Imaging of Vp, Vs, and Poisson’s ratio anomalies beneath Kyushu, southwest Japan: Implications for volcanism and forearc mantle wedge serpentinization

We determine detailed 3-D V_p and V_s structures of the crust and uppermost mantle beneath the Kyushu Island, southwest Japan, using a large number of arrival times from local earthquakes. From the obtained V_p and V_s models, we further calculate Poisson’s ratio images beneath the study area. By using this large data set, we successfully image the 3-D seismic velocity and Poisson’s ratio structures beneath Kyushu down to a depth of 150 km with a more reliable spatial resolution than previous studies. Our results show very clear low V_p and low V_s anomalies in the crust and uppermost mantle beneath the northern volcanoes, such as Abu, Kujyu and Unzen. Low-velocity anomalies are seen in the mantle beneath most other volcanoes. In contrast, there are no significant low-velocity anomalies in the crust or in the upper mantle between Aso and Kirishima. The subducting Philippine Sea slab is imaged generally as a high-velocity anomaly down to a depth of 150 km with some patches of normal to low seismic wave velocities. The Poisson’s ratio is almost normal beneath most volcanoes. The crustal seismicity is distributed in both the high- and low-velocity zones, but most distinctly in the low Poisson’s ratio zone. A high Poisson’s ratio region is found in the forearc crustal wedge above the slab in the junction area with Shikoku and Honshu; this high Poisson’s ratio could be caused by fluid-filled cracks induced by dehydration from the Philippine Sea slab. The Poisson’s ratio is normal to low in the forearc mantle in middle-south Kyushu. This is consistent with the absence of low-frequency tremors, and may indicate that dehydration from the subducting crust is not vigorous in this region.     

Plate subduction,and generation of earthquakes and magmas in Japan as inferred from seismic observations: An overview

A dense nationwide seismic network recently constructed in Japan has been yielding large volumes of high-quality data that have made it possible to investigate the seismic structure in the Japanese subduction zone with unprecedented resolution. In this article, recent studies on the subduction of the Philippine Sea and Pacific plates beneath the Japanese Islands and the mechanism of earthquake and magma generation associated with plate subduction are reviewed. Seismic tomographic studies have shown that the Philippine Sea plate subducting beneath southwest Japan is continuous throughout the entire region, from Kanto to Kyushu, without disruption or splitting even beneath the Izu Peninsula as suggested in the past. The contact of the Philippine Sea plate with the Pacific plate subducting below has been found to cause anomalously deep interplate and intraslab earthquake activity in Kanto. Detailed waveform inversion studies have revealed that the asperity model is applicable to interplate earthquakes. Analyses of dense seismic and GPS network data have confirmed the existence of episodic slow slip accompanied in many instances by low-frequency tremors/earthquakes on the plate interface, which are inferred to play an important role in stress loading at asperities. High-resolution studies of the spatial variation of intraslab seismicity and the seismic velocity structure of the slab crust strongly support the dehydration embrittlement hypothesis for the generation of intraslab earthquakes. Seismic tomography studies have shown that water released by dehydration of the slab and secondary convection in the mantle wedge, mechanically induced by slab subduction, are responsible for magma generation in the Japanese islands. Water of slab origin is also inferred to be responsible for large anelastic local deformation of the arc crust leading to inland crustal earthquakes that return the arc crust to a state of spatially uniform deformation.     

Mechanical relation between crustal rheology,effective fault friction,and strike-slip partitioning among the Xiaojiang fault system,southeastern Tibet

