海底未固结成岩地层体积密度的估算方法

为了获得无测井或岩心资料地区天然气水合物赋存海域未固结成岩地层的体积密度,对ODP164、ODP204、IODP311航次实际钻探资料进行了分析,统计了体积密度、孔隙度、颗粒密度的分布情况及其相互关系.分析结果表明,水合物赋存的未固结成岩地层孔隙度很高,一般大于40％,在此范围内体积密度主要受到孔隙度制约,而对骨架颗粒...     

Geotechnical properties of deep oceanic sediments recovered from the hydrate occurrence regions in the Ulleung Basin, East Sea, offshore Korea

This study presents comprehensive geotechnical data of the natural marine sediments cored from the hydrate occurrence regions during the Ulleung Basin Gas Hydrate Expedition 1 (UBGH1), East Sea, offshore Korea in 2007. Geotechnical soil index properties of the Ulleung Basin sediments, including grain size distribution, porosity, water content, Atterberg limits, specific gravity, and specific surface area, were experimentally determined. These soil index properties were correlated to geotechnical engineering parameters (e.g., shear strength and friction angle) by using well-known empirical relationships. By performing standard consolidation tests on both undisturbed specimens (as recovered from the original core liner after hydrate dissociation) and remolded specimens, stress-dependent mechanical and hydraulic properties (e.g., compressibility and hydraulic conductivity) were measured. The experimental results provide important engineering parameters, and demonstrate the effect of hydrate presence and consequential dissociation to index properties, engineering parameters, and innate sediment structures.     

Amplitude blanking related to the pore-filling of gas hydrate in sediments

Seismic indicators of gas-hydrate-bearing sediments include elevated interval velocities and amplitude reduction of seismic reflections owing to the presence of gas hydrate in the sediment's pore spaces. However, large amplitude blanking with relatively low interval velocities observed at the Blake Ridge has been enigmatic because realistic seismic models were absent to explain the observation. This study proposes models in which the gas hydrate concentrations vary in proportion to the porosity. Where gas hydrate concentrations are greater in more porous media, a significant amplitude blanking can be achieved with relatively low interval velocity. Depending on the amount of gas hydrate concentration in the pore space, reflection amplitudes from hydrate-bearing sediments can be much less, less or greater than those from corresponding non-hydrate-bearing sediments. This revised version was published online in November 2006 with corrections to the Cover Date.     

Physical properties of sediment from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

This study characterizes cored and logged sedimentary strata from the February 2007 BP Exploration Alaska, Department of Energy, U.S. Geological Survey (BPXA-DOE-USGS) Mount Elbert Gas Hydrate Stratigraphic Test Well on the Alaska North Slope (ANS). The physical-properties program analyzed core samples recovered from the well, and in conjunction with downhole geophysical logs, produced an extensive dataset including grain size, water content, porosity, grain density, bulk density, permeability, X-ray diffraction (XRD) mineralogy, nuclear magnetic resonance (NMR), and petrography.This study documents the physical property interrelationships in the well and demonstrates their correlation with the occurrence of gas hydrate. Gas hydrate (GH) occurs in three unconsolidated, coarse silt to fine sand intervals within the Paleocene and Eocene beds of the Sagavanirktok Formation: Unit D-GH (614.4 m-627.9 m); unit C-GH1 (649.8 m-660.8 m); and unit C-GH2 (663.2 m-666.3 m). These intervals are overlain by fine to coarse silt intervals with greater clay content. A deeper interval (unit B) is similar lithologically to the gas-hydrate-bearing strata; however, it is water-saturated and contains no hydrate.In this system it appears that high sediment permeability (k) is critical to the formation of concentrated hydrate deposits. Intervals D-GH and C-GH1 have average “plug” intrinsic permeability to nitrogen values of 1700 mD and 675 mD, respectively. These values are in strong contrast with those of the overlying, gas-hydrate-free sediments, which have k values of 5.7 mD and 49 mD, respectively, and thus would have provided effective seals to trap free gas. The relation between permeability and porosity critically influences the occurrence of GH. For example, an average increase of 4% in porosity increases permeability by an order of magnitude, but the presence of a second fluid (e.g., methane from dissociating gas hydrate) in the reservoir reduces permeability by more than an order of magnitude.     

