Impact of structural and autocyclic basin-floor topography on the depositional evolution of the deep-water Valparaiso forearc basin, central Chile

The Valparaiso Basin constitutes a unique and prominent deep‐water forearc basin underlying a 40‐km by 60‐km mid‐slope terrace at 2.5‐km water depth on the central Chile margin. Seismic‐reflection data, collected as part of the CONDOR investigation, image a 3–3.5‐km thick sediment succession that fills a smoothly sagged, margin‐parallel, elongated trough at the base of the upper slope. In response to underthrusting of the Juan Fernández Ridge on the Nazca plate, the basin fill is increasingly deformed in the seaward direction above seaward‐vergent outer forearc compressional highs. Syn‐depositional growth of a large margin‐parallel monoclinal high in conjunction with sagging of the inner trough of the basin created stratal geometries similar to those observed in forearc basins bordered by large accretionary prisms. Margin‐parallel compressional ridges diverted turbidity currents along the basin axis and exerted a direct control on sediment depositional processes. As structural depressions became buried, transverse input from point sources on the adjacent upper slope formed complex fan systems with sediment waves characterising the overbank environment, common on many Pleistocene turbidite systems. Mass failure as a result of local topographic inversion formed a prominent mass‐flow deposit, and ultimately resulted in canyon formation and hence a new focused point source feeding the basin. The Valparaiso Basin is presently filled to the spill point of the outer forearc highs, causing headward erosion of incipient canyons into the basin fill and allowing bypass of sediment to the Chile Trench. Age estimates that are constrained by subduction‐related syn‐depositional deformation of the upper 700–800 m of the basin fill suggest that glacio‐eustatic sea‐level lowstands, in conjunction with accelerated denudation rates, within the past 350 ka may have contributed to the increase in simultaneously active point sources along the upper slope as well as an increased complexity of proximal depositional facies.     

Quantitative analysis of Miocene to Recent forearc basin evolution along the Colombian convergent margin

The Colombian accretionary complex forms the active convergent margin of the North Andes block of South America beneath which the east Panama Basin of the Nazca plate is subducted at a rate of 50–64 km Myr^?1. Multichannel seismic reflection data, collected as part of RRS Charles Darwin cruise CD40, image a series of well-developed forearc basins along the length of the margin, bounded on their oceanward side by an active accretionary complex and on their landward side by oceanward-dipping continental basement. Sedimentary sequences within the forearc basins indicate successive landward migration of the basin depocentre as the structural high bounding its oceanward edge is forced upward and landward by continued growth of the accretionary complex. Uplift beneath the oceanward side of the basins has resulted in progressive landward rotation of the older sedimentary sequences. Prominent seismic reflectors across the basins show a complex onlap–offlap relationship between successive sequences that reflects the interplay between tectonic uplift, sediment supply, differential sediment compaction and basement subsidence due to loading. A numerical model has been devised to investigate how Miocene to Recent forearc basin stratigraphy is controlled by progressive growth of the accretionary complex resulting in elevation of the outer-arc high and landward motion of the rear of the complex up the seaward-dipping backstop formed by the leading edge of the continental lithosphere. The effects of sediment accretion are modelled by treating the accretionary complex as a doubly vergent, noncohesive Coulomb wedge, where forces exerted by the proto- and retro-wedges must be balanced for the system to be in equilibrium. The model generates synthetic basin-fill architecture over a series of steps, each of which represents the deposition of individual sedimentary sequences and their subsequent deformation due to wedge growth. The model accounts for differential sediment compaction and the flexural response of the underlying lithosphere to changes in load distribution over time. Forearc basin evolution is simulated for various rates of sediment supply to the forearc and accretionary complex growth until the synthetic basin-fill geometry matches the observed geometry. The model enables either the rate of accretionary wedge growth or the rate of sediment supply to the forearc basin to be established. The technique is generally applicable to those convergent margins with forearc basins that have developed between an actively accreting wedge and a seaward-dipping backstop. Other examples include Peru, S. Chile, Sumatra and Barbados.     