The north–south trending Xiaojiang fault system accommodates ～10–12 mm/yr sinistral motions between southeastern Tibet and south China. In the south segment, the fault system composes mainly of four parallel strike-slip faults, namely from west to east, the Luzhijiang fault, the Yimen fault, the Puduhe fault, and the Xiaojiang fault. Geological and Seismological observations have shown that these strike-slip faults are all of active, while the slip rates of the Luzhijiang, the Yimen, and the Puduhe faults are much less than that of the Xiaojiang fault. We use finite element modeling to explore the mechanical relation between crustal rheology, effective fault friction and long-term slip rate partitioning among the four parallel faults. The individual faults are simplified as vertical discontinuities embedded in the crust as geophysical explorations have predicted. A large number of models are tested, associating with variations of the crustal rheolohy and the effective fault friction of individual faults. Result shows that if crust bounding the faults trends to behave like rigid blocks and decoupled mechanically from underlying layer, the modeled result is hard to approximate slip rates of the individual faults. To better fit slip rates of the individual faults, viscous deformation of the lower crust should be included. With a heterogeneously viscous lower-crust model that is built upon thermal structure of the heat flow data, associating with relatively low effective friction of the Xiaojiang fault, the modeled results fit the geological slip rates well, with ～1–1.5 mm/yr for the Luzhijiang, the Yimen and the Puduhe faults, and ～6–6.5 mm/yr for the Xiaojiang fault. Thus, in the southward movement of the Tibetan plateau around the eastern Himalayan syntaxis, slip partitioning among the Xiaojiang fault system should be related to viscous deformation of the lower crust associated with different strength of the individual faults, highlighting that deformation of this fault system is coupled mechanically between the frictional upper crust and the viscous lower crust.     

Three-dimensional P- and S-wave velocity structures beneath the Japan Islands obtained by high-density seismic stations by seismic tomography

We construct fine-scale 3D P- and S-wave velocity structures of the crust and upper mantle beneath the whole Japan Islands with a unified resolution, where the Pacific (PAC) and Philippine Sea (PHS) plates subduct beneath the Eurasian (EUR) plate. We can detect the low-velocity (low-V) oceanic crust of the PAC and PHS plates at their uppermost part beneath almost all the Japan Islands. The depth limit of the imaged oceanic crust varies with the regions. High-V_P/V_S zones are widely distributed in the lower crust especially beneath the volcanic front, and the high strain rate zones are located at the edge of the extremely high-V_P/V_S zone; however, V_P/V_S at the top of the mantle wedge is not so high. Beneath northern Japan, we can image the high-V subducting PAC plate using the tomographic method without any assumption of velocity discontinuities. We also imaged the heterogeneous structure in the PAC plate, such as the low-V zone considered as the old seamount or the highly seismic zone within the double seismic zone where the seismic fault ruptured by the earthquake connects the upper and lower layer of the double seismic zone. Beneath central Japan, thrust-type small repeating earthquakes occur at the boundary between the EUR and PHS plates and are located at the upper part of the low-V layer that is considered to be the oceanic crust of the PHS plate. In addition to the low-V oceanic crust, the subducting high-V PAC plate is clearly imaged to depths of approximately 250 km and the subducting high-V PHS zone to depths of approximately 180 km is considered to be the PHS plate. Beneath southwestern Japan, the iso-depth lines of the Moho discontinuity in the PHS plate derived by the receiver function method divide the upper low-V layer and lower high-V layer of our model at depths of 30–50 km. Beneath Kyushu, the steeply subducting PHS plate is clearly imaged to depths of approximately 250 km with high velocities. The high-V_P/V_S zone is considered as the lower crust of the EUR plate or the oceanic crust of the PHS plate at depths of 25–35 km and the partially serpentinized mantle wedge of the EUR plate at depths of 30–45 km beneath southwestern Japan. The deep low-frequency nonvolcanic tremors occur at all parts of the high-V_P/V_S zone—within the zone, the seaward side, and the landward side where the PHS plate encounters the mantle wedge of the EUR plate. We prove that we can objectively obtain the fine-scale 3D structure with simple constraints such as only 1D initial velocity model with no velocity discontinuity.     

