Episodic wood loading in a mountainous neotropical watershed

The Upper Rio Chagres drains 414 km² of steep, mountainous terrain in central Panama. A tropical air mass thunderstorm on 10 July 2007 produced a flood across the basin that peaked at 720 m³ s^− 1 at a headwaters gage draining 17.5 km² and 1710 m³ s^− 1 at a downstream gage draining 414 km². The storm also triggered numerous landslides in the upper basin, which facilitated the formation of large logjams along portions of the channel where transport capacity of wood was reduced by a change in channel geometry such as a bend or channel expansion. During field work in February 2008, we characterized three jams with surface areas of 400–2450 m²; two of these jams resulted in storage of substantial (1100–8200 m³) sediment wedges upstream. We returned to these sites in March 2009 to document changes in the logjams and sediment storage. Drawing on observations made in the basin since 2002, and site visits during 2008 and 2009, we suggest that jams such as these last two years or less. We propose that wood dynamics in the Upper Chagres alternate between brief periods of moderate wood load in the form of large logjams and much longer periods of essentially no wood load, a situation that contrasts with the more consistent wood loads in catchments of similar size in temperate environments and with limited studies of more consistent wood load in tropical catchments with no landslides.     

Occurrence of soil erosion after repeated experimental fires in a Mediterranean environment

In the Mediterranean area, forest fires have become a first-order environmental problem. Increased fire frequency progressively reduces ecosystem recovery periods. The fire season, usually followed by torrential rains in autumn, intensifies erosion processes and increases desertification risk. In this work, the effect of repeated experimental fires on soil response to water erosion is studied in the Permanent Field Station of La Concordia, Valencia, Spain. In nine 80 m² plots (20 m long × 4 m wide), all runoff and sediment produced were measured after each rainfall event. In 1995, two fire treatments with the addition of different biomass amounts were applied. Three plots were burned with high fire intensity, three with moderate intensity, and three were unburned to be used as control. In 2003, the plots with the fire treatments were burned again with low fire intensities. During the 8-year interval between fires, plots remained undisturbed, allowing regeneration of the vegetation–soil system. Results obtained during the first 5 months after both fire experiments show the high vulnerability of the soil to erosion after a repeated fire. For the burned plots, runoff rates increased three times more than those of 1995, and soil losses increased almost twice. The highest sediment yield (514 g m^− 2) was measured in 2003, in the plots of the moderate fire intensity treatment, which yielded only 231 g m^− 2 of sediment during the corresponding period in 1995. Runoff yield from the control plots did not show significant temporal changes, while soil losses decreased from 5 g m^− 2 in the first post-fire period to 0.7 g m^− 2 in the second one.     

Holocene sediment budgets in two river catchments in the Southern Upper Rhine Valley, Germany

The Holocene sediments of two catchments in the southern Upper Rhine valley have been quantified as part of the German LUCIFS Programme (RheinLUCIFS), which aims to quantify sediment fluxes in the Rhine catchment since the onset of agriculture in the Neolithic about 7500 years ago.The spatial distribution of the alluvial and colluvial sediments was derived using geological maps, with information on the thickness of these sediments from various sources including auger profiles and data from excavations. The sediments were subdivided into characteristic sedimentary storage types according to the different types of landscapes. For each of the sedimentary storage types an average thickness was assessed so that an integral sediment balance for the Holocene could be derived.For the different types of landscapes in the study area, 32 Holocene sedimentary storage types were determined, 21 in the Elz catchment (1500 km²) and 11 in the Möhlin catchment (230 km²). By adding up the sediment volumes of all single sedimentary storage types the total Holocene sediment volumes for the two catchments were calculated. Erosion depths were determined by dividing the sediment volumes through the potential erosion areas (slope > 2%) and by assuming a sediment delivery ratio (SDR) between 0 and 0.4. The total erosion for the potential erosion areas during the Holocene was calculated as 31–61 cm in the Elz catchment and 44–79 cm in the Möhlin catchment.     

