Pre- and syn-eruptive degassing and crystallisation processes of the 2010 and 2006 eruptions of Merapi volcano,Indonesia

The 2010 eruption of Merapi (VEI 4) was the volcano’s largest since 1872. In contrast to the prolonged and effusive dome-forming eruptions typical of Merapi’s recent activity, the 2010 eruption began explosively, before a new dome was rapidly emplaced. This new dome was subsequently destroyed by explosions, generating pyroclastic density currents (PDCs), predominantly consisting of dark coloured, dense blocks of basaltic andesite dome lava. A shift towards open-vent conditions in the later stages of the eruption culminated in multiple explosions and the generation of PDCs with conspicuous grey scoria and white pumice clasts resulting from sub-plinian convective column collapse. This paper presents geochemical data for melt inclusions and their clinopyroxene hosts extracted from dense dome lava, grey scoria and white pumice generated during the peak of the 2010 eruption. These are compared with clinopyroxene-hosted melt inclusions from scoriaceous dome fragments from the prolonged dome-forming 2006 eruption, to elucidate any relationship between pre-eruptive degassing and crystallisation processes and eruptive style. Secondary ion mass spectrometry analysis of volatiles (H₂O, CO₂) and light lithophile elements (Li, B, Be) is augmented by electron microprobe analysis of major elements and volatiles (Cl, S, F) in melt inclusions and groundmass glass. Geobarometric analysis shows that the clinopyroxene phenocrysts crystallised at depths of up to 20 km, with the greatest calculated depths associated with phenocrysts from the white pumice. Based on their volatile contents, melt inclusions have re-equilibrated during shallower storage and/or ascent, at depths of ~0.6–9.7 km, where the Merapi magma system is interpreted to be highly interconnected and not formed of discrete magma reservoirs. Melt inclusions enriched in Li show uniform “buffered” Cl concentrations, indicating the presence of an exsolved brine phase. Boron-enriched inclusions also support the presence of a brine phase, which helped to stabilise B in the melt. Calculations based on S concentrations in melt inclusions and groundmass glass require a degassing melt volume of 0.36 km³ in order to produce the mass of SO₂ emitted during the 2010 eruption. This volume is approximately an order of magnitude higher than the erupted magma (DRE) volume. The transition between the contrasting eruptive styles in 2010 and 2006 is linked to changes in magmatic flux and changes in degassing style, with the explosive activity in 2010 driven by an influx of deep magma, which overwhelmed the shallower magma system and ascended rapidly, accompanied by closed-system degassing.     

Mixing and differentiation in the Oruanui rhyolitic magma, Taupo, New Zealand: evidence from volatiles and trace elements in melt inclusions

Large pyroclastic rhyolites are snapshots of evolving magma bodies, and preserved in their eruptive pyroclasts is a record of evolution up to the time of eruption. Here we focus on the conditions and processes in the Oruanui magma that erupted at 26.5 ka from Taupo Volcano, New Zealand. The 530 km³ (void-free) of material erupted in the Oruanui event is comparable in size to the Bishop Tuff in California, but differs in that rhyolitic pumice and glass compositions, although variable, did not change systematically with eruption order. We measured the concentrations of H₂O, CO₂ and major and trace elements in zoned phenocrysts and melt inclusions from individual pumice clasts covering the range from early to late erupted units. We also used cathodoluminescence imaging to infer growth histories of quartz phenocrysts. For quartz-hosted inclusions, we studied both fully enclosed melt inclusions and reentrants (connecting to host melt through a small opening). The textures and compositions of inclusions and phenocrysts reflect complex pre-eruptive processes of incomplete assimilation/partial melting, crystallization differentiation, magma mixing and gas saturation. ‘Restitic’ quartz occurs in seven of eight pumice clasts studied. Variations in dissolved H₂O and CO₂ in quartz-hosted melt inclusions reflect gas saturation in the Oruanui magma and crystallization depths of ∼3.5–7 km. Based on variations of dissolved H₂O and CO₂ in reentrants, the amount of exsolved gas at the beginning of eruption increased with depth, corresponding to decreasing density with depth. Pre-eruptive mixing of magma with varying gas content implies variations in magma bulk density that would have driven convective mixing. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

The behavior of chlorine and sulfur during differentiation of the Mt. Somma-Vesuvius magmatic system

Summary Reheated silicate melt inclusions in volcanic rock samples from Mt. Somma-Vesuvius, Italy, have been analyzed for 29 constituents including H₂O, S, Cl, F, B, and P₂O₅. This composite volcano consists of the older Mt. Somma caldera, formed between 14 and 3.55 ka before present, and the younger Vesuvius cone. The melt inclusion compositions provide important constraints on pre-eruptive magma geochemistry, identify relationships that relate to eruption behavior and magma evolution, and provide extensive evidence for magmatic fluid exsolution well before eruption. The melt inclusion data have been categorized by groups that reflect magma compositions, age, and style of eruptions. The data show distinct differences in composition for eruptive products older than 14.0 ka (pre-caldera rocks) versus eruptive products younger than 3.55 ka. Moreover, pre-caldera eruptions were associated with magmas relatively enriched in SiO₂, whereas eruptions younger than 3.55 ka (i.e., the syn- and post-caldera magmas which generated the Somma caldera and the Vesuvius cone) were derived from magmas comparatively enriched in S, Cl, CaO, MgO, P₂O₅, F, and many lithophile trace elements. Melt inclusion data indicate that eruptive behavior at Vesuvius correlates with pre-eruptive volatile enrichments. Most magmas associated with explosive plinian and subplinian events younger than 3.55 ka contained more H₂O, contained significantly more S, and exhibited higher (S/Cl) ratios than syn- and post-caldera magmas which erupted during relatively passive interplinian volcanic phenomena. Received January 10, 2000 Revised version accepted July 17, 2000     