Crustal density structure from 3D gravity modeling beneath Himalaya and Lhasa blocks,Tibet

The Himalaya and Lhasa blocks act as the main belt of convergence and collision between the Indian and Eurasian plates. Their crustal structures can be used to understand the dynamic process of continent–continent collision. Herein, we present a 3D crustal density model beneath these two tectonic blocks constrained by a review of all available active seismic and passive seismological results on the velocity structure of crust and lower lithosphere. From our final crustal density model, we infer that the present subduction-angle of the Indian plate is small, but presents some variations along the west–east extension of the orogenic belt: The dip angle of the Moho interface is about 8–9° in the eastern and western part of the orogenic belt, and about 16° in the central part. Integrating crustal P-wave velocity distribution from wide-angle seismic profiling, geothermal data and our crustal density model, we infer a crustal composition model, which is composed of an upper crust with granite–granodiorite and granite gneiss beneath the Lhasa block; biotite gneiss and phyllite beneath the Himalaya, a middle crust with granulite facies and possible pelitic gneisses, and a lower crust with gabbro–norite–troctolite and mafic granulite beneath the Lhasa block. Our density structure (<3.2 g/cm³) and composition (no fitting to eclogite) in the lower crust do not be favor to the speculation of ecologitized lower crust beneath Himalaya and the southern of Lhasa block.     

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.     

西秦岭晚新生代构造变形的几何图像、运动学特征及其动力机制

西秦岭位于东西向展布的秦岭-大别-苏鲁中央造山带与南北向展布的贺兰山-龙门山-川滇地震带构成的巨型"十字"构造区的交汇点,是中国大陆中部"西秦岭-松潘构造结"的重要组成部分.西秦岭晚新生代的构造变形与青藏高原的侧向扩展过程密切相关.该区构造变形的几何图像、运动特征及其深部动力学机制对于揭示青藏高原东北部的动力过程及强震...     

宽角反射、折射地震数据与重力数据综合解释龙门山及邻近地区地壳结构

青藏高原东部的隆升机制一直都是地学界的研究热点,研究学者们提出和发展了多种岩石圈变形模型,而存在多种模型的主要原因之一是对青藏高原东部地壳及岩石圈结构认识不足。本文主要针对SinoProbe-02项目横跨龙门山断裂带、全长400多公里的宽角、折射地震数据及重力数据进行联合反演和综合解释。研究结果表明,龙门山及邻近地区地壳结构可明确划分为上地壳、中地壳和下地壳。上地壳上层为沉积层,龙门山断裂带以西大部分区域被三叠纪复理岩覆盖,而在龙日坝断裂与岷江断裂之间出现了密度为2.7g/cm³的高速异常体;向东靠近龙门山地区,沉积层厚度逐渐减薄。中地壳速度变化不均一,而且变形强烈;若尔盖盆地和龙门山断裂带下方出现明显低速带;中地壳在龙门山西侧厚度加厚,在岷江断裂下方和四川盆地靠近龙门山断裂带地区附近厚度达到最大。莫霍面整体深度从东往西增厚,最厚可达56 km。本次研究得到的地壳结构和密度分布分析结果表明现有的地壳厚度和物质组成不足以支撑龙门山及邻近地区目前所达到的隆升高度,因此四川盆地刚性基底西缘因挤压作用产生的弯曲应力也是该地区抬升的重要条件之一。     

苏鲁造山带地壳上地幔结构层析成像研究

扬子与华北板块在三叠纪的俯冲碰撞形成了著名的苏鲁超高压造山带,其板块碰撞接触关系一直是热点问题.利用国家台网中心64个省台记录的1 079个近震事件的10 922个P波到时和251个远震事件的11 931个P波到时数据,采用远近震联合反演的层析成像方法对苏鲁地区进行了地壳上地幔速度结构反演.结果显示,研究区内两个低速异常区分别对应山东半岛西部的华北板块地幔上隆区和壳幔相互作用强烈的长江中下游成矿带地区.在地幔300 km深度之下出现的高速异常体可能代表了早中生代扬子与华北板块碰撞之前俯冲拆沉的古特提斯洋板块.传统观点的扬子板块岩石圈向北俯冲不明显,华北板块表现为向东南俯冲的高速特征.华北板块俯冲以苏鲁造山带中部的北纬35°为界,分为南北两种俯冲样式.北部俯冲不明显,华北板块停滞在郯庐断裂带以西;南部则表现华北板块向东南陡倾俯冲到苏鲁造山带之下.      

