Mixed-layer heat advection and entrainment during the sea breeze

A model is developed to simulate the potential temperature and the height of the mixed layer under advection conditions. It includes analytic expressions for the effects of mixed-layer conditions upwind of the interface between two different surfaces on the development of the mixed layer downwind from the interface. Model performance is evaluated against tethersonde data obtained on two summer days during sea breeze flow in Vancouver, Canada. It is found that the mixed-layer height and temperature over the ocean has a small but noticeable effect on the development of the mixed layer observed 10 km inland from the coast. For these two clear days, the subsidence velocity at the inversion base capping the mixed layer is estimated to be about 30 mm s^–1 from late morning to late afternoon. When the effects of subsidence are included in the model, the mixed-layer height is considerably underpredicted, while the prediction for the mean potential temperature in the mixed layer is considerably improved. Good predictions for both height and temperature can be obtained when values for the heat entrainment ratio,c, 0.44 and 0.68 for these two days respectively for the period from 1000 to 1300 LAT, were used. These values are estimated using an equation including the additional effects on heat entrainment due to the mechanical mixing caused by wind shear at the top of the mixed layer and surface friction. The contribution of wind shear to entrainment was equal to, or greater than, that from buoyant convection resulting from the surface heat flux. Strong wind shear occurred near the top of the mixed layer between the lower level inland flow and the return flow aloft in the sea breeze circulation.Symbols c entrainment parameter for sensible heat - c _p specific heat of air at constant pressure, 1010 J kg^–1 K^–1 - d ₁ the thickness of velocity shear at the mixed-layer top, m - Q _H surface sensible heat flux, W m^–2 - u _m mean mixed-layer wind speed, m s^–1 - u _* friction velocity at the surface, m s^–1 - w subsidence velocity, m s^–1 - W subsidence warming,^oC s^–1 - w _e entrainment velocity, m s^–1 - w _* convection velocity in the mixed layer, m s^–1 - x downwind horizontal distance from the water-land interface, m - y dummy variable forx, m - Z height above the surface, m - Z _i height of capping inversion, m - Z _m mixed-layer depth, i.e.,Z _i–Z_s, m - Z _s height of the surface layer, m - lapse rate of potential temperature aboveZ _i, K m^–1 - potential temperature step atZ _i, K - u _h velocity step change at the mixed-layer top - _m mean mixed-layer potential temperature, K     

An aircraft study of turbulence dissipation rate and temperature structure function in the unstable marine atmospheric boundary layer

The dissipation rate of turbulent kinetic energy, , and the temperature structure function parameter, C _T ², have been measured over water from the near surface (Z = 3 m) to the top of the boundary layer. The near surface values of and C _T ² were used to calculate the velocity and temperature Monin-Obukhov scaling parameters u _* and T _*. The data collected during unstable lapse rates were used to evaluate the feasibility of extrapolating the values of and C _T ² as a function of height with empirical scaling formulae. The dissipation rate scaling formula of Wyngaard et al. (l971 a) gave a good fit to an average of the data for Z < 0.8 Z _i. In the surface layer the scaling formula of Wyngaard et al. (1971b) disagreed with the C _T ² values by as much as 50%. This disagreement is due to an unexpected reduction in the measured values of C _T ² forZ < 30 m. At this point it is not clear if the discrepancy is a unique property of the marine boundary layer or if it is simply some unknown instrumental or analytical problem. The mixed layer scaling results were similar to the overland results of Kaimal et al. (1976).     

Airflow over a mountain and the convective boundary layer

In this paper, the analytical model coupling the convective boundary layer (CBL) with the free atmosphere developed by Qi and Fu (1992) is improved. And by this improved model, the interaction between airflow over a mountain and the CBL is further discussed. The conclusions demonstrate: (1) The perturbation potential temperatures in the free atmosphere can counteract the effect of orographic thermal forcing through entraining and mixing in the CBL. If _M > _F , the feedback of the perturbation potential temperatures in the free atmosphere is more important than orographic thermal forcing, which promotes the effect of interfacial waves. If _M < _F , orographic thermal forcing is more important, which makes the interfacial height and the topographic height identical in phase, and the horizontal speeds are a maximum at the top of the mountain. (2) The internal gravity waves propagating vertically in the free atmosphere cause a strong downslope wind to become established above the lee slope in the CBL and result in the hydraulic jump at the top of the CBL. (3) With the CBL deepening, the interfacial gravity waves induced by the potential temperature jump at the top of the CBL cause the airflow in the CBL to be subcritical.     

