Fluid evolution in base‐metal sulphide mineral deposits in the metamorphic basement rocks of southwest Scotland and Northern Ireland

The Dalradian and Ordovician–Silurian metamorphic basement rocks of southwest Scotland and Northern Ireland host a number of base‐metal sulphide‐bearing vein deposits associated with kilometre‐scale fracture systems. Fluid inclusion microthermometric analysis reveals two distinct fluid types are present at more than half of these deposits. The first is an H₂O–CO₂–salt fluid, which was probably derived from devolatilization reactions during Caledonian metamorphism. This stage of mineralization in Dalradian rocks was associated with base‐metal deposition and occurred at temperatures between 220 and 360°C and pressures of between 1.6 and 1.9 kbar. Caledonian mineralization in Ordovician–Silurian metamorphic rocks occurred at temperatures between 300 and 360°C and pressures between 0.6 and 1.9 kbar. A later, probably Carboniferous, stage of mineralization was associated with base‐metal sulphide deposition and involved a low to moderate temperature (T_h 70 to 240°C), low to moderate salinity (0 to 20 wt% NaCl eq.), H₂O–salt fluid. The presence of both fluids at many of the deposits shows that the fractures hosting the deposits acted as long‐term controls for fluid migration and the location of Caledonian metalliferous fluids as well as Carboniferous metalliferous fluids. Copyright © 2004 John Wiley & Sons, Ltd.     

Genesis of massive sulfide deposits in the Verkhneural’sk ore district, the South Urals, Russia: Evidence for magmatic contribution of metals and fluids

Melt inclusions and aqueous fluid inclusions in quartz phenocrysts from host felsic volcanics, as well as fluid inclusions in minerals of ores and wall rocks were studied at the Cu-Zn massive sulfide deposits in the Verkhneural’sk ore district, the South Urals. The high-temperature (850–1210°C) magmatic melts of volcanic rocks are normal in alkalinity and correspond to rhyolites of the tholeiitic series. The groups of predominant K-Na-type (K₂O/Na₂O = 0.3–1.0), less abundant Na-type (K₂O/Na₂O = 0.15–0.3), and K-type (K₂O/Na₂O = 1.9–9.3) rhyolites are distinguished. The average concentrations (wt %) of volatile components in the melts are as follows: 2.9 H₂O (up to 6.5), 0.13 Cl (up to 0.28), and 0.09 F (up to 0.42). When quartz was crystallizing, the melt was heterogeneous, contained magnetite crystals and sulfide globules (pyrrhotite, pentlandite, chalcopyrite, bornite). High-density aqueous fluid inclusions, which were identified for the first time in quartz phenocrysts from felsic volcanics of the South Urals, provide evidence for real participation of magmatic water in hydrothermal ore formation. The fluids were homogenized at 124–245°C in the liquid phase; the salinity of the aqueous solution is 1.2–6.2 wt % NaCl equiv. The calculated fluid pressure is very high: 7.0–8.7 kbar at 850°C and 5.1–6.8 kbar at 700°C. The LA-ICP-MS analysis of melt and aqueous fluid inclusions in quartz phenocrysts shows a high saturation of primary magmatic fluid and melt with metals. This indicates ore potential of island-arc volcanic complexes spatially associated with massive sulfide deposits. The systematic study of fluid inclusions in minerals of ores and wall rocks at five massive sulfide deposits of the Verkhneural’sk district furnished evidence that ore-forming fluids had temperature of 375–115°C, pressure up to 1.0–0.5 kbar, chloride composition, and salinity of 0.8–11.2 (occasionally up to 22.8) wt % NaCl equiv. The H and O isotopic compositions of sericite from host metasomatic rocks suggest a substantial contribution of seawater to the composition of mineral-forming fluids. The role of magmatic water increases in the central zones of the feeding conduit and with depth. The dual nature of fluids with the prevalence of their magmatic source is supported by S, C, O, and Sr isotopic compositions. The TC parameters of the formation of massive sulfide deposits are consistent with the data on fluid inclusions from contemporary sulfide mounds on the oceanic bottom.     

Sulfur isotope and fluid inclusion geochemistry of metamorphic Cu–Au vein deposits,central Cobar area,NSW, Australia

