榆木山北缘断裂古地震特征研究

榆木山北缘断裂位于祁连山主体山系以北的榆木山北部边缘.断裂活动形成一系列沿山前发育的断层陡坎.通过探槽剖面对发生在该断裂带上的古地震事件进行了分析,大致可以确定全新世以来的2次古地震事件.事件Ⅰ的年代为距今(4.066±0.086)ka;事件Ⅱ为距今(6.852±0.102)ka至(6.107±0.082)ka之间.该...     

HORIZONTAL MOVEMENT CHARACTERISTICS OF THE ACTIVE SANWEISHAN FAULT AND ITS MECHANISM: CONSTRAINTS ON THE GROWTH OF THE NORTHERN QINGHAI-TIBETAN PLATEAU

The northern margin of the Qinghai-Tibet Plateau is currently the leading edge of uplift and expansion of the plateau. Over the years, a lot of research has been carried out on the deformation and evolution of the northeastern margin of the Qinghai-Tibet Plateau, and many ideas have been put forward, but there are also many disputes. The Altyn Tagh Fault constitutes the northern boundary of the Qinghai-Tibet Plateau, and there are two active faults on the north side of the Altyn Tagh Fault, named Sanweishan Fault with NEE strike and Nanjieshan Fault with EW strike. Especially, studies on the geometric and kinematic parameters of Sanweishan Fault since the Late Quaternary, which is nearly parallel with the Altyn Tagn Fault, are of great significance for understanding the deformation transfer and distribution in the northwestward extension of the Qinghai-Tibet Plateau. Therefore, interpretation of the fault landforms and statistical analysis of the horizontal displacement on the Sanweishan Fault and its newly discovered western extension are carried out in this paper. We believe that the Sanweishan Fault is an important branch of the eastern section of the Altyn Tagh fault zone. It is located at the front edge of the northwestern Qinghai-Tibet Plateau and is a left-lateral strike-slip and thrust active fault. Based on the interpretation of satellite imagery and microgeomorphology field investigation of Sanweishan main fault and its western segments, it's been found that the Sanweishan main fault constitutes the contact boundary between the Sanweishan Mountain and the alluvial fans. In the bedrock interior and on the north side of the Mogao Grottoes, there are also some branch faults distributed nearly parallel to the main fault. The main fault is about 150km long, striking 65°, mainly dipping SE with dip angles from 50° to 70°. The main fault can be divided into three segments in the spatial geometric distribution:the western segment(Xizhuigou-Dongshuigou, I), which is about 35km long, the middle segment(Dongshuigou-Shigongkouzi, Ⅱ), about 65km long, and the east segment(Shigongkouzi-Shuangta, Ⅲ), about 50km long. The above three segments are arranged in the left or right stepovers. In the west of Mingshashan, it's been found that the fault scarps are distributed near Danghe Reservoir and Yangguan Town in the west of Minshashan Mountain, and we thought those scarps are the westward extension of the main Sanweishan Fault. Along the main fault and its western extension, the different levels of water system(including gullies and rills)and ridges have been offset synchronously, forming a series of fault micro-geomorphology. The scale of the offset water system is proportional to the horizontal displacement. The frequency statistical analysis of the horizontal displacement shows that the displacement has obvious grouping characteristics, which are divided into 6 groups, and the corresponding peaks are 3.4m, 6.7m, 11.4m, 15m, 22m and 26m, respectively. Among them, 3.4m represents the coseismic displacement of the latest ancient earthquake event, and the larger displacement peak represents the accumulation of coseismic displacements of multi-paleoearthquake events. This kind of displacement characterized by approximately equal interval increase indicates that the Sanweishan Fault has experienced multiple characteristic earthquakes since the Late Quaternary and has the possibility of occurrence of earthquakes greater than magnitude 7. The distribution of displacement and structural transformation of the end of the fault indicate that Sanweishan Fault is an "Altyn Tagh Fault"in its infancy. The activities of Sanweishan Fault and its accompanying mountain uplift are the result of the transpression of the northern margin of the Qinghai-Tibet Plateau, representing one of the growth patterns of the northern margin of the plateau.     