Parametrization and influence of subgridscale orography in general circulation and numerical weather prediction models

Summary The problem of representing the drag due to subgridscale orography is examined. Results from model simulations are used to illustrate clear deficiencies in the global angular momentum budgets and possible ways of correcting for these deficiencies are considered. It is argued that a formulation for the stress due to subgridscale gravity waves is required, as was first recognized by Boer et al. (1984a, b), and the impact of a scheme based on Palmer et al. (1986) is presented. The scheme is improved by using directionally-dependent subgridscale orographic variances. Results from 90-day integrations using the ECMWF and UKMO models with similar resolutions are very much in accord both with and without a wave drag parametrization scheme; showing much improved wintertime circulations.The relationship between the wave drag and the model orography is examined with the use of idealized stress profiles whereby the wave drag is limited to either near the surface or in the stratosphere. A combination of parametrized wave drag with an envelope orography performs best at this stage of development.Results are presented from a substantial series of ten-day forecast experiments with the ECMWF operational model using mean and (1 ) envelope orographies, these show significant improvements in forecast skill.With 26 Figures     

Diagnosis of mesoscale structures in cases of lee cyclogenesis during ALPEX

Summary Several cases of lee cyclogenesis that occurred during ALPEX-SOP have been analyzed, with the aim of separating the large scale structures from the subsynoptic/meso-a scale features that are characteristic of this meteorological phenomenon. The results presented here are mainly based on composites of the analyzed cases. We assume that the deformation caused by the orography can be, at least to a reasonable extent, isolated from the undisturbed state using scale separation. The analysis technique we employ provides the scale separation as built-in in the interpolation algorithm. The scale separation error due to the large inhomogeneities of the data density distribution is partly corrected using a method described in the text. The orographic disturbance appears in different mesoscale fields as a quasiantisymmetric dipolar structure. For example, high/low pressure, cold/warm temperature and anticyclonic/cyclonic couplets characterize the mesoscale fields near the Alps. A qualitative agreement is found with the structure of the orographically induced perturbations predicted by the normal mode theory of lee cyclogenesis.With 7 Figures     

Three-dimensional modeling of synthetic cold fronts approaching the Alps

Summary A numerical model was used to study the behaviour of prototype cold fronts as they approach the Alps. Two fronts with different orientations relative to the Alpine range have been considered. One front approaches from west, a second one from northwest. The first front is connected with southwesterly large-scale air-flow producing pre-frontal foehn, whereas the second front is associated with westerly largescale flow leading to weak blocking north of the Alps.Model simulations with fully represented orography and parameterized water phase conversions have been compared with control runs where either the orography was cut off or the phase conversions were omitted. The results show a strong orographic influence in case of pre-frontal foehn which warms the pre-frontal air and increases the cross-frontal temperature contrast leading to an acceleration of the front along the northern Alpine rim. The latent heat effect was found to depend much on the position of precipitation relative to the surface front line. In case of pre-frontal foehn precipitation only falls behind the surface front line into the intruding cold air where it partly evaporates. In contrary, precipitation already appears ahead of the front in the case of blocking. Thus, the cooling effect of evaporating rain increases the cross-frontal temperature difference only in the first case causing an additional acceleration of the front.List of symbols C _pd specific heat capacity of dry air at constant pressure (C _pd =1004.71 J kg^–1 K^–1) - C _pv specific heat capacity of water vapour at constant pressure (C _pv =1845.96 J kg^–1 K^–1) - C _f propagation speed of a front - x, y horizontal grid spacing (cartesian system) - , horizontal grid spacing (geographic system) - t time step - E turbulent kinetic energy - f Coriolis parameter - g gravity acceleration (g=9.81 ms^–1) - h terrain elevation - H height of model lid (H=9000 m) - k Karman constant (k=0.4) - K _Mh horizontal exchange coefficient of momentum - K _Hh horizontal exchange coefficient of heat and moisture - K _Mz vertical exchange coefficient of momentum - K _Hz vertical exchange coefficient of heat and moisture - l mixing length - l _c specific condensation heat (l _c =2500.61 kJ kg^–1) - l _f specific freezing heat (l _f =333.56 kJ kg^–1) - l _s specific sublimation heat (l _s =2834.17 kJ kg^–1) - longitude - m ₁,m ₂,m ₃ metric coefficients - p pressure - Exner function - Pr Prandtl number - latitude - _M profile function - q _v specific humidity - q _c specific content of cloud droplets - q _i specific content of cloud ice particles - q _R specific content of rain drops - q _S specific content of snow - R _d gas constant of dry air (R _d =287.06 J kg^–1 K^–1) - R _v gas constant of water vapour (R _v =461.51 J kg^–1 K^–1) - r _E radius of earth (r _E =6371 km) - Ri _F flux Richardson number - density of dry air - t time - T temperature - _dia period of diastrophy - potential temperature - _v virtual potential temperature - _e equivalent potential temperature - U relative humidity - u, v, w cartesian wind components - u _F ,v _F front-normal and front-parallel wind components - x, y, z cartesian coordinates - w ^* transformed vertical wind component - W _R speed of falling rain - W _S speed of falling snow - z ^* transformed vertical coordinate Abbreviations GND (above) ground level - MSL (above) mean sea level With 12 Figures     

