Depth dependency of stress ratios during the sedimentation of NW Gyeongsang Basin (Cretaceous), southeast Korea: Estimate of stress parameters and timing of tectonic episodes

The natural stress state in the lithosphere consists of the vertical load and Poisson ratio, and then additional horizontal compression and extension (denoted by Δσ_H and Δσ_T, respectively) are assumed to be superimposed upon this gravitational stress field. The resulting stress state is composed of the maximum, medium and minimum stresses denoted by σ₁, σ₂, and σ₃, respectively. The stress ratio is given as Φ = (σ₂ − σ₃)/(σ₁ − σ₃). A linear relation is found between Φ or 1/Φ and the vertical load in wrench-faulting and extensional stress regimes, respectively. The slope and intercept of the linear relation result in the additional horizontal stresses and level of (average) paleo-surface, respectively. Stress ratio is also determinable by the stress tensor inversion of fault-slip data. The earliest tectonic event (T_1 Event) in the Cretaceous Gyeongsang Basin consists of coexisting E–W compression and N–S extensional faulting episodes. Plots of Φ or 1/Φ against the burial depth (or vertical load) display several linear trends: two clusters in extensional episodes, and two or three clusters in wrench-faulting episodes. Because Δσ_H is assumed to be null or negligible in the extensional regime, Δσ_T is determinable from the slopes of two linear clusters as being −2.5 to −4.0 MPa. In wrench-faulting episodes, the values of Δσ_H are given to be 61.6–101.4 MPa by applying determined additional horizontal extensions. Determined levels of average paleo-surfaces and those of syndepostional structures illustrate that more than five wrench-faulting or extensional episodes have occurred during the T_1 Event, whose active age, consequently, ranges from the Barremian to the Coniacian. This supports that the coexisting coaxial faulting episodes with the same extension may correspond to the alternation of wrench-faulting and extensional episodes.     

Geochemical and isotopic approach to maturity/source/mixing estimations for natural gas and associated condensates in the Thrace Basin,NW Turkey

The Tertiary Thrace Basin located in NW Turkey comprises 9 km of clastic-sedimentary column ranging in age from Early Eocene to Recent in age. Fifteen natural gas and 10 associated condensate samples collected from the 11 different gas fields along the NW–SE extending zone of the northern portion of the basin were evaluated on the basis of their chemical and individual C isotopic compositions. For the purpose of the study, the genesis of CH₄, thermogenic C₂₊ gases, and associated condensates were evaluated separately.Methane appears to have 3 origins: Group-1 CH₄ is bacteriogenic (Calculated δ¹³C_C1–C = −61.48‰; Silivri Field) and found in Oligocene reservoirs and mixed with the thermogenic Group-2 CH₄. They probably formed in the Upper Oligocene coal and shales deposited in a marshy-swamp environment of fluvio-deltaic settings. Group-2 (δ¹³C_C1–C = −35.80‰; Hamitabat Field) and Group-3 (δ¹³C_1–C = −49.10‰; Değirmenköy Field) methanes are thermogenic and share the same origin with the Group-2 and Group-3 C₂₊ gases. The Group-2 C₂₊ gases include 63% of the gas fields. They are produced from both Eocene (overwhelmingly) and Oligocene reservoirs. These gases were almost certainly generated from isotopically heavy terrestrial kerogen (δ¹³C = −21‰) present in the Eocene deltaic Hamitabat shales. The Group-3 C₂₊ gases, produced from one field, were generated from isotopically light marine kerogen (δ¹³C = −29‰). Lower Oligoce ne Mezardere shales deposited in pro-deltaic settings are believed to be the source of these gases.The bulk and individual n-alkane isotopic relationships between the rock extracts, gases, condensates and oils from the basin differentiated two Groups of condensates, which can be genetically linked to the Group-2 and -3 thermogenic C₂₊ gases. However, it is crucial to note that condensates do not necessarily correlate to their associated gases.Maturity assessments on the Group-1 and -2 thermogenic gases based on their estimated initial kerogen isotope values (δ¹³C = −21‰; −29‰) and on the biomarkers present in the associated condensates reveal that all the hydrocarbons including gases, condensates and oils are the products of primary cracking at the early mature st age (R_eq = 0.55–0.81%). It is demonstrated that the open-system source conditions required for such an early-mature hydrocarbon expulsion exist and are supported by fault systems of the basin.     

The Angouran Zn (Pb) deposit,NW Iran: Evidence for a two stage,hypogene zinc sulfide–zinc carbonate mineralization

The unusually high grade hypogene zinc ore at Angouran in northwestern Iran (40.4% Zn, 1.9% Pb in the sulfide ore, 28.1% Zn, 4.4% Pb in the carbonate ore, and 110 g/t Ag) formed from an initially highly saline, reduced, relatively acid hydrothermal brine at two successive sulfide and carbonate ore stages. The early ore stage consists of multiple phases of sphalerite dominated sulfide ore breccia with subordinate amounts of galena (± Pb sulfosalts), minor pyrite, and abundant barite. Sphalerite precipitated at moderate temperatures (≥ 155 °C) because of pH increase in the presence of hangingwall marble. Smithsonite precipitated at a higher pH value (≥ 7) and at lower temperatures (≤ 120 °C) from dilute solutions (salinities close to zero) by mixing of the Zn bearing brines with cool, HCO₃⁻ bearing waters. The first melting points of the primary (LV) fluid inclusions in sphalerite and in hydrothermal quartz are unusually low (≤ − 60 °C), close to the eutectic point of the ZnCl₂–H₂O system (− 62 °C). Total salinities taken from the ZnCl₂–H₂O system as a best approximation correspond to 26–41 eq mass % ZnCl₂. The initial brine evolved to a CaCl₂–NaCl rich solution with 27 eq mass % salinity. Gas densities (≤ 0.1 g cm^− 3 for water vapor and ≤ 0.18 g cm^− 3 for CO₂) in the fluid inclusions indicate low pressure (≤ 5 bar for water vapor, and ≤ 100 bar for CO₂) at the entrapment temperatures.At the first carbonate ore stage sulfides continued to precipitate characteristically as arsenopyrite with minor amounts of galena and pyrite. The abrupt change of the fluid composition at the sulfide–carbonate boundary was accompanied by a change of the fluid temperature and pressure that produced brecciation of the sulfide ore matrix and an almost total dissolution of barite and replacement by the hypogene smithsonite. Alteration is restricted to ore deposition and consists of weak sericitization and silicification with local dolomitization at the sulfide ore stage, and pervasive dissolution of the hangingwall marble, in particular at the carbonate ore stage.The breccia orebody at Angouran is sited at the crestal portion of a domed antiform at the lithological and thrust boundary of Neoproterozoic–Lower Cambrian footwall schists and the hangingwall marble in rapidly uplifted and exhumated Angouran Block east of the Geynardjeh Thrust Fault. The footwall schists occupy a detachment fault zone above imbricated nappe sheets of the basement metamorphic complex of the Sanandaj–Sirjan zone. During the Pliocene, the nappe sheets were thrust toward the southwest onto the Miocene felsic volcanic rocks of the Urumieh Dokhtar Volcanic Belt that are intruded by 10 Ma late Miocene basalts. The 11.9 Ma and 18.4 Ma zircon ages of the felsic volcanic rocks indicate the lower age limit of the ore body emplacement.The associations with large scale, mid-late Miocene, felsic volcanism along the active Tethyan belt, as well as the ubiquitous presence of the volcanic rock clasts in the sphalerite ore matrix, provide strong evidence of the involvement of hydrothermal processes at Angouran. Ore fluids were successively and pulsatorily generated within the seismically active region. A following geothermal activity appears to have had a significant input in the formation of the carbonate ore of the hypogene, as well as the supergene stage. Stable isotope data suggest complex interaction of element sources and processes. Allowing a broad interpretation, the sulfur isotopic composition of the sulfides δ³⁴S (3.9 to 7.4‰) suggests that the sulfur could be sourced from evolving, mixed magmatic–basinal brine. The isotopic composition of the hypogene smithsonites (δ¹³C: 2.72 to 5.51‰, δ¹⁸O: 18.4 to 22.8‰) broadly supports the local geology and field relationships, which comply with a marble wallrock source for the carbonate ores. They lend support to the assumption that smithsonite was deposited from solutions with isotopic composition similar to those involved in the hydrothermal dolomitization of the marbles. The excess of dissolved marble precipitated as large volumes of travertine and as late calcite veins (δ¹³C: 18.8 to 20.3‰, δ¹⁸O: 3.1 to 6.4‰) at the mineralization site. Isotope values of the travertine (δ¹³C: 4.5 to 6.6‰, δ¹⁸O: 20.1 to 21.1‰ V-SMOW) are consistent with the involvement of CO₂ derived from thermogenic decarbonization of the host marble by waters of dominantly meteoric origin, most likely concomitantly with ore forming processes.The Angouran deposit is the only reported case of a two stage, hypogene zinc sulfide–zinc carbonate mineralization, and represents a new style of nonsulfide zinc mineralization.     

