季节性河流体系高流态沉积构造特征:以内蒙古岱海湖半滩子河为例*

高流态尤其是超临界流动的水动力学机制及其床沙底形演化的研究相较于次临界流动具有一定的差距。季节性河流以高流态为主要沉积搬运过程,为超临界流的形成与保存提供了有利条件,是研究超临界流沉积的重要载体。在季节性河流沉积体系研究进展调研基础上,明确了其基本定义、判别标准及沉积特征。通过对内蒙古岱海湖北部典型季节性冲积体系——半滩子河流发育的沉积构造进行研究表明:随着低流态向高流态演化,沙丘底形(Dune)逐步向上部平坦床沙底形(Upper plane bed)过渡,形成了低角度/S型交错层理;在高流态初期,形成了上部平坦床沙成因的平行层理;随着流动强度逐渐增大,流动机制演变为超临界流,平坦床沙逐渐向逆行沙丘(Antidune)过渡,形成了与平行层理伴生的逆行沙丘交错层理;当流动强度进一步增大,携带沉积物的流体发生较强的水力跳跃,形成了流槽与冲坑(Chute-and-Pool)。半滩子河流现代沉积中发育的高流态沉积与区域内气候变化具有明确的响应关系,表明河流沉积中广泛发育的高流态沉积构造指示了强烈季节性变化的气候特征。     

Structures and sequences in early Permian fluvial Barakar rocks of peninsular India Gondwana basins using binomial and Markov chain analysis

Cyclic characteristics of bed forms (sedimentary structures) of early Permian fluvial Barakar rocks are studied statistically, using quasi-independence Markov chain and entropy. The hierarchy of sedimentary structures confirms that the corresponding bed forms do not represent random depositional event and follow a definite pattern of Markovian mechanism in a predictable cyclic arrangement. The preferential upward transition of sedimentary structures that can be derived for the Barakar sandstone is scoured surface (Ss) → horizontal bedding (Sh) → planar cross-bedded sandstone (Sp) → trough cross-bedded sandstone (St) → ripple cross-lamination (Sr) → parallel lamination (Fl) → scoured surface (Ss). The sequence is an asymmetrical cycle and characteristic of the lateral accretion and aggradations of fluvial channels. Entropy analysis corroborate the above inference, and E ^(pre) vs E^(post) plots for each sedimentary structure correspond to the type B category, suggesting lower and upper truncated asymmetrical cycles. Hydro-dynamically, the Barakar cycles represent a vertical sequence of bedding types which implies a steady upward decrease in the intensity of flow—from the upper flow regime in the lower part, the lower flow regime of moderate to high intensity in the middle part, and the lower flow regime of low to very low intensity in the upper part.     

Preservation of pre-vegetational mixed fluvio–aeolian deposits in a humid climatic setting: an example from the Middle Proterozoic Eriksfjord Formation, Southwest Greenland

Sedimentological studies of a 30 m thick coastal cliff section within the Middle Proterozoic Eriksfjord Formation in western South Greenland reveals three distinct types of fluvial sand sheet deposits that reflect perennial streams (Type I), semi-perennial streams (Type II), and ephemeral flash floods (Type III). Perennial river sand sheets are characterised by co-sets of medium-scale trough cross-beds, interbedded with isolated medium- and large-scale, high-angle, tabular cross-beds. Indications of desiccation or subaerial exposure are absent. Semi-perennial fluvial sand sheets consist predominantly of low-angle cross-beds, interbedded with isolated sets of high-angle tabular cross-beds with common reactivation surfaces. Horizontal lamination and climbing ripple lamination form subordinate structures. Associated with the sand sheets are adhesion structures and 0.05–0.4 m thick sets of wind ripple-lamination indicating periods of subaerial exposure and aeolian reworking. High-energy ephemeral flash flood sand sheets consist almost exclusively of planar-parallel lamination and climbing ripple lamination with some isolated sets of low-angle cross-bedding. Scouring and internal truncation surfaces are common. The three types of sand sheets are considered to reflect deposition under changing climatic conditions, varying from humid to arid or semi-arid. Aeolian deposits are preserved within the sand sheets showing characteristics of dominantly perennial flow punctuated by shorter periods of desiccation (Type II), while sand sheets showing features typical of arid and or semi-arid flow conditions (Type III) contain no preserved aeolian deposits. This selective preservation is interpreted to be a result of the combined effect of groundwater table level and fluvial style which in turn are inferred to have been controlled by the climatic regime. The deposits show that during pre-vegetational times the preservation of aeolian deposits, under certain conditions, may be more optimal in fluvial systems formed in a humid climate than in fluvial systems formed under semi-arid or arid circumstances. The occurrence of aeolian deposits within a Precambrian succession of fluvial deposits therefore, need not be an indication of the most arid environmental conditions.     