Crustal heterogeneities beneath the 2011 Talala,Saurashtra earthquake,Gujarat, India source zone: Seismological evidence for neo-tectonics

During the 1st decade of the 21st century, the study area of Talala, Saurashtra of western India witnessed three damaging earthquakes of moderate magnitude, year 2007 [Mw 5.0; Mw 4.8] and in the year 2011 [Mw 5.1] that generated public panic in the region. The last damaging moderate earthquake of the 20th October 2011 in Talala region (21.09°N;70.45°E), located at about 200 km south to the devastating 2001 Bhuj (23.412°N, 70.232°E) mainshock (Mw 7.6), jolted the entire Saurashtra region of Gujarat. A long series of aftershocks followed hereafter, recorded at nine seismograph/accelerograph stations. Hypocenters of aftershocks were relocated accurately using absolute and relative travel time (double-difference) method. In this study, we, for the first time, determined 3-D tomographic images of the upper crust beneath the 2011 Talala earthquake source zone by inverting about 1135 P and 1125 S wave arrival time data. Estimates of seismic velocities (Vp, Vs) and Poisson’s ratio (σ) structures offer a reliable interpretation of crustal heterogeneities and their bearing on geneses of moderate earthquakes and their aftershock sequences beneath the source zone. It is found that the 2011 Talala mainshock hypocenter depth (6 km) is located near the boundary of the low and high velocity (Vp, Vs) and the source zone is associated with low-σ anomalies guarded by the prominent high-σ anomalies along the active fault zone having strike-slip motion beneath the earthquake source zone. The pattern of distribution of (Vp, Vs, σ) and its association with occurrences of aftershocks provide seismological evidence for the neo-tectonics in the region having left lateral strike-slip motion of the fault.     

江南造山带中段地壳结构与成矿启示：基于广昌-浏阳剖面接收函数的认识

江南造山带位于华南大陆扬子块体和华夏块体之间，其深部地壳结构与变形特征记录了扬子块体与华夏块体拼合与相互作用的痕迹，且在其内部与邻区发育了丰富的多金属矿床，并形成了巨型Cu-Au-Pb-Zn-Ag多金属成矿带，是深化认识华南大陆地壳演化、岩浆作用与成矿系统的关键地域。针对华南大陆地区的地壳结构与成矿过程，国家科技重点研发计划“华南陆内成矿系统的深部过程与物质响应”项目在该区实施了一条密集宽频带地震流动探测剖面，旨在探测其深部结构与物性变化特征和深部成矿背景。本文利用其中江西广昌-湖南浏阳段长320km的宽频带地震流动台站数据开展了远震P波接收函数研究，获得了剖面辖区深部地壳结构和V_p/V_s变化特征。研究结果表明：(1)剖面Moho界面深度在29～35km之间变化，呈近穹窿状分布，平均Moho界面深度为31km左右，低于全球大陆地壳平均值，且与地形高程在整体上呈镜像相关，均衡程度较好；(2)剖面沿线地壳V_p/V_s在1.64～1.83之间呈波浪状起伏变化，平均值为1.72左右，且华夏块体略高于江南造山带...     

High-angle reverse faulting associated with the 1946 Nankaido earthquake

Analysis of vertical crustal deformation data in the southwestern part of Shikoku, southwest Japan, suggests that the Nankaido earthquake of 1946 (M_w = 8.1), which is a principal interplate thrust earthquake, was accompanied by subsidiary faulting on a splay fault adjacent to the coast of Shikoku. Discarding crustal movement resulting from the main thrusting of the Nankaido earthquake, local leveling data are explained by slip on a simple rectangular thrust fault located just offshore of Shikoku. Although it is difficult to constrain the fault location, a possible result is a high-angle thrust dipping landward at an angle of about 70°, with a dislocation of about 1.5 m, and source dimensions of 30 × 13 km along strike and dip. respectively. This result indicates that the fault may be one of the steeply dipping subsidiary faults branching from the main low-angle thrust, as was the case in the Alaska earthquake of 1964. Although several lines of evidence suggest that this faulting occurred as slow aseismic slip, its discrimination from the main seismic event is extremely difficult. This kind of high-angle thrusting just offshore of the coast would play an important role for the formation of the marine terraces during the late Quaternary period.     

