Spatial variability in streambed hydraulic conductivity of contrasting stream morphologies: channel bend and straight channel

Streambed hydraulic conductivity is one of the main factors controlling variability in surface water‐groundwater interactions, but only few studies aim at quantifying its spatial and temporal variability in different stream morphologies. Streambed horizontal hydraulic conductivities (K_h) were therefore determined from in‐stream slug tests, vertical hydraulic conductivities (K_v) were calculated with in‐stream permeameter tests and hydraulic heads were measured to obtain vertical head gradients at eight transects, each comprising five test locations, in a groundwater‐dominated stream. Seasonal small‐scale measurements were taken in December 2011 and August 2012, both in a straight stream channel with homogeneous elevation and downstream of a channel meander with heterogeneous elevation. All streambed attributes showed large spatial variability. K_h values were the highest at the depositional inner bend of the stream, whereas high K_v values were observed at the erosional outer bend and near the middle of the channel. Calculated K_v values were related to the thickness of the organic streambed sediment layer and also showed higher temporal variability than K_h because of sedimentation and scouring processes affecting the upper layers of the streambed. Test locations at the channel bend showed a more heterogeneous distribution of streambed properties than test locations in the straight channel, whereas within the channel bend, higher spatial variability in streambed attributes was observed across the stream than along the stream channel. Copyright © 2014 John Wiley & Sons, Ltd.     

Anisotropy and depth‐related heterogeneity of hydraulic conductivity in a bog peat. I: laboratory measurements

Anisotropy and heterogeneity of hydraulic conductivity (K) are suspected of greatly affecting rates and patterns of ground‐water seepage in peats. A new laboratory method, termed here the modified cube method, was used to measure horizontal and vertical hydraulic conductivity (K_h and K_v) of 400 samples of bog peat. The new method avoids many of the problems associated with existing field and laboratory methods, and is shown to give relatively precise measurements of K. In the majority of samples tested, K_h was much greater than K_v, indicating that the bog peat was strongly anisotropic. Log₁₀K_h, log₁₀K_v, and log₁₀ (K_h/K_v) were found to vary significantly with depth, although none of the relationships was simple. We comment on the scale dependency of our measurements. Copyright © 2002 John Wiley & Sons, Ltd.     

Feasibility of grain-size analysis methods for determination of vertical hydraulic conductivity of streambeds

Accurate estimation of streambed vertical hydraulic conductivity (K_v) is of great importance in the analysis of water quantity exchange and solute transfer between a stream and its sediments. The paper analyzed the inaccuracy of hydraulic conductivity values of sediments derived from grain-size distribution (K_g), which were determined from eight empirical grain-size methods to represent streambed K_v. In this study, the values of K_v for a streambed were derived using falling-head standpipe permeameter tests conducted at eight study sites in the Elkhorn River, Nebraska, and the tested streambed columns were then collected for grain-size analysis by sieving. These empirical methods were used to calculate the K_g values of the streambed from grain-size distribution data of sediments. Unlike many other studies, this study verifies K_g from grain-size distribution with K_v from permeameter tests on the basis of the same samples of streambed sediments. The K_g values derived from the eight empirical methods were larger than the K_v from permeameter tests; there are five methods that give K_g values of about 3–6 times larger than these K_v. The K_g values from the Kozeny formula followed by the Hazen formula give the largest overestimation error if they are used to represent the K_v of the streambed. The USBR and Shepherd formulas generated K_g values close to K_v, but these K_g values are still larger in general than the K_v values. Moreover, the new values of coefficient C for the empirical formulas were revised so that they can be used to calculate the approximate K_v of a streambed. Among the eight methods, the ratios of the original C values to the average new C range from 1.3 to 5.9. It can be hypothesized that smaller C values must be used in the estimation of K_v for general soil samples if these empirical formulas are used to calculate K_v.     

First approximations of soil moisture retention curves using the filter‐paper method

Relationships between gravimetric soil moisture content (w) and matric potential (ϕ), and between volumetric soil moisture content (θ_v) and pressure head (h) were approximated for the unsaturated zone on Long Island, New York. Soil samples were collected from two sites using a hand auger. The soil moisture content was determined using the filter‐paper (w_f) and gravimetric (w) methods, respectively. The w_f was then used in an empirical equation to estimate ϕ_m. Each set of ϕ_m and w was combined with a straight‐line empirical model to obtain a w(ϕ_m) relationship. Soil ϕ_m was converted to h, and w to the volumetric moisture content θ_v, in order to produce a θ_v(h) curve. Graphical and statistical comparison showed that the resulting θ_v(h) curves fell within one order of magnitude of similar curves generated by a more sophisticated non‐linear model developed previously. The simplicity and low cost of the filter‐paper approach described in this study recommends it for preliminary studies of hydraulic properties in the unsaturated zone. Copyright © 2000 John Wiley & Sons, Ltd.     