Stratigraphic evolution of a fluvial–eolian succession: The example of the Upper Jurassic—Lower Cretaceous Guará and Botucatu formations, Paraná Basin, Southernmost Brazil

The Guará and Botucatu formations comprise an 80 to 120 m thick continental succession that crops out on the western portion of the Rio Grande do Sul State (Southernmost Brazil). The Guará Formation (Upper Jurassic) displays a well-defined facies shift along its outcrop belt. On its northern portion it is characterised by coarse-grained to conglomeratic sandstones with trough and planar cross-bedding, as well as low-angle lamination, which are interpreted to represent braided river deposits. Southwards these fluvial facies thin out and interfinger with fine- to medium-grained sandstones with large-scale cross-stratification and horizontal lamination, interpreted as eolian dune and eolian sand sheets deposits, respectively. The Botucatu Formation is characterised by large-scale cross-strata formed by successive climbing of eolian dunes, without interdune and/or fluvial accumulation (dry eolian system). The contact between the Guará and the Botucatu formations is delineated by a basin-wide deflation surface (supersurface). The abrupt change in the depositional conditions that took place across this supersurface suggests a major climate change, from semi-arid (Upper Jurassic) to hyper-arid (Lower Cretaceous) conditions. A rearrangement of the Paraná Basin depocenters is contemporaneous to this climate change, which seems to have changed from a more restrict accumulation area in the Guará Formation to a wider sedimentary context in the Botucatu Formation.     

波—流相互作用机制与复合流的沉积构造鉴别标志*

波—流相互作用是复杂水动力条件下流体相互作用的主要方式之一,由波—流相互作用形成的复合流沉积是目前沉积学在流体相互作用这一领域研究较多的一种沉积类型。以已有的文献为基础,对波—流相互作用下细砂级颗粒的运动机制进行了综述,预测了波—流相互作用的沉积特征,总结了复合流的沉积构造鉴别标志。取得的主要认识有: (1)波—流相互作用总体上属于衰弱流(waning flow)悬浮沉积,其微观的沉积机制可分为5种: 越过崩落点的喷射沉积(S1)、残余涡动沉积(S2)、未到崩落点的喷射沉积(S3)、背流面的崩落沉积(S4)、垂直降落沉积(S5);(2)波—流相互作用的沉积过程总体上受悬砂量和沉积时间的控制,5种微观沉积机制在不同的悬砂量和沉积时间条件下可形成不同的沉积机制组合,从而导致不同的底床形态;(3)复合流沉积构造鉴别标志主要有: 复合流波痕、复合流层理、爬升型复合流层理、不对称丘状交错层理、准平行层理和频繁交替的不能充分发育的浪成波纹层理与流水层理等6类。上述认识对于复杂水动力条件下的沉积学研究及对深水、浅水沉积环境的识别均具有重要的意义。     

Controls on sedimentation in distal margin palaeovalleys in the Early Tertiary Alpine foreland basin, south-eastern France

The influence of palaeodrainage characteristics, palaeogeography and tectonic setting are rarely considered as controls on stratigraphic organization in palaeovalley or incised valley systems. This study is an examination of the influence of source region vs. downstream base level controls on the sedimentary architecture of a set of bedrock-confined palaeovalleys developed along the distal margin of the Alpine foreland basin in south-eastern France. Three distinct facies associations are observed within the palaeovalley fills. Fluvial facies association A is mainly dominated by poorly sorted, highly disorganized, clast-to-matrix-supported cobble-to-boulder conglomerates that are interpreted as streamflood deposits. Facies association B comprises mainly yellow siltstones and is interpreted as recording deposition in an estuarine basin environment. Estuarine marine facies association C comprises interstratified estuarine siltstones and clean, well-sorted washover sandstones. The sedimentary characteristics of the valley fill successions are related to the proximity of depositional sites to sediment source areas. Palaeovalleys located proximal to structurally controlled basement palaeohighs are entirely dominated by coarse fluvial streamflood deposits. In contrast, distal palaeovalley segments, which are located several kilometres downstream, contain successions showing upward transition from coarse fluvial facies into estuarine central basin fines, and finally into estuarine-marginal marine facies. Facies distributions suggest that the fluvial deposits form wedge-shaped, downstream-thinning sediment bodies, whereas the estuarine deposits form an upstream-thinning wedge. The vertical stacking of fluvial to estuarine to marginal marine depositional environments records the fluvial aggradation and subsequent transgression of relatively small bedrock-confined river valleys, which drained a rugged, upland terrain. Facies geometries suggest that a fluvial sediment wedge initially prograded downvalley, in response to high bed load sediment yields. Subsequently, palaeovalleys became drowned during the passage of a marine transgression, with the establishment of estuarine conditions. Initial fluvial aggradation and subsequent marine flooding of the palaeovalleys is a consequence of the interaction of high local rates of sediment supply and relative sea-level rise driven by flexural subsidence of the basin.     

藏南古错地区上侏罗统上部和下白垩统沉积相?

基于野外剖面和室内沉积学研究,对古错地区侏罗纪末期-早白垩世地层进行详细描述和修订,识别出6种主要岩相类型：红褐色（风化色）石英砾岩、灰色－黄绿色岩屑砾岩、灰白色石英砂岩、灰色－黄绿色岩屑砂岩、灰色－黄绿色长石岩屑砂岩、灰色、深灰色、黑色页岩。发现粒序层理、水平层理、平行层理、板状交错层理、丘状交错层理等层理构造、波痕和槽模层面构造、重荷模和砂岩岩墙变形构造以及侵蚀面构造、叠瓦状构造、硬底、结核等沉积构造和生物遗迹。识别出三角洲（包括三角洲前缘亚相和前三角洲亚相）和陆棚（包括受风暴影响的陆棚相亚相和深水陆棚相亚相）两类沉积相,其中三角洲前缘亚相进一步划分为水下分流河道、分流河口砂坝和远砂坝等微相。建立了侏罗纪末期-早白垩世沉积相序及其演化,并在此基础上分析了沉积环境变化。     

Aeolian stratification and facies association in desert sediments, Arran basin (Permian), Scotland

ABSTRACT Permian aeolian sediments on the island of Arran are divisible into dune (including draa) and interdune deposits. Both types display a distinctive and unusually wide variation in grain size. The dominant features of the dune deposits are grainfall lamination, sandflow lamination, and inverse graded lamination associated with ripple-form lamination and normal graded lamination. The flat-lying aeolian interdune deposits are characterised by granule and sand ripples, horizontal lamination in coarse sand and granules, plane bed lamination and inverse graded lamination. Associated structures include ripple-form lamination and deflation lags. Three types of trace fossil associated with completely bioturbated horizons occur in some low-angle dune and interdune deposits.
The aeolian facies interfinger with alluvial fan deposits giving rise to three recognizable facies belts. Marginal aeolian deposits are associated with fluvial conglomerates and are dominated by interdune deposits and occasionally very thin barchan deposits (set height 3-37 cm). Intermediate aeolian deposits are characterized by interbedded crescentic dune, small draa (dune set height 5 cm-4.5 m) and interdune deposits, and rare fluvial and lake sediments. Basinal aeolian deposits are dominated by draa deposits (dune set height 0.2-28 m) associated with rare interdune sediments. Transverse dunes and draas were moved by north-eastern palaeowinds towards the foot of the alluvial fans. The aeolian sediments were deposited in a fault-bounded desert basin.     

宣化地区古老的潮汐沉积

大约在十八亿年前左右,在经过长期风化剥蚀后基本上处于准平原状态的华北地台上,沿着北东向的几条基底断裂,形成一个沿朝阳、蓟县、石家庄、长治一线展布的北东向长形断陷沉积盆地。初期,可能仅在局部地区(如蓟县附近)沉积河流相砂砾岩。     

Wavy lamination in a mixed sand and gravel foreshore facies of the Pleistocene Hosoya Sandstone, Aichi, central Japan

Although sandy foreshore facies are generally characterized by parallel lamination, wavy lamination is predominant in the mixed sand and gravel foreshore facies of the Pleistocene Hosoya Sandstone, which crops out along the Pacific coast of the Atsumi Peninsula, Aichi, central Japan. The foreshore facies consists of three sedimentary subfacies; interbeds of gravel and parallel laminated sand of the lower foreshore facies, parallel laminated fine to medium sand beds containing scattered pebbles and cobbles of the middle foreshore facies, and wavy laminated fine to medium sand beds containing scattered pebbles and cobbles of the upper foreshore facies. A lack of erosional surfaces in the middle foreshore facies indicates the continuous accumulation of sand in flat beds under upper plane bed flow. The wavy laminated sands of the upper foreshore facies exhibit erosional surfaces indicative of repeated deposition and erosion. The erosional surfaces are undulatory, with depressions (10 cm wide and 3 cm deep) that contain scattered pebbles and cobbles. These depressions reflect backwash erosion of sand around and below the pebbles and cobbles. Sand draping over the undulating erosional surfaces forms the wavy lamination. The wavy laminated sand with scattered pebbles and cobbles is a key facies of an upper foreshore or swash zone, and is a good sea-level marker.     

Facies and architectural element analysis of a meandering fluvial succession: The Permian Warchha Sandstone, Salt Range, Pakistan

The 30 to 155 m thick Early Permian (Artinskian) Warchha Sandstone of the Salt Range, Pakistan is a conglomerate, sandstone and claystone succession within which seven lithofacies types (Gt, St, Sp, Sr, Sh, Fl and Fm) occur in a predictable order as repeated fining-upward cycles. Common sedimentary structures in the conglomerates and sandstones include planar and trough cross-bedding, planar lamination, soft sediment-deformed bedding, compound cosets of strata with low-angle inclined bounding surfaces and lags of imbricated pebbles. Structures in the finer-grained facies include desiccation cracks, raindrop imprints, caliche nodules and bioturbation. Groups of associated facies are arranged into nine distinct architectural elements (channels, gravel bars, sandy bedforms, downstream and laterally accreting barforms, sand sheets, crevasse splays, levees, floodplain units and shallow lakes), which is consistent with a fluvial origin for the succession. The types of architectural elements present and their relationship to each other demonstrate that the Warchha Sandstone preserves a record of a meandering river system that drained the northern margin of Gondwanaland. The dominance of fine-grained (floodplain) facies over gravel-grade (channel-base) facies and the widespread occurrence of large-scale lateral accretion elements supports the interpretation of a high-sinuosity, meandering fluvial system in which channel bodies accumulated via the lateral accretion of point bars but in which the active channels covered only a small part of a broad floodplain at any time instant. Although the regional and temporal distribution of these deposits is complex, in broad terms the lower part is dominated by stacked, multistorey channel bodies, whereas single-storey channel elements isolated in abundant fine-grained floodplain deposits dominate the middle and upper parts of the formation.     

Caledonide influences on the Old Red Sandstone fluvial systems of the Oslo Region,Norway

Red or buff‐coloured sandstones and siltstones of fluvial origin comprise approximately 80% of the Ringerike Group, a late Silurian Old Red Sandstone (ORS) sequence that crops out extensively in the Oslo Region of southern Norway. These fluvial sediments are lithostratigraphically ascribed to two laterally equivalent formations—the Stubdal Formation (to the north of Oslo) and the Skien Formation (to the south of Oslo). The fluvial strata of each of the two formations have a distinct style of sandbody geometry, facies, provenance, and palaeocurrent direction. Within the Stubdal Formation, shallow channelized sandbodies, low‐ to upper‐flow regime sedimentary structures, a Caledonide provenance and a palaeoflow toward the southeast are evident. Within the Skien Formation, sandbody geometry is entirely sheet form, with upper‐flow regime sedimentary structures, a provenance from Precambrian rocks to the northern and local parts of the Oslo Region and a palaeoflow toward the east. No stratal contact can be seen between the two fluvial formations, due to a 15 km break in exposure between the southernmost Stubdal Formation and the northernmost Skien Formation. Relationships with adjacent formations indicate that they are diachronous, lateral equivalents. Given the abrupt change in sedimentary style between the two formations, it is proposed that a barrier had developed within the foreland basin, diverting the ORS fluvial systems in southern Norway, from a southward (north of Oslo), to an eastward direction (south of Oslo). This diversion had implications for depositional gradient, fluvial regime and provenance, resulting in the differences visible in the deposits of those rivers. The barrier invoked is arguably a Caledonide blind thrust fault that developed a topographic high, running east–west through the vicinity of Oslo, during the late Silurian. Copyright © 2004 John Wiley & Sons, Ltd.     

Current‐aligned dewatering sheets and ‘enhanced’ primary current lineation in turbidite sandstones of the Marnoso‐arenacea Formation

Turbidite sandstones of the Miocene Marnoso‐arenacea Formation (northern Apennines, Italy) display centimetre to decimetre long, straight to gently curved, 0·5 to 2·0 cm regularly spaced lineations on depositional (stratification) planes. Sometimes these lineations are the planform expression of sheet structures seen as millimetre to centimetre long vertical ‘pillars’ in profile. Both occur in the middle and upper parts of medium‐grained and fine‐grained sandstone beds composed of crude to well‐defined stratified facies (including corrugated, hummocky‐like, convolute, dish‐structured and dune stratification) and are aligned sub‐parallel to palaeoflow direction as determined from sole marks often in the same beds. Outcrops lack a tectonic‐related fabric and therefore these structures may be confidently interpreted to be sedimentary in origin. Lineations resemble primary current lineations formed by the action of turbulence during bedload transport under upper stage plane bed conditions. However, they typically display a larger spacing and micro‐topography compared to classic primary current lineations and are not associated with planar‐parallel, finely laminated sandstones. This type of ‘enhanced lineation’ is interpreted to develop by the same process as primary current lineations, but under relatively high near‐bed sediment concentrations and suspended load fallout rates, as supported by laboratory experiments and host facies characteristics. Sheets are interpreted to be dewatering structures and their alignment to palaeoflow (only noted in several other outcrops previously) inferred to be a function of vertical water‐escape following the primary depositional grain fabric. For the Marnoso‐arenacea beds, sheet orientation may be linked genetically to the enhanced primary current lineation structures. Current‐aligned lineation and sheet structures can be used as palaeoflow indicators, although the directional significance of sheets needs to be independently confirmed. These indicators also aid the interpretation of dewatered sandstones, suggesting sedimentation under a traction‐dominated depositional flow – with a discrete interface between the aggrading deposit and the flow – as opposed to under higher concentration grain or hindered‐settling dominated regimes.     

The sedimentology of an ephemeral fluvial–aeolian succession

Ephemeral fluvial systems are commonly associated with arid to semi-arid climates. Although their complex sedimentology and depositional settings have been described in much detail, depositional models depicting detailed lateral and vertical relationships, and interactions with coeval depositional environments, are lacking compared to well-recognized meandering and braided fluvial systems. This study critically evaluates the applicability of current models for ephemeral fluvial systems to an ancient arid fluvial example of the Lower Jurassic Kayenta Formation of the Colorado Plateau, USA. The study employs detailed sedimentary logging, palaeocurrent analysis and photogrammetric panels across the regional extent of the Kayenta. A generic model that accounts for the detailed sedimentology of a sandy arid ephemeral fluvial system (drawing upon both ancient and geomorphological studies) is developed, along with analysis of the spatial and temporal interactions with the aeolian setting. Results show that the ephemeral system is dominated by laterally and vertically amalgamated, poorly channelized to sheet-like elements, with abundant upper flow regime flat beds and high sediment load structures formed between periods of lower flow regime conditions. Through interaction with a coeval aeolian system, most of the fluvial deposits are dominated by sand-grade sediment, unlike many modern ephemeral fluvial systems that contain a high proportion of conglomeratic and/or finer grained mudstone and siltstone deposits. During dominantly fluvial deposition, high width to thickness ratios are observed for channelized and sheet-like elements. However, with increasing aridity, the aeolian environment becomes dominant and fluvial deposition is restricted to interdune corridors, resulting in lower width to thickness ratio channels dominated by flash-flood and debris-flow facies. The data presented here, coupled with modern examples of ephemeral systems and flood regimes, suggest that ephemeral flow produces and preserves distinctive sedimentological traits that can not only be recognized in outcrops, but also within core.     