Uplift and subsidence from oblique slip: the Ganos–Marmara bend of the North Anatolian Transform, western Turkey

Bends that locally violate plate-motion-parallel geometry are common structural elements of continental transform faults. We relate the vertical component of crustal motion in the western Marmara Sea region to the NNW-pointing 18° bend on the northern branch of the North Anatolian Fault (NAF-N) between the Ganos segment, which ruptured in 1912, and the central Marmara segment, a seismic gap. Crustal shortening and uplift on the transpressive west side of the bend results in the Ganos Mountain; crustal extension and subsidence on the transtensional east side produce the Tekirdağ Basin. We propose that this vertical component of deformation is controlled by oblique slip on the non-vertical north-dipping Ganos and Tekirdağ segments of the North Anatolian Fault. We compare Holocene with Quaternary structure across the bend using new and recently published data and conclude the following. First, bend-related vertical motion is occurring primarily north of the NAF-N. This suggests that this bend is fixed to the Anatolian side of the fault. Second, current deformation is consistent with an antisymmetric pattern centered at the bend, up on the west and down on the east. Accumulated deformation is shifted to the east along the right-lateral NAF-N, however, leading to locally opposite vertical components of long- and short-term motion. Uplift has started as far west as the landward extension of the Saros trough. Current subsidence is most intense close to the bend and to the Ganos Mountain, while the basin deepens gradually from the bend eastward for 28 km along the fault. The pattern of deformation is time-transgressive if referenced to the material, but is stable if referenced to the bend. The lag between motion and structure implies a 1.1–1.4 Ma age for the basin at current dextral slip rate (2.0–2.5 cm/year). Third, the Tekirdağ is an asymmetric basin progressively tilted down toward the NAF-N, which serves as the border fault. Progressive tilt suggests that the steep northward dip of the fault decreases with depth in a listric geometry at the scale of the upper crust and is consistent with reactivation of Paleogene suture-related thrust faults. Fourth, similar thrust-fault geometry west of the bend can account for the Ganos Mountain anticline/monocline as hanging-wall-block folding and back tilting. Oblique slip on a non-vertical master fault may accommodate transtension and transpression associated with other bends along the NAF and other continental transforms.     

菲律宾海四国海盆地壳结构重力反演及其形成演化过程分析

四国海盆是位于菲律宾海板块内由岛弧张裂形成的弧后盆地,其深部地壳结构对认识伊豆小笠原岛弧的裂解和弧后盆地的扩张过程有重要的意义.在反射多道地震剖面和深部海底地震（OBS）探测剖面的约束下,结合磁异常条带数据,利用两条横穿四国海盆的重力测线数据对海盆的地壳物性结构反演,对比重力反演剖面与深部探测剖面地壳厚度和密度特征,得到更加精细的四国海盆地壳结构.研究结果显示,四国海盆洋壳厚度自西向东逐渐增厚,在残留扩张脊处莫霍面深度迅速增加.根据地壳密度和厚度将四国海盆分为:洋壳减薄区、洋壳增厚区、后扩张洋壳增生区,分别对应初始慢速张裂、单翼快速扩张、对称慢速扩张3期扩张活动.南北测线不同构造分区得到的扩张速率与由磁异常条带得到扩张速率相同;洋壳减薄区下地壳均有高密度体,与OBS剖面中下地壳高速体相对应,可能是由于洋壳慢速扩张过程中强烈拆离作用,地幔蛇纹石化导致.      