Fingerprinting a multistage metamorphic fluid–rock history: Evidence from grain scale Sr,O and C isotopic and trace element variations in high-grade marbles from East Antarctica

Granulite grade marble layers interlayered with metapelitic granulites from Lützow Holm Bay, East Antarctica, provide insight into fluid–rock interactions during burial to and exhumation from lower crustal levels. Sub-millimeter scale strontium, oxygen and carbon isotope variations along with LA-ICPMS trace element geochemistry and mineral chemistry of texturally characterized carbonates and associated minerals helped to reconstruct the multistage metamorphic fluid history.Fluid–rock interaction dating back to prograde metamorphism are still preserved in consistently low oxygen and high strontium isotope compositions (δ¹⁸O = 12‰; ⁸⁷Sr/⁸⁶Sr_(550Ma) = 0.7248) within a massif dolomitic marble layer that escaped significant later metasomatism. In most marbles, total re-crystallization and isotopic resetting occurred in the presence of “externally derived” hyper-saline fluids that circulated along the carbonate layers during the early stages of prograde metamorphism. This leads to a trend of increased radiogenic Sr in marbles towards the value of associated metapelitic rocks that have ⁸⁷Sr/⁸⁶Sr_(550Ma) of 0.764.LA-ICPMS studies on trace elements in carbonate and associated silicate minerals at different textural settings, distinguished using cathodoluminescence microscopy, revealed multiple metasomatic events during retrograde metamorphism. Trace element contents of Ba, Sr, Pb and U gave compelling evidence for metasomatic alteration that postdate the exsolution of carbonate at ~ 600 ºC, which can be correlated with the fluids released from the crystallization of anatectic melts and pegmatites. Subsequently, meteoric fluid infiltration occurred at a shallower level of the crust and caused extreme oxygen isotopic heterogeneity (δ¹⁸O = 14.7 ~ ? 4.9‰) and imprinted high concentration of fluid mobile elements. Taken together our results emphasize the importance of integrating textural and chemical heterogeneities to reveal the multiple episodes of fluid–rock interaction processes in a dynamic continental crust, which has major implications on migration of fluids and material and help in formulating models on the geodynamic evolution of crust.     

Nature of ore-forming fluid and formation conditions of BIF-hosted gold mineralization in the Archean Amalia Greenstone Belt,South Africa: Constraints from fluid inclusion and stable isotope studies

Orogenic gold mineralization in the Amalia greenstone belt is hosted by oxide facies banded iron-formation (BIF). Hydrothermal alteration of the BIF layers is characterized by chloritization, carbonatization, hematization and pyritization, and quartz-carbonate veins that cut across the layers. The alteration mineral assemblages consist of ankerite-ferroan dolomite minerals, siderite, chlorite, hematite, pyrite and subordinate amounts of arsenopyrite and chalcopyrite. Information on the physico-chemical properties of the ore-forming fluids and ambient conditions that promoted gold mineralization at Amalia were deduced from sulfur, oxygen and carbon isotopic ratios, and fluid inclusions from quartz-carbonate samples associated with the gold mineralization.Microthermometric and laser Raman analyses indicated that the ore-forming fluid was composed of low salinity H₂O-CO₂ composition (~3 wt% NaCl equiv.). The combination of microthermometric data and arsenopyrite-pyrite geothermometry suggest that quartz-carbonate vein formation, gold mineralization and associated alteration of the proximal BIF wall rock occurred at temperature-pressure conditions of 300 ± 30 °C and ∼2 kbar. Thermodynamic calculations at 300 °C suggest an increase in fO₂ (10⁻³²–10⁻³⁰ bars) and corresponding decrease in total sulfur concentration (0.002–0.001 m) that overlapped the pyrite-hematite-magnetite boundary during gold mineralization. Although hematite in the alteration assemblage indicate oxidizing conditions at the deposit site, the calculated low fO₂ values are consistent with previously determined high Fe/Fe + Mg ratios (>0.7) in associated chlorite, absence of sulfates and restricted positive δ³⁴S values in associated pyrite. Based on the fluid composition, metal association and physico-chemical conditions reported in the current study, it is confirmed that gold in the Amalia fluid was transported as reduced bisulfide complexes (e.g., Au(HS)₂⁻). At Amalia, gold deposition was most likely a combined effect of increase in fO₂ corresponding to the magnetite-hematite buffer, and reduction in total sulfur contents due to sulfide precipitation during progressive fluid-rock interaction.The epigenetic features coupled with the isotopic compositions of the ore-forming fluid (δ³⁴S_ΣS = +1.8 to +2.3‰, δ¹⁸O_H2O = +6.6 to +7.9‰, and δ¹³C_ΣC = −6.0 to −7.7‰ at 300–330 °C) are consistent with an externally deep-sourced fluid of igneous signature or/and prograde metamorphism of mantle-derived rocks.     

