共查询到20条相似文献,搜索用时 578 毫秒
1.
Norikazu Matsuoka 《地球表面变化过程与地形》2005,30(1):41-58
This paper describes up to ten years of continuous monitoring of frost heave, creep and associated parameters on high mountain crest slopes in the Japanese and Swiss Alps, aiming to evaluate spatial and interannual variations in the rates and controls of soil movement. Shallow frost creep re?ecting diurnal frost heave activity dominates the crest slopes that lack a vegetation mat and have a thin debris mantle with good drainage. Seasonal frost heave activity can induce slightly deeper movement where ?ne soil exists below the depth reached by diurnal freeze–thaw penetration, although the shallow bedrock impedes movements below 20 cm depth. As a result, downslope velocity pro?les display strong concavity with surface velocities of 2–50 cm a?1. The frost creep rates vary spatially, depending on the soil texture, slope gradient, frequency of temperature cycling across 0 °C and moisture availability during freeze–thaw periods. Soil movements recur in every freeze–thaw period, although with some interannual variations affected by the length of seasonal snow cover and the occurrence of precipitation during freeze–thaw periods. The Swiss Alps encounter more signi?cant interannual variations than the Japanese Alps, re?ecting the large variability of the annual snow regime. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
2.
Laboratory frost sorting by needle ice: a pilot experiment on the effects of stone size and extent of surface stone cover
下载免费PDF全文
![点击此处可从《地球表面变化过程与地形》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Sorted patterned ground is ubiquitous where gravelly fine soil experiences freeze–thaw cycles, but experimental studies have rarely been successful in reproducing such patterns. This article reports an attempt to reproduce miniature sorted patterns by repeating needle‐ice formation, which simulates frost sorting in regions dominated by diurnal freeze–thaw cycles. Six full‐scale laboratory models were tested. They consisted of near‐saturated volcanic fine soil topped by small stones of uniform size; the models explored a range of stone size (~6, ~12, ~17 and ~22 mm) and surface abundance (20, 40 and 60% cover). The stones were placed in a grid on the surface. These models were subjected to 20–30 temperature excursions between 10 °C and ?5 °C in 12 hours. The evolution of surface patterns were visually traced by photogrammetry. A data logging system continuously monitored vertical soil displacements, soil temperatures and moistures at different depths. All experimental runs displayed needle‐ice formation (2–3 cm in height) and resulting displacement of stones. The soil domains tended to heave faster and higher than the stones, leading to outward movement of the former and concentration of the stones. In plan view, smaller stones showed relatively fast and long‐lasting movements, while larger stones stabilized after the first five cycles. The 20% stone cover produced stone islands, whereas the 40% cover resulted in sorted labyrinths (a circle‐island complex) that may represent incipient sorted circles. The average diameter or spacing of these forms are 12–13 cm, being comparable to those in the field. The experiments imply that needle‐ice activity promotes rapid formation of sorted patterns, although the formation of well‐defined sorted circles may require hundreds of diurnal frost heave cycles. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
3.
Cold room physical modelling of periglacial solifluction processes on an experimental slope of 12° is described, and data on soil temperatures, surface frost heave, thaw consolidation, downslope soil movement and porewater pressures over seven freeze–thaw cycles are presented. These data are analyzed in the context of laboratory determination of the rheometry of the experimental soils at high moisture contents. It is concluded that the observed thaw-induced solifluction represents pre-failure soil shear strain and results from loss of strength due to the combined effects of raised porewater pressures during thaw consolidation and upward seepage pressures as water flows towards the surface away from the thaw front. An investigation of the rheometry of thawing soils offers the prospect of an analytical model to predict rates and depths of periglacial solifluction. © 1997 by John Wiley & Sons, Ltd. 相似文献
4.
Norikazu Matsuoka 《地球表面变化过程与地形》2001,26(6):601-614
Width and temperature of rock joints were automatically monitored in the Japanese Alps. Three years of monitoring on a sandstone rock face shows two seasonal peaks of joint widening in autumn and spring. The autumn events are associated with short‐term freeze–thaw cycles, and the magnitude of widening reflects the freezing intensity and water availability. The short‐term freezing can produce wedging to a depth of at least 20 cm. The spring events follow a rise in the rock surface temperature to 0 °C beneath the seasonal snowcover, and likely originate from refreezing of meltwater entering the joint. Some of these events contribute to permanent enlargement of the joint. Two other joints on nearby rock faces experience only sporadic widening accompanying freeze–thaw cycles and insignificant permanent enlargement. Observations indicate that no single thermal criterion can explain frost weathering. The temperature range at which wedging occurs varies with the bedrock conditions, water availability and duration of freezing. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
5.
