The crystal structure of ilinskite, NaCu5O2(SeO3)2Cl3, and review of mixed-ligand CuOmCln coordination geometries in minerals and inorganic compounds

The crystal structure of ilinskite, NaCu₅O₂(SeO₃)₂Cl₃, a rare copper selenite chloride from volcanic fumaroles of the Great fissure Tolbachik eruption (Kamchatka peninsula, Russia), has been solved by direct methods and refined to R ₁?=?0.044 on the basis of 2720 unique observed reflections. The mineral is orthorhombic, Pnma, a?=?17.769(7), b?=?6.448(3), c?=?10.522(4) Å, V?=?1205.6(8) ų, Z?=?4. The The CuO_mCl_n coordination polyhedra share edges to form tetramers that have 'additional' O1 and O2 atoms as centers. The O1Cu₄ and O2Cu₄ tetrahedra share common Cu atoms to form [O₂Cu₅]⁶⁺ sheets. The SeO₃ groups and Cl atoms are adjacent to the [O₂Cu₅]⁶⁺ sheets to form complex layers parallel to (100). The Na⁺ cations are located in between the layers. A review of mixed-ligand CuO_mCl_n coordination polyhedra in minerals and inorganic compounds is given. There are in total 26 stereochemically different mixed-ligand Cu-O-Cl coordinations.     

Structural thermal behavior of paragonite and its dehydroxylate: a high-temperature single-crystal study

 The lattice constants of paragonite-2M₁, NaAl₂(AlSi₃)O₁₀(OH)₂, were determined to 800 °C by the single-crystal diffraction method. Mean thermal expansion coefficients, in the range 25–600 °C, were: α_a = 1.51(8) × 10⁻⁵, α_b = 1.94(6) × 10⁻⁵, α_c = 2.15(7) ×  10⁻⁵ °C⁻¹, and α_V = 5.9(2) × 10⁻⁵ °C⁻¹. At T higher than 600 °C, cell parameters showed a change in expansion rate due to a dehydroxylation process. The structural refinements of natural paragonite, carried out at 25, 210, 450 and 600 °C, before dehydroxylation, showed that the larger thermal expansion along the c parameter was mainly due to interlayer thickness dilatation. In the 25–600 °C range, Si,Al tetrahedra remained quite unchanged, whereas the other polyhedra expanded linearly with expansion rate proportional to their volume. The polyhedron around the interlayer cation Na became more regular with temperature. Tetrahedral rotation angle α changed from 16.2 to 12.9°. The structure of the new phase, nominally NaAl₂ (AlSi₃)O₁₁, obtained as a consequence of dehydroxylation, had a cell volume 4.2% larger than that of paragonite. It was refined at room temperature and its expansion coefficients determined in the range 25–800 °C. The most significant structural difference from paragonite was the presence of Al in fivefold coordination, according to a distorted trigonal bipyramid. Results confirm the structural effects of the dehydration mechanism of micas and dioctahedral 2:1 layer silicates. By combining thermal expansion and compressibility data, the following approximate equation of state in the PTV space was obtained for paragonite: V/V ₀ = 1 + 5.9(2) × 10⁻⁵ T(°C) − 0.00153(4) P(kbar). Received: 12 July 1999 / Revised, accepted: 7 December 1999     

A thermodynamic analysis of the system LiAlSiO4-NaAlSiO4-Al2O3-SiO2-H2O based on new heat capacity, thermal expansion, and compressibility data for selected phases

Heat capacity, thermal expansion, and compressibility data have been obtained for a number of selected phases of the system NaAlSiO₄-LiAlSiO₄-Al₂O₃-SiO₂-H₂O. All C _p measurements have been executed by DSC in the temperature range 133–823 K. The data for T ≥ 223 K have been fitted to the function C _p (T) = a + cT ⁻² + dT ^−0.5 + fT ⁻³, the fit parameters being The thermal expansion data (up to 525 °C) have been fitted to the function V ⁰(T) = V ⁰(T) [1 + v ₁ (T−T ⁰) + v ₂ (T−T ⁰)²], with T ⁰ = 298.15 K. The room-temperature compressibility data (up to 6 GPa) have been smoothed by the Murnaghan equation of state. The resulting parameters are These data, along with other phase property and reaction reversal data from the literature, have been simultaneously processed by the Bayes method to derive an internally consistent thermodynamic dataset (see Tables 6 and 7) for the NaAlSiO₄-LiAlSiO₄-Al₂O₃-SiO₂-H₂O quinary. Phase diagrams generated from this dataset are compatible with cookeite-, ephesite-, and paragonite-bearing assemblages observed in metabauxites and common metasediments. Phase diagrams obtained from the same database are also in agreement with the cookeite-free, petalite-, spodumene-, eucryptite-, and bikitaite-bearing assemblages known to develop in the subsolidus phase of recrystallization of␣lithium-bearing pegmatites. It is gratifying to note that the cookeite phase relations predicted earlier by Vidal and Goffé (1991) in the context of the system Li₂O-Al₂O₃-SiO₂-H₂O agree with our results in a general way. Received: 19 May 1998 / Accepted: 25 June 1998     

