MAX, a Laue diffraction lens for nuclear astrophysics

The next generation of instrumentation for nuclear astrophysics will have to achieve a factor of 10–100 improvement in sensitivity over present technologies. With the focusing gamma-ray telescope MAX we take up this challenge: combining unprecedented sensitivity with high spectral and angular resolution, and the capability of measuring the polarization of the incident photons. The feasibility of such a crystal diffraction gamma-ray lens has recently been demonstrated with the prototype lens CLAIRE. MAX is a proposed mission which will make use of satellite formation flight to achieve 86 m focal length, with the Laue lens being carried by one satellite and the detector by the other. In the current design, the Laue diffraction lens of MAX will consist of 13740 copper and germanium (Ge_1−x Si _x , x ∼ 0.02) crystal tiles arranged on 36 concentric rings. It simultaneously focuses in two energy bands, each centred on one of the main scientific objectives of the mission: the 800–900 keV band is dedicated to the study of nuclear gamma-ray lines from type Ia supernovae (e.g. ⁵⁶ Co decay line at 847 keV) while the 450–530 keV band focuses on electron-positron annihilation (511 keV emission) from the Galactic centre region with the aim of resolving potential point sources. MAX promises a breakthrough in the study of point sources at gamma-ray energies by combining high narrow-line sensitivity (better than 10⁻⁶ cm⁻² s⁻¹) and high energy resolution (E/dE ∼ 500). The mission has successfully undergone a pre-phase A study with the French Space Agency CNES, and continues to evolve: new diffracting materials such as bent or composite crystals seem very promising. PACS: 95.55.Ka, 29.30.Kv, 61.10.-i     

CLAIRE: First light for a gamma-ray lens

The objective of the R&D project CLAIRE was to prove the principle of a gamma-ray lens for nuclear astrophysics. CLAIRE's Laue diffraction lens has a diameter of 45 cm and a focal length of 277 cm; 556 germanium-silicon crystals are tuned to focus 170 keV photons onto a 1.5 cm diameter focal spot. Laboratory measurements of the individual crystals and the entire lens have been used to validate a numerical model that we use to estimate the lens performance for a source at infinity. During a stratospheric balloon flight on 2001 June 14, CLAIRE was directed at the Crab nebula by a pointing system able to stabilize the lens to within a few arcseconds of the target. In 72 min of valid pointing time, 33 photons from the Crab were detected in the 3 keV bandpass of the lens: CLAIRE's first light! The performance of CLAIRE's gamma-ray lens, namely the peak reflectivity for a polychromatic source (9±1%), has been confirmed by ground data obtained on a 205 meter long test range. CLAIRE's measured performance validates the principle of a Laue lens for nuclear astrophysics, opening the way for a space-borne gamma-ray lens telescope that will achieve one to two orders of magnitude improvement in sensitivity over present technologies.     

Simulated performance of dedicated Ge-strip Compton telescopes as γ-lens focal plane instrumentation

With focusing of gamma rays in the nuclear-line energy regime starting to establish itself as a feasible and very promising approach for high-sensitivity γ-ray (line) studies of individual sources, optimizing the focal plane instrumentation for γ-ray lens telescopes is a prime concern. Germanium detectors offer the best energy resolution available at ∼2 keV FWHM at 1 MeV and thus constitute the detector of choice for a spectroscopy mission in the MeV energy range. Using a Compton detector focal plane has three advantages over monolithic detectors: additional knowledge about (Compton) events enhances background rejection capabilities, the inherently finely pixellated detector naturally allows the selection of events according to the focal spot size and position, and Compton detectors are inherently sensitive to γ-ray polarization. We use the extensive simulation and analysis package assembled for the ACT vision mission study to explore achievable sensitivities for different Ge Compton focal plane configurations as a first step towards determining an optimum configuration.CBW thanks the Townes Fellowship at UCB and NASA Grant NNG05WC28G for Support.     