Rock moisture during freeze–thaw events is a key factor for frost weathering. Data on moisture levels of natural rockwalls are scarce and difficult to obtain. To close this gap, we can benefit from the extensive knowledge of moisture‐related phenomena in building materials, which is incorporated into simulation software, for example the WUFI® package of the Fraunhofer Institute of Building Physics. In this paper we applied and adapted this type of simulation to natural rockwalls to gain new insights on which moisture‐related weathering mechanisms may be important under which conditions. We collected the required input data on physical rock properties and local climate for two study areas in the eastern European Alps with different elevation [Sonnblick, 3106 m above sea level (a.s.l.) and Johnsbach, 700 m a.s.l.] and different lithologies (gneiss and dolomite, respectively). From this data, moisture profiles with depth and fluctuations in the course of a typical year were calculated. The results were cross‐checked with different thermal conditions for frost weathering reported in the literature (volumetric expansion and ice segregation theories). The analyses show that in both study areas the thresholds for frost cracking by volumetric expansion of ice (90% pore saturation, temperature < ?1 °C) are hardly ever reached (in one year only 0.07% of the time in Johnsbach and 0.4% at Sonnblick, mostly in north‐exposed walls). The preconditions for weathering by ice segregation (?3 to ?8 °C, > 60% saturation) prevail over much longer periods; the time spent within this ‘frost cracking window‘ is also higher for north‐facing sites. The influence of current climate warming will reduce effective frost events towards 2100; however the increase of liquid precipitation and rock moisture will promote weathering processes like ice segregation at least at the Sonnblick site. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
6.
Stephen Dale Holness 《地球表面变化过程与地形》2004,29(1):91-103
Sediment transport in the scoria areas of Marion Island is primarily the result of needle‐ice‐induced frost creep associated with diurnal soil frost cycles. Clasts move most rapidly in ?ne textured areas (532 mm a?1; SD 382), more slowly in stony areas (161 mm a?1; SD 179), and most slowly in blocky areas (26 mm a?1; SD 23). Movement rates increase with increasing frost susceptibility of sediments, slope angle and altitude. The heave of dowels indicates that frost heave is active in all the scoria areas examined. The depth of effective frost heave increases with increasing altitude, with frost heave being restricted to the upper 100 mm of the soil in low altitude areas (<200 m). The heave of 150 mm dowels at the higher altitude sites provides evidence for segregation ice formation at depths greater than those associated with needle ice and diurnal soil frost cycles. Vertical movement pro?les show a concave downslope pro?le, with sediment movement rates being most rapid at the soil surface and decreasing rapidly with depth. This pro?le shape is typical of areas dominated by diurnal freeze–thaw cycles and needle ice. The capture of sediments moving downslope in troughs and the sampling of material lifted by needle ice, suggest that sediment transport by needle ice under present conditions is extremely effective. Observations suggest that although both ?ne material and clasts are transported downslope, some preferential transport of clasts occurs. Experiment results and observations of soil frost processes suggest that frost creep associated with needle ice activity is the dominant slope process in the scoria areas of Marion Island. Other slope processes such as slopewash and debris ?ows appear to play a relatively minor and localized role in sediment transport. It is suggested that needle ice activity is likely to be the dominant geomorphic agent in other areas of the Subantarctic with similar climatic characteristics to Marion Island. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
7.
DANIEL STADLER HANS WUNDERLI ADRIAN AUCKENTHALER HANNES FLÜHLER MICHAEL BRÜNDL 《水文研究》1996,10(10):1293-1304
Snow interception in a coniferous stand leads to considerable short-range variability in snowcover depth, which in turn affects the water and heat regime of the soil. To study the coupling between snow accumulation, frost penetration, and hydrological response, plot-scale experiments were conducted in a subalpine spruce forest. The stony, sandy–loamy Spodosol was highly permeable and had an organic layer of 5–15 cm thickness. Within two plots, one underneath a tree crown and one in a canopy gap, we measured near-surface runoff, soil temperature, and liquid water content. Snow and frost depths varied more in space than between two winter periods at given locations. Frost penetration was greater near the trunk, where a higher portion of snowmelt water drained downslope close to the surface than in the gap due to frost-induced reduction of infiltration. In both years, the spring snowmelt occurred over two distinct periods. During the first snowmelt, the water percolated primarily through the frozen layer and part of it probably refroze within the frozen layer, thereby raising the total water and ice content. During the second event, near-surface runoff was more pronounced. 相似文献
8.