Thermal expansion of gehlenite, Ca2Al[AlSiO7], and the related aluminates LnCaAl[Al2O7] with Ln = Tb, Sm

The thermal expansion of gehlenite, Ca₂Al[AlSiO₇], (up to T=830 K), TbCaAl[Al₂O₇] (up to T=1100 K) and SmCaAl[Al₂O₇] (up to T=1024 K) has been determined. All compounds are of the melilite structure type with space group Thermal expansion data were obtained from in situ X-ray powder diffraction experiments in-house and at HASYLAB at the Deutsches Elektronen Synchrotron (DESY) in Hamburg (Germany). The thermal expansion coefficients for gehlenite were found to be: α₁=7.2(4)×10⁻⁶×K⁻¹+3.6(7)×10⁻⁹ΔT×K⁻² and α₃=15.0(1)×10⁻⁶×K⁻¹. For TbCaAl[Al₂O₇] the respective values are: α₁=7.0(2)×10⁻⁶×K⁻¹+2.0(2)×10⁻⁹ΔT×K⁻² and α₃=8.5(2)×10⁻⁶×K⁻¹+2.0(3)×10⁻⁹ΔT×K⁻², and the thermal expansion coefficients for SmCaAl[Al₂O₇] are: α₁=6.9(2)×10⁻⁶×K⁻¹+1.7(2)×10⁻⁹ΔT×K⁻² and α₃=9.344(5)×10⁻⁶×K⁻¹. The expansion mechanisms of the three compounds are explained in terms of structural trends obtained from Rietveld refinements of the crystal structures of the compounds against the powder diffraction patterns. No structural phase transitions have been observed. While gehlenite behaves like a ‘proper’ layer structure, the aluminates show increased framework structure behavior. This is most probably explained by stronger coulombic interactions between the tetrahedral conformation and the layer-bridging cations due to the coupled substitution (Ca²⁺+Si⁴⁺)–(Ln ³⁺+Al³⁺) in the melilite-type structure. This article has been mistakenly published twice. The first and original version of it is available at .     

Thermal expansion of gehlenite, Ca2Al[AlSiO7], and the related aluminates LnCaAl[Al2O7] with Ln=Tb, Sm

The thermal expansion of gehlenite, Ca₂Al[AlSiO₇], (up to T=830 K), TbCaAl[Al₂O₇] (up to T=1,100 K) and SmCaAl[Al₂O₇] (up to T=1,024 K) has been determined. All compounds are of the melilite structure type with space group Thermal expansion data was obtained from in situ X-ray powder diffraction experiments in-house and at HASYLAB at the Deutsches Elektronen Synchrotron (DESY) in Hamburg (Germany). The thermal expansion coefficients for gehlenite were found to be: α₁=7.2(4)×10⁻⁶ K⁻¹+3.6(7)×10⁻⁹ΔT K⁻² and α₃=15.0(1)×10⁻⁶ K⁻¹. For TbCaAl[Al₂O₇] the respective values are: α₁=7.0(2)×10⁻⁶ K⁻¹+2.0(2)×10⁻⁹ΔT K⁻² and α₃=8.5(2)×10⁻⁶ K⁻¹+2.0(3)×10⁻⁹ΔT K⁻², and the thermal expansion coefficients for SmCaAl[Al₂O₇] are: α₁=6.9(2)× 10⁻⁶ K⁻¹+1.7(2)×10⁻⁹ΔT K⁻² and α₃=9.344(5)×10⁻⁶ K⁻¹. The expansion-mechanisms of the three compounds are explained in terms of structural trends obtained from Rietveld refinements of the crystal structures of the compounds against the powder diffraction patterns. No structural phase transitions have been observed. While gehlenite behaves like a ’proper’ layer structure, the aluminates show increased framework structure behaviour. This is most probably explained by stronger coulombic interactions between the tetrahedral conformation and the layer-bridging cations due to the coupled substitution (Ca²⁺+Si⁴⁺)-(Ln ³⁺+Al³⁺) in the melilite-type structure. Electronic Supplementary Material Supplementary material is available for this article at     

High-temperature thermal expansion of lime, periclase, corundum and spinel

The high-temperature cell parameters of lime (CaO), periclase (MgO), corundum (Al₂O₃), and spinel (MgAl₂O₄) have been determined from 300 up to 3000 K through X-ray diffraction experiments with synchrotron radiation. The good agreement found with dilatometric results suggests that vacancy-type defects do not make a large contribution to thermal expansion for these oxides, even near the melting point, justifying the use of X-ray diffraction for determining volume properties up to very high temperatures. Thermal expansion coefficients were determined from the measured cell volumes with equations of the form α=α₀ + α₁ T + α₂/T ². Along with available isobaric heat capacity and compressibility data, these derived coefficients clearly show that anharmonic effects contribute little to the isochoric heat capacities (C _v ) of CaO, MgO, and Al₂O₃, which do not depart appreciably from the 3nR Dulong and Petit limit. Received: 31 March 1999 / Revised, accepted: 23 June 1999     