A Si/CdTe Compton Camera for gamma-ray lens experiment

Cadmium telluride (CdTe) and cadmium zinc telluride (CdZnTe) have been regarded as promising semiconductor materials for hard X-ray and γ-ray detection. However, a considerable amount of charge loss in these detectors results in a reduced energy resolution. We have achieved a significant improvement in the spectral properties by forming the Schottky junction on the Te side of the CdTe wafer. With the further reduction of leakage current by an adoption of guard ring structure, we have demonstrated a CdTe pixel detector with high energy resolution and full charge collection capabilty. The detector has a pixel size of a few mm and a thickness of 0.5 $-$ 1 mm. We apply this high resolution detector to a new silicon and CdTe Compton Camera which features high angular resolution. We also describe a concept of the stack detector which consists of many thin CdTe layers and provides sufficient efficiency for hard X-rays and gamma-rays up to several hundred keV maintaining good energy resolution. A narrow-FOV Compton telescope can be realized by installing a Si/CdTe Compton Camera inside the deep well of an active shield. This configuration is very suitable as focal plane detector for future focusing gamma-ray missions.     

Performance of the Nuclear Compton Telescope

On 1 June 2005, the prototype Nuclear Compton Telescope (NCT) flew on a high altitude balloon from Fort Sumner, New Mexico. NCT is a balloon-borne soft γ-ray (0.2–10 MeV) telescope for studying astrophysical sources of nuclear line emission and γ-ray polarization. Our program is designed to develop and test technologies and analysis techniques crucial for the Advanced Compton Telescope; however, our detector design and configuration is also well matched to the focal plane requirements for focusing Laue lenses. The NCT prototype utilizes two, 3D imaging germanium detectors (GeDs) in a novel, ultra-compact design optimized for nuclear line emission in the 0.5–2 MeV range. Our prototype flight provides a critical test of the novel detector technologies, analysis techniques, and background rejection procedures developed for high resolution Compton telescopes.     

RHESSI as a Hard X-Ray Polarimeter

Although designed primarily as a hard X-ray imager and spectrometer, the Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) is also capable of measuring the polarization of hard X-rays (20–100 keV) from solar flares. This capability arises from the inclusion of a small unobstructed Be scattering element that is strategically located within the cryostat that houses the array of nine germanium detectors. The Ge detectors are segmented, with both a front and rear active volume. Low-energy photons (below about 100 keV) can reach a rear segment of a Ge detector only indirectly, by scattering. Low-energy photons from the Sun have a direct path to the Be and have a high probability of Compton scattering into a rear segment of a Ge detector. The azimuthal distribution of these scattered photons carries with it a signature of the linear polarization of the incident flux. Sensitivity estimates, based on Monte Carlo simulations and in-flight background measurements, indicate that a 20–100 keV polarization sensitivity of less than a few percent can be achieved for X-class flares.     

Copper Mosaic Crystals for Laue Lenses

Large single crystals of copper with an uniform and very narrow mosaic spread between 25 seconds and 1 minute of arc are now available at I.L.L. This result is of great interest in the construction of a Laue lens for astrophysical applications for which such quality copper single crystals may be used. The X-ray diffraction properties of copper single crystals produced at I.L.L. were studied for x-ray energies ranging from 100 keV to 400 keV. Several monocrystalline plates with different thicknesses and mosaic distributions were then prepared from the as-grown crystals in order to measure their diffraction efficiency as a function of energy. As expected, the value of the peak reflectivity depends on the crystal thickness. Reflectivity measurements show the excellent properties of copper crystals for gamma-ray diffraction. A peak reflectivity of 24% was measured at 220 keV from a copper single crystal of 3.75 mm thickness having a mosaic spread of 1.5 minutes of arc. Some technical aspects on the preparation of copper single crystal plates are also discussed.     

An “ESA-Affordable” Laue-lens

With ESA’s INTEGRAL mission gamma-ray astronomy has advanced to the point where major scientific advances must be expected from detailed studies of the many new point sources. The interest in developing focusing telescopes operating in the soft gamma-ray regime up to 1 MeV is therefore mounting rapidly. Telescopes based on Laue diffraction of gamma-rays from crystals appear as one promising route, although the practical difficulties of realizing a large scale Laue lens are certainly not small. In this paper I have attempted to develop an optimized lens design considering the size and mass constraints of a specific medium size launch vehicle. The introduction of the lens mass as a primary design driver has some surprising effects for the choice of material for the crystals and new tradeoff considerations are introduced.     

