Sedimentary development of the Louisiana continental shelf related to sea level cycles: Part I—sedimentary sequences

Cyclic sequences occur worldwide in nearly every stratigraphic sequence; they are particularly well developed in marine deposits associated with large river systems. Superimposed on those cycles attributed to shifting sites of deposition are those related to high-frequency sea level changes. The large data base for this study (including 471 deep foundation borings, thousands of line kilometers of high-resolution seismic, and sedimentological and dating analyses) represents the most complete information on high-resolution chronostratigraphy and lithostratigraphy that is available on any modern continental shelf/upper slope. These data are used to document sedimentological characteristics and spatial depositional patterns during three complete sea level cycles over the entire continental shelf/upper slope of offshore Louisiana. Sedimentation during periods of high sea level is characterized by: 1) thin, slowly accumulated depositional sequences, referred to as condensed sections, 2) calcareous-rich deposits, including hemipelagic sediments and shell hashes, and 3) wide lateral continuity. Sedimentation during periods of low sea level is characterized by; 1) variable-thickness, rapidly accumulated sequences referred to as expanded sections, 2) coarse-grained elastic deposits, including abundant sands and gravels, and 3) well-defined depositional trends. Even though the data set covers only a short period of geologic time (240 000 yrs), these high frequency events are responsible for the deposition of excellent reservoir-quality facies in well-defined and predictable trends.     

Sedimentary development of the Louisiana continental shelf related to sea level cycles: Part II—seismic response

Cyclic sequences occur worldwide in nearly every stratigraphic sequence; they are particularly well-developed in fluvial and deltaic sediments that have been influenced by high-frequency eustatic sea-level fluctuations. The large data base for this study (including 471 deep foundation borings, thousands of line kilometers of high-resolution seismic, and sedimentological and dating analyses) represents the most complete information on high-resolution chronostratigraphy and lithostratigraphy that is available on any modern continental shelf/upper slope. These data are used to document sedimentological characteristics and high-resolution seismic responses during three complete sea-level cycles over the entire continental shelf/upper slope of offshore Louisiana. Examination of high-resolution seismic records indicates that well-defined, high-amplitude, laterally continuous reflectors correlate with rising and high stand condensed sedimentary sequences and that the deposits laid down during falling and low-stand periods (expanded sections) are characterized by a wide range of acoustic responses. Discontinuous reflectors with high-amplitude variability, continuous parallel reflectors, and chaotic and amorphous zones are common acoustic responses. The association between a particular lithofacies and a specific acoustic response on 3.5-kHz records was found to be very poor.     

Unreciprocated sedimentation along a mud-dominated continental margin,Gulf of Mexico,U.S.A.: Implications for sequence stratigraphy in muddy settings devoid of depositional sequences

According to widely accepted sequence stratigraphic and fill-and-spill models, sedimentary cyclicity along continental margins is modulated by relative sea-level change, whereas smaller-scale intraslope accommodation is controlled by the filling of pre-existing bathymetric depressions. Although these concepts are presumed to apply to shelf-to-slope settings regardless of grain size, we have tested both hypotheses in the mud-prone lower Pliocene to Holocene of offshore Louisiana, Gulf of Mexico, and reach different conclusions. We determine that over the last ∼3.7 Myr, differential accumulation and accompanying salt tectonism dislocated the fine-grained shelf and slope, prevented the development of sedimentary reciprocity at 10–100 kyr time scales, and inhibited fill-and-spill accumulation. We show that only 3% of “lowstand” mass transport deposits can be correlated to low stands in relative sea level, whereas approximately 30% of the deposits are related to transgressions and high stands; the remaining 67% are poorly constrained. Mass transport deposits also show no clear evidence of up-section increases in bypass. Based on our results, we conclude that the dominant control on stratigraphic architecture in offshore Louisiana was not relative sea-level change or patterns of accommodation, but rather differential deposition and concomitant salt-related subsidence, which controlled the distribution of facies, timing and location of mass transport deposits, and rates of sediment accumulation. Our conclusions highlight the importance of sediment supply and local tectonism, and caution against a priori use of conventional sequence stratigraphic and fill-and-spill models to decipher the stratigraphic evolution of actively-deforming mud-dominated continental margins. We therefore recommend treating stratigraphic models as testable hypotheses, rather than as methods of interpretation, particularly in fine-grained areas devoid of well-developed depositional sequences and in settings lacking intraslope ponded-to-perched accumulations.     