Characteristic Features of REE and Pb–Zn–Ag Mineralizations in the Na Son Deposit,Northeastern Vietnam

The Na Son deposit is a small‐scale Pb–ZnPb–Zn–Ag deposit in northeast Vietnam and consists of biotite–chlorite schist, reddish altered rocks, quartz veins and syenite. The biotite–chlorite schist is intruded by syenite. Reddish altered rocks occur as an alteration halo between the biotite–allanite‐bearing quartz veins and the biotite–chlorite schist. Allanite occurs in the biotite–allanite‐bearing quartz veins and in the proximal reddish altered rocks. Rare earth element (REE) fluorocarbonate minerals occur along fractures or at rim of allanite crystals. The later horizontal aggregates of sulfide veins and veinlets cut the earlier reddish altered rocks. The earlier Pb–Zn veins consist of a large amount of galena and lesser amounts of sphalerite, pyrite and molybdenite. The later Cu veins cutting the Pb–Zn veins include chalcopyrite and lesser amounts of tetrahedrite and pyrite. The occurrences of two‐phase H₂O–CO₂ fluid inclusions in quartz from biotite–allanite‐bearing quartz veins and REE‐bearing fluorocarbonate minerals in allanite suggest the presence of CO₂ and F in the hydrothermal fluid. The oxygen isotopic ratios of the reddish altered rocks, biotite–chlorite schist, and syenite range from +13.9 to +14.9 ‰, +11.5 to +13.3 ‰, and +10.1 to +11.6 ‰, respectively. Assuming an isotopic equilibrium between quartz (+14.6 to +15.8 ‰) and biotite (+8.6 ‰) in the biotite–allanite‐bearing quartz vein, formation temperature was estimated to be 400°C. At 400°C, δ¹⁸O values of the hydrothermal fluid in equilibrium with quartz and biotite range from +10.5 to +11.7 ‰. These δ¹⁸O values are consistent with fluid that is derived from metamorphism. Assuming an isotopic equilibrium between galena (+1.5 to +1.7 ‰) and chalcopyrite (+3.4 ‰), the formation temperature was estimated to be approximately 300°C. The formation temperature of the Na Son deposit decreased with the progress of mineralization. Based on the geological data, occurrence of REE‐bearing minerals and oxygen isotopic ratios, the REE mineralization is thought to result from interaction between biotite–chlorite schist and REE‐, CO₂‐ and F‐bearing metamorphic fluid at 400°C under a rock‐dominant condition.     

Ore genesis and hydrothermal evolution of the Huanggang skarn iron–tin polymetallic deposit,southern Great Xing'an Range: Evidence from fluid inclusions and isotope analyses

The southern Great Xing'an Range is one of the most important metallogenic belts in northern China, and contains numerous Pb–Zn–Ag–Cu–Sn–Fe–Mo deposits. The Huanggang iron–tin polymetallic skarn deposit is located in the Sn-polymetallic metallogenic sub-belt. Skarns and iron orebodies occur as lenses along the contact between granite plutons and the Lower Permian Huanggangliang Formation marble or Dashizhai Formation andesite. Field evidence and petrographic observations indicate that the three stages of hydrothermal activity, i.e., skarn, oxide and sulfide stages, all contributed to the formation of the Huanggang deposit.The skarn stage is characterized by the formation of garnet and pyroxene, and high-temperature, hypersaline hydrothermal fluids with isotopic compositions that are similar to those of typical magmatic fluids. These fluids most likely were generated by the separation of brine from a silicate melt instead of being a product of aqueous fluid immiscibility. The iron oxide stage coincides with the replacement of garnet and pyroxene by amphibole, chlorite, quartz and magnetite. The hydrothermal fluids of this stage are represented by L-type fluid inclusions that coexist with V-type inclusions with anomalously low δD values (approximately − 100 to − 116‰). The decrease in ore fluid δ¹⁸O_H2O values with time coincides with marked decreases in the fluid salinity and temperature. Based on the fluid inclusion and stable isotopic data, the ore fluid evolved by boiling of the magmatic brine. The sulfide stage is characterized by the development of sphalerite, chalcopyrite, fluorite, and calcite veins, and these veins cut across the skarns and orebodies. The fluids during this stage are represented by inclusions with a variable but continuous sequence of salinities, mainly low-salinity inclusions. These fluids yield the lowest δ¹⁸O_H2O values and moderate δD values ( − 1.6 to − 2.8‰ and − 101 to − 104‰, respectively). The data indicate that the sulfide stage fluids originated from the mixing of residual oxide-stage fluids with various amounts of meteoric water. Boiling occurred during this stage at low temperatures.The sulfur isotope (δ³⁴S) values of the sulfides are in a narrow range of − 6.70 to 4.50‰ (mean = − 1.01‰), and the oxygen isotope (δ¹⁸O) values of the magnetite are in a narrow range of 0.1 to 3.4‰. Both of these sets of values suggest that the ore-forming fluid is of magmatic origin. The lead isotope compositions of the ore (²⁰⁶Pb/²⁰⁴Pb = 18.252–18.345, ²⁰⁷Pb/²⁰⁴Pb = 15.511–15.607, and ²⁰⁸Pb/²⁰⁴Pb = 38.071–38.388) are consistent with those of K-feldspar granites (²⁰⁶Pb/²⁰⁴Pb = 18.183–18.495, ²⁰⁷Pb/²⁰⁴Pb = 15.448–15.602, ²⁰⁸Pb/²⁰⁴Pb = 37.877–38.325), but significantly differ from those of Permian marble (²⁰⁶Pb/²⁰⁴Pb = 18.367–18.449, ²⁰⁷Pb/²⁰⁴Pb = 15.676–15.695, ²⁰⁸Pb/²⁰⁴Pb = 38.469–38.465), which also suggests that the ore-forming fluid is of magmatic origin.     

Carbon-oxygen isotopic geochemistry of the Yangla Cu skarn deposit,SW China: Implications for the source and evolution of hydrothermal fluids