The X-Ray Facility of the Physics Department of the Ferrara University

We will report on the equipment and performance of the X-ray facility of the University of Ferrara. Initially developed to test the PDS (Phoswich Detection System) instrument aboard the BeppoSAX satellite and to perform reflectivity measurements of mosaic crystal samples of HOPG (Highly Oriented Pyrolytic Graphite), with time the facility has been improved and its applications extended. Now these applications include test and calibration of hard X-ray (> 10 keV) detectors, reflectivity measurements of hard X-ray mirrors, reflectivity tests of crystals and X-ray transparency measurements. The facility is being further improved in order to determine the optical axis mosaic crystals in Laue configuration within a project devoted to develop a hard X-ray (> 60 keV) focusing optics (Pisa, A. et al.: in press, Feasibility study of a Laue lens for hard X-rays for space astronomy, SPIE Proc., 5536).     

GRI: focusing on the evolving violent universe

The gamma-ray imager (GRI) is a novel mission concept that will provide an unprecedented sensitivity leap in the soft gamma-ray domain by using for the first time a focusing lens built of Laue diffracting crystals. The lens will cover an energy band from 200–1,300 keV with an effective area reaching 600 cm². It will be complemented by a single reflection multilayer coated mirror, extending the GRI energy band into the hard X-ray regime, down to ∼10 keV. The concentrated photons will be collected by a position sensitive pixelised CZT stack detector. We estimate continuum sensitivities of better than 10^− 7 ph cm^− 2s^− 1keV^− 1 for a 100 ks exposure; the narrow line sensitivity will be better than 3 × 10^− 6 ph cm^− 2s^− 1 for the same integration time. As focusing instrument, GRI will have an angular resolution of better than 30 arcsec within a field of view of roughly 5 arcmin—an unprecedented achievement in the gamma-ray domain. Owing to the large focal length of 100 m of the lens and the mirror, the optics and detector will be placed on two separate spacecrafts flying in formation in a high elliptical orbit. R&D work to enable the lens focusing technology and to develop the required focal plane detector is currently underway, financed by ASI, CNES, ESA, and the Spanish Ministery of Education and Science. The GRI mission has been proposed as class M mission for ESAs Cosmic Vision 2015–2025 program. GRI will allow studies of particle acceleration processes and explosion physics in unprecedented detail, providing essential clues on the innermost nature of the most violent and most energetic processes in the universe. All authors are on behalf of a large international collaboration The GRI mission has been proposed as an international collaboration between (in alphabetical order) Belgium (CSR), China (IHEP, Tsinghua Univ.), Denmark (DNSC, Southern Univ.), France (CESR, APC, ILL, CSNSM, IAP, LAM), Germany (MPE), Ireland (UCD School of Physics), Italy (INAF/IASF Rome, Bologna, Milano, Palermo; INAF/OA Brera, Roma; UNIFE, CNR/IMEM), Poland (NCAC), Portugal (Combra Univ., Evora Univ.), Russia (SINP, MSU, Ioffe Inst.), Spain (IEEC-CSIC-IFAE, CNM-IMB), the Netherlands (SRON, Utrecht Univ.), Turkey (Sabanci Univ.), United Kingdom (Univ. of Southampton, MSSL, RAL, Edinburgh Univ.), and the United States of America (SSL UC Berkeley, Argonne National Lab., MSFC, GSFC, US NRL).     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

Hard x-ray and gamma-ray imaging with solid state detectors

Solid state detectors are used in x-ray and gamma-ray astronomy primarily for their fine spectroscopy. For some cases (e.g., gamma-ray observations with Ge detectors), the spectroscopy and sensitivity requirements drive the design of the aperture systems and only moderate-quality imaging is possible. In other cases (e.g., hard x-ray observations), the detectors can be finely segmented for highquality imaging. The new room-temperature solid-state detectors like CdZnTe and HgI₂ are naturally well-suited for imaging. Because of their high atomic numbers, photoelectric absorption dominates over Compton scattering to >200 keV. This, combined with their high densities, allows thin detectors to be used with segmented contacts. Position resolution in the detector plane can be on 100 m scales giving sub-arcmin angular resolutions.     