Vein-type, structurally controlled Cu–Au mineralisation hosted by turbidites of late Silurian to earliest Devonian age, forms an important resource close to the eastern margin of the Cobar Basin. Here we report 103 new sulfur isotope analyses, together with homogenisation temperatures and salinity data for 545 primary two-phase fluid inclusions for the mineralised zones from the central area of the Cobar mining district. A range in δ³⁴S values from 3.8 to 11.2‰ (average 7.9‰) is present. Sulfur is likely to have been derived from rock sulfur/sulfide in basin and basement rocks, but there may be an additional connate-derived component. Homogenisation temperatures (T_h) for inclusion fluids trapped in quartz and minor calcite veins range from near 150°C to 397°C. Fluid inclusions are characterised by a low CO₂ content and low, but variable salinities (2.1–9.1 wt% NaCl equivalent). Generations of inclusion fluids correspond to six paragenetic stages of vein quartz deposition and recrystallisation at the Chesney mine. Primary fluid inclusions in the first two stages were subjected to re-equilibration resulting from increased confining pressure. Their T_h range (151–317°C) is considered a minimum for the temperature of these fluids. Sulfide and gold deposition at Chesney appears to be related to fluids of moderately high T_h (range 270–397°C) associated with the final paragenetic stage. T_h for the ore-related fluids may be close to the solvus of the H₂O–NaCl–CO₂ system and hence near trapping temperatures. Late-stage entry of a hot, moderately saline ore-forming fluid is implicated as the origin of the Cu–Au mineralisation. However, comparison with geochemical data for the vein-style Zn–Pb–Ag deposits at Cobar demonstrates that differences in metal content for individual zones cannot be attributed to major differences in fluid temperature or salinity. Rather, these differences are probably due to variations in source-rock reservoirs and structural pathways along which the ore-forming fluids moved.     

Retrogression by deep infiltration of meteoric fluids into thrust zones during late-orogenic rapid unroofing

Hypersaline (Na–Ca–Cl) fluids are associated with late‐stage quartz veining and retrogression of garnet, kyanite and other high P–T phases in the vicinity of thrusts and major lithological boundaries in the Scandian nappes of the Troms‐Ofoten region, northern Norway. They record early Devonian fluid infiltration during rapid exhumation in the final stages of Caledonian orogenesis. The δ¹⁸O and δD characteristics of these late fluids provide compelling evidence for deep circulation of meteoric fluids. The sub‐greenschist to low greenschist facies retrogression (P=2±1 kbar; T =300–350 °C) suggests infiltration to depths of 7–9 km in a regime of supra‐hydrostatic fluid pressure. Peak metamorphic quartz veins and associated fluids have δD and δ¹⁸O characteristics consistent with a metamorphic origin (δD ?47 to ?75; δ¹⁸O+8.6 to +17.4). However, late quartz veins and associated fluids show a broad spread of δD from ?42 to ?148, interpreted in terms of meteoric fluid infiltration. Such negative δD values are only recorded in present‐day high‐latitude or high‐altitude settings, and since north Norway was in an equatorial setting (10° S) in the early Devonian, a high‐altitude origin is deduced. By calculation, and by comparison with modern examples, the early Devonian mountains of the north Norwegian Caledonides are interpreted to have had a topography in excess of 5 km. The deep circulation of surface waters is interpreted in terms of topographically driven flow, linked with a hydrothermal system induced by elevated geothermal gradients due to rapid uplift. Whilst the case for deep penetration of surface‐derived fluids has been promoted for Mesozoic and younger mountain belts, this study represents one of the first documented examples for a Palaeozoic orogenic belt. It suggests that many of the fundamental processes operating during the exhumation of mountain belts are similar irrespective of age.     

Genesis of the Ciemas Gold Deposit and Relationship with Epithermal Deposits in West Java, Indonesia: Constraints from Fluid Inclusions and Stable Isotopes

The Ciemas gold deposit is located in West Java of Indonesia,which is a Cenozoic magmatism belt resulting from the Indo-Australian plate subducting under the Eurasian plate.Two different volcanic rock belts and associated epithermal deposits are distributed in West Java:the younger late Miocene-Pliocene magmatic belt generated the Pliocene-Pleistocene epithermal deposits,while the older late Eocene-early Miocene magmatic belt generated the Miocene epithermal deposits.To constrain the physico-chemical conditions and the origin of the ore fluid in Ciemas,a detailed study of ore petrography,fluid inclusions,laser Raman spectroscopy,oxygen-hydrogen isotopes for quartz was conducted.The results show that hydrothermal pyrite and quartz are widespread,hydrothermal alteration is well developed,and that leaching structures such as vuggy rocks and extension structures such as comb quartz are common.Fluid inclusions in quartz are mainly liquid-rich two phase inclusions,with fluid compositions in the NaCl-H20 fluid system,and contain no or little CO_2.Their homogenization temperatures cluster around 240℃-320℃,the salinities lie in the range of 14-17 wt.%NaCl equiv,and the calculated fluid densities are 0.65-1.00 g/cm~3.The values of δ~(18)O_(H2O-VSMOW)for quartz range from +5.5‰ to +7.7‰,the δD_(VSMOW) of fluid inclusions in quartz ranges from-70‰ to-115‰.All of these data indicate that mixing of magmatic fluid with meteoric water resulted in the formation of the Ciemas deposit.A comparison among gold deposits of West Java suggests that Miocene epithermal ore deposits in the southernmost part of West Java were more affected by magmatic fluids and exhibit a higher degree of sulfldation than those of Pliocene-Pleistocene.     

