Two layers of Australasian impact ejecta in the Indian Ocean?

Abstract— Only 2 Australasian tektites have been found in the Indian Ocean, and both are associated with surficial sediments. We collected cores from both locations where the tektites have been reported. The microtektites in these cores (and both the tektites, as reported earlier) have chemical compositions within the compositional range previously reported for Australasian tektites and microtektites. In both locations, while the tektites are occurring at the sediment/water interface, the microtektites are found buried in older horizons beneath the seafloor at stratigraphic levels, conforming to the radiometric age of the strewn field. Thus, at first glance, there appear to be 2 layers of Australasian impact ejecta in the Indian Ocean. However, the manganese nodules are associated with the tektites which, although millions of years old, are invariably resting on recent sediments. Therefore, the mechanism that retains nodules at the seafloor also seems to be operative on the tektites, thus leading to this apparent “age paradox” of tektite/microtektite distribution in the Indian Ocean, although they both belong to the same impact event.     

Upper Eocene tektite and impact ejecta layer on the continental slope off New Jersey

Abstract— During Leg 150 of the Ocean Drilling Project (ODP), two sites (903C and 904A) were cored that have sediments of the same biostratigraphic age as the upper Eocene tektite-bearing ejecta layer at Deep Sea Drilling Project (DSDP) Site 612. Core 45X from ODP Site 904A (～4 km north of Site 612) contains a 5 cm thick tektite-bearing ejecta layer, and Core 56 from Site 903C (～8 km north-northwest of Site 904) contains a 2 cm thick layer of impact ejecta without any tektite or impact glass. Shocked quartz and feldspar grains, with multiple sets of planar deformation features (PDFs), and abundant coesite-bearing grains are present at both sites. The major oxide contents, trace element compositions, and rare earth element (REE) patterns of the Site 904 tektites are similar to those of the Site 612 tektites and to North American tektites (especially bediasites). The ?_Sr and ?_Nd values for one composite tektite sample from Site 904 fall within the range previously obtained for the Site 612 tektites, which defines a linear trend that, if extrapolated, would intersect the values obtained for North American tektites. The water contents of eight tektite fragments from Site 904 range from 0.017 to 0.098 wt%, and, thus, are somewhat higher than is typical for tektites. The heavy mineral assemblages of the 63–125 μm size fractions from the ejecta layers at Sites 612, 903, and 904 are all similar. Therefore, we conclude that the ejecta layer at all three sites is from the same impact event and that the tektites at Sites 904 and 612 belong to the North American tektite strewn field. Clinopyroxene-bearing (cpx) spherules occur below, or in the lower part of, the main ejecta layer at all three sites. At all three sites, the cpx spherules have been partly or completely replaced with pyrite that preserved the original crystalline textures. Site 612, 903, and 904 cpx spherules are similar to those found in the Caribbean Sea, Gulf of Mexico, central equatorial Pacific, western equatorial Pacific, and eastern Indian Ocean. The cpx event appears to have preceded the North American tektite event by 10–15 ka or less. The fining-upward sequence at all three sites and concentration of the denser, unmelted impact ejecta at the top of the tektite layer at Sites 612 and 904 suggest that the tektite-bearing ejecta layers are not the result of downslope redeposition and that the unmelted ejecta landed after the glass. Geographic variations in thickness of the tektite-bearing ejecta layer, the lack of carbonate clasts in the ejecta layer, and the low CaO content of the tektite glass suggest that the ejecta (including the tektite glass) were derived from the Chesapeake Bay structure rather than from the Toms Canyon structure. A sharp decline in microfossil abundances suggests that local environmental changes caused by the impact may have had adverse effects on benthic foraminifera, radiolaria, sponges, and fish as well as the planktic foraminifera.     

Australasian minitektites discovered in the Indian Ocean

Abstract— Large area sampling with a box core in the Indian Ocean has led to the discovery of minitektites (>1–3.75 mm long) and a tektite fragment (～1.25 mm) occurring with microtektites belonging to the Australasian tektite strewn field. Minitektites and the microtektites are found to have similar major element compositions conforming to the Australasian tektite/microtektite chemistry. Earlier studies based on isotopic evidence, dating, and chemistry had provided evidence of a single large tektite strewn field; however, the physical association of tektites occurring with microtektites has been lacking. The present study provides such an association.     

