Geochemical characteristics of shallow groundwater in Datong basin, northwestern China

Located in semi-arid regions of northwestern China, Datong basin is a Quaternary sedimentary basin, where groundwater is the most important source for water supply. It is very important to study groundwater characteristics and hydrogeochemical processes for better management of the groundwater resource. We have identified five geochemical zones of shallow groundwater (between 5 and 80 m) at Datong: A. Leaching Zone (Zone I); B. Converging Zone (Zone II); C. Enriching Zone (Zone III); D. Reducing Zone (Zone IV); E. Oxidizing Zone (Zone V). In Zones I, II, and V and some parts of Zones III and IV, hydrolysis of albite/K-feldspar/chalcedony system and/or albite/K-feldspar/quartz system enhanced concentrations of Na⁺, K⁺, HCO₃⁻ and silicate. In Zone I, dissolution of carbonate and hydrolysis of feldspar generally controlled the groundwater chemistry. Infiltration of meteoric water promoted the formation of HCO₃⁻ in the water. In Zone II, the main geochemical processes influencing the groundwater chemistry were dissolutions of calcite and dolomite, ion exchange and evaporation. In Zones III and IV, in addition to ion exchange, evaporation and precipitation of calcite and dolomite, leaching of NaHCO₃ in saline–alkaline soils dominated the water quality. Zone IV was under anoxic condition, and reduction reactions led to the decrease of SO₄²⁻, NO₃⁻ and occurrence of H₂S, with the highest arsenic content (mean value of 366 μg/L), far exceeding Maximum Contaminant Level (MCL). Abnormal arsenic in the groundwater resulted in endemic disease of waterborne arsenic poisoning among local people. Zone V overlapped Zone I was intensively affected by coal mining activities. Sulfide minerals, such as pyrite, would have been oxidized when exposed to air due to coal mining, which directly added sulfate to groundwater and thus increased SO₄²⁻ concentration. Oxidization of sulfide minerals also decreased pH and promoted dissolutions of calcite and dolomite.     

Fluid geochemistry in the Ivigtut cryolite deposit, South Greenland

The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na₃AlF₆] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO₂, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO₂ and H₂O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ¹³C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ¹⁸O of CO₂ (+ 21 to + 42‰ VSMOW) and δ¹⁸O of H₂O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H₂O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.     

Modelling ion composition in seepage water from a column experiment with an open cut coal mine sediment

Secondary reactions occurring in pyrite-containing sediments from open cut coal mines are complex and not fully understood. In this study, the changes in seepage water composition in a column experiment with a sediment containing pyrite (5.6 g kg⁻¹) were evaluated using a chemical equilibrium model. A column experiment with artificial irrigation (730 mm water yr⁻¹) was carried out for 2 yr with a sediment from the open pit mine Garzweiler, Germany, at the Institute of Applied Geology. Tracer (LiCl) was added to the sediment. Seepage water composition at 52 cm depth was sampled weekly. Redox potential and the water potential were also recorded weekly. Sulphate and Fe(II) were the dominant ions in the seepage water with concentration maxima of 500 and 350 mmol l⁻¹ after 50 days (0.7 pore volumes (PV)). Minimum pH values were around 0.8 after 100 days (1.4 PV), but increased subsequently and reached 2.4 after 700 days (9.5 PV). Ion activity product calculations indicated the intermediate formation of gypsum (19th–480th day of the experiment). Solutions were undersaturated with respect to alunite, jarosite, jurbanite, schwertmannite, melanterite, gibbsite and goethite during the whole experiment. The model of coupled equilibria which included inorganic complexation, precipitation/dissolution of gypsum and multiple cation exchange was tested. Pyrite oxidation and pH-dependent silicate weathering were considered using simple input functions. Transport was modelled using a field capacity cascade submodel. Model results showed satisfactory agreement with measured values for pH and concentrations of SO₄, Fe, Mg, Ca and Al. Correlation coefficients lay between 0.7 and 0.9 and linear regression coefficients (modelled against measured) were 1.5 (Ca), 1.0 (Fe, SO₄), 0.8 (Mg), 0.7 (pH) and 0.6 (Al). The results showed that the protons produced during pyrite oxidation (94 mmol_c H⁺ kg⁻¹) were mainly released into seepage water (as HSO₄⁻ and H⁺). Cation exchange reactions buffered 20 mmol_c of H⁺ kg⁻¹ sediment, and Al released by silicate weathering accounted for 3.6 mmol_c H⁺ kg⁻¹. Modelling was useful to further understand the significance of different pH buffer reactions.     