海底天然气水合物的地震资料处理与分析

介绍了利用多道反射地震资料，采用反射振幅随炮检距变化AVO（Ampltude versus Offset)技术和其他地震正、反演方法，通过研究地震剖面上的拟海底反射层（BSR）分布、地震弹性参数特征，来探讨BSR上、下方含天然气水合物沉积层和含游离气沉积层的内部结构和某些主要物理性质，如沉积物的空隙率、天然气水合物的饱和度等，由此来评估海底天然气水合物的资源前景并研究其成矿机制。     

Low-amplitude BSRs and gas hydrate concentration on the northern margin of the South China Sea

The passive northern continental margin of the South China Sea is rich in gas hydrates, as inferred from the occurrence of bottom-simulating reflectors (BSR) and from well logging data at Ocean Drilling Program (ODP) drill sites. Nonetheless, BSRs on new 2D multichannel seismic reflection data from the area around the Dongsha Islands (the Dongsha Rise) are not ubiquitous. They are confined to complex diapiric structures and active fault zones located between the Dongsha Rise and the surrounding depressions, implying that gas hydrate occurrence is likewise limited to these areas. Most of the BSRs have low amplitude and are therefore not clearly recognizable. Acoustic impedance provides information on rock properties and has been used to estimate gas hydrate concentration. Gas hydrate-bearing sediments have acoustic impedance that is higher than that of the surrounding sediments devoid of hydrates. Based on well logging data, the relationship between acoustic impedance and porosity can be obtained by a linear regression, and the degree of gas hydrate saturation can be determined using Archie’s equation. By applying these methods to multichannel seismic data and well logging data from the northern South China Sea, the gas hydrate concentration is found to be 3–25% of the pore space at ODP Site 1148 depending on sub-surface depth, and is estimated to be less than values of 5% estimated along seismic profile 0101. Our results suggest that saturation of gas hydrate in the northern South China Sea is higher than that estimated from well resistivity log data in the gas hydrate stability zone, but that free gas is scarce beneath this zone. It is probably the scarcity of free gas that is responsible for the low amplitudes of the BSRs.     

Reflectivity template,a quantitative intercept-gradient AVO analysis to study gas hydrate resources – A case study of Iranian deep sea sediments

Presence of gas hydrate and free gas in Iranian part of Makran accretionary prism changes the elastic properties of unconsolidated sediments and produces sharp bottom simulating reflectors (BSRs) which are observed on the 2-D seismic data. Different methods have been applied to estimate the gas hydrate and free gas saturations in marine sediments based on seismic measurements. Most of these methods are based on relating the elastic properties to the hydrate and free gas saturations and remotely estimating their concentration. In this regard, using the effective medium theory (EMT) which was developed for different modes of hydrate distribution is more considered among other rock physics theories. The main concern about saturation estimations based on EMT is that the velocities of the hydrate-bearing sediments primarily depend on how they are distributed within the pore space. Therefore, understanding the modes of hydrate distribution (at least cementing or non-cementing modes) is necessary to decrease the estimation uncertainties.The first intention of paper is to investigate amplitude variation versus offset (AVO) analysis of BSR to determine the hydrate distribution modes. The results from the probable saturation revealed that if the hydrate cements the sediment grains, BSR would show the AVO class IV and if hydrate does not cement the sediment grains, then BSR would show either the AVO class II or class III depending on the free gas saturation just beneath the BSR. The second intention of paper is to introduce some templates called reflectivity templates (RTs) for quantitative study of hydrate resources. These templates are provided based on the EMT to quantify the hydrate and free gas near the BSR. Validation of this approach by synthetic data showed that a reliable quantification could be achieved by intercept-gradient RTs, only if these attributes are determined with a high accuracy and good assumptions are made about the mineralogical composition and porosity of the unconsolidated host sediments. The results of this approach applied to a 2-D marine pre-stack time migrated seismic line showed that less than 10% of the gas hydrate accumulated near to the BSR in anticlinal-ridge type structure of Iranian deep sea sediments. The free gas saturation near to the BSR by assuming a homogeneous distribution was less than 3% and by assuming patchy distribution was about 3–10%.     

An approach to estimate gas hydrate saturation from 3-D heterogeneous resistivity model: A study from Krishna-Godavari basin,Eastern Indian offshore

A method is proposed to estimate gas hydrate saturation from three dimensional (3-D) heterogeneous model of resistivity simulated using resistivity log. Pure gas hydrates are highly resistive compared to the host sediments, and their presence in the pore space of sediments increase the resistivity of the formation. The anomalous increase of resistivity is used as a proxy for the delineation of gas hydrates using the resistivity log. A 3-D heterogeneous resistivity model has been constructed from one dimensional resistivity log in Krishna Godavari (KG) basin, eastern Indian offshore. The simulated model contains all small scale variation in resistivity of the reservoir and maintains all properties associated with covariance, like root mean square fluctuation, characteristic scales and fractal dimension of the observed log. We have estimated volumetric hydrate saturation using the three dimensional simulated model. The porosity used for estimating hydrate saturation is calculated from the simulated density field generated using the observed density log. Estimated average gas hydrate saturation is about 9.84% of the pore volume over a 1000 m × 1000 m x 131 m cubic meters area.     