Geochemical evolution of halogen-enriched granite magmas and mineralizing fluids of the Zinnwald tin-tungsten mining district,Erzgebirge, Germany

We remelted and analyzed crystallized silicate melt inclusions in quartz from a porphyritic albite-zinnwaldite microgranite dike to determine the composition of highly evolved, shallowly intruded, Li- and F-rich granitic magma and to investigate the role of crystal fractionation and aqueous fluid exsolution in causing the extreme extent of magma differentiation. This dike is intimately associated with tin- and tungsten-mineralized granites of Zinnwald, Erzgebirge, Germany. Prior research on Zinnwald granite geochemistry was limited by the effects of strong and pervasive greisenization and alkali-feldspar metasomatism of the rocks. These melt inclusions, however, provide important new constraints on magmatic and mineralizing processes in Zinnwald magmas.The mildly peraluminous granitic melt inclusions are strongly depleted in CAFEMIC constituents (e.g., CaO, FeO, MgO, TiO₂), highly enriched in lithophile trace elements, and highly but variably enriched in F and Cl. The melt inclusions contain up to several thousand ppm Cl and nearly 3 wt% F, on average; several inclusions contain more than 5 wt% F. The melt inclusions are geochemically similar to the corresponding whole-rock sample, except that the former contain much more F and less CaO, FeO, Zr, Nb, Sr, and Ba. The Sr and Ba abundances are very low implying the melt inclusions represent magma that was more evolved than that represented by the bulk rock. Relationships involving melt constituents reflect increasing lithophile-element and halogen abundances in residual melt with progressive magma differentiation. Modeling demonstrates that differentiation was dominated by crystal fractionation involving quartz and feldspar and significant quantities of topaz and F-rich zinnwaldite. The computed abundances of the latter phases greatly exceed their abundances in the rocks, suggesting that the residual melt was separated physically from phenocrysts during magma movement and evolution.Interactions of aqueous fluids with silicate melt were also critical to magma evolution. To better understand the role of halogen-charged, aqueous fluids in magmatic differentiation and in subsequent mineralization and metasomatism of the Zinnwald granites, Cl-partitioning experiments were conducted with a F-enriched silicate melt and aqueous fluids at 2,000 bar (200 MPa). The results of the experimentally determined partition coefficients for Cl and F, the compositions of fluid inclusions in quartz and other phenocrysts, and associated geochemical modeling point to an important role of magmatic-hydrothermal fluids in influencing magma geochemistry and evolution. The exsolution of halogen-charged fluids from the Li- and F-enriched Zinnwald granitic magma modified the Cl, alkali, and F contents of the residual melt, and may have also sequestered Li, Sn, and W from the melt. Many of these fluids contained strongly elevated F concentrations that were equivalent to or greater than their Cl abundances. The exsolution of F-, Cl-, Li-, ± W- and Sn-bearing hydrothermal fluids from Zinnwald granite magmas was important in effecting the greisenizing and alkali-feldspathizing metasomatism of the granites and the concomitant mineralization.Editorial Handling: B. Lehmann     

The melt inclusion record from the rhyolitic Kos Plateau Tuff (Aegean Arc)

The >60 km³ rhyolitic Kos Plateau Tuff provides an exceptional probe into the behavior of volatile components in highly evolved arc magmas: it is crystal-rich (30–40 vol% crystals), was rapidly quenched by the explosive eruptive process, and contains abundant homogeneous melt inclusions in large quartz crystals. Several methods for measuring major, trace and volatile element concentrations (SIMS, FTIR, Raman spectroscopy, electron microprobe, LA–ICPMS) were applied to these melt inclusions. We found a ~2 wt% range of H₂O contents (4.5–6.5 wt% H₂O, measured independently by SIMS, FTIR, and Raman spectroscopy) and relatively low CO₂ concentrations (15–140 ppm measured by FTIR, with most analyses <100 ppm). No obvious correlations between H₂O, CO₂, major and trace elements are observed. These observations require a complex, protracted magma evolution in the upper crust that included: (1) vapor-saturated crystallization in a chamber located between 1.5 and 2.5 kb pressure, (2) closed-system degassing (with up to 10 vol% exsolved gas) as melts percolated upwards through a vertically extensive mush zone (2–4 km thick), and (3) periodic gas fluxing from subjacent, more mafic and more CO₂-rich magma, which is preserved as andesite bands in pumices. These processes can account for the range of observed H₂O and CO₂ values and the lack of correlation between volatiles and trace elements in the melt inclusions.     