X-ray powder diffraction study on the modulated high temperature forms of SiO2 tridymite between 110 and 220 °C

 The crystal structure of intermediate incommensurate tridymite was refined at 150 °C from powder data. Upon cooling from above 220 °C, the basic structure with space group symmetry C222₁ is gradually distorted from orthorhombic to monoclinic symmetry. With decreasing temperature, the monoclinic angle γ smoothly opens up to 90.3°, while a displacive modulation with temperature-dependent wavelength develops. The 3 + 1 dimensional superspace group of the incommensurate phase is C112₁(αβ0). The modulation mainly consists of two sinusoidal transverse displacement waves for the silicon atoms coupled to rotations of the rigid SiO_4/2 tetrahedra. The wave vector is r=0.1192(1)a* − 0.0043(1)b* at 150 °C. Below 150 °C tridymite discontinuously transforms to another orthorhombic phase and the modulation partially locks in at the wave vector r ₁=1/3a*. Simultaneously, an additional incommensurate modulation with r ₂= 0.0395(1)b* − 0.3882(1)c* is formed. The two-dimensional modulation does not vary significantly with the temperature. Received: 13 September 2000 / Accepted: 29 January 2001     

Thermal expansion and decomposition of jarosite: a high-temperature neutron diffraction study

The structure of deuterated jarosite, KFe₃(SO₄)₂(OD)₆, was investigated using time-of-flight neutron diffraction up to its dehydroxylation temperature. Rietveld analysis reveals that with increasing temperature, its c dimension expands at a rate ~10 times greater than that for a. This anisotropy of thermal expansion is due to rapid increase in the thickness of the (001) sheet of [Fe(O,OH)₆] octahedra and [SO₄] tetrahedra with increasing temperature. Fitting of the measured cell volumes yields a coefficient of thermal expansion, α = α₀ + α₁ T, where α₀ = 1.01 × 10⁻⁴ K⁻¹ and α₁ = −1.15 × 10⁻⁷ K⁻². On heating, the hydrogen bonds, O1···D–O3, through which the (001) octahedral–tetrahedral sheets are held together, become weakened, as reflected by an increase in the D···O1 distance and a concomitant decrease in the O3–D distance with increasing temperature. On further heating to 575 K, jarosite starts to decompose into nanocrystalline yavapaiite and hematite (as well as water vapor), a direct result of the breaking of the hydrogen bonds that hold the jarosite structure together.     

Temperature evolution between 50 K and 320 K of the thermal expansion tensor of gypsum derived from neutron powder diffraction data

The unit cell parameters, extracted from Rietveld analysis of neutron powder diffraction data collected between 4.2 K and 320 K, have been used to calculate the temperature evolution of the thermal expansion tensor for gypsum for 50 ≤ T ≤ 320 K. At 300 K the magnitudes of the principal axes are α ₁₁  = 1.2(6) × 10⁻⁶ K⁻¹, α ₂₂  = 36.82(1) × 10⁻⁶ K⁻¹ and α ₃₃  = 25.1(5) × 10⁻⁶ K⁻¹. The maximum axis, α ₂₂ , is parallel to b, and using Institution of Radio Engineers (IRE) convention for the tensor orthonormal basis, the axes α ₁₁ and α ₃₃ have directions equal to (−0.979, 0, 0.201) and (0.201, 0, 0.979) respectively. The orientation and temperature dependent behaviour of the thermal expansion tensor is related to the crystal structure in the I2/a setting. Received 12 February 1998 / Revised, accepted 19 October 1998     

The crystal structure of arsentsumebite, Pb2Cu[(As, S)O4]2(OH)