Wind structure near a city centre

Wind speed and temperature profiles to a height of 8 m were recorded for 30-, 60-, and 90-min averaging times over a striated snow surface at the geographic South Pole during the austral winter of 1975. A gradient Richardson number was calculated for each averaging time to determine conditions of neutral stability under which the logarithmic wind law would hold. A log-linear regression technique was used to determine values of aerodynamic roughness height (Z ₀) for those profile averages recorded in conditions of neutral stability. A plot of Z ₀ as a function of average wind direction revealed a variation in Z ₀ of almost three orders of magnitude, from 0.01 to 7 cm, over 120 deg of wind direction. A simple model is presented to justify the fact that aerodynamic roughness is a function of wind direction and erosion history.     

Parametrization of orographical effects in the planetary boundary layer

Studies of the influence of orography on the dynamics of atmospheric processes usually assume the following relation as a boundary condition at the surface of the Earth, or at the top of the planetary layer: $$w = u\frac{{\delta z_0 }}{{\delta x}} + v\frac{{\delta z_0 }}{{\delta y}}$$ where u, v and w are the components of wind velocity along the x, y and z axes, respectively, and z ₀ = z₀(x, y) is the equation of the Earth's orography. We see that w, and consequently the influence of orography on the dynamics of atmospheric processes, depend on the wind (u, v) and on the slope of the obstacle (δz ₀/δx, δz₀/δy). In the present work, it is shown that the above relation for w is insufficient to describe the influence of orography on the dynamics of the atmosphere. It is also shown that the relation is a particular case of the expression: $$\begin{gathered} w_h = \left| {v_g } \right|\left[ {a_1 (Ro,s)\frac{{\delta z_0 }}{{\delta x}} + a_2 (Ro,s)\frac{{\delta z_0 }}{{\delta y}}} \right] + \hfill \\ + \frac{{\left| {v_g } \right|^2 }}{f}\left[ {b_1 (Ro,s)\frac{{\delta ^2 z_0 }}{{\delta x^2 }} + b_2 (Ro,s)\frac{{\delta ^2 z_0 }}{{\delta y^2 }} + b_3 (Ro,s)\frac{{\delta ^2 z_0 }}{{\delta x\delta y}}} \right] \hfill \\ \end{gathered} $$ where ¦vv _g¦ is the strength of the geostrophic wind, a ₁, a₂, b₁, b₂, b₃ are functions of Rossby number Ro and of the external stability parameter s. The above relation is obtained with the help of similarity theory, with a parametrization of the planetary boundary layer. Finally, the authors show that a close connection exists between the effects described by the above expression and cyclo- and anticyclogenesis.     

On the log-linear wind profile and the relationship between shear stress and stability characteristics over the sea

Wind and stability characteristics in the atmospheric surface boundary layer at a height,Z, less than 20 m above the sea were examined in nine oceanic investigations. The analysis lends further support to the utility of the log-linear wind-profile law in the stability region of –0.4Z/L0.9, whereL is the Monin-Obukhov length. However, it is also shown that, inasmuch as better than 90% of the measurements fall within the range of ¦Z/L¦ 0.25, and inasmuch as this correction to the drag coefficient under neutral conditions amounts to less than 10%, the familiar logarithmic wind law may be used rather than the log-linear form. A wind-stress drag coefficient,C _d (=1.2×10^–3 between 1.0 m Z 18.3 m), is thus recommended for general deepwater oceanic applications. The situation over shallow water, which is different, is discussed briefly.     