ACTIVE CHARACTERISTICS OF THE SANWEISHAN FAULT IN THE NORTHERN MARGIN OF THE TIBETAN PLATEAU DURING LATE PLEISTOCENE

The Sanweishan fault is located in the northern margin of the Tibetan plateau. It is a branch of the Altyn Tagh fault zone which extends to the northwest. A detailed study on Late Quaternary activity characteristics of the Sanwei Shan Fault can help understanding the strain distribution of the Altyn Tagh fault zone and regional seismic activity and northward growth of the Tibetan plateau. Previous research on this fault is insufficient and its activity is a controversial issue. Based on satellite images interpretation, field investigations and geological mapping, this study attempts to characterize this feature, especially its activity during Late Quaternary. Trench excavation and sample dating permit to address this issue, including determination of paleoseismic events along this fault. The results show that the Sanweishan fault is a large-scale active structure. It starts from the Shuangta reservoir in the east, extending southward by Shigongkouzi, Lucaogou, and Shugouzi, terminates south of Xishuigou, with a length of 175km. The fault trends in NEE, dipping SE at angles 50°~70°. It is characterized by left-lateral strike-slip with a component of thrust and local normal faulting. According to the geometry, the fault can be divided into three segments, i.e. Shuangta-Shigongkouzi, Shigongkouzi-Shugouzi and Shugouzi-Xishuigou from east to west, looking like a left-or right-step pattern. Plenty of offset fault landforms appear along the Sanweishan Fault, including ridges, left-lateral strike-slip gullies, fault scarps, and fault grooves. The trench study at the middle and eastern segments of the fault shows its activity during Late Pleistocene, evidenced by displaced strata of this epoch. Identification marks of the paleoearthquakes and sample dating reveal one paleoearthquake that occurred at(40.3±5.2)~(42.1±3.9) ka.     

HOLOCENE ACTIVE CHARACTERISTICS OF THE NORTHERN SEGMENT OF THE MINJIANG FAULT IN THE EASTERN MARGIN OF THE TIBETAN PLATEAU

As a part of the north-south seismic zone in China, a lot of M6.0-7.2 earthquakes have occurred in the margin faults of the Minshan block in history. This work attempted to characterize the geometry and activity of the north section of the Minjiang fault in this region based on high-resolution satellite images, geologic and geomorphic investigations, micro-geomorphic surveys, and trench excavation. The results show left-lateral-slip and Holocene activity of this structure. Along it, the offset landform has a continuous linearity on Ⅱ terraces near the Chuanpan village. The vertical height of the fault scarp measures 3.1 meters, which is almost the same as the accumulative horizontal displacement of the gully. The accumulative horizontal shortening due to faulting is 3.0 meters. Calculation using the model of displacement-dependent characteristic earthquakes shows both the vertical and horizontal co-seismic displacements and the horizontal shortening amount are about 1.0 meter. While strata dating suggests that the vertical and horizontal slip rates are all about 0.7-0.9mm/a, and the horizontal shortening rate is approximately 1.0-1.1mm/a. The excavated trench, perpendicular to the fault trace, reveals low-angle thrust dipping in 260åt 29°. From the relationship of the fault, colluvial wedge and stratigraphy ages, three palaeoseismic events are identified from youngest to oldest at 0-295a BP, 1 405-1 565a BP, and 2 750-2 875a BP, respectively, with recurrence intervals 1 110-1 565 years and elapsed time about 0-295 years。According to the relationship between magnitude and active parameters, it is considered that the northern segment of the Minjiang fault is capable of generating M7 or greater earthquakes. Now it is in the process of stress accumulation, having a certain seismic risk.     

青藏高原及周边现今构造变形的运动学

青藏高原现今构造变形的定量化研究是理解其动力过程的基础 ,近年来高速发展的GPS(全球定位系统 )技术为测量大尺度现今构造变形提供了最有效的手段。我们利用青藏高原及周边的5 5 3个GPS观测数据给出了其现今构造变形的速度场 ,表明印度和欧亚板块之间的相对运动主要被青藏高原周边的地壳缩短和内部的走滑剪切所调整吸收。其中 ,喜马拉雅山系吸收了青藏高原总缩短量的 4 4%～ 5 3% ,北部的阿尔金山、祁连山和柴达木盆地吸收了 1 5 %～ 1 7% ,高原内部吸收了 32 %～4 1 %。青藏高原的“向东挤出”实际上是地壳物质的向东流动而不是刚性地块的挤出。这一地壳物质流动带在高原西部以地表张性正断层和共轭剪切走滑断层为特征 ,到高原中东部转换为巨型的弧形走滑断裂带 ,再到高原东北缘转换为地壳缩短和绕东喜马拉雅构造结的顺时针旋转。青藏高原的大尺度现今构造变形以连续变形为特     