Summary The crystal structure of arsentsumebite, ideally, Pb₂Cu[(As, S)O₄]₂(OH), monoclinic, space group P2₁/m, a = 7.804(8), b = 5.890(6), c = 8.964(8) ?, β = 112.29(6)°, V = 381.2 ?³, Z = 2, d_calc. = 6.481 has been refined to R = 0.053 for 898 unique reflections with I> 2σ(I). Arsentsumebite belongs to the brackebuschite group of lead minerals with the general formula Pb₂ Me(XO₄)₂(Z) where Me = Cu²⁺, Mn²⁺, Zn²⁺, Fe²⁺, Fe³⁺; X = S, Cr, V, As, P; Z = OH, H₂O. Members of this group include tsumebite, Pb₂Cu(SO₄)(PO₄)(OH), vauquelinite, Pb₂Cu(CrO₄)(PO₄)(OH), brackebuschite, Pb₂ (Mn, Fe)(VO₄)₂(OH), arsenbracke buschite, Pb₂(Fe, Zn)(AsO₄)₂(OH, H₂O), fornacite, Pb₂Cu(AsO₄)(CrO₄)(OH), and feinglosite, Pb₂(Zn, Fe)[(As, S)O₄]₂(H₂O). Arsentsumebite and all other group members contain M = M–T chains where M = M means edge-sharing between MO₆ octahedra and M–T represents corner sharing between octahedra and XO₄ tetrahedra. A structural relationship exists to tsumcorite, Pb(Zn, Fe)₂(AsO₄)₂ (OH, H₂O)₂ and tsumcorite-group minerals Me(1)Me(2)₂(XO₄)₂(OH, H₂O)₂. Received June 24, 2000; revised version accepted February 8, 2001     

New thermoelastic parameters of natural <Emphasis Type="Italic">C</Emphasis>2/<Emphasis Type="Italic">c</Emphasis> omphacite

The compressibility at room temperature and the thermal expansion at room pressure of two disordered crystals (space group C2/c) obtained by annealing a natural omphacite sample (space group P2/n) of composition close to Jd₅₆Di₄₄ and Jd₅₅Di₄₅, respectively, have been studied by single-crystal X-ray diffraction. Using a Birch–Murnaghan equation of state truncated at the third order [BM3-EoS], we have obtained the following coefficients: V ₀ = 421.04(7) Å³, K _T0 = 119(2) GPa, K′ = 5.7(6). A parameterized form of the BM3 EoS was used to determine the axial moduli of a, b and c. The anisotropy scheme is β _c  ≤ β _a  ≤ β _b , with an anisotropy ratio 1.05:1.00:1.07. A fitting of the lattice variation as a function of temperature, allowing for linear dependency of the thermal expansion coefficient on the temperature, yielded α_V(1bar,303K) = 2.64(2) × 10⁻⁵ K⁻¹ and an axial thermal expansion anisotropy of α _b  ≫ α _a  > α _c . Comparison of our results with available data on compressibility and thermal expansion shows that while a reasonable ideal behaviour can be proposed for the compressibility of clinopyroxenes in the jadeite–diopside binary join [K _T0 as a function of Jd molar %: K _T0 = 106(1) GPa + 0.28(2) × Jd_(mol%)], the available data have not sufficient quality to extract the behaviour of thermal expansion for the same binary join in terms of composition.     

Kristiansenite, a new calcium–scandium–tin sorosilicate from granite pegmatite in Tørdal, Telemark, Norway

Summary Kristiansenite occurs as a late hydrothermal mineral in vugs in an amazonite pegmatite at Heftetjern, T?rdal, Telemark, Norway. Tapering crystals, rarely up to 2 mm long, are colourless, white, or slightly yellowish. The mineral has the ideal composition Ca₂ScSn(Si₂O₇)(Si₂O₆OH) and is triclinic C1 with cell parameters a = 10.028(1), b = 8.408(1), c = 13.339(2) ?, α = 90.01(1), β = 109.10(1), γ = 90.00(1)°, V = 1062.7(3) ?³ (Z = 4). It has a monoclinic cell within ∼ 0.1 ? and is polysynthetically twinned on {010} by metric merohedry. The strongest reflections in the X-ray powder pattern are [d in ?, (I _obs), (hkl)]: 5.18 (53) (1–11), 3.146 (100) (004), 3.089 (63) (−222), 2.901 (19) (221), 2.595 (34) (222), 2.142 (17) (−3–31). The Mohs’ hardness is 5?–6; D_calc. = 3.64 g/cm³; only a mean refractive index of 1.74 could be measured. Scandium enrichment in the Heftetjern pegmatite and the crystal chemistry of scandium are briefly discussed. Received April 30, 2001; accepted July 28, 2001     

Effect of pressure on the thermal expansion of MgO up to 8.2 GPa

Isobaric volume measurements for MgO were carried out at 2.6, 5.4, and 8.2 GPa in the temperature range 300–1073 K using a DIA-type, large-volume apparatus in conjunction with synchrotron X-ray powder diffraction. Linear fit of the thermal expansion data over the experimental pressure range yields the pressure derivative, (∂α/∂P) _T , of −1.04(8) × 10⁻⁶ GPa⁻¹ K⁻¹ and the mean zero-pressure thermal expansion α_{0, T}  = 4.09(6) × 10⁻⁵ K⁻¹. The α_{0, T} value is in good agreement with results of Suzuki (1975) and Utsumi et al. (1998) over the same temperature range, whereas (∂α/∂P) _T is determined for the first time on MgO by direct measurements. The cross-derivative (∂α²/∂P∂T) cannot be resolved because of large uncertainties associated with the temperature derivative of α at all pressures. The temperature derivative of the bulk modulus, (∂K _T/∂T) _P , of −0.025(3) GPa K⁻¹, obtained from the measured (∂α/∂P) _T value, is in accord with previous findings. Received: 2 April 1999 / Revised, accepted: 22 June 1999     