The aqueous geochemistry of Zr and the solubility of some Zr-bearing minerals

Literature data on the thermodynamics of complexation of Zr with inorganic species, at 25°C, have been critically reviewed. The preponderance of published complexation constants deal with F⁻ and OH⁻ ions. Stability constants for the complexation reactions are relatively independent of ionic strength and thus recomended values for each ligand type are averages of the most reliable data. Complexation constants under elevated conditions (T 250°C andP_v = P_H2O) have been predicted for various Zr complexes (F⁻, Cl⁻, SO₄²⁻ and OH⁻) using Helgeson's electrostatic approach. Predominance diagrams (calculated for simple systems with these constants) suggest that, over a wide range of pH conditions, Zr(OH)_4(aq) will dominate the aqueous geochemistry of Zr except under very high activities of competing ligands (e.g., F⁻, SO₄²⁻).The solubilities of vlasovite [Na₂ZrSi₄O₁₁] and weloganite [Sr₃Na₂Zr(CO₃)₆·3H₂O have been measured in KCI solutions (0.5–1.0 M) at 50°C. Weloganite dissolution is complicated by the predictable precipitation of strontianite (SrCO₃) whereas vlasovite dissolves incongruently. Solubility products for the dissolution of welonganite and vlasovite are determined to be −28.96±0.14 and −20.40±1.18, respectively. Concentrations of Zr up to 10⁻³ m were present in the experimental solutions; the presence of large amounts of Zr in aqueous solutions support the possibility of extensive remobilization of Zr during hydrothermal mineralization.     

Chemistry and sulfur isotopic composition of precipitation at Bologna, Italy

Individual and monthly precipitation samples from the polluted atmosphere of Bologna (Emilia-Romagna province) were collected during March 1996 to May 1997 and analyzed for major ions in solution and S isotopes in dissolved SO₄.Weighted mean enrichment factors relative to seawater are found to be 1.0 for Na, 15.2 for K, 105 for Ca, 3.3 for Mg, 17.3 for SO₄ and 663 for HCO⁻₃. Very good positive correlations are observed for the Ca²⁺–Mg²⁺–HCO⁻₃–SO²⁻₄–NO⁻₃ system, indicating that dissolution of Ca (±Mg)-carbonate particles by H₂SO₄ and HNO₃ from combustion of oil and gas is a major process controlling the chemical composition of rain and snow. Na⁺ and Cl⁻ in monthly precipitation derive essentially from sea spray, but the contribution of Na⁺ from continental sources is appreciable in a number of individual rains. NH⁺₄ appears to be on average more abundant in spring and summer precipitation, its main sources being microbial activity in soils and application of fertilizers. K⁺ is probably of continental origin from soil dust.The S isotopic composition of SO₄ is systematically positive, with mean δ³⁴S values of +3.2±1.6‰ (n=40) in individual precipitation and +2.8±1.4‰ (n=12) in monthly precipitation. These isotopic compositions are interpreted in terms of a dominant contribution of S from anthropogenic emissions and subordinate contributions from biogenic and marine sources. Pollutant SO₄ is estimated to have a δ³⁴S value in the range +2.5 to +4.5‰, whereas a distinctive δ³⁴S of −4.5‰ or lower indicates SO₄ from oxidation of biogenic gases.The isotopic and chemical compositions of SO₄ do not depend on wind direction, thus testifying to a mostly local source for pollutant S in the Bologna atmosphere.     

Petrology and isotopic geochemistry of dawsonite-bearing sandstones in Hailaer basin, northeastern China

