High-resolution seismic characterization of the gas and gas hydrate system at Green Canyon 955, Gulf of Mexico,USA

The Pliocene and Pleistocene sediments at lease block Green Canyon 955 (GC955) in the Gulf of Mexico include sand-rich strata with high saturations of gas hydrate; these gas hydrate accumulations and the associated geology have been characterized over the past decade using conventional industry three-dimensional (3D) seismic data and dedicated logging-while-drilling (LWD) borehole data. To improve structural and stratigraphic characterization and to address questions of gas flow and reservoir properties, in 2013 the U.S. Geological Survey acquired high-resolution two-dimensional (2D) seismic data at GC955. Combined analysis of all available data improves our understanding of the geological evolution of the study area, which includes basin-scale migration of the Mississippi River sediment influx as well as local-scale shifting of sedimentary channels at GC955 in response to salt-driven uplift, structural deformation associated with the salt uplift, and upward gas migration from deeper sediments that charges the main gas hydrate reservoir and shallower strata. The 2D data confirm that the sand-rich reservoir is composed principally of sediments deposited in a proximal levee setting and that episodes of channel scour, interspersed with levee deposition, have resulted in an assemblage of many individual proximal levee deposit “pods” each with horizontal extent up to several hundred meters. Joint analysis of the 2D and 3D data reveals new detail of a complex fault network that controls the fluid-flow system; large east-west trending normal faults allow fluid flow through the reservoir-sealing fine-grained unit, and smaller north-south oriented faults provide focused fluid-flow pathways (chimneys) through the shallower sediments. This system has enabled the flow of gas from the main reservoir to the seafloor throughout the recent history at GC955, and its intricacies help explain the distributed occurrences of gas hydrate in the intervening strata.     

Pore- and fracture-filling gas hydrate reservoirs in the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II Green Canyon 955 H well

High-quality logging-while-drilling (LWD) downhole logs were acquired in seven wells drilled during the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II in the spring of 2009. Well logs obtained in one of the wells, the Green Canyon Block 955 H well (GC955-H), indicate that a 27.4-m thick zone at the depth of 428 m below sea floor (mbsf; 1404 feet below sea floor (fbsf)) contains gas hydrate within sand with average gas hydrate saturations estimated at 60% from the compressional-wave (P-wave) velocity and 65% (locally more than 80%) from resistivity logs if the gas hydrate is assumed to be uniformly distributed in this mostly sand-rich section. Similar analysis, however, of log data from a shallow clay-rich interval between 183 and 366 mbsf (600 and 1200 fbsf) yielded average gas hydrate saturations of about 20% from the resistivity log (locally 50−60%) and negligible amounts of gas hydrate from the P-wave velocity logs. Differences in saturations estimated between resistivity and P-wave velocities within the upper clay-rich interval are caused by the nature of the gas hydrate occurrences. In the case of the shallow clay-rich interval, gas hydrate fills vertical (or high angle) fractures in rather than filling pore space in sands. In this study, isotropic and anisotropic resistivity and velocity models are used to analyze the occurrence of gas hydrate within both the clay-rich and sand dominated gas-hydrate-bearing reservoirs in the GC955-H well.     

Rock physics-based seismic trace analysis of unconsolidated sediments containing gas hydrate and free gas in Green Canyon 955, Northern Gulf of Mexico