Slope basins, headless canyons, and submarine palaeoseismology of the Cascadia accretionary complex

A combination of geomorphological, seismic reflection and geotechnical data constrains this study of sediment erosion and deposition at the toe of the Cascadia accretionary prism. We conducted a series of ALVIN dives in a region south of Astoria Canyon to examine the interrelationship of fluid flow and slope failure in a series of headless submarine canyons. Elevated head gradients at the inflection point of canyons have been inferred to assist in localized failures that feed sediment into a closed slope basin. Measured head gradients are an order of magnitude too low to cause seepage-induced slope failure alone; we therefore propose transient slope failure mechanisms. Intercanyon slopes are uniformly unscarred and smooth, although consolidation tests indicate that up to several metres of material may have been removed. A sheet-like failure would remove sediment uniformly, preserving the observed smooth intercanyon slope. Earthquake-induced liquefaction is a likely trigger for this type of sheet failure as the slope is too steep and short for sediment flow to organize itself into channels. Bathymetric and seismic reflection data suggest sediment in a trench slope basin between the second and third ridges from the prism's deformation is derived locally. A comparison of the amounts of material removed from the slopes and that in the basin shows that the amount of material removed from the slopes may slightly exceed the amount of material in the basin, implying that a small amount of sediment has escaped the basin, perhaps when the second ridge was too low to form a sufficient dam, or through a gap in the second ridge to the south. Regardless, almost 80% of the material shed off the slopes around the basin is deposited locally, whereas the remaining 20% is redeposited on the incoming section and will be re-accreted.
     

Sedimentology,provenance and geochronology of the upper Cretaceous–lower Eocene western Xigaze forearc basin,southern Tibet

Located on the southern margin of the Lhasa terrane in southern Tibet, the Xigaze forearc basin records Cretaceous to lower Eocene sedimentation along the southern margin of Asia, prior to and during the initial stages of continental collision with the Tethyan Himalaya in the Early Eocene. We present new measured stratigraphic sections, totalling 4.5 km stratigraphic thickness, from a 60 km E–W segment of the western portion of the Xigaze forearc basin, northeast of the Lopu Kangri Range (29.8007° N, 84.91827° E). In addition, we apply U–Pb detrital zircon geochronology to constrain the provenance and maximum depositional ages of investigated strata. Stratigraphic ages range between ca. 88 and ca. 54 Ma and sedimentary facies indicate a shoaling‐upward trend from deep‐marine turbidites to fluvial deposits. Depositional environments of coeval Cretaceous strata along strike include deep‐marine distal turbidites, slope‐apron debris‐flow deposits and marginal marine carbonates. This along‐strike variability in facies suggests an irregular paleogeography of the Asian margin prior to collision. Paleocene–Eocene strata are composed of shallow marine carbonates with abundant foraminifera such as Nummulites‐Discocyclina and Miscellanea‐Daviesina and transition into fluvial deposits dated at ca. 54 Ma. Sandstone modal analyses, conglomerate clast compositions and detrital zircon U–Pb geochronology indicate that forearc detritus in this region was derived solely from the Gangdese magmatic arc to the north. In addition, U–Pb detrital zircon age spectra within the upper Xigaze forearc stratigraphy are similar to those from Eocene foreland basin strata south of the Indus‐Yarlung suture near Sangdanlin, suggesting that the Xigaze forearc was a possible source of Sangdanlin detritus by ca. 55 Ma. We propose a model in which the Xigaze forearc prograded south over the accretionary prism and onto the advancing Tethyan Himalayan passive margin between 58 and 54 Ma, during late stage evolution of the forearc basin and the beginning of collision with the Tethyan Himalaya. The lack of documented forearc strata younger than ca. 51 Ma suggests that sedimentation in the forearc basin ceased at this time owing to uplift resulting from continued continental collision.     

Recent fold growth and drainage development: The Janauri and Chandigarh anticlines in the Siwalik foothills, northwest India