Terrace aggradation during the 1978 flood on Powder River, Montana, USA

Flood processes no longer actively increase the planform area of terraces. Instead, lateral erosion decreases the area. However, infrequent extreme floods continue episodic aggradation of terraces surfaces. We quantify this type of evolution of terraces by an extreme flood in May 1978 on Powder River in southeastern Montana. Within an 89-km study reach of the river, we (1) determine a sediment budget for each geomorphic feature, (2) interpret the stratigraphy of the newly deposited sediment, and (3) discuss the essential role of vegetation in the depositional processes.Peak flood discharge was about 930 m³ s^− 1, which lasted about eight days. During this time, the flood transported 8.2 million tons of sediment into and 4.5 million tons out of the study reach. The masses of sediment transferred between features or eroded from one feature and redeposited on the same feature exceeded the mass transported out of the reach. The flood inundated the floodplain and some of the remnants of two terraces along the river. Lateral erosion decreased the planform area of the lower of the two terraces (~ 2.7 m above the riverbed) by 3.2% and that of the higher terrace (~ 3.5 m above the riverbed) by 4.1%. However, overbank aggradation, on average, raised the lower terrace by 0.16 m and the higher terrace by 0.063 m.Vegetation controlled the type, thickness, and stratigraphy of the aggradation on terrace surfaces. Two characteristic overbank deposits were common: coarsening-upward sequences and lee dunes. Grass caused the deposition of the coarsening-upward sequences, which had 0.02 to 0.07 m of mud at the base, and in some cases, the deposits coarsened upwards to coarse sand on the top. Lee dunes, composed of fine and very fine sand, were deposited in the wake zone downstream from the trees. The characteristic morphology of the dunes can be used to estimate some flood variables such as suspended-sediment particle size, minimum depth, and critical shear velocity. Information about depositional processes during extreme floods is rare, and therefore, the results from this study aid in interpreting the record of terrace stratigraphy along other rivers.     

Cosmogenic nuclide budgeting of floodplain sediment transfer

Cosmogenic nuclides produced in quartz may either decay or accumulate while sediment is moved through a river basin. A change in nuclide concentration resulting from storage in a floodplain is potentially important in large drainage basins in which sediment is prone to repeated burial and remobilization as a river migrates through its floodplain. We have modeled depth- and time-dependent cosmogenic nuclide concentration changes for ¹⁰Be, ²⁶Al, and ¹⁴C during sediment storage and mixing in various active floodplain settings ranging from confined, shallow rivers with small floodplains to foreland-basin scale floodplains traversed by deep rivers. Floodplain storage time, estimated from channel migration rates, ranges from 0.4 kyr for the Beni River basin (Bolivia) to 7 kyr for the Amazon River basin, while floodplain storage depth, estimated from channel depth, ranges from 1 to 25 m.For all modeled active floodplain settings, the long-lived nuclides ¹⁰Be and ²⁶Al show neither significant increase in nuclide concentration from irradiation nor decrease from decay. We predict a hypothetical response time after which changes in ¹⁰Be or ²⁶Al concentrations become analytically resolvable. This interval ranges from 0.07 to 2 Myr and exceeds in all cases the typical residence time of sediment in a floodplain. Due to the much shorter half life of ¹⁴C, nuclide concentrations modeled for the in situ-produced variety of this nuclide are, however, sensitive to floodplain storage on residence times of < 20 kyr.The cosmogenic nuclide composition of old deposits in currently inactive floodplains that have been isolated for periods of millions of years from the river that once deposited them is predicted to either increase or decrease in ¹⁰Be and ²⁶Al concentration, depending on the depositional depth. These conditions can be evaluated using the ²⁶Al/¹⁰Be ratio that readily discloses the depth and duration of storage.We illustrate these models with examples from the Amazon basin. As predicted, modern bedload collected from an Amazon tributary, the Bolivian Beni River, shows no systematic change in nuclide concentration as sediment is moved through 500 km of floodplain by river meandering. In contrast, in the central Amazon floodplain currently untouched by the modern river system, low ²⁶Al/¹⁰Be ratios account for minimum burial depths of 5 to 10 m for a duration of > 5 Myr.The important result of this analysis is that in all likely cases of active floodplains, cosmogenic ¹⁰Be and ²⁶Al concentrations remain virtually unchanged over the interval sediment usually spends in the basin. Thus, spatially-averaged denudation rates of the sediment-producing area can be inferred throughout the entire basin, provided that nuclide production rates are scaled for the altitudes of the sediment-producing area only, because floodplain storage does not modify nuclide concentrations introduced from the sediment source area.     