西秦岭北缘-拉脊山两侧地貌差异及地貌演化

为了解西秦岭北缘-拉脊山两侧的地貌差异及其发育机制,利用DEM数据结合地质数据,提取局部地形起伏并绘制高程带状剖面图,定量化揭示了西秦岭北缘-拉脊山东西两侧地貌结构;在此基础上,统计了两侧新生代不同时期地层砂岩的高程像元众数,并进行了对比分析;通过对已知地质资料的提取和归纳,对比了西秦岭北缘-拉脊山断裂两侧新生代盆地地层岩性及沉积相.结果表明,界限以东新生代地层呈现地层年代越老高程越高的趋势;界限以西则呈现古近纪至新近纪地层越新高程越高、第四纪地层高程最低的特征.这种地层发育规律体现了西秦岭北缘-拉脊山两侧的地貌演化过程存在差异,即东侧水系发育时间早于西侧,地貌接受侵蚀的时间较长.同时,也从侧面反映了东、西两侧构造活动强度与时间的不一致性,古近纪以来东侧构造演化具有自SW向NE逐渐扩展的趋势;而西侧构造演化更为复杂,体现在新生代以来不同断裂带隆升历史的不一致性以及在较强的挤压应力及较弱剥蚀共同作用下的增生过程.     

牛首山-罗山断裂带的变形特征及其构造意义

牛首山-罗山断裂带是青藏高原东北缘最外侧的一条断裂带,其空间分布、深部结构、运动学特征以及变形机制对研究青藏高原东北角弧形断裂系的形成与演化具有重要意义。文中通过对横穿牛首山-罗山的4条地震反射剖面的解释及断裂带部分地区大比例尺的构造地质填图,发现牛首山-罗山断裂带具有不连续性与分段性。断裂带南段罗山断裂以正花状构造为特征,显示断裂具有右旋走滑性质;中段牛首山东麓断裂可能并不存在,该区以强烈的褶皱变形为特征;北段三关口断裂则以左旋走滑为特征。牛首山-罗山断裂带的这种不连续性和分段性反映了断裂带的不同构造部位在青藏高原向NE方向扩展过程中具有不同的变形样式。     

HOLOCENE SLIP RATE ALONG THE NE-TRENDING QIXIANG CO FAULT IN THE CENTRAL TIBETAN PLATEAU AND ITS TECTONIC IMPLICATIONS

The two mainstream deformation models of the Tibet plateau are continental escape model and crustal thickening model, the former suggests that the NW-trending Karakoram Fault, Gyaring Co Fault, Beng Co Fault and the Jiali Fault as the Karakoram-Jiali fault zone is the southern border belt and that the dextral strike-slip rate is estimated as up to 10~20mm/yr. However, research results in recent years show that the slip rates along those faults are significantly less than earlier estimates. Taylor et al. (2003)suggest that the conjugate strike-slip faults control the active deformation in the central Tibet. The lack of research on the slip behavior of the NE-trending faults in the central Tibet Plateau constrains our understanding of the central Tibet deformation model. Thus, we choose the NE-direction Qixiang Co Fault located at the north of the Gyaring Co Fault as research object. Based on the interpretation of satellite images, we found several faulted geomorphic sites. Using RTK-GPS ground control point and unmanned aerial vehicle (UAV)topographic surveying, we obtained less than 10cm/pix-resolution digital elevation model (DEM)in the Yaqu town site. We used the LaDiCaoz_v2.1 software to automatically extract the left-lateral offset of the largest gully on the terrace T₂ surface, which is (21.3±7.1)m, and the vertical dislocation of the scarp on the terrace T₂ surface, which is (0.9±0.1)m. The age of both U-series dating samples on the terrace T₂ is (4.98±0.17)ka and (5.98±0.07)ka, respectively. The Holocene left-lateral slip rate along Qixiang Co Fault is (3.56±1.19)mm/a and the vertical slip rate is (0.15±0.02)mm/a. The kinematic characteristics of the sinistral strike-slip with normal slip coincide with the eastward motion of the central Tibet plateau, and its magnitude is in agreement with its conjugate Gyaring Co Fault, suggesting that the deformation pattern of the central Tibetan plateau complies with the conjugate strike-slip faults mode.     