Analysis of the Black Sea sediments by evaluating DSDP Leg 42B drilling data for gas hydrate potential

Many gas seepages, temperature, pressure, salinity, anoxic environment and high source gas potential of the Black Sea indicates that the Black Sea might have huge potentials for biogenic and thermogenic gas hydrates. However, the last important parameter to consider gas hydrate as an energy source is the type of sediments. Coarse marine sands are considered as good hydrate reservoirs because of high porosity and high permeability. Only very limited data is available related to the types of lithology of the Black Sea sediments. Hence, in this study, the literature data (especially the drilling and coring data of DSDP Leg 42B program) about gas seepages, temperature gradient, pressure gradient, salinity, anoxic environment and high source gas potential, and the types of the sediments in the Black Sea were investigated and analyzed. Although gas seepages, temperature gradient, pressure gradient, salinity, anoxic environment and high source gas potential of the Black Sea are appropriate for producible gas hydrate reservoirs, the sediments of the Black Sea appear to be generally fine grained with high clay content. Sandy-silt and silty sand layers in turbidites of the Black Sea might be potential producible hydrate reservoirs but these sediments are fine. As well as turbidites, separate thin sand layers might be potential gas hydrate reservoirs as an energy source in the Black Sea.     

State-of-the-Art of Gas Hydrates and Relative Permeability of Hydrate Bearing Sediments

The methane gas production potential from its hydrates, which are solid clathrates, with methane gas entrapped inside the water molecules, is primarily dependent on permeability characteristics of their bearing sediments. Moreover, the dissociation of gas hydrates, which results in a multi-phase fluid migration through these sediments, becomes mandatory to determine the relative permeability of both gaseous and aqueous fluids corresponding to different hydrate saturations. However, in this context, the major challenges are: (1) obtaining undisturbed in-situ samples bearing gas hydrates; and (2) maintenance of the thermodynamic conditions to counter hydrate dissociation. One of the ways to overcome this situation is synthesis of gas hydrates in laboratory conditions, followed by conducting permeability tests on them. In addition, empirical relationships that relate permeability of the gas hydrate bearing sediments to pore-structure characteristics (viz., pore size distribution and interconnectivity) can also be conceived. With this in view, a comprehensive review of the literature dealing with different techniques adopted by researchers for synthesis of gas hydrates, permeability tests conducted on the sediments bearing them, and analytical and empirical correlations employed for determination of permeability of these sediments was conducted and a brief account of the same is presented in this article.     

Microbial community distribution in sediments from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

We studied the microbial communities collected from hydrate-bearing sediments on the North Slope of Alaska to determine how abiotic variables (e.g., grain size, hydrate presence, formation fluid gases) may correspond to the type and distribution of microbes in the sediments. The cores were acquired from sub-permafrost, Eocene (46-55 million year old) sediments in the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well within which hydrates are believed to have formed 1.5 mya. Forty samples, eight of which originally contained hydrates, were acquired from depths of ca. 606-666 m below land surface. Five drilling fluid samples acquired from the same depth range were included in the analysis as a control for possible contamination by drilling fluid microbes during the drilling and handling of cores. DNA was extracted from 15 samples (typically <1 ng DNA/g sediment was recovered) and then amplified using polymerase chain reaction with primers specific for bacterial and archaeal 16S rDNA genes, which indicates the likelihood that microbes were present in all analyzed samples. Only bacterial DNA amplicons were detected. Terminal-restriction fragment length polymorphism (T-RFLP) was used to measure bacterial diversity in the respective samples. Non-metric multidimensional scaling (NMS) was used to determine the abiotic variables that may have influenced bacterial diversity. NMS analysis revealed that the microbial taxa present in the sediment were distinct from the taxa present in the drilling fluids suggesting that the sediments were not contaminated by the drilling fluids. Multi-response permutation procedures (MRPP) found no significant difference between three sample groups identified a priori as being from within a hydrate zone, outside of hydrate zone, or on the edge of a hydrate/non-hydrate zone according to downhole nuclear magnetic resonance spectroscopy logs. However, among the several other abiotic parameters that were evaluated mud gas methane concentration and variables related to hydrate presence (e.g., chloride concentration, salinity, and resistivity) appeared to define the arrangement of microbial community signatures in plots resulting from NMS analysis. Communities from hydrate and non-hydrate layers each contained unique taxa as determined by the T-RFLP assay.     