Horizontal hydraulic conductivity of shallow streambed sediments and comparison with the grain‐size analysis results

Streambed horizontal hydraulic conductivity (K_h) has a substantial role in controlling exchanges between stream water and groundwater. We propose a new approach for determining K_h of the shallow streambed sediments. Undisturbed sediment samples were collected using tubes that were horizontally driven into streambeds. The sediment columns were analysed using a permeameter test (PT) on site. This new test approach minimizes uncertainties due to vertical flow in the vicinity of test tube and stream stage fluctuations in the computation of the K_h values. Ninety‐eight PTs using the new approach were conducted at eight sites in four tributaries of the Platte River, east‐central Nebraska, USA. The K_h values were compared with the nondirectional hydraulic conductivity values (K_g) determined from 12 empirical grain‐size analysis methods. The grain‐size analysis methods used the same sediment samples as K_h tests. Only two methods, the Terzaghi and Shepherd methods, yielded K_g values close to the K_h values. Although the Sauerbrei method produced a value relatively closer to K_h than other nine grain‐size analysis methods, the values from this method were not as reliable as the methods of Terzaghi and Shepherd due to the inconsistent fluctuation of the average estimates at each of the test sites. The Zunker, Zamarin, Hazen, Beyer, and Kozeny methods overestimated K_h, while the Slichter, US Bureau of Reclamation (USBR), Harleman, and Alyamani and Sen methods underestimated K_h. Any of these specific grain‐size methods might yield good estimates of streambed K_h at some sites, but give poor estimates at other sites, indicating that the relationship between K_g and K_h is significantly site dependent in our study. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamic characteristics of soil-foundation interaction system detected from forced vibration test and earthquake observation

This paper presents some results on the following subjects obtained from in-situ forced vibration tests and earthquake observations. (1) The characteristics of the radiation damping of soil-foundation interaction systems vs. non-dimensional frequency a₀ (=ωr/V_s) were experimentally estimated by the equivalent damping ratios h_H ( = K′_H/2K_H) and h_R ( = K′_R/2K_R), which were defined by complex stiffnesses 1K_H (= K_H + iK_H) and 1K_R (= K_R + iK′_R) of soil. The results for h_H and h_R of base rock were compared with those of soft soil. (2) A comparative study of experimental and theoretical results was made. The theoretical results were obtained from elastic half-space theory. (3) A semi-empirical equation to estimate the equivalent S-wave velocity for the elastic half-space model is proposed here, considering the effects of layered media. (4) Various comparisons of the results of 1 K_H, 1 K_R, h_H and h_R of forced vibration tests and earthquake observations were made.     

Transient streambed hydraulic conductivity in channel and bar environments,Loup River,Nebraska

Streambed hydraulic conductivity (K) and vertical K (K _v) are key controls on groundwater and surface water exchange and biogeochemical fluxes through the hyporheic zone, but drivers of transient hydraulic properties in different fluvial environments are poorly understood. This study combines hydrogeology, geophysics, and sedimentology to reveal mechanisms of K and K _v transience in the upper 0.5 m of a sandy streambed during low discharge. Hydraulic tests (44 slug tests, 130 falling-head permeameter tests) and 130 grain-size analyses were repeated three times over 8 weeks on a 1,200 m² grid spanning: (a) a channel with continuously flowing water and mobile bed load; (b) an adjacent mid-channel bar that was stationary and infrequently submerged. Aerial photographs and ground-penetrating radar show scour and complete reworking of fluvial sediments in the channel. Bar sediments below the water table remained immobile, but infrequent flows of moderate discharge reworked the uppermost few centimetres of the bar top. Despite differences in sediment mobility and stream flow characteristics across environments, K and K _v exhibited order-of-magnitude differences in spatial heterogeneity and temporal variability in both the channel and bar. Mean K and K _v values in the channel were comparatively stable over time. In the immobile bar, mean K declined 20% and K _v declined 26% after increased discharge temporarily inundated the bar. Grain-size distributions were steady across both environments over time, but repeat geophysical surveys of the bar show a decrease in electrical conductivity, likely from porosity reduction. These findings suggest that sediment dynamics and stream flow characteristics in different streambed environments are important drivers of K transience during low discharge conditions. Specifically, pore clogging can be an important mechanism of transience over short durations (weeks to months) in immobile sediments subject to infrequent flows and minor reworking.     

