Petrographyof some fraser river delta peat deposits: Coal maceral and microlithotype precursors in temperate-climate peats

Peat deposits on the recent lobe of the Fraser River delta, British Columbia, have accumulated in a variety of depositional settings. The study of the decomposition of the plant components associated with each depositional area has enabled prediction of the occurrence and distribution of the precursors of the loal macerals and microlithotypes.On inactive portions of the distal lower delta plain, thin sedge-grass peats ave developed. These peats were influenced by marine conditions near the base and freshwater conditions higher in the section. A high ratio of cellulose to lignin in marsh plants and limited exposure of these tissues to desiccation and oxidation prodcue primarily desmocollinite. Smaller amounts of cernite, cutinite, and alganite origginate from algal and sedge lipids. In the transition to freshwater peats, oxyfusinite, pyrofusinite and micrinite partially replace former exinite and vitrinite-group maceral precursors. Subsequent transgression by marine waters has further promoted decomposition of the peat. Laterally extensive but thin and discontinouus coal seams which would develop from such peat will contain vitrite bands near the base and grade upsection into interlamlaminated durite and vitrinertite.Peats deposited between the upper and lowerdelta plain originate from brackish water. As such, earliest peat horizons contain similar maceral compositions to thoce encountered in distal delta plain deposits. Crevasse and fire splays disrupt gradational changes in fabric upsection and along channel margins. Flooding by oxygenated, neutral pH waters, followed by extended periods of desicaation, result in increases of inertodetrinite, macrinite, sclerotinite, and oxyfusinite. Interlaminated durites and vitrinertites will form common microlithotypes. Interbedded bands of telinite, cutinite and cerinite are produced by later freshwater sedge-grass peat accumulations. In this biofacies, clarite replaces durite. After colonization by Sphagnum, lignin-rich tissues from ericaceous shrubs and Pinus contorta provide precurssors for subernnite, telocollinite, and telinite. Stumps of massive telinite interrupt these banded macerals. Coal seams originating from such peats would be thick, laterally extensive and characterized by vitrite with laminae of liptite and lenses of clarite in the upper part     

Controls on peat accumulation in the Permian Vryheid Formation in a part of northern Natal,South Africa

The early Permian Vryheid Formation is a fluviodeltaic tongue of sediment deposited on the passive northern margin of an asymmetric, intracontinental linear trough (Karoo basin). In the study area these strata attain a maximum thickness of about 270 m, comprising three informal lithostratigraphic members (Lower zone, Coal zone and Upper zone).The Coal zone is characterized by arkosic, coarse to very coarse, pebbly sandstones and subordinate fines arranged in upward-fining sequences, many of which are coal-capped. These units are interpreted as distal outwash fan deposits.Sedimentation patterns in the Upper and Lower zones are dominated by superimposed upward-coarsening sequences representing repeated wave/fluvially-dominated fan delta progradation.Peat accumulation in the cool, seasonal climate which prevailed during Vryheid Formation sedimentation was slow. Significant peat thicknesses were deposited only in areas of low basin/compaction subsidence in the Coal zone during a period of general stability. Extensive upper delta plain and alluvial plain peats formed on broad platforms created by abandonment of braided channel systems. The thickest peats accumulated in raised swamps where vegetation-stabilized contemporaneous channels promoted a high water table. Peat erosion by later channel activity was slight since channel widening rather than stream-bed erosion prevailed. Coals thin, split and contain more ash near loci of contemporaneous channel activity. Upper delta plain coals were not marine-influenced. Some lower delta plain coals also formed on broad abandoned deltas and are likewise extensive. Rapid compaction subsidence rates attracted channel activity or marine incursions and the seams are thin. Peats also accumulated in restricted emergent interdistributory bays during delta construction. These coals are thin, discontinuous, marine-influenced and contain numerous clastic partings.     

