Influence of slow active faults in probabilistic seismic hazard assessment: the northwestern margin of the València trough

Areas of low strain rate are typically characterized by low to moderate seismicity. The earthquake catalogs for these regions do not usually include large earthquakes because of their long recurrence periods. In cases where the recurrence period of large earthquakes is much longer than the catalog time span, probabilistic seismic hazard is underestimated. The information provided by geological and paleo-seismological studies can potentially improve seismic hazard estimation through renewal models, which assume characteristic earthquakes. In this work, we compare the differences produced when active faults in the northwestern margin of the València trough are introduced in hazard analysis. The differences between the models demonstrate that the introduction of faults in zones characterized by low seismic activity can give rise to significant changes in the hazard values and location. The earthquake and fault seismic parameters (recurrence interval, segmentation or fault length that controls the maximum magnitude earthquake and time elapsed since the last event or T_e) were studied to ascertain their effect on the final hazard results. The most critical parameter is the recurrence interval, where shorter recurrences produce higher hazard values. The next most important parameter is the fault segmentation. Higher hazard values are obtained when the fault has segments capable of producing big earthquakes. Finally, the least critical parameter is the time elapsed since the last event (T_e), when longer T_e produces higher hazard values.     

Local seismic hazard assessment in areas of weak to moderate seismicity—case study from Eastern Germany

Generally the seismic hazard of an area of interest is considered independent of time. However, its seismic risk or vulnerability, respectively, increases with the population and developing state of economy of the area. Therefore, many areas of moderate seismic hazard gain increasing importance with respect to seismic hazard and risk analysis. However, these areas mostly have a weak earthquake database, i.e., they are characterised by relative low seismicity and uncertain information concerning historical earthquakes. In a case study for Eastern Thuringia (Germany), acting as example for similar places in the world, seismic hazard is estimated using the probabilistic approach. Because of the lack of earthquakes occurring in the recent past, mainly historical earthquakes have to be used. But for these the actual earthquake sources or active faults, needed for the analysis, are imprecisely known. Therefore, the earthquake locations are represented by areal sources, a common practice. The definition of these sources is performed carefully, because their geometrical shape and size (apart from the earthquake occurrence model) influence the results significantly. Using analysis tools such as density maps of earthquake epicentres, seismic strain and energy release support this. Oversizing of areal sources leads to underestimation of seismic hazard and should therefore be avoided. Large location errors of historical earthquakes on the other hand are represented by several alternative areal sources with final superimposition of the different results. In a very similar way information known from macroseismic observations interpreted as source rather than as site effects are taken into account in order to achieve a seismic hazard assessment as realistic as possible. In very local cases the meaning of source effects exceeds those of site effects very likely. The influence of attenuation parameter variations on the result of estimated local seismic hazard is relatively low. Generally, the results obtained by the seismic hazard assessment coincide well with macroseismic observations from the thoroughly investigated largest earthquake in the region.     

Seismotectonics of Portugal and its adjacent area in the Atlantic

New elements on the seismicity of Portugal and new focal-mechanism solutions of earthquakes with epicentres situated off the coast of the Portuguese mainland and in the Azores region are presented. Historical seismicity data show that in the territory of the Portuguese mainland there are active faults that are responsible for earthquakes that have caused important damage and many casualties. However, most of the intraplate earthquakes with epicentres situated in the Portuguese mainland or near the shore are normally of small magnitude and this renders difficult their interpretation in the light of focal mechanisms. A solution for one earthquake, with magnitude 5 and epicentre at the Nazaré submarine canyon, is presented.Southwestwards of Cape St. Vincent there is an important seismic zone responsible for high-magnitude earthquakes such as that of 1 November 1755. This zone is situated in the region where the extension of the Messejana fault into the ocean joins with the Azores-Gibraltar fault.The seismicity of the area situated between the western coast of the Portuguese mainland and the Azores increases approximately along the 15°W meridian, from the latitude of the Azores-Gibraltar fault up to 44°N. Focal mechanisms of earthquakes with epicentres situated along this line show very similar solutions.The interpretation of the focal mechanism solutions of the earthquakes with epicentres situated in the studied area shows that the stress field trends approximately NW-SE. It is assumed that this stress field results from the interaction of the Eurasian and African plates; however, this direction is not maintained in the Azores region.     