LATE QUATERNARY SINISTRAL STRIKE-SLIP ACTIVITIES OF SANWEI SHAN FAULT IN THE NORTH OF TIBETAN PLATEAU

Sanwei Shan Fault is located in the north of Tibet, which is a branch of eastern segment of Altyn Tagn fault zone. This fault is distributed along the boundary of fault facet and the Quaternary, with the total length of almost 150km. The fault is a straight-line structure read from the satellite image. Based on the spatial distribution of the fault, three segments are divided, namely, Xishuigou-Dongshuigou segment, Dongshuigou-West Shigongkouzi segment and West Shigongkouzi-Suangta segment, these three segments are distributed by left or right step.Though field microgeomorphology investigation along Sanwei Shan Fault, it has been found that two periods of alluvial-pluvial fans are distributed in front of Sanwei Shan Mountain, most of which are overstepped. Comparing the distribution of alluvial-pluvial fans with their formation age in the surrounding regions, and meanwhile, taking the results of optical stimulated luminescence(OSL) dating, it's considered that the formation age of the older alluvial-pluvial fans, which are distributed in northern Qilian Shan, inside of Hexi Corridor and western Hexi Corridor(including the Sanwei Shan piedmont fans), is between later period of late Quaternary and earlier period of Holocene. The gullies on the older fan and ridges have been cut synchronously. The maximum and minimum sinistral displacement is 5.5m and 1.7m, but majority of the values is between 3.0~4.5m. Taking the results from the OSL dating, we conclude that the minimum sinistral strike-slip rate is(0.33±0.04) mm/a since 14 ka BP and(0.28±0.03) mm/a since 20 ka BP.     

GEOLOGICAL AND GEOMORPHIC EVIDENCE FOR DEXTRAL STRIKE SLIP OF THE HELAN SHAN WEST-PIEDMONT FAULT AND ITS TECTONIC IMPLICATIONS

The horizontal movement of the Helan Shan west-piedmont fault is important to determination of the present-day boundary between the Alashan and North China blocks as well as to the exploration of the extent of the northeastward expansion of the Tibetan plateau. Field geological surveys found that this fault cuts the west wing of the Neogene anticline, which right-laterally offset the geological boundary between Ganhegou and Qingshuiying Formations with displacement over 800m. The secondary tensional joints (fissures)intersected with the main faults developed on the Quaternary flood high platform near the fault, of which the acute angles indicate its dextral strike slip. The normal faults developed at the southern end of the Helan Shan west-piedmont fault show that the west wall of this fault moves northward, and the tensional adjustment zone formed at the end of the strike slip fault, which reflects that the horizontal movement of the main fault is dextral strike slip. The dextral dislocation occurred in the gully across the fault during different periods. Therefore, the Helan Shan west-piedmont fault is a dextral strike slip fault rather than a sinistral strike slip fault as previous work suggested. The relationship between the faulting and deformation of Cenozoic strata demonstrates that there were two stages of tectonic deformation near the Helan Shan west-piedmont fault since the late Cenozoic, namely early folding and late faulting. These two tectonic deformations are the result of the northeastward thrust on the Alashan block by the Tibet Plateau. The influence range of Tibetan plateau expansion has arrived in the Helan Shan west-piedmont area in the late Pliocene leading to the dextral strike slip of this fault as well as formation of the current boundary between the Alashan and North China blocks, which is also the youngest front of the Tibetan plateau.     