陕西省榆林地区延安组湖滨下三角洲平原沉积中的决口扇三角洲沉积及其意义

陕西榆林延安组湖滨下三角洲平原沉积中决口扇三角洲具如下特点:（1）发育在湖滨下三角洲平原的分流间地区;（2）平面上垂直主分流河道向外呈扇形或朵叶状;（3）剖面上呈透镜状夹在两个煤分层之间;（4）前三角洲沉积的厚度小,前缘中植物碎屑含量高;（5）发育时间短,一般不超过1万年。决口扇三角洲沉积体间的排列关系受控于压实沉降作用,不同的排列形式导致煤层出现叠瓦状分叉和环状分叉。     

马依西勘探区含煤地层岩相及沉积环境分析

根据盘南矿区马依西井田大量地质资料分析,认为龙潭组形成于潮坪、三角洲及海湾—泻湖沉积体系,下部为潮坪—潮道沉积组合,主要由潮坪相、潮道相、沼泽及泥炭沼泽相组成,形成的煤层硫分高,连续性差;中部为三角洲沉积组合,主要由前三角洲相、三角洲前缘相及三角洲平原相组成,其煤层硫分低,稳定性好,分叉少;上部为海湾—潟湖相沉积组合,由潟湖相局部海湾相及沙洲砂坝相组成。分流河道的泛滥盆地、支流间湾、废弃河道、潮坪—潮道为本区煤层的形成提供了有利沉积环境。     

滇东田坝黔西土城晚二叠世煤系上段沉积相及含煤性

晚二叠世煤系上段相当于长兴阶,是浅水三角洲复合体破坏阶段沉积。本区可分为上三角洲平原、上下三角洲过渡带、下三角洲平原三大相区及发育在三角洲体系外侧的坝湾体系。西部以河流作用为主,东部具河流和潮汐作用双重特征。形成于上下三角洲过渡带的煤层最具工业价值,其次是上三角洲平原,其它沉积类型的煤层一般不具工业价值。     

Facies and genesis of Carboniferous coal seams of Northwest Germany

In order to get detailed information about the facies and genesis of Upper Carboniferous coal seams of Northwest Germany, maceral analyses of complete seam profiles (Westphalian B-D, mainly Westphalian C) were carried out. Four main facies and twelve subfacies could be distinguished. The main facies are:

1. (1) The sapropelic-coal facies, consisting of fine-grained inertinite and liptinite, which forms from organic sediments deposited at the bottom of moor lakes.

2. (2) The densosporinite facies which is high in inertinite and liptinite and low in vitrinite. Syngenetic pyrites, clastic layers, thick vitrains and fusains do not occur. This facies originates from peats of ‘open mires’ with higher groundwater table and herbaceous vegetation. The ‘open mire’ was situated in the centre of extensive swamps. Consequently, clastic sedimentation did not affect this swamp type and nutrient supply and pH values were low.

3. (3) The vitrinite-fusinite facies, which is high in vitrinite. This is the result of abundant vitrains. Under the microscope, fusains were mostly identified as fusinite. The vitrinite-fusinite facies originates from a forest mire. More or less abundant seam splits and clastic layers show that rivers flowed in the neighbourhood of this area.

4. (4) The shaly-coal facies, which represents the most marginal part of the former swamp frequently affected by clastic sedimentation.

Within the Carboniferous of the Ruhr Region it seems unlikely that the thin coal seams of the Namurian C and Westphalian A1 contain a densosporinite facies. The swamps were situated in the lower delta plain where they were often affected by marine influences. Consequently, coals are high in minerals and sulfur and they are thin and discontinous. The best conditions for the formation of extensive swamps, with open mires (densosporinite facies) in their central parts, prevailed during Westphalian A2 and B1 times. Low contents of sulfur and minerals and high content of inertinite are typical for these coals. Sedimentation mainly took place in the transitional zone from the lower to the upper delta plain. During the Westphalian B2 and C fluvial sedimentation dominated. Within the coal seams minerals, sulfur and pseudovitrinite increase while inertinite decreases. This is the consequence of coal of the densosporinite facies occurring with increased rarity. The coal seams of the Westphalian C2 contain no densosporinite facies because peat formation was restricted by increasing fluvial sedimentation and by a better drainage. As a consequence, extensive swamps with ‘open mires’ in the centre were no longer formed after the formation of the “Odin” seams. Above the “Odin” seams coal of the vitrinite-fusinite facies contains thick-walled torisporinites. Variations and lowering of the groundwater table caused mild oxidative influences during peat formation. This is documented by an increase in pseudovitrinite, the occurrence of torisporinites and the absence of spheroidal sideritic concretions. Sulfur content increases in the absence of the low-ash and low-sulfur coal of the densosporinite facies.In Upper Carboniferous coal seams of the Ibbenbüren Region the inertinite and telocollinite contents are higher than in those of the Ruhr Region. Therefore, variations of the groundwater table have been more pronounced and resulting oxidative influences must have been more severe. Seldom occurring marine and brackish horizons and a higher fusinite (fusain) content indicate a slight elevation of this area. From Early Westphalian D times onward, peat formation was no longer possible because of the better drainage. This resulted in severe oxidative conditions which excluded peat formation.     

