Relating aerial erosion,soil erosion and sub‐soil erosion to the evolution of Lunan Stone Forest,China

Stone forest (‘Shilin’ in Chinese) is a unique karst landform with a complex evolution process. Based mainly on the characteristics and interrelationships of sub‐soil, soil and sub‐aerial erosion in Lunan karst area, the authors develop a triplex erosion model to describe the evolution of stone forest, and apply it to examine the current development stage and the prospect of the Lunan Stone Forest. The study shows that sub‐soil corrosion, a basic driving force for the vertical scope of a stone forest, usually occurs within 10 m below ground surface but is observed to be most active within the top 2 m, which constitutes the best development zone for stone forest. Under modern climatic conditions, the tip of the stone pillars in Lunan karst area is lowering at a rate of 10·4 mm ka^?1, whereas the base of the stone pillars is deepening at 26·17 mm ka^?1. Therefore, the height of stone pillars is increasing at a rate of 15·77 mm ka^?1. Considering that soil erosion in the study area is as high as 650 mm ka^?1, the visible height of the stone forest is actually increasing at a rate of 639·6 mm ka^?1. However, the best evolution time for Lunan Stone Forest has already passed despite the fact that it is still growing taller at the present time. This is because the soil layer, which plays an extremely significant role in the heightening of stone pillars, is rapidly thinning at a rate of 623·83 mm ka^?1. Copyright © 2006 John Wiley & Sons, Ltd.     

The application of caesium‐137 measurements to investigate floodplain deposition in a large semi‐arid catchment in Queensland,Australia: a low‐fallout environment

Floodplains comprise geomorphologically important sources and sinks for sediments and associated pollutants, yet the sedimentology of large dryland floodplains is not well understood. Processes occurring on such floodplains are often difficult to observe, and techniques used to investigate smaller perennial floodplains are often not practical in these environments. This study assesses the utility of ¹³⁷Cs inventory and depth‐profile techniques for determining relative amounts of floodplain sedimentation in the Fitzroy River, northeastern Australia; a 143 000 km² semi‐arid river system. Caesium‐137 inventories were calculated for floodplain and reference location bulk soil cores collected from four sites. Depth profiles of ¹³⁷Cs concentration from each floodplain site and a reference location were recorded. The areal density of ¹³⁷Cs at reference locations ranged from 13 to 978 Bq m^–2 (0–1367 Bq m^–2 at the 95% confidence interval), and the mean value ± 2 (standard error of the mean) was 436 ± 264 Bq m^–2, similar to published data from other Southern Hemisphere locations. Floodplain inventories ranged from 68 to 1142 Bq m^–2 (0–1692 Bq m^–2 at the 95% confidence interval), essentially falling within the range of reference inventory values, thus preventing calculation of erosion or deposition. Depth‐profiles of ¹³⁷Cs concentration indicate erosion at one site and over 66 cm of deposition at another since 1954. Analysis of ^239+240Pu concentrations in a depositional core substantiated the interpretation made from ¹³⁷Cs data, and depict a more tightly constrained peak in concentration. Average annual deposition rates range from 0 to 15 mm. The similarity between floodplain and reference bulk inventories does not necessarily indicate a lack of erosion or deposition, due to low ¹³⁷Cs fallout in the region and associated high measurement uncertainties, and a likely influence of gully and bank eroded sediments with no or limited adsorbed ¹³⁷Cs. In this low‐fallout environment, detailed depth‐profile data are necessary for investigating sedimentation using ¹³⁷Cs. Copyright © 2009 John Wiley & Sons, Ltd.     