Frost sorting on slopes by needle ice: A laboratory simulation on the effect of slope gradient
下载免费PDF全文
![点击此处可从《地球表面变化过程与地形》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Following a previous attempt to reproduce miniature sorted patterns on a level surface, we report the results of a full‐scale laboratory simulation on frost sorting produced by needle ice activity on inclined surfaces. Four models, with different slope gradients (5°, 7°, 9°, 11°), were designed. Stones 6 mm in diameter placed in a grid covered 20% of the surface of frost‐susceptible water‐saturated soil. These models were subjected to 20–40 freeze–thaw cycles between 10°C and ?5°C in 12 hours. The evolution of surface patterns was visually traced by photogrammetry. Needle ice growth and collapse induced downslope movement and concentrations of stones. A model produced incipient sorted circles on a 5° slope, whereas it resulted in three distinct sorted stripes on a 7° slope. The average diameter or spacing of these forms is 9.7–19.4 cm, comparable to those in the field dominated by diurnal freeze–thaw cycles. Surface parallel displacements of stone markers were traced with motion analysis software. The observed downslope stone displacements agree with those expected assuming that surface soil and stones move by repeated heaving perpendicular to the surface and vertical settlement due to gravity, although the growth of curved needle adds complexity to the overall displacements. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
Experiments are described in which chalk cubes were soaked in solutions of either sodium chloride, sodium sulphate, or magnesium sulphate at concentrations of 5·5 per cent and 12·5 per cent, or in a mixed solution of sodium chloride and sodium sulphate or in distilled water. After removal of excess liquid, the cubes were subjected to six freeze–thaw cycles with temperatures ranging from either +15 to ?10°C or +15 to ?30°C. The results confirm that frost weathering can be enhanced by the presence of certain salts, but the extent of weathering was much less than that previously reported for samples frozen totally immersed in the same liquids. Evidence is presented which suggests that salt crystallization is the major weathering process operative when non–immersed samples are frozen but a combination of frost and salt weathering operates when fully immersed samples are frozen. 相似文献
10.
Freeze-thaw processes in soils,including changes in frost and thaw fronts(FTFs),are important physical processes.The movement of FTFs affects soil hydrothermal characteristics,as well as energy and water exchanges between the land surface and the atmosphere and hydrothermal processes in the land surface.This paper reduces the issue of soil freezing and thawing to a multiple moving-boundary problem and develops a soil water and heat transfer model which considers the effects of FTF on soil hydrothermal processes.A local adaptive variable-grid method is used to discretize the model.Sensitivity tests based on the hierarchical structure of the Community Land Model(CLM)show that multiple FTFs can be continuously tracked,which overcomes the difficulties of isotherms that cannot simultaneously simulate multiple FTFs in the same soil layer.The local adaptive variable-grid method is stable and offers computational efficiency several times greater than the high-resolution case.The simulated FTF depths,soil temperatures,and soil moisture values fit well with the observed data,which further demonstrates the potential application of this simulation to the land-surface process model. 相似文献
11.