Sr and Nd analyses of upper Eocene spherules and their implications for target rocks

Abstract— Upper Eocene impact ejecta has been discovered all over the world. The number of upper Eocene impact layers and the geographic distribution of each layer, based on major chemical composition and biostratigraphic data, are not agreed upon. We have performed four Sr‐Nd isotopic analyses of clinopyroxene‐bearing spherules (cpx spherules) and three Sr‐Nd analyses of microtektites from five Deep Sea Drilling Project/Ocean Drilling Program (DSDP/ODP) sites in the South Atlantic and Indian Oceans. Our data support the hypothesis that there is only one cpx spherule layer in upper Eocene sediments. We also find that the microtektites associated with the cpx spherule layer in the South Atlantic and Indian Oceans are not part of the North American tektite strewn field, but belong to the same event that produced the cpx spherules. The microtektites, together with cpx spherules, are more heterogeneous than microtektites/tektites from other strewn fields. No direct link has been established between the microtektites from this study and possible target rock at the Popigai crater.     

Fragmentation and hydration of tektites and microtektites

Abstract— An examination of data collected over the last 30 years indicates that the percent of glass fragments vs. whole splash forms in the Cenozoic microtektite strewn fields increases towards the source crater (or source region). We propose that this is due to thermal stress produced when tektites and larger microtektites fall into water near the source crater while still relatively hot (>1150 °C). We also find evidence (low major oxide totals, frothing when melted) for hydration of most of the North American tektite fragments and microtektites found in marine sediments. High-temperature mass spectrometry indicates that these tektite fragments and microtektites contain up to 3.8 wt% H₂O. The H₂O-release behavior during the high-temperature mass-spectrometric analysis, plus high CI abundances (0.05 wt%), indicate that the North American tektite fragments and microtektites were hydrated in the marine environment (i.e., the H₂O was not trapped solely on quenching from a melt). The younger Ivory Coast and Australasian microtektites do not exhibit much evidence of hydration (at least not in excess of 0.5 wt% H₂O); this suggests that the degree of hydration increases with age. In addition, we find that some glass spherules (with <65 wt% SiO₂) from the upper Eocene clinopyroxene-bearing spherule layer in the Indian Ocean have palagonitized rims. These spherules appear to have been altered in a similar fashion to the splash form K/T boundary spherules. Thus, our data indicate that tektites and microtektites that generally contain >65 wt% SiO₂ can undergo simple hydration in the marine environment, while impact glasses (with <65 wt% SiO₂) can also undergo palagonitization.     

Source of Australasian tektites: Investigating possible impact sites in Laos

Abstract— The site of an impact event that spread ejecta in the form of tektites and microtektites over ～5 × 10⁷ km² of the southern Pacific and Indian Ocean area has not yet been discovered. A number of lines of evidence point toward a source in eastern Indochina. From an examination of a digital topographic data set and Landsat imagery, we identified four candidate structures in southern Laos, and we visited these sites in 1995 February. No evidence of impact origin of these structures could be found; flat-lying, undisturbed Mesozoic sedimentary rocks similar to those on Thailand's Khorat Plateau were found over the region. Small layered tektite fragments are relatively common in a lateritic horizon that is characterized by the presence of quartz pebbles. This scene is identical to the situation found several hundred kilometers to the southeast in Thailand. New tektite sites identified on this trip support a previous suggestion that there is a large region in southern NE Thailand and Laos that is rich in Muong Nong-type (layered) tektites but seemingly devoid of the splash-form type tektites.     

LATE EOCENE CRYSTAL-BEARING SPHERULES: TWO LAYERS OR ONE?

Late Eocene crystal-bearing spherules have been found in deep sea cores from the Caribbean Sea, Gulf of Mexico, equatorial Pacific Ocean, and eastern equatorial Indian Ocean. Keller et al. (1987) have suggested that the spherules from the western equatorial Pacific (Site 292, core 38) and eastern Indian Ocean (Site 216) are older (Globigerapsis semiinvoluta Zone) than those from the central equatorial Pacific, Gulf of Mexico, and Caribbean Sea (Globorotalia cerroazulensis Zone). The strongest argument in favor of two layers is the biostratigraphic data; however, published biostratigraphic interpretations are at odds with Keller et al.'s (1987) conclusions. Furthermore, paleomagnetic data for Site 292 seems to contradict Keller et al.'s conclusion that the spherules found in core 36 occur in sediments of the same stratigraphic age as those found in the central equatorial Pacific, Gulf of Mexico, and Caribbean Sea sites. Although the spherules from Sites 216 and 292 (core 38) do have higher average CaO, and lower average Al₂O₃ and FeO contents than the late Eocene spherules from the other sites, there is a great deal of overlap in composition. It is our opinion that the similarities in composition and petrography between the late Eocene crystal-bearing spherules are greater than the differences. Additionally, there seems to be a systematic change in composition and in amount of iridium excess from east to west when all the sites containing the crystal-bearing spherules are considered. We believe, therefore, that it is likely that the late Eocene crystal-bearing spherules all belong to a single event.     