The design of diamond Compton telescope

We have developed radiation detectors using the new synthetic diamonds. The diamond detector has an advantage for observations of “low/medium” energy gamma rays as a Compton telescope. The primary advantage of the diamond detector can reduce the photoelectric effect in the low energy range, which is background noise for tracking of the Compton recoil electron. A concept of the Diamond Compton Telescope (DCT) consists of position sensitive layers of diamond-striped detector and calorimeter layer of CdTe detector. The key part of the DCT is diamond-striped detectors with a higher positional resolution and a wider energy range from 10 keV to 10 MeV. However, the diamond-striped detector is under development. We describe the performance of prototype diamond detector and the design of a possible DCT evaluated by Monte Carlo simulations.      

High diffraction efficiency, broadband, diffraction crystals for use in crystal diffraction lenses

A major goal of the MAX program is to detect and measure gamma rays produced following the nuclear reactions that take place in a supernova explosion. To detect a reasonable number of supernovae, sensitivities of the order of a few times 10-7 γ cm-2sec-1 are needed – much better than possible with current instruments. The approach in the MAX program is to use a crystal diffraction lens to collect photons over a large area and concentrate them on a small well-shielded detector, greatly improving the signal to noise ratio. The crystals need to have both high diffraction efficiency and a relatively broad energy bandwidth. With mosaic crystals there is a trade-off between bandwidth and diffraction efficiency – one can have either high efficiency or large bandwidth, but not both without losing too much intensity through atomic absorption. A recent breakthrough in our understanding of crystal diffraction for high-energy gamma rays has made it possible to develop crystals that have both high diffraction efficiency and a relatively broad energy bandwidth. These crystals have near perfect crystal structure, but the crystalline planes are slightly curved. Such curved planes can be obtained in 3 different ways, by using mixed crystals with a composition gradient, by applying a thermal gradient, and by mechanically bending a near perfect crystal. A series of experiments have been performed on all three types of crystals using high-energy x-ray beams from the Advanced Photon Source at the Argonne National Laboratory. Experiments performed at 3 energies, 93 keV, 123 keV and 153 keV, with both the thermal gradient Si crystals and with the mechanically bent Si crystals, demonstrated that one can achieve diffraction efficiencies approaching 100% with moderate energy bandwidths (ΔE/E = 1.4%) and low atomic absorption (transmission = 0.65), in excellent agreement with theory. The use of this type of diffraction crystal is expected to increase the sensitivity of gamma ray telescopes by a factor of 5 over that possible with normal mosaic crystals.     

MAX: Formation flying for nuclear astrophysics

In 2004 CNES decided to perform 4 phase 0 studies dedicated to Astrophysics and achieved thanks to Formation Flying space systems: ASPICS (A Solar Physics Mission to observe in UV and Visible the Solar Corona between 1.01 and 3.2 Solar Radius), PEGASE (an IR interferometry mission to observe Hot Jupiter, Brown Dwarfs and Proto planetary disks), SIMBOL-X (hard X-rays telescope to observe: Accretion onto compact objects, Black Holes, obscured Galactic Nuclei, ˙˙˙˙) and MAX (a Nuclear Astrophysics Mission to observe: Supernovae, Neutron Stars,˙). For this last mission, presented here, two spectral bands around important gamma-ray lines have been selected (450–530 and 800–900 keV). The formation flight allows to realise a long focal length of 80–90 m which is necessary to build a reasonably sized gamma-ray telescope based on a Laue crystal lens. The Space System design allows to have a good spacecrafts mass margin in High Elliptical Orbit with a Soyuz launch (Initial Orbit: Perigee altitude ∼44,000 km and Apogee altitude ∼253,000 km).     