The gas hydrate petroleum system at the 2009 Gulf of Mexico Gas Hydrate Joint Industry Project Leg II (JIP Leg II) Green Canyon 955 (GC955) site shows a complex seismic amplitude and waveform response of highly negative and positive amplitudes with continuous and discontinuous character within inferred gas-hydrate- and gas-bearing sand reservoirs. Logging-while-drilling (LWD) data obtained during JIP Leg II and conventional 3-D seismic data allowed for the identification of thick highly concentrated hydrate layers by integrating rock physics modeling, amplitude and thin layer analysis, and spectral decomposition. Rock physics modeling with constraints from three JIP LWD holes allowed for the analysis of variations in acoustic amplitude characteristics as a product of hydrate saturation, gas saturation, and reservoir thickness. Using the well log-derived acoustic models, thick highly concentrated gas hydrate with and without underlying free gas accumulations have been identified. These results suggest that thick highly concentrated gas-hydrate-bearing sand units (with thicknesses greater than half of the seismic tuning thickness and gas hydrate saturations greater than 50%) underlain by gas can be differentiated from sands containing only gas, but thin gas-hydrate-bearing sand units with low gas hydrate concentrations (with thicknesses less than half of the seismic tuning thickness and gas hydrate saturations less than 50%) are difficult to identify from post-stack seismic amplitude data alone. Within GC955, we have identified six zones with seismic amplitude anomalies interpreted as being caused by gas hydrate deposits with variable lateral extent, thickness and saturation, and in some cases overlying free-gas-bearing intervals. Synthetic seismic images produced from well-log- and model-derived velocity and density distributions mimic similar reflection characteristics in the corresponding field seismic data.     

Numerical studies of methane production from Class 1 gas hydrate accumulations enhanced with carbon dioxide injection

Class 1 gas hydrate accumulations are characterized by a permeable hydrate-bearing interval overlying a permeable interval with mobile gas, sandwiched between two impermeable intervals. Depressurization-induced dissociation is currently the favored technology for producing gas from Class 1 gas hydrate accumulations. The depressurization production technology requires heat transfer from the surrounding environment to sustain dissociation as the temperature drops toward the hydrate equilibrium point and leaves the reservoir void of gas hydrate. Production of gas hydrate accumulations by exchanging carbon dioxide with methane in the clathrate structure has been demonstrated in laboratory experiments and proposed as a field-scale technology. The carbon dioxide exchange technology has the potential for yielding higher production rates and mechanically stabilizing the reservoir by maintaining hydrate saturations. We used numerical simulation to investigate the advantages and disadvantages of using carbon dioxide injection to enhance the production of methane from Class 1 gas hydrate accumulations. Numerical simulations in this study were primarily concerned with the mechanisms and approaches of carbon dioxide injection to investigate whether methane production could be enhanced through this approach. To avoid excessive simulation execution times, a five-spot well pattern with a 500-m well spacing was approximated using a two-dimensional domain having well boundaries on the vertical sides and impermeable boundaries on the horizontal sides. Impermeable over- and under burden were included to account for heat transfer into the production interval. Simulation results indicate that low injection pressures can be used to reduce secondary hydrate formation and that direct contact of injected carbon dioxide with the methane hydrate present in the formation is limited due to bypass through the higher permeability gas zone.     

印度克里希纳-戈达瓦里盆地天然气水合物饱和度特征

印度国家天然气水合物计划(NGHP01)于2016年实施第1次钻探,证实了天然气水合物在印度大陆边缘的广泛分布。选择位于克里希纳-戈达瓦里盆地(KG盆地)的NGHP01-07D和NGHP01-15A钻孔,基于测井数据和岩心样品估算天然气水合物饱和度,分析天然气水合物赋存状态并探讨其形成机制。基于各向同性介质模型利用电阻率和声波测井计算NGHP01-15A钻孔的天然气水合物饱和度为0. 2%～33. 0%,平均值为9. 6%,在NGHP01-07D钻孔利用电阻率计算获得的天然气水合物饱和度高于岩心氯离子异常和气体释放获得的结果,但是基于各向同性岩石物理模型利用声波测井计算的天然气水合物饱和度与岩心结果一致,平均值为5. 0%。前人研究认为NGHP01-10D钻孔中天然气水合物以相对较高饱和度富集在高角度裂隙中。结合前人研究结果推断在克里希纳-戈达瓦里盆地存在3种不同的天然气水合物储层,即泥岩中砂质夹层各向同性储层、泥质/粉砂质高角度低连通性的低饱和度裂隙储层和泥岩中高角度高连通性的高饱和度裂隙储层,并提出对应的3种天然气水合物储层模型。     