Sediment budget analysis of slope–channel coupling and in-channel sediment storage in an upland catchment, southeastern Australia

Slope–channel coupling and in-channel sediment storage can be important factors that influence sediment delivery through catchments. Sediment budgets offer an appropriate means to assess the role of these factors by quantifying the various components in the catchment sediment transfer system. In this study a fine (< 63 µm) sediment budget was developed for a 1.64-km² gullied upland catchment in southeastern Australia. A process-based approach was adopted that involved detailed monitoring of hillslope and bank erosion, channel change, and suspended sediment output in conjunction with USLE-based hillslope erosion estimation and sediment source tracing using ¹³⁷Cs and ²¹⁰Pb_ex. The sediment budget developed from these datasets indicated channel banks accounted for an estimated 80% of total sediment inputs. Valley floor and in-channel sediment storage accounted for 53% of inputs, with the remaining 47% being discharged from the catchment outlet. Estimated hillslope sediment input to channels was low (5.7 t) for the study period compared to channel bank input (41.6 t). However an estimated 56% of eroded hillslope sediment reached channels, suggesting a greater level of coupling between the two subsystems than was apparent from comparison of sediment source inputs. Evidently the interpretation of variability in catchment sediment yield is largely dependent on the dynamics of sediment supply and storage in channels in response to patterns of rainfall and discharge. This was reflected in the sediment delivery ratios (SDR) for individual measurement intervals, which ranged from 1 to 153%. Bank sediment supply during low rainfall periods was reduced but ongoing from subaerial processes delivering sediment to channels, resulting in net accumulation on the channel bed with insufficient flow to transport this material to the catchment outlet. Following the higher flow period in spring of the first year of monitoring, the sediment supplied to channels during this interval was removed as well as an estimated 72% of the sediment accumulated on the channel bed since the start of the study period. Given the seasonal and drought-dependent variability in storage and delivery, the period of monitoring may have an important influence on the overall SDR. On the basis of these findings, this study highlights the potential importance of sediment dynamics in channels for determining contemporary sediment yields from small gullied upland catchments in southeastern Australia.     

Quaternary landscape evolution and erosion rates for an intramontane Neogene basin (Guadix–Baza basin, SE Spain)

The landscape evolution in Neogene intramontane basins is a result of the interaction of climatic, lithologic, and tectonic factors. When sedimentation ceases and a basin enters an erosional stage, estimating erosion rates across the entire basin can offer a good view of landscape evolution. In this work, the erosion rates in the Guadix–Baza basin have been calculated based on a volumetric estimate of sediment loss by river erosion since the Late Pleistocene. To do so, the distribution of a glacis surface at ca. 43 kyr, characterised by a calcrete layer that caps the basin infilling, has been reconstructed. To support this age, new radiometric data of the glacis are presented. The volume of sediment loss by water erosion has been calculated for the entire basin by comparing the reconstructed geomorphic surface and the present-day topography. The resulting erosion rates vary between 4.28 and 6.57 m³ ha^− 1 yr^− 1, and are the consequence of the interaction of climatic, lithologic, topographic, and tectonic factors. Individual erosion rates for the Guadix and Baza sub-basins (11.80 m³ ha^− 1 yr^− 1 and 1.77 m³ ha^− 1 yr^− 1 respectively) suggest different stages of drainage pattern evolution in the two sub-basins. We attribute the lower values obtained in the Baza sub-basin to the down-throw of this sub-basin caused by very recent activity along the Baza fault.     

Last glacial aggradation and postglacial sediment production from the non-glacial Waipaoa and Waimata catchments, Hikurangi Margin, North Island, New Zealand