Post-Calabrian sequence stratigraphy of the northwestern Alboran Sea (southwestern Mediterranean)

The post-Calabrian sedimentary column of the northwestern Alboran Sea comprises three depositional sequences. The two older depositional sequences are defined by lowstand systems tracts (shelf-margin deltas, slope, base-of-slope, and basin deposits, and the Guadiaro channel-levee complex). In contrast, the most recent depositional sequence also includes transgressive (relict shelf facies) and high-stand (the Guadalmedina-Guadalhorce prodelta and hemipelagic facies) systems tracts. The stratigraphic architecture of these depositional sequences is controlled by the synchronism between high frequency sea-level changes, variations in sediment supply, and sedimentary processes. The configuration of the depositional sequences is variable and their distribution is complex, as a result of the relative importance played by sea-level changes and tectonism through the area.

The sequence boundaries are represented by polygenetic surfaces in the proximal margin, and by monogenetic surfaces in the distal margin and basin. Each polygenetic surface results from the interaction between the sequence boundary with the lowstand erosional truncation surface and the transgressive surface, both developed during the previous sea-level cycle. The monogenetic surfaces correspond to unconformities and their correlative conformities, formed during sea-level lowstands. This pattern of depositional sequences developed in the margin and basin of the northwestern Alboran Sea shows differences with the Exxon Sequence Stratigraphy Model as traditionally applied: sea-level change control is essentially recognized through lowstand systems tracts, and sequence boundary coincides with lowstand erosional truncation surface and transgressive surface, both developed during the previous sea-level cycle.     

High-resolution sequence stratigraphy of clastic shelves V: Criteria to discriminate between stratigraphic sequences and sedimentological cycles

In contrast to high-frequency sequences driven by high-magnitude relative sea-level changes, those controlled by short-term, minor relative sea-level and/or sediment supply changes may be difficult to discriminate from sedimentological cycles (i.e., bedsets) unrelated to shoreline shifts, especially in case of limited outcrop exposures. In fact, meter-scale, fully shallow-marine high-frequency sequences and typical meter-scale bedsets may share a similar, simple facies succession documenting either an upward increase or decrease of event beds. It is therefore necessary to define a set of criteria that allows to discriminate between thin high-frequency sequences and bedsets, based on sedimentological, stratigraphic, micropaleontological, mineralogical and diagenetic data. In particular, the sedimentological and stratigraphic criteria that aid discriminating between high-frequency sequences and bedsets include: 1) occurrence of environmental changes across bounding surfaces; 2) occurrence of water-depth changes across bounding surfaces; 3) physical appearance of bounding surfaces and associated substrate-controlled ichnofacies; 4) lateral extent of bounding surfaces; 5) presence of condensed deposits; 6) cycle thickness; 7) recognition of a set of clinoforms in a regressive shoreface-shelf succession. Moreover, the formation of wave-ravinement surfaces in the shoreface is usually associated with an increase in the percentage of benthic micro-foraminifera specimens documenting energetic conditions, and in the abundance of heavy minerals. Extensive cementation may also be found just below and/or above transgressive surfaces. However, the integration of more than one of the above criteria is necessary to reliably discriminate between sequence stratigraphic surfaces (and therefore high-frequency sequences) and bedset boundaries, the latter being only related to changes of energy level and/or local sediment supply without shoreline shifts. This work is essential to correctly reconstruct the sequence stratigraphic framework of a given succession and to interpret the factors that controlled the cyclicity.     