Geology and Genesis of Orogenic Gold Deposits,Xiaoqinling District,Southeastern China

Orogenic gold vein deposits in the Xiaoqinling district are situated in a basement-cored uplift along the southern margin of the North China craton. The deposits are hosted by Late Archean to Paleoproterozoic amphibolite-facies country rocks, varying in lithology from clastic and chemical sedimentary units to felsic and mafic volcanic rocks and plutons. Absolute and relative age relationships indicate a late Mesozoic emplacement of the lodes, which is subsequent to the deformation associated with the Middle to Late Triassic Qinling orogen along the craton margin. All auriferous quartz veins are hosted in faults. The ores are generally composed of quartz veins with various amounts of pyrite, galena, chalcopyrite, sphalerite, and carbonates. Mineralization can be separated into three distinct stages.

Ore fluids are H₂O dominant, with approximately 20 to 30 and 10 to 20 mole% CO₂ for gold-bearing stage I and II veins, respectively. Vein formation pressures and temperatures were 2.2 kbar and 300 to 370°C for stage I and 1.6 kbar and 250 to 320°C for stage II. The narrow range of δ¹⁸O values for ore fluids from the deposits throughout the Xiaoqinling district indicate a common deep fluid source, most likely of magmatic origin. The ³⁴S data suggest sulfur originated from a magmatic fluid of approximately 2 ± 2%, with significant local sulfur contributions leading to large variations in the ore-stage sulfide minerals. The most probable mechanism for the deposition of gold is phase separation caused by the partial loss of volatiles such as CO₂ and CH₄.     

Fluid Inclusions and C?H?O?S?Pb Isotopes: Implications for the Genesis of the Zhuanshanzi Gold Deposit on the Northern Margin of the North China Craton

The Zhuanshanzi gold deposit lies in the eastern section of the Xingmeng orogenic belt and the northern section of the Chifeng‐Chaoyang gold belt. The gold veins are strictly controlled by a NW‐oriented shear fault zone. Quartz veins and altered tectonic rock‐type gold veins are the main vein types. The deposits can be divided into four mineralization stages, and the second and third metallogenic stages are the main metallogenic stages. In this paper, based on the detailed field geological surveys, an analysis of the orebody and ore characteristics, microtemperature measurement of fluid inclusions, the Laser Raman spectrum of the inclusions, determination of C? H? O? S? Pb isotopic geochemical characteristics, and so on were carried out to explore the origin of the ore‐forming fluids, ore‐forming materials, and the genesis of the deposits. The results show that the fluid inclusions can be divided into four types: type I – gas–liquid two‐phase inclusions; type II – gas‐rich inclusions; type III– liquid inclusions; and type IV – CO₂‐containing three‐phase inclusions. However, they are dominated by type Ib – gas liquid inclusions and type IV – three‐phase inclusions containing CO₂. The gas compositions are mainly H₂O and CO₂, indicating that the metallogenic system is a CO₂? H₂O? NaCl system. The homogenization temperature of the ore‐forming fluid evolved from a middle temperature to a low temperature, and the temperature of the fluid was further reduced due to meteoric water mixing during the late stage, as well as a lack of CO₂ components, and eventually evolved into a simple NaCl? H₂O hydrothermal system. C? H? O? S? Pb isotope research proved that the ore‐forming fluids are mainly magmatic water during the early stage, with abundant meteoric water mixed in during the late stage. Ore‐forming materials originated mostly from hypomagma and were possibly influenced by the surrounding rocks, suggesting that the ore‐forming materials were mainly magmatic hydrothermal deposits, with a small amount of crustal component. The fluid immiscibility and the CO₂ and CH₄ gases in the fluids played an active and important role in the precipitation and enrichment of Au during different metallogenic stages. The deposit is considered a magmatic hydrothermal deposit of middle–low temperature.     

Fluid inclusion evidence for an anticlockwise metamorphic P-T path in central Massachusetts

Acadian (Late Silurian to Early Devonian) metamorphism in the Central Maine Terrane (CMT) in central Massachusetts is characterized by an early low-P, high-T (Buchan-type) metamorphism followed by thickening at high temperature (>650d? C) and then by cooling to 100-200d? C below peak recorded temperatures before eventual unroofing. Mineralogical and textural evidence for this path includes sillimanite pseudomorphs after early andalusite, abundant cordierite in pelitic lithologies, replacement of low-P cordierite-bearing assemblages by high-P garnet-bearing assemblages, and recrystallization of mylonites associated with late shear zones to form lower-T and higher-P assemblages. Peak conditions in the highest grade rocks were 685-780d? C and 5-6 kbar; the cooling path passed through 550d? C at about 6.5 kbar. The well-constrained P-T path documented from geological and mineralogical evidence for the CMT offers an unusual opportunity to examine characteristics of fluid inclusions that have experienced a long-lived metamorphic event spanning a broad range of P-T conditions. Fluid inclusion data from the CMT document a range of fluid compositions (CO₂-rich, mixed CO₂-N₂-rich, N₂-rich and H₂O-rich) and densities during metamorphism. Densities of CO₂ fluid inclusions range from 0.20 to 1.03 g cm^-3. Medium-density CO₂ fluid inclusions are contained in quartz inclusions within garnets in partial melt leucosomes, and in quartz grains within migmatites. Fluid inclusions within the quartz inclusions indicate trapping conditions of 650-700d? C at pressures below 5 kbar. Other CO₂ fluid inclusions from matrix quartz yield isochores which pass through 700d? C and 5.2 kbar. The highest density inclusions associated with rocks containing the late high-P assemblages have isochores which pass below the estimated P-T conditions for recrystallization of the mylonite. Fluid inclusion evidence suggests an early low-P heating event, followed by thickening at high temperature, and then by nearly isobaric cooling to about 500d? C with later decompression. This interpretation is also consistent with previously published petrological models and supports an anticlockwise P-T path for the CMT of south-central Massachusetts.     