Crustal Structure of the Crimean Mountains along the Sevastopol–Kerch Profile from the Results of DSS and Local Seismic Tomography

The paper discusses the velocity structure of the crust beneath the Crimean Mountains from the results of active and passive seismic experiments. Based on a new interpretation of seismic data from the old Sevastopol–Kerch DSS profile by modern full-wave seismic modeling methods, a velocity model of the crust beneath the Crimean Mountains has been constructed for the first time. This model shows the significant differences in the structure of two crustal blocks: (1) one characterized by higher velocities and located in the western and central Crimean Mountains, and (2) the other characterized by lower velocities and located in the east, in the Feodosiya–Kerch zone, which are subdivided by a basement uplift (Starokrymskoe Uplift). The former block is characterized by a more complex structure, with the Moho traced at depths of 43 and 55 km, forming two Moho discontinuities: the upper one corresponds to the platform stage, and the lower one, formed presumably at the Alpine stage of tectogenesis as a result of underthrusting of the East Black Sea microplate beneath the southern margin of the Scythian Plate in Crimea. At depths of 7–11 km, velocity inversion zone has been identified, indicating horizontal layering of the crust. Local seismic tomography using the data on weak earthquakes (m_b ≤ 3) recorded by the Crimean seismological network allowed us to obtain data on the crustal structure beneath the Crimean Mountains at depths of 10–30 km. The crustal structure at these depths is characterized by the presence of several high-velocity crustal bodies in the vicinity of cities Yalta, Alushta, and Sudak, with earthquake hypocenters clustered within these bodies. Comparison of this velocity model of the Crimean Mountains with the seismicity distribution and with the results from reconstruction of paleo- and present-day stress fields from field tectonophysical study and earthquake focal mechanisms allowed the conclusion that the Crimean Mountains were formed as a result of on mature crust at the southern margin of the East European Platform and Scythian Plate, resulting from processes during various phases of Cimmerian and Alpine tectogenesis in the compressional and transpressional geodynamic settings. The collisional process is ongoing at the present-day stage, as supported by high seismicity and uplift of the Crimean Mountains.     

Crustal thinning beneath the Rwenzori region, Albertine rift, Uganda, from receiver-function analysis

The Rwenzori mountains in western Uganda, with a maximum elevation of more than 5,000 m, are located within the Albertine rift valley. We have deployed a temporary seismic network on the Ugandan side of the mountain range to study the seismic velocity structure of the crust and upper mantle beneath this section of the rift. We present results from a receiver-function study revealing a simple crustal structure along the eastern rift flank with a more or less uniform crustal thickness of about 30 km. The complexity of inner-crustal structures increases drastically within the Rwenzori block. We apply different inversion techniques to obtain reliable results for the thickness of the crust. The observations expose a significantly thinner crust beneath the Rwenzori range with thickness values ranging from about 20–28 km beneath northern and central parts of the mountains. Our study therefore indicates the absence of a crustal root beneath the Rwenzori block. Beneath the Lake Edward and Lake George basins we detect the top of a layer of significantly reduced S-wave velocity at 15 km depth. This low-velocity layer may be attributed to the presence of partial melt beneath a region of recent volcanic activity.     

Crustal structure in an onshore–offshore transitional zone near Hong Kong,northern South China Sea

To study the crustal structure beneath the onshore–offshore transitional zone, a wide-angle onshore–offshore seismic experiment was carried out in northern South China Sea near Hong Kong, using large volume airgun sources at sea and seismic stations on land. The crustal velocity model constructed from traveltime fitting shows that the sedimentary thickness abruptly increases seaward of the Dangan Islands based on the characteristics of Pg and Multiple Pg, and the crustal structure beneath the sedimentary layer is relatively simple. The Moho depth is about 25–28 km along the profile and the P-wave velocity increases gradually with depth. The velocities in the upper crust range from 5.5 to 6.4 km/s, while that in the lower crust is 6.4–6.9 km/s. It also reveals a low velocity zone with a width of more than 10 km crossing the crust at about 75–90 km distance, which suggests that the Littoral Fault Zone (LFZ) exists beneath the onshore–offshore transitional zone. The magnetism anomalies, bouguer gravity anomalies and active seismic zone along the coastline imply the LFZ is a main tectonic fault in the onshore–offshore area. Combined with two previously published profiles in the continental South China (L–G profile) and in the northern margin of South China Sea (OBS1993) respectively, we constructed a land-sea super cross-section about 1000 km long. The results show the onshore–offshore transitional zone is a border separating the unstretched and the stretched continental crust. The low velocity layer (LVL) in the middle crust was imaged along L–G profile. However, the high velocity layer (HVL) in the lower crust was detected along OBS1993. By analyzing the mechanisms of the LVL in the middle crust and HVL in the base of crust, we believe the crustal structures had distinctly different attributes in the continental South China and in the northern SCS, which indicates that the LFZ could be the boundary fault between them.     