Gas hydrate formation in compressional,extensional and un-faulted structural settings – Examples from New Zealand's Hikurangi margin

We investigate gas hydrate formation processes in compressional, extensional and un-faulted settings on New Zealand's Hikurangi margin using seismic reflection data. The compressional setting is characterized by a prominent subduction wedge thrust fault that terminates beneath the base of gas hydrate stability, as determined from a bottom-simulating reflection (BSR). The thrust is surrounded by steeply dipping strata that cross the BSR at a high angle. Above the BSR, these strata are associated with a high velocity anomaly that is likely indicative of relatively concentrated, and broadly distributed, gas hydrates. The un-faulted setting—sedimentary infill of a slope basin on the landward side of a prominent thrust ridge—is characterized by a strong BSR, a thick underlying free gas zone, and short positive polarity reflection segments that extend upward from the BSR. We interpret the short reflection segments as the manifestation of gas hydrates within relatively coarse-grained sediments. The extensional setting is a localized, shallow response to flexural bending of strata within an anticline. Gas has accumulated beneath the BSR in the apex of folding. A high-velocity zone directly above the BSR is probably mostly lithologically-derived, and only partly related to gas hydrates. Although each setting shows evidence for focused gas migration into the gas hydrate stability zone, we interpret that the compressional tectonic setting is most likely to contain concentrated gas hydrates over a broad region. Indeed, it is the only setting associated with a deep-reaching fault, meaning it is the most likely of the three settings to have thermogenic gas contributing to hydrate formation. Our results highlight the importance of anisotropic permeability in layered sediments and the role this plays in directing sub-surface fluid flow, and ultimately in the distribution of gas hydrate. Each of the three settings we describe would warrant further investigation in any future consideration of gas hydrates as an energy resource on the Hikurangi margin.     

Variability of the bottom-simulating reflector (BSR) and its association with tectonic structures in the Chilean margin between Arauco Gulf (37°S) and Valdivia (40°S)

Multichannel seismic reflection data recorded between Arauco Gulf (37°S) and Valdivia (40°S), on the Chilean continental margin, were processed and modeled to obtain seismic images and sub-surface models, in order to characterize the variability of the bottom-simulating reflector (BSR), which is a geophysical marker for the presence of gas hydrates. The BSR is discontinuous and interrupted by submarine valleys, canyons, as well as by faults or fractures. The BSR occurrence is more common south of Mocha Island due to moderate slopes and greater organic matter contribution by rivers in that area. Tectonic uplift and structural instability change the stability gas hydrate zone and consequently the BSR position, creating in some cases missing or double BSRs. Our modeling supports the presence of gas hydrate above the BSR and free gas below it. Higher BSR amplitudes support higher hydrate or free gas concentrations. In the study area, gas hydrate concentration is low (an average of 3.5%) suggesting disseminated gas hydrate distribution within the sediments. Also higher BSR amplitudes are associated with thrust faults in the accretionary prism, which serve as conduits for gas flow from deeper levels. This extra gas supply produces a wider thickness of gas hydrates or free gas.     

天然气水合物超声和时域反射联合探测技术

首次将超声探测技术和时域反射技术集成于一个系统中,可实时探测沉积物中水合物饱和度和声学参数。进行了58个轮次的水合物生成与分解实验,超声、时域反射和温压异常3种方法所探测到的生成点、分解点吻合,这说明利用超声技术和时域反射技术联合探测沉积物中水合物的饱和度与声速是十分有效的,将有助于更好地了解含水合物沉积层的物理性质,为海洋天然气水合物的地球物理勘探和资源评价提供基础性参数。     

Potential for gas hydrate formation at the northwest New Zealand shelf margin - New insights from seismic reflection data and petroleum systems modelling