A Study of Ore-forming Fluids in the Shimensi Tungsten Deposit, Dahutang Tungsten Polymetallic Ore Field, Jiangxi Province, China

The Dahutang tungsten polymetallic ore field is located north of the Nanling W-Sn polymetallic metallogenic belt and south of the Middle—Lower Yangtze River Valley Cu-Mo-Au-Fe porphyry-skarn belt.It is a newly discovered ore field,and probably represents the largest tungsten mineralization district in the world.The Shimensi deposit is one of the mineral deposits in the Dahutang ore field,and is associated with Yanshanian granites intruding into a Neoproterozoic granodiorite batholith.On the basis of geologic studies,this paper presents new petrographic,microthermometric,laser Raman spectroscopic and hydrogen and oxygen isotopic studies of fluid inclusions from the Shimensi deposit.The results show that there are three types of fluid inclusions in quartz from various mineralization stages:liquid-rich two-phase fluid inclusions,vapor-rich two-phase fluid inclusions,and three-phase fluid inclusions containing a solid crystal,with the vast majority being liquid-rich two-phase fluid inclusions.In addition,melt and melt-fluid inclusions were also found in quartz from pegmatoid bodies in the margin of the Yanshanian intrusion.The homogenization temperatures of liquid-rich two-phase fluid inclusions in quartz range from 162 to 363℃ and salinities are 0.5wt%-9.5wt%NaCI equivalent.From the early to late mineralization stages,with the decreasing of the homogenization temperature,the salinity also shows a decreasing trend.The ore-forming fluids can be approximated by a NaCl-H_2O fluid system,with small amounts of volatile components including CO_2,CH_4 and N_2,as suggested by Laser Raman spectroscopic analyses.The hydrogen and oxygen isotope data show that δ5D_(V-smow) values of bulk fluid inclusions in quartz from various mineralization stages vary from-63.8‰ to-108.4‰,and the δ~(18)O_(H2O) values calculated from the δ~(18)O_(V-)smow values of quartz vary from-2.28‰ to 7.21‰.These H-O isotopic data are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water in the early stage,and meteoric water was added and participated in mineralization in the late stage.Integrating the geological characteristics and analytical data,we propose that the ore-forming fluids of the Shimensi deposit were mainly derived from Yanshanian granitic magma,the evolution of which resulted in highly differentiated melt,as recorded by melt and melt-fluid inclusions in pegmatoid quartz,and high concentrations of metals in the fluids.Cooling of the ore-forming fluids and mixing with meteoric water may be the key factors that led to mineralization in the Dahutang tungsten polymetallic ore field.     

Fluid evolution and thermal structure in the rapidly exhuming gneiss complex of Namche Barwa–Gyala Peri, eastern Himalayan syntaxis

High‐grade gneisses (amphibolite–granulite facies) of the Namche Barwa and Gyala Peri massifs, in the eastern Himalayan syntaxis, have been unroofed from metamorphic depths in the late Tertiary–Recent. Rapid exhumation (2–5 mm year^?1) has resulted in a pronounced shallow conductive thermal anomaly beneath the massifs and the intervening Tsangpo gorge. The position of the 300 °C isotherm has been estimated from fluid inclusions using CO₂–H₂O immiscibility phase equilibria to be between 2.5 and 6.2 km depth below surface. Hence, the near‐surface average thermal gradient exceeds 50 °C km^?1 beneath valleys, although the thermal gradient is relatively lower beneath the high mountains. The original metamorphic fluid in the gneisses was >90% CO₂. This fluid was displaced by incursion of brines from overlying marine sedimentary rocks that have since been largely removed by erosion. Brines can exceed 60 wt% dissolved salts, and include Ca, Na, K and Fe chlorides. These brines were remobilized during the earliest stages of uplift at >500 °C. During exhumation, incursion of abundant topography‐driven surface waters resulted in widespread fracture‐controlled hydrothermal activity and brine dilution down to the brittle–ductile transition. Boiling water was particularly common at shallow levels (<2.5 km) beneath the Yarlung Tsangpo valley, and numerous hot springs occur at the surface in this valley. Dry steam is not a major feature of the hydrothermal system in the eastern syntaxis (in contrast to the western syntaxis at Nanga Parbat), but some dry steam fluids may have developed locally.     

Fluid Inclusions and Hydrogen,Oxygen, and Lead Isotopes of the Antuoling Molybdenum Deposit,Northern Taihang Mountains,China

The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO₂–H₂O inclusions, and pure CO₂ inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO₂–H₂O to the NaCl–H₂O system. The δ¹⁸O_H2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (²⁰⁸Pb/²⁰⁴Pb, 36.320–37.428; ²⁰⁷Pb/²⁰⁴Pb, 15.210–15.495; ²⁰⁶Pb/²⁰⁴Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.     

Tectono-sedimentary evolution of active extensional basins controlling the deposition of the Middle Miocene Kareem Formation,southwestern Gulf of Suez,Egypt

The Naozhi Au–Cu deposit is located on the continental margin of Northeast China, forming part of the West Pacific porphyry–epithermal gold–copper metallogenic belt. In this paper, we systematically analyzed the compositions, homogenization temperatures, and salinity of fluid inclusions as well as their noble gas isotopic and Pb isotopic compositions from the deposit. These new data show that (1) five types of fluid inclusions were identified as pure gas inclusions (V-type), pure liquid inclusions (L-type), gas–liquid two-phase inclusions (W-type, as the main fluid inclusions (FIs)), CO₂-bearing inclusions (C-type), and daughter-mineral-bearing polyphase inclusions (S-type); (2) W-type FIs in quartz crystals of early, main, and late stage are homogenized at temperatures of 324.7–406.7, 230–338.8, and 154.6–308 °C, with salinities of 2.40–7.01 wt% NaCl_eq, 1.73–9.47 wt% NaCl_eq, and 6.29 wt% NaCl_eq, respectively. S-type FIs in quartz crystals of early stage are homogenized at temperatures of 328.6–400 °C, with salinities of 39.96–46.00 wt% NaCl_eq; (3) Raman analysis results reveal that the vapor compositions of early ore-forming fluids consisted of CO₂ and H₂O, with H₂O gradually increasing and CO₂ being absent at the late mineralization stage; (4) fluid inclusions in pyrite and chalcopyrite have ³He/⁴He ratios of 0.03–0.104 Ra, ²⁰Ne/²²Ne ratios of 9.817–9.960, and ⁴⁰Ar/³⁶Ar ratios of 324–349. These results indicate that the percentage of radiogenic ⁴⁰Ar* in fluid inclusions varies from 8.8 to 15.5 %, containing 84.5–91.2 % atmospheric ⁴⁰Ar; (5) the ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁶Pb/²⁰⁴Pb ratios of sulfides are 18.1822–18.3979, 15.5215–15.5998, and 38.1313–38.3786, respectively. These data combined with stable isotope data and the chronology of diagenesis and metallogenesis enable us suppose that the ore-forming fluids originated from the melting of the lower crust, caused by the subduction of an oceanic slab, whereas the mineralized fluids were exsolved from the late crystallization stage and subsequently contaminated by crustal materials/fluids during ascent, including meteoric water, and the mineral precipitation occurred at a shallow crustal level.

     

Fluid inclusion characteristics of mesothermal gold deposits in the Xiaoqinling district, Shaanxi and Henan Provinces, People's Republic of China

Fluid inclusions were studied in quartz samples from early (stage I) gold-poor quartz veins and later (stage II) gold- and sulphide-rich quartz veins from the Wenyu, Dongchuang, Qiangma, and Guijiayu mesothermal gold deposits in the Xiaoqinling district, China. Fluid inclusion petrography, microthermometry, and bulk gas analyses show remarkably consistent fluid composition in all studied deposits. Primary inclusions in quartz samples are dominated by mixed CO₂-H₂O inclusions, which have a wide range in CO₂ content and coexist with lesser primary CO₂-rich and aqueous inclusions. In addition, a few secondary aqueous inclusions are found along late-healed fractures. Microthermometry and bulk gas analyses suggest hydrothermal fluids with typically 15–30 mol% CO₂ in stage I inclusions and 10–20 mol% CO₂ in stage II inclusions. Estimates of fluid salinity decrease from 7.4–9.2 equivalent wt.% NaCl to 5.7–7.4 equivalent wt.% NaCl between stage I and II. Primary aqueous inclusions in both stages show consistent salinity with, but slightly lower Th _total than, their coexistent CO₂-H₂O inclusions. The coexisting CO₂-rich, CO₂-H₂O, and primary aqueous inclusions in both stage I and II quartz are interpreted to have been trapped during unmixing of a homogeneous CO₂-H₂O parent fluid. The homogenisation temperatures of the primary aqueous inclusions give an estimate of trapping temperature of the fluids. Trapping conditions are typically 300–370 °C and 2.2 kbar for stage I fluids and 250–320 °C and 1.6 kbar for stage II fluids. The CO₂-H₂O stage I and II fluids are probably from a magmatic source, most likely devolatilizing Cretaceous Yanshanian granitoids. The study demonstrates that gold is largely deposited as pressures and temperatures fall accompanying fluid immiscibility in stage II veins. Received: 15 May 1997 / Accepted: 10 June 1998     

Geology,Fluid Inclusion Characteristics and H–O–C Isotopes of Large Lijiagou Pegmatite Spodumene Deposit in Songpan–Garze Fold Belt,Eastern Tibet: Implications for ore Genesis

The large, newly discovered Lijiagou pegmatite spodumene deposit, is located southeast of the Ke'eryin pegmatite ore field, in the central Songpan–Garze Fold Belt (SGFB), Eastern Tibet. The Lijiagou albite spodumene pegmatites are unzoned, granite‐pegmatites of the subtype LCT (Lithium, Cesium, and Tantalum) and consist of medium‐ to coarse‐grained spodumene, lepidolite, microcline, albite, quartz, muscovite, and accessory amounts of beryl, cassiterite, columbite–tantalite and zircon. Secondary fluid inclusions in quartz and spodumene include two‐phase aqueous inclusions (V + L), mono‐phase vapor inclusions (V); three‐phase CO₂‐rich CO₂–H₂O inclusions (CO₂ + V + L) and less abundant liquid inclusions (L). The homogenization temperature of the fluid inclusions are low (257.3 to 204.3°C in early stage, 250.3 to 199.6°C in middle stage, 218.7 to 200.6°C in late stage). Fluid inclusions were formed during the long cooling period from the temperature of the pegmatite emplacement. Liquid–vapor–gas boiling was extensive during the middle and late stages. The salinity of the corresponding stages are 15.4 to 13.0 wt.% NaCl equiv., 12.5 to 9.1 wt.% NaCl equiv. and 9.8 to 7.8 wt.% NaCl equiv., respectively. δ¹⁸O values of fluid are 7.2 to 5.2‰, 5.6 to 3.9‰ and 2.7 to −0.2‰ from early to late stages; and δD range from −75.1 to −76.8‰, −59.0 to −73.5‰ and −61.6 to −85.5‰ respectively. The δ¹³C of CO₂ values are −5.6 to −6.6‰, −8.5 to −19.9‰, −11.8 to −18.7‰ from early to late stages, suggesting that CO₂ in the fluids were probably sourced from a magmatic system, possibly with some mixing of CO₂ dissolved in groundwater. δD and δ¹⁸O values of fluid indicate that the fluids were originally magmatic water and mixed with some meteoric water in late stage. The magma evolution sequence in the Ke'eryin orefield, from the central two‐mica granite through the Lijiagou deposit out to the distal pegmatites, with the ages gradually decreasing, indicates that the Ke'eryin complex rocks are the product of multistage magmatic activity. The large Lijiagou spodumene deposit is a typical magmatic, fractional crystallization related pegmatite deposit.     

PVT parameters of fluid inclusions and the C,O, N,and Ar isotopic composition in a garnet lherzolite xenolith from the Oasis Jetty,East Antarctica

Orthopyroxene, clinopyroxene, and olivine from a metasomatized mantle xenolith of garnet lherzolite in alkaline rocks at the Jetty Oasis, East Antarctica, contain numerous carbon dioxide-dominated composite melt-fluid and fluidized sulfide-silicate (±carbonate) inclusions. Although the maximum pressure under which the inclusions were captured by rock-forming minerals was evaluated at 13 kbar, its actual value should have been much higher, judging by the fact that the inclusions have lost part of their material (decrepitated) when the xenolith was brought to the surface. Two major fluid populations are distinguished. The fluids entrapped during the earlier episode have a more complicated composition. Dominated by CO₂, these fluids contain much N₂ (0.1–0.2 mole fractions), H₂S, and perhaps, also H₂O and are hosted by sulfide-silicate (±carbonate) inclusions produced by liquid immiscibility. As these inclusions evolved, they enriched in CO₂ and depleted in H₂S and N₂. Although the concentrations of N₂, H₂S, and H₂O were generally relatively low, these components played an important role in mantle metasomatism, as is reflected in the geochemistry of the derived magmas. The fluids of the younger episode (pressures lower than 7 kbar) are notably richer not only in CO₂ but also in H₂O (up to the appearance of inclusions with a liquid aqueous phase and the formation of CO₂ gas hydrate when cooled in a cryometric stage by liquid N₂). The effect of fluids on the mantle source in two discrete episodes is also confirmed by isotopic-geochemical data. Isotopic data on gases obtained immediately from fluid inclusions in minerals by the stepwise crushing technique provide evidence of the evolution of elemental and isotopic ratios of the gases in the course of the metasomatic processes. The high-pressure fluid inclusions of the earlier episode have low C/N₂, C/Ar, and N₂/Ar ratios, isotopically heavy N₂, and somewhat elevated (to 530) ⁴⁰Ar/³⁶Ar ratios. The younger fluids typically have higher (by two to three orders of magnitude) C/N₂ and C/Ar ratios, lower δ¹³C of CO₂, and N₂/Ar and ⁴⁰Ar/³⁶Ar ratios close to the atmospheric values. The nitrogen and argon isotopic compositions and elemental ratios suggest that the younger fluids could have been produced by two-component mixing in the mantle-atmosphere system. Comprehensive analysis of the data and in particular the ⁴⁰Ar/³⁶Ar ratios, which are atypical of the mantle, and an increase in the H₂O concentration, suggests a subduction-related nature of the fluids.     