青藏高原的地幔结构:地幔羽、地幔剪切带及岩石圈俯冲板片的拆沉

通过横穿青藏高原近 80 0 0km长的 4条天然地震层析剖面 ,获得 4 0 0km深度以上的地壳和地幔速度图像及地震波各向异性 ,揭示了青藏高原 4 0 0km深度范围内的地壳和地幔结构特征。地幔速度图像显示 ,青藏高原腹地的深地幔中存在以大型低速异常体为特征的地幔羽 ,其可能通过热通道与大面积分布的可可西里新生代高钾碱性火山作用有成因联系 ;阿尔金、康西瓦、金沙江、嘉黎及雅鲁藏布江等走滑断裂可下延至 30 0～ 4 0 0km深度 ,显示了低速高热物质组成的垂向低速异常带特征及大型超岩石圈或地幔剪切带的产出 ;发现康西瓦、东昆仑—金沙江、班公湖—怒江和雅鲁藏布缝合带下部存在不连续的高速异常带 ,可以解释为青藏高原地体拼合及碰撞过程中可能保留的加里东、古特提斯和中特提斯大洋岩石圈“化石”残片 ,是“拆沉”的地球物理证据。印度大陆岩石圈的巨厚俯冲板片以 15～ 2 0°倾角向北插入唐古拉山下 30 0km深处 ,并被高热物质组成的地幔剪切带分开。结合新的横穿喜马拉雅及青藏高原的地幔层析资料 ,提出青藏高原碰撞动力学新模式 :青藏高原南部印度岩石圈板片的翻卷式陆内超深俯冲 ,北缘克拉通向南的陆内俯冲 ,腹地深部的地幔羽上涌 ,以及地幔范围内的高原“右旋隆升”及物质向东及北东方向运动及挤出。     

Crustal structure beneath Kottamiya broadband station,northern Egypt,from analysis of teleseismic receiver functions

We analyzed a total of 206 receiver functions beneath Kottamiya broadband station in northern Egypt to study the crustal structure and any azimuthal variations in the crustal thickness. The computed receiver functions are subdivided according to their azimuth into eight subgroups and analyzed separately using a genetic algorithm. The genetic algorithm is more appropriate than conventional linearized inversion schemes in regions where there is little a priori information about local crustal structures such as northern Egypt because it does not strongly depend on an initial model. The study region is located on the unstable shelf of Egypt in the northeastern corner of Africa. Little information about the deep structure of the crust beneath this region is available. For this reason, we have adopted the genetic algorithm to seismic waveform data recorded by Kottamiya broadband station. The crustal thickness varies slightly from 32 to 34 km with an average of 32.25 km, which is consistent with previous studies in the region. The crustal thickness shows a tendency of decrease toward the east and northeast being consistent with the general tectonic setting of the region including the opening of the Red Sea in the Tertiary times. Nonetheless, more teleseismic receiver functions from earthquakes recorded at denser seismic stations in northern Egypt and the southeastern Mediterranean combined with surface wave dispersion data as well as other geophysical investigations are necessary for more detailed imaging of the crustal structure which will deepen our understanding of the current tectonic and seismic activities of the region.     

Seismotectonics of strike–slip earthquakes within the deep crust of southern Italy: Geometry, kinematics, stress field and crustal rheology of the Potenza 1990–1991 seismic sequences (Mmax 5.7)

We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002  140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust.