Structural investigations,high temperature behavior and phase transition of Na6Ca4(SO4)6F2

Polycrystalline material of a sulfate apatite with chemical composition Na₆Ca₄(SO₄)₆F₂ or (Na₂Ca₄)Na₄(SO₄)₆F₂ has been synthesized by solid state reactions. Basic crystallographic data are as follows: hexagonal symmetry, a?=?9.3976(1) Å, c?=?6.8956(1) Å, V?=?527.39(1) ų, Z?=?1, space group P6₃/m. For structural investigations the Rietveld method was employed. Thermal expansion has been studied between 25 and 600 °C. High temperature (HT) powder diffraction data as well as thermal analysis indicate that the apatite-type compound undergoes a reconstructive phase transition in the range between 610 and 630 °C. Single-crystals of the HT-polymorph were directly grown from the melt. Structural investigations based on single-crystal diffraction data of the quenched crystals performed at ?100 °C showed orthorhombic symmetry (space group Pna2₁) with a?=?12.7560(8) Å, b?=?8.6930(4) Å, c?=?9.8980(5) Å, V?=?1097.57(10) ų and Z?=?2. Unit cell parameters for a quenched polycrystalline sample of the HT-form obtained at ambient conditions from a LeBail-fit are as follows: a?=?12.7875(1) Å, b?=?8.7255(1) Å, c?=?9.9261(1) Å, V?=?1107.53(2) ų. The lattice parameters of both modifications are related by the following approximate relationships: a _HT?≈?2c _RT, b _HT?≈?-(½a _RT?+?b _RT), c _HT?≈?a _RT. The HT-modification is isotypic with the corresponding potassium compound K₆Ca₄(SO₄)₆F₂. The pronounced disorder of the sulphate group even at low temperatures has been studied by maximum entropy calculations. Despite the first-order character of the transformation clusters of sulfate groups surrounding the fluorine anions can be identified in both polymorphs. Each of the three next neighbor SO₄-tetrahedra within a cluster is in turn surrounded by 8–9 M-cations (M: Na,Ca) defining cage-like units. However, in the apatite structure the corresponding three tricapped trigonal prisms are symmetry equivalent. Furthermore, the central fluorine atom of each cluster is coordinated by three next M-neighbors (FM₃-triangles), whereas in the HT-polymorph a four-fold coordination is observed (FM₄-tetrahedra).     

Hydrogen bonding interactions in phase A [Mg7Si2O8(OH)6] at ambient and high pressure

Neutron powder diffraction data of phase A (Mg₇Si₂O₈(OH)₆) were collected at ambient pressure and 3.2?GPa (calculated from the compressibility of phase A) from the deuterated compound, and the structure was refined using the Rietveld method. The derived crystal structure implies that hydrogen atoms occupy two distinct sites in phase A, both forming hydrogen bonds of different lengths with the same oxygen atom. This picture is supported by IR spectra, which exhibit two absorption bands at 3400 and 3513?cm^?1 corresponding to OH stretching vibrations, and proton NMR spectra, which display two peaks with equal intensities and isotropic chemical shifts of 3.7 and 5?ppm. The D-D distance [D(1)-D(2) distance] at ambient pressure was found to be 2.09?±?0.02?Å from the neutron diffraction data and 2.09?±?0.05?Å from the NMR spectra. At 3.2?GPa, there is no statistically significant increase in the O-D interatomic distance while the hydrogen bonding interaction D···O appears to increase for one of the hydrogen sites, D(1), which has the stronger hydrogen bonding interaction compared with the other hydrogen, D(2), at ambient pressure. The O-D bond valences, determined indirectly from the D···O distances were 0.86 and 0.91 at ambient pressure, and 0.83 and 0.90?at 3.2?GPa, for D(1) and D(2), respectively.     