Seismic and sequence stratigraphy of the central western continental margin of India: late-Quaternary evolution

Seismic and sequence stratigraphic architecture of the central western continental margin of India (between Coondapur and south of Mangalore) has been investigated with shallow seismic data. Seismic stratigraphic analysis defined nine seismic units, that are configured in a major type-1 depositional sequence possibly related to fourth-order eustatic sea-level changes, comprising regressive, lowstand, transgressive and highstand systems tracts. The late-Quaternary evolution of the continental margin took place under the influence of an asymmetric relative fourth-order sea-level cycle punctuated by higher frequency cycles. These cycles of minor order were characterised by rapid sea-level rises and gradual sea-level falls that generated depositional sequences spanning different time scales. During the regressive periods, dipping strata were developed, while erosional surfaces and incised valleys were formed during the lowstands of sea level. Terraces, v-shaped depressions, lagoon-like structures observed on the outer continental shelf are the result of the transgressive period. In the study area we have recognised a complex erosional surface that records a long time span during the relative sea-level fall (regressive period) and the following sea-level lowstand and has been reworked during the last transgression. We also infer that sedimentation processes changed from siliciclastic sedimentation to carbonate sedimentation and again to siliciclastic sedimentation, marking an important phase in the late-Quaternary evolution of the western continental shelf of India. We attribute this to an abrupt climate change at the end of the oxygen isotope stage 2, between the Last Glacial Maximum and the Bølling-Allerod event (14?000 yr BP). This sensitive climate change (warming) favoured the formation of reefs at various depths on the shelf, besides the development of Fifty Fathom Flat, a carbonate platform on the outer shelf off Bombay developed prior to 8300 yr BP. The highstand systems tracts were deposited after the sea level reached its present position.     

The Cosmonaut Sea Wedge

A set of multi-channel seismic profiles (∼15,000 km) is used to study the depositional evolution of the Cosmonaut Sea margin of East Antarctica. We recognize a regional sediment wedge, below the upper parts of the continental rise, herein termed the Cosmonaut Sea Wedge. The wedge is situated stratigraphically below the inferred glaciomarine section and extends for at least 1,200 km along the continental margin with a width that ranges from 80 to about 250 km. The morphology of the wedge and its associated depositional features indicate a complex depositional history, where the deep marine depositional sites were influenced by both downslope and alongslope processes. This interaction resulted in the formation of several proximal depocentres, which at their distal northern end are flanked by elongated mounded drifts and contourite sheets. The internal stratification of the mounded drift deposits indicates that westward flowing bottom currents reworked the marginal deposits. The action of these currents together with sea-level changes is considered to have controlled the growth of the wedge. We interpret the Cosmonaut Sea Wedge as a composite feature comprising several bottom current reworked fan systems. The wide spectrum of depositional geometries in the stratigraphic column reflects dramatic variations in sediment supply from the continental margin as well as varying interaction between downslope and alongslope processes.     

Applying seismic geomorphology to delineate switched sequence stratigraphic architecture in lacustrine rift basins: An example from the Pearl River Mouth Basin,northern South China Sea

Switched sequence stratigraphic architectural units were developed in the Eocene Wenchang Formation stratigraphic section of the Pearl River Mouth Basin (PRMB), northern South China Sea. Utilizing a high-quality 3D seismic data set, well logs and restored paleogeomorphology, the architecture and genesis of switched sequence stratigraphic units have been systematically investigated. The Wenchang Formation, a second-order sequence, can be subdivided into seven third-order sequences (from base to top: SQ1, SQ2, SQ3, SQ4, SQ5, SQ6, and SQ7). The sequence stratigraphic architecture of the Wenchang Formation is characterized by continuous lateral stacking patterns from sequences SQ1 to SQ7. Sequences SQ1–SQ4 mainly developed in the HZ26 sag, whereas sequences SQ5–SQ7 mainly developed in the XJ24 sag. The depositional centres of the Wenchang Formation appear to have migrated from the HZ26 sag to the XJ24 sag-along the northwest direction from sequences SQ1 to SQ7. Multiple tectonic activation episodes or alternating tectonic subsidence of the HZ26 and XJ24 sags resulted in the distinctive geomorphological features that effected the development of the switched sequence stratigraphic architecture in the study area. The switched sequence stratigraphic architecture presented in this study may provide new insights into a better understanding of sequence stratigraphic stacking patterns in continental lacustrine rift basins.     