Post-Variscan hydrothermal vein mineralization,Taunus, Rhenish Massif (Germany): Constraints from stable and radiogenic isotope data

Post-Variscan hydrothermal base-metal mineralization of the Taunus ore district, SE Rhenish Massif (Germany), has been studied through combination of stable (S, C, O) and radiogenic (Pb) isotope geochemistry. Based on field and textural observations, five hydrothermal mineralization types can be distinguished. These are (1) tetrahedrite–tennantite bearing quartz–ankerite veins, (2) quartz veins with Pb–Zn–Cu ores, (3) giant quartz veins, (4) metasomatic dolomite in Devonian reef complexes, and (5) calcite–(quartz) mineralization in Devonian reefs. The δ¹⁸O_V-SMOW quartz values of base-metal veins are in the range of 18.0–21.5‰, whereas those of giant quartz veins have lower values of 15.9–18.6‰. This difference reflects the higher fluid fluxes and smaller extent of rock-buffering for the giant quartz veins. Hydrothermal carbonates from the tetrahedrite and Pb–Zn–Cu veins have variable but distinctly negative δ¹³C_V-PDB values. They can be explained by contributions from fluids that had picked up low δ¹³C_V-PDB carbon via oxidation of organic matter and from fluids that interacted with Devonian reef carbonate having positive δ¹³C_V-PDB. Metasomatic dolomite has positive δ¹³C_V-PDB values that closely reflect those of the precursor limestone. By contrast, carbonates of calcite–(quartz) mineralization have negative δ¹³C_V-PDB values which are negatively correlated with the δ¹⁸O values. This pattern is explained by fluid mixing processes where contributions from descending cooler fluids with rather low salinity were dominant. The isotope data suggest that tetrahedrite veins, Pb–Zn–Cu veins, and giant quartz veins formed from fluid mixing involving two end-members with contrasting chemical features. This is supported by fluid inclusion data (Adeyemi, 1982) that show repeated alternation between two different types of fluid inclusions, which are hotter intermediate- to high-salinity NaCl–CaCl₂ fluids and cooler low-salinity NaCl-dominated fluids. The metal-rich saline fluids were likely generated at the boundary between the pre-Devonian basement and the overlying Devonian–Carboniferous nappe pile. Fault activation resulted in strong fluid focusing and upward migration of large volumes of hot Na–Ca brines, which mixed with cooler and more dilute fluids at shallower crustal levels. Variable contributions from both fluid types, local fluid fluxes, temperature variations, and variations in pH and oxidation state have then controlled the vein mineralogy and metal inventory.     

P-T-X conditions of calc-silicate formation: evidence from fluid inclusions and phase equilibria; Llano Uplift, central Texas, USA

Abstract The Llano Uplift in central Texas is a Grenville aged (c. 1.1 Ga) metamorphic terrane consisting predominantly of amphibolite facies mineral assemblages. The formation of these assemblages has been attributed to the emplacement of relatively late granite plutons throughout the area. Two types of granitic intrusion have previously been recognized: (1) Town Mountain Granites, which occur as relatively large, circular-shaped bodies of coarse-grained granite, and (2) Younger Granites which are present as smaller and more irregular bodies of finer-grained granite. In the central part of the uplift, wollastonite-bearing calc-silicate rocks occur within the Valley Spring Gneiss. The development of these calc-silicate rocks has been linked to infiltrating fluids presumably derived from spatially associated Younger Granites. The stability of coexisting quartz, calcite, wollastonite, grossular and anorthite and coexisting quartz, calcite, wollastonite, andradite and hedenbergite shows that the calc-silicate rocks equilibrated under H₂O-rich conditions with χCO₂ <0.10. Fluid inclusions present within the calc-silicate minerals are H₂O-rich with salinities of <17 wt% equivalent NaCl. The absence of any detectable CO₂ in the fluid inclusions may indicate entrapment of the inclusions at lower pressures and more H₂O-rich conditions compared to the stability of the peak metamorphic mineral assemblage. Homogenization temperatures, measured for texturally primary inclusions, range from 360 to 368° C corresponding to a density range from 0.53 to 0.82 g/cm³. Isochores for these fluid inclusions, when combined with the stability of the solid-solid equilibria Grs + Qtz = Wo + An, yield formation conditions of 500–550° C at 1–2 kbar. This indicates that the granitic intrusions involved in the formation of the Blount Mountain calc-silicates were emplaced at a pressure of at least 1–2 kbar.     