Perrierite-(La), (La,Ce,Ca)4(Fe2+,Mn)(Ti,Fe3+,Al)4(Si2O7)2O8, a new mineral species from the Eifel volcanic district, Germany

Non-metamict perrierite-(La) discovered in the Dellen pumice quarry, near Mendig, in the Eifel volcanic district, Rheinland-Pfalz, Germany has been approved as a new mineral species (IMA no. 2010-089). The mineral was found in the late assemblage of sanidine, phlogopite, pyrophanite, zirconolite, members of the jacobsite-magnetite series, fluorcalciopyrochlore, and zircon. Perrierite-(La) occurs as isolated prismatic crystals up to 0.5 × 1 mm in size within cavities in sanidinite. The new mineral is black with brown streak; it is brittle, with the Mohs hardness of 6 and distinct cleavage parallel to (001). The calculated density is 4.791 g/cm³. The IR spectrum does not contain absorption bands that correspond to H₂O and OH groups. Perrierite-(La) is biaxial (-), α = 1.94(1), β = 2.020(15), γ = 2.040(15), 2V _meas = 50(10)°, 2V _calc = 51°. The chemical composition (electron microprobe, average of seven point analyses, the Fe²⁺/Fe³⁺ ratio determined from the X-ray structural data, wt %) is as follows: 3.26 CaO, 22.92 La₂O₃, 19.64 Ce₂O₃, 0.83 Pr₂O₂, 2.09 Nd₂O₃, 0.25 MgO, 2.25 MnO, 3.16 FeO, 5.28 Fe₂O₃, 2.59 Al₂O₃, 16.13 TiO₂, 0.75 Nb₂O₅, and 20.06 SiO₂, total is 99.21. The empirical formula is (La_1.70Ce_1.45Nd_0.15Pr_0.06Ca_0.70)_Σ4.06(Fe _0.53 ²⁺ Mn_0.38Mg_0.08)_Σ0.99(Ti_2.44Fe _0.80 ³⁺ Al_0.62Nb_0.07)_Σ3.93Si_4.04O₂₂. The simplified formula is (La,Ce,Ca)₄(Fe²⁺,Mn)(Ti,Fe³⁺,Al)₄(Si₂O₇)₂O₈. The crystal structure was determined by a single crystal. Perrierite-(La) is monoclinic, space group P2₁/a, and the unit-cell dimensions are as follows: a =13.668(1), b = 5.6601(6), c = 11.743(1) Å, β = 113.64(1)°; V = 832.2(2) ų, Z = 2. The strong reflections in the X-ray powder diffraction pattern are [d, Å (I, %) (hkl)]: 5.19 (40) (110), 3.53 (40) ( $\overline 3 $ 11), 2.96 (100) ( $\overline 3 $ 13, 311), 2.80 (50) (020), 2.14 (50) ( $\overline 4 $ 22, $\overline 3 $ 15, 313), 1.947 (50) (024, 223), 1.657 (40) ( $\overline 4 $ 07, $\overline 4 $ 33, 331). The holotype specimen of perrierite-(La) is deposited at the Fersman Mineralogical Museum, Russian Academy of Sciences, Moscow, Russia, with the registration number 4059/1.     

(Ca,Mg)2Si2O6 clinopyroxenes: A solution model based on nonconvergent site-disorder