Geologic controls on gas hydrate occurrence in the Mount Elbert prospect, Alaska North Slope

Data acquired at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well, drilled in the Milne Point area of the Alaska North Slope in February, 2007, indicates two zones of high gas hydrate saturation within the Eocene Sagavanirktok Formation. Gas hydrate is observed in two separate sand reservoirs (the D and C units), in the stratigraphically highest portions of those sands, and is not detected in non-sand lithologies. In the younger D unit, gas hydrate appears to fill much of the available reservoir space at the top of the unit. The degree of vertical fill with the D unit is closely related to the unit reservoir quality. A thick, low-permeability clay-dominated unit serves as an upper seal, whereas a subtle transition to more clay-rich, and interbedded sand, silt, and clay units is associated with the base of gas hydrate occurrence. In the underlying C unit, the reservoir is similarly capped by a clay-dominated section, with gas hydrate filling the relatively lower-quality sands at the top of the unit leaving an underlying thick section of high-reservoir quality sands devoid of gas hydrate. Evaluation of well log, core, and seismic data indicate that the gas hydrate occurs within complex combination stratigraphic/structural traps. Structural trapping is provided by a four-way fold closure augmented by a large western bounding fault. Lithologic variation is also a likely strong control on lateral extent of the reservoirs, particularly in the D unit accumulation, where gas hydrate appears to extend beyond the limits of the structural closure. Porous and permeable zones within the C unit sand are only partially charged due most likely to limited structural trapping in the reservoir lithofacies during the period of primary charging. The occurrence of the gas hydrate within the sands in the upper portions of both the C and D units and along the crest of the fold is consistent with an interpretation that these deposits are converted free gas accumulations formed prior to the imposition of gas hydrate stability conditions.     

Scale-dependent gas hydrate saturation estimates in sand reservoirs in the Ulleung Basin,East Sea of Korea

Through the use of 2-D and 3-D seismic data, several gas hydrate prospects were identified in the Ulleung Basin, East Sea of Korea and thirteen drill sites were established and logging-while-drilling (LWD) data were acquired from each site in 2010. Sites UBGH2–6 and UBGH2–10 were selected to test a series of high amplitude seismic reflections, possibly from sand reservoirs. LWD logs from the UBGH2–6 well indicate that there are three significant sand reservoirs with varying thickness. Two upper sand reservoirs are water saturated and the lower thinly bedded sand reservoir contains gas hydrate with an average saturation of 13%, as estimated from the P-wave velocity. The well logs at the UBGH2–6 well clearly demonstrated the effect of scale-dependency on gas hydrate saturation estimates. Gas hydrate saturations estimated from the high resolution LWD acquired ring resistivity (vertical resolution of about 5–8 cm) reaches about 90% with an average saturation of 28%, whereas gas hydrate saturations estimated from the low resolution A40L resistivity (vertical resolution of about 120 cm) reaches about 25% with an average saturation of 11%. However, in the UBGH2–10 well, gas hydrate occupies a 5-m thick sand reservoir near 135 mbsf with a maximum saturation of about 60%. In the UBGH2–10 well, the average and a maximum saturation estimated from various well logging tools are comparable, because the bed thickness is larger than the vertical resolution of the various logging tools. High resolution wireline log data further document the role of scale-dependency on gas hydrate calculations.     