湘东-赣西NNE向走滑断裂与地震、地热关系

该文重点研究了湘东、赣西地区ＮＮＥ向活动走滑断裂系与地震和温泉分布之间的密切联系。结果表明：①研究区地震和温泉主要集中在３条ＮＮＥ向主走滑断裂带及及伴生的Ｐ、Ｐ’断裂带;②高温热泉或强震震中区的基本构造样式为走滑断层左行、左阶雁列带和拉分盆地构造;③陆壳结构分层特征是影响该区地震作用强度的一个重要因素。     

Systematization of active faults for the assessment of the seismic hazard

A systematization of active faults has been developed based on the progress of scientists from the leading countries in the world in the study of seismotectonics and seismic hazard problems. It is underlain by the concept of the fault-block structure of the geological-geophysical environment governed by the interaction of differently oriented active faults, which are divided into two groups—seismogenic and nonseismogenic faults. In seismogenic fault zones, the tectonic stress accumulated is relieved by means of strong earthquakes. Nonseismogenic fault zones are characterized by creep displacement or short-term, oscillatory, and reciprocal movements, which are referred to local superintense deformations of the Earth’s crust (according to the terminology used by Yu.O. Kuz’min). For a situation when a strong earthquake happens, a subgroup of seismodistributing faults has been identified that surround the seismic source and affect the distribution of the seismic waves and, as a consequence, the pattern of the propagation of the coseismic deformations in the fault-block environment. Seismodistributing faults are divided into transit and sealing faults. Along transit faults, secondary coseismic effects (landfalls, landslides, ground fractures, liquefaction, etc) are intensified during earthquakes. In the case of sealing faults, enhancement of the coseismic effects can be observed on the disjunctive limb nearest to the epicenter, whereas, on the opposite limb, the intensity of such effects appreciably decreases. Seismogenic faults or their systems are associated with zones of earthquake source origination (ESO), which include concentrated seismicity regions. In such zones, each earthquake source is related to the evolution of a fault system. ESO zones also contain individual seismogenic sources being focuses of strong earthquakes with M of ≥5.5 in the form of ruptures, which can be graphically represented in 2D or 3D as a surface projection of the source. Depending on the type of data based on which they are identified, individual seismogenic sources are divided into geological-geophysical and macroseismic sources. The systematization presented is the theoretical basis for and the concept of the relational database that is being developed by the authors as an information system for the generation of seismotectonic GIS projects required for the subsequent analysis of the seismic hazard and the assessment of the probability of the origination of macroseismic earthquake effects in a predetermined location.     

从断层中心论向块体中心论转变--论活动块体在地震活动中的作用

讨论活动块体在地震活动中的作用。板缘地震在空间上呈线性分布,而中国大陆地震在空间上呈片状分布。大陆强震往往涉及两个以上方向断层的活动,且强震往往沿块体边界迁移或在其两侧断层上对迁。一些强震前后由中小地震震源机制解反映的Ｐ轴方向往往发生近９０°的转向,这种现象难以用区域应力方向变化来解释,但可从块体活动角度出发,用块体两个边界断层的先后错动来解释。地震前异常的远程效应、震后烈度异常分布图像以及地震序列特点等也显示了活动块体的作用。不同地区由地震活动性推测的块体活动方式有所差别,其原因可能和区域主压应力轴与块体两个边界断层走向的夹角不同有关。据此认为,在分析中国地震活动时要把视角从以活动断层为中心转变为以活动块体为中心     

辽宁地区主要断裂活动性和地震危险性评估

基于辽宁地区主要活动断裂的几何特征和空间展布，对1980年以来辽宁地区M_L≥2.0地震的累计频次和1900年以来M_s≥5.0地震的年发生率的空间分布及其与活动断裂构造背景关系进行研究，获得了基于地震学的辽宁省内主要断裂和构造区（带）的活动性与地震危险性的初步评估结果。辽宁地区主要断裂活动性较高的有海城河断裂、金州断裂九寨—盖州北段、朝阳—北票断裂等；辽宁地区未来3年发生M_s≥5.0地震危险性较高的断裂依次有海城河断裂、金州断裂、熊岳—庄河断裂、鸭绿江断裂及赤峰—开原断裂与柳河断裂交汇处等。在判定区域地震危险性和城市地震风险时，除了依据前兆异常的空间分布，还应充分考虑区内主要构造（断裂）的活动性与地震危险性。     

Landslide triggers along volcanic rock slopes in eastern Sicily (Italy)