Experiments at high pressure and temperature indicate that excess Ca may be dissolved in diopside. If the (Ca, Mg)₂Si₂O₆ clinopyroxene solution extends to more Ca-rich compositions than CaMgSi₂O₆, macroscopic regular solution models cannot strictly be applied to this system. A nonconvergent site-disorder model, such as that proposed by Thompson (1969, 1970), may be more appropriate. We have modified Thompson's model to include asymmetric excess parameters and have used a linear least-squares technique to fit the available experimental data for Ca-Mg orthopyroxene-clinopyroxene equilibria and Fe-free pigeonite stability to this model. The model expressions for equilibrium conditions \(\mu _{{\text{Mg}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{opx}}} = \mu _{{\text{Mg}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{cpx}}} \) (reaction A) and \(\mu _{{\text{Ca}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{opx}}} = \mu _{{\text{Ca}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{cpx}}} \) (reaction B) are given by: 1 $$\begin{gathered} \Delta \mu _{\text{A}}^{\text{O}} = {\text{RT 1n}}\left[ {\frac{{(X_{{\text{Mg}}}^{{\text{opx}}} )^2 }}{{X_{{\text{Mg}}}^{{\text{M1}}} \cdot X_{{\text{Mg}}}^{{\text{M2}}} }}} \right] - \frac{1}{2}\{ W_{21} [2(X_{{\text{Ca}}}^{{\text{M2}}} )^3 - (X_{{\text{Ca}}}^{{\text{M2}}} ] \hfill \\ {\text{ + 2W}}_{{\text{22}}} [X_{{\text{Ca}}}^{{\text{M2}}} )^2 - (X_{{\text{Ca}}}^{{\text{M2}}} )^3 + \Delta {\text{G}}_{\text{*}}^{\text{0}} (X_{{\text{Ca}}}^{{\text{M1}}} \cdot X_{{\text{Ca}}}^{{\text{M2}}} )\} \hfill \\ {\text{ + W}}^{{\text{opx}}} (X_{{\text{Wo}}}^{{\text{opx}}} )^2 \hfill \\ \Delta \mu _{\text{B}}^{\text{O}} = {\text{RT 1n}}\left[ {\frac{{(X_{{\text{Ca}}}^{{\text{opx}}} )^2 }}{{X_{{\text{Ca}}}^{{\text{M1}}} \cdot X_{{\text{Ca}}}^{{\text{M2}}} }}} \right] - \frac{1}{2}\{ 2W_{21} [2(X_{{\text{Mg}}}^{{\text{M2}}} )^2 - (X_{{\text{Mg}}}^{{\text{M2}}} )^3 ] \hfill \\ {\text{ + W}}_{{\text{22}}} [2(X_{{\text{Mg}}}^{{\text{M2}}} )^3 - (X_{{\text{Mg}}}^{{\text{M2}}} )^2 + \Delta {\text{G}}_{\text{*}}^{\text{0}} (X_{{\text{Mg}}}^{{\text{M1}}} \cdot X_{{\text{Mg}}}^{{\text{M2}}} )\} \hfill \\ {\text{ + W}}^{{\text{opx}}} (X_{{\text{En}}}^{{\text{opx}}} )^2 \hfill \\ \hfill \\ \end{gathered} $$ where 1 $$\begin{gathered} \Delta \mu _{\text{A}}^{\text{O}} = 2.953 + 0.0602{\text{P}} - 0.00179{\text{T}} \hfill \\ \Delta \mu _{\text{B}}^{\text{O}} = 24.64 + 0.958{\text{P}} - (0.0286){\text{T}} \hfill \\ {\text{W}}_{{\text{21}}} = 47.12 + 0.273{\text{P}} \hfill \\ {\text{W}}_{{\text{22}}} = 66.11 + ( - 0.249){\text{P}} \hfill \\ {\text{W}}^{{\text{opx}}} = 40 \hfill \\ \Delta {\text{G}}_*^0 = 155{\text{ (all values are in kJ/gfw)}}{\text{.}} \hfill \\ \end{gathered} $$ . Site occupancies in clinopyroxene were determined from the internal equilibrium condition 1 $$\begin{gathered} \Delta G_{\text{E}}^{\text{O}} = - {\text{RT 1n}}\left[ {\frac{{X_{{\text{Ca}}}^{{\text{M1}}} \cdot X_{{\text{Mg}}}^{{\text{M2}}} }}{{X_{{\text{Ca}}}^{{\text{M2}}} \cdot X_{{\text{Mg}}}^{{\text{M1}}} }}} \right] + \tfrac{1}{2}[(2{\text{W}}_{{\text{21}}} - {\text{W}}_{{\text{22}}} )(2{\text{X}}_{{\text{Ca}}}^{{\text{M2}}} - 1) \hfill \\ {\text{ + }}\Delta G_*^0 (X_{{\text{Ca}}}^{{\text{M1}}} - X_{{\text{Ca}}}^{{\text{M2}}} ) + \tfrac{3}{2}(2{\text{W}}_{{\text{21}}} - {\text{W}}_{{\text{22}}} ) \hfill \\ {\text{ (1}} - 2X_{{\text{Ca}}}^{{\text{M1}}} )(X_{{\text{Ca}}}^{{\text{M1}}} + \tfrac{1}{2})] \hfill \\ \end{gathered} $$ where δG _E ⁰ =153+0.023T+1.2P. The predicted concentrations of Ca on the clinopyroxene Ml site are low enough to be compatible with crystallographic studies. Temperatures calculated from the model for coexisting ortho- and clinopyroxene pairs fit the experimental data to within 10° in most cases; the worst discrepancy is 30°. Phase relations for clinopyroxene, orthopyroxene and pigeonite are successfully described by this model at temperatures up to 1,600° C and pressures from 0.001 to 40 kbar. Predicted enthalpies of solution agree well with the calorimetric measurements of Newton et al. (1979). The nonconvergent site disorder model affords good approximations to both the free energy and enthalpy of clinopyroxenes, and, therefore, the configurational entropy as well. This approach may provide an example for Febearing pyroxenes in which cation site exchange has an even more profound effect on the thermodynamic properties.     

