sets of columnar joints on the upper surfaces of lobes are interpreted as ice-contact features. The morphology of the lobes suggests that they chilled within conically shaped subglacial cavities 2–5 m high. Avalanche deposits mantling the flanks of Bláhnúkur appear to have been generated by the collapse of lava lobes and surrounding breccia. A variety of deposit characteristics suggests that this occurred both prior to and after quenching of the lava lobes. Collapse events may have occurred when the supporting ice walls were melted back from around the cooling lava lobes and breccias. Much larger lava flows were emplaced in the latter stages of the eruption. Columnar joint patterns suggest that these flowed and chilled within subglacial cavities 20 m high and 100–200 m in length. There is little evidence for magma-water interaction at lava flow margins which suggests that these larger cavities were drained of meltwater. As rhyolite magma rose to the base of the glacier, the nature of the subglacial cavity system played an important role in governing the style of eruption and the volcanic facies generated. We present evidence that the cavity system evolved during the eruption, reflecting variations in both melting rate and edifice growth that are best explained by a fluctuating eruption rate.     

Subglacial sediment production and snout marginal ice uplift during the late ablation season of a temperate valley glacier

Sediment export from glaciated basins involves complex interactions between ice flow, basal erosion and sediment transfer in subglacial and proglacial streams. In particular, we know very little about the processes associated with sediment transfer by subglacial streams. The Haut Glacier d'Arolla (VS, Switzerland) was investigated during the summer melt season of 2015. LiDAR survey revealed positive surface changes in the ablation zone, indicating glacier uplift, at the end of the morning during the period of peak ablation. Instream measures of sediment transport showed that suspended load and bedload responded differently to diurnal flow variability. Suspended load depended on the availability of fine material whereas bedload depended mainly on the competence of the flow. Interpretation of these results allowed development of a conceptual model of subglacial sediment transport dynamics. It is based upon the mechanisms of clogging (deposition) and flushing (transport/erosion) in sub-glacial channels as forced by diurnal flow variability. Through the melt season, the glacier hydrological response evolves from being buffered by glacier snow cover with a poorly developed subglacial drainage system to being dominated by more rapid ice melt with a more hydraulically efficient subglacial channel system. The resultant changes in the shape of diurnal discharge hydrographs, and notably higher peak flows and lower base flows, causes sediment transport to become discontinuous, with overnight clogging and late morning flushing of subglacial channels. Overnight clogging may be sufficient to reduce subglacial channel size, creating temporarily pressurized flow and lateral transfer of water away from the subglacial channels, leading to the late morning glacier surface uplift. However, without further data, we cannot exclude other hypotheses for the uplift. © 2018 John Wiley & Sons, Ltd.