A new dataset of landslides, occurred in a tectonically active region, has been analysed in order to understand the causes of the slope instability. The landslides we have dealt with took place along the volcanic rock cliff of S. Caterina and S. Maria La Scala villages (eastern Sicily, Italy), a densely inhabited area located on the eastern margin of Mt. Etna, where some seismogenic faults, locally named Timpe system, slip during moderate local earthquakes and also move with aseismic creep mechanisms. The results show that landslides are triggered by heavy rainfalls, earthquakes and creep fault episodes. Indeed, they occur along discrete fault segments, exhibiting a combination of both brittle failure, indicated by the earthquake occurrence, and aseismic creep events. The analysis of seismicity occurred on the Timpe fault system has shown that the active Acireale fault, in its southernmost segment, is subject to an aseismic sliding, which increases after the stick–slip motion in the nearby faults. Therefore, aseismic creep seems to concur in the predisposition of a rock to fail, since strains can increase the jointing of rock masses leading to a modification in the slope stability. Understanding the factors concurring to the slope instability is a useful tool for future assessments of the landslide hazard in densely settled areas, located on a volcanic edifice, such as Etna that is slowly sliding seawards, and where active faults, seismicity and heavy rains affect the deeply fractured slopes.     

隐伏活动正断层地区地下建筑的避让问题:以渭河断裂咸阳段为例

活断层对城市建设的影响长期以来受到科研人员与城市建设者的重视。活断层避让距离的确定直接影响活动断裂地区建筑物的选址。伴随着中国地下空间开发进入快速发展阶段,活动断裂地区的地下建筑选址问题应运而生。以隐伏活动正断层为例,综合考虑地下建筑震害影响、隐伏活动正断层地区地质背景、断裂活动性以及发震破坏特征,对活断层地区地下建筑的避让问题开展研究。研究表明：地下建筑受活断层发震的影响比地面建筑小,但断裂发震的影响依然需要重视;隐伏正断层破坏范围受多方面的影响因素控制,地下建筑避让距离的划定需以断层变形带的边界为起点进行;结合渭河断裂咸阳段的地质背景与断裂活动特点,确定断层上、下盘的避让距离分别为30 m和15 m,得出渭河断裂咸阳段地下30 m以浅限建带的宽度为140 m。     

对我国地震地质特点的一些初步认识

我国的地震地质工作是随着社会主义建设的进展而提出来的,在毛主席“备战,备荒,为人民”的号召下,自无产阶级文化大革命以来得到了更大的发展。本文是在整理中国地震地质资料的基础上写成的。由于地震地质的许多问题尚处于探索阶段,因此我们只是提出一些粗浅的看法,以便和从事这一工作的同志们共同讨论。     

Earthquake hazard of dams along the Mekong mainstream

In this study, the earthquake hazard was evaluated for all of 19 of the proposed or built dams along the Mekong River. All values representing a potential indication of hazardous earthquakes, such as the closest earthquake and seismogenic faults and including the seismic parameters required for a seismic safety evaluation, were clarified. The results will be useful in reviewing the safety of existing dams and for the design of suitable earthquake resistant specifications for any currently or future planned dam construction in this area. Seismotectonically, 14 of the 19 proposed Mekong River dams are located within an earthquake source zone. Most of faults are potentially still active, according to both seismicity and paleoseismological evidence. In addition, the maximum credible earthquakes were estimated to be in the range of 7–8 Mw for the closest fault zone of each dam. Previous isoseismal maps indicated a risk of shaking intensities of around scale III–IV (Modified Mercalli Intensity Scale) for the dams. According to the preliminary ranging of the International Commission on Large Dams, 9 of these 19 dams are classified as in an extreme hazard class and so need careful observation and monitoring of hazardous earthquakes. An effective mitigation plan should also be prepared for each operating dam.     

Controls on intra-plate seismicity in southwestern Australia

Although the Southwest Seismic Zone (SWSZ), located about 150 km to the east of Perth in southwestern Australia, is one of the most seismically active areas in Australia, there is little understanding as to why the earthquakes are occurring.An analysis of geophysical, geological and geodetic data from the area suggests that the SWSZ coincides with a Precambrian terrane boundary. Seismic data show that the terrane boundary zone dips at a shallow angle in a northeasterly direction. Reactivation of this ‘zone of weakness’ in the contemporary stress field (east–west maximum horizontal stress) is interpreted to be the first-order control on seismicity in the region.Gravity data show that the terrane boundary is offset by near-orthogonal structures, which are interpreted as faults. At least one of these trends corresponds with a linear zone of epicentres. The temporal and spatial distributions of epicentres associated with the 1968 Meckering earthquake (ML 6.9) suggest that the second-order distribution of seismicity in the SWSZ can be explained by the ‘intersection model’, whereby stresses are amplified by space problems associated with displacements on crosscutting faults.It is speculated that a zone of high density and high seismic velocity in the lower crust may also be a second-order control on the local seismicity. However, confirmation awaits better delineation of the extent of this zone.     