Crystal structure and chemical formula of schmiederite,Pb2Cu2(OH)4(SeO3)(SeO4), with a comparison to linarite,PbCu(OH)2(SO4)

Summary Based on a X-ray structure analysis it was proved that the mineral schmiederite contains both selenite and selenate groups [a = 9.922(3)Å,b = 5.712(2)Å,c = 9.396(3)Å, = 101.96(3)°, space group P2₁/m,Z = 2 {Pb₂Cu₂(OH)₄(SeO₃)(SeO₄)},R _w = 0.055 for 1131 reflections up to sin / = 0.65 Å^–1]. The crystal structure is closely related to that of linarite [a = 9.701(2) Å,b = 5.650(2) Å,c= 4.690(2)Å, = 102.65(2)°, space group P2₁/m,Z = 2 {PbCu(OH)₂(SO₄)},R _w = 0.034 for 1991 reflections up to sin / = 1.0 Å^–1].The Pb atom in linarite and the Pb(1) atom in schmiederite have each three Pb-O bonds < 2.45 Å with trigonal pyramidal arranged ligands; the Pb(2) atom in schmiederite has only one such near O atom. The Cu atoms are approximately square planar coordinated by hydroxil groups. In addition two further O atoms complete the coordination figure to a strongly distorted octahedron. All the anion groups have the usual geometry.

---

Kristallstruktur und chemische Formel von Schmiederit, Pb₂Cu₂(OH)₄(SeO₃)(SeO₄), mit einem Vergleich zu Linarit, PbCu(OH)₂(SO₄)

Zusammenfassung Basierend auf einer Röntgen-Strukturuntersuchung konnte das Vorliegen von Selenit-und Selenatgruppen im Mineral Schmiederit belegt werden [a=9,922(3) Å,b = 5,712(2) Å,c = 9,396(3) Å, = 101,96(3)°, Raumgruppe P2₁/m,Z=2 {Pb₂Cu₂(OH)₄(SeO₃)(SeO₄)},R _w = 0,055 für 1131 Reflexe bis sin /, = 0,65 Å^–1]. Die Kristallstruktur weist enge Beziehungen zu jener des Linarits auf [a = 9,701(2) Å,b = 5,650(2) Å,c = 4,690(2) Å, = 102,65(2)°, Raumgruppe P2₁/m,Z=2 {PbCu(OH)₂(SO₄)},R _w = 0,034 für 1991 Reflexe bis sin / = 1,0 Å^–1].Das Pb-Atom im Linarit sowie das Pb(1)-Atom im Schmiederit haben jeweils drei Pb-O-Bindungen <,45 Å, wobei die Liganden trigonal pyramidal angeordnet sind; das Pb(2)-Atom im Schmiederit hat hingegen nur ein derart nahes O-Atom. Die Cu-Atome sind etwa quatratisch planar von Hydroxilgruppen koordiniert; zwei weitere O-Atome ergänzen die Koordinationsfigur zur einem stark verzerrten Oktaeder. Die Aniongruppen haben die üblichen Dimensionen.

     

Determination of cation distribution in (Co,Ni,Zn)2SiO4 olivine by synchrotron X-ray diffraction

 The cation distribution of Co, Ni, and Zn between the M1 and M2 sites of a synthetic olivine was determined with a single-crystal diffraction method. The crystal data are (Co_0.377Ni_0.396Zn_0.227)₂SiO₄, M _r  = 212.692, orthorhombic, Pbnm, a = 475.64(3), b = 1022.83(8), and c = 596.96(6) pm, V = 0.2904(1) nm³, Z = 4, D _x  = 4.864 g cm⁻³, and F(0 0 0) = 408.62. Lattice, positional, and thermal parameters were determined with MoKα radiation; R = 0.025 for 1487 symmetry-independent reflections with F > 4σ(F). The site occupancies of Co, Ni, and Zn were determined with synchrotron radiation employing the anomalous dispersion effect of Co and Ni. The synchrotron radiation data include two sets of intensity data collected at 161.57 and 149.81 pm, which are about 1 pm longer than Co and Ni absorption edges, respectively. The R value was 0.022 for Co K edge data with 174 independent reflections, and 0.034 for Ni K edge data with 169 reflections. The occupancies are 0.334Co + 0.539Ni + 0.127Zn in the M1 sites, and 0.420Co + 0.253Ni + 0.327Zn in the M2 sites. The compilation of the cation distributions in olivines shows that the distributions depend on ionic radii and electronegativities of constituent cations, and that the partition coefficient can be estimated from the equation: ln [(A/B)_M1/(A/B)_M2] = −0.272 (IR _A -IR _B ) + 3.65 (EN _A −EN _B ), where IR (pm) and EN are ionic radius and electronegativity, respectively. Received: 8 April 1999 / Revised, accepted: 7 September 1999     