Rock physics modeling for assessing gas hydrate and free gas: a case study in the Cascadia accretionary prism

We investigate the estimation of gas hydrate and free gas concentration using various rock physics models in the Cascadia accretionary prism, which is one of the most intensively studied regions of natural gas hydrate occurrences. Surface seismic reflection data is the most useful and cost-effective in deriving seismic velocity, and hence estimating gas hydrate and free gas across a BSR with depth, if a proper background (without gas hydrate and free gas) velocity is chosen. We have used effective medium theory of Helgerud et al. (EMTH) and, a combination of self-consistent approximation and differential effective medium (SCA-DEM) theory coupled with smoothing approximation for crystalline aggregate. Using the SCA-DEM (non-load-bearing) and EMTH (load-bearing) modeling, we calculate the average saturations of gas hydrate as 17 and 19%, respectively within ~100 m thick sedimentary column using velocity, derived from the surface seismic data. The saturations of gas hydrate are estimated as 15 and 18% using the SCA-DEM, and 20 and 25% using EMTH from the logging-while-drilling and wire-line sonic velocities, respectively. Estimations of gas hydrate from Poisson’s ratio are in average 50% for EMTH and 10% for SCA-DEM theory. We obtain the maximum saturation of free gas as 1–2% by employing the SCA-DEM theory either to seismic or sonic velocities, whereas the free-gas saturation varies between 0.1 and 0.4% for EMTH model. The gas hydrate saturation estimated from the sonic velocity and the free gas saturation derived from both the seismic and sonic velocities using the SCA-DEM modeling match quite well with those determined from the pressure core data in the study region.     

Pre- and post-drill comparison of the Mount Elbert gas hydrate prospect, Alaska North Slope

In 2006, the United States Geological Survey (USGS) completed a detailed analysis and interpretation of available 2-D and 3-D seismic data, along with seismic modeling and correlation with specially processed downhole well log data for identifying potential gas hydrate accumulations on the North Slope of Alaska. A methodology was developed for identifying sub-permafrost gas hydrate prospects within the gas hydrate stability zone in the Milne Point area. The study revealed a total of 14 gas hydrate prospects in this area.In order to validate the gas hydrate prospecting protocol of the USGS and to acquire critical reservoir data needed to develop a longer-term production testing program, a stratigraphic test well was drilled at the Mount Elbert prospect in the Milne Point area in early 2007. The drilling confirmed the presence of two prominent gas-hydrate-bearing units in the Mount Elbert prospect, and high quality well logs and core data were acquired. The post-drill results indicate pre-drill predictions of the reservoir thickness and the gas-hydrate saturations based on seismic and existing well data were 90% accurate for the upper unit (hydrate unit D) and 70% accurate for the lower unit (hydrate unit C), confirming the validity of the USGS approach to gas hydrate prospecting. The Mount Elbert prospect is the first gas hydrate accumulation on the North Slope of Alaska identified primarily on the basis of seismic attribute analysis and specially processed downhole log data. Post-drill well log data enabled a better constraint of the elastic model and the development of an improved approach to the gas hydrate prospecting using seismic attributes.     

In-situ gas hydrate hydrate saturation estimated from various well logs at the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

In 2006, the U.S. Geological Survey (USGS) completed detailed analysis and interpretation of available 2-D and 3-D seismic data and proposed a viable method for identifying sub-permafrost gas hydrate prospects within the gas hydrate stability zone in the Milne Point area of northern Alaska. To validate the predictions of the USGS and to acquire critical reservoir data needed to develop a long-term production testing program, a well was drilled at the Mount Elbert prospect in February, 2007. Numerous well log data and cores were acquired to estimate in-situ gas hydrate saturations and reservoir properties.Gas hydrate saturations were estimated from various well logs such as nuclear magnetic resonance (NMR), P- and S-wave velocity, and electrical resistivity logs along with pore-water salinity. Gas hydrate saturations from the NMR log agree well with those estimated from P- and S-wave velocity data. Because of the low salinity of the connate water and the low formation temperature, the resistivity of connate water is comparable to that of shale. Therefore, the effect of clay should be accounted for to accurately estimate gas hydrate saturations from the resistivity data. Two highly gas hydrate-saturated intervals are identified - an upper ∼43 ft zone with an average gas hydrate saturation of 54% and a lower ∼53 ft zone with an average gas hydrate saturation of 50%; both zones reach a maximum of about 75% saturation.     