青藏高原东部岩石圈电性结构特征及其构造意义

主要介绍青藏高原东部下察隅—清水河(EHS3D-3)剖面的大地电磁(MT)探测结果。根据2007年沿该测线观测的MT数据,经过资料处理、分析和二维反演,得到了研究区岩石圈的电性结构。结果表明:沿剖面电阻率分布具有纵向成层,横向分区的特征;上地壳由不同大小的高阻体构成;拉萨地块和羌塘地体中下地壳分别存在一个大范围的低阻体,初步认为这2个低阻体由深部流体以及部分熔融所致,可能是高原东部环绕东构造结的2个物质流通道,同时也是高原南北两侧的2个主要剪切走滑带;雅鲁藏布缝合带和班公-怒江缝合带均表现为向北逐渐加深的相对低阻带,可能是俯冲板片表面低阻物质的反映;金沙江断裂深部表现为强烈的低阻体异常,但与该区其它缝合带的电性特征区别较大。     

PRELIMINARY APPLICATION OF FOCAL MECHANISM SOLUTIONS OF SMALL AND MEDIUM-SIZE EARTHQUAKES TO FAULT STABILITY ANALYSIS IN THE SOUTHEASTERN TIBETAN PLATEAU

Analysis of stress state of faults is helpful to understand crustal mechanical properties and seismicity. In the paper, we invert the horizontal crustal stress field in the southeastern Tibetan plateau using focal mechanism solutions of small and medium-size earthquakes, and apply them to estimate the stability of regional major faults. Firstly, we collect focal mechanism solutions of small and medium-sized earthquakes in the southeastern Tibetan plateau. The dataset includes more than 1 000 focal mechanism solutions in the past twenty years. Magnitudes of these earthquakes vary from M3.0 to M6.0. Most of the focal mechanism solutions were determined using waveform inversion technique. Although most of focal mechanism solutions in the southeastern Tibetan plateau are strike-slip faulting, their spatial pattern is different in sub-regions. Normal faulting earthquakes mainly occurred in the western Sichuan region, reverse faulting earthquakes mainly occurred in the boundary zone between the Tibetan plateau and the South China craton, and strike-slip faulting earthquakes mainly occurred in the central and southern Yunnan region. Next, we settle on a mesh with grid spacing of 0.5° in longitude and latitude in the region and invert the horizontal crustal stress field at each grid point. Spatial variation of the maximum principal stress axis in the southeastern Tibetan plateau shows a clockwise rotation around the eastern Himalaya syntax. The azimuth of maximum compressional stress axis is about 88.1° in the western Sichuan region, about 124.6° in the South China craton, and about 21.6° in the western and southern Yunnan region. The azimuth of regional maximum compressional stress is nearly parallel to the direction of terrain elevation gradient, and that of the minimum compressional stress is nearly parallel to the tangential direction of the topographic elevation contours. The spatial pattern reflects the control role of gravity spreading of the Tibetan plateau on the regional horizontal stress field. Finally, we analyzed regional fault stability based on these collected focal mechanism solutions. The fault instability parameter (I) is defined based on the Mohr-Coulomb criterion and indicates the degree of fault approximating to rupture. The instability parameters on fourteen major faults in the southeastern Tibetan plateau were calculated. Our results show that the stability of the Lianfeng-Zhaotong Fault is the lowest before 2014 in the region, which indicates the fault zone is close to rupture at that time. Our results provide a new useful tool to assess regional seismic potential using dense focal mechanism solutions.     

活动断裂带的整体地震复发行为及其与分段地震复发行为的关系

利用中国大陆11条活动断裂带的地震资料,研究了板内活动断裂带整体的地震复发行为及其与单段的地震复发行为的关系．结果表明：由多个段落组成的活动断裂带的整体地震复发表现出成丛、完全随机和差的准周期3种行为,但以稀疏成丛行为为主,不同程度地表现出活跃期与平静期的交替;丛与丛之间以及丛内地震的时间间隔、丛的持续时间、地震次数和强度均是可变的;地震复发过程是非线性的,不存在强度 时间、时间 强度的相依性．然而,单个断裂段的地震复发过程要简单得多,并主要表现出准周期和时间可预报行为．本文还进一步揭示：断裂带整体地震复发过程中的丛主要是由不同断裂段在较短时期内的破裂传染作用造成的;沿断裂带破裂传染作用的程度、方向性可因不同轮回而变化,且传染似可跳过断裂带上不破裂的空区．     