High temperature single crystal X-ray diffraction studies of the ortho-proto phase transition in enstatite,Mg2Si2O6 at 1360 K

A high temperature single-crystal X-ray diffraction study of enstatite, Mg₂Si₂O₆ was undertaken at 296, 900, 1200, 1360 and 1400 K. During the X-ray data collection at 1360 K (T₀), orthoenstatite (Pbca) transformed to protoenstatite (Pbcn). The unit cell parameters measured at T₀ are a=18.456(4), b=8.960(2) and c=5.270(1) Å for ortho and a=9.306(1), b=8.886(1) and c=5.360(1) Å for proto. The discontinuous increase in c and decrease in b due to the ortho to proto transformation are associated with the drastic unkinking of the silicate chains, whereas the abrupt increase in a results from the large expansion of the M2 — O distances along a coupled with the increase in the out-of-plane tilting of the silicate tetrahedra. Stacking faults form in ortho prior to the phase transition, as well as in proto between 1360 and 1400 K. With increasing temperature, the silicate B chain in ortho straightens faster than the A chain as the configurations of the SiA and SiB tetrahedra tend to become similar. At T₀, the A and B chains with the O3-O3-O3 angles (O3 being the bridging oxygen atom) of 163.0° and 149.5° in ortho, respectively, attain an identical angle of 168.4° in proto. The configuration of the silicate chain in proto resembles that of the A chain in ortho. Rigid-body thermal vibration analysis suggests that between 1200 and 1400 K the largest, the second largest and the smallest thermal librational motions of the [SiO₄] tetrahedra in both ortho and proto are approximately around a, c and b, respectively. Below 1200 K, the largest thermal librational amplitudes of the SiA and SiB tetrahedra in ortho are quite different, but become nearly equivalent at T₀. In contrast to the results reported for all iron-bearing orthopyroxenes at high temperature, switching of the O3B atoms coordinated with the M2 cation occurs during the ortho to proto transformation, but not in ortho below T₀. The ortho-proto transition does not affect the configuration of the M1 octahedron significantly, but results in a decrease of the mean M2 — O bond distance by 0.043 Å and a highly distorted M2 octahedron in proto.     

Thermoelastic properties of the high-pressure phase of SnO2 determined by in situ X-ray observations up to 30 GPa and 1400 K

 In situ synchrotron X-ray experiments in the system SnO₂ were made at pressures of 4–29 GPa and temperatures of 300–1400 K using sintered diamond anvils in a 6–8 type high-pressure apparatus. Orthorhombic phase (α-PbO₂ structure) underwent a transition to a cubic phase (Pa3ˉ structure) at 18 GPa. This transition was observed at significantly lower pressures in DAC experiments. We obtained the isothermal bulk modulus of cubic phase K ₀= 252(28) GPa and its pressure derivative K ^′=3.5(2.2). The thermal expansion coefficient of cubic phase at 25 GPa up to 1300 K was determined from interpolation of the P-V-T data obtained, and is 1.7(±0.7) × 10⁻⁵ K⁻¹ at 25 GPa. Received: 7 December 1999 / Accepted: 27 April 2000     

Batiferrite, Ba[Ti2Fe10]O19, a new ferrimagnetic magnetoplumbite-type mineral from the Quaternary volcanic rocks of the western Eifel area, Germany