Structural change associated with the incommensurate-normal phase transition in akermanite, Ca2MgSi2O7, at high pressure

The structural changes associated with the incommensurate (IC)-normal (N) phase transition in akermanite have been studied with high-pressure single-crystal X-ray diffraction up to 3.79?GPa. The IC phase, stable at room pressure, transforms to the N phase at ～1.33?GPa. The structural transformation is marked by a small but discernable change in the slopes of all unit-cell parameters as a function of pressure. It is reversible with an apparent hysteresis and is classified as a tricritical phase transition. The linear compressibility of the a and c axes are 0.00280(10) and 0.00418(6)?GPa^?1 for the IC phase, and 0.00299(11) and 0.00367(8)?GPa^?1 for the N phase, respectively. Weighted volume and pressure data, fitted to a second-order Birch-Murnaghan equation of state (K′≡4.0), yield V₀=307.4(1)?ų and K₀=100(3)?GPa for the IC phase and V₀=307.6(2)?ų and K₀=90(2)?GPa for the N phase. No significant discontinuities in Si–O, Mg–O and Ca–O distances were observed across the transition, except for the Ca–O1 distance, which is more compressible in the IC phase than in the N phase. From room pressure to 3.79?GP the volume of the [SiO₄] tetrahedron is unchanged (2.16?ų), whereas the volumes of the [MgO₄] and [CaO₈] polyhedra decrease from 3.61 to 3.55(1)?ų and 32.8 to 30.9(2)?ų, respectively. Intensities of satellite reflections are found to vary linearly with the isotropic displacement parametr of Ca and the librational amplitude of the [SiO₄] tetrahedron. At room pressure, there is a mismatch between the size of the Ca cations and the configuration of tetrahedral sheets, which appears to be responsible for the formation of the modulated structure; as pressure increases, the misfit is diminished through the relative rotation and distortion of [MgO₄] and [SiO₄] tetrahedra and the differential compression of individual Ca–O distances, concurrent with a displacement of Ca along the (110) mirror plane toward the O1 atom. We regard the high-pressure normal structure as a result of the elimination of microdomains in the modulated structure.     