A multi-tiered earthquake hazard model for Australia

Earthquakes result from tectonic processes, and their distribution is strongly influenced by large-scale geology and the tectonic stress field. However, earthquake hazard estimates, particularly ground motion recurrence, have traditionally been computed using source models based primarily on instrumental and historical seismicity. In areas of low to moderate seismicity such as Australia, large earthquakes commonly occur in areas which have experienced little or no recent activity, making it difficult to develop source models based solely on seismicity.

The seismotectonic model developed for Australia that is presented here (AUS5) is based on geology, geophysics, tectonics and seismicity. The model was developed using a number of tiers of information, so that new information can easily be incorporated. The information used includes, but is not limited to, tectonic provinces, basins and ranges, gravity, magnetic, topography, and seismicity, all on a regional scale. On a local scale, for a site-specific earthquake hazard study, active faulting can be incorporated to provide fault source zones.

An earthquake hazard map showing peak ground acceleration with a 10% chance of exceedance in 50 years for southeastern Australia using the geologically defined seismotectonic model AUS5 is presented as an indication of how the model performs.     

First-order regional seismotectonic model for South Africa

A first-order seismotectonic model was created for South Africa. This was done using four logical steps: geoscientific data collection, characterisation, assimilation and zonation. Through the definition of subunits of concentrations of earthquake foci and large neotectonic and structural domains, seismotectonic structures, systems and domains were created. Relatively larger controls of seismicity exist between the Great Escarpment and the coast. In the south, this region is characterised by large aeromagnetic anomalies and large EW trending faults. In the west, it is characterised by the NW–SE trending Wegener stress anomaly, radial-trending dykes and earthquake clusters. In the east, it is characterised by a large neotectonic domain where several large historical earthquakes occurred. In the centre of South Africa, several clusters of earthquake activity are found, often related to mining activity. Further north, seismicity is related to both mining activity and neotectonic deformation. This work contributes to the development of a seismotectonic model for South Africa by (1) bringing together, digitally, several data sets in a common GIS platform (geology, geophysics, stress, seismicity, neotectonics, topography, crustal and mantle structure and anisotropy), (2) understanding the significance of data sets for seismotectonic zonation and limitations thereof and (3) obtaining a reasonable regional model for use in seismic hazard assessments.     

Cautious neotectonic hypotheses for assessing the seismic hazard in northeastern Italy

A simplified tectonic scheme for hazard purposes was recently adopted for northeastern Italy, introducing large generalized seismogenic areas containing systems of complex geometry faults. This scheme considers only major faults with documented seismic activity. In the present analysis, a different tectonic scheme, with linear elements as seismogenic sources, is presented. The assessment of the regional seismic hazard is done with the fault rupture model, its most important advantage being the recognition that the length of fault rupture during an earthquake is an important consideration in probabilistic calculations of seismic hazard. Moreover, some structures with no associated seismicity but with notable neotectonic activity are considered, and their contribution to the results investigated. Important uncertainties such as those in the maximum possible magnitude of future earthquakes, in the location of the fault, in the focal depth, and in the attenuation law are accounted for in the calculations and their influence studied. The results identify a seismic belt running from Lake Garda to Friuli and along the Yugoslav coast and are very similar to those already known for Friuli, with the largest values corresponding to the zone around Gemona. Some slight differences in the shape of the areas of equal acceleration are probably due to the delineation of the seismic sources of the proposed model. For a cautious elaboration, some neotectonic lines without present seismicity were added into the fault model. Their contribution is negligible in the areas of highest acceleration, but increases remarkably in the areas where acceleration is not expected to exceed the medium values.     

Seismicity and earthquake focal mechanisms in the Baikal rift zone

The seismicity of the Baikal rift zone is considered on the basis of instrumental and field observations. The spatial pattern of epicentres, the frequency of earthquakes and the relations between seismicity and the elements of fault tectonics are analyzed. The regional and local stress states in the crust of the Pribaikalye region, obtained from studying earthquake focal mechanisms for various energies are summarized.     