Self-standing bent silicon crystals for very high efficiency Laue lens

Silicon mono-crystals have been bent thanks to a series of parallel superficial indentations on one of the largest faces of the crystals. This technique relies on irreversible compression of the crystal beneath and beside the indentations. This latter causes deformation with no need for external device, resulting in a uniform self-standing curvature within the crystal. Indented Si crystals have been characterized at European Synchrotron Radiation Facility using a monochromatic beam ranging from 150 to 700 keV. Crystals exhibited very high diffraction efficiency over a broad range of energy, peaking 95% at 150 keV. Measured angular spread of the diffracted beam was always very close to the morphological curvature of the sample under investigation, proving that the energy passband of bent crystals can be controlled by simply imparting a selected curvature to the sample. The method of superficial indentations was found to offer high reproducibility and easy control of diffraction properties of the crystals. Moreover the method is cheap and simple, being based on mass production tools. A Laue lens made of crystals bent by superficial indentations can provide high-efficiency concentration of hard x-ray photons, leading significant improvement in many astrophysical applications.     

The RHESSI Spectrometer

RHESSI observes solar photons over three orders of magnitude in energy (3 keV to 17 MeV) with a single instrument: a set of nine cryogenically cooled coaxial germanium detectors. With their extremely high energy resolution, RHESSI can resolve the line shape of every known solar gamma-ray line except the neutron capture line at 2.223 MeV. High resolution also allows clean separation of thermal and non-thermal hard X-rays and the accurate measurement of even extremely steep power-law spectra. Detector segmentation, fast signal processing, and two sets of movable attenuators allow RHESSI to make high-quality spectra and images of flares across seven orders of magnitude in intensity. Here we describe the configuration and operation of the RHESSI spectrometer, show early results on in-flight performance, and discuss the principles of spectroscopic data analysis used by the RHESSI software.     

Onboard performance of the RT-2 detectors

The RT-2 Experiment onboard the CORONAS-PHOTON satellite is designed to study the spectral, temporal, and spatial details of solar hard X-ray flares in the 15–150 keV range. Above this energy (and upto 1000 keV), it also acts as an omni-directional gamma-ray detector with a capability to study gamma-ray bursts (GRB), bright solar flares, and X-ray pulsars. With an ensemble of hard X-ray detectors with different fields of view and coding devices, it also has the capability to investigate the spectrum of Cosmic Diffuse X-ray Background. The performance of the detectors from 2009 February to November is described in this paper. Results obtained on a few GRBs and solar flares are also briefly discussed.     

Highly reproducible quasi-mosaic crystals as optical components for a Laue lens

The realization of a Laue lens for astronomical purposes involves the mass production of a series of crystalline tiles as optical components, allowing high-efficiency diffraction and high-resolution focusing of photons. Crystals with self-standing curved diffraction planes is a valid and promising solution. Exploiting the quasi-mosaic effect, it turns out to be possible to diffract radiation at higher resolution. In this paper we present the realization of 150 quasi-mosaic Ge samples, bent by grooving one of their largest surface. We show that grooving method is a viable technique to manufacture such crystals in a simple and very reproducible way, thus compatible with mass production. Realized samples present very homogenous curvature. Furthermore, with a specific chemical etch, it is possible to fine adjust one by one the radius of curvature of the grooved samples. Realized crystals was selected for the ASI’s Laue project, that involves the implementation of a prototype of a Laue lens for hard X- and soft γ-ray astronomy.     

Optimization of the design of the hard X-ray polarimeter X-Calibur

We report on the optimization of the hard X-ray polarimeter X-Calibur for a high-altitude balloon-flight in the focal plane of the InFOCμS X-ray telescope from Fort Sumner (NM) in Fall 2013. X-Calibur combines a low-Z scintillator slab to Compton-scatter photons with a high-Z Cadmium Zinc Telluride (CZT) detector assembly to photo-absorb the scattered photons. The detector makes use of the fact that polarized photons Compton scatter preferentially perpendicular to the electric field orientation. X-Calibur achieves a high detection efficiency of order unity and reaches a sensitivity close to the best theoretically possible. In this paper, we discuss the optimization of the design of the instrument based on Monte Carlo simulations of polarized and unpolarized X-ray beams and of the most important background components. We calculate the sensitivity of the polarimeter for the upcoming balloon flight from Fort Sumner and for additional longer balloon flights with higher throughput mirrors. We conclude by emphasizing that Compton polarimeters on satellite borne missions can be used down to energies of a few keV.