Controlled-source marine electromagnetic 2-D modeling gas hydrate studies

Research on gas hydrate has increased recently as an alternative to fossil fuel. This study of marine controlled source electromagnetics (CSEM) is motivated by this increase, particularly in deep waters, and examines representative models. We present 2D models and test their efficacy in detection and characterization of gas hydrates. Earlier modeling studies used a horizontal transmitter to study the CSEM response??two electrical and one magnetic component??for resistive subsurface layers. Here we use six components??three electrical and three magnetic??and show that the proposed method reduces ambiguity in interpretation. Additionally, we show results utilizing the transmitter dipole in a borehole and receivers at the sea bottom. We found that CSEM response from a vertical transmitter helps us characterize resistive layers more confidently than from a transmitter moving horizontally at sea bottom. We conclude that in a complex environment, combining horizontal and vertical movements of the transmitter with sea-bottom receivers helps us delineate the subsurface structure more clearly and may help reduce drilling costs. Our models closely match the gas hydrate region in the Gulf of Mexico??Walker Ridge Block-313. Although this study examines gas hydrate, the methodology is applicable to other areas??for example, in monitoring gas diffusion at subsurface depths, which may help in CO₂ sequestration.     

Estimation of seismic velocities and gas hydrate concentrations: A case study from the Shenhu area,northern South China Sea

In the Shenhu area of the northern South China Sea (SCS), canyon systems and focused fluid flow systems increase the complexity of the gas hydrate distribution in the region. It also induces difficulties in predicting the hydrate reservoir characteristics and quantitatively evaluating reservoir parameters. In this study, several inversion methods have been executed to estimate the velocities of strata and gas hydrate concentrations along a profile in the Shenhu area. The seismic data were inverted to obtain the reflection coefficient of each stratum via a spectral inversion method. Stratigraphic horizons were then delineated by tracking the inverted reflectivities. Based on the results of spectral inversion, a low-frequency velocity field of the strata was constructed for acoustic impedance inversion. Using a new iterative algorithm for acoustic impedance inversion, reflection coefficients were converted into velocities, and the velocity variations of the strata along a 2D seismic line were then obtained. Subsequently, gas hydrate saturations at well SH2 were estimated via the shale-corrected resistivity method, the chloride ion concentration method and three different rock physics models. The results were then compared to determine the optimal rock physics model, and the modified Wood equation (MWE) was found to be appropriate for this area. Finally, the inverted velocities and MWE were used to predict the distribution and concentrations of gas hydrates along the seismic line. The estimated spatial distribution of gas hydrates is consistent with that from sonic logging and resistivity data at well SH2, and with the drilling results. Therefore, this method is applicable in areas with no well data, or with few wells, and provides an effective tool for predicting and evaluating gas hydrates using seismic data.     

Gas production from a cold, stratigraphically-bounded gas hydrate deposit at the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Implications of uncertainties

As part of an effort to identify suitable targets for a planned long-term field test, we investigate by means of numerical simulation the gas production potential from unit D, a stratigraphically bounded (Class 3) permafrost-associated hydrate occurrence penetrated in the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well on North Slope, Alaska. This shallow, low-pressure deposit has high porosities (? = 0.4), high intrinsic permeabilities (k = 10⁻¹² m²) and high hydrate saturations (S_H = 0.65). It has a low temperature (T = 2.3-2.6 °C) because of its proximity to the overlying permafrost. The simulation results indicate that vertical wells operating at a constant bottomhole pressure would produce at very low rates for a very long period. Horizontal wells increase gas production by almost two orders of magnitude, but production remains low. Sensitivity analysis indicates that the initial deposit temperature is by the far the most important factor determining production performance (and the most effective criterion for target selection) because it controls the sensible heat available to fuel dissociation. Thus, a 1 °C increase in temperature is sufficient to increase the production rate by a factor of almost 8. Production also increases with a decreasing hydrate saturation (because of a larger effective permeability for a given k), and is favored (to a lesser extent) by anisotropy.     