A sequence stratigraphic model for the Lower Coal Measures (Upper Carboniferous) of the Ruhr district, north-west Germany

Upper Carboniferous Coal Measures strata have been interpreted traditionally in terms of cyclothems bounded by marine flooding surfaces (marine bands) and coal seams. Correlation of such cyclothems in an extensive grid of closely spaced coal exploration boreholes provides a robust stratigraphic framework in which to study the Lower Coal Measures (Namurian C–Westphalian A) of the Ruhr district, north-west Germany. Three distinct types of cyclothem are recognized, based on their bounding surfaces and internal facies architecture. (1) Type 1 cyclothems are bounded by marine bands. Each cyclothem comprises a thick (30–80 m), regionally extensive, coarsening-upward delta front succession of interbedded shales, siltstones and sandstones, which may be deeply incised by a major fluvial sandstone complex. The delta front succession is capped by a thin (<1 m), regionally extensive coal seam and an overlying marine band defining the top of the cyclothem. (2) Type 2 cyclothems are bounded by thick (≈1 m), regionally extensive coal seams with few splits. The basal part of a typical cyclothem comprises a thick (15–50 m), widespread, coarsening-upward delta front or lake infill succession consisting of interbedded shales, siltstones and sandstones. Networks of major (>5 km wide, 20–40 m thick), steep-sided, multistorey fluvial sandstone complexes erode deeply into and, in some cases, through these successions and are overlain by the coal seam defining the cyclothem top. (3) Type 3 cyclothems are bounded by regionally extensive coal seam groups, characterized by numerous seam splits on a local (0·1–10 km) scale. Intervening strata vary in thickness (15–60 m) and are characterized by strong local facies variability. Root-penetrated, aggradational floodplain heteroliths pass laterally into single-storey fluvial channel-fill sandstones and coarsening-upward, shallow lake infill successions of interbedded shales, siltstones and sandstones over distances of several hundred metres to a few kilometres. Narrow (<2 km) but thick (20–50 m) multistorey fluvial sandstone complexes are rare, but occur in a few type 3 cyclothems. Several cyclothems are observed to change character from type 1 to type 2 and from type 2 to type 3 up the regional palaeoslope. Consequently, we envisage a model in which each cyclothem type represents a different palaeogeographic belt within the same, idealized delta system, subject to the same allogenic and autogenic controls on facies architecture. Type 1 cyclothems are dominated by deltaic shorelines deposited during a falling stage and lowstand of sea level. Type 2 cyclothems represent the coeval lower delta plain, which was deeply eroded by incised valleys that fed the falling stage and lowstand deltas. Type 3 cyclothems comprise mainly upper delta plain deposits in which the allogenic sea-level control was secondary to autogenic controls on facies architecture. The marine bands, widespread coals and coal seam groups that bound these three cyclothem types record abandonment of the delta system during periods of rapid sea-level rise. The model suggests that the extant cyclothem paradigm does not adequately describe the detailed facies architecture of Lower Coal Measures strata. Instead, these architectures may be better understood within a high-resolution stratigraphic framework incorporating sequence stratigraphic key surfaces, integrated with depositional models derived from analogous Pleistocene–Holocene fluvio-deltaic strata.     