Permafrost on the Qinghai-Tibet Plateau (QTP) is widespread, thin, and thermally unstable. Under a warming climate during the past few decades, it has been degrading extensively with generally rising ground temperatures, the deepening of the maximum summer thaw, and with lessening of the winter frost penetration. The permafrost has degraded downward, upward and laterally. Permafrost has thinned or, in some areas, has totally disappeared. The modes of permafrost degradation have great significance in geocryology, in cold regions engineering and in cold regions environmental management. Permafrost in the interior of the QTP is well represented along the Qing-hai-Tibet Highway (QTH), which crosses the Plateau through north to south and traverses 560 km of permafrost-impacted ground. Horizontally, the degradation of permafrost occurs more visibly in the sporadic permafrost zone in the vicinity of the lower limit of permafrost (LLP), along the margins of taliks, and around permafrost islands. Downward degradation develops when the maximum depth of seasonal thaw exceeds the maximum depth of seasonal frost, and it generally results in the formation of a layered talik disconnecting the permafrost from the seasonal frost layer. The downward degrada- tion is divided into four stages: 1) initial degradation, 2) accelerated degradation, 3) layered talik and 4) finally the conversion of permafrost to seasonally frozen ground (SFG). The upward degradation occurs when the geothermal gradient in permafrost drops to less than the geothermal gradients in the underlying thawed soil layers. Three types of permafrost temperature curves (stable, degrading, and phase-changing transitory permafrost) illustrate these modes. Although strong differentiations in local conditions and permafrost types exist, the various combinations of the three degradation modes will ultimately transform permafrost into SFG. Along the QTH, the downward degradation has been proceeding at annual rates of 6 to 25 cm, upward degradation at 12 to 30 cm, and lateral degradation in the sporadic permafrost zone at 62 to 94 cm during the last quarter century. These rates exceed the 4 cm per year for the past 20 years reported for the discontinuous permafrost zone in subarctic Alaska, the 3 to 7 cm per year reported in Mongolia, and that of the thaw-stable permafrost in subarctic Yakutia and Arctic Alaska. 相似文献
12.
Abstract The rates of the accumulated and continuous displacement of solifluction lobes in the Kangchenjunga area, eastern Nepal Himalaya, were determined using glass fiber tubes and a strain probe. Ground temperature, precipitation and soil moisture were monitored at two sites, whose altitude differed by approximately 100 m, to understand the solifluction process. The average movement rate of the glass fiber tubes on a 31° slope at altitudes of 5412–5414 m a.s.l. was approximately 11 mm/year, being almost threefold greater than that observed on a 22° slope at 5322–5325 ma.s.l. There was no significant difference in the depth of displacement at these sites. The continuous displacement measurement near the ground surface at 5414 m showed permanent downslope movement from early July. Such movement may be attributed to additional moisture supply during the monsoon season. The amplitude of the displacement cycle was highest at the ground surface, and decreased to virtually zero at and below 20 cm in depth. Probable factors leading to the relatively slow rates of downslope displacement at the surface and depth at the studied altitudes are the lack of concurrence of the freeze–thaw cycles and the high moisture condition in the soil, and the low moisture retention capacity of the soil because of steep slopes and superficial desiccation. The rate of displacement may be more pronounced at altitudes above 5600 m because of the freeze–thaw cycles during the summer season. 相似文献
13.
The effect of repeated freezing and thawing cycles on an experimentally-produced laminated silt loam was studied with the purpose of obtaining more insight into the genesis of macro- and microstructures observed in the loessic formations of Northwestern Europe. The laminated silt loam was subsequently subjected to 18 cycles of alternate freezing and thawing. The minimum temperature recorded after 11 days of frost was ? 7°C at a depth of 5 cm and ? 4°C at 29 cm. The underlying sediments, compact loam (except its upper part) and sand, always remained unfrozen. The experiment reproduced a seasonal superficially frozen ground. New structures and microfabrics in the form of vesicles, platy structures, shear planes, and micro-undulations were created by ice segregation and thawing, mechanical stress and subsequent frost-creep. The impact of the freezing and thawing cycles is very strong, all the laminae being deformed or broken. Judging by the abundance and the diversity of the structures created, freezing is a more important process than simple drying without frost. As is evidenced by the range in temperature chosen for the experiment and the low number of cycles, these structures do not necessarily require severe climatic conditions to develop, unlike frost cracks or ice wedge casts. They could develop in winter conditions similar to those present today in the French Southern Alps. 相似文献
14.
Water flow velocity is an important hydraulic variable in hydrological and soil erosion models, and is greatly affected by freezing and thawing of the surface soil layer in cold high-altitude regions. The accurate measurement of rill flow velocity when impacted by the thawing process is critical to simulate runoff and sediment transport processes. In this study, an electrolyte tracer modelling method was used to measure rill flow velocity along a meadow soil slope at different thaw depths under simulated rainfall. Rill flow velocity was measured using four thawed soil depths (0, 1, 2 and 10 cm), four slope gradients (5°, 10°, 15° and 20°) and four rainfall intensities (30, 60, 90 and 120 mm·h−1). The results showed that the increase in thawed soil depth caused a decrease in rill flow velocity, whereby the rate of this decrease was also diminishing. Whilst the rill flow velocity was positively correlated with slope gradient and rainfall intensity, the response of rill flow velocity to these influencing factors varied with thawed soil depth. The mechanism by which thawed soil depth influenced rill flow velocity was attributed to the consumption of runoff energy, slope surface roughness, and the headcut effect. Rill flow velocity was modelled by thawed soil depth, slope gradient and rainfall intensity using an empirical function. This function predicted values that were in good agreement with the measured data. These results provide the foundation for a better understanding of the effect of thawed soil depth on slope hydrology, erosion and the parameterization scheme for hydrological and soil erosion models. 相似文献
15.