The Yangla Cu deposit is the largest Cu skarn deposit in the Jinshajiang tectonic belt. Based on the detailed observation of crosscutting relationships, three mineralization stages (i.e., pre-ore, ore and supergene) have been identified in the Yangla deposit. The pre-ore stage is dominated by prograde skarn. The ore stage is characterized by the precipitation of hydrous silicate minerals, Fe-oxides, Fe-Cu-Mo-sulfides, quartz and calcite, whose mineral assemblages were formed in the early and late sub-ore stages. The early sub-ore stage is marked by retrograde alteration with the deposition of hydrous silicate minerals (e.g., actinolite, epidote and chlorite), Fe-oxides, abundant Fe-Cu-Mo-sulfides, quartz and minor calcite. Whilst, the late sub-ore stage, associated with silicic and carbonate alteration, is represented by widespread thick quartz or calcite veins with disseminated pyrite, chalcopyrite, galena and sphalerite. We present new carbon-oxygen (C-O) isotopic compositions of the ore-hosting marble and hydrothermal calcite of this deposit. The hydrothermal calcite in the Yangla deposit was precipitated from both the early and late sub-ore stages. Calcite I from the early sub-ore stage is anhedral, and occurs as spot in the skarn or locally replaces the skarn minerals. Calcite II from the late sub-ore stage is distinguished by being coarse-grained, subhedral to euhedral and its occurrence in thick veins. Calcite I contains lower δ¹³C_PDB (−7.0‰ to −5.0‰) and δ¹⁸O_SMOW (7.2‰ to 12.7‰) than Calcite II (δ¹³C_PDB = −4.5‰ to −2.3‰; δ¹⁸O_SMOW = 10.7‰ to 19.4‰). In the δ¹³C_PDB vs. δ¹⁸O_SMOW diagram, the Calcite I and Calcite II data fall close to the igneous carbonatite field and between the fields of igneous carbonatite and marine carbonates, respectively. This suggests a dominantly magmatic origin for the early sub-ore fluids, and there might have been increasing carbonate wall rock involvement towards the late sub-ore stage. The ore-hosting marble (δ¹³C_PDB = −4.8‰ to −0.3‰; δ¹⁸O_SMOW = 10.2‰ to 23.9‰) also shows a positive δ¹³C_PDB vs. δ¹⁸O_SMOW correlation, which is interpreted to reflect the decreasing alteration intensity during the interactions between the hydrothermal fluids and ore-hosting carbonates. Simulated calculation suggests that both the Calcite I and Calcite II precipitated at 350 °C to 250 °C and 250 °C to 150 °C, respectively. We proposed that CO₂ degassing and water/rock interactions were likely the two major processes that precipitated the calcite and led to the observed C-O isotopic features of the Yangla Cu deposit.     

Genesis of the Maoling gold deposit in the Liaodong Peninsula: Constraints from a combined fluid inclusion,C-H-O-S-Pb-He-Ar isotopic and geochronological studies

The large tonnage Maoling gold deposit (25 t @ 3.2 g/t) is located in the southwest Liaodong Peninsula, North China Craton. The deposit is hosted in the Paleoproterozoic metamorphic rocks. Four stages of mineralization were identified in the deposit: (stage I) quartz-arsenopyrite ± pyrite, (stage II) quartz-gold- arsenopyrite-pyrrhotite, (stage III) quartz-gold- polymetallic sulfide, and (stage IV) quartz-calcite-pyrrhotite. In this paper, we present fluid inclusion, C-H-O-S-Pb-He-Ar isotope data, zircon U-Pb, and gold-bearing sulfide (i.e. arsenopyrite and pyrrhotite) Rb-Sr age of the Maoling gold deposit to constrain its genesis and ore-forming mechanism. Three types of fluid inclusions were distinguished in quartz-bearing veins, including liquid-rich two-phase (WL type), gas-rich two-phase (GL type), and daughter mineral-bearing fluid inclusions (S type). Fluid inclusions data show that the homogenization at temperatures 197 to 372 °C for stage I, 126 to 319 °C for stage II, 119 to 189 °C for stage III, and 115 to 183 °C for stage IV, with corresponding salinities of 3.7 to 22.6 wt.%, 4.7 to 23.2 wt.%, 5.3 to 23.2 wt.%, and 1.7 to 14.9 wt.% NaCl equiv., respectively. Fluid boiling was the critical factor controlling the gold and associated sulfide precipitation at Maoling. Hydrogen and oxygen stable isotopic analyses for quartz yielded δ¹⁸O = ?5.0‰ to 9.8‰ and δ D = ?133.5‰ to ?77.0‰. Carbon stable isotopic analyses for calcite and ankerite yielded δ¹³C = ?2.3‰ to ?1.2‰ and O = 7.9‰ to 14.1‰. The C-H-O isotope data show that the ore-forming fluids were originated from magmatic water with meteoric water input during mineralization. Hydrothermal inclusions in arsenopyrite have ³He/⁴He ratios of 0.002 Ra to 0.054 Ra, and ⁴⁰Ar/³⁶Ar rations of 1225 to 3930, indicating that the ore-forming fluids were dominantly derived from crustal sources almost no mantle input. Sulfur isotopic values of Maoling fine-grained granite range from 6.‰1 to 9.8‰, with a mean of 7.7‰, δ³⁴S values of arsenopyrite from the mineralized phyllite (host rock) range from 8.9‰ to 10.6‰, with a mean of 10.0‰, by contrast, δ³⁴S values of sulfides from ore vary between 4.3‰ and 10.6‰, with a mean of 6.8‰, suggesting that sulfur was mainly originated from both the host rock and magma. Lead radioactive isotopic analyses for sulfides yielded ²⁰⁶Pb/²⁰⁴Pb = 15.830–17.103, ²⁰⁷Pb/²⁰⁴Pb = 13.397–15.548, ²⁰⁸Pb/²⁰⁴Pb = 35.478–36.683, and for Maoling fine-grained granite yielded ²⁰⁶Pb/²⁰⁴Pb = 18.757–19.053, ²⁰⁷Pb/²⁰⁴Pb = 15.596–15.612, and ²⁰⁸Pb/²⁰⁴Pb = 38.184–39.309, also suggesting that the ore-forming materials were mainly originated from the host rocks and magma. Zircon U-Pb dating demonstrates that the Maoling fine-grained granite was emplaced at 192.7 ± 1.8 Ma, and the host rock (mineralized phyllite) was emplaced at some time after 2065.0 ± 27.0 Ma. Arsenopyrite and pyrrhotite give Rb–Sr isochron age of 188.7 ± 4.5 Ma, indicating that both magmatism and mineralization occurred during the Early Jurassic. Geochronological and geochemical data, together with the regional geological history, indicate that Early Jurassic magmatism and mineralization of the Maoling gold deposit occurred during the subducting Paleo-Pacific Plate beneath Eurasia, and the Maoling gold deposit is of the intrusion-related gold deposit type.     