NEW DISCOVERY OF RESHUI-TAOSTUO RIVER FAULT IN DULAN,QINGHAI PROVINCE AND ITS IMPLICATIONS

The 40km-long, NEE trending Reshui-Taostuo River Fault was found in the southern Dulan-Chaka highland by recent field investigation, which is a strike-slip fault with some normal component. DEM data was generated by small unmanned aerial vehicle(UAV)on key geomorphic units with resolution<0.05m. Based on the interpretation and field investigation, we get two conclusions:1)It is the first time to define the Reshui-Taostuo River Fault, and the fault is 40km long with a 6km-long surface rupture; 2)There are left-handed dislocations in the gullies and terraces cut by the fault. On the high-resolution DEM image obtained by UAV, the offsets are(9.3±0.5) m, (17.9±1.5) m, and(36.8±2) m, measured by topographic profile recovery of gullies. The recovery measurements of two terraces present that the horizontal offset of T₁/T₀ is(18.2±1.5) m and the T₂/T₁ is (35.8±2) m, which is consistent with the offsets from gullies. According to the historical earthquake records, a M5 3/4 earthquake on April 10, 1938 and a M_S5.0 earthquake on March 21, 1952 occurred at the eastern end of the surface rupture, which may be related to the activity of the fault. By checking the county records of Dulan and other relevant data, we find that there are no literature records about the two earthquakes, which is possibly due to the far distance to the epicenter at that time, the scarcity of population in Dulan, or that the earthquake occurred too long ago that led to losing its records. The southernmost ends of the Eastern Kunlun Fault and the Elashan Fault converge to form a wedge-shaped extruded fault block toward the northwest. The Dulan Basin, located at the end of the wedge-shaped fault block, is affected by regional NE and SW principal compressive stress and the shear stress of the two boundary faults. The Dulan Basin experienced a complex deformation process of compression accompanying with extension. In the process of extrusion, the specific form of extension is the strike-slip faults at each side of the wedge, and there is indeed a north-east and south-west compression between the two controlling wedge-shaped fault block boundary faults, the Eastern Kunlun and Elashan Faults. The inferred mechanism of triangular wedge extrusion deformation in this area is quite different from the pure rigid extrusion model. Therefore, Dulan Basin is a wedge-shaped block sandwiched between the two large-scale strike-slip faults. Due to the compression of the northeast and southwest directions of the region, the peripheral faults of the Dulan Basin form a series of southeast converging plume thrust faults on the northeast edge of the basin near the Elashan Fault, which are parallel to the Elashan Fault in morphology and may converge with the Elashan Fault in subsurface. The southern marginal fault of the Dulan Basin(Reshui-Taostuo River Fault)near the Eastern Kunlun fault zone is jointly affected by the left-lateral strike-slip Eastern Kunlun Fault and the right-lateral strike-slip Elashan Fault, presenting a left-lateral strike-slip characteristic. Meanwhile, the wedge-shaped fault block extrudes to the northwest, causing local extension at the southeast end, and the fault shows the extensional deformation. These faults absorb or transform the shear stress in the northeastern margin of the Tibet Plateau. Therefore, our discovery of the Dulan Reshui-Taostuo River Fault provides important constraints for better understanding of the internal deformation mode and mechanism of the fault block in the northeastern Tibetan plateau. The strike of Reshui-Taostuo River Fault is different from the southern marginal fault of the Qaidam Basin. The Qaidam south marginal burial fault is the boundary fault between the Qaidam Basin and the East Kunlun structural belt, with a total length of ~500km. The geophysical data show that Qaidam south marginal burial fault forms at the boundary between the positive gravity anomaly of the southern East Kunlun structural belt and the negative gravity anomaly gradient zone of the northern Qaidam Basin, showing as a thrust fault towards the basin. The western segment of the fault was active at late Pleistocene, and the eastern segment near Dulan County was active at early-middle Pleistocene. The Reshui-Taostuo River Fault is characterized by sinistral strike-slip with a normal component. The field evidence indicates that the latest active period of this fault was Holocene, with a total length of only 40km. Neither remote sensing image interpretation nor field investigation indicate the fault extends further westward and intersects with the Qaidam south marginal burial fault. Moreover, it shows that its strike is relatively consistent with the East Kunlun fault zone in spatial distribution and has a certain angle with the burial fault in the southern margin of Qaidam Basin. Therefore, there is no structural connection between the Reshui-Taostuo River Fault and the Qaidam south marginal burial fault.     