The active growth of a fault-and-thrust belt in frontal zones of Himalaya is a prominent topographical feature, extending 2500 km from Assam to Pakistan. In this paper, kinematical analysis of frontal anticlines and spatial mapping of active faults based on geomorphological features such as drainage pattern development, fault scarps and uplifted Quaternary alluvial fans are presented. We analyse the geomorphic and hydrographic expressions of the Chandigarh and the Janauri active anticlines in the NW India Siwaliks. To investigate the morphological scenario during the folding process, we used spatial imagery, geomorphometric parameters extracted from digital elevation models and fieldwork. Folding between the Beas and Sutlej Rivers gives clear geomorphological evidence of recent fold growth, presumably driven by movements of blind thrust faults. Structural style within the Janauri and Chandigarh anticlines is highly variable (fault-propagation folds, pop-up structures and transfer faults). The approach presented here involves analysis of topography and drainage incision of selected landforms to detect growth of active anticlines and transfer faults. Landforms that indicate active folding above a southwest-dipping frontal thrust and a northeast-dipping back-thrust are described. Along-strike differences in ridge morphology are measured to describe the interaction of river channel patterns with folds and thrust faults and to define history of anticline growth. The evolution of the apparently continuous Janauri ridge has occurred by the coalescence of independent segments growing towards each other. By contrast, systematic drainage basin asymmetry shows that the Chandigarh anticline ridge has propagated laterally from NW to SE.     

Drainage on evolving fold-thrust belts: a study of transverse canyons in the Apennines

Anticlinal ridges of the actively deforming Umbria–Marche Apennines fold-thrust belt are transected by deep gorges, accommodating a drainage pattern which almost completely ignores the presence of pronounced anticlinal mountains. Because the region was below sea level until the folds began to form, simple antecedence cannot explain these transverse canyons. In addition, the fold belt is too young for there to have been a flat-lying cover from which the rivers could have been superposed.
In 1978, Mazzanti & Trevisan proposed an explanation for these gorges which deserves wider recognition. They suggested that the Apennine fold ridges emerged from the sea in sequence, with the erosional debris from each ridge piling up against the next incipient ridge to emerge, gradually extending the coastal plain seaward. The new coastal plain adjacent to each incipient anticline provided a flat surface on which a newly elongated river could cross the fold, positioning it to cut a gorge as the fold grew. Their mechanism is thus a combination of antecedence and superposition in which folds, overlying sedimentary cover and downstream elongations of the rivers all form at the same time.
A study of Apennine drainage, using the sequence of older-to-younger transected Apennine folds as a proxy for the historical evolution of drainage cutting through a single fold, shows that transverse drainage forms when sedimentation dominates at the advancing coastline. Longitudinal drainage forms when uplift dominates, the folds first emerge as offshore islands and the Mazzanti–Trevisan mechanism is suppressed.
Complicating factors include several departures from steady-state growth of the fold-thrust belt, a possible case of precursory submarine drainage, early emergence of anticlinal culminations and the location of several transverse canyons at the structurally highest point along anticlinal axes.     

Integrated provenance record of a forearc basin modified by slab‐window magmatism: detrital‐ zircon geochronology and sandstone compositions of the Paleogene Arkose Ridge Formation,south‐central Alaska

This study presents an integrated provenance record for ancient forearc strata in southern Alaska. Paleocene–Eocene sedimentary and volcanic strata >2000 m thick in the southern Talkeetna Mountains record nonmarine sediment accumulation in a remnant forearc basin. In these strata, igneous detritus dominates conglomerate and sandstone detrital modes, including plutonic and volcanic clasts, plagioclase feldspar, and monocrystalline quartz. Volcanic detritus is more abundant and increases upsection in eastern sandstone and conglomerate. U‐Pb ages of >1600 detrital zircons from 19 sandstone samples document three main populations: 60–48 Ma (late Paleocene–Eocene; 14% of all grains), 85–60 Ma (late Cretaceous–early Paleocene; 64%) and 200–100 Ma (Jurassic–Early Cretaceous; 11%). Eastern sections exhibit the broadest distribution of detrital ages, including a principal population of late Paleocene–Eocene ages. In contrast, central and western sections yield mainly late Cretaceous–early Paleocene detrital ages. Collectively, our results permit reconstruction of individual fluvial drainages oriented transverse to a dissected arc. Specifically, new data suggest: (1) Detritus was eroded from volcanic‐plutonic sources exposed along the arcward margin of the sampled forearc basin fill, primarily Jurassic–Paleocene magmatic‐arc plutons and spatially limited late Paleocene–Eocene volcanic centers; (2) Eastern deposystems received higher proportions of juvenile volcanic detritus through time from late Paleocene–Eocene volcanic centers, consistent with emplacement of a slab window beneath the northeastern part of the basin during spreading‐ridge subduction; (3) Western deposystems transported volcanic‐plutonic detritus from Jurassic–Paleocene remnant arc plutons and local eruptive centers that flanked the northwestern part of the basin; (4) Diagnostic evidence of sediment derivation from accretionary‐prism strata exposed trenchward of the basin fill is lacking. Our results provide geologic evidence for latest Cretaceous–early Paleocene exhumation of arc plutons and marine forearc strata followed by nonmarine sediment accumulation and slab‐window magmatism. This inferred history supports models that invoke spreading‐ridge subduction beneath southern Alaska during Paleogene time, providing a framework for understanding a mature continental‐arc/forearc‐basin system modified by ridge subduction. Conventional provenance models predict reduced input of volcanic detritus to forearc basins during progressive exhumation of the volcanic edifice and increasing exposure of subvolcanic plutons. In contrast, our results show that forearc basins influenced by ridge subduction may record localized increases in juvenile volcanic detritus during late‐stage evolution in response to accumulation of volcanic sequences formed from slab‐window eruptive centers.     