The sediment flux generated by postglacial channel incision has been calculated for the 2150 km², non-glacial, Waipaoa catchment located on the tectonically active Hikurangi Margin, eastern North Island, New Zealand. Sediment production both at a sub-catchment scale and for the Waipaoa catchment as a whole was calculated by first using the tensioned spline method within ARC MAP to create an approximation of the aggradational Waipaoa-1 surface (contemporaneous with the Last Glacial Maximum), and second using grid calculator functions in the GIS to subtract the modern day surface from the Waipaoa-1 surface. The Waipaoa-1 surface was mapped using stereo aerial photography, and global positioning technology fixed the position of individual terrace remnants in the landscape. The recent discovery of Kawakawa Tephra within Waipaoa-1 aggradation gravels in this catchment demonstrates that aggradation was coincidental with or began before the deposition of this 22 600 ¹⁴C-year-old tephra and, using the stratigraphic relationship of Rerewhakaaitu Tephra, the end of aggradation is dated at ca 15 000 ¹⁴C years (ca 18 000 cal. years BP). The construction of the Waipaoa-1 terrace is considered to be synchronous and broadly correlated with aggradation elsewhere in the North Island and northern South Island, indicating that aggradation ended at the same time over a wide area. Subsequent downcutting, a manifestation of base-level lowering following a switch to postglacial incision at the end of glacial-age aggradation, points to a significant Southern Hemisphere climatic warming occurring soon after ca 15 000 ¹⁴C years (ca 18 000 cal. years BP) during the Older Dryas interval. Elevation differences between the Waipaoa-1 (c.15 ka) terrace and the level of maximum channel incision (i.e. before aggradation since the turn of the 20th century) suggest about 50% of the topographic relief within headwater reaches of the Waipaoa catchment has been formed in postglacial times. The postglacial sediment flux generated by channel incision from Waipaoa catchment is of the order of 9.5 km³, of which ~ 6.6 km³ is stored within the confines of the Poverty Bay floodplain. Thus, although the postglacial period represented a time of high terrigenous sediment generation and delivery, only ~ 30% of the sediment generated by channel incision from Waipaoa catchment probably reached the marine shelf and slope of the Hikurangi Margin during this time. The smaller adjacent Waimata catchment probably contributed an additional 2.6 km³ to the same depocentre to give a total postglacial sediment contribution to the shelf and beyond of ~ 5.5 km³. Sediment generated by postglacial channel incision represents only ~ 25% of the total sediment yield from this landscape with ~ 75% of the estimated volume of the postglacial storage offshore probably derived from hillslope erosion processes following base-level fall at times when sediment yield from these catchments exceeded storage.     

Development of gullies and sediment production in the black soil region of northeastern China

Gully erosion is an important environmental hazard in the black soil region of northeastern China. It is a primary sediment source in the region which needs appropriate soil conservation practices. Gully incision in rolling hills typical of this region was monitored using real-time kinematic GPS to assess the rates of gully development and the resultant sediment production. From 2002 to 2005, gully heads in the study area retreated between 15.4 and 33.5 m, giving an average retreat rate of 8.4 m yr^− 1. Field measurements showed that total sediment production due to gully erosion during the three years ranged between 257 and 1854 m³ yr^− 1, which is equivalent to 326 to 2355 t yr^− 1, with gully-head retreat accounting for 0 to 21.7% (4.4% in average). The sediment delivery ratio was especially high during the summer rainy season (56% in average). Sediment production by ephemeral gullies and permanent gullies was 1.5 times greater than that from surface erosion. Gully heads retreated faster in the spring freeze–thaw period than in the summer. The stage of gully development could be identified based on short-term changes in the gully erosion rate.     

Environmental factors controlling spatial variation in sediment yield in a central Andean mountain area

A large spatial variability in sediment yield was observed from small streams in the Ecuadorian Andes. The objective of this study was to analyze the environmental factors controlling these variations in sediment yield in the Paute basin, Ecuador. Sediment yield data were calculated based on sediment volumes accumulated behind checkdams for 37 small catchments. Mean annual specific sediment yield (SSY) shows a large spatial variability and ranges between 26 and 15,100 Mg km^− 2 year^− 1. Mean vegetation cover (C, fraction) in the catchment, i.e. the plant cover at or near the surface, exerts a first order control on sediment yield. The fractional vegetation cover alone explains 57% of the observed variance in ln(SSY). The negative exponential relation (SSY = a × e^{−b C}) which was found between vegetation cover and sediment yield at the catchment scale (10³–10⁹ m²), is very similar to the equations derived from splash, interrill and rill erosion experiments at the plot scale (1–10³ m²). This affirms the general character of an exponential decrease of sediment yield with increasing vegetation cover at a wide range of spatial scales, provided the distribution of cover can be considered to be essentially random. Lithology also significantly affects the sediment yield, and explains an additional 23% of the observed variance in ln(SSY). Based on these two catchment parameters, a multiple regression model was built. This empirical regression model already explains more than 75% of the total variance in the mean annual sediment yield. These results highlight the large potential of revegetation programs for controlling sediment yield. They show that a slight increase in the overall fractional vegetation cover of degraded land is likely to have a large effect on sediment production and delivery. Moreover, they point to the importance of detailed surface vegetation data for predicting and modeling sediment production rates.     