3-D Mohr circle construction using vein orientation data from Gadag (southern India) – Implications to recognize fluid pressure fluctuation

In this paper orientations of quartz veins from the Archaean age lode-gold bearing region of Gadag (southern India) are used to determine the relative stress and fluid pressure (P_f) conditions by constructing 3-D Mohr circle. Anisotropy of magnetic susceptibility (AMS) analysis of the host massive metabasalt reveals that the magnetic foliation is NW–SE striking, which is related to early NE–SW compression (D1/D2 deformation) that affected the region. The quartz veins have a wide range of orientations, with NW–SE striking veins (steep northeasterly dips) being the most prominent. Vein emplacement is inferred to have taken place under NW–SE compression that is known to have caused late deformation (D3) in the region. It is argued that the NW–SE fabric defined the pre-existing anisotropy and channelized fluid flow during D3. The permeability was initially low, which resulted in high P_f (>σ₂). 3-D Mohr circle analysis indicates that the driving pressure ratio (R′) was 0.94, a condition that favoured fracturing and reactivation of fabric elements (foliations and fractures) having a wide range of orientations. This led to an increase in permeability and fluid flowed (burped) into the fractures. Resulting vein emplacement and sealing of fractures led to a reduction of P_f (<σ₂). It is argued that at this low P_f, NW–SE oriented structures continued to remain susceptible to reactivation and vein emplacement, while fractures of all other orientations were inactive and remained sealed. As a consequence, the study area has a cluster of NW–SE oriented veins. R′ is calculated to be 0.07 from 3-D Mohr circle analysis at low P_f, when fractures with NW–SE orientation only were susceptible to dilation. However, it is envisaged that any emplacement of veins in these fractures would have sealed them, thus reducing the permeability and initiating the next cycle of rise in P_f (>σ₂). Thus, it is concluded that the quartz veins in the Gadag region are a consequence of an interplay between conditions that fluctuated from P_f > σ₂ to P_f < σ₂.     

Geochemical and isotopic evidence for a magmatic-hydrothermal origin of the polymetallic vein-type Zn-Pb deposits in the northwest margin of Jiangnan Orogen,South China

Polymetallic vein-type Zn-Pb deposits are located in the Xiangxi–Qiandong zinc-lead metallogenic belt (XQMB) of the northwestern margin of the Jiangnan Orogen, South China. Ores are mainly found in fault-bounded quartz veins hosted in the upper part of the Banxi Group that consists of low-grade metamorphic sandstone, siltstone with minor tuff interbeds. The Zn-Pb deposits primarily contain sphalerite, galena, chalcopyrite and pyrite, accompanied by quartz and minor calcite. Zinc, lead, copper, indium and gallium are enriched in these ores. Investigation of the ore fluid reveals low temperature (87–262 °C) with scattered salinity (range from 2.73 to 26.64 wt% NaCl_eqv.). Hydrogen and oxygen isotopic compositions of fluid inclusions in quartz indicate mixing of magmatic hydrothermal fluid and meteoric water (δ¹⁸O_{H2O SMOW} = 0.2‰ to 4.2‰; δD_{H2O SMOW} = −126‰ to −80‰). Carbon and oxygen isotopic composition of carbonate samples indicate the magmatic hydrothermal origin of CO₃²⁻ or CO₂ in ore-forming fluid (δ¹³C_PDB = −6.9‰ to −5.7‰, δ¹⁸O_SMOW = 11.3‰ to 12.7‰). Sulfur and lead isotopic compositions (δ³⁴S_VCDT = 8.8–14.2‰ and ²⁰⁶Pb/²⁰⁴Pb = 17.156–17.209, ²⁰⁷Pb/²⁰⁴Pb = 15.532–15.508, ²⁰⁸Pb/²⁰⁴Pb = 37.282–37.546) demonstrate that sulfur sources were relatively uniform, and low radiogenic lead isotopic compositions indicate that ore metals were derived from a relatively unradiogenic source, probably by mixing of mantle with crust. Therefore, polymetallic vein-type Zn-Pb mineralization in this area probably arose from a magmatic-related hydrothermal system, and the deposition of sulfides occurred in response to cooling and boiling of magmatic hydrothermal fluids (high salinity, high δ¹⁸O_H2O and δD_H2O and metal-bearing), and is mainly the result of emplacement into open space and mixing with meteoric water (low salinity, low δ¹⁸O_H2O and δD_H2O). This study provides direct evidence that magmatism was involved in the ore-forming processes of the low temperature metallogenic district, South China, and it raises awareness about the presence of polymetallic vein-type Zn-Pb deposits in the northwest margin of Jiangnan Orogen and their potential as a source of zinc, copper, indium and gallium.     

Alteration and mineralization at the Zhibula Cu skarn deposit,Gangdese belt,Tibet

The Zhibula Cu skarn deposit contains 0.32 Mt. Cu metal with an average grade of 1.64% and is located in the Gangdese porphyry copper belt in southern Tibet. The deposit is a typical metasomatic skarn that is related to the interaction of magmatic–hydrothermal fluids and calcareous host rock. Stratiform skarn orebodies occur at the contact between tuff and marble in the Lower Jurassic Yeba Formation. Alteration zones generally grade from a fresh tuff to a garnet-bearing tuff, a garnet pyroxene skarn, and finally to a wollastonite marble. Minor endoskarn alteration zonations are also observed in the causative intrusion, which grade from a fresh granodiorite to a weakly chlorite-altered granodiorite, a green diopside-bearing granodiorite, and to a dark red-brown garnet-bearing granodiorite. Prograde minerals, which were identified by electron probe microanalysis include andradite–grossularite of various colors (e.g., red, green, and yellow) and green diopside. Retrograde metamorphic minerals overprint the prograde skarn, and are mainly composed of epidote, quartz, and chlorite. The ore minerals consist of chalcopyrite and bornite, followed by magnetite, molybdenite, pyrite, pyrrhotite, galena, and sphalerite. Three types of fluid inclusions are recognized in the Zhibula deposit, including liquid-rich two-phase inclusions (type L), vapor-rich two-phase inclusions (type V), and daughter mineral-bearing three-phase inclusions (type S). As the skarn formation evolved from prograde (stage I) to early retrograde (stage II) and later retrograde (stage III), the ore-forming fluids correspondingly evolved from high temperature (405–667 °C), high salinity (up to 44.0 wt.% NaCl equiv.), and high pressure (500–600 bar) to low-moderate temperature (194–420 °C), moderate-high salinity (10.1–18.3 and 30.0–44.2 wt.% NaCl equiv.), and low-moderate pressure (250–350 bar). Isotopic data of δ³⁴S (− 0.1‰ to − 6.8‰, estimated δ³⁴S_fluids = − 0.7‰), δD_H2O (− 91‰ to − 159‰), and δ¹⁸O_H2O (1.5‰ to 9.2‰) suggest that the ore-forming fluid and material came from magmatic–hydrothermal fluids that were associated with Miocene Zhibula intrusions. Fluid immiscibility likely occurred at the stage I and stage II during the formation of the skarn and mineralization. Fluid boiling occurred during the stage III, which is the most important Cu deposition mechanism for the Zhibula deposit.     