The low-pressure stability of phase A,Mg7Si2O8(OH)6

 Phase A, Mg₇Si₂O₈(OH)₆, is a dense hydrous magnesium silicate whose importance as a host of H₂O in the Earth’s mantle is a subject of debate. We have investigated the low-pressure stability of phase A in experiments on the reaction phase A=brucite+forsterite. Experiments were conducted in piston-cylinder and multi-anvil apparatus, using mixtures of synthetic phase A, brucite and forsterite. The reaction was bracketed between 2.60 and 2.75 GPa at 500° C, between 3.25 and 3.48 GPa at 600° C and between 3.75 and 3.95 GPa at 650^° C. These pressures are much lower than observed in the synthesis experiments of Yamamoto and Akimoto (1977). At 750^° C the stability field of brucite + chondrodite was entered. The enthalpy of formation and entropy of phase A at 1 bar (10⁵ Pa), 298 K, were derived from the experimental brackets on the reaction phase A=brucite+forsterite using a modified version of the thermodynamic dataset THERMOCALC of Holland and Powell (1990), which includes a new equation of state of H₂O derived from the molecular dynamics simulations of Brodholt and Wood (1993). The data for phase A are: ΔH ^o _f =−7126±8 kJ mol^-1, S ^o=351 J K^-1 mol^-1. Incorporating these data into THERMOCALC allows the positions of other reactions involving phase A to be calculated, for example the reaction phase A + enstatite=forsterite+vapour, which limits the stability of phase A in equilibrium with enstatite. The calculated position of this reaction (753° C at 7 GPa to 937° C at 10 GPa) is in excellent agreement with the experimental brackets of Luth (1995) between 7 and 10 GPa, supporting the choice of equation of state of H₂O used in THERMOCALC. Comparison of our results with calculated P-T paths of subducting slabs (Peacock et al. 1994) suggests that, in the system MgO–SiO₂–H₂O, phase A could crystallise in compositions with Mg/Si>2 at pressures as low as 3 GPa. In less Mg rich compositions phase A could crystallise at pressures above approximately 6 GPa. Received: 3 July 1995/Accepted: 14 December 1995     

The cubic-tetragonal phase transition in the system majorite (Mg4Si4O12) – pyrope (Mg3Al2Si3O12), and garnet symmetry in the Earth's transition zone

 Garnets along the join Mg₄Si₄O₁₂ (majorite end member) – Mg₃Al₂Si₃O₁₂ (pyrope) synthesized at 2000 °C, 19 GPa are, after quench, tetragonal in the compositional range up to 20 mol% pyrope, but cubic at higher Al contents. Lattice constants a _tet and a _tet in the tetragonal compositional range converge with increasing pyrope contents towards the lattice constant of the cubic garnets. The elastic strain and the intensity of the (222) reflection as a function of composition indicate a second-order phase transition near 20 mol% pyrope. From the wedge-like shape of pseudomerohedral twins and their interaction near 90° twin-boundary corners, as well as from the absence of growth-induced dislocations, it is concluded that the Al-poor garnets are also cubic at synthesis conditions but invert by (Mg,Si) ordering on the octahedral sites into tetragonal phases of space group I4₁/a upon quench. This implies that the cubic-to-tetragonal phase transition in Mg₄Si₄O₁₂ garnet occurs below 2000 °C at 19 GPa and at even lower temperatures in more aluminous compositions. A composition-dependent Landau model is consistent with a direct transformation from Ia3d to I4₁/a. Comparison of the T-X stability field of majorite-pyrope garnets with the chemistry of majorite-rich garnets expected to occur in the Earth's transition zone shows that the latter will be cubic under all conditions. Softening of elastic constants, which commonly accompanies ferroelastic phase transitions, may affect the seismic velocities of garnets in the deeper transition zone where majorite contents are highest. Received July 5, 1996 / Revised, accepted September 24, 1996     

Yellow fluorescence from baghdadite and synthetic Ca3(Zr,Ti)Si2O9

Baghdadite from Fuka, Okayama Prefecture, Japan shows a bright yellow fluorescence under UV (Hg 253.7 nm) excitation. The photoluminescence (PL) spectrum at 300 K consists of one large band near 580 nm and two small UV bands at 318 and 397 nm. The optical excitation spectrum of the bright yellow fluorescence consists of two bands near 220 and 250 nm. The temperature dependence of the PL intensity exhibits linear thermal quenching. To reveal the origin of the bright yellow fluorescence from baghdadite, powder Ca₃(Zr,Ti)Si₂O₉ crystals are synthesized. Synthetic Ca₃(Zr,Ti)Si₂O₉ shows luminescence spectra similar to those of baghdadite, and the intensity of the yellow fluorescence is markedly increased by titanium addition. The origin of the bright yellow fluorescence from baghdadite is ascribed to the existence of titanium.     