Late Pleistocene–Holocene seismic stratigraphy of Nha Trang shelf,central Vietnam

The late Pleistocene–Holocene stratigraphic architecture on the steep and narrow shelf off Nha Trang, central Vietnam has been explored by high resolution seismic profiles integrated with sediment core data. Sequence stratigraphic results reveal five major seismic units and three bounding surfaces which are composed of two distinctive sequences. Those sequences are bounded by two regional unconformities (SB1, SB2) which have been formed in respond to different sea-level regimes. The revealed relict beach–ridge deposits at water depth of about ∼130 m below the present water depth indicate that the Last Glacial Lowstand (LGM) sea-level in this area was lower than in neighboring areas and it probably resulted from subsidence due to high sedimentation rate and/or neotectonic movements of the East Vietnam Fault System. The late Pleistocene high amplitude of sea-level change during a long fourth-order and superimposed by shorter fifth-order cycle is the principal factor in reorganizing the formation of the Nha Trang continental shelf sequence. Other local controlling factors as fluctuations in sediment supply, morphological variations of the LGM surface, subsidence rate and hydrodynamic conditions provided the distinctive features of the Nha Trang shelf sequence stratigraphic model in comparison with neighboring other areas.     

Rift sequence stratigraphy

Conventional sequence stratigraphy has been developed primarily for passive-margin basins. Despite the conceptual advances within the last 30 years, a suitable model for rift basins has not yet been devised. Many authors have attempted to adapt the passive-margin model to all other tectonic settings, including rifts, despite the fundamental differences in terms of the mechanisms controlling the formation and evolution of these sedimentary basins. Passive margins have their stratigraphic framework controlled largely by cyclic sea-level fluctuations superimposed on long-term thermal subsidence. By contrast, rift basins have their accommodation history strongly related to their mechanical subsidence regime, with episodic pulses of extension that create space for sediment accumulation at very fast rates. Stages of rapid mechanical subsidence are typically followed by longer periods of tectonic quiescence, when sediment supply gradually consumes and fills the available accommodation. This cyclicity results in depositional sequences that display overall progradational trends and coarsening-upward vertical stacking patterns. Sequence boundaries are often marked by sharp flooding surfaces related to the transgression of lacustrine or marine systems in response to rapid tectonic subsidence and the consequent ‘instantaneous’ generation of accommodation. As such, a typical rift depositional sequence starts with a flooding surface overlain by a relatively thin transgressive systems tract and a much better developed highstand systems tract. A renewed subsidence pulse leads to the drowning of the previous deposits and the start of a new depositional sequence. The strong asymmetry of the base-level curve resembles the shape of glacio-eustatic cycles, with fast transgressions followed by longer term regressions, although at potentially different temporal scales.     

Stratigraphic evolution of Eocene clinoforms from northern Santos Basin,offshore Brazil: Evaluating controlling factors on shelf-margin growth and deep-water sedimentation

In order to assess the controlling factors on the evolution of a shelf margin and the timing of sediment transfer to deep waters, a seismic stratigraphic investigation was carried out in the Eocene interval of northern Santos Basin, offshore Brazil. The studied succession configures a complex of prograding slope clinoforms formed in a passive margin and encompasses five seismic facies and their respective depositional settings: shelf-margin deltas/shorefaces, oblique slope clinoforms, sigmoidal slope clinoforms, continental to shelfal deposits and mass-transport deposits. These are stratigraphically arranged as seven depositional sequences recording a total shelf-edge progradation of about 35 km and a progradation rate of 1,75 km/My. Two main types of sequences can be recognized, the first one (type A) being dominated by oblique slope clinoforms and shelf-margin deltas/shorefaces in which shelf-edge trajectories were essentially flat to descending and extensive sandy turbidites were deposited on the foreset to bottomset zones. Sequences of this type are dominated by forced-regressive units deposited during extensive periods of relative sea-level fall. Type B comprises an upper part represented by aggradational shelfal deposits and a lower part composed of mass-transport deposits and high-relief sigmoidal clinoforms with descending shelf-edge trajectory. Steep slump scars deeply cut the shelfal strata and constitutes the boundary between the two intervals observed in type B sequences. Sandy turbidites occur at the same frequency in both forced- and normal-regressive units but are more voluminous within forced-regressive clinoforms associated with shelf-margin deltas/shorefaces. Major slope failures and mass-transport deposits, by the other hand, occurred exclusively in type B sequences during the onset of sea-level fall and their volume are directly related to the thickness of the shelfal sediments formed during the pre-failure normal regressions.     