Deriving hillslope sediment budgets in wildfire-affected forests using fallout radionuclide tracers

Information on post-fire sediment and nutrient redistribution is required to underpin post-fire catchment management decisions. Fallout radionuclide budgets (²¹⁰Pb_xs, ¹³⁷Cs and ⁷Be) were derived to quantify soil redistribution and sediment yield in forested terrain following a moderately severe wildfire in a small (89 ha) water supply catchment in SE Australia. Application of these techniques in burnt terrain requires careful consideration of the partitioning of radionuclides between organic and mineral soil components. Beryllium-7 and ²¹⁰Pb_xs were shown to be closely associated with ash, litter and soil organic matter whereas ¹³⁷Cs was more closely associated with subsurface coarse mineral soil. Comparison of the three tracer budgets indicated that the dominant sediment source areas were ridgetops and steep valley sideslopes, from which burnt surface material was conveyed to the stream network via pre-existing gullies. Erosion was predominantly driven by sheetwash, enhanced by soil water repellency, and modified by bioturbation which both supplies subsurface sediment and provides sinks for erosive overland flow. Footslope and riparian zones were not important sediment source areas. The estimated event-based (wildfire and subsequent rainfall) sediment yield is 58 ± 25 t km^− 2, based on fallout ⁷Be measurements. The upper estimate of total particulate phosphorus yield (0.70 kg ha^− 1) is more than 10 times that at equivalent unburnt sites. This illustrates that, soon after fire, burnt eucalypt forest can produce nutrient loads similar to those of agricultural catchments. The tracer budgets indicate that wildfire is an important control on sediment and phosphorus inputs to the stream network over the decadal timeframe and the pulsed nature of this release is an important concern for water quality management.     

Prolonged impact of earthquake-induced landslides on sediment yield in a mountain watershed: The Tanzawa region, Japan

To determine for how long a landslide affects sediment discharge, the sediment yields of 15 check-dam basins were compared with the time series of landslide distributions in a mountain basin in the Tanzawa region, central Japan. The distribution of sediment yield was quantitatively estimated from deposition in the sediment pools of check dams. The relationship between the landslide history and sediment discharge in the Nakagawa River basin was examined for an approximately 80-year period. Two major landslide events occurred during this period: the 1923 Kanto Earthquake and the 1972 disaster caused by heavy rainfall. The resulting trend in sediment discharge of the whole basin, estimated using reservoir sedimentation in the Miho Dam at its base, was nearly constant, with high sediment discharge (2897 m³ km^− 2 yr^− 1) in the intervening quarter-century, despite the recovery of vegetation on landslide areas in this period. Comparisons of the landslide distributions resulting from the two disasters, the sediment yields of check-dam basins, and the sediment discharge of the whole basin indicate that recent sediment discharge contains landslide debris that was originated by the Kanto Earthquake that occurred over 80 years ago. Thus, to understand high sediment discharge, it is essential to investigate not only the current basin condition and recent events, but also the landslide history of the basin for at least the previous 100 years.     

Sedimentary impacts from landslides in the Tachia River Basin, Taiwan

A case study of coseismic landslides and post-seismic sedimentary impacts of landslides due to rainfall events was conducted in the Tachia River basin, Taichung County, central Taiwan. About 3000 coseismic landslides occurred in the basin during the M_L 7.3 Chi-Chi earthquake in 1999. The deposits from these landslides provided material for numerous debris flows induced by subsequent rainfall events. The estimated 4.1 × 10⁷ m³ of landslide debris produced in the upland area caused sediment deposition in riverbeds, and flash floods inundated downstream areas with sediment during torrential rains. The landslide frequency-size distributions for the coseismic landslides and the subsequent rainfall-induced landslides were analyzed to determine the sediment budgets of the post-seismic geomorphic response in the landslide-dominated basin. Both the coseismic and the rainfall-induced landslides show a power–law frequency-size distribution with a rollover. It was found that the rainfall-induced landslide magnitude was smaller than the coseismic one, and that both have comparable negative scaling exponents in cumulative form, of about − 2.0 for larger landslides (> 10^− 2 km²). This may be attributed to ongoing movement or reactivation of old landslides, and a natural stabilisation of small landslides between 10^− 4 and 10^− 2 km². It is proposed that the characteristics of geological formations and rainfall as well as changes in landslide area are reflected in the power–law distribution.     