Spatial relationships between natural seismicity and faults, southeastern Ontario and north-central New York state

A statistical analysis was carried out to investigate spatial associations between natural seismicity and faults in southeastern Ontario and north-central New York State (between 73°18′ and 77°00′W and 43°30′ and 45°18′N). The study area is situated to the west of the seismically active St. Lawrence fault zone, and to the east of the Lake Ontario basin where recently documented geological and geophysical evidence points to possible neotectonic faulting. The weights of evidence method was used to judge the spatial associations between seismic events and populations of faults in eight arbitrarily defined orientation groups. Spatial analysis of data sets for seismic events in the periods 1930–1970 and post-1970 suggest stronger spatial associations between earthquake epicentres and faults with strikes that lie in the NW–SE quadrants, and weaker spatial associations of epicentres with faults that have strikes in the NE–SW quadrants. The strongest spatial associations were determined for groups of faults with strikes between 101° and 146°. The results suggest that faults striking broadly NW–SE, at high angles to the regional maximum horizontal compressive stress, are statistically more likely to be spatially associated with seismic events than faults striking broadly NE–SW. If the positive spatial associations can be interpreted as indicating genetic relationships between earthquakes and mapped faults, then the results may suggest that, as a population, NW–SE trending faults are more likely to be seismically active than NE–SW striking faults. Detailed geological studies of faults in the study area would be required to determine possible neotectonic displacements and the kinematics of the displacements.     

断块大地构造与地震活动的构造物理研究

断块大地构造理论几乎涉及地震活动的各个方面： 1）地震记录表明不但是强震,大多数6级以上地震也分布在构造块体边界上,构造块体控制了地震分布; 2）地震活动规律体现在块体整体活动中。例如,鄂尔多斯地块周边单个断陷带的地震活跃期与平静期长短不一,无明显规律。但当把鄂尔多斯地块周边作为一个整体,其地震活动在时间上显示了准周期性; 3）地块运动通过周边断层交替活动实现。从断层活动相互作用的时间间隔和错动形式出发可把它分为强震交替活动型（又可分长时间间隔和短时间间隔两类）和强震与弱震或断层蠕动交替活动型。强震交替活动型中时间间隔很短的双震活动较早被发现。强震交替活动型中时间间隔很长的类型虽然不易识别,但是依赖于中国历史地震目录,还是发现鄂尔多斯地块周边山西断陷带与渭河断陷带在历史上的3次交替活动等; 强震与弱震或断层蠕动型的交替活动型很不容易被发现,仅在台网较密,观测条件较好的北京地区观测到。4）利用一些实验结果讨论了交替活动的规律。此外,结合断块大地构造理论对一些地震现象进行了讨论。     

The 1905 Chamonix earthquakes: active tectonics in the Mont Blanc and Aiguilles Rouges massifs

Linking earthquakes of moderate size to known tectonic sources is a challenge for seismic hazard studies in northwestern Europe because of overall low strain rates. Here we present a combined study of macroseismic information, tectonic observations, and seismic waveform modelling to document the largest instrumentally known event in the French northern Alps, the April 29, 1905, Chamonix earthquake. The moment magnitude of this event is estimated at M_w 5.3 ± 0.3 from records in Göttingen (Germany) and Uppsala (Sweden). The event of April 29 was followed by several afterschocks and in particular a second broadly felt earthquake on August 13, 1905. Macroseismic investigations allow us to favour a location of the epicentres 5–10 km N–NE of Chamonix. Tectonic analysis shows that potentially one amongst several faults might have been activated in 1905. Among them the right lateral strike-slip fault responsible for the recent 2005 M_w = 4.4 Vallorcine earthquake and a quasi-normal fault northeast of the Aiguilles Rouges massif are the most likely candidates. Discussion of tectonic, macroseismic, and instrumental data favour the normal fault hypothesis for the 1905 Chamonix earthquake sequence.     

温州珊溪水库诱发地震构造条件

自2002年7月温州珊溪水库首次发生地震后,其地震活动持续至今,但目前人们对水库地震成因了解较少.基于对库区所处的区域地震地质背景、库区地形地貌、岩性及新构造运动特征的分析,采用野外地质调查的方法,获得了库区主要断层的地质特征,并评价了其渗透性.在此基础上,结合地震活动特征及震源机制解的研究成果,探讨了水库地震时间序列及发震机理.结果表明珊溪水库地震活动与库区岩性、断层(尤其是库区内的双溪-焦溪垟断层)及库水特征关系密切.水库地震主要发生在侏罗系凝灰岩夹砂岩、泥岩等隔水性好的层状岩层中,而渗透性较好的双溪-焦溪垟断层结构面则更利于库水下渗,这种岩体结构面组合方式一方面使库水容易沿断层结构面向深部渗透,另一方面断层结构面上的孔隙压力容易升高,因此降低了断层结构面上的正应力,应力平衡被打破,进而诱发地震.在水的渗透和地震活动的相互作用下,水库地震沿双溪-焦溪垟断层(尤其是第三分支断层)从SE向NW持续发生.