Volatiles in glasses from Mauna Loa Volcano,Hawai'i: implications for magma degassing and contamination,and growth of Hawaiian volcanoes

Glasses from Mauna Loa pillow basalts, recent subaerial vents, and inclusions in olivine were analyzed for S, Cl, F, and major elements by electron microprobe. Select submarine glasses were also analyzed for H₂O and CO₂ by infrared spectroscopy. The compositional variation of these tholeiitic glasses is dominantly controlled by crystal fractionation and they indicate quenching temperatures of 1,115-1,196 °C. Submarine rift zone glasses have higher volatile abundances (except F) than nearly all other submarine and subaerial glasses with the maximum concentrations increasing with water depth. The overwhelming dominance of degassed glasses on the submarine flanks of Mauna Loa implies that much of volcano's recent submarine growth involved subaerially erupted lava that reached great water depths (up to 3.1 km) via lava tubes. Anomalously high F and Cl in some submarine glasses and glass inclusions indicate contamination possibly by fumarolic deposits in ephemeral rift zone magma chambers. The relatively high CO₂ but variable H₂O/K₂O and S/K₂O in some submarine rift zone glasses indicates pre-eruptive mixing between degassed and undegassed magma within Mauna Loa's rift system. Volatile compositions for Mauna Loa magmas are similar to other active Hawaiian volcanoes in S and F, but are less Cl-rich than Ll'ihi glasses. However, Cl/K2O ratios are similar. Mauna Loa and Ll'ihi magmas have comparable, but lower H₂O than those from Kilauea. Thus, Kilauea's source may be more H₂O-rich. The dissimilar volatile distribution in glasses from active Hawaiian volcanoes is inconsistent with predictions for a simple, concentrically zoned plume model.     

Overheated, Cu-bearing magmas in the Zaldívar porphyry-Cu deposit, Northern Chile. Geodynamic consequences

The Zaldívar porphyry copper deposit, Northern Chile, consists of two major intrusions, the 290 Ma Zaldívar, and the more recent Miocene (38.7 Ma) Llamo porphyry. Five types of inclusions have been identified in quartz phenocrysts from Llamo porphyry, including melt inclusions (M), and four types of fluid inclusions, called MS (multi solids), B (brines), G (vapor-rich) and W (aqueous), respectively.Melt remnants, well preserved as M-inclusions, homogenize around 1000 °C. They show a rhyolitic composition, comparable to the most evolved acidic rhyolitic end member found elsewhere in the regional magmatism and to worldwide volcanic rhyolitic glass. High silica content in some inclusions can, however, be due to partial remelting of the quartz host during the heating run. Copper content in the same inclusions ranges between 0.03 and 0.57 wt.%, with an average concentration of 0.10 wt.%, suggesting a major magmatic source for the copper (orthomagmatic model).MS inclusions, which contain a number of solids at room temperature, mostly H₂O-bearing phases (system NaCl–KCl–((Fe, Mg, Cu)Cl)–H₂O, average salinity 70 wt.% NaCl equiv.), homogenize at magmatic temperatures (around 1000 °C). They represent the first fluids to have exsolved from the magma at depth, at a pressure of about 2 kbar. Their high homogenization temperature, comparable to values measured for melt inclusions (1000 to 1050 °C), may indicate trapping of MS and M inclusions in host phenocrysts from an immiscible mixture of silicate melt and highly saline fluids expelled from the magma during the early stage of quartz crystallization.The data indicate a magmatic origin for copper, as well as extremely high melt temperatures. These features are interpreted by magmatic differentiation of mantle-derived primitive melts, corresponding to major changes in the tectonic regime of the Andean margin, which occurred in Miocene times.     

The geochemistry of volatile species in melt inclusions and sulfide minerals from Izu-Oshima volcano, Japan

Olivine-hosted melt inclusions in the O95 pyroclastic layer of Izu-Oshima volcano, Japan are basaltic to basaltic-andesitic in composition. The negative correlation between SiO₂ and H₂O in melt inclusions and reverse compositional zoning observed in olivine and other mineral phenocrysts is inferred to arise from mixing between a highly evolved and a less evolved magma. The latter is characterized by the highest S (0.15 wt.%) and H₂O (3.4 wt.%) concentrations among those described in reports of previous studies. The S⁶⁺/S_total ratios in melt inclusions were 0.64?–?0.73, suggesting a relatively high oxidation state (NNO + 0.87 at 1150°C). The presence of pyrrhotites, which are found only in titanomagnetite microlites, suggests that sulfide saturation occurred during microlite growth under at a sulfur fugacity (log fS₂) value of around + 0.5 for T = 1060°C. The groundmass glass compositions are more evolved (andesitic composition) than any melt inclusions containing high amounts of Cl (0.13 wt.%) but negligible H₂O (0.20 wt.%) and S (< 70 ppm), suggesting that Cl was retained in the magma, in contrast to S and H₂O, which degassed strongly during magma effusion.     

Evolution of the trachydacite and pantellerite magmas of the bimodal volcanic association of Dzarta-Khuduk, Central Mongolia: Investigation of inclusions in minerals

Using various methods of melt inclusion investigation, including electron and ion microprobe techniques, we estimated the composition, evolution, and formation conditions of melts producing the trachydacites and pantellerites of the Late Paleozoic bimodal volcanic association of Dzarta-Khuduk, Central Mongolia. Primary crystalline and melt inclusions were detected in anorthoclase from trachydacites and quartz from pantellerites and pantelleritic tuffs. Among the crystalline inclusions, we identified hedenbergite, fluorapatite, and pyrrhotite in the trachydacites and F-arfvedsonite, fluorite, ilmenite, and the rare REE diorthosilicate chevkinite in the pantellerites. Melt inclusions in anorthoclase from the trachydacites are composed of glass, a gas phase, and daughter minerals (F-arfvedsonite, fluorite, villiaumite, and anorthoclase rim on the inclusion wall). Melt inclusions in quartz from the pantellerites are composed of glass, a gas phase, and a fine-grained salt aggregate consisting of Li, Na, and Ca fluorides (griceite, villiaumite, and fluorite). Melt inclusions in quartz crystalloclasts from the pantelleritic tuffs are composed of homogeneous silicate glasses. The phenocrysts of the trachydacites and pantellerites crystallized at temperatures of 1060–1000°C. During thermometric experiments with quartz-hosted melt inclusions from the pantellerites, the formation of immiscible silicate and salt (fluoride) melts was observed at a temperature of 800°C. Homogeneous melt inclusions in anorthoclase from the trachydacites have both trachydacite and rhyolite compositions (wt %): 68–70 SiO₂, 12–13 Al₂O₃, 0.34–0.74 TiO₂, 5–7 FeO, 0.4–0.9 CaO, and 9–12 Na₂O + K₂O. The agpaitic index ranges from 0.92 to 1.24. The glasses of homogenized melt inclusions in quartz from the pantellerites and pantelleritic tuffs have rhyolitic compositions. Compared with the homogeneous glasses trapped in anorthoclase of the trachydacites, quartz-hosted inclusions from the pantellerites show higher SiO₂ (72–78 wt %) and lower Al₂O₃ contents (7.8–10.0 wt %). They also contain 0.14–0.26 wt % TiO₂, 2.5–4.9 wt % FeO, 9–11 wt % Na₂O + K₂O, and 0.9–0.15 wt % CaO and show an agpaitic index of 1.2–2.05. Homogeneous melt inclusions in quartz from the pantelleritic tuffs contain 69–72 wt % SiO₂. The contents of other major components, including TiO₂, Al₂O₃, FeO, and CaO, are close to those in the homogeneous glasses of quartzhosted melt inclusions in the pantellerites. The contents of Na₂O + K₂O are 4–10 wt %, and the agpaitic index is 1.0–1.6. The glasses of melt inclusions from each rock group show distinctive volatile compositions. The H₂O content is up to 0.08 wt % in anorthoclase of the trachydacites, 0.4–1.4 wt % in quartz of the pantellerites, and up to 5 wt % in quartz of the pantelleritic tuffs. The content of F in the glasses of melt inclusions in the phenocrysts of the trachydacites is no higher than 0.67 wt %, and up to 1.4–2.8 wt % in quartz from the pantellerites. The Cl content is up to 0.2 wt % in the glasses of melt inclusions in the minerals of the trachydacites and up to 0.5 wt % in the glasses of quartz-hosted melt inclusions from the pantellerites. The investigation of trace elements in the homogenized glasses of melt inclusions in minerals showed that the trachydacites and pantellerites were formed from strongly evolved rare-metal alkaline silicate melts with high contents of Li, Zr, Rb, Y, Hf, Th, U, and REE. The analysis of the composition of homogeneous melt inclusions in the minerals of the above rocks allowed us to distinguish magmatic processes resulting in the enrichment of these rocks in trace and rare earth elements. The most important processes are the crystallization differentiation and immiscible separation of silicate and fluoride salt melts. It was also shown that all the melts studied evolved in spatially separated magma chambers. This caused the differences in the character of melt evolution between the trachydacites and pantellerites. During the final stages of differentiation, when the magmatic system was saturated with respect to ore elements, Na-Ca fluoride melts were separated and extracted considerable amounts of Li.     

Heterogeneously entrapped,vapor-rich melt inclusions record pre-eruptive magmatic volatile contents

Silicate melt inclusions (MI) commonly provide the best record of pre-eruptive H₂O and CO₂ contents of subvolcanic melts, but the concentrations of CO₂ and H₂O in the melt (glass) phase within MI can be modified by partitioning into a vapor bubble after trapping. Melt inclusions may also enclose vapor bubbles together with the melt (i.e., heterogeneous entrapment), affecting the bulk volatile composition of the MI, and its post-entrapment evolution. In this study, we use numerical modeling to examine the systematics of post-entrapment volatile evolution within MI containing various proportions of trapped vapor from zero to 95 volume percent. Modeling indicates that inclusions that trap only a vapor-saturated melt exhibit significant decrease in CO₂ and moderate increase in H₂O concentrations in the melt upon nucleation and growth of a vapor bubble. In contrast, inclusions that trap melt plus vapor exhibit subdued CO₂ depletion at equivalent conditions. In the extreme case of inclusions that trap mostly the vapor phase (i.e., CO₂–H₂O fluid inclusions containing trapped melt), degassing of CO₂ from the melt is negligible. In the latter scenario, the large fraction of vapor enclosed in the MI during trapping essentially serves as a buffer, preventing post-entrapment modification of volatile concentrations in the melt. Hence, the glass phase within such heterogeneously entrapped, vapor-rich MI records the volatile concentrations of the melt at the time of trapping. These numerical modeling results suggest that heterogeneously entrapped MI containing large vapor bubbles represent amenable samples for constraining pre-eruptive volatile concentrations of subvolcanic melts.     