An observational study of the structure of the nocturnal urban boundary layer

The formation mechanism of the nocturnal urban boundary layer (UBL), especially in the winter nighttime, was investigated based on the extensive field observations conducted during November 1984 in Sapporo, Japan. A strong, elevated inversion formed over the Sapporo urban area and the inversion base height was approximately twice the average building height. Velocity fluctuations _u, _w and Reynolds stress % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaWaa0aaaeaaca% WG1bWaaWbaaSqabeaacaaIXaaaaGGaaOGae8hiaaIaam4DamaaCaaa% leqabaGaaGymaaaaaaaaaa!3A9C!\[\overline {u^1 w^1 } \] had nearly uniform profiles within the nocturnal UBL and decreased with height above the UBL. On the other hand, temperature fluctuations _t , and heat fluxes % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaWaa0aaaeaaca% WG1bWaaWbaaSqabeaacaaIXaaaaGGaaOGae8hiaaIaeqiUde3aaWba% aSqabeaacaaIXaaaaaaaaaa!3B56!\[\overline {u^1 \theta ^1 } \] and % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaWaa0aaaeaaca% WG3bWaaWbaaSqabeaacaaIXaaaaGGaaOGae8hiaaIaeqiUde3aaWba% aSqabeaacaaIXaaaaaaaaaa!3B58!\[\overline {w^1 \theta ^1 } \] had peaks at the inversion base and small values within the nocturnal UBL. The turbulent kinetic energy budget showed that the turbulent transport term and shear generation from urban canopy elements are important in the nocturnal UBL development; the role of the buoyancy term is small. The turbulence data analysis and application of a simple advective model showed that the mechanism of UBL formation may be controlled by the downward transport of sensible heat from the elevated inversion caused by mechanically-generated turbulence.Nomenclature g accelaration due to gravity, m s^-2 - k turbulent kinetic energy, m² s^-1 - K _m eddy viscosity, m² s^-1 - L Monin-Obukhov lenght, m - p pressure, Kg m^-2 - U, V, W mean wind speed in the downwind, crosswind, and vertical directions, respectively, m s^-1 - u ¹, w ¹ wind speed fluctuation in the downwind and vertical direction, respectively, m s^-1 - u ₁ friction velocity, m s^-1 - % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaWaa0aaaeaaca% WG1bWaaWbaaSqabeaacaaIXaaaaGGaaOGae8hiaaIaam4DamaaCaaa% leqabaGaaGymaaaaaaaaaa!3A9C!\[\overline {u^1 w^1 } \] momentum flux, m²s^-2 - % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaWaa0aaaeaaca% WG1bWaaWbaaSqabeaacaaIXaaaaGGaaOGae8hiaaIaam4DamaaCaaa% leqabaGaaGymaaaaaaaaaa!3A9C!\[\overline {u^1 \theta^1 } \] sensible heat flux, m²s^-1°C - WD wind direction, deg - WS wind speed, m s^-1 - z altitude, m - Z _h inversion base height, m - Z _j wind maximum height, m - Z _t inversion top height, m - T _u-r heat island intensity, °C - temperature lapse rate at rural site, °C m^-1 - energy dissipation rate, m²s^-3 - ¹ Potential temperature fluctuation, °C - _* scaling temperature, (=-% MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaWaa0aaaeaaca% WG1bWaaWbaaSqabeaacaaIXaaaaGGaaOGae8hiaaIaeqiUde3aaWba% aSqabeaacaaIXaaaaaaaaaa!3B56!\[\overline {u^1 \theta ^1 } \]/u_*) °C - mean potential temperature fluctuation, K - density of air, Kgm^-3 - K von Kármán constant (=0.4) - _u, _v, _w standard deviation of wind speed in the downwind, crosswind, and vertical directions, respectively, m s^-1 - standard diviation of temperature, °C     

Estimation of abl Parameters Using the Vertical Velocity Measurements of an Acoustic Sounder

The friction velocity, the surface heat flux and the height of the Atmospheric Boundary Layer (ABL) are important parameters. In this work, vertical velocity variance ( _w ² ) and wind velocity structure parameter (C _v ² ) profiles estimated by acoustic sounder measurements are used, along with similarity relations, to estimate these parameters in the unstable Atmospheric Boundary Layer and the friction velocity in the stable one. The data were collected by two acoustic sounders with different height range and resolution under various atmospheric conditions (stability) and at two experimental sites in different terrain. The C _v ² profiles are estimated using gate difference of the vertical velocity measurements and the assumption of local isotropy. The vertical velocity data are corrected for the significant effects of noisy measurements and sampling volume averaging on the _w ² and C _v ² estimations using original techniques that are presented in this work. The results of the similarity method using acoustic sounder data are compared against estimates of the corresponding atmospheric parameters obtained from direct measurements. The comparison confirms the ability of the method to provide reasonably accurate estimates of these parameters especially in the middle of the day.     