The CO₂ gas reservoir sandstones in the Hailaer Basin contain abundant dawsonite and provide an ideal laboratory to study whether any genetic relationship exists between dawsonite and the modern gas phase of CO₂. The origins of dawsonite and CO₂ in these sandstones were studied by petrographic and isotopic analysis. According to the paragenetic sequence of the sandstones, dawsonite grew later than CO₂ charging at 110–85 Ma. The dawsonite δ¹⁸O value is 7.4‰ (SMOW), and the calculated δ¹⁸O values of the water present during dawsonite growth are from −11.4‰ to −9.2‰ (SMOW). This, combined with the NaHCO₃-dominated water linked to dawsonite growth, suggests meteoric water being responsible for dawsonite growth. The δ¹³C values of gas phase CO₂ and the ratios of ³He/⁴He of the associated He suggest a mantle magmatic origin of CO₂-rich natural gas in Hailaer basin. Dawsonite δ¹³C values are −5.3‰ to −1.5‰ (average −3.4‰), and the calculated δ¹³C values of CO₂ gas in isotopic equilibrium with dawsonite are −11.4‰ to −7.3‰. These C isotopic values are ambiguous for the dawsonite C source. From the geological context, the timing of events, together with formation water conditions for dawsonite growth, dawsonite possibly grew in meteoric-derived water, atmospherically-derived CO₂ maybe, or at least the dominant, C source for dawsonite. It seems that there are few relationships between dawsonite and the modern gas phase of CO₂ in the Hailaer basin.     

As–(Ag) sulphide veins in the Spanish Central System: further evidence for a hydrothermal event of Permian age

The Spanish Central System (SCS) has been subjected to repeated deformation and fluid flow events which have produced both sulphide-bearing and barren vein systems. Although several hydrothermal episodes took place between 300 and 100 Ma, fluid circulation during the Permian was especially important, giving rise to a range of different types of deposits. This study presents a multidisciplinary approach leading to the characterisation of the chemistry and age of the hydrothermal fluids that produced the As–(Ag) mineralised stockwork of Mónica mine (Bustaviejo, Madrid). Fluid inclusion data indicate the presence of two different fluids. An initial ore stage (I) formed from a low- to moderate salinity (3–8 wt.% eq. NaCl) H₂O–NaCl–CO₂–CH₄ fluid, at minimum trapping temperature of 350±15 °C and 0.3 kbar. A second H₂O–NaCl fluid is found in three types of fluid inclusions: a high temperature and low salinity type (340±20 °C; 0.8–3.1 wt.% eq. NaCl) also associated to ore stage I, a moderate temperature and very low salinity type (160–255 °C; 0–1.5 wt.% eq. NaCl) represented in ore stage III, and a very low temperature and hypersaline type (60–70 °C; 30–35 wt.% NaCl), unrelated to the mineralising stages and clearly postdating the previous types. ⁴⁰Ar–³⁹Ar dating on muscovite from the early As–Fe stage (I) has provided an age of 286±4 Ma, synchronous with the late emplacement phases of La Cabrera plutonic massif (288±5 Ma) and with other Permian hydrothermal events like Sn–W skarns and W–(Sn) sulphide veins. δ¹⁸O of water in equilibrium with stage I quartz (5.3–7.7‰), δD of water in equilibrium with coexisting muscovite (−16.0‰ to −2.0‰), and sulphide δ³⁴S (1.5–3.6‰) values are compatible with waters that leached metamorphic rocks. The dominant mechanism of the As–(Ag) deposition was mixing and dilution processes between aqueous–carbonic and aqueous fluids for stage I (As–Fe), and nearly isobaric cooling processes for stages II (Zn–Cu–Sn) and III (Pb–Ag). The origin and hydrothermal evolution of As–(Ag) veins is comparable to other hydrothermal Permian events in the Spanish Central System.     

Geology and geochemistry of the adjacent Changkeng gold and Fuwang silver deposits, Guangdong Province, South China