Mechanical twinning in diopside Ca(Mg,Fe)Si2O6: Structural mechanism and associated crystal defects

Diopside twins mechanically on two planes, (100) and (001), and the associated macroscopic twinning strains are identical (Raleigh and Talbot, 1967). An analysis based on crystal structural arguments predicts that both twin mechanisms involve shearing of the (100) octahedral layers (containing Ca²⁺, Mg²⁺ and Fe²⁺ ions) by a magnitude of c/2. Small adjustments or shuffles occur in the adjacent layers containing the [SiO₄]^4? tetrahedral chains. While the (100) twins are conventional with shear parallel to the composition plane, this analysis predicts that (001) twins form by a mechanism closely related to kinking. A polycrystalline diopside specimen was compressed 8% at a temperature of 400° C, a pressure of 16 kilobars, and a compressive strain rate of about 10^?4/s. Transmission electron microscopy on this specimen has revealed four basic lamellar features:

1. (100) mechanical twin lamellae;
2. (100) glide bands containing unit dislocations;
3. (001) twin lamellae;
4. (101) lamellar features, not as yet identified.

The (001) twins often contain remnant (100) lamellae of untwinned host. Twinning dislocations occur in these (100) lamellae and in the (001) twin boundaries with very high densities. Diffraction contrast experiments indicate that the twinning dislocations associated with both twin laws glide on (100) with Burgers vector b=X [001] where X is probably equal to 1/2 on the basis of the structural analysis. Parallels are drawn between mechanical twinning in clinopyroxenes and clinoamphiboles. The exclusive natural occurrence of basal twins in shock-loaded clinopyroxenes and of analogous ( \(\bar 1\) 01) twins in clinoamphiboles is given a simple explanation in terms of the relative difficulty of the “kinking” mechanism as compared to direct glide parallel to the composition plane.     

High temperature single crystal X-ray diffraction studies of the ortho-proto phase transition in enstatite,Mg2Si2O6 at 1360 K

A high temperature single-crystal X-ray diffraction study of enstatite, Mg₂Si₂O₆ was undertaken at 296, 900, 1200, 1360 and 1400 K. During the X-ray data collection at 1360 K (T₀), orthoenstatite (Pbca) transformed to protoenstatite (Pbcn). The unit cell parameters measured at T₀ are a=18.456(4), b=8.960(2) and c=5.270(1) Å for ortho and a=9.306(1), b=8.886(1) and c=5.360(1) Å for proto. The discontinuous increase in c and decrease in b due to the ortho to proto transformation are associated with the drastic unkinking of the silicate chains, whereas the abrupt increase in a results from the large expansion of the M2 — O distances along a coupled with the increase in the out-of-plane tilting of the silicate tetrahedra. Stacking faults form in ortho prior to the phase transition, as well as in proto between 1360 and 1400 K. With increasing temperature, the silicate B chain in ortho straightens faster than the A chain as the configurations of the SiA and SiB tetrahedra tend to become similar. At T₀, the A and B chains with the O3-O3-O3 angles (O3 being the bridging oxygen atom) of 163.0° and 149.5° in ortho, respectively, attain an identical angle of 168.4° in proto. The configuration of the silicate chain in proto resembles that of the A chain in ortho. Rigid-body thermal vibration analysis suggests that between 1200 and 1400 K the largest, the second largest and the smallest thermal librational motions of the [SiO₄] tetrahedra in both ortho and proto are approximately around a, c and b, respectively. Below 1200 K, the largest thermal librational amplitudes of the SiA and SiB tetrahedra in ortho are quite different, but become nearly equivalent at T₀. In contrast to the results reported for all iron-bearing orthopyroxenes at high temperature, switching of the O3B atoms coordinated with the M2 cation occurs during the ortho to proto transformation, but not in ortho below T₀. The ortho-proto transition does not affect the configuration of the M1 octahedron significantly, but results in a decrease of the mean M2 — O bond distance by 0.043 Å and a highly distorted M2 octahedron in proto.     