Effect of finite sampling on atmospheric spectra

The effect of a finite averaging time on variances is well known, but its effect on power spectra is less clearly understood. We present numerical solutions for the spectral distortion arising from sampling over a finite time interval T and show that the commonly used filter function (1 – sinc²f T), valid for variances, is a reasonable approximation for power spectra only when T 10 _m , where f is the cyclic frequency, and _m is the dominant time scale of the process. Our results exhibit an increasingly steeper low-frequency roll-off as T decreases relative to _m , indicating that the measured spectrum is subject to a greater suppression of the lower frequencies (f > 1/T) than predicted by (1 – sinc²f T). This suppression is, in a sense, compensated by an overestimation of spectral estimates in the frequency range f 1/T.     

On gas fluxes from small lakes and ponds

A semi-empirical model for estimating gas fluxes at the air-water interface in a neutrally stratified atmosphere is presented. Gas transfer velocity is assumed to depend on local friction velocity, whose variation with over-water fetch is estimated from Walmsleyet al.'s (1989) Guidelines. As guidance for limnologists estimating CO₂ and CH₄ fluxes from lakes and ponds in the Hudson Bay Lowlands region, we present model results of the variation of gas transfer velocity with over-water fetch,k(x), for comparison with the customary constant valuek ₀. Gas fluxes are estimated over well mixed, circular and elliptical lakes and ponds. The results of accounting for fetch dependence, wind direction, pond shapes and sizes lead to correction factors to fluxes obtained withk ₀. Recent studies of gas transfer velocity for gases of low solubility from lakes are reviewed, and the problem of time averaging on quantities determined from experimental measurements is also discussed.     

Estimates of sensible heat flux from observations of temperature fluctuations

Comparisons between sensible heat flux measured using eddy correlation instrumentation and estimated using the temperature fluctuation method are presented for four types of surface in West Africa. Agreement between measured and estimated values is good. Regression of estimated on measured sensible heat flux gave a mean slope of 0.98 with a mean r ² of 0.94 for bare soil, mature millet, fallow savannah and tiger bush. Estimates of heat flux from temperature fluctuations measured by an instrument mounted beneath a tethered balloon are also shown to be in close agreement with eddy correlation measurements made at the surface (regression slope = 0.98, r ² = 0.84). The results provide evidence that the ratio /_×is indeed a universal function of z/L for all the surface types considered.     

A study of the seasonal migration of ITCZ and the quasi-periodic oscillations in a simple monsoon system using an energy balance model