Sequence stratigraphy of the Miocene section,southern Gulf of Mexico

This study focuses on the interpretation of stratigraphic sequences through the integration of biostratigraphic, well log and 3D seismic data. Sequence analysis is used to identify significant surfaces, systems tracts, and sequences for the Miocene succession.The depositional systems in this area are dominantly represented by submarine fans deposited on the slope and the basin floor. The main depositional elements that characterize these depositional settings are channel systems (channel-fills, channel-levee systems), frontal splays, frontal splay complexes, lobes of debrites and mass-transport complexes.Five genetic sequences were identified and eleven stratigraphic surfaces interpreted and correlated through the study area. The Oligocene-lower Miocene, lower Miocene and middle Miocene sequences were deposited in bathyal water depths, whereas the upper Miocene sequences (Tortonian and Messinian) were deposited in bathyal and outer neritic water depths. The bulk of the Miocene succession, from the older to younger deposits consists of mass-transport deposits (Oligocene-lower Miocene); mass transport deposits and turbidite deposits (lower Miocene); debrite deposits and turbidite deposits (middle Miocene); and debrite deposits, turbidite deposits and pelagic and hemipelagic sediments (upper Miocene). Cycles of sedimentation are delineated by regionally extensive maximum flooding surfaces within condensed sections of hemipelagic mudstone which represent starved basin floors. These condensed sections are markers for regional correlation, and the maximum flooding surfaces, which they include, are the key surfaces for the construction of the Miocene stratigraphic framework. The falling-stage system tract forms the bulk of the Miocene sequences. Individual sequence geometry and thickness were controlled largely by salt evacuation and large-scale sedimentation patterns. For the upper Miocene, the older sequence (Tortonian) includes sandy deposits, whereas the overlying younger sequence (Messinian) includes sandy facies at the base and muddy facies at the top; this trend reflects the change from slope to shelf settings.     

Sequence stratigraphy and ichnology of Early Cretaceous reservoirs,Gadvan Formation in southwestern Iran

The siliciclastic Gadvan Formation from Abadan Plain, southwestern Iran, is highly bioturbated and allows relationships between changes in ichnocoenoses within a depositional system to be documented and placed in a high-resolution sequence stratigraphic framework. Relying on the sedimentary and ichnological characteristics, the siliciclastic succession is divided into two facies associations: a wave-dominated offshore-shoreface complex and a tide-river influenced delta. The first includes facies that have been deposited in shelf-offshore, upper offshore, lower shoreface and upper/middle shoreface environments, the latter includes facies that have been deposited in prodelta and delta front. Integrated ichnologic and sedimentologic studies of the Gadvan Formation, allow distinction between prodelta and delta front and open marine deposits. With the identification of maximum flooding and ravinement surfaces as bounding surfaces of the stratal units, detailed analysis on systematic changes in the stacking pattern (cycle thickness, cycle type, and facies proportion) are made. Eight ichnocoenoses could be differentiated in the studied sections. The positions of the ichnocoenoses within genetically related stratal units (genetically related ichnocoenoses), indicate three large-scale cycles (DS1 to DS3, from oldest to youngest). The cyclical nature of the Gadvan Formation is attributed to low-amplitude eustasy in greenhouse conditions formed under interaction of eustatic high-frequency cycles and longer term tectonically driven sea-level variations during the long-term transgressive sea-level trend of the early Cretaceous. Stratigraphic architectural style of sequences DS1 to DS3 (which includes scarce evidence of lowstand deposits, partial or total truncation of the HST, and predominance of thick transgressive deposits), is remarkably similar to long-term transgressive sea-level trend of the Early Cretaceous across the Arabian Plate. This study suggests a more relatively seaward position of the siliciclastic successions of the Gadvan Formation of Abadan Plain than the Mesopotamian Basin (upper Zubair Formation equivalent in western Iraq and Kuwait), which would be concordant with the prevailing view of an easterly prograding coastline across the Arabian Plate.This study reveals important sedimentological and ichnological features and permits the development of predictive models for the paleoenvironmental and sequence stratigraphical significance of trace fossil assemblages that can be readily compared or translated to analogous depositional systems worldwide. The ichnological analysis is based on cores and can be especially applied to evaluate the applicability of current ichnological models to the study of Cretaceous reservoirs of western Iraq, Kuwait and western Saudi Arabia.     