The Nadun Cu–Au mineralization,central Tibet: Root of a high sulfidation epithermal deposit

A new high sulfidation epithermal Cu–Au occurrence (Nadun) has been discovered adjacent to the Cretaceous Duolong porphyry Cu–Au deposit within the Bangong–Nujiang metallogenic belt, central Tibet. The Nadun Cu–Au mineralization is hosted in a tectonic–hydrothermal breccia with advanced argillic alteration, which occurs above sandstone, associated with quartz–pyrite veins. The granodiorite porphyry with strong argillic alteration yields a zircon U–Pb age of 119.1 ± 1.3 Ma, whereas the weakly argillic granodiorite porphyry intruded into the breccia has a younger age of 116.1 ± 1.3 Ma. This indicates that Cu–Au epithermal mineralization likely occurred between ~ 116 Ma and ~ 119 Ma, consistent with the duration of magmatic–hydrothermal activity at Duolong (~ 115–118 Ma), and providing evidence that Nadun and Duolong were formed during the same event. Moreover, the Nadun and Duolong porphyries have similar Hf isotopic compositions (εHf(t) values ranging from − 8.8 to 8.1; mean = 5.0 ± 1.1, n = 32), likely indicating that the deposits are comagmatic. In addition, boiling assemblages in vapor-rich inclusions coexisting with brines occur in early stage quartz–pyrite veins, and likely record phase separation at a temperature of > 550–300 °C and pressure of 700–110 bars. Most liquid-rich fluid inclusions formed at the breccia stage show similar salinity (1.7–19.3 wt.% NaCl equiv) to vapor-rich inclusions from the underlying quartz–pyrite veins, likely indicating vapor contraction during cooling at elevated presssure. This suggests that quartz–pyrite veins may act as conduits for ore-forming fluid traveling from the porphyry to the epithermal hydrothermal system. O and H isotopic compositions (δ¹⁸O_fluid = 0.42–9.71‰ and δD = − 102 to − 66‰) suggest that ore-forming fluids are dominantly from a magmatic source with a minor addition of meteoric water at a later stage. The S and Fe isotope compositions of sulfides (δ³⁴S = − 5.9 to 0.5‰ and δ⁵⁷Fe = − 2.15 to 0.17‰) decrease from the quartz–pyrite vein to breccia ore, indicating that ore-forming fluids gradually become SO₄²-enriched and relatively oxidized. This body of evidence suggests that the Nadun Cu–Au mineralization may represent the root of a high sulfidation epithermal deposit.     

Mineralogy,chalcopyrite ReOs geochronology and sulfur isotope of the Hujiayu Cu deposit in the Zhongtiao Mountains,North China Craton: Implications for a Paleoproterozoic metamorphogenic copper mineralization

The Hujiayu Cu deposit, located in the Zhongtiao Mountains district of southern North China Craton, is hosted by graphite schist and dolomitic marble with disseminated to veinlet (stage I) and thick vein (stage II) mineralization. Stage I mineralization, characterized by stratabound, disseminated pyrite and chalcopyrite within the graphite schist host rock, formed at the syn-metamorphic stage. Graphite geothermometry showed that the host rock was subjected to an upper-greenschist to lower amphibolite metamorphism at a temperature range of 486 to 596 °C, averaging of 546 ± 35 °C (1 σ, n = 19). Stage II mineralization, consisting of brecciated dolomitic thick veins cemented by quartz-sulfide assemblages, was a product of metamorphic hydrothermal activity. This thick vein was subdivided into an early hydrothermal dolomitic alteration composing of dolomitic breccia with some cobaltiferous pyrite (stage IIa) and a late siliceous-copper mineralization consisting of quartz-sulfide assemblages (stage IIb). A clausthalite–siegenite–sphalerite–chalcopyrite mineral assemblage was observed in stage IIb, constraining the sulfur fugacity and selenium fugacity within − 18.7 to − 11.7 and − 21.7 to − 14.7, respectively. It was inferred stage IIb was marked by a drop in sulfur fugacity and a substantial increase in selenium fugacity after the major chalcopyrite precipitation. Calculations based on the compositions of cobaliterous pyrite and sphalerite reveal that the mineral assemblage at stage IIa formed at an approximately temperature range of 400 to 300 °C, whereas the minerals in stage IIb occurred at temperature of 256 ± 9 °C (1 σ, n = 7). Sulfides from stage I have δ³⁴S value ranging from 10.1 to 22.2‰ with an average value of 16.9 ± 3.4‰ (1 σ, n = 27), supporting the model that sulfides precipitated through thermochemical reduction of sulfate at sedimentary stage followed by metamorphic homogenization of δ³⁴S isotopic signatures. Sulfides from the stage II have δ³⁴S values in highly variable ranging from 3.4 to 19.2‰, indicating a rather complex source. Four chalcopyrite samples yielded a weighted model age of 1952 ± 39 Ma (1 σ, MSWD = 1.5), suggesting that the copper mineralization formed synchronously with regional metamorphism (1970–1850 Ma) and hence a Paleoproterozoic metamorphogenic copper mineralization is implicated. Therefore, we envisaged disseminated-veinlet mineralization formed during a metamorphic peak and the major hydrothermal copper mineralization occurred during the retrograde cooling.     

Geology and isotope geochemistry (C–O–S) of the Diyadin gold deposit,Eastern Turkey: A newly-discovered Carlin-like deposit

Diyadin mineralization is the first reported gold deposit located in a collisional tectonic environment in Eastern Anatolia. The mineralization is related to N–S and N10–20°W-trending fault systems and hosted within the Paleozoic metamorphic basement rocks of the Anatolide–Toride microcontinent. Calc-schist, dolomitic marble and Miocene and Quaternary volcanic rocks comprise the exposed units in the mineralized area. Geochemical signatures, alteration types and host rock characteristics of the Diyadin gold deposit resemble those of Carlin-type deposits. Mineralization is constrained by alteration of overlying volcanic rocks to younger than ~ 14 Ma (K–Ar).Carbon and oxygen stable isotope measurements of carbonate rocks were made on six drill holes (n = 81) with an additional four samples of fresh carbonate rocks from surface outcrops. Background carbonate rocks have δ¹³C_V-PDB ~ 1.8‰ and δ¹⁸O_V-SMOW ~ 27‰. Isotopically-altered host rock samples have decreased δ¹⁸O (down to ~+11.4‰) and variable δ¹³C (from − 3.6 to + 4.8‰). Postore carbonate veins and cave-fill material have distinctly different isotopic signatures, particularly carbon (from δ¹³C = + 8.4 to + 9.8‰). Whether this post-ore carbonate is simply very late in mineralization associated with the gold system, or is a completely different, younger system utilizing the same pathways, is unclear at present. Within the host rock sample set, there is no correlation between gold and δ¹³C, and a weak correlation between gold and δ¹⁸O, indicative of water–rock interaction and isotopic alteration. Both the isotopic data and structural mapping suggest that the main upflow zone for the deposit is near the northern portion of the drill fence. Additional data at multiple scales are required to clarify the relationship(s) between fluid flow and mineralization.     

Geology and fluid characteristics of the Ulu Sokor gold deposit,Kelantan, Malaysia: Implications for ore genesis and classification of the deposit

The Ulu Sokor gold deposit is one of the most famous and largest gold deposits in Malaysia and is located in the Central Gold Belt. This deposit consists of three major orebodies that are related to NS- and NE-striking fractures within fault zones in Permian-Triassic meta-sedimentary and volcanic rocks of the East Malaya Block. The faulting events represent different episodes that are related to each orebody and are correlated well with the mineralogy and paragenesis. The gold mineralization consists of quartz-dominant vein systems with sulfides and carbonates. The hydrothermal alteration and mineralization occurred during three stages that were characterized by (I) silicification and brecciation; (II) carbonatization, sericitization, and chloritization; and (III) quartz–carbonate veins.Fluid inclusions in the hydrothermal quartz and calcite of the three stages were studied. The primary CO₂–CH₄–H₂O–NaCl fluid inclusions in stage I are mostly related to gold mineralization and display homogenization temperatures of 269–389 °C, salinities of 2.77–11.89 wt.% NaCl equivalent, variable CO₂ contents (typically 5–29 mol%), and up to 15 mol% CH₄. In stage II, gold was deposited at 235–398 °C from a CO₂ ± CH₄–H₂O–NaCl fluid with a salinity of 0.83–9.28 wt.% NaCl equivalent, variable CO₂ contents (typically 5–63 mol%), and up to 4 mol% CH₄. The δ¹⁸O_H2O and δD values of the ore-forming fluids from the stage II quartz veins are 4.5 to 4.8‰ and − 44 to − 42‰, respectively, and indicate a metamorphic–hydrothermal origin. Oxygen fugacities calculated for the entire range of T-P-X_CO2 conditions yielded log f_O2 values between − 28.95 and − 36.73 for stage I and between − 28.32 and − 39.18 for stage II. These values indicate reduced conditions for these fluids, which are consistent with the mineral paragenesis, fluid inclusion compositions, and isotope values.The presence of daughter mineral-bearing aqueous inclusions is interpreted to be a magmatic signature of stage IIIa. Combined with the oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 6.8 to 11.9‰, δD = − 77 to − 62‰), these inclusions indicate that the initial fluid was likely derived from a magmatic source. In stage IIIb, the gold was deposited at 263° to 347 °C from a CO₂–CH₄–H₂O–NaCl fluid with a salinity of 5.33 to 11.05 wt.% NaCl equivalent, variable CO₂ contents (typically 9–15 mol%), and little CH₄. The oxygen and hydrogen isotopic compositions of this fluid (δ¹⁸O_H2O = 8.1 to 8.8‰, δD = − 44 to − 32‰) indicate that it was mainly derived from a metamorphic–hydrothermal source. The CO₂–H₂O ± CH₄–NaCl fluids that were responsible for gold deposition in the stage IIIc veins had a wide range of temperatures (214–483 °C), salinities of 1.02 to 21.34 wt.% NaCl equivalent, variable CO₂ contents (typically 4–53 mol%), and up to 7 mol% CH₄. The oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 8.5 to 9.8‰, δD = − 70 to − 58‰) were probably acquired at the site of deposition by mixing of the metamorphic–hydrothermal fluid with deep-seated magmatic water and then evolved by degassing at the site of deposition during mineralization. The log f_O2 values from − 28.26 to − 35.51 also indicate reduced conditions for this fluid in stage IIIc. Moreover, this fluid had a near-neutral pH and δ³⁴S values of H₂S of − 2.32 to 0.83‰, which may reflect the derivation of sulfur from the subducted oceanic lithospheric materials.The three orebodies represent different gold transportation and precipitation models, and the conditions of ore formation are related to distinct events of hydrothermal alteration and gold mineralization. The gold mineralization of the Ulu Sokor deposit occurred in response to complex and concurrent processes involving fluid immiscibility, fluid–rock reactions, and fluid mixing. However, fluid immiscibility was the most important mechanism for gold deposition and occurred in these orebodies, which have corresponding fluid properties, structural controls, geologic characteristics, tectonic settings, and origins of the ore-forming matter. These characteristics of the Ulu Sokor deposit are consistent with its classification as an orogenic gold deposit, while some of the veins are genetically related to intrusions.     

In situ LA–MC–ICP–MS boron isotope and zircon U–Pb age determinations of Paleoproterozoic borate deposits in Liaoning Province,northeastern China

A large number of Paleoproterozoic borate deposits are hosted by the lower units of a volcanic-sedimentary sequence in Liaoning Province, northeastern China, and are a major source of boron in China. The ore-bearing wall rocks in the deposits are serpentinized ultrabasic rocks and carbonates, with layered leptynites, leptites, amphibolites, and migmatites adjacent to the ore. Both the borate ores and country rocks contain tourmaline, although the country rocks have much lower abundances of the mineral. Based on in situ boron isotope measurements using laser ablation–multi-collector–inductively coupled plasma–mass spectrometry (LA–MC–ICP–MS), boron isotope data show that: (1) δ¹¹B values of borate ores range from + 6.8‰ to + 13.9‰ (mean + 10.8‰); (2) tourmalines from the borate ores have δ¹¹B values from + 9.5‰ to + 12.7‰; and (3) the wall rocks within the borate ores yield slightly lower δ¹¹B values ranging from + 5.7‰ to + 7.6‰, and those outside the deposits from − 9.9‰ to − 5.9‰. Positive δ¹¹B values in borates as well as in tourmalines inside the mining area indicate that boron in these Paleoproterozoic borate deposits was derived from marine evaporites. δ³⁴S_V-CDT (where V-CDT is Vienna Canyon Diablo Troilite) values of borate ores, serpentinized marbles, and anhydrites range from + 16.1‰ to + 24.7‰, whereas δ¹³C_V-PDB (where V-PDB is Vienna Pee Dee Belemnite) values of marbles range from + 3.2‰ to + 5.9‰. These isotopic characteristics are interpreted to reflect formation in a marine evaporative environment. LA–MC–ICP–MS zircon weighted²⁰⁷Pb/²⁰⁶Pb ages of leptite and serpentinized olivine basalt from the hanging wall of the borate deposits are 2139 ± 13 Ma and 2130 ± 19 Ma, respectively. Therefore, the (~ 2.2 Ga) borate deposits may have originated from marine evaporative boron-bearing sediments, which were interbedded within bimodal volcanic rocks during the early stages of development of the Liaoji rift.     

Geology,mineralogy, and geochemistry of fault-controlled hydrothermal Cu–Au mineralization in the Shanmen Volcanic Basin,SE China

The Yukeng–Banling deposit is a typical fault-controlled hydrothermal Cu–Au deposit in the Shanmen Volcanic Basin (SVB), SE China. Ore bodies commonly occur as lodes, lenses and disconnected pods dipping SW with vertical zonation of ore minerals. Ore-related hydrothermal alteration is well developed on both sides of the veins, dominated by silicification, sericitization, chloritization and argillation with a banded alteration zonation. The mineralization can be divided into three stages (stages I, II and III). Native gold is present as veinlets in fractures of fine-grained pyrite from stage II.Zircon U–Pb and Rb–Sr isochron ages indicate that the Cu–Au mineralization is coeval with the Caomen alkaline granite and Xiaokeng quartz-diorite, both emplaced at ca. 102 Ma. Microthermometric measurements of fluid inclusions in quartz and sphalerite from stage II veins indicate that the Yukeng–Banling deposit is an epithermal deposit. Six ore-related quartz grains have δD_H2O values of − 69 to − 43‰, and δ¹⁸O_H2O values calculated using total homogenization temperatures that range from − 2.0 to 0.7‰. All samples plot in an area between the magmatic field and the meteoric line, suggesting that the ore-forming fluids are derived from a mixed source of magmatic and meteoric waters. δ³⁴S values for eight pyrite separates range from − 2.1 to + 4.1‰ with an average of + 1.7‰, and δ³⁴S values for galena and sphalerite are 2.3‰ and 2.2‰, similar to magmatic sulfur. Four alkaline granite samples have Pb isotopic ratios (²⁰⁶Pb/²⁰⁴Pb)_t = 18.175–18.411, (²⁰⁷Pb/²⁰⁴Pb)_t = 15.652–15.672 and (²⁰⁸Pb/²⁰⁴Pb)_t = 38.343–38.800. Three quartz-diorite samples have ratios (²⁰⁶Pb/²⁰⁴Pb)_t, (²⁰⁷Pb/²⁰⁴Pb)_t and (²⁰⁸Pb/²⁰⁴Pb)_t of 18.277–18.451, 15.654–15.693 and 38.673–38.846, respectively. These age-calculated lead isotopic data for alkaline granite are similar to those for the analyzed sulfides. Co/Ni ratios for stage II pyrites range from 1.42 to 5.10, indicating that the Yukeng–Banling deposit records the past involvement of magmatic hydrothermal fluids. The isotope data, together with geological, mineralogical and geochronological evidence, favor a primary magmatic source for sulfur and metals in the ore fluids. Mixing of the Cu- and Au-rich fluids with meteoric water led to precipitation of the Cu–Au veins along NW-trending faults.The Yukeng–Banling deposit, the contemporaneous Caomen alkaline granite and Xiaokeng quartz-diorite in the SVB formed under an extensional setting, due to high-angle subduction of the paleo-Pacific plate. The extensional setting facilitated the formation of Cu- and Au-rich magmas which was derived from enriched mantle and lower crust.     

Tourmaline geochemistry and boron isotopic variations as a guide to fluid evolution in the Qiman Tagh W-Sn belt,East Kunlun,China

The Qiman Tagh W-Sn belt lies in the westernmost section of the East Kunlun Orogen, NW China, and is associated with early Paleozoic monzogranites, tourmaline is present throughout this belt. In this paper we report chemical and boron isotopic compositions of tourmaline from wall rocks, monzogranites, and quartz veins within the belt, for studying the evolution of ore-forming fluids. Tourmaline crystals hosted in the monzogranite and wall rocks belong to the alkali group, while those hosted in quartz veins belong to both the alkali and X-site vacancy groups. Tourmaline in the walk rocks lies within the schorl-dravite series and becomes increasingly schorlitic in the monzogranite and quartz veins. Detrital tourmaline in the wall rocks is commonly both optically and chemically zoned,with cores being enriched in Mg compared with the rims. In the Al-Fe-Mg and Ca-Fe-Mg diagrams,tourmaline from the wall rocks plots in the fields of Al-saturated and Ca-poor metapelite, and extends into the field of Li-poor granites, while those from the monzogranite and quartz veins lie within the field of Li-poor granites. Compositional substitution is best represented by the MgFe_(-1), Al(NaR)_(-1), and AlO(Fe(OH))_(-1) exchange vectors. A wider range of δ~(11)B values from -11.1‰ to -7.1‰ is observed in the wall-rock tourmaline crystals, the B isotopic values combining with elemental diagrams indicate a source of metasediments without marine evaporates for the wall rocks in the Qiman Tagh belt. The δ~(11)B values of monzogranite-hosted tourmaline range from -10.7‰ and-9.2‰, corresponding to the continental crust sediments, and indicate a possible connection between the wall rocks and the monzogranite. The overlap in δ~(11)B values between wall rocks and monzogranite implies that a transfer of δ~(11)B values by anataxis with little isotopic fractionation between tourmaline and melts. Tourmaline crystals from quartz veins have δ~(11)B values between -11.0‰ and-9.6‰, combining with the elemental diagrams and geological features, thus indicating a common granite-derived source for the quartz veins and little B isotopic fractionation occurred. Tourmalinite in the wall rocks was formed by metasomatism by a granite-derived hydrothermal fluid, as confirmed by the compositional and geological features.Therefore, we propose a single B-rich sedimentary source in the Qiman Tagh belt, and little boron isotopic fractionation occurred during systematic fluid evolution from the wall rocks, through monzogranite, to quartz veins and tourmalinite.     

Genesis of the Xuebaoding W–Sn–Be Crystal Deposits in Southwest China: Evidence from Fluid Inclusions,Stable Isotopes and Ore Elements

The Xuebaoding crystal deposit, located in northern Longmenshan, Sichuan Province, China, is well known for producing coarse‐grained crystals of scheelite, beryl, cassiterite, fluorite and other minerals. The orebody occurs between the Pankou and Pukouling granites, and a typical ore vein is divided into three parts: muscovite and beryl within granite (Part I); beryl, cassiterite and muscovite in the host transition from granite to marble (Part II); and the main mineralization part, an assemblage of beryl, cassiterite, scheelite, fluorite, apatite and needle‐like tourmaline within marble (Part III). No evidence of crosscutting or overlapping of these ore veins by others suggests that the orebody was formed by single fluid activity. The contents of Be, W, Sn, Li, Cs, Rb, B, and F in the Pankou and Pukouling granites are similar to those of the granites that host Nanling W–Sn deposits. The calculated isotopic compositions of beryl, scheelite and cassiterite (δD, ?69.3‰ to ?107.2‰ and δ¹⁸O_H2O, 8.2‰ to 15.0‰) indicate that the ore‐forming fluids were mainly composed of magmatic water with minor meteoric water and CO₂ derived from decarbonation of marble. Primary fluid inclusions are CO₂? CH₄+ H₂O ± CO₂ (vapor), with or without clathrates and halites. We estimate the fluid trapping condition at T = 220 to 360°C and P > 0.9 kbar. Fluid inclusions are rich in H₂O, F^‐ and Cl^‐. Evidence for fluid‐phase immiscibility during mineralization includes variable L/V ratios in the inclusions and inclusions containing different phase proportions. Fluid immiscibility may have been induced by the pressure released by extension joints, thereby facilitating the mineralization found in Part III. Based on the geochemical data, geological occurrence, and fluid inclusion studies, we hypothesize that the coarse‐grained crystals were formed by: (i) the high content of ore elements and volatile elements such as F in ore‐forming fluids; (ii) occurrence of fluid immiscibility and Ca‐bearing minerals after wall rock transition from granite to marble making the ore elements deposit completely; (iii) pure host marble as host rock without impure elements such as Fe; and (iv) sufficient space in ore veins to allow growth.