Summary A zonally averaged global energy balance model with feedback mechanisms was constructed to simulate (i) the poleward limits of ITCZ over the continent and over the ocean and (ii) a simple monsoon system as a result of differential heating between the continent and the ocean. Three numerical experiments were performed with lower boundary as (1) global continent, (2) global ocean and (3) continent-ocean, with freezing latitudes near the poles. Over the continent, midlatitude deserts were found and the ITCZ migrates 25° north and south with seasons. Over a global swamp ocean results do not show migration of ITCZ with time but once the ocean currents are introduced the ITCZ migrates 5° north and south with seasons. It was found that the seasonal migration of ITCZ strongly depends on the meridional distribution of the surface temperature. It was also found that continent influences the location of the oceanic ITCZ. In the tropics northward progression of quasi-periodic oscillations called events are found during the pre- and post-monsoon periods with a period of 8 to 15 days. This result is consistent with the observed quasi-periodic oscillations in the tropical region. Northward propagation of the surface temperature perturbation appears to cause changes in the sensible heat flux which in turn causes perturbations in vertical velocity and latent heat flux fields.List of Symbols vertical average - ₀ zonal average - vertical mean of the zonal average - _0s zonal average at the surface - _0a zonal average at 500 mb level - latitude We now define the various symbols used in the model rate of atmospheric heating due to convective cloud formation (K/sec) - dp/dt (N/m²/sec) - density - potential temperature (K) - rate of rotation of the earth (rad/sec) - empirical constant - humidity mixing ratio - ^* saturated humidity mixing ratio - opacity of the atmosphere - ₁,₂ factors for downward and upward effective black body long wave radiation from the atmosphere - Stefan-Boltzmann constant - emissivity of the surface - _D subsurface temperature (K) - a specific volume - _0xs ,_0ys eastward and northward components of surface frictional stress - ^* vertical velocity at the top of the boundary layer (N/m²/sec) - P Thickness of the boundary layer (mb) - nondimensional function of pressure - P pressure - P _a pressure of the model atmosphere (N/m²) - P _s pressure at the surface (N/m²) - t time (sec) - U eastward wind speed (m/sec) - V northward wind speed (m/sec) - surface water availability - T absolute temperature (K) - heat addition due to water phase changes - g acceleration due to gravity (m²/sec) - a radius of the earth (m) - R gas constant for dry air (J/Kg/K) - C _p specific heat of air at constant pressure (J/Kg/K) - k R/C _p - L latent heat of condensation (J/Kg) - f coriolis parameter (rad/sec) - H _s H _0s ⁽¹⁾ +H _0s ⁽²⁾ +H _0s ⁽³⁾ +H _0s ⁽⁴⁾ +H _0s ⁽⁵⁾ (J/m²/Sec)=sum of the rates of vertical heat fluxes per unit surface area, directed toward the surface - H _a H _0a ⁽¹⁾ +H _0a ⁽²⁾ +H _0a ⁽³⁾ +H _0a ⁽⁴⁾ (J/m²/Sec)=sum of the rates of heat additions to the atmospheric column per unit horizontal area by all processes - H _0s ⁽¹⁾ ,H _0a ⁽¹⁾ heat flux due to short wave radiation - H _0s ⁽²⁾ ,H _0a ⁽²⁾ heat flux due to long wave radiation - H _0s ⁽³⁾ ,H _0a ⁽³⁾ heat flux due to small scale convection - H _0s ⁽⁴⁾ heat flux due to evaporation - H _0a ⁽⁴⁾ heat flux due to condensation - H _0s ⁽⁵⁾ heat flux due to subsurface conduction and convection - e ^* saturation vapor pressure - R solar constant (W/m²) - r _a albedo of the atmosphere - r _s albedo of the surface - b ₂ empirical constant (J/m²/sec) - c ₂ empirical constant (J/m²/sec) - e ₂ nondimensional empirical constant - f ₂ empirical constant (J/m₂/sec) - factor proportional to the conductive capacity of the surface medium - a _s constant used in Sellers model - b _s positive constant of proportionality used in the Sellers model (kg m²/J/sec²) - K _HT coefficient for eddy diffusivity of heat (m²/sec) - K _HE exchange coefficient for water vapor (m²/sec) - h depth of the water column (m) - z height (m) - V _0ws meridional component of surface current (m/sec) - n cloud amount - G _0,n long wave radiation form the atmosphere for cloud amount n (W/m²) - B ₀ long wave radiation from the surface (W/m²) - S _0,n short wave radiation from the atmosphere for cloud amount n (W/m²) - A _n albedo factor for a cloud amount n - R _f1 large scale rainfall (mm/day) - R _f2 small scale rainfall (mm/day) With 22 Figures     

Microwave vegetation optical depth and inverse modelling of soil emissivity using Nimbus/SMMR satellite observations