Tracking the last sea-level cycle: seafloor morphology and shallow stratigraphy of the latest Quaternary New Jersey middle continental shelf

Seafloor geomorphology and surficial stratigraphy of the New Jersey middle continental shelf provide a detailed record of sea-level change during the last advance and retreat of the Laurentide ice sheet (120 kyr B.P. to Present). A NW–SE-oriented corridor on the middle shelf between water depths of 40 m (the mid-shelf “paleo-shore”) and 100 m (the Franklin “paleo-shore”) encompasses 500 line-km of 2D Huntec boomer profiles (500–3500 Hz), an embedded 4.6 km² 3D volume, and a 490 km² swath bathymetry map. We use these data to develop a relative stratigraphy. Core samples from published studies also provide some chronological and sedimentological constraints on the upper <5 m of the stratigraphic succession.The following stratigraphic units and surfaces occur (from bottom to top): (1) “R”, a high-amplitude reflection that separates sediment >46.5 kyr old (by AMS ¹⁴C dating) from overlying sediment wedges; (2) the outer shelf wedge, a marine unit up to 50 m thick that onlaps “R”; (3) “Channels”, a reflection sub-parallel to the seafloor that incises “R”, and appears as a dendritic system of channels in map view; (4) “Channels” fill, the upper portion of which is sampled and known to represent deepening-upward marine sediments 12.3 kyr in age; (5) the “T” horizon, a seismically discontinuous surface that caps “Channels” fill; (6) oblique ridge deposits, coarse-grained shelly units comprised of km-scale, shallow shelf bedforms; and (7) ribbon-floored swales, bathymetric depressions parallel to modern shelf currents that truncate the oblique ridges and cut into surficial deposits.We interpret this succession of features in light of a global eustatic sea-level curve and the consequent migration of the coastline across the middle shelf during the last 120 kyr. The morphology of the New Jersey middle shelf shows a discrete sequence of stratigraphic elements, and reflects the pulsed episodicity of the last sea-level cycle. “R” is a complicated marine/non-marine erosional surface formed during the last regression, while the outer shelf wedge represents a shelf wedge emplaced during a minor glacial retreat before maximum Wisconsin lowstand (i.e., marine oxygen isotope stage 3.1). “Channels” is a widespread fluvial subarial erosion surface formed at the late Wisconsin glacial maximum 22 kyr B.P. The shoreline migrated back across the mid-shelf corridor non-uniformly during the period represented by “Channels” fill. Oblique ridges are relict features on the New Jersey middle shelf, while the ribbon-floored swales represent modern shelf erosion. There is no systematic relationship between modern seafloor morphology and the very shallowly buried stratigraphic succession.     