Geostatistical features of streambed vertical hydraulic conductivities in Frenchman Creek Watershed in Western Nebraska

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential and spherical variogram models were used with Kriging gridding method for the 10 sites. As a goodness-of-fit statistic for the variogram models, cross-validation results showed differences in the median absolute deviation and the standard deviation of the cross-validation residuals. Results show that using the geometric means of the 10 sites for gridding performs better than using either all the K_v values from the 93 permeameter tests or 10 K_v values from the middle transects and centre permeameters. Incorporating both the spatial variability and the uncertainty involved in the measurement at a reach segment can yield more accurate grid results that can be useful in calibrating K_v at watershed or sub-watershed scales in distributed hydrological models.     

A Joint Analytic Method for Estimating Aquitard Hydraulic Parameters

The vertical hydraulic conductivity (K_v), elastic (S_ske), and inelastic (S_skv) skeletal specific storage of aquitards are three of the most critical parameters in land subsidence investigations. Two new analytic methods are proposed to estimate the three parameters. The first analytic method is based on a new concept of delay time ratio for estimating K_v and S_ske of an aquitard subject to long‐term stable, cyclic hydraulic head changes at boundaries. The second analytic method estimates the S_skv of the aquitard subject to linearly declining hydraulic heads at boundaries. Both methods are based on analytical solutions for flow within the aquitard, and they are jointly employed to obtain the three parameter estimates. This joint analytic method is applied to estimate the K_v, S_ske, and S_skv of a 34.54‐m thick aquitard for which the deformation progress has been recorded by an extensometer located in Shanghai, China. The estimated results are then calibrated by PEST (Doherty 2005), a parameter estimation code coupled with a one‐dimensional aquitard‐drainage model. The K_v and S_ske estimated by the joint analytic method are quite close to those estimated via inverse modeling and performed much better in simulating elastic deformation than the estimates obtained from the stress‐strain diagram method of Ye and Xue (2005). The newly proposed joint analytic method is an effective tool that provides reasonable initial values for calibrating land subsidence models.     

Depth‐dependent hydraulic conductivity distribution patterns of a streambed

Characterization of streambed hydraulic conductivity from the channel surface to a great depth below the channel surface can provide needed information for the determination of stream‐aquifer hydrologic connectedness, and it is also important to river restoration. However, knowledge on the streambed hydraulic conductivity for sediments 1 m below the channel surface is scarce. This study describes a method that was used to determine the distribution patterns of streambed hydraulic conductivity for sediments from channel surface to a depth of 15 m below. The method includes Geoprobe's direct‐push techniques and Permeameter tests. Direct‐push techniques were used to generate the electrical conductivity (EC) logs and to collect sequences of continuous sediment cores from river channels, as well as from the alluvial aquifer connected to the river. Permeameter tests on these sediment cores give the profiles of vertical hydraulic conductivity (K_v) of the channel sediments and the aquifer materials. This method was applied to produce K_v profiles for a streambed and an alluvial aquifer in the Platte River Valley of Nebraska, USA. Comparison and statistical analysis of the K_v profiles from the river channel and from the proximate alluvial aquifer indicates a special pattern of K_v in the channel sediments. This depth‐dependent pattern of K_v distribution for the channel sediments is considered to be produced by hyporheic processes. This K_v‐distribution pattern implied that the effect of hyporheic processes on streambed hydraulic conductivity can reach the sediments about 9 m below the channel surface. Copyright © 2010 John Wiley & Sons, Ltd.     

Upward infiltration–evaporation method to estimate soil hydraulic properties

Determination of saturated hydraulic conductivity, K_s, and the van Genuchten water retention curve θ(h) parameters is crucial in evaluating unsaturated soil water flow. The aim of this work is to present a method to estimate K_s, α and n from numerical analysis of an upward infiltration process at saturation (Cap0), with (Cap0 + h) and without (Cap0) an overpressure step (h) at the end of the wetting phase, followed by an evaporation process (Evap). The HYDRUS model as well as a brute-force search method were used for theoretical loam soil parameter estimation. The uniqueness and the accuracy of solutions from the response surfaces, K_s–n, α–n and K_s–α, were evaluated for different scenarios. Numerical experiments showed that only the Cap0 + Evap and Cap0 + h + Evap scenarios were univocally able to estimate the hydraulic properties. The method gave reliable results in sand, loam and clay-loam soils.     