Layered tektites of southeast Asia: Field studies in central Laos and Vietnam

Abstract— We have recovered 18 kg of layered tektites from 10 tektite-bearing localities in Laos and central Vietnam, including 5 localities around the town of Muong Nong (Laos). Several of these deposits originally contained several hundred kilograms of layered tektite fragments, and one fragmented mass may have been as large as 1000 kg. This is the largest single deposit of tektites yet reported. In this region, layered tektite fragments are found in isolated clusters usually associated with a pebbly laterite horizon that is 0–1 m below the surface. Near Khe Sanh, Vietnam, we estimate the abundance of layered tektite fragments to be ～100 g/m². This is greater than five times the abundance estimated for northeast Thailand (Fiske et al., 1996). In a region that extends from northeast Thailand, through central Laos, and into central Vietnam, we found only layered tektites, which confirmed the existence of a large (>50 000 km²) subfield of the Australasian strewn field with only layered tektites. The east-west extent of the “layered-only” subfield is well constrained, but little field data exist to constrain its north-south extent.     

Chemical variation within fragments of Australasian tektites

Abstract— In previous studies, intersample variation between compositions of different tektites from one particular group were studied and, in a few cases, major element variations within single tektites. No data for intra‐sample trace element variations existed. Thus, we sectioned a Muong Nong‐type tektite fragment from Vietnam and a splash‐form tektite fragment from the Philippines into eleven and six pieces, respectively, and analyzed the individual fragments for major and trace element contents. The compositions obtained agree well with those found in previous studies, supporting argument that tektites have been derived from terrestrial upper crustal sediments. Chemical variations within the tektite fragments are present, but do not show any systematic trends, probably reflecting incomplete mixing of parent rocks. The intra‐sample heterogeneity of the Muong Nong‐type tektite is more pronounced than that in the philippinite. For the Muong Nong‐type tektite, the intra‐sample variation in the trace element contents is higher than that for the major elements, again reflecting target rock properties. For the philippinite the intra‐sample variations mostly do not exceed the limits imposed by the precision of the analytical data, confirming that the splash form tektites are indeed well homogenized.     

Ocean Drilling Project Hole 689B spherules and upper Eocene microtektite and clinopyroxene-bearing spherule strewn fields

Abstract— Montanari et al. (1993) reported a positive Ir anomaly in the upper Eocene sediments from Ocean Drilling Program Hole 689B on the Maud Rise, Southern Ocean. Vonhof (1998) described microtektites and clinopyroxene-bearing (cpx) spherules associated with the Ir anomaly in Hole 689B and suggested that they belong to the North American and equatorial Pacific cpx strewn fields, respectively. We searched a suite of 27 samples taken through the spherule layer from Hole 689B, and we recovered 386 microtektites and 667 cpx spherules. We studied the petrography of the microtektites and cpx spherules and determined the major element compositions of 31 microtektites and 14 cpx spherules using energy dispersive x-ray analysis. We also determined the minor element compositions of eight microtektites using instrumental neutron activation analysis. We found that the peak abundance of cpx spherules is ～2 cm below the peak abundance of the microtektites (～128.7 m below sea floor), which suggests that the cpx spherule layer may be slightly older (～3–5 ka). The microtektites are mostly spherical and are generally transparent and colorless. They are similar to the North American microtektites in composition, the biggest differences being their generally lower Na₂O and generally higher Zr, Ba, and Ir (up to 0.3 ppb) contents. We agree with Vonhof (1998) that the Hole 689B microtektites probably belong to the North American tektite strewn field. We calculate that the number of microtektites (>125 μm)/cm² at Hole 689B is 52. This number is close to the concentration predicted by extrapolation of the trend of concentration vs. distance from the Chesapeake Bay structure, based on data from other North American microtektite-bearing sites. Thus, the North American strewn field may be at least four times larger than previously mapped. The Hole 689B cpx spherules range from translucent yellow to opaque black, but most are opaque tan to dark brown. They are generally spherical in shape and all are < 125 μm in diameter. Some contain Ni-rich spinels in addition to clinopyroxene microlites. The cpx spherules are petrographically and compositionally similar to cpx spherules previously found in the northwestern Atlantic Ocean, Caribbean Sea, Gulf of Mexico, equatorial Pacific, and eastern Indian Ocean. The abundance and widespread geographic occurrence of these spherules suggest that the strewn field may be global in geographic extent. Assuming a global extent, we estimate that there may be at least 25 billion metric tons of cpx spherules in the strewn field. Based on age, size, and geographic location, we speculate that the 100 km diameter Popigai crater in northern Siberia may be the source of the cpx spherule layer.     