Tectono-sequence stratigraphic analysis on Paleogene Shahejie Formation in the Banqiao sub-basin,Eastern China

Tectonics is extremely important to the depositional record preserved in continental sedimentary basins, affecting both the formation of sequence boundaries and the filling characters of these sequences. This comprehensive analysis of Paleogene depositional patterns and the sequence compositional types in the Banqiao sub-basin of the Bohai Basin, Eastern China, shows that episodic rifting and differential activity on major faults have resulted in the formation of various types of transfer zones and structural slope-break zones, both of which played significant roles in the formation and distribution of sequence types and depositional systems. Transfer zones controlled the positions of sediment source areas, entry points for sediment into the basin and, as a result, the development of depositional systems. Structural slope-break zones are paleotopographic features where there is a sharp basinward increase in depositional slope that is controlled by fault geometry. The location of structural slope-break zones influenced the distribution of depositional systems and sand bodies. Areas where the structural slope-break zone overlapped with transfer zones were sites for major drainage systems and the preferred positions of delta fans and turbidite fans. The areas controlled by the transfer zone and the structural slope-break zone with the distribution of sand bodies are the favorable place for the prospecting of subtle stratigraphic traps in the Banqiao sub-basin.     

The link between tectonics and sedimentation in asymmetric extensional basins: Inferences from the study of the Sarajevo-Zenica Basin

The coupled tectonic and depositional history of extensional basins is usually described in terms of stratigraphic sequences linked with the activity of normal faults. This depositional-kinematic interplay is less understood in basins bounded by major extensional detachments or normal fault systems associated with significant exhumation of footwalls. Of particular interest is the link between tectonics and sedimentation during the migration of normal faulting in time and space across the basin. One area where such coupled depositional-kinematic history can be optimally studied is the Late Oligocene - Miocene Sarajevo-Zenica Basin, located in the Dinarides Mountains of Bosnia and Herzegovina. This intra-montane basin recorded Oligocene – Pliocene sedimentation in an endemic and isolated lake environment. We use field kinematic and sedimentological mapping in outcrops correlated with existing local and regional studies to derive a high-resolution evolutionary model of the basin. The novel results demonstrate a close correlation between moments of normal faulting and high-order sedimentological cycles, while the overall extensional basin was filled by a largely uni-directional sediment supply from the neighbouring mountain chain. The migration in time and space of listric NE-dipping normal faults was associated with a gradual shift of the sedimentological environment. Transgressive-regressive cycles reflect sequential displacements on normal faults and their footwall exhumation, defining a new sedimentological model for such basins. This Early - Middle Miocene extension affected the central part of the Dinarides and was associated with the larger opening of the neighbouring Pannonian Basin. The extension was preceded and followed by two phases of contraction. The Oligocene - Early Miocene thrusting took place during the final stages of the Dinarides collision, while the post-Middle Miocene contraction is correlated with the regional indentation of the Adriatic continental unit. This latter phase inverted the extensional basin by reactivating the inherited basal listric detachment.     

黄河三角洲地区末次盛冰期以来浅地层划分与海平面变化的响应

通过对黄河三角洲几个钻孔的分析.将其自上而下划分成3个海相层和3个陆相层,并且划分为1个4级层序(准层序)和4个5级层序。每个层序代表了一次海平面的升降旋回。4级层序的海退沉积与末次冰期的后期对应,海平面下降最大时期是末次冰期最盛期(LGM)的反映。     

Post-Miocene stratigraphy and depositional environments of valley-fill sequences at the mouth of Tampa Bay, Florida

Post-Miocene sea-level low stands allowed rivers and karst processes to incise the exposed carbonate platform along the Gulf Coast of Florida. Few Miocene to mid-Pleistocene deposits survived erosion along the present coast except within incised valleys. Since their formation, these valleys have been filled and incised multiple times in response to sea-level changes. The thick sedimentary sequences underlying the mouth of Tampa Bay have been recorded as a range of depositional environments and multiple sea-level incursions and excursions during pre-Holocene time and subsequent to the accumulation of the Miocene carbonate sequences. Sediment analysis of cores collected from a north–south transect across the mouth of Tampa Bay has enabled the identification of lithofacies, ranging from well-sorted, quartz sand to dense, fossiliferous, phosphatic grainstone. These facies were deposited in freshwater, estuarine, and shallow, open marine environments. As a result of channel development and migration within the paleovalley, and cut-and-fill associated with individual transgressions and regressions, correlation of the lithofacies does not extend across the entire transect. Fining-upward sequences truncated by tidal ravinement surfaces that extend throughout the paleovalley can, however, be identified. Age determinations based on 14-C analysis, amino-acid racemization, and strontium isotope analysis dating of numerous samples yield ages of Miocene, Pliocene, early Pleistocene, and late Pleistocene, as well as Holocene for sequences that accumulated and were preserved in this valley-fill complex. Numerous inconsistencies in the stratigraphic organization of the age determinations indicate that there are bad dates, considerable reworking of shells that were dated, or both. For this reason as well as the lack of detailed correlation among the three relatively complete cores, it is not possible to place these strata in a sequence stratigraphic framework.     