A New Compound of the (K,Na)3Ca8Si6[Si4O12]3 Charoite Substrate

Doklady Earth Sciences - As a result of experimental studies on the interaction between a charoite substrate and host lamprophyres of microcline-arfvedsonitic composition, a new...     

The distribution of Fe3+ and Ga3+ between two tetrahedral sites in melilites,Ca2(Mg,Fe3+, Ga,Si)3O7

The distribution of Fe³⁺ and Ga³⁺ between the two tetrahedral sites in three synthetic melilites has been studied by using ⁵⁷Fe Mössbauer spectroscopy. In the melilite, (Ca₂Ga₂SiO₇)₅₀ (Ca₂Fe³⁺GaSiO₇)₅₀ (mol %), the distribution of Fe³⁺ and Ga³⁺ in T1 and T2 sites is apparently random, which can be explained in terms of the electrostatic valence rule. However in the melilites, (Ca₂MgSi₂O₇)₅₂ (Ca₂Fe³⁺GaSiO₇)₄₂ (Ca₂Ga₂SiO₇)₆ and (Ca₂MgSi₂O₇)₆₂ (Ca₂Fe³⁺GaSiO₇)₃₆ (Ca₂Ga₂SiO₇)₂ (mol %), Fe³⁺ shows preference for the more ionic T1 site and Ga³⁺ for the more covalent T2 site. If the electronegativity of Ga³⁺ is assumed to be larger than that of Fe³⁺, the mode of distribution of Fe³⁺ and Ga³⁺ can be explained in terms of our previous hypothesis that a large electronegativity induces a stronger preference for the more covalent T2 site.     

On the entropy of glaucophane Na2Mg3Al2Si8O22(OH)2

The heat capacity of glaucophane from the Sesia-Lanza region of Italy having the approximate composition (Na_1.93Ca_0.05Fe_0.02) (Mg_2.60Fe_0.41) (Al_1.83Fe_0.15Cr_0.01) (Si_7.92Al_0.08)O₂₂(OH)₂ was measured by adiabatic calorimetry between 4.6 and 359.4 K. After correcting the C _p ⁰ data to values for ideal glaucophane, Na₂Mg₃Al₂Si₈O₂₂(OH)₂ the third-law entropy S ₂₉₈ ⁰ -S ₀ ⁰ was calculated to be 541.2±3.0 J·mol^-1·K^-1. Our value for S ₂₉₈ ⁰ -S ₀ ⁰ is 12.0 J·mol^-1·K^-1 (2.2%) smaller than the value of Likhoydov et al. (1982), 553.2±3.0, is within 6.2 J·mol^-1·K^-1 of the value estimated by Holland (1988), and agrees remarkably well with the value calculated by Gillet et al. (1989) from spectroscopic data, 539 J·mol^-1·K^-1.     

Synthesis and crystal structure of a triple chain silicate,Na2Mg4Si6O16(OH)2

In the system Na₂CO₃-MgO-SiO₂-H₂O a new sodium magnesium silicate was synthesized under hydrothermal conditions; 450–600 ° C and 300–1000 Kg/cm₂. The structure of the specimen was determined by X-ray powder methods, and its properties were studied by chemical, infrared and TG analyses. The specimen has a triple chain structure (space group, C2/c) with the ideal chemical composition, 4 (Na₂Mg₄Si₆O₁₆(OH)₂) and lattice parameters, a= 10.152(2), b=27.137(4), c=5.276(1) Å, and = 106.97(3) °.The essential feature of the structure is shown by the presence of SiO₄ tetrahedra linked to form chains which have three times the width of those in pyroxene. These triple chains have a periodicity, 5.27 Å, along their lengths, and are bonded to each other laterally by the brucite layer made up by eight Mg cations and sandwiched between two inward pointing bands of tetrahedra. These units are linked back to back by cations (Mg or Na) in the Na(2) site and by a large cation (Na) at the Na(1) site.     