A new discovery of parautochthonous moldavites in southwestern Poland,Central Europe

Moldavites represent tektites derived from the Ries impact structure (~24 km diameter, ~15 Myr old) in southern Germany. Two new localities with parautochthonous moldavites in southwestern Poland were found. In these localities, fluvial sediments of the so‐called Gozdnicka formation host the moldavites. Characteristic tektite features, especially bubbles and inclusions of lechatelierite, are reported. The moldavites' size distribution and their abraded shapes indicate that they were redeposited from the nearby Lusatia substrewn field.     

The Cuban Tektite Revisited

Abstract— A tektite, probably found in Cuba, was previously classified as belonging to the North American tektite strewn field on the basis of chemistry, age, isotopic, and petrographic characteristics. New major element analyses and trace element analyses show that the sample falls within the range of other North American tektites, and is close to the bediasite compositions. There are, however, some differences to normal georgiaites and bediasites. In a Na₂O/K₂O diagram the sample plots between the two distinct fields formed by georgiaites and bediasites. The rare earth elements and some lithophile trace elements are slightly enriched compared to bediasites, and much higher than in georgiaites. The discovery of tektite fragments from locations at Barbados and a DSDP site off the coast of New Jersey makes it likely that the North American strewn field is larger than previously thought, in agreement with microtektite distributions. Thus it is possible that the “Cuban” tektite really originated from Cuba.     

A 10.8-kg layered (Muong-Nong-type) tektite from Wenchang,Hainan, China

Abstract— A 10.79-kg layered tektite from Hainan is the largest tektite from China, and the fifth largest reported to date. It together with a 1.9-kg Hainan tektite described by Yuan (1981) greatly extends the area of the Australasian field within which layered tektites having masses > 1 kg have been found.     

New occurrences of Australasian microtektites in the Central Indian Basin

Abstract— Thirty-three microtektites have been recovered from four different sites in the Central Indian Basin. Based on their physical properties, geographical occurrence and chemical composition, they are identified as belonging to the Australasian tektite strewn field. Microtektites from three of the sites under study are from surficial samples implying bioturbation and/or erosion or non-deposition.     

The fate of moderately volatile elements in impact events—Lithium connection between the Ries sediments and central European tektites

Lithium abundances and isotope compositions are presented for a suite of sediments from the surroundings of the Ries Impact structure, paralleled by new Li data for central European tektites (moldavites) from several substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia), including a specimen from the newly discovered substrewn field in Poland. The data set was supplemented by three clay fractions isolated from sedimentary samples. Moldavites measured in this study show a very narrow range in δ⁷Li values (?0.6 to 0.3‰ relative to L‐SVEC) and Li contents (23.9–48.1 ppm). This contrasts with sediments from the Ries area which show remarkable range in Li isotope compositions (from ?6.9 to 13.4‰) and Li contents (0.6–256 ppm). The OSM sediments which, based on chemical similarity, formed the major part of moldavites, show a range in δ⁷Li values from ?2.0 to 7.9‰ and Li contents from 5.8 to 78.9 ppm. Therefore, the formation of moldavites was apparently accompanied by large‐scale mixing, paralleled by chemical and isotope homogenization of their parent matter. The proposed Li mixing model indicates that sands, clayey sediments, and low volumes of carbonates are the major components for tektite formation whereas residual paleokarst sediments could have been a minor but important component for a subset of moldavites. Striking homogenization of Li in tektites, combined with limited Li loss during impacts, may suggest that moderately volatile elements are not scavenged and isotopically fractionated during large‐scale collisions, which is consistent with recent models. In general, whether homogenization of bodies with distinct Li isotope systematics takes place, or collision of bodies with similar Li systematics operates cannot be resolved at present stage but Li isotope homogeneity of solar system planets and asteroidal bodies tentatively implies the latter.     