The Changkeng Au and Fuwang Ag deposits represent an economically significant and distinct member of the Au–Ag deposit association in China. The two deposits are immediately adjacent, but the Au and Ag orebodies separated from each other. Ores in the Au deposit, located at the upper stratigraphic section and in the southern parts of the orefield, contain low Ag contents (< 11 ppm); the Ag orebodies, in the lower stratigraphic section, are Au-poor (< 0.2 ppm). Changkeng is hosted in brecciated cherts and jasperoidal quartz and is characterized by disseminated ore minerals. Fuwang, hosted in the Lower Carboniferous Zimenqiao group bioclastic limestone, has vein and veinlet mineralization associated with alteration comprised of quartz, carbonate, sericite, and sulfides. Homogenization temperatures of fluid inclusions from quartz veinlets in the Changkeng and Fuwang deposits are in the range of 210 ± 80 °C and 230 ± 50 °C, respectively. Salinities of fluid inclusions from the two deposits range from 1.6 to 7.3 wt.% and 1.6 to 2.6 wt.% equiv. NaCl, respectively. The δD_H2O, δ¹⁸O_H2O, δ¹³C_CO2 and ³He/⁴He values of the fluid inclusions from the Changkeng deposit range from − 80‰ to − 30‰, − 7.8‰ to − 3.0‰, − 16.6‰ to − 17.0‰ and 0.0100 to 0.0054 Ra, respectively. The δD_H2O, δ¹⁸O_H2O, δ¹³C_CO2 and ³He/⁴He values of fluid inclusions from the Fuwang deposit range from − 59‰ to − 45‰, − 0.9‰ to 4.1‰, − 6.7‰ to − 0.6‰ and 0.5930 to 0.8357 Ra, respectively. The δD_H2O, δ¹⁸O_H2O, δ¹³C_CO2 and ³He/⁴He values of the fluid inclusions suggest the ore fluids of the Changkeng Au-ore come from the meteoric water and the ore fluids of the Fuwang Ag-ore are derived from mixing of magmatic water and meteoric water. The two deposits also show different Pb-isotopic signatures. The Changkeng deposit has Pb isotope ratios (²⁰⁶Pb/²⁰⁴Pb: 18.580 to 19.251, ²⁰⁷Pb/²⁰⁴Pb: 15.672 to 15.801, ²⁰⁸Pb/²⁰⁴Pb: 38.700 to 39.104) similar to those (²⁰⁶Pb/²⁰⁴Pb: 18.578 to 19.433, ²⁰⁷Pb/²⁰⁴Pb: 15.640 to 15.775, ²⁰⁸Pb/²⁰⁴Pb: 38.925 to 39.920) of its host rocks and different from those (²⁰⁶Pb/²⁰⁴Pb: 18.820 to 18.891, ²⁰⁷Pb/²⁰⁴Pb: 15.848 to 15.914, ²⁰⁸Pb/²⁰⁴Pb: 39.579 to 39.786) of the Fuwang deposit. The different signatures indicate different sources of ore-forming material. Rb–Sr isochron age (68 ± 6 Ma) and ⁴⁰Ar–³⁹Ar age (64.3 ± 0.1 Ma) of the ore-related quartz veins from the Ag deposit indicate that the Fuwang deposit formed during the Cenozoic Himalayan tectonomagmatic event. Crosscutting relationships suggests that Au-ore predates Ag-ore. The adjacent Changkeng and Fuwang deposits could, however, represent a single evolved hydrothermal system. The ore fluids initially deposited Au in the brecciated siliceous rocks, and then mixing with the magmatic water resulted in Ag deposition within fracture zones in the limestone. The deposits are alternatively the product of the superposition of two different geological events. Age evidence for the Fuwang deposit, together with the Xiqiaoshan Tertiary volcanic-hosted Ag deposit in the same area, indicates that the Pacific Coastal Volcanic Belt in the South China Fold Belt has greater potential for Himalayan precious metal mineralization than previous realized.     

Zero-valent iron and organic carbon mixtures for remediation of acid mine drainage: Batch experiments

A series of laboratory batch experiments was conducted to evaluate the potential for treatment of acid mine drainage (AMD) using organic C (OC) mixtures amended by zero-valent Fe (Fe⁰). Modest increases in SO₄ reduction rates (SRRs) of up to 15% were achieved by augmenting OC materials with 5 and 10 dry wt% Fe⁰. However, OC was essential for supporting SO₄ reducing bacteria (SRB) and therefore SO₄ reduction. This observation suggests a general absence of autotrophic SRB which can utilize H₂ as an electron donor. Sulfate reduction rates (SRRs), calculated using a mass-based approach, ranged from −12.9 to −14.9 nmol L⁻¹ d⁻¹  g⁻¹ OC. Elevated populations of SRB, iron reducing bacteria (IRB), and acid producing (fermentative) bacteria (APB) were present in all mixtures containing OC. Effective removal of Fe (91.6–97.6%), Zn (>99.9%), Cd (>99.9%), Ni (>99.9%), Co (>99.9%), and Pb (>95%) was observed in all reactive mixtures containing OC. Abiotic metal removal was achieved with Fe⁰ only, however Fe, Co and Mn removal was less effective in the absence of OC. Secondary disordered mackinawite [Fe_1+xS] was observed in field-emission scanning electron microscopy (FE-SEM) backscatter electron micrographs of mixtures that generated SO₄ reduction. Energy dispersive X-ray (EDX) spectroscopy revealed that Fe–S precipitates were Fe-rich for mixtures containing OC and Fe⁰, and S-rich in the absence of Fe⁰ amendment. Sulfur K-edges determined by synchrotron-radiation based bulk X-ray absorption near-edge structure (XANES) spectroscopy indicate solid-phase S was in a reduced form in all mixtures containing OC. Pre-edge peaks on XANES spectra suggest tetragonal S coordination, which is consistent with the presence of an Fe–S phase such as mackinawite. The addition of Fe⁰ enhanced AMD remediation over the duration of these experiments, however long-term evaluation is required to identify optimal Fe⁰ and OC mixtures.     