Oliver Sass 《地球表面变化过程与地形》2005,30(3):359-374
Rock moisture is an important factor for the intensity and distribution of frost weathering processes. However, quantitative measurements are scarce, which is partly due to the lack of reliable measurement techniques. This paper presents five different techniques for obtaining rock moisture data. While collecting rock pieces and two‐dimensional geoelectric measurements allow determination of the spatial moisture distribution, the temporal variability can be derived from conductivity and time domain reflectometry records. Computer simulations, using rock properties and climatic records as input data, render it possible to clarify the important aspects that are responsible for the moisture distribution. It proved to be advisable to use several methods to check and validate the results. The results, obtained in study areas in the Bavarian Alps, make it clear that direct rainfall is the main source of rock moisture. The influence of snow is limited to the immediate vicinity of the snow fields and is not equally pronounced at different times and positions. Rock moisture levels are higher in summer than they are in winter, since in winter less water is supplied in liquid form. Northerly exposed rockwalls are generally more moist than those exposed in a southerly direction, which is due to the different insolation as well as to the wind direction during rainfall. In every position the rock is, on average, wetter on the inside than it is on the surface. This means that shallow frost cycles, as typical for south‐exposed sites, are not affecting weathering, since they take place at a depth level that is mostly dried out. Numerous spatial and temporal patterns of rockfall found in the same study areas can be explained through variations in rock moisture. Thus, the moisture content of the rock is considered to be one of the major controlling factors of the frost‐shattering rate. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
16.
Field experiments were carried out over a five year period with the aim of understanding contemporary weathering and erosional environments in the Sør Rondane Mountains, an Antarctic cold desert region. These include observations of (1) scaling from rockwalls, (2) disintegration of tuff blocks with or without saline solutions, and (3) abrasion of artificial walls by wind. Monitoring was also made of rock surface temperature and wind speed. Despite frequent temperature oscillations across 0°C, rock scaling due to frost action was generally very slow because of low moisture content in the rockwalls. Exposure to the cold, dry climate led to the rapid disintegration of porous tuff blocks including soluble salts like halite and thenardite. This indicates that rates of weathering are increased greatly with the accumulation of such salts in the bedrock. Although gypsum did not cause any visible damage over four years, its widespread occurrence in heavily damaged rocks demonstrates that increasing gypsum contents may also intensify rock breakdown. The snow-laden katabatic wind resulted in rapid wearing of the windward face of an asbestos board with the peak erosion at 30–40 cm above the ground. Nonetheless, the landforms expected from the unidirectional wind characteristics are by no means common features because of lack of abrasive materials, such as snow and sand particles. These experiments suggest that frost weathering and wind erosion are only locally effective where plenty of moisture or an abrasive material is available, whilst salt weathering and removal of the waste by wind play a major role in constructing erosional landforms over the mountains. 相似文献
17.
A field study evaluating wetted radius (Wr), downward depth (Dd), and upward movement (Um) under different emitter discharges and lateral depths was conducted. Four emitter discharges (2, 4, 8, and 16 L/h) and four lateral depths (0, 10, 20, and 30 cm) were tested in a clay loam soil. Relationships were found between the emitter discharge and lateral depth versus Wr, Dd, and Um. Wetting area at the surface occurs under different emitter discharges and lateral depths except at 30 cm lateral depth. At lateral depth of 0 and 10 cm, Wr and emitter discharge were positively correlated. The Dd was not affected by emitter discharge except for laterals installed at 20 cm depth. At 30 cm lateral depth, the correlations between each of Wr, Um, and Dd with emitter discharge were poor. The ratios of Wr/Dd and Um/Dd, with respect to emitter position, were less than unity over different emitter discharges and lateral depths. These results shed some light on the design of subsurface drip irrigation scheme so that the spacing between emitters should be determined based on the lateral depths and discharge of emitters. Evaporation losses were negligible for the 30‐cm‐lateral depth since the upward moisture movement has not reached the soil surface area at all discharge rates tested in the study. 相似文献
18.