Anatomy and facies distribution of terminal lobes in ephemeral fluvial successions: Jurassic Tordillo Formation,Neuquén Basin,Argentina

In terminal fluvial-fan systems, characteristic proximal to distal variations in sedimentary architectures are recognized to arise from progressive downstream loss of water discharge related to both infiltration and evaporation. This work aims to elucidate downstream trends in facies and architecture across the medial and distal zones of terminal-fan systems, which record transitions from deposits of channel elements to lobe-like and sheet-like elements. This is achieved via a detailed characterization of ancient ephemeral fluvial deposits of the well-exposed Kimmeridgian Tordillo Formation (Neuquén Basin, Argentina). The fine sand-prone and silt-prone succession associated with the medial to distal sectors of the system has been studied to understand relationships between depositional processes and resulting architectures. Facies and architectural-element analyses, and quantification of resulting sedimentological data at multiple scales, have been undertaken to characterize sedimentary facies, facies transitions, bed types, architectural elements and larger-scale architectural styles. Eight bed types with distinct internal facies transitions are defined and interpreted in terms of different types of flood events. Channelized and non-channelized architectural elements are defined based on their constituent bed types and their external geometry. The most common elements are terminal lobes, which are composite bodies within which largely unconfined sandy deposits are stacked in a compensational manner; a hierarchical arrangement of internal components is recognized. Proximal feeder-channel avulsion events likely controlled the evolution of terminal-lobe elements and their spatiotemporal shifts. Stratigraphic relations between architectural elements record system-wide trends, whereby a proximal sector dominated by channel elements passes downstream via a gradational transition to a medial sector dominated by sandy terminal-lobe elements, which in turn passes further downstream to a distal sector dominated by silty terminal lobe-margin and fringing deposits. This work enhances current understanding of the stratigraphic record of terminal fluvial systems at multiple scales, and provides insight that can be applied to predict the facies and architectural complexity of terminal fluvial successions.     

Deep-water Combined-flow Deposits of the Upper Ordovician Lashenzhong Formation in Zhuozishan Area,Western Margin of Ordos Basin

The research of deep-water combined-flow deposits is still in its infancy at present, which has great significance for discovering new case study and discussing the indication effects of combined-flow sedimentary structures on depositional environment. The Upper Ordovician Lashenzhong Formation in Zhuozishan area, Inner Mongolia, in the north of western Ordos Basin, is mainly deposited by turbidity currents concomitant with contour currents as well as internal-waves and internal-tides in deep-water slope and basin floor environment which display typical complex hydrodynamic conditions. Here we studied the deep-water combined-flow sedimentary structures of Lashenzhong Formation in detail based on careful field work, combined with the results of flume experiments and other related case studies in literatures. Several combined-flow sedimentary structures were found in deep-water environment, which include combined-flow-ripple lamination, quasi-planar lamination and small-scale hummocky cross-stratification-like structures. These sedimentary structures can be summarized vertically as 6 sedimentary structure successions: normal graded layer through wave-ripple lamination to combined-flow-ripple lamination (a), quasi-planar lamination through normal graded layer to combined- flow-ripple lamination (b), amphibolous normal graded layer overlaying by quasi-planar lamination (c), quasi-planar lamination through bi-directional cross-lamination to small-scale hummocky cross-stratification-like structures (d), amalgamated small-scale hummocky cross-stratification-like structures enveloped claystone (e) and combined- flow-ripple lamination enveloped claystone (f). The origin of deep-water combined-flow deposits perhaps is the interactions of turbidity currents, contour currents and internal-wave currents according to the sedimentary types and environment in Lashenzhong Formation. Based on the interactions between sedimentary currents and sea floor topography, four sedimentation zones were suggested: turbidity currents restrained zone (succession a and b), strong interaction zone (succession c), internal-wave action zone (succession d) and weak interaction zone (succession e and f). This study will be helpful for the study of interactions of internal-waves and internal-tides with sea floor topography, and related sedimentation zone division in geological records.     

超临界浊流之地貌动力学和沉积特征

超临界流在现代沉积环境中几乎无处不在,但相关沉积物却极少从地层记录中被辨识出来,这是当前沉积学研究所面临的一个困境,文中称之为“超临界流沉积问题”。按弗劳德数增大顺序,超临界流可依次形成稳定逆行沙丘、不稳定逆行沙丘、急滩—深潭及周期阶坎等底形,相应的地貌动力学也从同相位体制(逆行沙丘)逐渐过渡为水跃体制(急滩—深潭和周期阶坎)。相对于明渠流,浊流因折算密度低而更易成为超临界流。超临界浊流底形的长波长、低幅度、逆流(坡)迁移特性,决定了其沉积物发育特征的后积层理、近平行—低角度交错层理、与水跃有关的快速堆积及冲刷—充填和建造—充填构造。超临界浊流沉积可以通过沉积体的几何形态(包括波长/波高比、平面和剖面形态等)和内部沉积特征(包括波脊逆坡迁移、沉积构造、粒度变化趋势及沉积相组合等)的综合分析加以鉴别。露头、岩心分析与高分辨率地震、浅剖、多波束测深等地球物理资料的综合,是准确鉴别超临界浊流沉积单元的重要途径。本文对超临界浊流地貌动力学研究进展进行综述,并对地层记录中超临界浊流沉积的鉴别标志及相关问题进行探讨。     

Architecture and preservation in the fluvial to marine transition zone of a mixed-process humid-tropical delta: Middle Miocene Lambir Formation,Baram Delta Province,north-west Borneo

The interaction of river and marine processes in the fluvial to marine transition zone fundamentally impacts delta plain morphology and sedimentary dynamics. This study aims to improve existing models of the facies distribution, stratigraphic architecture and preservation in the fluvial to marine transition zone of mixed-process deltas, using a comprehensive sedimentological and stratigraphic dataset from the Middle Miocene Lambir Formation, Baram Delta Province, north-west Borneo. Eleven facies associations are identified and interpreted to preserve the interaction of fluvial and marine processes in a mixed-energy delta, where fluvial, wave and tidal processes display spatially and temporally variable interactions. Stratigraphic successions in axial areas associated with active distributary channels are sandstone-rich, comprising fluvial-dominated and wave-dominated units. Successions in lateral areas, which lack active distributary channels, are mudstone-rich, comprising fluvial-dominated, tide-dominated and wave-dominated units, including mangrove swamps. Widespread mudstone preservation in axial and lateral areas suggests well-developed turbidity maximum zones, a consequence of high suspended-sediment concentrations resulting from tropical weathering of a mudstone-rich hinterland. Within the fluvial to marine transition zone of distributary channels, interpreted proximal–distal sedimentological and stratigraphic trends suggest: (i) a proximal fluvial-dominated, tide-influenced subzone; (ii) a distal fluvial-dominated to wave-dominated subzone; and (iii) a conspicuously absent tide-dominated subzone. Lateral areas preserve a more diverse spectrum of facies and stratigraphic elements reflecting combined storm, tidal and subordinate river processes. During coupled storm and river floods, fluvial processes dominated the fluvial to marine transition zone along major and minor distributary channels and channel mouths, causing significant overprinting of preceding interflood deposits. Despite interpreted fluvial–tidal channel units and mangrove influence implying tidal processes, there is a paucity of unequivocal tidal indicators (for example, cyclical heterolithic layering). This suggests that process preservation in the fluvial to marine transition zone preserved in the Lambir Formation primarily records episodic (flashy) river discharge, river flood and storm overprinting of tidal processes, and possible backwater dynamics.     

Hummocky cross-stratification-like structures in deep-sea turbidites: Upper Cretaceous Basque basins (Western Pyrenees, France)

Hummocky cross-stratification is a sedimentary structure which is widely interpreted as the sedimentary record of an oscillatory current generated by energetic storm waves remobilizing surface sediment on the continental shelf. Sedimentary structures named hummocky cross-stratification-like structures, similar to true hummocky cross-stratification, have been observed in the Turonian–Senonian Basque Flysch Basin (south-west France). The bathymetry (1000 to 1500 m) suggests that the observed sedimentary structures do not result from a hydrodynamic process similar to those acting on a continental shelf. The morphology of these three-dimensional structures shares similarities with the morphology of hummocky cross-stratification despite a smaller size. The lateral extent of these structures ranges from a few decimetres to many decimetres; they consist of convex-up domes (hummock) and concave-up swales with a non-erosive base. Four types of hummocky cross-stratification-like geometries are described; they occur in association with structures such as climbing current ripple lamination and synsedimentary deformations. In the Basque Flysch, hummocky cross-stratification-like structures are only found in the Tc interval of the Bouma sequence. Hummocky cross-stratification-like structures are sporadic in the stratigraphic series and observed only in few turbidite beds or bed packages. This observation suggests that hummocky cross-stratification-like structures are linked genetically to the turbidity current but form under a very restricted range of parameters. These structures sometimes show an up-current (upslope) migration trend (antidunes). In the described examples, they could result from standing waves forming at the upper flow interface because of Kelvin–Helmholtz instability.