In this study we provide evidence for methane hydrates in the Taranaki Basin, occurring a considerable distance from New Zealand's convergent margins, where they are well documented. We describe and reconstruct a unique example of gas migration and leakage at the edge of the continental shelf, linking shallow gas hydrate occurrence to a deeper petroleum system. The Taranaki Basin is a well investigated petroleum province with numerous fields producing oil and gas. Industry standard seismic reflection data show amplitude anomalies that are here interpreted as discontinuous BSRs, locally mimicking the channelized sea-floor and pinching out up-slope. Strong reverse polarity anomalies indicate the presence of gas pockets and gas-charged sediments. PetroMod™ petroleum systems modelling predicts that the gas is sourced from elevated microbial gas generation in the thick slope sediment succession with additional migration of thermogenic gas from buried Cretaceous petroleum source rocks. Cretaceous–Paleogene extensional faults underneath the present-day slope are interpreted to provide pathways for focussed gas migration and leakage, which may explain two dry petroleum wells drilled at the Taranaki shelf margin. PetroMod™ modelling predicts concentrated gas hydrate formation on the Taranaki continental slope consistent with the anomalies observed in the seismic data. We propose that a semi-continuous hydrate layer is present in the down-dip wall of incised canyons. Canyon incision is interpreted to cause the base of gas hydrate stability to bulge downward and thereby trap gas migrating up-slope in permeable beds due to the permeability decrease caused by hydrate formation in the pore space. Elsewhere, hydrate occurrence is likely patchy and may be controlled by focussed leakage of thermogenic gas. The proposed presence of hydrates in slope sediments in Taranaki Basin likely affects the stability of the Taranaki shelf margin. While hydrate presence can be a drilling hazard for oil and gas exploration, the proposed presence of gas hydrates opens up a new frontier for exploration of hydrates as an energy source.     

Integrated core-log facies analysis and depositional model of the gas hydrate-bearing sediments in the northeastern continental slope,South China Sea

Host sediments may exert a significant influence on the formation of gas hydrate reservoirs. However, this issue has been largely neglected in the literature. In this study, we investigated the types, characteristics and the depositional model of the fine-grained gas hydrate-bearing sediments in the northeastern margin of the South China Sea by integrating core visual observations and logging-while-drilling downhole logs. The gas hydrate-bearing sediments consist dominantly of muddy sediments formed in the inter-canyon ridges of the upper continental slope, including hemipelagites, debrites (mud with breccia) and fine-grained turbidites. Cold-seep carbonates and associated slumping talus, muddy breccia debrites, as well as coarse-grained turbidites, may locally occur. Four classes and six sub-classes of log facies were defined by cluster analysis. Core-log correlation indicates that gas hydrates are majorly distributed in fine-grained sediments with high resistivity and low acoustic transit time (AC) log responses, which are easily differentiated from the fine-grained background sediments of high gamma-ray (GR), high AC, and low resistivity log values, and the seep carbonates characterized by low GR, high resistivity, high density, low AC and low porosity log values. The primary host sediments consist of fine-grained hemipelagic sediments formed by deposition from the nepheloid layers of river material and from the microfossils in seawater column. Most of the hemipelagic sediments, however, might have been extensively modified by slumping and associated gravity flow processes and were re-deposited in the forms of debrites and turbidites. Locally developed seep carbonates associated with gas hydrate dissociation and leakage provided additional sources for the gravity flow sediments.     

Elastic-wave velocity characterization of gas hydrate-bearing fractured reservoirs in a permafrost area of the Qilian Mountain,Northwest China

There are two types of gas hydrate-bearing reservoirs in the permafrost area of Qilian Mountain. Most of the gas hydrates occur mainly in the fractured mudstone reservoirs and rarely in the pores of the sandstone reservoirs. In this study, for the acoustic velocity characterization of the fractured gas hydrate reservoirs of the Qilian Mountain permafrost area, some mudstone core samples were collected for physical rock experiments, such as the acoustic experiment and the porosity and permeability experiment. An acoustic velocity numerical simulation of gas hydrate reservoirs was performed according to the Biot theory and the differential effective medium theory, with the conditions of multiple gas hydrate occurrence models, including the suspension model, the semi-cementation model and the cementation model, and considering both infinite and penny-shaped cracks. Fracture porosity was added to the core samples that only contain matrix porosity. With fracture porosity ranging from 0.01% to 5%, the variation laws between acoustic velocity with fractured porosity and hydrate saturation are obtained: (1) In the case of an infinite crack, if the fractured porosity is 0.01%–1%, the P-wave velocity decreases rapidly in the case of the three occurrence models. If the fractured porosity is higher than 1%, the acoustic velocity decreases gradually. If the crack shape is a penny-shaped crack, the P-wave velocity decreases almost linearly with increasing fracture porosity. (2) If the hydrate occurrence model is the suspension model, the P-wave velocity increases slightly with increasing hydrate saturation. If the occurrence model is the semi-cementation model or the cementation model, when the gas hydrate saturation of the infinite crack ranges from 0 to 80%, the acoustic velocity increases approximately linearly, whereas when the gas hydrate saturation ranges from 80% to 100%, the velocity increases rapidly. If the crack is a penny-shaped crack, the velocity increases almost linearly with increasing gas hydrate saturation from 0 to 100%. (3) It is found that the fractured gas hydrate reservoirs of the Qilian Mountain permafrost area contain both penny-shaped and infinite cracks, of which the infinite crack is the main crack shape. The gas hydrate occurrence in the Qilian Mountain permafrost area mainly follows the suspension model. This has significance for the seismic exploration and log evaluation of gas hydrate-bearing fractured reservoirs in the permafrost area of the Qilian Mountain in studying the acoustic velocity characterization, the crack shapes and occurrence models of gas hydrate reservoirs in the study area.     