Phase Chemistry Study of the Zabuye Salt Lake Brine: Isothermal Evaporation at 15°C and 25°C

Zabuye Salt Lake in Tibet, China is a carbonate-type salt lake, which has some unique characteristics that make it different from other types of salt lakes. The lake is at the latter period in its evolution and contains liquid and solid resources. Its brine is rich in Li, B, K and other useful minor elements that are of great economic value. We studied the concentration behavior of these elements and the crystallization paths of salts during isothermal evaporation of brine at 15°C and 25°C. The crystallization sequence of the primary salts from the brine at 25°C is halite (NaCl) → aphthitalite (3K2SO4·Na2SO4) → zabuyelite (Li2CO3)→ trona (Na2CO3·NaHCO3·2H2O) → thermonatrite (Na2CO3·H2O) → sylvite (KCl), while the sequence is halite (NaCl) → sylvite (KCl) → trona (Na2CO3·NaHCO3·2H2O) → zabuyelite (Li2CO3) → thermonatrite (Na2CO3·H2O) → aphthitalite (3K2SO4·Na2SO4) at 15°C. They are in accordance with the metastable phase diagram of the Na+, K+-Cl?, CO32?, SO42?-H2O quinary system at 25°C, except for Na2CO3·7H2O which is replaced by trona and thermonatrite. In the 25°C experiment, zabuyelite (Li2CO3) was precipitated in the early stage because Li2CO3 is supersaturated in the brine at 25°C, in contrast with that at 15°C, it precipitated in the later stage. Potash was precipitated in the middle and late stages in both experiments, while boron was concentrated in the early and middle stages and precipitated in the late stage.     

CO2 and sulfuric acid controls of weathering and river water composition

Reactions of CO₂ with carbonate and silicate minerals in continental sediments and upper part of the crystalline crust produce HCO₃⁻ in river and ground waters. H₂SO₄ formed by the oxidation of pyrite and reacting with carbonates may produce CO₂ or HCO₃⁻. The ratio, ψ, of atmospheric or soil CO₂ consumed in weathering to HCO₃⁻ produced depends on the mix of CO₂ and H₂SO₄, and the proportions of the carbonates and silicates in the source rock. An average sediment has a CO₂ uptake potential of ψ = 0.61. The potential increases by inclusion of the crystalline crust in the weathering source rock. A mineral dissolution model for an average river gives ψ = 0.68 to 0.72 that is within the range of ψ = 0.63 to 0.75, reported by other investigators using other methods. These results translate into the CO₂ weathering flux of 20 to 24 × 10¹²mol/yr.     

Origins of high nitrate in groundwater in Tanzania

Dodoma is located in a semi-arid climate (mean annual rainfall 550 mm) in an area of crystalline basement rock. The groundwater contains high nitrate with NO₃⁻ concentrations averaging 150 mg l⁻¹ and total mineralization between 1000–3000 mg l⁻¹. Factor analysis has been used for the identification of factors that bring about the chemical character of groundwater. Three rotated factors, explaining 77.2% of the total data variance, were extracted. The first factor accounts for 51.0% of the variance and shows high positive correlation with Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻, SO₄²⁻, HCO₃⁻ and SEC and is attributed to the leaching of surface and soil salts together with mineral dissolution. The second factor accounts for 14.1% of the variance and is positively correlated with NO₃⁻ and negatively correlated with pH; this is explained by the nitrification process taking place on the sewage effluents. The third factor is highly positively correlated with ¹⁸O and ²H, accounting for 12.1% of the variance and is a consequence of evaporation processes. Nitrate concentrations greater than 100 mg l⁻¹ are commonly found in both deep and shallow groundwaters. It is concluded that the high nitrate concentrations have originated from the sewage effluents that are advecting and dispersing through macropores under bypass flow mechanisms.     