The effect of expansion ratio on the critical Reynolds number in single fracture flow with sudden expansion

Flow in a single fracture (SF) is an important research subject in groundwater hydrology, hydraulic engineering, radioactive nuclear waste repository and geotechnical engineering. An abruptly changing aperture is a unique type of SF. This study discusses the relation between the values of the critical Reynolds number (Re_c) for the onset of symmetry breaking of flow and the expansion ratio (E) of SF, which is defined as the ratio between the outlet (D) and inlet (d) apertures. This study also investigates the effect of inlet aperture d on Re_c for flow in an SF with abruptly changing apertures (SF‐ACA) using the finite volume method. Earlier numerical and experimental results showed that flow is symmetric in respect to the central plane of the SF‐ACA at small Reynolds number (Re) but becomes asymmetric when Re is sufficiently large. Our simulations show that the value of Re_c decreases with the increasing E, and the relationship between the logarithm of Re_c and E can be described accurately using either a quadratic polynomial function or a logarithmic function. However, the relationship of Re_c and d for a given E value is vague, and Re_c becomes even less sensitive to d when E increases. This study also reveals that the hydraulic gradient (J) and flow velocity (v) follow a super‐linear relationship that can be fitted almost perfectly by the Forchheimer equation. The inertial component (J_i) of J increases monotonically with Re, whereas the viscous component (J_v) of J decreases monotonically with Re. The Re value corresponding to equal inertial and viscous components of J (named as the transitional point Re) decreases when E increases, and such a transitional point Re should be closely related to the critical Reynolds number Re_c, although a rigorous theoretical proof is not yet available. Copyright © 2015 John Wiley & Sons, Ltd.     

An Integrated Laboratory Method to Measure and Verify Directional Hydraulic Conductivity in Fine‐to‐Medium Sandy Sediments

The constant‐head permeameter test (CHPT) is widely used in sandy samples as a standard method in the laboratory to investigate hydraulic conductivity (K). However, it neither can be used to consistently determine directional hydraulic conductivity (DHC) nor guarantee the comparability of measured K values of samples with different sizes. Therefore, this paper proposes an integrated laboratory method, called modified CHPT (MCHPT), for the efficient determination and verification of consistent DHC values in fine‐to‐medium sandy sediments, based on a new methodological framework. A precise and standardized procedure for preparing the experimental setup of MCHPT was conducted, based on the integrated experimental setup of CHPT and tracer tests. Moreover, a formula was yielded for the time‐optimized sample saturation control. In comparison with grain size‐based methods, the validity of consistent K_h and K_v values determined by MCHPT was convincing.     

Spatial and depth variability of streambed vertical hydraulic conductivity under the regional flow regimes

This study investigated the influence of the regional flow on the streambed vertical hydraulic conductivity (K_v) within the hyporheic zone in three stream reaches of the Weihe River in July 2016. The streambed K_v with two connected depths was investigated at each test reach. Based on the sediment characteristics, the three test reaches could be divided into three categories: a sandy streambed without continuous silt and clay layer, a sandy streambed with continuous silt and clay layer, and a silt–clay streambed. The results demonstrate that the streambed K_v mainly decreases with the depth at the sandy streambed (without continuous silt and clay layer) and increases with the depth at the other two test reaches. At the sandy streambed (with continuous silt and clay layer) where streambed K_v mainly decreases with the depth, the regional upward flux can suspend fine particles and enhance the pore spacing, resulting in the elevated K_v in the upper sediment layers. At another sandy streambed, the continuous silt and clay layer is the main factor that influences the vertical distribution of fine particles and streambed K_v. An increase in streambed K_v with the depth at the silt/clay streambed is attributed to the regional downward movement of water within the sediments that may lead to more fine particles deposited in the pores in the upper sediment layers. The streambed K_v is very close to the bank in the sandy streambed without continuous silt and clay layer and the channel centre in the other two test reaches. Differences in grain size distribution of the sediments at each test reach exercise a strong controlling influence on the streambed K_v. This study promotes the understanding of dynamics influencing the interactions between groundwater and surface water and provides guidelines to scientific water resources management for rivers.     