Structural-stratigraphic control on the Umitaka Spur gas hydrates of Joetsu Basin in the eastern margin of Japan Sea

Integrated geological, geochemical, and geophysical exploration since 2004 has identified massive accumulation of gas hydrate associated with active methane seeps on the Umitaka Spur, located in the Joetsu Basin on the eastern margin of Japan Sea. Umitaka Spur is an asymmetric anticline formed along an incipient subduction zone that extends throughout the western side of the Japanese island-arc system. Seismic surveys recognized chimney structures that seem strongly controlled by a complex anticlinal axial fault system, and exhibit high seismic amplitudes with apparent pull-up structures, probably due to massive and dense accumulation of gas hydrate. Bottom simulating reflectors are widely developed, in particular within gas chimneys and in the gently dipping eastern flank of the anticline, where debris can store gas hydrates that may represent a potential natural gas resource. The axial fault system, the shape of the anticline, and the carrier beds induce thermogenic gas migration to the top of the structure, and supply gas to the gas hydrate stability zone. Gas reaching the seafloor produces strong seepages and giant plumes in the sea water column.     

Structural-stratigraphic control on the Umitaka Spur gas hydrates of Joetsu Basin in the eastern margin of Japan Sea

Integrated geological, geochemical, and geophysical exploration since 2004 has identified massive accumulation of gas hydrate associated with active methane seeps on the Umitaka Spur, located in the Joetsu Basin on the eastern margin of Japan Sea. Umitaka Spur is an asymmetric anticline formed along an incipient subduction zone that extends throughout the western side of the Japanese island-arc system. Seismic surveys recognized chimney structures that seem strongly controlled by a complex anticlinal axial fault system, and exhibit high seismic amplitudes with apparent pull-up structures, probably due to massive and dense accumulation of gas hydrate. Bottom simulating reflectors are widely developed, in particular within gas chimneys and in the gently dipping eastern flank of the anticline, where debris can store gas hydrates that may represent a potential natural gas resource. The axial fault system, the shape of the anticline, and the carrier beds induce thermogenic gas migration to the top of the structure, and supply gas to the gas hydrate stability zone. Gas reaching the seafloor produces strong seepages and giant plumes in the sea water column.     

用地球化学方法勘查中国南海的天然气水合物

天然气水合物是一种未来新型能源,赋存于低温高压环境下的海洋沉积物中,但也可形成于大陆永久冻土带中。天然气水合物资源量巨大,具有经济和环境上的研究意义。近年来,国际上己对天然气水合物的产况、分布和形成机理开展了大量研究,但国内这方面的工作还刚刚开展。对中国南海的调查表明该区存在天然气水合物赋存的有利地质条件、温压条件和富含有机质的沉积条件。在南海的许多海区还发现了指示天然气水合物存在的地震标志(BSR)。介绍了在南海天然气水合物勘查中的地球化学异常标志。这些地球化学异常的产生可能与天然气水合物的形成或分解过程有关。研究内容包括沉积物中气体含量(主要为甲烷和乙烷),甲烷的碳同位素,孔隙水中阴离子(Cl^-、SO4^2-等)、阳离子(Ca^2 、Mg^2 、Ba^2 、Sr^2 ,B^3 和NH4^ 等)浓度和δ^18,δD,δ^11B,及^87Sr／^86Sr等同位素组成,此外还对海底沉积物的热释光特征和紫外、可见、近红外反射光谱特征开展了探索性研究。通过进一步加强理论和实验研究,结合地球物理和地球化学资料,在不远的将来将会在南海发现和圈定天然气水合物矿藏。