青藏高原考察新发现--帕隆藏布大峡谷

通过多年的考察和室内科学论证,发现认定在雅鲁藏布大峡谷顶端汇流的一级支流———帕隆藏布峡谷也是一条堪称世界级的大峡谷（照片１）。就深度而言,帕隆藏布至少可以排位于尼泊尔王国境内的喀利根德格大峡谷（最深为４４０３ｍ）之后名列世界第三而深于秘鲁的科尔卡大...     

Along‐strike structural linkage and interaction in an active thrust fault system: A case study from the western Sichuan foreland basin,China

Along‐strike structural linkage and interaction between faults is common in various compressional settings worldwide. Understanding the kinematic history of fault interaction processes can provide important constraints on the geometry and evolution of the lateral growth of segmented faults in the fold‐and‐thrust belts, which are important to seismic hazard assessment and hydrocarbon trap development. In this study, we study lateral structural geometry (fault displacement and horizon shortening) of thrust fault linkages and interactions along the Qiongxi anticline in the western Sichuan foreland basin, China, using a high‐resolution 3D seismic reflection dataset. Seismic interpretation suggests that the Qiongxi anticline can be related to three west‐dipping, hard‐linked thrust fault segments that sole onto a regional shallow detachment. Results reveal that the lateral linkage of fault segments limited their development, affecting the along‐strike fault displacement distributions. A deficit between shortening and displacement is observed to increase in linkage zones where complex structural processes occur, such as fault surface bifurcation and secondary faulting, demonstrating the effect of fault linkage process on structural deformation within a thrust array. The distribution of the geometrical characteristics shows that thrust fault development in the area can be described by both the isolated fault model and the coherent fault model. Our measurements show that new fault surfaces bifurcate from the main thrust ramp, which influences both strain distribution in the relay zone and along‐strike fault slip distribution. This work fully describes the geometric and kinematic characteristics of lateral thrust fault linkage, and may provide insights into seismic interpretation strategies in other complex fault transfer zones.     

Ebro Basin continental sedimentation associated with late compressional Pyrenean tectonics(north‐eastern Iberia): controls on basin margin fans and fluvial systems

ABSTRACT This contribution deals with the External Sierras and a part of the foreland Ebro Basin related to the southern Pyrenean thrust front. The structure of the External Sierras consists of a south‐verging thrust system developed from middle Eocene to early Miocene times. Since the end of the early Oligocene, a regional‐scale detachment anticline (the Santo Domingo anticline) developed, folding the original thrust system and creating new thrust units. The molassic fill in this part of the Ebro Basin (Uncastillo Formation) mainly corresponds to an extensive, composite distributary fluvial system, termed the Luna system, which drained the uplifted Gavarnie Unit to the north. Small, marginal alluvial fans originated along the External Sierras and coalesced in the proximal‐middle portions of the Luna system. Three tecto‐sedimentary units (TSU), late Oligocene to early Miocene in age, comprise the Uncastillo Formation. Lateral relationships and areal distribution of lithofacies through time have been used to establish sedimentary models for the marginal alluvial fans and the Luna fluvial system. Their sedimentary evolution was controlled by tectonics affecting the drainage basins, and based on mapping and stratigraphic relationships of the TSU, the temporal succession of the marginal alluvial fans and their relationships with each thrust system in the south Pyrenean front can be shown. Alluvial fan formation evolved through time from west to east, in accord with the progressive eastward growth of the Santo Domingo anticline as a conical fold. The fluvial network of the Luna system appears to have been mainly radial, but near the basin margin its architecture was influenced by the syndepositional Fuencalderas and Uncastillo anticlines developed within the Ebro Basin. These low‐amplitude folds originated by layer‐parallel shearing caused by rotation of the southern flank of the Santo Domingo anticline. Progressive uplift of these anticlines constrained part of the fluvial discharge to synclinal areas parallel to the basin margin; these areas where characterized by meandering sandy channels. At the peripheral tips of the anticlines the channel system flowed basinward.     