Summary Batiferrite, ideally Ba[Ti₂Fe₁₀]O₁₉, was found in the Quaternary volcanic rocks near üdersdorf, Graulai, and Altburg, western Eifel area, Germany. The new mineral typically occurs as euhedral platy grains in cavities of melilite- and leucite-nephelinite basalts. Associated minerals are hematite, magnetite, titanite, g?tzenite, clinopyroxene, nepheline, and biotite. It exhibits a hexagonal tabular habit flattened on {0001}, diameter 0.5–1 mm, thickness 20–125 μm, and {10&1macr;3}, {10&1macr;0} as observable forms. The mineral is opaque, of black color with submetallic lustre, and shows a ferrimagnetic behavior. VHN₅₀ is 793 with a range of 710–841 from ten indentations. The quantitative reflectance measurements of R_o/R_e on oriented grains in air and oil immersion, respectively, are [%]: for 470 nm 22.1/20.1 and 8.4/7.1, for 546 nm 21.0/19.4 and 7.8/6.6, for 589 nm 20.2/18.8 and 7.4/6.3, and for 650 nm 19.3/18.3 and 6.8/5.9. The bireflectance is distinct (air) to weak (oil), and parallel (0001) a moderate anisotropy with straight extinction can be observed. Typical microprobe analyses give [wt%] K₂O 0.28–0.33, Na₂O 0.17–0.20, SrO 0.46–0.55, BaO 11.80–12.17, MgO 1.27–1.47, Al₂O₃ 0.31–0.33, TiO₂ 13.11–13.63, MnO 2.38–2.57, Fe₂O₃ 61.36–63.12, FeO 5.49–5.86 (Fe³⁺/Fe²⁺ calculated for charge compensation), which is equivalent to (Ba_0.84Na_0.06K_0.06Sr_0.05)_1.01(Fe_8.48 ³⁺Fe_0.86 ²⁺Ti_1.82Mg_0.37Mn_0.37Al_0.06)_11.96O₁₉ as the average composition based on 19 oxygen atoms. Batiferrite is a magnetoplumbite-type mineral with hexagonal symmetry, space group P6 ₃ /mmc (no. 194), a = 5.909(1) ?, c = 23.369(4) ?, V = 706.6(2) ?³, Z = 2, and a calculated density of 5.016 gcm⁻³. The structure was refined to R1 = 0.031 for 278 unique reflections with F_o ² > 4σ (F_o ²) and R1 = 0.079 for all 452 unique observations using single crystal X-ray data. The strongest reflections of the X-ray powder diffraction pattern are [d _obs, I/I_o, (hkl)]: 2.631, 100, (114); 2.799, 80, (107); 1.478, 70, (220); 2.429, 60, (203); 1.672, 50, (217). The new mineral is comparable to the other Ba containing magnetoplumbite-type minerals haggertyite and hawthorneite, the iron content, however, is much higher and in the range of magnetoplumbite. The large cation site (A) is dominated by Ba, and four of the five remaining crystallographic cation sites in the structure are dominated by Fe (M1, 2, 3, 5), the octahedrally coordinated M4-site is dominated by Ti. No oxygen vacancy on the O3-site like in plumboferrite can be observed. Batiferrite is named for its main chemical composition and the relationship to the M-type hexaferrites (polytype 5H).

---

Zusammenfassung Batiferrit, ein neues ferrimagnetisches Mineral des Magnetoplumbit-Typs aus den quart?ren Vulkaniten der West-Eifel, Deutschland Das neue Mineral Batiferrite, mit der Idealformel Ba[Ti₂Fe₁₀]O₁₉, wurde an drei Fundpunkten in den Quart?ren Vulkangesteinen der westlichen Eifel, Deutschland, in der N?he von üdersdorf, Graulai und Altburg gefunden. Das neue Mineral tritt typischerweise bl?ttchenf?rmig in kleinen Hohlr?umen von Melilith- und Leucit-Nephelininit Basalten auf. Vergesellschaftete Minerale sind H?matit, Magnetit, Titanit, G?tzenit, Klinopyroxen, Nephelin und Biotit. Der Habitus ist hexagonal tafelig nach {0001}, mit einem Durchmesser von 0.5–1 mm und einer Dicke von 20–125 μm, zus?tzlich k?nnen die Formen {10&1macr;3} und {10&1macr;0} beobachtet werden. Das Mineral ist opak, hat eine schwarze Farbe mit einem leicht metallischen Glanz, und ist ferromagnetisch. Die H?rte VHN₅₀ ist 793 mit einem Bereich von 710–841 aus 10 Eindruckbestimmungen. Die quantitativen Reflexionsmessungen von R_o/R_e an orientierten K?rnern in Luft beziehungsweise ?limmersion, ergaben [%]: für 470 nm 22.1/20.1 und 8.4/7.1, für 546 nm 21.0/19.4 und 7.8/6.6, für 589 nm 20.2/18.8 und 7.4/6.3, und für 650 nm 19.3/18.3 und 6.8/5.9. Die Bireflexion ist deutlich (Luft) bis schwach (?l) und parallel (0001) kann eine mittlere Anisotropie mit gerader Ausl?schung beobachtet werden. Eine typische Mikrosondenanalyse ergibt [wt%] K₂O 0.28–0.33, Na₂O 0.17–0.20, SrO 0.46–0.55, BaO 11.80–12.17, MgO 1.27–1.47, Al₂O₃ 0.31–0.33, TiO₂ 13.11–13.63, MnO 2.38–2.57, Fe₂O₃ 61.36–63.12, FeO 5.49–5.86 (Fe³⁺/Fe²⁺ berechnet zum Ladungsausgleich), die mittlere chemische Formel auf der Basis von 19 Sauerstoffatomen lautet (Ba_0.84Na_0.06K_0.06Sr_0.05)_1.01 (Fe_8.48 ³⁺Fe_0.86 ²⁺Ti_1.82Mg_0.37Mn_0.37Al_0.06)_11.96O ₁₉. Batiferrit ist ein Mineral der Magnetoplumbitgruppe, hat hexagonale Symmetrie mit der Raumgruppe P6₃/mmc (Nr. 194), a = 5.909(1) ?, c = 23.369(4) ?, V = 706.6(2) ?³, Z = 2, und einer berechneten Dichte von 5.016 gcm⁻³. Die Struktur wurde aus Einkristall-R?ntgendaten bis zu einem R1-Wert von 0.031 für 278 F_o ² > 4σ(F_o ²), und einem R1-Wert von 0.079 für alle 452 F_o ² verfeinert. Die st?rksten Beugungsreflexe der Pulver-R?ntgendaten sind [d_obs, I/I_o, (hkl)]: 2.631, 100, (114); 2.799, 80, (107); 1.478, 70, (220); 2.429, 60, (203); 1.672, 50, (217). Das neue Mineral weist deutliche ?hnlichkeiten zu den anderen beiden Ba-reichen Mineralen Haggertyit und Hawthorneit der Magnetoplumbit-Gruppe auf, jedoch ist der Eisengehalt wesentlich h?her und im Bereich des Minerals Magnetoplumbit. Der gro?e Kationenplatz (A) ist von Barium dominiert, vier (M1, 2, 3, 5) der restlichen fünf kristallographischen Kationenpl?tze in der Struktur sind fast ausschlie?lich mit Fe, die oktaedrisch koordinierte M4-Position ist überwiegend mit Ti besetzt. An der O3-Position konnte kein Sauerstoffdefizit wie in Plumboferrit festgestellt werden. Batiferrit ist nach seiner chemischen Beschaffenheit und nach seiner Zugeh?hrigkeit zu den M-Typ Hexaferriten (Polytyp 5H) benannt.

---

---

Received December 14, 1999; accepted March 2, 2000     

Extraction and distribution of soil organic and inorganic selenium in coal mine environments of Wyoming, USA

 Selenium (Se), an animal toxicant and aquifer contaminant, occurs in coal mine environments of Wyoming. There is a paucity of information on solution-phase Se speciation in mine soils. The objectives of this study were to compare Se extraction efficiencies of various reagents and to characterize SeO^2– ₃ (selenite), SeO^2– ₄ (selenate) and organic Se components in these extracts. Forty coal mine soils were extracted using DI (deionized) water, hot water (0.1% CaCl₂), AB-DTPA, NaOH, and KH₂PO₄. Each solution was analyzed for total dissolved Se, and inorganic and organic Se fractions. Both inorganic and organic Se fractions were detected in the soil extracts. The order of Se (total, inorganic, and organic) extraction efficiency for different reagents was DI water < hot water < AB-DTPA < NaOH < KH₂PO₄. The inorganic–organic Se ratios in DI water, hot water, AB-DTPA, NaOH, and KH₂PO₄ extracts were 60 : 40, 26 : 74, 61 : 39, 87 : 13, and 52 : 48, respectively, indicating predominance of inorganic Se in all but the hot water extract. Selenite was the dominant inorganic species in AB-DTPA and KH₂PO₄ extracts, while SeO^2– ₄ was the major Se species in the DI water, hot water, and NaOH extracts. Significant correlations (P<0.01) were observed among extractable inorganic Se [NaOH and KH₂PO₄ (r=0.95); hot water and AB-DTPA (r=0.89)], total soluble Se [DI water with hot water (r=0.98) and AB-DTPA (r=0.95)], and Se species [SeO^2– ₃ in AB-DTPA with SeO^2– ₄ in NaOH (r=0.94) and SeO^2– ₃ in KH₂PO₄ (r=0.88)]. These correlations are indicative of Se extraction efficiency, thermodynamically predicted chemical transformations (such as oxidation of SeO^2– ₃ to SeO^2– ₄), and probable interconversions between the organic and inorganic Se fractions (r=0.70 in KH₂PO₄ extracts); as a whole the correlations can be used as statistical validations of possible geochemical processes. Received: 21 August 1995 · Accepted: 16 October 1995     

Crystal chemistry of selenates with mineral-like structures: VII. The structure of (H<Subscript>3</Subscript>O)[(UO<Subscript>2</Subscript>)(SeO<Subscript>4</Subscript>)(SeO<Subscript>2</Subscript>OH)] and some structural features of selenite-selenates

The crystal structure of a new compound, (H₃O)[(UO₂)(SeO₄)(SeO₂OH)] (monoclinic, P2₁/n, a = 8.6682(19), b = 10.6545(16), c = 9.846(2) Å, β = 97.881(17)°, V = 900.7(3) ų), was solved by direct methods and refined to R ₁ = 0.050. The structure contains two symmetrically different Se atoms. The Se1 site is coordinated by three O atoms as is characteristic of Se⁴⁺ cations. The Se2 site is coordinated by four O atoms and forms selenate anion SeO ₄ ^2? . The structure is based on selenite-selenate sheets [(UO₂)(SeO₄)(SeO₂OH)]^? linked by the interlayer H₃O^? ions. The sheets are parallel to (101). The structure is compared to that of schmiederite, Pb₂Cu₂(SeO₃)(SeO₄)(OH)₄.