Volatiles H2O,CO2, and Cl in a subduction related basalt

The products of the 1974 eruption of Fuego, a subduction zone volcano in Guatemala, have been investigated through study of silicate melt inclusions in olivine. The melt inclusions sampled liquids in regions where olivine, plagioclase, magnetite, and augite were precipitating. Comparisons of the erupted ash, groundmass, and melt inclusion compositions suggest that the inclusions represent samples of liquids present in a thermal boundary layer of the magma body. The concentrations of H₂O and CO₂ in glass inclusions were determined by a vacuum fusion manometric technique using individual olivine crystals (Fo77 to Fo71) with glass inclusion compositions that ranged from high-alumina basalt to basaltic andesite. Water, Cl, and K₂O concentrations increased by a factor of two as the olivine crystals became more iron-rich (Fo77 to Fo71) and as the glass inclusions increased in SiO₂ from 51 to 54 wt.% SiO₂. The concentration of H₂O in the melt increased from 1.6 wt.% in the least differentiated liquid to about 3.5% in a more differentiated liquid. Carbon dioxide is about an order of magnitude less abundant than H₂O in these inclusions. The gas saturation pressures for pure H₂O in equilibrium with the melt inclusions, which were calculated from the glass inclusion compositions using the solubility model of Burnham (1979), are given approximately by P(H₂O)(Pa)=(SiO₂−48.5 wt.%) × 1.45 × 10⁷. The concentrations of water in the melt and the gas saturation pressures increased from about 1.5% to 3.5% and from 300 to 850 bars, respectively, during pre-eruption crystallization.     

Volatile element zonation in Campanian Ignimbrite magmas (Phlegrean Fields, Italy): evidence from the study of glass inclusions and matrix glasses

The distribution of H₂O, F, Cl and S in the Campanian Ignimbrite (CI) magma chamber was investigated through study of primary glass inclusions and matrix glasses from pumices of the Plinian fall deposit. The eruption, fed by trachytic to phono-trachytic magmas, mainly produced a trachytic non-welded to partially welded tuff, underlain by a minor cogenetic fallout deposit. The entire chemical variability of the eruptive products is well represented in the pumices of the Plinian fall deposit, which we divide into a basal Lower Fall Unit (LFU) and an overlying Upper Fall Unit (UFU). Primary glass inclusions were only found in clinopyroxenes associated with the LFU pumice and contain a mean of 1.60ǂ.32 wt% H₂O (analysed by FTIR), 0.11ǂ.08 wt% F, 0.37ǂ.03 wt% Cl and 0.08ǂ.04 wt% SO₃ (EMP analysis); CO₂ concentrations were below the FTIR detection limit (10-20 ppm). The coexisting matrix glasses contain similar amounts of halogens and sulfur but less water (~0.60 wt%). Partially degassed matrix glasses from UFU pumices contain a mean of 0.30ǂ.02 H₂O, 0.28ǂ.10 F, 0.04ǂ.02 SO₃ and 0.80ǂ.04 wt% Cl. To reconstruct the total amount of volatiles dissolved in the most evolved trachytes we have used experimental solubility data and mass balance calculations concerning the amount of crystal fractionation required to produce the most evolved trachyte from the least evolved trachyte; these yield an estimated pre-eruptive magma volatile content (H₂O + Cl + F) of ~5.5 wt% for the most evolved magmas. On the basis of new determinations of Cl solubility limits in hydrous trachytic melts coexisting with an aqueous fluid phase + hydrosaline melt (brine), we suggest that the upper part of the magma chamber which fed the CI eruption was fluid(s) saturated and at a minimum depth of ~2 km. Variations in eruptive style (Plinian fallout, pyroclastic flows) do not appear to be related to significant variations in pre-eruptive volatile contents.     

Genesis and mechanisms of formation of rare-metal peralkaline granites of the Khaldzan Buregtey massif,Mongolia: Evidence from melt inclusions

Melt inclusions were studied by various methods, including electron and ion microprobe analysis, to determine the compositions of melts and mechanisms of formation of rare-metal peralkaline granites of the Khaldzan Buregtey massif in Mongolia. Primary crystalline and coexisting melt inclusions were found in quartz from the rare-metal granites of intrusive phase V. Among the crystalline inclusions, we identified potassium feldspar, albite, tuhualite, titanite, fluorite, and diverse rare-metal phases, including minerals of zirconium (zircon and gittinsite), niobium (pyrochlore), and rare earth elements (parisite). The observed crystalline inclusions reproduce almost the whole suite of major and accessory minerals of the rare-metal granites, which supports the possibility of their crystallization from a magmatic melt. Melt inclusions in quartz from these rocks are completely crystallized. Their daughter mineral assemblage includes quartz, microcline, aegirine, arfvedsonite, polylithionite, a zirconosilicate, pyrochlore, and a rare-earth fluorocarbonate. The melt inclusions were homogenized in an internally heated gas vessel at a temperature of 850°C and a pressure of 3 kbar. After the experiments, many inclusions were homogeneous and consisted of silicate glass. In addition to silicate glass, some inclusions contained tiny quench zircon crystals confined to the boundary of inclusions, which indicates that the melts were saturated in zircon. In a few inclusions, glass coexisted with a CO₂ phase. This allowed us to estimate the content of CO₂ in the inclusion as 1.5 wt %. The composition of glasses from the homogeneous melt inclusions is similar to the composition of the rare-metal granites, in particular, with respect to SiO₂ (68–74 wt %), TiO₂ (0.5–0.9 wt %), FeO (2.2–4.6 wt %), MgO (0.02 wt %), and Na₂O + K₂O (up to 8.5 wt %). On the other hand, the glasses of melt inclusions appeared to be strongly depleted compared with the rocks in CaO (0.22 and 4 wt %, respectively) and Al₂O₃ (5.5–7.0 and 9.6 wt %, respectively). The agpaitic index is 1.1–1.7. The melts contain up to 3 wt % H₂O and 2–4 wt % F. The trace element analysis of glasses from homogenized melt inclusions in quartz showed that the rare-metal granites were formed from extensively evolved rare-metal alkaline melts with high contents of Zr, Nb, Th, U, Ta, Hf, Rb, Pb, Y, and REE, which reflects the metallogenic signature of the Khaldzan Buregtey deposit. The development of unique rare metal Zr–Nb–REE mineralization in these rocks is related to the prolonged crystallization differentiation of melts and assimilation of enclosing carbonate rocks.     