Summary A radiative transfer model has been used to determine the large scale effective 6.6 GHz and 37 GHz optical depths of the vegetation cover. Knowledge of the vegetation optical depth is important for satellite-based large scale soil moisture monitoring using microwave radiometry. The study is based on actual observed large scale surface soil moisture data and observed dual polarization 6.6 and 37 GHz Nimbus/SMMR brightness temperatures over a 3-year period. The derived optical depths have been compared with microwave polarization differences and polarization ratios in both frequencies and with Normalized Difference Vegetation Index (NDVI) values from NOAA/AVHRR. A synergistic approach to derive surface soil emissivity from satellite observed brightness temperatures by inverse modelling is described. This approach improves the relationship between satellite derived surface emissivity and large scale top soil moisture fromR ²=0.45 (no correction for vegetation) toR ²=0.72 (after correction for vegetation). This study also confirms the relationship between the microwave-based MPDI and NDVI earlier described and explained in the literature.List of Symbols f frequency [Hz] - f _i(p) fractional absorption at polarizationp - h surface roughness - h h cos² - H horizontal polarization - n _i complex index of refraction - p polarization (H orV) - R _s microwave surface reflectivity - T _B(p) brightness temperature at polarizationp - T ^* normalized brightness temperature - T polarization difference (T _v-T _H) - T _s temperature of soil surface - T _c temperature of canopy - T _max daily maximum air temperature - T _min daily minimum air temperature - V vertical polarization - soil moisture distribution factor; also used for the constant to partition the influence of bound and free water components to the dielectric constant of the mixture - empirical complex constant related to soil texture - microwave transmissivity of vegetation (=e ^–) - ^* effective transmissivity of vegetation (assuming =0) - microwave emissivity - _s emissivity of smooth soil surface - _rs emissivity of rough soil surface - _vs emissivity of vegetated surface - soil moisture content (% vol.) - K dielectric constant [F·m^–1] - K _fw dielectric constant of free water [F·m^–1] - K _ss dielectric constant of soil solids [F·m^–1] - K _m dielectric constant of mixture [F·m^–1] - K _o permittivity of free space [8.854·10^–12 F·m^–1] - high frequency limit ofK _wf [F·m^–1] - wavelength [m] - incidence angle [degrees from nadir] - polarization ratio (T _H/T _V) - b soil bulk density [gr·cm^–3] - s soil particle density [gr·cm^–3] - R surface reflectivity in red portion of spectrum - NIR surface reflectivity in near infrared portion of spectrum - _eff effective conductivity of soil extract [mS·cm^–1] - vegetation optical depth - _6.6 vegetation optical depth at 6.6 GHz - ₃₇ vegetation optical depth at 37 GHz - ^* effective vegetation optical depth (assuming =0) - single scattering albedo of vegetation With 12 Figures     

Atmospheric dispersion in the arctic: Winter-time boundary-layer measurements

The winter-time arctic atmospheric boundary layer was investigated with micrometeorological and SF₆ tracer measurements collected in Prudhoe Bay, Alaska. The flat, snow-covered tundra surface at this site generates a very small (0.03 cm) surface roughness. The relatively warm maritime air mass originating over the nearby, partially frozen Beaufort Sea is cooled at the tundra surface resulting in strong (4 to 30 °C · (100 m)^-1) temperature inversions with light winds and a persistent weak (1 to 2 °C · (100 m)^-1) surface inversion with wind speeds up to 17 m s^-1. The absence of any diurnal atmospheric stability pattern during the study was due to the very limited solar insolation. Vertical profiles were measured with a multi-level mast from 1 to 17 m and with a Doppler acoustic sounder from 60 to 450 m. With high wind speeds, stable layers below 17 m and above 300 m were typically separated by a layer of neutral stability. Turbulence statistics and spectra calculated at a height of 33 m are similar to measurements reported for non-arctic, open terrain sites and indicate that the production of turbulence is primarily due to wind shear. The distribution of wind direction recorded at 1 Hz was frequently non-Gaussian for 1-hr periods but was always Gaussian for 5-min periods. We also observed non-Gaussian hourly averaged crosswind concentration profiles and assume that they can be modeled by calculating sequential short-term concentrations, using the 5-min standard deviation of horizontal wind direction fluctuations () to estimate a horizontal dispersion coefficient ( _y ), and constructing hourly concentrations by averaging the short-term results. Non-Gaussian hourly crosswind distributions are not unique to the arctic and can be observed at most field sites. A weak correlation between horizontal ( _v ) and vertical ( _w ) turbulence observed for both 1-hr and 5-min periods indicates that a single stability classification method is not sufficient to determine both vertical and horizontal dispersion at this site. An estimate of the vertical dispersion coefficient, _z , could be based on or a stability classification parameter which includes vertical thermal and wind shear effects (e.g., Monin-Obukhov length, L).     

Three-dimensional modeling of synthetic cold fronts interacting with northern Alpine foehn