Preliminary assessment of resources and economic potential of individual gas hydrate accumulations in the Gulf of Mexico continental slope

Some global estimates suggest that gas hydrates represent the largest reservoir of fossil fuel. However, only a few studies of the resource and economic potential of individual gas hydrate accumulations exist. Here we estimate the volume of hydrate-bound gas at GC (Green Canyon) blocks 184/185, GC 234/235, GB (Garden Banks) 388, MC (Mississippi Canyon) 798/842, GC 204, MC 852/853, and AT (Atwater Valley) 425/426 sites in the Gulf of Mexico at water depths ∼500–2000 m. The structural accumulations may contain from 4.7×10⁸ to 1.3×10¹¹ m³ of gas at standard temperature and pressure. The resources in individual gas hydrate accumulations are comparable (by volume) with the reserves in very small to major conventional gas fields. Various geologic, technologic, and economic factors affect the economic potential of studied accumulations. The MC 852/853 appears to be characterized by the most favorable combination of these factors, and thus is suggested to have the highest economic potential. The economic potential of gas hydrate accumulations at GC 204, GB 388, and AT 425/426 sites is ranked as ‘average’. Gas hydrate accumulations at GC 234/235, GC 184/185, and MC 798/842 sites contain only small volumes of hydrate-bound gas, and likely have no economic potential. Future gas hydrate research should focus on the detailed study of large structural gas hydrate accumulations from which gas may be profitably recovered (e.g. the MC 852/853 site).     

Gas hydrate saturation from acoustic impedance and resistivity logs in the Shenhu area, South China Sea

During the China’s first gas hydrate drilling expedition -1 (GMGS-1), gas hydrate was discovered in layers ranging from 10 to 25 m above the base of gas hydrate stability zone in the Shenhu area, South China Sea. Water chemistry, electrical resistivity logs, and acoustic impedance were used to estimate gas hydrate saturations. Gas hydrate saturations estimated from the chloride concentrations range from 0 to 43% of the pore space. The higher gas hydrate saturations were present in the depth from 152 to 177 m at site SH7 and from 190 to 225 m at site SH2, respectively. Gas hydrate saturations estimated from the resistivity using Archie equation have similar trends to those from chloride concentrations. To examine the variability of gas hydrate saturations away from the wells, acoustic impedances calculated from the 3 D seismic data using constrained sparse inversion method were used. Well logs acquired at site SH7 were incorporated into the inversion by establishing a relation between the water-filled porosity, calculated using gas hydrate saturations estimated from the resistivity logs, and the acoustic impedance, calculated from density and velocity logs. Gas hydrate saturations estimated from acoustic impedance of seismic data are ∼10-23% of the pore space and are comparable to those estimated from the well logs. The uncertainties in estimated gas hydrate saturations from seismic acoustic impedances were mainly from uncertainties associated with inverted acoustic impedance, the empirical relation between the water-filled porosities and acoustic impedances, and assumed background resistivity.     

Fluid venting and seepage at accretionary ridges: the Four Way Closure Ridge offshore SW Taiwan