Pan-African high-grade metamorphism of southern Sinai,Egypt, fluid inclusion evidence

Fluid inclusions in the leucosomes of Wadi Feiran migmatites showed that CO ₂ , H₂O and (H₂O-CO₂) fluids were likely to have been present when partial melting began in these rocks. Low salinity, aqueous fluid, to a lesser extent, CO₂-rich fluids are the most abundant fluids. The present study suggests that high-density CO₂ inclusions were formed at the earliest stage, while H₂O inclusions were formed at the late stage. In an intermediate stage, low-density CO₂ and H₂O, CO₂ inclusions were formed. At the early stage of uplift and during melt crystallization, the CO₂-bearing vapour was trapped at grain boundaries. At the late stage of uplift, H₂O released at the time of crystallization of the melt was trapped as inclusions.     

Evolution of palaeofluids at the Variscan thrust front in eastern Belgium

The geochemical evolution of the fluids migra- ting at the Variscan thrust front in eastern Belgium has been investigated by a petrographic, mineralogical and geoche-mical study of ankerite, quartz and ferroan calcite veins hosted by lower Devonian rocks. Three vein generations have been recognized. The first generation consists of quartz, chlorite and ankerite filling pre- to early Variscan extensional fractures. The second generation is present as shear veins of Variscan age, and contains quartz, chlorite and ferroan calcite. The third generation consists of ankerite filling post-Variscan fractures. The oxygen and carbon isotopic composition of the two ankerite phases and of the ferroan calcites are respectively between –16.4 and –11.4‰ PDB between –17.8 and –1.7‰ PDB. This range is greater than that of calcite nodules in the lower Devonian siliciclastic sediments (δ¹⁸O= –15.6 to –11.1‰ PDB and δ¹³C= –13.4 to –10.2‰ PDB). This suggests precipitation of the carbonate veins from a fluid which was at most only partly isotopically buffered by the calcite nodules in the host rock. The calculated oxygen isotopic composition of the ambient fluid from which the calcite veins formed is between +7.8 and +10.0‰ SMOW. Two main fluid types have been recognized in fluid inclusions in the quartz and carbonates. The first fluid type is present as secondary fluid inclusions in the first and second vein generations. The fluid has a salinity of 0.5–7.2 eq. wt.% NaCl and a high, but variable, homogenization temperature (Th=124–188°C). Two origins can be proposed for this fluid. It could have been expelled from the lower Devonian or could have been derived from the metamorphic zone to the south of the area studied. Taking into account the microthermometric and stable-isotope data, and the regional geological setting, the fluid most likely originated from metamorphic rocks and interacted with the lower Devonian along its migration path. This is in agreement with numerical simulations of the palaeofluid and especially the palaeotempera-ture field, which is based on chlorite geothermometry and vitrinite reflectance data. The second fluid type occurs as secondary inclusions in the shear veins and as fluid inclusions of unknown origin in post-Variscan ankerite veins. Therefore, it has a post-Variscan age. The inclusions are characterized by a high salinity (18.6–22.9 eq. wt.% CaCl₂). The composition of the fluid is similar to that which caused the development of Mississippi Valley-type Pb–Zn deposits in Belgium.     

Ore-forming fluids associated with granite-hosted gold mineralization at the Sanshandao deposit, Jiaodong gold province, China

The Sanshandao gold deposit, with total resources of more than 60 t of gold, is located in the Jiaodong gold province, the most important gold province of China. The deposit is a typical highly fractured and altered, disseminated gold system, with high-grade, quartz-sulphide vein/veinlet stockworks that cut Mesozoic granodiorite. There are four stages of veins that developed in the following sequence: (1) quartz-K-feldspar-sericite; (2) quartz-pyrite±arsenopyrite; (3) quartz-base metal sulfide; and (4) quartz-carbonate. Fluid inclusions in quartz and calcite in vein/veinlet stockworks contain C-O-H fluids of three main types. The first type consists of dilute CO₂–H₂O fluids coeval with the early vein stage. Molar volumes of these CO₂–H₂O fluid inclusions, ranging from 50–60 cm³/mol, yield estimated minimum trapping pressures of 3 kbar. Homogenization temperatures, obtained mainly from CO₂–H₂O inclusions with lower CO₂ concentration, range from 267–375 °C. The second inclusion type, with a CO₂–H₂O±CH₄ composition, was trapped during the main mineralizing stages. These fluids may reflect the CO₂–H₂O fluids that were modified by fluid/rock reactions with altered wallrocks. Isochores for CO₂-H₂O±CH₄ inclusions, with homogenization temperatures ranging from 204–325 °C and molar volumes from 55 to 70 cm³/mol, provide an estimated minimum trapping pressure of 1.2 kbar. The third inclusion type, aqueous inclusions, trapped in cross-cutting microfractures in quartz and randomly in calcite, are post-mineralization, and have homogenization temperatures between 143–228 °C and salinities from 0.71–7.86 wt% NaCl equiv. Stable isotope data show that the metamorphic fluid contribution is minimal and that ore fluids are of magmatic origin, most likely sourced from 120–126 Ma mafic to intermediate dikes. This is consistent with the carbonic nature of the fluid, and the cross-cutting nature of those deposits relative to the host Mesozoic granitoid.Editorial handling: R.J. Goldfarb