Upper delta plain lacustrine and fluviolacustrine facies from the Westphalian of the Durham coalfield, NE England

Facies analysis suggests that the productive Westphalian (Upper Carboniferous) Coal Measures of the Durham coalfield in NE England were deposited on an upper delta plain. Distributary channels crossed the plain and were separated by shallow lakes. Detailed examination of largely three-dimensional exposures has revealed the existence of nine laterally and vertically interrelated fluviolacustrine and lacustrine lithofacies. Facies 1 and 2 are interpreted as overbank deposits of distributary channels, Facies 3–5 are regarded as deposits of crevasse splay/minor delta systems, and Facies 6–9 are considered to have formed in areas of diminished clastic sediment supply. Facies 4 and 5 are volumetrically the most important. Facies 3–9 are interpreted as representing progressively less energetic conditions of sedimentation across a lake, from the point of entry of a crevasse splay/minor delta system. The distribution and characteristics of the lithofacies indicate that the upper delta plain lakes were completely or effectively enclosed, up to about 8m deep and had wave fetches of the order of 20 km. These lakes were intermittently infilled by the crevasse-initiated, minor delta systems and, to a relatively minor extent, by overbank flood sediment from channels. Infilled lake surfaces became platforms for plant colonization and peat accumulation. The three dimensional relationships of the various lithofacies provide a model of Coal Measure lacustrine sedimentation, which may have wider implications in extending the model of interdistributary genesis and infilling proposed by Elliott, particularly with respect to detailed facies relationships and to the balance between overbank and crevasse-derived sediment.     

豫西荥巩——新密煤田太原组、山西组的沉积环境和聚煤规律

荥巩和新密煤田是豫西北部的两个相邻煤田。主要含煤地层为晚古生代晚石炭世太原组和早二叠世山西组,总厚100—150m;下石盒子组及晚二叠世的上石盒子组在本区仅偶含薄煤层。太原组位于含煤岩系最底部,为碳酸盐岩和碎屑岩交替沉积,灰岩形成于清澈、温暖、浅水的陆表海潮下环境,碎屑岩则为潮道和潮间带为主的潮道、潮坪沉积。太原组含有6—7层薄煤层,形成于咸水或半咸水的泥炭沼泽中。山西组几乎全由碎屑岩组成,下部发育本区的主要可采煤层二1煤。二1煤以下层位为潮坪和横向与之共生的潮道、潮沟及河口潮汐砂脊沉积,二1煤以上为河流作用为主的三角洲沉积,三角洲由北向南进积到半咸水的海湾中。二1煤形成于海退时期,它们堆积在滨海平原的淡水泥炭沼泽中,其厚度变化及发育程度主要受成煤前沉积环境控制,但在本区西部构造较复杂处,煤层厚度受后期构造影响较大。沉积环境对煤层原生厚度的影响主要表现在潮坪和废弃的潮道、潮沟、河口潮汐砂背沉积物之上,煤层发育好,而在二1煤之下有活动的潮道及河口潮汐砂脊发育时,煤层较薄或不发育。     

澳大利亚北卡那封盆地中上三叠统Mungaroo三角洲陆源有机质分布特征

北卡那封盆地中上三叠统Mungaroo组发育巨型浅水辫状河三角洲——Mungaroo三角洲。利用钻井、岩心资料,并结合区域地质背景,将Mungaroo三角洲划分为近端三角洲平原、远端三角洲平原、三角洲前缘、前三角洲4个沉积亚相,其中近端三角洲平原与远端三角洲平原亚相分布广泛,三角洲前缘与前三角洲亚相欠发育。陆源有机质分析表明:(1)研究区目的层段沉积时期,在环特提斯洋巨型季风洪水的影响下,泥炭沼泽普遍遭受冲刷改造,有机质类型主要为分散有机质,仅远端三角洲平原发育薄煤层;(2)不同相带受季风洪水的影响差异较大,近端三角洲平原受洪水改造强烈,砂砾岩发育,夹薄层泥岩,泥岩中有机质显微组分主要为惰质组,镜质组大部分遭受氧化;(3)远端三角洲平原的沼泽沉积尽管受到洪水频繁冲刷,但仍发育多套薄煤层,泥岩中陆源有机质最为丰富,显微组分以镜质组为主;(4)三角洲前缘和前三角洲相带窄,沉积物中陆源有机质含量较低。远端三角洲平原烃源岩有机质生烃潜力最大,除发育广泛的薄煤层外,暗色泥岩中平均TOC含量可达4.11％。上述沉积相带与陆源有机质分布规律体现了强季风洪水影响下大型辫状河三角洲的沉积特点。     

The Karoo Basin of South Africa: type basin for the coal-bearing deposits of southern Africa

The coal-bearing sediments and coal seams of the Karoo Basin, Southern Africa are described and discussed. The Karoo Basin is bounded on its southern margin by the Cape Fold Belt, onlaps onto the Kaapvaal Craton in the north and is classified as a foreland basin. Coal seams are present within the Early Permian Vryheid Formation and the Triassic Molteno Formation.The peats of the Vryheid Formation accumulated within swamps in a cool temperate climatic regime. Lower and upper delta plain, back-barrier and fluvial environments were associated with peat formation. Thick, laterally extensive coal seams have preferentially accumulated in fluvial environments. The coals are in general inertinite-rich and high in ash. However, increasing vitrinite and decreasing ash contents within seams occur from west to east across the coalfields. The Triassic Molteno coal seams accumulated with aerially restricted swamps in fluvial environments. These Molteno coals are thin, laterally impersistent, vitrinite-rich and shaly, and formed under a warm temperate climatic regime.Palaeoclimate, depositional systems, differential subsidence and basin tectonics influence to varying degrees, the maceral content, thickness and lateral extent of coal seams. However, the geographic position of peat-forming swamps within a foreland basin, coupled with basin tectonics and differential subsidence are envisaged as the primary controls on coal parameters. The Permian coals are situated in proximal positions on the passive margin of the foreland basin. Here, subsidence was limited which enhanced oxidation of organic matter and hence the formation of inertinitic coals. The coals in this tectonic setting are thick and laterally extensive. The Triassci coals are situated within the tectonically active foreland basin margin. Rapid subsidence and sedimentation rates occurred during peat formation which resulted in the preservation of thin, laterally impersistent, high ash, vitrinite-rich, shaly coals.     

利用测井曲线判识鸳鸯湖矿区成煤环境及沉积类型

根据以往钻孔及其测井资料,对鸳鸯湖矿区早-中侏罗世延安期的沉积环境及沉积类型进行了划分：即垂向正层序湖泊三角洲平原相沉积与反层序的三角洲前缘相、湖湾相沉积。前者表现为浅湖泊三角洲的推进,后者表现为浅湖泊三角洲的废弃。其中三角洲平原相沉积类型包括分流河道天然堤沉积组合,决口扇泛滥平原沉积组合,以及泥炭、沼泽沉积组合;三角洲前缘相沉积类型包括河口坝沉积（近端坝、远端坝）、水下分流河道沉积、水下天然堤、分流间湾沉积。通过对比各种沉积组合在自然伽马、视电阻率等测井曲线形态上的反映特征,指出测井曲线异常形态能够反映本区的沉积旋回,并以此总结出了鸳鸯湖矿区的成煤环境、沉积旋回的划分及聚煤规律。     

大同煤田白洞矿区5号煤层煤相特征

采用光学显微镜、X射线荧光光谱（XFS）和电感耦合等离子体质谱（ICP-MS）等方法测定了大同煤田塔山井田太原组5号煤的宏观煤岩类型、显微煤岩类型和地球化学参数,探讨了煤的煤岩学、煤地球化学及煤相特征,系统地分析了煤层的原始成煤泥炭沼泽环境及演化规律。研究结果表明,5号煤层有4种煤相类型,即湖沼相、泥炭沼泽相、潮湿森林沼泽相和较干燥森林沼泽相,相应表现为湖泊、障壁岛后潟湖、上三角洲平原和洪泛盆地含煤沉积体系特征。煤层自下而上存在5次比较明显的沉积旋回韵律,与之相随的水介质环境也发生了相应的海陆、咸水、淡水交替变化,从而形成了一套以陆相为主、海陆交互的成煤泥炭沼泽环境,沉积环境逐渐从海相、海陆过渡相向陆相演化。     

低可容空间浅水三角洲沉积层序及聚煤模式:以渤海湾地区下二叠统山西组为例*

为研究低可容空间浅水三角洲体系沉积层序及聚煤模式,以渤海湾地区下二叠统山西组为主要研究对象,开展层序地层研究,在层序地层格架内揭示低可容空间浅水三角洲体系聚煤模式。根据沉积相转换面以及下切谷冲刷面两类不整合面(SU)可将山西组划分为3个三级层序Sq1、Sq2及Sq3,每个三级层序代表 1期三角洲。通过最大洪泛面(MFS)与最大水退面(MRS)将每个三级层序划分为LST、TST及HST 3个体系域,代表 9个四级层序。根据岩性参数等值线绘制一系列特定于层序的沉积相图,在可容空间增长速率及泥炭堆积速率的控制下,三角洲平原泛滥平原及三角洲前缘泥炭沼泽为聚煤中心,位于冀中坳陷东部、黄骅坳陷中北部以及济阳坳陷部分地区。泛滥平原中形成的煤层厚度大,且聚煤中心具有随三角洲推进逐渐南移的趋势,三角洲前缘聚煤环境相对较差,形成的煤层厚度较薄,且易被分流河道砂体冲刷。渤海湾地区下二叠统浅水三角洲层序地层学及沉积学分析为聚煤模式提供了基础,该模式包括LST、TST早期、TST中期、TST晚期以及HST 5个时期的演化。煤层主要聚集在Sq1与Sq2的TST以及HST时期。这些成果对渤海湾地区煤炭资源勘探及提高钻探工程地质效果具有现实意义。     

低可容空间浅水三角洲沉积层序及聚煤模式:以渤海湾地区下二叠统山西组为例*

为研究低可容空间浅水三角洲体系沉积层序及聚煤模式,以渤海湾地区下二叠统山西组为主要研究对象,开展层序地层研究,在层序地层格架内揭示低可容空间浅水三角洲体系聚煤模式。根据沉积相转换面以及下切谷冲刷面两类不整合面(SU)可将山西组划分为3个三级层序Sq1、Sq2及Sq3,每个三级层序代表 1期三角洲。通过最大洪泛面(MFS)与最大水退面(MRS)将每个三级层序划分为LST、TST及HST 3个体系域,代表 9个四级层序。根据岩性参数等值线绘制一系列特定于层序的沉积相图,在可容空间增长速率及泥炭堆积速率的控制下,三角洲平原泛滥平原及三角洲前缘泥炭沼泽为聚煤中心,位于冀中坳陷东部、黄骅坳陷中北部以及济阳坳陷部分地区。泛滥平原中形成的煤层厚度大,且聚煤中心具有随三角洲推进逐渐南移的趋势,三角洲前缘聚煤环境相对较差,形成的煤层厚度较薄,且易被分流河道砂体冲刷。渤海湾地区下二叠统浅水三角洲层序地层学及沉积学分析为聚煤模式提供了基础,该模式包括LST、TST早期、TST中期、TST晚期以及HST 5个时期的演化。煤层主要聚集在Sq1与Sq2的TST以及HST时期。这些成果对渤海湾地区煤炭资源勘探及提高钻探工程地质效果具有现实意义。     

白布勘探区龙潭组沉积环境及成煤条件分析

贵州大方县白布勘探区煤系地层龙潭组为海陆交互相沉积,厚度177～211m,含煤21～36层,煤层总厚18.04～30.29m,可采煤层6层。根据岩性、岩相特征自下而上分为3段,下段为潟湖—潮坪相沉积,并在大部分地区形成泥炭沼泽,形成了可采的33、28号煤层;中段为三角洲相,泥岩沼泽相多在三角洲分流河道间的湖沼区及湖波浪带基础上发育而成,煤层层位稳定,厚度不大;上段为潮坪三角洲相,该期构造活动趋于平稳,形成的煤层层位稳定,厚度大,6中煤0.39～6.88m,7号煤0～3.09m。三段厚度比较接近,反映该区晚二叠世期间地壳沉降均衡。沉积环境差异是本区成煤条件的主要控制因素。     

鲁西南二叠纪近海盆地缓坡三角洲沉积古地理演化

运用沉积学、岩石学的方法,结合野外露头实测与钻井观察,在鲁西南二叠纪近海盆地缓坡三角洲沉积中识别出6种岩相和8种沉积微相,其中6种岩相为灰黄色粗砂岩相（CS）、浅灰色中砂岩相（MS）、浅灰色细砂岩相（FS）、深灰色互层的泥岩与粉砂岩相（MFS）、煤（CB）、暗色泥岩相（DM）;8种沉积微相为分流河道相（MS与CS相组合）、河口砂坝相（MS与FS相组合）、天然堤相（FS与MFS相组合）、决口扇相（MS、FS与MFS相组合）、分流间湾相（DM与MFS相组合）、泥炭沼泽相（DM与CB相组合）、远砂坝相（MFS）和海湾或滨浅海相（DM）。在此基础上,采用层序地层方法进行等时地层对比,发现本区三角洲沉积序列含有4个沉积旋回,C1旋回早期以前三角洲的海湾相为主,晚期为三角洲前缘和三角洲平原沉积;C2旋回早期以三角洲前缘、前三角洲和三角洲平原沉积为主,晚期为三角洲平原沉积;C3旋回早期为三角洲前缘沉积,晚期为三角洲平原沉积;C4旋回主要以三角洲平原为主和陆相的河流沉积。     

滇东田坝黔西土城晚二叠世煤系上段煤岩特征及煤相分析

本文通过滇东田坝黔西土城晚二叠世煤系上段沉积相、煤层特征和煤岩煤质的综合研究,系统分析了区内煤层形成时的沉积环境.按成煤的古地理位置分为上三角洲煤相和上、下三角洲过渡带-下三角洲煤相两大类型.根据成煤的原始质料、结构构造、煤岩特征和成煤前后环境,详细划分出八种泥炭沼泽相.着重探讨3号煤层形成时的泥炭沼泽相特征及其变化.     

Evidence for an early land use in the Rhône delta (Mediterranean France) as recorded by late Holocene fluvial paleoenvironments (1640–100 BC)

The overall objective of this paper is to describe the late Holocene (1640–100 BC) sedimentary and biological evolution of the Rhône–delta–plain, to interpret the sedimentary facies and palynofacies as the result of the effects of fluvial dynamic fluctuations and relative sea level change and to evaluate the paleohydrological constraints in the development of the land use and settlements of the Camargue. Focus is made on the upper part of V_III core drilled on NE of the Vaccarès lagoon. By combining sedimentology, palynology, magnetic susceptibility and archeological data, this study allowed to identify the superposition of three types of paleo-environments (marsh, fluvial floodplain, levee/crevasse splay). This sequence indicates a gradual extension of fluvial environments between the end of the second millennium BC and the 1st century BC. The variability of fluvial dynamic is evident during this period with important flood events which contrast with periods of low flow. Pollen record can be a good marker of the fluvial dynamic variability. The expression of the riparian tree pollen grains in the coarser floodplain deposits could correspond to increased fluvial influence and probably to erosion of riverbank during flood events. The local plants are associated to the low energy sedimentary environments. Focuses are made on the relations between the evolution of the environment and land use. The development of the cereal culture in the floodplain of the Rhône delta has been demonstrated between 1640–1410 and 100 BC. The last alluviation of the Rhône perturbs the research of the archaeological sites in the central part of the delta but the existence of the rural villages from the first part of the first millennium BC is highly possible.     

柴达木盆地西部地区古近纪与新近纪沉积相

利用数十口井的电性、岩性及分析化验资料，将柴达木盆地西部地区古近纪与新近纪沉积相划分为七种相和亚相：洪积锥、水下冲积扇、河道和泛滥平原、滨湖、浅湖、较深湖和三角洲。沉积相的空间展布概括起来分为三大带：（1）阿尔金山前西段陡坡带洪积锥-水下冲积扇-扇三角洲-河道和泛滥平原-湖相 (2)阿尔金山前中段陡坡带洪积锥-水下冲积扇-湖相；（3）昆仑山前洪积锥-河道和泛滥平原-三角洲相。沉积相不仅影响着碎屑岩的成分和结构，而且也影响其物性与含油性。由洪积锥到水下冲积扇，到河道和泛滥平原，到三角洲，到湖相，石英和胶结物含量逐渐升高，岩屑和杂基含量逐渐降低，分选及磨圆变好，颗粒的粒级变细。浅层以河道和泛滥平原及三角洲相的物性最好，深层以三角洲相的物性最好，次为冲积扇，湖相最差。碎屑岩的油气富集以河道、泛滥平原和三角洲相最好，滨浅湖相油气富集最差。