Tectonic and sedimentological evolution of the Pliocene–Quaternary basins of Zakynthos island, Greece: case study of the transition from compressional to extensional tectonics

Pliocene–Quaternary basins of the Ionian islands evolved in a complex tectonic setting that evolved from a mid to late Cenozoic compressional zone of the northern external Hellenides to the rapidly extending Pliocene–Quaternary basins of the Peloponnese. The northern limit of the Hellenic Trench marks the junction of these two tectonic regimes. A foreland-propagating fold and thrust system in the northern external Hellenides segmented the former Miocene continental margin basin in Zakynthos and permitted diapiric intrusion of Triassic gypsum along thrust ramps. Further inboard, coeval extensional basins developed, with increasing rates of subsidence from the Pliocene to Quaternary, resulting in four principal types of sedimentation: (1) condensed shelf-sedimentation on the flanks of rising anticlines; (2) coarse-grained sedimentation in restricted basins adjacent to evaporitic diapirs rising along thrust ramps; (3) larger basins between fold zones were filled by extrabasinal, prodeltaic mud and sand from the proto-Acheloos river; (4) margins of subsiding Quaternary basins were supplied at sea-level highstands by distal deltaic muds and at lowstands by locally derived coarse clastic sediment.     

Crustal‐scale fluid flow during the tectonic evolution of the Bighorn Basin (Wyoming,USA)

Stable isotope measurements (O, C, Sr), microthermometry and salinity measurements of fluid inclusions from different fracture populations in several anticlines of the Sevier‐Laramide Bighorn basin (Wyoming, USA) were used to unravel the palaeohydrological evolution. New data on the microstructural setting were used to complement previous studies and refine the fracture sequence at basin scale. The latter provides the framework and timing of fluid migration events across the basin during the Sevier and Laramide orogenic phases. Since the Sevier tectonic loading of the foreland basin until its later involvement into the Laramide thick‐skinned orogeny, three main fracture sets (out of seven) were found to have efficiently enhanced the hydraulic permeability of the sedimentary cover rocks. These pulses of fluid are attested by calcite crystals precipitated in veins from hydrothermal (T > 120 °C) radiogenic fluids derived from Cretaceous meteoric fluids that interacted with the Precambrian basement rocks. Between these events, vein calcite precipitated from formational fluids at chemical and thermal equilibrium with surrounding environment. At basin scale, the earliest hydrothermal pulse is documented in the western part of the basin during forebulge flexuring and the second one is documented in basement‐cored folds during folding. In addition to this East/West diachronic opening of the cover rocks to hydrothermal pulses probably controlled by the tectonic style, a decrease in ^87/86Sr values from West to East suggests a crustal‐scale partially squeegee‐type eastward fluid migration in both basement and cover rocks since the early phase of the Sevier contraction. The interpretation of palaeofluid system at basin scale also implies that joints developed under an extensional stress regime are better vertical drains than joints developed under strike‐slip regime and enabled migration of basement‐derived hydrothermal fluids.     

Late Ordovician,deep‐water gravity‐flow deposits,palaeogeography and tectonic setting,Tarim Basin,Northwest China