Simultaneous determination of sulfide, polysulfides and thiosulfate as an aid to ore exploration

The interaction of water and sulfide minerals yields dissolved species which can be utilized to trace back the presence of sulfide minerals and associated minerals. Computer modeling and laboratory and field results show that the most characteristic dissolved species are hydrogen sulfide (H₂S, HS⁻), polysulfide ions (S_n²⁻) and thiosulfate (S₂O₃²⁻), derived from the hydrolysis of sulfide minerals. Typical concentration ranges are: 10⁻⁵ – 10⁻⁷ mole/l for hydrogen sulfide, 10⁻⁶ – 10⁻⁹ mole/l for polysulfides and 10⁻⁵ – 10⁻⁸ mole/l for thiosulfate. The chemical reactivity of these species at contact with air makes them difficult to assess unless determined immediately after sampling.These sulfur species can be determined rapidly and accurately in field conditions by simultaneous titration with mercuric chloride employing an Ag/Ag₂S electrode for the determination of the end points.The application to ore exploration is exemplified by the results of the research on roll-type uranium deposits in the southwest of France.     

Experimental study of aluminum speciation in fluoride-rich supercritical fluids

The solubility of the albite-paragonite-quartz mineral assemblage was measured as a function of NaCl and fluorine concentration at 400°C, 500 bars and at 450°C, 500 and 1000 bars. Decreasing Al concentrations with increasing NaCl molality in F-free fluids of low salinity (mNaCl < 0.01) demonstrates that Al(OH)₄⁻ dominates Al speciation and is formed according to the reaction 0.5 NaAl₃Si₃O₁₂H_2(cr)+2 H₂O = 0.5 NaAlSi₃O_8(cr)+Al(OH)₄⁻+H⁺. Log K results for this reaction are −11.28 ± 0.10 and −10.59 ± 0.10 at 400°C, 500 bars and 450°C, 1000 bars, respectively. Upon further salinity increase, Al concentration becomes constant (at 400°C, 500 bars) or even rises (at 450°C, 1000 bars). The observed Al behavior can be explained by the formation of NaAl(OH)₄⁰_(aq) or NaAl(OH)₃Cl_(aq)⁰. The calculated constant for the reaction Al(OH)₄⁻+Na⁺=NaAl(OH)₄⁰_(aq) expressed in log units is equal to 2.46 and 2.04 at 400°C, 500 bars and 450°C, 1000 bars, respectively. These values are in good agreement with the predictions given in Diakonov et al. (1996). Addition of fluoride at m(NaCl) = const = 0.5 caused a sharp increase in Al concentration in equilibrium with the albite-paragonite-quartz mineral assemblage. As fluid pH was also constant, this solubility increase indicates strong aluminum-fluoride complexation with the formation of NaAl(OH)₃F_(aq)⁰ and NaAl(OH)₂F₂⁰_(aq), according to 0.5 NaAl₃Si₃O₁₂H_2(cr)+Na⁺+HF_(aq)⁰+H₂O = 0.5 NaAlSi₃O_8(cr)+ NaAl(OH)₃F_(aq)⁰+H⁺, log K = −5.17 and −5.23 at 400°C and 450°C, 500 bars, respectively, and 0.5 NaAl₃Si₃O₁₂H_2(cr)+Na⁺+2 HF_(aq)⁰ = 0.5 NaAlSi₃O_8(cr)+NaAl(OH)₂F₂⁰_(aq)+H⁺, log K = −2.19 and −1.64 at the same P-T conditions. It was found that temperature increase and pressure decrease promote the formation of Na-Al-OH-F species. Stability of NaAl(OH)₂F₂⁰_(aq) in low-density fluids also increases relative to NaAl(OH)₃F_(aq)⁰. These complexes, together with Al(OH)₂F_(aq)⁰ and AlOHF₂⁰_(aq), whose stability constants were calculated from the corundum solubility measured by Soboleva and Zaraisky (1990) and Zaraisky (1994), are likely to dominate Al speciation in metamorphic fluids containing several ppm of fluorine.     