Within the accretionary prism offshore SW Taiwan, widespread gas hydrate accumulations are postulated to occur based on the presence of a bottom simulating reflection. Methane seepage, however, is also widespread at accretionary ridges offshore SW Taiwan and may indicate a significant loss of methane bypassing the gas hydrate system. Four Way Closure Ridge, located in 1,500 m water depth, is an anticlinal ridge that would constitute an ideal trap for methane and consequently represents a site with good potential for gas hydrate accumulations. The analysis of high-resolution bathymetry, deep-towed sidescan sonar imagery, high-resolution seismic profiling and towed video observations of the seafloor shows that Four Way Closure Ridge is and has been a site of intensive methane seepage. Continuous seepage is mainly evidenced by large accumulations of authigenic carbonate precipitates, which appear to be controlled by the creation of fluid pathways through faulting. Consequently, Four Way Closure Ridge is not a closed system in terms of fluid migration and seepage. A conceptual model of the evolution of gas hydrates and seepage at accretionary ridges suggests that seepage is common and may be a standard feature during the geological development of ridges in accretionary prisms. The observation of seafloor seepage alone is therefore not a reliable indicator of exploitable gas hydrate accumulations at depth.     

AVO analysis of BSR to assess free gas within fine-grained sediments in the Shenhu area,South China Sea

Gas hydrates have been identified from two-dimensional (2D) seismic data and logging data above bottom simulating reflector (BSR) during China’s first gas hydrate drilling expedition in 2007. The multichannel reflection seismic data were processed to be preserved amplitudes for quantitatively analyzing amplitude variation with offset (AVO) at BSRs. Low P-wave velocity anomaly below BSR, coinciding with high amplitude reflections in 2D seismic data, indicates the presence of free gas. The absolute values of reflection coefficient versus incidence angles for BSR range from 0 to 0.12 at different CMPs near Site SH2. According to logging data and gas hydrate saturations estimated from resistivity of Site SH2, P-wave velocities calculated from effective media theory (EMT) fit the measured sonic velocities well and we choose EMT to calculate elastic velocities for AVO. The rock-physics modeling and AVO analysis were combined to quantitatively assess free gas saturations and distribution by the reflection coefficients variation of the BSRs in Shenhu area, South China Sea. AVO estimation indicates that free gas saturations immediately beneath BSRs may be about 0.2 % (uniform distribution) and up to about 10 % (patchy distribution) at Site SH2.     

Subsurface gas hydrates in the northern Gulf of Mexico

The northern Gulf of Mexico (GoM) has long been a focus area for the study of gas hydrates. Throughout the 1980s and 1990s, work focused on massive gas hydrates deposits that were found to form at and near the seafloor in association with hydrocarbon seeps. However, as global scientific and industrial interest in assessment of the drilling hazards and resource implications of gas hydrate accelerated, focus shifted to understanding the nature and abundance of “buried” gas hydrates. Through 2005, despite the drilling of more than 1200 oil and gas industry wells through the gas hydrate stability zone, published evidence of significant sub-seafloor gas hydrate in the GoM was lacking. A 2005 drilling program by the GoM Gas Hydrate Joint Industry Project (the JIP) provided an initial confirmation of the occurrence of gas hydrates below the GoM seafloor. In 2006, release of data from a 2003 industry well in Alaminos Canyon 818 provided initial documentation of gas hydrate occurrence at high concentrations in sand reservoirs in the GoM. From 2006 to 2008, the JIP facilitated the integration of geophysical and geological data to identify sites prospective for gas hydrate-bearing sands, culminating in the recommendation of numerous drilling targets within four sites spanning a range of typical deepwater settings. Concurrent with, but independent of, the JIP prospecting effort, the Bureau of Ocean Energy Management (BOEM) conducted a preliminary assessment of the GoM gas hydrate petroleum system, resulting in an estimate of 607 trillion cubic meters (21,444 trillion cubic feet) gas-in-place of which roughly one-third occurs at expected high concentrations in sand reservoirs. In 2009, the JIP drilled seven wells at three sites, discovering gas hydrate at high saturation in sand reservoirs in four wells and suspected gas hydrate at low to moderate saturations in two other wells. These results provide an initial confirmation of the complex nature and occurrence of gas hydrate-bearing sands in the GoM, the efficacy of the integrated geological/geophysical prospecting approach used to identify the JIP drilling sites, and the relevance of the 2008 BOEM assessment.