The Upper Ordovician in the Tarim Basin contains 5000–7000 m of siliciclastic and calciclastic deep‐water, gravity‐flow deposits. Their depositional architecture and palaeogeographical setting are documented in this investigation based on an integrated analysis of seismic, borehole and outcrop data. Six gravity‐flow depositional–palaeogeomorphological elements have been identified as follows: submarine canyon or deeply incised channels, broad and shallow erosional channels, erosional–depositional channel and levee–overbank complexes, frontal splays‐lobes and nonchannelized sheets, calciclastic lower slope fans and channel lobes or sheets, and debris‐flow complexes. Gravity‐flow deposits of the Sangtamu and Tierekeawati formations comprise a regional transgressive‐regressive megacycle, which can be further classified into six sequences bounded by unconformities and their correlative conformities. A series of incised valleys or canyons and erosional–depositional channels are identifiable along the major sequence boundaries which might have been formed as the result of global sea‐level falls. The depositional architecture of sequences varies from the upper slope to abyssal basin plain. Palaeogeographical patterns and distribution of the gravity‐flow deposits in the basin can be related to the change in tectonic setting from a passive continental margin in the Cambrian and Early to Middle Ordovician to a retroarc foreland setting in the Late Ordovician. More than 3000 m of siliciclastic submarine‐fan deposits accumulated in south‐eastern Tangguzibasi and north‐eastern Manjiaer depressions. Sedimentary units thin onto intrabasinal palaeotopographical highs of forebulge origin and thicken into backbulge depocentres. Sediments were sourced predominantly from arc terranes in the south‐east and the north‐east. Slide and mass‐transport complexes and a series of debris‐flow and turbidite deposits developed along the toes of unstable slopes on the margins of the deep‐water basins. Turbidite sandstones of channel‐fill and frontal‐splay origin and turbidite lobes comprise potential stratigraphic hydrocarbon reservoirs in the basin.     

Outflow of Pacific water from the Chukchi Sea to the Arctic Ocean

Pacific water exits the Chukchi Sea shelf through Barrow Canyon in the east and Herald Canyon in the west,forming an eastward-directed shelfbreak boundary current that flows into the Beaufort Sea.Here we summarize the transformation that the Pacific water undergoes in the two canyons,and describe the characteristics and variability of the resulting sbelfbreak jet,using recently collected summertime hydrographic data and a year-long mooring data set.In both canyons the northward-flowing Pacific winter water switches from the western to the eastern flank of the canyon,interacting with the northward-flowing summer water.In Barrow canyon the vorticity structure of the current is altered,while in Herald canyon a new water mass mode is created.In both instances hydraulic effects are believed to be partly responsible for the observed changes.The shelfbreak jet that forms from the canyon outflows has distinct seasonal configurations,from a bottom-intensified flow carrying cold,dense Pacific water in spring,to a surface-intensified current advecting warm,buoyant water in summer.The current also varies significantly on short timescales,from less than a day to a week.In fall and winter much of this mesoscale variability is driven by storm events,whose easterly winds reverse the current and cause upwelling.Different types of eddies are spawned from the current,which are characterized here using hydrographic and satellite data.     

Experimental modelling of forearc basin development during accretionary wedge growth

We present results of three sand-box experiments that model the association between tectonic accretion and sedimentation in a forearc basin. Experimental sedimentation occurs step by step in the forearc basin during shortening of the sand wedge. In each experiment, the development of the accretionary wedge leads to the formation of a major backthrust zone. This major deformation zone accounts for the thickening in the rear part of the wedge. In natural settings this tectonic bulge dams sediments that are transported toward the trench from mountainous terrain behind the forearc. We test the variation of friction along the déollement and note the following: (1) shortening of a low-friction wedge involves a mechanical balance between forethrusts and backthrust propagation and this balance is recorded by the sedimentary sequence trapped in the forearc basin. Indeed, if most of the movement occurs along the backthrust, the deepening of the basin will be larger and consequently the thickness of the sedimentary sequence will be greater. (2) Such balance does not exist in the case of a high-friction wedge. (3) Variation of friction along the décollement during shortening of the sand wedge leads to modification in the forearc basin filling. Thus, for similar increments of convergence, the sequence deposited in the forearc basin shows relatively larger thickness when the wedge is shortened above a high-friction décollement. We suggest that contraction and thickening in the rear part of the wedge is an efficient mechanism to, initiate and develop a forearc basin. Thus, this kind of basin occurs in convergent settings, without collapse related to local extension or tectonic erosion. They represent a sedimentary trap on a passive basement, bounded by a tectonic bulge. The Quaternary Hikurangi forearc basin, southeast of the North Island of New Zealand, is bounded by two actively uplifting ridges. Thus, this basin is considered to be a possible example of the basins modelled in our experiments, and we suggest that the limit between the basin and the wedge could be a complex backthrust zone.     

