Tafoni development in a cryotic environment: an example from Northern Victoria Land,Antarctica

Tafoni are a type of cavernous weathering widespread around the world. Despite the extensive distribution of the tafoni, their genesis is not clear and is still a matter of debate, also because they occur in such different climatic conditions and on so many different types of substrate. Geomorphological characterization of more than 60 tafoni in three different Antarctic sites (two coastal and one inland) between 74 and 76° S with sampling of weathering products and salt occurrences are described together with thermal data (on different surfaces) and wind speed recorded in different periods of the year in a selected tafone close to the Italian Antarctic station. The aim of this present study is to provide further information to help understand the processes involved in the growth of tafoni in a cryotic environment, and the relationship of these processes to climate, with particular attention to the thermal regime and the role of wind. The new data presented in this paper suggest that there is no single key factor that drives the tafoni development, although thermal stress seems the most efficient process, particularly if we consider the short‐term fluctuations. The data also confirm that other thermal processes, such as freezing–thawing cycles and thermal shock, are not really effective for the development of tafoni in this area. The wind speed measured within the tafoni is half that recorded outside, thus favouring snow accumulation within the tafoni and therefore promoting salt crystallization. On the other hand, the wind effect on the thermal regime within the tafoni seems negligible. While both salt weathering and thermal stress appear active in this cryotic environment, these are azonal processes and are therefore active in other climatic areas where tafoni are widespread (such as the Mediterranean region). Copyright © 2007 John Wiley & Sons, Ltd.     

Cavernous weathering in the Capitol Reef Desert,Utah

Tafoni and honeycomb weathering are abundant in sandstones at Capitol Reef National Park. Cavities are particularly common in talus blocks resting on alkali-rich soil, in vertical walls of desert washes, and in sandstones containing calcareous cement. Chemical analyses, X-ray diffraction data, and field observations suggest that salt weathering is the most important cause of disintegration, but dissolution of calcite cement also occurs in calcareous sandstones. Cavernous weathering at Capitol Reef produces cavities similar in appearance to features found in arkose outcrops along the coast of northwest Washington, even though the environmental conditions at these two locations are very different.     

A Morphological Study of Greenschist Weathering on Dated Coastal Structures,South Devon,UK

Three dated structures up to 450 years in age display the effects of coastal weathering of the greenschist of which they are constructed. A variety of weathering forms is present. The various topographic surfaces of the structures create variation in weathering environments and consequent weathering processes and rates. Weathering is enhanced by direct exposure to salt-bearing spray and by humid conditions, and apparently limited by direct exposure to solar radiation. The maximum rates of weathering on the three surfaces approximate to 0·6 mm a⁻¹ over this period, consistent with measured contemporary weathering rates for a natural surface formed by this rock type in a nearby coastal location. © 1997 by John Wiley & Sons, Ltd.     

Geometrical simulation studies of coastal cliff failures in liassic strata,South Wales,U.K.

Three numerical models of cliff failure have been developed, based on analyses of rockfalls along the 22 km Liassic coastline of the Glamorgan Heritage Coast, U.K. Detailed field investigation of the bucklandi (limestone dominated) and angulata (mudstone dominated) Lias series at four locations confirm the veracity of the models. Translation failure was correctly predicted at the mainly limestone buttressed cliff sites in the bucklandi and at locations where the angulata series formed a high proportion of the cliff mass. Toppling was predicted for vertical and overhanging cliffs with basal undercutting. The factor of safety reduces as the ratio of undercutting depth (d) to tension fracture distance (D) from the cliff face increases. Instability can be triggered by thrust forces generated by wave/tide impact, freeze/thaw and expansion/contraction associated with clay infill. Thrust forces can be modest, ranging from 1·7 to 2·7 MN m², but can exceed the cross-joint strength as weathering proceeds.     

Out of sight but not out of mind: Harmful effects of derelict traps in selected U.S. coastal waters

There is a paucity of data in the published literature on the ecological and economic impacts of derelict fishing traps (DFTs) in coastal ecosystems. We synthesized results from seven NOAA-funded trap fisheries studies around the United States and determined that DFT-caused losses to habitat and harvestable annual catch are pervasive, persistent, and largely preventable. Based on this synthesis, we identified key gaps to fill in order to better manage and prevent DFTs. We conclude with suggestions for developing a U.S. DFT management strategy including: (1) targeting studies to estimate mortality of fishery stocks, (2) assessing the economic impacts of DFTs on fisheries, (3) collaborating with the fishing industry to develop solutions to ghost fishing, and (4) examining the regional context and challenges resulting in DFTs to find effective policy solutions to manage, reduce, and prevent gear loss.     

Colonisation of epilithic diatom population of the River Taff, South Wales, U.K.

1. A light and scanning electron microscopic study of the structure of epilithic diatom communities was carried out at two sites on the River Taff, South Wales, an upstream unpolluted site (Site 1) and a downstream polluted site (Site 2). 2. Community structure at the micro-scale revealed that, although communities at both sites were similar in terms of species present (similarity indices ranging between 0.44 and 0.96), they were very different with respect to their physical structure. 3. The traditional approach in studying epilithic diatom communities ignores information relating to community structure. The combination of light and scanning electron microscopy proved to be most useful for studying the epilithic diatom communities. 4. The examination of community succession on stone substrata showed that communities were highly dynamic on a weekly time scale, which suggests that the “age” of a substratum is a very important determinant of the attaching communities. A change from a prostate, two-dimensional community structure to an erect, three-dimensional community structure, and a shift from the dominance of epilithic diatoms to the dominance of epiphytic diatoms were noted. Such a change was more noticed at the polluted downstream site, possibly due to a higher rate of surface pre-conditioning and biofilm production at this site than at the unpolluted upstream site.     

Sediment transfer and transformation of an alluvial valley floor: The river South Tyne,Northumbria, U.K.

The amounts of alluvial storage and the mechanisms responsible for the dispersal of sediment associated with historic metal mining are examined for a 115 year timespan on a 22 km reach of the River South Tyne, northern England. Analysis of lateral and vertical channel change over this period, the extent of actively reworked gravels, and identification of metals in alluvial units, show five ‘sedimentation zones’ separated by more stable reaches. Aggradation in the late nineteenth century was followed by a period of storage and local reworking, and then incision. Some reaches show short-term storage of sediment injected from tributaries which may be dispersed by floods. There is some evidence of transfer of sediment bodies downvalley within sedimentation zones, and of a sediment ‘wave’ movement between zones in lower parts of the South Tyne investigated. Present-day incision, the variation in the area of actively reworked gravel spreads, and the widespread dispersal of fine-grained toxic metal mining wastes all have practical implications. The intricate response of the channel system to historic changes in sediment supply is not readily described by either a complex response model or a simple translatory wave.     

The Alabama,U.S.A., seismic event and strata collapse of May 7, 1986

On May 7, 1986, the residents of Tuscaloosa, Alabama, felt a seismic event of local magnitude 3.6 that occurred at the same time as a rock burst and roof collapse in an active longwall coal mine. Visual inspection of the seismograms reveals a deficiency in energy at frequencies above 20 Hz compared to tectonic earthquakes or surface blasts. The predominance of energy below 5 Hz may explain reports of body wave magnitudes (m _b ) greater than 4.2. Also, 1.0 Hz surface waves were more strongly excited than body waves and may explain local felt effects more typically associated with greater epicentral distances. All recorded first motions were dilatational. The concentration of stations in the northern hemisphere allows reverse motion on an east-trending near-vertical plane or strike-slip motion on northwest or southeast trending planes. The reverse focal mechanism is preferred, because the area of roof collapse and the area of active longwall mining are located between two east-striking loose vertical fracture zones. The characteristics of the seismic event suggest that it might have been sudden shear failure resulting from accumulated strain energy in overlying strata behind an active longwall. Although an alternate interpretation of the focal mechanism as an implosion or shear failure in the strata above previously mined out areas is also allowed by the first motion data, this alternate intepretation is not supported by geological data.     

Sediment dynamics in the Castleton karst,Derbyshire, U.K.

Chemical and mineralogical data are presented for a suite of 59 sediment samples collected from the P8 and Speedwell cave systems (and mineralogical data are presented for a further six surface sediments) in the Castleton karst catchment, Derbyshire, England. Sediments are grouped according to age and depositional environment and these groups show distinctive mineralogical and chemical characteristics. Clay mineralogy is effective at distinguishing different sediment sources for ancient and modern sediments which are derived from pre-Devensian tills and Devensian solifluction deposits, respectively. Major element chemistry reflects these differences in clay mineral content, while trace elements demonstrate the importance of abrasion of ore minerals in conduits in the aquifer which follow mineral veins, even under natural, pre-mining conditions. Clay minerals are confirmed as the host for uranium in uranium-rich ancient sediments. Consideration of organic carbon and hydrogen concentrations shows that plant material is the dominant source of organic material in the modern sediments. Copyright © 1999 John Wiley & Sons, Ltd.     

The abundance, composition and sources of marine debris in coastal seawaters or beaches around the northern South China Sea (China)

The abundance and composition of marine debris including floating marine debris (FMD), seafloor marine debris (SMD) and beached marine debris (BMD) were investigated in coastal seawaters/beaches around the northern South China Sea during 2009 and 2010. The FMD density was 4.947 (0.282-16.891) items/km², with plastics (44.9%) and Styrofoam (23.2%) dominating. More than 99.0% of FMD was small or medium size floating marine debris. The SMD and BMD densities of were 0.693 (0.147-5.000) and 32.82 (2.83-375.00) items/km², respectively. SMD was composed of plastics (47.0%), wood (15.2%), fabric/fiber (13.6%) and glass (12.1%), while BMD was composed of plastics (42.0%) and wood (33.7%). More than 90% of FMD, 75% of SMD and 95% of BMD were not ocean-based sources but land-based sources, mostly attributed to coastal/recreational activity, because of the effect of human activities in the areas.     

International Pellet Watch: Global monitoring of persistent organic pollutants (POPs) in coastal waters. 1. Initial phase data on PCBs, DDTs, and HCHs

Samples of polyethylene pellets were collected at 30 beaches from 17 countries and analyzed for organochlorine compounds. PCB concentrations in the pellets were highest on US coasts, followed by western Europe and Japan, and were lower in tropical Asia, southern Africa and Australia. This spatial pattern reflected regional differences in the usage of PCBs and was positively correlated with data from Mussel Watch, another monitoring approach. DDTs showed high concentrations on the US west coast and in Vietnam. In Vietnam, DDT was predominant over its metabolites (DDE and DDD), suggesting the principal source may be current usage of the pesticide for malaria control. High concentrations of pesticide HCHs were detected in the pellets from southern Africa, suggesting current usage of the pesticides in southern Africa. This study demonstrates the utility and feasibility of the International Pellet Watch approach to monitor POPs at a global scale.     

Influence of mineral weathering reactions on the chemical composition of soil water,Springs, and ground water,Catoctin Mountains,Maryland

During 1983 and 1984, wet precipitation was primarily a solution of dilute sulphuric acid, whereas calcium and bicarbonate were the major ions in springs and ground water in two small watersheds with a deciduous forest cover in central Maryland. Dominant ions in soil water were calcium, magnesium, and sulphate. The relative importance of mineral weathering reactions on the chemical composition of these subsurface waters was compared to the contribution from wet precipitation, biological processes, and road deicing salts. Mineral reaction models, developed from geochemical mass-balance relationships, involved reactions of primary and secondary minerals in metabasalt and metarhyolite with hydrogen ion. Geochemical weathering reactions account for the majority of total ion equivalents in soil water (46 per cent), springs (51 per cent), and ground water (68 to 77 per cent). The net contribution of total ion equivalents from biological processes was 20 and 16 per cent for soil water and springs, respectively, but less than 10 per cent for ground water. The contribution of total ion equivalents from deicing salts (10 to 20 per cent) was related to proximity to roads. Strong acids in precipitation contributed 44 per cent of the total amount of hydrogen ions involved in mineral-weathering reactions for ground water in contact with metarhyolite compared to 25 per cent for ground water in contact with metabasalt, a less resistant rock type to weathering.     

Rates and patterns of erosion on inter-tidal shore platforms,Kaikoura Peninsula,South Island,New Zealand

This paper presents measured rates of erosion on shore platforms at Kaikoura Peninsula, South Island, New Zealand. Surface lowering rates were measured with a micro-erosion meter and traversing micro-erosion meter. The mean lowering rate for all shore platforms was 1·130 mm a⁻¹. Differences in lowering rates were found between different platform types and lithologies. The rate of surface lowering on Type A (sloping) mudstone platforms was 1·983 mm a⁻¹, and 0·733 mm a⁻¹ on Type B mudstone platforms (subhorizontal). On limestone platforms the lowering rate was 0·875 mm a⁻¹. A previously reported cross-shore pattern of surface lowering rates from Kaikoura was not found. Rates were generally higher on the landward margins and decreased in a seaward direction. Season is shown statistically to influence erosion rates, with higher rates during summer than winter. The interpretation given to this is that the erosive process is subaerial weathering in the form of wetting and drying and salt weathering. This is contrary to views of shore platform development that have favoured marine processes over subaerial weathering. Copyright © 1998 John Wiley & Sons, Ltd.     

Temporal trends of brominated flame retardants in coastal waters of Japan and South China: Retrospective monitoring study using archived samples from es-Bank, Ehime University, Japan

The present paper is a summary of studies conducted at the Center for Marine Environmental Studies, Ehime University, on temporal trends of brominated flame retardants (BFRs) in coastal waters of Japan and South China. Archived marine mammal fat tissues and dated sediment cores were used to evaluate temporal trends of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) in relation to their usage in the region. The results indicate that environmental concentrations of these BFRs in Japan and South China increased significantly during the last several decades. Temporal trends in the contaminant concentrations were consistent with historical consumption of the corresponding BFRs. PBDE levels in marine mammals and sediments from Japan, after showing peak concentrations in the 1990s, appear to be leveling off in recent years, in accordance with the discontinued usage of Tetra- and Octa-BDEs in Japan from the 1990s. The change in concentration levels was also accompanied by changes in PBDE congener profiles, i.e. shift towards increased proportion of higher brominated BDEs. Furthermore, in recent years HBCD concentrations in marine mammals from Japan appear to exceed those of PBDEs, presumably reflecting increasing usage of HBCDs over PBDEs. In finless porpoises from the South China Sea, PBDE levels were much higher than HBCD concentrations both in the past and recent years, implying consumption of HBCDs was not as high as that of PBDEs in China. In dated sediment cores from Tokyo Bay, concentrations increased exponentially with doubling times of 4.6–7.9 years, 6.1–12 years and 7.1–12 years for BDE-209, ΣPBDEs and HBCDs, respectively.     

The influence of rock mass strength on glacial valley cross-profile morphometry: A case study from the Southern Alps,New Zealand

The erosional morphology in the vicinity of the Main Divide of the Southern Alps, and Fiordland, New Zealand, appears to be a product of the interaction between Alpine Fault-induced tectonic processes, rock mass strength of the uplifted and eroded bedrock, and the processes acting to denude the developing mountain landscape. The magnitude of the effects of glacial erosion on the landscape is directly controlled by the size and physical properties of the glaciers, whilst the form of the trough is a direct consequence of the rock mass strength (RMS) properties of the slope rock. Realistic models of development of the cross-profile shape of glacial valleys must take into consideration the RMS properties of the eroded substrate.     

Regional variation of mechanical and chemical denudation,upper Colorado River Basin,U.S.A.

The variation of mechanical and chemical denudation is investigated using discharge and sediment yield data from the Upper Colorado River System. Annual precipitation ranges from approximately 150 mm to 1500 mm. Mean specific yield ranges from 0-2 1/s km² ( = 6 mm p a) to 151/s km² ( = 475 mm p a). The hydrological-geomorphological system adjusts itself to these varying climatic conditions; in some areas, however, the effects of lithology or land use seem to override the climatic controls. It is demonstrated that the increase in the absolute and particularly the relative amount of suspended sediment is closely related to a decrease in annual runoff and to an increase in the importance of high magnitude/low frequency events. This indicates that in areas of low annual runoff and high runoff variability, soluble rocks are more resistant than in more humid areas. During high magnitude/low frequency events, suspended sediment concentrations and loads are very high in semiarid areas due to sparse vegetation cover and dominance of direct runoff. Events of moderate magnitude and frequency, which in more humid areas transport most of the dissolved load, seldom occur. The trend towards increasing mechanical denudation is even observed in areas of very low runoff (0-221/s km² = 7 mm p a). The peak of sediment yield in dry areas seems to approximate the point of no runoff very closely. Mechanical and chemical denudation are of equal importance at a runoff of about 300 mm per year.     

River behaviour and Holocene alluviation: The River Severn at Welshpool,mid-Wales,U.K.

A combination of archaeological evidence, ¹⁴C dates, terrace mapping, heavy metal analysis, grain size analysis and historical maps is used in a detailed analysis of the alluvial history of the River Severn floodplain around Welshpool in mid-Wales, U.K. ‘Welshpool Gravels’ underlie a higher terrace surface up to 6–7 m above the present channel. They form a sequence of gravels at least 30 m in thickness. The upper surface is characterized by a series of braided palaeochannel patterns. These sediments were probably deposited at the end of the last glaciation as outwash, and are contemporaneous with other high, gravelly terrace deposits found in the Severn and other mid-Wales basins. Overlying the Welshpool Gravels on the contemporary floodplain are a variable thickness of finer sediments, the ‘Leighton Silts’. Morphological mapping and dating of two cut-offs to 2850 ± 60 a BP and 1190 ± 70 a BP indicates that a channel pattern similar to the present planform had formed by the mid to late Holocene. From this period, floodplain development has been dominated by a single-thread meandering channel with fine vertical sedimentation and limited lateral gravel accretion. Abandonment of extended lengths of channel formed by an avulsion mechanism is apparent. A combination of historical map data, ¹⁴C dates and the analysis for heavy metals in fine sediments, which were washed into the river system during mining, indicates that there has been at least 4 m of sedimentation since the early 17th century, but only in a central belt of varying width. Metal-rich waste, identified in the fine sediments of this zone of ‘Trehelig Silts’, indicates those areas which were most heavily sedimented during the peak of metalliferous mining in the 18th and 19th centuries. Although the near-channel margins appear to be superficially similar to the older floodplain, the spatial and vertical pattern of historic sedimentation is complex, and is not reflected in marked elevation differences. The division of sedimentation periods into these three broad time-spans (Late Quaternary Terraces, Late Holocene alluviation and avulsion, and the historical metal-mining period) shows that an apparently simple planar floodplain is in reality underlain by complex sedimentation units. Floodplain construction has involved the development of inset units, in cut-offs and adjacent to migrating channels, as well as the expected contrasts between in-channel and overbank environments. This has implications both for alluvial sedimentation modelling and for the identification of high-pollution zones on the floodplain. These cannot be predicted on the basis of simple ‘in-channel’ and ‘overbank’ environments given the historically complex evolution.     

Textural analysis and modelling of a flood deposit: River severn,U.K.

Samples of sediment collected from the Severn floodplain between Worcester and Gloucester following the severe flooding in January and February 1990, were analysed for their grain size distribution. The results show that most sand was deposited within 20 m of the channel bank, but that fine sand may contribute to flood sediment across the width of the floodplain. James' (1985) numerical model of overbank sedimentation attempts to predict the transfer of sediment to the floodplain during flooding. Geometrical and hydraulic data relating to the Severn flood are used as input for a computer program of James' (1985) model. The pattern of sediment concentrations predicted by the model was compared with that obtained from statistical analysis of the flood sediment. The patterns were found to be similar, so James' (1985) model was considered to predict in a relative sense the distribution of flood sediment.     

Physical and chemical characteristics of a metal-contaminated overbank deposit,west-central South Dakota,U.S.A.

A metal-contaminated overbank deposit in west-central South Dakota resulted from the discharge of a large volume of mine tailings into a river system between the late 1800s and 1977. The deposit along the Belle Fourche River is typically up to 2 m thick and extends about 90 m away from the channel along the insides of meander bends. The sediments contain above-background levels of copper, iron, manganese, zinc, and particularly arsenic, which is commonly two orders of magnitude above background level in the contaminated sediments. Carbonate minerals in the deposit limit the desorption of arsenic by preventing acid formation. Arsenic concentrations provide a measure of the dilution of mine tailings by uncontaminated sediment. The arsenic appears to have been transported and deposited as arsenopyrite, but is now at least partially associated with iron oxides and hydroxides. Within individual samples, arsenic concentration has an inverse relation with grain size that results from the more efficient accumulation of arsenic on the greater surface area of the smaller particles. Arsenic concentration is inversely related to the sample weight percent finer than 16 μm, however, as a consequence of the dilution of the contaminated sediments by uncontaminated sediment with a finer grain-size distribution. Dilution by uncontaminated sediment from tributaries cause arsenic concentrations to decrease by a factor of 3 along 100 km of floodplain. An influx at high streamflow of uncontaminated sediment from terraces and the premining floodplain as well as from tributaries causes arsenic concentrations in parts of the contaminated deposit that are farthest away from the channel to be two to three times less than arsenic concentrations in overbank sediment that is immediately adjacent to the channel.