太白维山山前断裂活动特征的初步研究

本文立足于大量的野外第一手资料，综合解剖了太白维山山前断裂的几何结构，并就其运动学特征进行了初步探讨。认为：太白维山山前断裂第四纪以来的活动表现为正断型，其几何结构和运动特征都有着相同的分段性。我们将其划分为三段，西段结构简单，晚更新世以来无明显活动；中段结构复杂，一直强烈活动；东段活动强度较低。晚更新世晚期以来断裂（中段）的平均滑动速率０．４ｍｍ／ａ，全新世以来达到０．６７ｍｍ／ａ，而且这种速率     

SURFACE TRACKS AND SLIP RATE OF THE FAULT ALONG THE SOUTHERN MARGIN OF THE WUWEI BASIN IN THE LATE QUATERNARY

The fault along the southern margin of the Wuwei Basin, located in the eastern Hexi Corridor, NW China, plays an important role in the thrust fault system in the northern Qilian Mountains. The activities of this fault resulted in the generation of the Gulang earthquake(M_S8.0) in 1927. Based on remote sensing image interpretation, geological and geomorphic observations in the field and ¹⁴C geochronological dating results, we conducted a detailed research on the geometry and kinematics of the fault. According to the discontinuous geometric distribution and variable strike directions, we divide this fault into 5 segments: Kangningqiao Fault(F₁), Nanyinghe Fault(F₂), Shangguchengcun-Zhangliugou Fault(F₃), Tajiazhuang Fault(F₄)and Yanjiazhuang Fault(F₅). Results indicate that this fault, with a total of 60km long trace at the surface, has been active since the late Pleistocene. It behaves predominantly as a thrust fault and is accompanied with a locally sinistral strike-slip component along the Nanyinghe Fault(F₂). Intensive activities of this fault in Holocene have caused extensive occurrence of dislocated landforms along its strike. Some measured displacements of the dislocated geologic or geomorphic units, combined with the ¹⁴C dating results, yield a vertical slip rate of (0.44±0.08)mm/a on this fault in Holocene, and a sinistral strike-slip rate of (1.43±0.08)mm/a on the Nanyinhhe Fault (F₂) in late Pleistocene.     

SPECTRAL STRUCTURE OF VELOCITY INHOMOGENEITY OF CRUST MEDIUM BELOW THE SOUTHEASTERN MARGIN OF TIBETAN PLATEAU AND ITS ADJACENT REGIONS

In this paper we present results of spectral structure of crustal velocity inhomogeneity beneath the southeastern margin of Tibetan plateau and its adjacent region based on the S wave envelope broadening algorithm. The spectral structure of 8~16Hz band is selected to analyze the special character of crustal inhomogeneity and discuss the correlation between strong earthquakes and inhomogeneities. The result shows that strong and complex inhomogeneities of crustal medium are found in the southeastern margin of Tibetan plateau and its adjacent region. In the upper part of upper crust, the strong and small scale inhomogeneities are imaged in the Longmengshan fault zone and the north of the Anninghe fault zone, the weak and large scale inhomogeneites are imaged in the section from Huolu to Daofu of Xianshuihe fault zone and the south of the Anninghe fault zone. In the lower part of upper crust, strong inhomogeneites are found in the Longmengshan fault zone, Lianfeng fault zone, the north of the Anninghe fault zone and the sections from Huolu to Daofu of the Xianshuihe fault zone, weak inhomogeneites are found in the section from Daofu to Kangding of Xianshuihe fault zone. In the middle crust, strong inhomogeneities are observed in the section of the Baoxing to Dujiangyan, the Baoxing to Kangding, and Kangding to Shimian, and weak inhomogeneities are observed in the northwestern section from Huolu to Kangding, and the Lianfeng fault zone. Comparing the medium inhomogeneities with the location of the strong earthquakes, our results suggest existence of high correlation between them. Strong earthquakes are often located in the transitionary zone between the strong and the weak inhomogeneities. The spatial distribution of the strong and the weak medium inhomogeneities may be related to the broken medium from the strong movement of geological tectonic and the heat flow upwelling along active faults induced by frequent tectonic and volcanic activity.     