Vanadio-pargasite NaCa2(Mg4V)(Si6Al2)O22(OH)2: a New Mineral of the Amphibole Supergroup

Geology of Ore Deposits - A new mineral was discovered in Cr–V-bearing marbles of the Sludyanka Complex from the Pereval marble quarry, Sludyanka district, southern Baikal region, Russia. It...     

Determination of structures of Ca2CoSi2O7, Ca2MgSi2O7, and Ca2(Mg0.55Fe0.45)Si2O7 in incommensurate and normal phases and observation of diffuse streaks at high temperature

 The structures of Ca₂CoSi₂O₇, Ca₂MgSi₂O₇, and Ca₂(Mg_0.55Fe_0.45)Si₂O₇ have been determined in the temperature range between 297 and 773 K with arbitrary intervals. The structures of the incommensurate phase of the three compounds are characterized by the presence of the six-, seven-, and eight-coordinated Ca–O polyhedra and of the bundles along the c-axes consisting of four arrays of the six-coordinated Ca–O polyhedra and an array of T¹O₄ (T¹: Co, Mg, or Mg–Fe) tetrahedra in the structures. The number of bundles in each material decreases at elevated temperatures. The incommensurate phase undergoes a phase transition into the normal phase at 493 K in Ca₂CoSi₂O₇, at 360 K in Ca₂MgSi₂O₇, and at 510 K in Ca₂(Mg_0.55Fe_0.45)Si₂O₇. The features of the structures of the normal phase are almost the same as those found in the basic structures (the averaged structures of the incommensurate structures), and this fact implies that the characteristics of the structures, such as the six-coordinated Ca–O polyhedra or fragments of the bundles, should be partially preserved at higher temperatures both in the incommensurate structures and also in the structures of the normal phase. Analyses of anisotropic displacement parameters clarified that disorder of the modulation waves is developed in the structures at higher temperatures. The evolution of a disorder in the structures was ascertained by observation of the circular diffuse streaks in the vicinity of the transition temperature between the incommensurate and normal phases. Received: 3 July 2000 / Accepted: 26 October 2000     

Transmission electron microscope study of dislocations in orthopyroxene (Mg,Fe)2Si2O6

The orthopyroxene crystal structure can be viewed as the stacking of alternating tetrahedral and octahedral layers parallel to the (100) plane. Easy glide occurs in the (100) plane at the level of the octahedral layer to prevent breakage of the strong Si-O bonds. Dislocations with c and b Burgers vectors have been activated in (100) by room temperature indentation in an orthoenstatite gem quality single crystal. Investigations in transmission electron microscopy show that the b dislocations (b?9 Å) are not dissociated while the c's (c=5.24 Å) are dissociated into four partials. This result is interpreted by considering the oxygen sublattice as a distorted FCC one. The four c partials are thus Shockley partials bounding three stacking faults. For the two outer ones, synchroshear of the cations is necessary to keep unchanged their sixfold coordination; the oxygen sublattice is locally transformed into a HCP lattice. This accounts for the observed low splitting (?100 Å) of these faults as compared to the median one (?500 Å) which does not affect the oxygen sublattice and does not require cation synchroshear. In a Fe rich orthopyroxene (eulite), semi coherent exsolution lamellae have been studied. Either only c edge dislocations or both b and c edge dislocations occur in the phase boundaries depending upon the thickness of the lamellae. Only the c dislocations are dissociated. From the observed spacing between these mismatch dislocations a crude estimate of the exsolution temperature is proposed T _ex ? 700° C.