To determine how soil frost changes flowpaths of runoff water along a hillslope, a transect consisting of four soil profiles directed towards a small stream in a mature forest stand was investigated at Svartberget, near Vindeln in northern Sweden. Soil temperature, unfrozen water content, groundwater level and snow depth were investigated along the transect, which started at the riparian peat, and extended 30 m upslope into mineral soils. The two, more organic‐rich profiles closest to the stream had higher water retention and wetter autumn conditions than the sandy mineral soils further upslope. The organic content of the soil influenced the variation in frost along the transect. The first winter (1995–96) had abnormally low snow precipitation, which gave a deep frost down to 40–80 cm, whereas the two following winters had frost depths of 5–20 cm. During winter 1995–96, the two organic profiles close to the stream had a shallower frost depth than the mineral soil profile higher upslope, but a considerably larger amount of frozen water. The fraction of water that did not freeze despite several minus degrees in the soil was 5–7 vol.% in the mineral soil and 10–15 vol.% in the organic soil. From the measurements there were no signs of perched water tables during any of the three snowmelt periods, which would have been strong evidence for changed water flowpaths due to soil frost. When shallow soil layers became saturated during snowmelt, especially in 1997 and 1998, it was because of rising groundwater levels. Several rain on frozen ground events during spring 1996 resulted in little runoff, since most of the rain either froze in the soil or filled up the soil water storage. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
19.
M. Font J.‐L. Lagarde D. Amorese J.‐P. Coutard A. Dubois G. Guillemet J.‐C. Ozouf E. Vedie 《地球表面变化过程与地形》2006,31(14):1731-1745
Physical modelling has been developed in order to simulate the effects of periglacial erosion processes on the degradation of slopes and scarps. Data from 41 experimental freeze–thaw cycles are presented. They attest to the efficiency of periglacial processes that control both erosion and changes in scarp morphology: (i) cryoexpulsion leads to an increase of scarp surface roughness and modifies significantly the internal structure of the active layer; (ii) combined effects of frost creep and gelifluction lead to slow and gradual downslope displacements of the active layer (0·3 cm/cycle); (iii) debris flows are associated with the most significant changes in scarp morphology and are responsible for the highest rate of scarp erosion; (iv) quantification of the erosion rate gives values close to 1 cm3 cm?2 for 41 freeze–thaw cycles. These experimental results are consistent with field data acquired along the La Hague fault scarp (Normandy, France) where an erosion rate of 4·6 ± 1 m3 m?2 per glacial stage has been computed from the volume of natural slope deposits stored during the Weichselian glacial stage. These results show that moist periglacial erosion processes could lead to an underestimation of Plio‐Quaternary deformation in the mid‐latitudes. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
20.
Kevin Hall 《地球表面变化过程与地形》2004,29(1):43-57
Discussions regarding weathering in cold environments generally centre on mechanical processes and on the freeze–thaw mechanism in particular. Despite the almost ubiquitous assumption of freeze–thaw weathering, unequivocal proof of interstitial rock water actually freezing and thawing is singularly lacking. Equally, many studies have used the crossing of 0 °C, or values close to that, as the basis for determining the number of ‘freeze–thaw events’. In order to assess the weathering regime at a site in northern Canada, temperatures were collected at the surface, 1 cm and 3 cm depth for sets of paving bricks, with exposures both vertical and at 45°, orientated to the four cardinal directions. Temperature data were collected at 1 min intervals for 1 year. These data provide unequivocal proof for the occurrence of the freezing and thawing of water on and within the rock (freeze–thaw events). The freeze event is evidenced by the exotherm associated with the release of latent heat as the water actually freezes. This is thought to be the ?rst record of such events from a ?eld situation. More signi?cantly, it was found that the temperature at which freezing occurred varied signi?cantly through the year and that on occasion the 1 cm depth froze prior to the rock surface. The change in freeze temperature is thought to be due to the chemical weathering of the material (coupled with on‐going salt inputs via the melting of snowfall), which, it is shown, could occur throughout the winter despite air temperatures down to ?30 °C. This ?nding regarding chemical weathering is also considered to be highly signi?cant. A number of thermal stress events were also recorded, suggesting that rock weathering in cold regions is a synergistic combination of various chemical and mechanical weathering mechanisms. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献