THE DISCUSSION FOR THE NEW ACTIVITY OF THE TIANQUAN SEGMENT OF LONGMENSHAN FAULT ZONE AND ITS RELATIONSHIP TO THE 1327 TIANQUAN EARTHQUAKE,SICHUAN

The 2008 Wenchuan earthquake occurred along the Longmen Shan fault zone, only five years later, another M7 Lushan earthquake struck the southern segment where its seismic risk has been highly focused by multiple geoscientists since this event. Through geological investigations and paleoseismic trenching, we suggest that the segment along the Shuangshi-Dachuan Fault at south of the seismogenic structure of the Lushan earthquake is active during Holocene. Along the fault, some discontinuous fault trough valleys developed and the fault dislocated the late Quaternary strata as the trench exposed. Based on analysis of historical records of earthquakes, we suggest that the epicenter of the 1327 Tianquan earthquake should be located near Tianquan and associated with the Shuangshi-Dachuan Fault. Furthermore, we compared the ranges of felt earthquakes(the 2013 M7 Lushan earthquake and the 1970 M_S6.2 Dayi earthquake)and suggest that the magnitude of the 1327 Tianquan earthquake is more possible between 6½ and 7. The southern segment of the Longmen Shan fault zone behaves as a thrust fault system consisting of several sub-paralleled faults and its deep structure shows multiple layers of decollement, which might disperse strain accumulation effectively and make the thrust system propagate forward into the foreland basin, creating a new decollement on a gypsum-salt bed. The soft bed is thick and does not facilitate to constrain fault deformation and accumulate strain, which produces a weak surface tectonic expression and seismic activity along the southern segment, this is quite different from that of the middle and northern segments of the Longmen Shan fault zone.     

TEXTUAL RESEARCH OF LONGXI EARTHQUAKE IN 47 BC IN GANSU PROVINCE AND ANALYSIS OF ITS CAUSATIVE STRUCTURE

On the day Wu-wu of the second month in the second year of Chuyuan period in the reign of Emperor Yuan of the western Han Dynasty, that is, April 17, 47 BC, an earthquake occurred near the county seat of Huandao County, Longxi Prefecture. This earthquake caused serious damages to the city wall, government office buildings and civilian houses in the Huandao county seat, many people died, landslides, ground fracturing and spring gushing, etc. occurred. On the basis of textual research on the historical earthquake data and the field investigation, we affirm that the ancient Huandao county seat locates at the new Wangjia Village of Santai, southeast of Wenfeng Town in Longxi County at present. The ancient Huandao county seat is the most seriously damaged area according to the historical earthquake data, so it should be in the meizoseismal area of this earthquake. The epicenter intensity of this earthquake is about 9~10 degrees, and the magnitude of this earthquake is estimated to be about 7. Considering the intensities of other towns damaged during this earthquake, we draw the isoseismal lines of this earthquake, with its major axis directed NNW. The direction of the major axis of the isoseismal lines and the location of the epicenter are approximately consistent with the strike of the western segment of the Gangu-Wushan secondary fault on the northern margin of western Qinling fault zone. This fault segment has clear evidences of new activity during late Holocene, which are characterized by left-lateral strike-slip faulting with normal components; the fault dips NE and faulted the T₁-T₂ pluvial and alluvial terraces. Up to now, there are some surface deformation traces, such as deeply-incised seismic fault grooves, densely developed structural tensional fractures in the loess stratum, landslides and a series of beaded dolines etc. Combining the results of relocation of small to moderate earthquakes in the research area and comprehensive analysis on their distribution features in plane and profile, we get the results that the causative structure of the 47 BC Longxi earthquake is the western segment of Gangu-Wushan secondary fault on the northern margin of western Qinling fault zone. This fault zone is an important active block boundary fault in the eastern margin of Tibeten block, and has the tectonic condition to generate M ≥ 7 large earthquakes in the past and in the future.