Impacts of headcut height on flow energy,sediment yield and surface landform during bank gully erosion processes in the Yuanmou Dry‐hot Valley region,southwest China

To quantify the changes in flow energy, sediment yield and surface landform impacted by headcut height during bank gully erosion, five experimental platforms were constructed with different headcut heights ranging from 25 to 125 cm within an in situ active bank gully head. A series of scouring experiments were conducted under concentrated flow and the changes in flow energy, sediment yield and surface landform were observed. The results showed that great energy consumption occurred at gully head compared to the upstream area and gully bed. The flow energy consumption at gully heads and their contribution rates increased significantly with headcut height. Gully headcuts also contributed more sediment yield than the upstream area. The mean sediment concentrations at the outlet of plots were 2.3 to 7.3 times greater than those at the end of upstream area. Soil loss volume at gully heads and their contribution rates also increased with headcut height significantly. Furthermore, as headcut height increased, the retreat distance of gully heads increased, which was 1.7 to 8.9 times and 1.1 to 3.2 times greater than the incision depth of upstream area and gully beds. Positive correlations were found between energy consumption and soil loss, indicating that energy consumption could be used to estimate soil loss of headcut erosion. Headcut height had a significant impact on flow energy consumption, and thus influenced the changes in sediment yield and landform during the process of gully headcut erosion. Headcut height was one of the important factors for gully erosion control in this region. Further studies are needed to identify the role of headcut height under a wide condition. Copyright © 2018 John Wiley & Sons, Ltd.     

GIS‐based modelling of soil erosion processes using the modified‐MMF (MMMF) model in a large watershed having vast agro‐climatological differences

The present study demonstrates a spatially distributed application of a field‐scale annual soil loss model, the modified‐MMF (MMMF), to a large watershed using hydrological routing techniques, remote sensing data and geospatial technologies. In this study, the MMMF model is implemented after incorporating the corrections suggested in recent literature along with appropriate modifications of the model to suit the agro‐climatological conditions prevailing in most parts of India. Sensitivity analysis carried out through an Average Linear Sensitivity approach indicates that the model outputs are highly sensitive to soil moisture (MS), bulk density (BD), effective hydraulic depth (EHD), ground cover (GC) and settling velocity for clay (VS_c). During calibration and validation, the performance evaluation statistics are mostly in the range of very good to satisfactory for both runoff and soil loss at the watershed outlet. Even spatial validation of the results of intermediate processes in the water phase and the sediment phase, although qualitative, seems to be reasonable and rational. Furthermore, the soil erosion severity analysis for different land‐uses existing in the watershed indicates that about 90% of the watershed area, especially that occupied by agricultural lands, is vulnerable to the long‐term effects of soil erosion. Copyright © 2018 John Wiley & Sons, Ltd.     

The responses of hydrological processes and sediment yield to land‐use and climate change in the Be River Catchment,Vietnam

In this study, we investigated the responses of hydrology and sediment yield with impacts of land‐use and climate change scenarios in the Be River Catchment, using the Soil and Water Assessment Tool (SWAT) hydrological model. The calibration and validation results indicated that the SWAT model is a powerful tool for simulating the impact of environmental change on hydrology and sediment yield in this catchment. The hydrologic and sediment yield responses to land‐use and climate changes were simulated based on the calibrated model. The results indicated that a 16.3% decrease in forest land is likely to increase streamflow (0.2 to 0.4%), sediment load (1.8 to 3.0%), and surface runoff (SURQ) (4.8 to 10.7%) and to decrease groundwater discharge (GW_Q) (3.5 to 7.9%). Climate change in the catchment leads to decreases in streamflow (0.7 to 6.9%) and GW_Q (3.0 to 8.4%), increase in evapotranspiration (0.5 to 2.9%), and changes in SURQ (?5.3 to 2.3%) and sediment load (?5.3 to 4.4%). The combined impacts of land‐use and climate changes decrease streamflow (2.0 to 3.9%) and GW_Q (12.3 to 14.0%), increase evapotranspiration (0.7 to 2.8%), SURQ (8.2 to 12.4%), and sediment load (2.0 to 7.9%). In general, the separate impacts of climate and land‐use changes on streamflow, sediment load, and water balance components are offset each other. However, SURQ and some component of subsurface flow are more sensitive to land‐use change than to climate change. Furthermore, the results emphasized water scarcity during the dry season and increased soil erosion during the wet season. Copyright © 2012 John Wiley & Sons, Ltd.