Syn‐orogenic fluid flow in the Jaca basin (south Pyrenean fold and thrust belt) from fracture and vein analyses

This study aims at understanding the origin and nature of syn‐orogenic fluid flow in the Jaca basin from the South Pyrenean fold and thrust‐belt, as recorded in calcite and quartz veins of the Sierras Interiores (Spain) and the turbiditic basin, which cover upper Cretaceous to Late Eocene syntectonic deposits. The fracture network consists of a classical pattern of transverse and longitudinal fractures related to Layer Parallel Shortening (LPS) and folding respectively. Veins filled equally about the third of fractures in the carbonate shelf and turbidites. Carbon and oxygen isotopes of calcite veins mostly indicate precipitation from isotopically buffered water, consistent with high water‐rock interaction. In the Sierras Interiores, petrographical observations and fluid inclusion microthermometry are consistent with two distinct stages of precipitation. The first stage is characterized by relatively low Th and low salinities (155–205 °C and 0.5–3.2 wt% eq. NaCl). The second stage, which was characterized both by the formation of mode‐I joints and by mode‐I reactivation of pre‐existing veins, shows higher Th and salinities (215–270 °C and 2.2–5.7 wt% eq. NaCl). Waters recorded in the second stage are interpreted to have interacted with underlying Triassic evaporites and flowed along major thrusts before vein precipitation, which are locally in thermal disequilibrium with host‐rocks. We suggest the transition from a rather closed hydrological system during the first stage of vein formation, interpreted to have occurred during Eaux‐chaudes thrusting (upper Lutetian‐Bartonian), to a more open hydrological system during the second stage, which likely occurred during Gavarnie thrusting (Priabonian‐early Rupelian). Finally, we also document the migration in space and time of hydrothermal pulses along the South Pyrenean Foreland Basin, related to the westward propagation of major thrusts during the Pyrenean orogeny.     

Burial history of Late Neogene sedimentary basins on part of the New Zealand convergent plate margin

Abstract Burial histories of Late Neogene sedimentary basins on the Wairarapa fold and thrust belt of the Hikurangi convergent plate margin (New Zealand) have been deduced from decompacted sedimentary columns and palaeo-waterdepths. These indicate that at least two major cycles of basement subsidence and uplift have occurred since 15 Ma. The older (15-10 Ma) cycle affected outer areas of the forearc. Subsidence, at a minimum rate of 0.5-0.6 mm/yr, was followed by rapid uplift. The subsequent (10 Ma to present) cycle affected a broad area of the inner forearc. Subsidence, at an average rate 0.33 mm/yr, was followed by uplift at an average rate of 0.5-1.5 mm/yr. Vertical movement is continuing, with uplift of the axial greywacke ranges and development of the Wairarapa Depression.
Palinspastic reconstructions of the inner forearc region indicate that basin development was characterized by a see-saw oscillation in basin orientation, with the axis of the basin and direction of basin tilt switching back and forth from east to west through time. A large-scale change in basin orientation took place around 2 Ma when the westernmost part of Wairarapa began to rise on the flanks of the rising Tararua Range, associated with the ramping of the Australian Plate up and over the subducted Pacific Plate. Loading of the forearc is unlikely to have been a significant cause of basement subsidence before this event. Earlier phases of basin development associated with basement subsidence and uplift may be related to a complex interplay of tectonic factors, including the westward migration of the subducted Pacific Plate as it passed beneath southern North Island during Miocene time, episodes of locking and unlocking of parts of the plate interface, and growth of the accretionary prism.     

Migration pathways in the Central North Slope foreland basin, Alaska USA: solute and thermal constraints on fluid flow simulations