Estimating finite difference block equivalent hydraulic conductivity for numerically solving the Richards' equation

A method is proposed for calculating the equivalent hydraulic conductivity (EHC) within a finite difference block (FDB). Application of the constant‐flux assumption of Darcy's Law, the EHC equals to the integration of effective hydraulic conductivity (K_w) as a function of pressure head (h_w) divided by the head difference at the ends of the FDB. Error analysis show that the constant‐flux (CF) EHC estimates are better than those computed by the commonly used arithmetic‐mean (AM), geometric‐mean (GM), and harmonic‐mean (HM) techniques. CF EHC results are even more superior at larger interblock head difference situations. Simulations of water infiltration experiments show that simulations using the CF EHC or AM or GM weighting technique have only slight difference while applying the Neumann type boundary condition at the ground surface. In case of the Dirichlet type boundary condition, however, the CF EHC is superior to the other two in correctly estimating the depth of infiltration while enlarging the grid size. Therefore, it is recommended to adopt the CF EHC with a larger grid size to the more stable and more efficient results. Copyright © 2007 John Wiley & Sons, Ltd.     

Note on the scalar dynamo model

Abstract

Bayly (1993) introduced and investigated the equation (? _t + v·▽-η ▽²)S = RS as a scalar analogue of the magnetic induction equation. Here, S(r, t) is a scalar function and the flow field v(r, t) and “stretching” function R(r, t) are given independently. This equation is much easier to handle than the corresponding vector equation and, although not of much relevance to the (vector) kinematic dynamo problem, it helps to study some features of the fast dynamo problem. In this note the scalar equation is considered for linear flow and a harmonic potential as stretching function. The steady equation separates into one-dimensional equations, which can be completely solved and therefore allow one to monitor the behaviour of the spectrum in the limit of vanishing diffusivity. For more general homogeneous flows a scaling argument is given which ensures fast dynamo action for certain powers of the harmonic potential. Our results stress the singular behaviour of eigenfunctions in the limit of vanishing diffusivity and the importance of stagnation points in the flow for fast dynamo action.     

OUTBURST FLOODS FROM GLACIER-DAMMED LAKES: THE EFFECT OF MODE OF LAKE DRAINAGE ON FLOOD MAGNITUDE

Published accounts of outburst floods from glacier-dammed lakes show that a significant number of such floods are associated not with drainage through a tunnel incised into the basal ice—the process generally assumed—but rather with ice-marginal drainage, mechanical failure of part of the ice dam, or both. Non-tunnel floods are strongly correlated with formation of an ice dam by a glacier advancing from a tributary drainage into either a main river valley or a pre-existing body of water (lake or fiord). For a given lake volume, non-tunnel floods tend to have significantly higher peak discharges than tunnel-drainage floods. Statistical analysis of data for floods associated with subglacial tunnels yields the following empirical relation between lake volume V and peak discharge Q_p : Q_p = 46V^0.66 (r² = 0.70), when Q_p is expressed in metres per second and V in millions of cubic metres. This updates the so-called Clague–Mathews relation. For non-tunnel floods, the analogous relation is Q_p = 1100V^0.44 (r² = 0.58). The latter relation is close to one found by Costa (1988) for failure of constructed earthen dams. This closeness is probably not coincidental but rather reflects similarities in modes of dam failure and lake drainage. We develop a simple physical model of the breach-widening process for non-tunnel floods, assuming that (1) the rate of breach widening is controlled by melting of the ice, (2) outflow from the lake is regulated by the hydraulic condition of critical flow where water enters the breach, and (3) the effect of lake temperature may be dealt with as done by Clarke (1982). Calculations based on the model simulate quite well outbursts from Lake George, Alaska. Dimensional analysis leads to two approximations of the form Q_p ∝ V^qf(h_i, θ₀), where q = 0.5 to 0.6, h_i is initial lake depth, θ₀ is lake temperature, and the form of f (h_i, θ₀) depends on the relative importance of viscous dissipation and the lake's thermal energy in determining the rate of breach opening. These expressions, along with the regression relations, should prove useful for assessing the probable magnitude of breach-type outburst floods.     