Chemical composition and crystallization conditions of trachybasalts from the Dzhida field, Southern Baikal volcanic area: Evidence from melt and fluid inclusions

Melt and fluid inclusions have been studied in olivine phenocrysts (Fo 81–79) from trachybasalts of the Southern Baikal volcanic area, Dzhida field. The melt inclusions were homogenized, quenched, and analyzed on an electron and ion microprobe. The study of homogenized glasses of nine inclusions showed that basaltic melts (SiO₂ = 47.1–50.3 wt %, MgO = 5.0–7.7 wt %, CaO = 7.1–11.1 wt %) have high contents of Al₂O₃ (17.1–19.6 wt %), Na₂O (4.1–6.2 wt %), K₂O (2.2–3.3 wt %), and P₂O₅ (0.6–1.1 wt %). The volatile contents are low (in wt %): 0.24–0.31 H₂O, 0.08 F, 0.03 Cl, and 0.02 S. Primary fluid inclusions in olivines from four trachybasalt samples contain high-density CO₂ (0.73–0.87 g/cm³), indicating a CO₂ fluid pressure of 4.3–6.6 kbar at 1200–1300°C and olivine crystallization depths of 16–24 km. Ion microprobe analyses of 20 glasses from melt inclusions for trace elements showed that the magmas of the Baikal rift were enriched in incompatible elements, thus differing from oceanic rift basalts and resembling oceanic island basalts. A comparison of our data on melt and fluid inclusions in olivine from trachybasalts of the Dzhida field with preexisting data on the Eastern Tuva volcanic highland in the Southern Baikal volcanic area showed that they had similar contents of volatiles, major, and trace elements.     

Evidence for a copper-bearing fluid in magma erupted at the Valley of ten thousand smokes,Alaska

Several lines of evidence point to the existence of a pre-eruptive fluid phase in the magmas erupted in 1912 at the Valley of Ten Thousand Smokes, Alaska. The discovery of rare, Cu-rich bubbles in some melt inclusions is best explained by the random entrapment of a low-density, fluid phase within growing phenocrysts. The H₂O, S and Cl concentrations of the high-silica rhyolite are also consistent with fluid saturation in the rhyolite. Water contents, as determined by infrared spectroscopy on doubly polished melt inclusions, cluster between 3.5 and 4.5 wt% H₂O, without any apparent differences between magmas vented explosively and effusively. These concentrations would be sufficient for H₂O saturation at a pressure of 100 MPa, though the presence of other volatiles such as CO₂ and SO₂ could allow saturation with respect to a fluid phase at higher pressures. The S, Cu and Cl contents of the phenocryst assemblages, as determined by XRF analyses, are too low to account for the decrease in the concentrations of S and Cu in the melt, and only modest increase in Cl, with differentiation. Therefore, the behavior of these volatile elements was controlled either by eryptic fractionation if phenocryst phasese or, more likely, by partitioning into a coexisting fluid phase. The presence of this low-density phase apparently provided metals such as Cu with a volatile phase into which they could partition; the concentration of Cu in this fluid reached tens to hundreds of times that of the coexisting silicate melt and may have been as rich as 0.05 wt% Cu. The distribution of Cu in the magma was also controlled by sulfides such as intermediate solid solution and pyrrhotite, which cyrstallized directly from the silicate melt.     

Strong tin enrichment in a pegmatite-forming melt

To investigate processes of magmatic tin enrichment and cassiterite deposition, we studied the abundances of major, trace, and volatile elements in a large number of rehomogenized silicate melt inclusions in quartz and topaz from a pegmatite body at the Ehrenfriedersdorf Sn–W deposit. This deposit is associated with evolved Variscan granites of the central Erzgebirge, southeast Germany. The melt inclusions are peraluminous; the molar aluminum saturation index (ASI) ranges from 1.15 to 2.0, and many inclusions are characterized by a very high content of fluxing components and volatiles. Some inclusions contain more than 20 wt% of H₂O, F, Cl, and P₂O₅, plus Li as well as very high levels of Sn. Some rare, highly evolved fractions of late-stage pegmatite-forming liquid at Ehrenfriedersdorf contained up to 7000 ppm Sn. The presence of hydrogen and methane in addition to water and carbon dioxide in the vapor phase of the melt inclusions suggests a very low oxygen fugacity for some fractions of magma. The extreme levels of tin, volatiles, and fluxing components in this magma had an important influence on processes of melt movement and cassiterite precipitation. Melts, like these, that are high in volatiles and alkalis (sum of Li₂O, Na₂O, K₂O, Rb₂O, and Cs₂O is >8 wt%) have low densities (≤1.8 g/cm³), low viscosities (<10 Pa.s at 700 °C), facilitate relatively rapid diffusion of ions through melts, and hence are excellent solvents for extracting and transporting ore-forming elements. Received: 1 February 1999 / Accepted: 19 January 2000     