The North Slope foreland basin, Alaska, USA is an east–west asymmetrical trough‐shaped basin adjacent to the Brooks Range fold‐thrust mountain belt. Lower Cretaceous age rocks make up much of the sediment fill, including flysch‐like marine turbidites and shales of the Torok and Fortress Mountain formations and marine and sandstones, shales and conglomerates of the overlying Nanushuk group. Lower Cretaceous age rocks were deposited on top of a Palaeozoic and Mesozoic age passive margin sequence. We have conducted numerical simulations of fluid flow driven by topographic recharge in the Central North Slope foreland basin. These simulations are constrained by salinity estimates from well logs, location of oil and gas fields, vitrinite reflectance and heat flow measurements. Our model results indicate that there are two south to north pathways for fluid migration. The primary pathway for fluid movement is downward through the Fortress Mountain formation, then upwards along the interface between the Fortress Mountain and Torok Formation and finally northward through the permeable Nanushuk group. A smaller mass of groundwater moves along sands below the Torok formation and into offshore sediments north of Alaska. Very little meteoric water enters the underlying Palaeozoic rocks in our simulations, which could explain the presence of deep saline pore waters. Our results also show that permafrost is a primary control on the pathway and rate of fluid flow by controlling the distribution of surface recharge and discharge. For example, areas of high heat flow and low saline waters along the arctic coast may represent upward groundwater discharge because of the absence of permafrost. As surface temperatures were warmer in the Miocene, the absence of permafrost would produce a more local fluid circulation pattern and less transfer of heat energy from south to north.     

Morphotectonics and incision of the Kaoping submarine canyon, SW Taiwan orogenic wedge

The Kaoping submarine canyon developed on the frontal orogenic wedge off SW Taiwan and is the largest one among others. The canyon begins at the mouth of the Kaoping River, crosses the narrow shelf and broad slope region, and finally merges into the northern Manila Trench for a distance of about 260 km. Using reflection seismic sections and bathymetric mapping this paper reveals the geomorphic characteristics of the Kaoping Canyon strongly related to structural and sedimentary processes. The combined morphometry statistics analysis, seismic interpretations of structures and examinations of detailed bathymetric charts indicate that regional canyon morphology is strongly linked to intrusions of mud diapirs in the upper reach of the canyon and thrust faulting in the middle and lower reaches which produce two prominent morphological breaks of the course of the Kaoping Canyon with two sharp bends. Although excavation of floor and enlargement of the Kaoping Canyon are mainly attributed to downslope erosion of seabed, incision of this canyon is also strongly complicated by mud diapiric intrusions (upper reach), westward thrust faults (middle reach), and regional base level tilting (lower reach). The resultant cross-sectional morphology along the Kaoping Canyon changes considerably, ranging from U-shaped, broad V-shaped, to irregular troughs. The Kaoping Canyon may be served as a variant of canyon model of active margins with a distinct morphology of two sharp bends along the canyon course associated with structure deformation.     

Initiation and early evolution of a forearc basin: Georgia Basin,Canada

The lower Nanaimo Group was deposited in the (forearc) Georgia Basin, Canada and records the basin's initiation and early depositional evolution. Nanaimo Group strata are subdivided into 11 lithostratigraphic units, which are identified based on lithology, paleontology, texture and position relative to both the basal nonconformity and to each other. Significant topography on the basal nonconformity, however, has resulted in assignment of lithostratigraphic units that are not time correlative, and hence, cannot reliably be used to accurately reconstruct basin evolution. Herein, we present a sequence stratigraphic framework for lower Nanaimo Group strata in the Comox Sub-Basin (northern Georgia Basin) that integrates both facies analysis and maximum depositional ages (MDAs) derived from detrital zircon. This stratigraphic framework is used to define significant sub-basin-wide surfaces that bound depositional units and record the evolution of the basin during its early stages of development. Seven distinct depositional phases are identified in the lower 700 m of the lower Nanaimo Group. Depositional phases are separated by marine flooding surfaces, regressive surfaces, or disconformities. The overall stratigraphy reflects net transgression manifested as an upwards transition from braided fluvial conglomerates to marine mudstones. Transgression was interrupted by periods of shoreline progradation, and both facies analysis and MDAs reveal a disconformity in the lowermost part of the Nanaimo Group in the Comox Sub-Basin. Stratigraphic reconstruction of the Comox Sub-Basin reveals two dominant depocenters (along depositional strike) for coarse clastics (sandstones and conglomerates) during early development of the Georgia Basin. The development and position of these depocenters is attributed to subduction/tectonism driving both subsidence in the north-northwest and uplift in the central Comox Sub-Basin. Our work confirms that in its earliest stages of development, the Georgia Basin evolved from an underfilled, ridged forearc basin that experienced slow and stepwise drowning to a shoal-water ridged forearc basin that experienced rapid subsidence. We also propose that the Georgia Basin is a reasonable analogue for ridged forearc basins globally, as many ridged forearcs record similar depositional histories during their early evolution.