Tectono-stratigraphy of Lower Cretaceous Tanan sub-basin,Tamtsag Basin,Mongolia: Sequence architecture,depositional systems and controls on sediment infill

Tanan sub-basin is an active-fault bounded basin. The spatial distribution and temporal evolution of depositional systems were significantly influenced by tectonics. Fault movement and stages of basin development controlled the subsidence rates and the potential for erosion and the rate of sediment supply. Distinct stages of rift evolution during the early Cretaceous can be recognized, namely the early syn-rift, rift climax and late syn-rift stages. Three types of lacustrine sequence, consisting of distinctive depositional systems, are distinguished: (1) the early syn-rift sequences (SQ1 + SQ2), which are composed mainly of fan delta and shallow lacustrine depositional systems; (2) the rift climax sequences (SQ3) which developed in response to rapid and differential tectonic subsidence rates, and consist of fan delta, deep lacustrine and sublacustrine fan depositional systems; and (3) the late syn-rift sequences (SQ4) which are comprised of braided-delta and shallow lacustrine depositional systems. Each of the three lacustrine sequence architectures stands for a particular stage of basin fill and reflects variable rates of basin subsidence. Within each sequence, depositional systems and their stacking patterns are interpreted to have been a function of the interaction between tectonics and sediment supply. Differential subsidence across the basin, related to rotation of fault blocks, resulted in the formation of distinct paleomorphologies in different structural settings. These settings were fault-scarp zones controlling the development of fan-deltas, fault-terrace zones controlling the development of fan-delta and sublacustrine fans, half-graben dip-slope zones controlling the development of braided river and braided deltas, and intra-basinal fault-break zones controlling the development of sublacustrine fans. During the late syn-rift stage, active tectonism, displacement on the boundary faults had ceased. At this stage the depositional systems and their stacking patterns were dominantly related to the sediment supply rates, and not to tectonic activity.     

Geophysical evidence for cyclic sediment deposition on the southern slope of Qiongdongnan Basin,South China Sea

Gravity flow deposits form a significant component of the stratigraphic record in ancient and modern deep-water basins worldwide. Analyses of high-resolution 3D seismic reflection data in a predominantly slope setting, the southern slope of Qiongdongnan Basin, South China Sea, reveal the extensive presence of gravity flow depositional elements in the Late Pliocene−Quaternary strata. Three key elements were observed: (1) mass transport deposits (MTDs) including slumps and debris flows, (2) turbidity current deposits including distributary channel complexes, leveed channel complexes and avulsion channel complexes, and (3) deep-water drapes (highstand condensed sections). Each depositional element displays a unique seismic expression and internal structures in seismic profiles and attribute maps. Based on seismic characteristics, the studied succession is subdivided into six units in which three depositional cycles are identified. Each cycle exhibits MTDs (slump or debris) at the base, overlain by turbidities or a deep-water drape. The genesis of these cycles is mainly controlled by frequent sea-level fluctuations and high sedimentation rates in the Late Pliocene–Quaternary. Moreover, tectonics, differential subsidence, and paleo-seafloor morphology may have also contributed to their formation processes. The present study is aimed to a better understanding of deep-water depositional systems, and to a successful hydrocarbon exploration and engineering-risk assessment.