Impact microcrater morphology on Australasian microtektites

Abstract— Scanning electron microscopy of 137 Australasian microtektites and fragments from 4 sediment cores in the Central Indian Ocean reveals more than 2000 impact‐generated features in the size range of 0.3 to 600 μm. Three distinct impact types are recognized: destructive, erosive, and accretionery. A large variation in impact energy is seen in terms of catastrophic destruction demonstrated by fragmented microtektites through erosive impacts comprising glass‐lined pit craters, stylus pit craters, pitless craters, and a small number of accretionery features as well. The size range of observed microtektites is from 180 to 2320 μm, and not only are the smaller microtektites seen to have the largest number of impacts, but most of these impacts are also of the erosive category, indicating that target temperature is an important factor for retaining impact‐generated features. Further, microcratering due to collisions in impact‐generated plumes seems to exist on a larger and more violent scale than previously known. Although the microcraters are produced in a terrestrially generated impact plume, they resemble lunar microcraters in many ways: 1) the size range of impacts and crater morphology variation with increasing size; 2) dominant crater number densities in μm and sub‐μm sizes. Therefore, tektite‐producing impacts can lead to the generation of microcraters that mimic those found on lunar surface materials, and for the lunar rocks to qualify as reliable cosmic dust flux detectors, their tumbling histories and lunar surface orientations have to be known precisely.     

Constraints on the formation of layered tektites from the excavation and analysis of layered tektites from northeast Thailand

Abstract— The size, shape, composition, and vesicle content of 6 kg of layered tektite fragments, excavated near the town of Huai Sai, Thailand, place some constraints on the formation of layered tektites. The mass, shape, and distribution of the fragments are not consistent with an origin as a “puddle” of impact melt but suggest that they were derived from a single equant block. The presence of vesicles up to 7 mm in mean diameter within the tektite fragments suggests that the material was too viscous to allow for significant gravity-driven flow. These results suggest that layered tektites may be analogous to lava bombs, which may have been stretched and deformed in flight but underwent little flow after landing. Rather than being a product of “unusual circumstances,” such as multiple impacts, layered tektites may differ from splash-form tektites only in initial temperature of formation, speed of ejection, and small differences in initial composition.     

The Central Symmetry Analysis of Wrinkle Ridges in Lunar Mare Serenitatis

Wrinkle ridges are one of the most common structures usually found in lunar mare basalts, and their formations are closely related to the lunar mare. In this paper, wrinkle ridges in Mare Serenitatis were identified and mapped via high-resolution data acquired from SELENE, and a quantitative method was introduced to analyze the degree of central symmetry of the wrinkle ridges distributed in a concentric or radial pattern. Meanwhile, two methods were used to measure the lengths and orientations of wrinkle ridges before calculating their central symmetry value. Based on the mapped wrinkle ridges, we calculated the central symmetry value of the wrinkle ridges for the whole Mare Serenitatis as well as for the four circular ridge systems proposed by a previous study via this method. We also analyzed the factors that would cause discrepancies when calculating the central symmetry value. The results indicate that the method can be used to quantitatively analyze the degree of central symmetry of the linear features that were concentrically or radially oriented and can reflect the stress field characteristics.     

Changes in abundance and nature of microimpact craters on the surfaces of Australasian microtektites with distance from the proposed source crater location

Abstract– Over 4600 Australasian microtektites from 11 sediment cores along an N–S transect in the Central Indian Ocean have been investigated optically for microimpact features on their surfaces. Detailed scanning electron microscope examination of 68 microtektites along this transect shows 4091 such features. These samples are located between approximate distances of 3900–5000 km from the suggested impact site in Indochina and therefore constitute distal ejecta. The morphology of the microimpacts seems to show distinct variations with distance from the source crater. The total number of microcraters on each microtektite decreases drastically from North to South indicating systematic decrease in the spatial density of the ejecta, and decrease in collisional activity between microtektites with distance from the proposed source crater location. Closer to the proposed source crater location, the microcraters are predominantly small (few μm), pit bearing with radial and concentric cracks, suggestive of violent interparticle collisions. The scenario is reverse farther from the source crater with smaller numbers of impacted microtektites due to increased dispersion of the ejecta and the microcraters are large and shallow, implying gentle collisions with larger particles. These observations provide systematic ground truth for the processes that take place as the ejecta of a large oblique impact which generated the Australasian tektite strewn field is emplaced. The microimpacts appear to take place during the descent of the ejecta and their intensity and number density decrease as a function of the spatial density of the ejecta at any given place and with distance from the source region. These features could help understand processes that take place during ejecta emplacement on planets with substantial atmosphere such as Mars and Venus.