Ion microprobe U–Pb dating of zircon with a 15 micrometer spatial resolution using NanoSIMS

We developed a ²³⁸U–²⁰⁶Pb and ²⁰⁷Pb–²⁰⁶Pb zircon dating method using a Cameca NanoSIMS NS50 ion microprobe. A 7-to 9-nA O⁻ primary beam was used to sputter a 15-μm crater, and secondary positive ions were extracted for mass analysis using the Mattauch–Herzog geometry. The multicollector system was modified to detect ⁹⁰Zr⁺, ²⁰⁴Pb⁺, ²⁰⁶Pb⁺, ²³⁸U¹⁶O⁺, and ²³⁸U¹⁶O₂⁺ ions simultaneously. A mass resolution of about 4000 at 10% peak height and with a flat peak top was attained, and the sensitivity of Pb was about 4 cps·nA^− 1·ppm^− 1. A multicrystal zircon standard (QGNG) from South Australia with a U–Pb age of 1842 Ma was used as a reference for Pb⁺/UO⁺–UO₂⁺/UO⁺ calibration, and on the basis of the positive correlation between these ratios, we determined the sample ²⁰⁶Pb/²³⁸U ratios. ²⁰⁷Pb/²⁰⁶Pb ratios were measured by magnetic scanning in single-collector mode. The standard zircons 91500, from Canada, and SL13, from Sri Lanka, were analyzed against QGNG. Observed ²³⁸U–²⁰⁶Pb and ²⁰⁷Pb–²⁰⁶Pb ages agreed well with published ages within experimental error. Then, 16 zircon grains in a metamorphic rock from Nagasaki, Japan, were analyzed. Observed ages were compatible with SHRIMP ages, suggesting that the NanoSIMS with a 15-μm probe diameter is suitable for ion microprobe U–Pb zircon dating.     

Mercury mobilization by oxidative dissolution of cinnabar (α-HgS) and metacinnabar (β-HgS)

Cinnabar (α-HgS) and metacinnabar (β-HgS) dissolved at environmentally significant rates in oxygenated slurry experiments simulating a low-flow fluvial system. Based on SO₄²⁻ production, cinnabar dissolution rates were 2.64 to 6.16 μmol (SO₄²⁻) m^− 2 day^− 1, and metacinnabar dissolution rates were 1.20 to 1.90 μmol (SO₄²⁻) m^− 2 day^− 1. Monodentate-bound thiosulfate (S₂O₃²⁻) was identified as an oxidation product on the HgS surface by ATR-IR spectroscopy based on strong infrared absorption bands in the 1140–1145 cm^− 1 and 1006–1014 cm^− 1 regions. The presence of sulfide oxidation intermediates on the HgS surface indicates that SO₄²⁻ concentration underestimates α-HgS and β-HgS dissolution in this setting. Mercury release rates during dissolution were more than two orders of magnitude less than SO₄²⁻ production, but were significant: 0.47 mg (Hg) m^− 2 y^− 1 from cinnabar [6.45 nmol (Hg) m^− 2 day^− 1], and 0.17 mg (Hg) m^− 2 y^− 1 from metacinnabar [2.29 nmol (Hg) m^− 2 day^− 1]. The Hg mobilized during α-HgS and β-HgS dissolution is sufficient to form natural Au–Hg amalgam in downstream placer settings. The proportion of mercury that is not remobilized during α-HgS and β-HgS dissolution likely adsorbs to the dissolving mercuric sulfide. Adsorption of Hg²⁺ to cinnabar was detected in situ by anodic stripping voltammetry using a cinnabar-modified carbon paste electrode following accumulation of Hg²⁺ on the electrode at open circuit potential.     

Solution mechanisms of silicate in aqueous fluid and H2O in coexisting silicate melts determined in-situ at high pressure and high temperature