Summary The effect of the Alpine orography on prototype cold fronts approaching from the west is investigated by three-dimensional numerical model simulations. The numerical experiments cover a range of parameter constellations which govern the prefrontal environment of the front. Especially, the appearance and intensity of prefrontal northern Alpine foehn varies from case to case.The behaviour of a cold front north of the Alps depends much on the prefrontal condition it encounters. It is found that prefrontal foehn can either accelerate or retard the approaching front.An important feature is the pressure depression along the northern Alpine rim that results from the southerly foehn flow. In cases where this depression compensates the eastward directed pressure gradient associated with the largescale flow, the front tends to accelerate and the foehn breaks down as soon as the front passes. In contrast, the foehn prevents the front from a rapid eastward propagation if it is connected with a strong southerly wind component.No-foehn experiments are performed for comparison, where either the mountains are removed, or the static stability is set to neutral. Also shown are effects of different crossfrontal temperature contrasts.List of Symbols c _F propagation speed of a front - x, y horizontal grid spacing (cartesian system) - , horizontal grid spacing (geographic system) - t time step - z vertical grid spacing (cartesian system) - cross-frontal potential temperature difference - _i potential temperature step at an inversion - E turbulent kinetic energy - f Coriolis parameter - FGP frontogenesis parameter (see section 2.2) - g gravity acceleration (g=9.81 m s^–2) - vertical gradient of potential temperature - h terrain elevation (above MSL) - h _i height of an inversion (h _i =1000 m MSL) - H height of model lid (H=9000 m MSL) - K _M exchange coefficient of momentum - K _H exchange coefficient of heat and moisture - longitude - N Brunt-Väisäla-frequency - p pressure - Exner function (=T/) - latitude - q _v specific humidity - R _d gas constant of dry air (R _d =287.06 J kg^–1 K^–1) - density of dry air - t time - T temperature - potential temperature - TFP thermal front parameter (see section 2.2) - u, v, w cartesian wind components - u _g ,v _g geostrophic wind components - horizontal wind vector - x, y, z cartesian coordinates Abbreviations GND (above) ground level - MSL (above) mean sea level - UTC universal time coordinated With 20 Figures     

Displaced-Beam Small Aperture Scintillometer Test. Part I: The Wintex Data-Set

The friction velocity (u_*) and the sensible heat flux density (H) determined with a displaced-beam small aperture scintillometer (DBSAS) and a hot-film eddy correlation system are compared. Random errors in the DBSAS are relatively small, compared to scatter found with two eddy-correlation systems. Assuming that the hot-film system yields the true fluxes, theDBSAS appears to overestimate u_* when u_* is less than 0.2 m s^-1 and to underestimate u_* at high wind speeds. This implies that the DBSAS measurements of theinner scale length of turbulence, l₀, a direct measure for the dissipation rate of kinetic turbulent energy, are biased. Possible causes for these results are discussedin detail. A correction procedure is presented to account for effects of random noise and of so-called inactive turbulence or sensor vibrations. The errors in u_* cause errors in the DBSAS measurements of the structure parameter of temperature C_T ². The derived H appears to be less sensitive to errors in l₀ and C_T ², because errors in these quantities tend to cancel out.     

Equatorial disturbances,monsoons, and 1982–1983 ENSO

Summary Interannual modes are described in terms of three-month running mean anomaly winds (u,v), outgoing longwave radiation (OLR), and sea surface temperature (T _* ). Normal atmospheric monsoon circulations are defined by long-term average winds (u _n,v _n) computed every month from January to December. Daily winds are grouped into three frequency bands, i.e., 30–60 day filtered winds (u _L,v _L); 7–20 day filtered winds (u _M,v _M); and 2–6 day filtered winds (u _S,v _S). Three-month running mean anomaly kinetic energy (signified asK _L , K _M , andK _S , respectively) is then introduced as a measure of interannual variation of equatorial disturbance activity. Interestingly, all of theseK _L , K _M , andK _S perturbations propagate slowly eastward with same phase speed (0.3 ms^–1) as ENSO modes. Associated with this eastward propagation is a positive (negative) correlation between interannual disturbance activity (K _L , K _M , K _S ) and interannualu (OLR) modes. Namely, (K _L , K _M , K _S ) becomes more pronounced than usual nearly simultaneously with the arrival of westerlyu and negativeOLR (above normal convection) perturbutions. In these disturbed areas with (K _L , K _M , K _S >0), upper ocean mixing tends to increase, resulting in decreased sea surface temperature, i.e.T _* 0. Thus, groups (not individual) of equatorial disturbances appear to play an important role in determiningT _* variations on interannual time scales. HighestT _* occurs about 3 months prior to the lowestOLR (convection) due primarily to radiational effects. This favors the eastward propagation of ENSO modes. The interannualT _* variations are also controlled by the prevailing monsoonal zonal windsu _n, as well as the zonal advection of sea surface temperature on interannual time scales. Over the central Pacific, all of the above mentioned physical processes contribute to the intensification of eastward propagating ENSO modes. Over the Indian Ocean, on the other hand, some of the physical processes become insignificant, or even compensated for by other processes. This results in less pronounced ENSO modes over the Indian Ocean.With 10 FiguresContribution No. 89-6, Department of Meteorology, University of Hawaii, Honolulu, Hawaii.