Chemical composition,volatile components,and trace elements in melts of the Karymskii volcanic center,Kamchatka, and Golovnina volcano,Kunashir Island: Evidence from inclusions in minerals

Melt inclusions were examined in phenocrysts in basalt, andesite, dacite, and rhyodacite from the Karymskii volcanic center in Kamchatka and dacite form Golovnina volcano in Kunashir Island, Kuriles. The inclusions were examined by homogenization and by analyzing glasses in more than 80 inclusions on an electron microscope and ion microprobe. The SiO₂ concentrations in the melt inclusions in plagioclase phenocrysts from basalts from the Karymskii volcanic center vary from 47.4 to 57.1 wt %, these values for inclusions in plagioclase phenocrysts from andesites are 55.7–67.1 wt %, in plagioclase phenocrysts from the dacites and rhyodacites are 65.9–73.1 wt %, and those in quartz in the rhyodacites are 72.2–75.7 wt %. The SiO₂ concentrations in melt inclusions in quartz from dacites from Golovnina volcano range from 70.2 to 77.0 wt %. The basaltic melts are characterized by usual concentrations of major components (wt %): TiO₂ = 0.7–1.3, FeO = 6.8–11.4, MgO = 2.3–6.1, CaO = 6.7–10.8, and K₂O = 0.4–1.7; but these rocks are notably enriched in Na₂O (2.9–7.4 wt % at an average of 5.1 wt %, with the highest Na₂O concentration detected in the most basic melts: SiO₂ = 47.4–52.0 wt %. The concentrations of volatiles in the basic melts are 1.6 wt % for H₂O, 0.14 wt % for S, 0.09 wt % for Cl, and 50 ppm for F. The andesite melts are characterized by high concentrations (wt %) of FeO (6.5 on average), CaO (5.2), and Cl (0.26) at usual concentrations of Na₂O (4.5), K₂O (2.1), and S (0.07). High water concentrations were determined in the dacite and rhyodacite melts: from 0.9 to 7.3 wt % (average of 15 analyses equals 4.5 wt %). The Cl concentration in these melts is 0.15 wt %, and those of F and S are 0.06 and 0.01 wt %, respectively. Melt inclusions in quartz from the dacites of Golovnina volcano are also rich in water: they contain from 5.0 to 6.7 wt % (average 5.6 wt %). The comparison of melt compositions from the Karymskii volcanic center and previously studied melts from Bezymyannyi and Shiveluch volcanoes revealed their significant differences. The former are more basic, are enriched in Ti, Fe, Mg, Ca, Na, and P but significantly depleted in K. The melts of the Karymskii volcanic center are most probably less differentiated than the melts of Bezymyannyi and Shiveluch volcanoes. The concentrations of water and 20 trace elements were measured in the glasses of 22 melt inclusions in plagioclase and quartz from our samples. Unusually high values were obtained for Li concentrations (along with high Na concentrations) in the basaltic melts from the Karymskii volcanic center: from 118 to 1750 ppm, whereas the dacite and rhyolite melts contain 25 ppm Li on average. The rhyolite melts of Golovnina volcano are much poorer in Li: 1.4 ppm on average. The melts of the Karymskii volcanic center are characterized by relative minima at Nb and Ti and maxima at B and K, as is typical of arc magmas.     

Chemical composition,volatile components,and trace elements in the magmatic melt of the Kurama mining district,Middle Tien Shan: Evidence from the investigation of inclusions in quartz

Melt and fluid inclusions were investigated in six quartz phenocryst samples from the igneous rocks of the extrusive (ignimbrites and rhyolites) and subvolcanic (granite porphyries) facies of the Lashkerek Depression in the Kurama mining district, Middle Tien Shan. The method of inclusion homogenization was used, and glasses from more than 40 inclusions were analyzed on electron and ion microprobes. The chemical characteristics of these inclusions are typical of silicic magmatic melts. The average composition is the following (wt %): 72.4 SiO₂, 0.06 TiO₂, 13.3 Al₂O₃, 0.95 FeO, 0.03 MnO, 0.01 MgO, 0.46 CaO, 3.33 Na₂O, 5.16K₂O, 0.32 F, and 0.21 Cl. Potassium strongly prevails over sodium in all of the inclusions (K₂O/Na₂O averages 1.60). The average total of components in melt inclusions from five samples is 95.3 wt %, which indicates a possible average water content in the melt of no less than 3–4 wt %. Water contents of 2.0 wt % and 6.6 wt % were determined in melt inclusions from two samples using an ion microprobe. The analyses of ore elements in the melt inclusions revealed high contents of Sn (up to 970 ppm), Th (19–62 ppm, 47 ppm on average), and U (9–26 ppm, 18 ppm on average), but very low Eu contents (0.01 ppm). Melt inclusions of two different compositions were detected in quartz from a granite porphyry sample: silicate and chloride, the latter being more abundant. In addition to Na and K chlorides, the salt inclusions usually contain one or several anisotropic crystals and an opaque phase. The homogenization temperatures of the salt inclusions are rather high, from 680 to 820°C. In addition to silicate inclusions with homogenization temperatures of 820–850°C, a primary fluid inclusion of aqueous solution with a concentration of 3.7 wt % NaCl eq. and a very high density of 0.93 g/cm³ was found in quartz from the ignimbrite. High fluid pressure values of 6.5–8.3 kbar were calculated for the temperature of quartz formation. These estimates are comparable with values obtained by us previously for other regions of the world: 2.6–4.3 kbar for Italy, 3.7 kbar for Mongolia, 3.3–8.7 kbar for central Slovakia, and 3.3–9.6 kbar for eastern Slovakia. Unusual melt inclusions were investigated in quartz from another ignimbrite sample. In addition to a gas phase and transparent glass, they contain spherical Feoxide globules (81.2 wt % FeO) with high content of SiO₂ (9.9 wt %). The globules were dissolved in the silicate melt within a narrow temperature range of 1050–1100°C, and the complete homogenization of the inclusions was observed at temperatures of 1140°C or higher. The combined analysis of the results of the investigation of these inclusions allowed us to conclude that immiscible liquids were formed in the high-temperature silicic magma with the separation of iron oxide-dominated droplets.     