The structure of H₂O-saturated silicate melts, coexisting silicate-saturated aqueous solutions, and supercritical silicate liquids in the system Na₂O·4SiO₂–H₂O has been characterized with the sample at high temperature and pressure in a hydrothermal diamond anvil cell (HDAC). Structural information was obtained with confocal microRaman and with FTIR microscopy. Fluids and melts were examined along pressure-temperature trajectories defined by the isochores of H₂O at nominal densities, ρ_fluid, (from EOS of pure H₂O) of 0.90 and 0.78 g/cm³. With ρ_fluid = 0.78 g/cm³, water-saturated melt and silicate-saturated aqueous fluid coexist to the highest temperature (800 °C) and pressure (677 MPa), whereas with ρ_fluid = 0.90 g/cm³, a homogeneous single-phase liquid phase exists through the temperature and pressure range (25–800 °C, 0.1–1033 MPa). Less than 5 vol% quartz precipitates near 650 °C in both experimental series, thus driving Na/Si-ratios of melt + fluid phase assemblages to higher values than that of the Na₂O·4SiO₂ starting material.Molecular H₂O (H₂O°) and structurally bonded OH groups were observed in coexisting melts and fluids as well as in supercritical liquids. Their OH/(H₂O)-ratio is positively correlated with temperature. The OH/(H₂O)° in melts is greater than in coexisting fluids. Structural units of Q³, Q², Q¹, and Q⁰ type are observed in all phases under all conditions. An expression of the form, 12Q³ + 13H₂O2Q² + 6Q¹ + 4Q⁰, describes the equilibrium among those structural units. This equilibrium shifts to the right with increasing pressure and temperature with a ΔH of the reaction near 425 kJ/mol.     

Mineral chemistry and chemical zoning in tourmalines, Pampa del Tamboreo, San Luis, Argentina

Tourmalinites that are distally associated with tungsten deposits of the Pampa del Tamboreo area, San Luis, Argentina, contain tourmalines retaining evidence for its origin and evolution. Tourmaline grains uncommonly contain small grains of detrital tourmaline. Analysis of a single detrital tourmaline grain reveals that it is a Ca-rich “oxy-dravite”. Proximal to the detrital cores there are inner domains of asymmetric tourmaline overgrowths that developed during low grade metamorphism. Volumetrically dominant tourmaline overgrowths in the outer domain are concentrically zoned aluminous dravite and “oxy-dravite” with Al/(Al + Fe + Mg) = 0.71–0.74 and Mg/(Mg + Fe) = 0.64–0.71. Variability of Al is primarily controlled by the deprotonation substitution R + OH⁻ = Al + O²⁻ (where R = Fe + Mg), and is a function of the activity of H₂O. A likely evolutionary scenario is one in which volcanogenic material is altered by hydrothermal fluids in the sea floor resulting in an aluminous and magnesian residuum. With further hydrothermal circulation and incipient metamorphism, boron-rich fluids are expelled from metasedimentary and metavolcanic basement rocks and develop Mg-rich tourmalinites in the aluminous, magnesian host rocks. The tourmalinization process occurs over a range of metamorphic conditions and with fluids of variable activity of H₂O.     

Calcite dissolution kinetics in saline waters

The effect of ionic strength (I), pCO₂, and temperature on the dissolution rate of calcite was investigated in magnesium-free, phosphate-free, low calcium (m_Ca2+ ≈ 0.01 m) simple KCl and NaCl solutions over the undersaturation range of 0.4 ≤ Ω_calcite ≤ 0.8. First-order kinetics were found sufficient to describe the rate data where the rate constant (k) is dependent on the solution composition. Rates decreased with increasing I and were faster in KCl than NaCl solutions at the same I indicating that Na⁺ interacts more strongly with the calcite surface than K⁺ or that water is less available in NaCl solutions. Rates increased with increasing pCO₂ and temperature, and their influences diminished at high I. Arrhenius plots yielded a relatively high activation energy (E_a ≈ 20 ± 2 kJ mol^− 1) which indicated that dissolution was dominated by surface-controlled processes. The multiple regression model (MR) of Gledhill and Morse (2006a) was found to adequately describe the results at high I in NaCl solutions, but caution must be used when extrapolating to low I or pCO₂ values. These results are consistent with the hypothesis that the mole fraction of “free” solvent (X_{“free”H2O}) plays a significant role in the dissolution kinetics of calcite with a minimum value of  45–55% required for dissolution to proceed in undersaturated solutions at 25–55 °C and pCO₂ = 0.1–1 atm. This hypothesis has been incorporated into a modified version of the MR model of Gledhill and Morse (2006a) where X_{“free”H2O} has replaced I and the Ca²⁺ and Mg²⁺ terms have been dropped:

     

The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H₂SO₄, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L⁻¹, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe–oxyhydroxysulfates (Fe(III)–SO₄–H⁺ solutions) or Fe–oxyhydroxychlorides (Fe(III)–Cl–H⁺ solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to 6–7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)–SO₄–H⁺ solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)–Cl–H⁺ solutions.