Investigating peat hydrological properties using field and laboratory methods: application to the Lanoraie peatland complex (southern Quebec,Canada)

Flow dynamics within a peatland are governed by hydraulic parameters such as hydraulic conductivity, dispersivity and specific yield, as well as by anisotropy and heterogeneity. The aim of this study is to investigate hydraulic parameters variability in peat through the use of different field and laboratory methods. An experimental site located in the Lanoraie peatland complex (southern Quebec, Canada) was used to test the different approaches. Slug and bail tests were performed in piezometer standpipes to investigate catotelm hydraulic conductivity. Combined Darcy tests and tracer experiments were conducted on cubic samples using the modified cube method (MCM) to assess catotelm hydraulic conductivity, anisotropy and dispersivity. A new laboratory method is proposed for assessing acrotelm hydraulic conductivity and gravity drainage using a laboratory experimental tank. Most of slug tests' recovery curves were characteristic of compressible media, and important variability was observed depending on the initial head difference. The Darcy experiments on cubic samples provided reproducible results, and anisotropy (K_h > K_v) was observed for most of samples. All tracer experiments displayed asymmetrical breakthrough curves, suggesting the presence of retardation and/or dual porosity. Hydraulic conductivity estimates performed using the experimental tank showed K variations over a factor of 44 within the upper 40 cm of the acrotelm. The results demonstrate that the intrinsic variability associated with the different field and laboratory methods is small compared with the spatial variability of hydraulic parameters. It is suggested that a comprehensive assessment of peat hydrological properties can be obtained through the combined use of complementary field and laboratory investigations. Copyright © 2007 John Wiley & Sons, Ltd.     

Analysis of the nonlinear storage–discharge relation for hillslopes through 2D numerical modelling

Storage–discharge curves are widely used in several hydrological applications concerning flow and solute transport in small catchments. This article analyzes the relation Q(S) (where Q is the discharge and S is the saturated storage in the hillslope), as a function of some simple structural parameters. The relation Q(S) is evaluated through two‐dimensional numerical simulations and makes use of dimensionless quantities. The method lies in between simple analytical approaches, like those based on the Boussinesq formulation, and more complex distributed models. After the numerical solution of the dimensionless Richards equation, simple analytical relations for Q(S) are determined in dimensionless form, as a function of a few relevant physical parameters. It was found that the storage–discharge curve can be well approximated by a power law function Q/(LK_s) = a(S/(L²(? ? θ_r)))^b, where L is the length of the hillslope, K_s the saturated conductivity, ? ? θ_r the effective porosity, and a, b two coefficients which mainly depend on the slope. The results confirm the validity of the widely used power law assumption for Q(S). Similar relations can be obtained by performing a standard recession curve analysis. Although simplified, the results obtained in the present work may serve as a preliminary tool for assessing the storage–discharge relation in hillslopes. Copyright © 2012 John Wiley & Sons, Ltd.     

Pan evaporation modelling and changing attribution analysis on the Tibetan Plateau (1970–2012)

Pan evaporation (E_p) is an important indicator of water and energy and the decline of E_p has been reported in many regions over the last decades. The climate and E_p are dependent on each other. In this study, the temporal trends of E_p and main E_p drivers, namely mean air temperature (T_a), wind speed (u), global solar radiation (R_s), net long‐wave radiation(R_nl) and vapour pressure deficit (D) from 1970 to 2012, were calculated on the basis of 26 meteorological stations on the Tibetan Plateau. The arithmetic average of E_p from 26 stations decreased with the rate of ?11.91 mm a^?2; the trends of R_s, R_nl, T_a, u and D were ?1.434 w m^?2 decade^?1, 0.2511 w m^?2 decade^?1, 0.3590°C decade^?1, ?0.2376 m s^?1 decade^?1 and 9.523 Pa decade^?1, respectively. The diffuse irradiance is an essential parameter to model E_p and quantify the contribution of climatic factors to changing E_p. 60 724 observations of R_s and diffuse solar irradiance (R_d) from seven of the 26 stations were used to develop the correlation between the diffuse fraction (R_d/R_s), and the clearness index (R_s/R_o). On the basis of the estimation of the diffuse component of R_s and climatic data, we modified the PenPan model to estimate Chinese micro‐pan evaporation (E_p) and assess the attribution of E_p dynamics using partial derivatives. The results showed that there was a good agreement between the observed and calculated daily E_p values. The observed decrease in E_p was mostly due to declining wind speed (?13.7 mm a^?2) with some contributions from decreasing solar irradiance (?3.1 mm a^?2); and the increase of temperature had a large positive effect (4.55 mm a^?2) in total whilst the increase of R_nl had insignificant effect (0.35 mm a^?2) on E_p rates. The change of E_p is the net result of all the climatic variables. Copyright © 2014 John Wiley & Sons, Ltd.