Magmatic processes in the Bishop Tuff rhyolitic magma based on trace elements in melt inclusions and pumice matrix glass

To investigate the origin of compositional zonation in the Bishop Tuff magma body, we have analyzed trace elements in the matrix glass of pumice clasts and in quartz-hosted melt inclusions. Our results show contrasting patterns for quartz in different parts of the Bishop Tuff. In all samples from the early part of the eruption, trace element compositions of matrix glasses are similar to but slightly more evolved than quartz-hosted melt inclusions. This indicates a cogenetic relationship between quartz crystals and their surrounding matrix glass, consistent with in situ crystallization. The range of incompatible element concentrations in melt inclusions and matrix glass from single pumice clasts requires 16–20 wt% in situ crystallization. This is greater than the actual crystal content of the pumices (<15 % crystals). In contrast to the pattern for the early pumices, pyroclastic flow samples from the middle part of the eruption show contrasting trends: In some clasts, the matrix is more evolved than the inclusions, whereas in other clasts, the matrix is less evolved. In the late Bishop Tuff, all crystal-rich samples have matrix glasses that are less evolved than the melt inclusions. Trace element abundances indicate that the cores of quartz in the late Bishop Tuff crystallized from more differentiated rhyolitic magma that was similar in many ways, yet distinct from the early-erupted Bishop Tuff. Our results are compatible with a model of secular incremental zoning (Hildreth and Wilson in Compositional zoning of the Bishop Tuff. J Petrol 48(5):951–999, 2007), in which melt batches from underlying crystal mush rise to various levels in a growing magma body according to their buoyancy. Early- and middle-erupted quartz crystallized from highly evolved rhyolitic melt, but then some parts of the middle-erupted magma were invaded by less differentiated rhyolite such that the matrix melt at the time of eruption was less evolved than the melt inclusions. A similar process occurred but to a greater extent in magma that erupted to form the late Bishop Tuff. In addition, there was a final, major magma mixing event in the late magma that formed Ti-rich rims on quartz and Ba-rich rims on sanidine, trapped less evolved rhyolitic melt inclusions, and resulted in dark and swirly crystal-poor pumice that is a rare type throughout much of the Bishop Tuff.     

Crystallization conditions of the alkaline-basic dike from the Yllymakh Massif,Central Aldan: Evidence from melt inclusion data in minerals

Alkaline-basic dike from the Yllymakh Massif (Central Aldan) has been studied. Its partially crystallized matrix contains corroded phenocrysts of olivine and hypidiomorphic phenocrysts of clinopyroxene and pseudo-, epileucite. It was found that phenocrysts of clinopyroxene contain abundant primary inclusions, Ti-magnetite and apatite bear only single inclusions, whereas olivine is enriched in secondary inclusions, which are confined to the cleavage of host mineral (along second and third pinacoids) and its cracks. The homogenization temperatures of the primary inclusions in clinopyroxene and secondary inclusions in olivine are approximately equal and lie within 1260–1240°C. The compositions of melt inclusions in olivine and clinopyroxene are also similar and corresponded to the malignite-pseudoleucite phonolite-monzonite pulaskites, which are developed at the Yllymakh Massif. Unheated inclusions in apatite and Ti-magnetite compositionally approach monzonites and nepheline syenites—tinguaites, respectively. It was concluded that the alkaline basaltoid magma was presumably parental magma for the entire rock complex of the Yllymakh Massif. Its crystallization and differentiation presumably provided all observed rock variety from ultrabasics (early derivatives located at depth) and malignites (later derivatives) to leucite phonolites, monzonites, and alkaline pulaskites, which were obtained during subsequent stages of the melt evolution. The parental magma, and especially its derivatives, were enriched in BaO (0.8–0.1 wt %), Cl (0.1–0.3 wt %) and trace elements (primarily, LREE and MREE), which are several times higher than mantle values. At the same time, ion microprobe (SIMS) study showed that derivative melts were dry: contained only 0.01–1.13 wt % H₂O. The trend of melts conserved in the minerals and the massif rocks corresponds to the evolution of alkalinebasaltoid magma with increase in Si, Al, alkalis and decrease in Mg, Ca, and Fe, i.e. the Bowen trend. The considered alkaline-basic dike was presumably formed from the derivative of leucite-phonolite melt, which during emplacement captured olivine xenocrysts from previously fractionated ultrabasic rocks. The parental magma was presumably derived by high-degree melting of garnet-spinel-facies depleted mantle at some influence of crustal material.