Relationships between mesoscale morphological units, stream hydraulics and Chinook salmon (Oncorhynchus tshawytscha) spawning habitat on the Lower Yuba River, California

An expert-based approach was used to identify 10 morphological unit types within a reach of the gravel bed, regulated Yuba River, California, that is heavily utilized by spawning Chinook salmon (Oncorhynchus tshawytscha). Analysis of these units was carried out using two-dimensional hydrodynamic modeling, field-based geomorphic assessment, and detailed spawning surveying. Differently classified morphological units tended to exhibit discrete hydraulic signatures. In most cases, the Froude number adequately differentiated morphological units, but joint depth–velocity distributions proved the most effective hydraulic classification approach. Spawning activity was statistically differentiated at the mesoscale of the morphological unit. Salmon preferred lateral bar, riffle, and riffle entrance units. These units had moderately high velocity (unit median > 0.45 m s^− 1) and low depth (unit median < 0.6 m), but each exhibited a unique joint depth–velocity distribution. A large proportion of redds (79%) were associated with conditions of convective flow acceleration at riffle and riffle entrance locations. In addition to reflecting microhabitat requirements of fish, it was proposed that the hydraulic segregation of preferred from avoided or tolerated morphological units was linked to the mutual association of specific hydraulic conditions with suitable caliber sediment that promotes the provision and maintenance of spawning habitat.     

Temporal variations in the specific stream power and total energy expenditure of a monsoonal river: The Tapi River, India

In this study, an attempt has been made to evaluate the temporal variations in specific stream power and the total energy available for geomorphic work during the monsoon season for the Tapi River, in central India. Continuous daily discharge data (1978–1990), hydraulic geometry equations and the relationship between discharge and water surface slope were used to compute the daily specific stream power (ω) for the Savkheda gauging site in the lower Tapi Basin. The total amount of energy generated by all the monsoon flows was estimated by integrating the area under the ω-graph derived for the monsoon season.The analyses of the 13-year daily discharge data reveal that the average and maximum ω values range from 4–20 W m^{− 2}, and 22–964 W m^{− 2} respectively. Specific stream power duration curve derived for the site shows that for 25% of the time the power per unit area is > 10 W m^{− 2}. Furthermore, unit stream power was found to be above the Williams' [Williams, G.P., 1983. Paleohydrological methods and some examples from Swedish fluvial environments. I. Cobble and boulder deposits. Geografiska Annaler 65A, 227–243.] threshold of pebble-movement (1.5 W m^{− 2}), cobble-movement (16 W m^{− 2}) and boulder-movement (90 W m^{− 2}) for 71%, 15% and 2% of the time, respectively. Computations further indicate that the total amount of energy generated by the flows during the monsoon season is in the range of 37 MJ (deficit monsoon years) to 256 MJ (excess monsoon and/or flood years). Large floods have one-third share in the total monsoon energy expenditure. In the absence of appropriate data on the yearwise geomorphic effects, the geomorphic work was evaluated in terms of the total suspended sediment load transported. The total monsoon sediment load is strongly related to the total monsoon energy. The results of the study indicate that the average flow competence and capacity are remarkably higher during wetter monsoon seasons and flood years than during the shorter and drier monsoon seasons.The present analyses demonstrate that the flows are geomorphically effective for a greater part of the monsoon season, except during the deficient monsoon years, and there is little doubt that large-magnitude floods are effective agents of geomorphic change in monsoonal rivers.     

Suspended sediment and Cs fluxes during the exceptional December 2003 flood in the Rhone River, southeast France

At the beginning of December 2003, one of the biggest floods for at least 150 yr was recorded on the Rhone River. In the lower part of the river, the peak flood reached 11,000 m³ s⁻¹. The geomorphological and radioecological consequences of such an event were investigated downstream all the nuclear installations by using measured and calculated fluxes and the total export of suspended sediment and associated ¹³⁷Cs. Results pointed out the major role played by large floods in the annual suspended sediment load, as 3.70 × 10⁶ tons of silts, 0.85 × 10⁶ tons of sands, and 0.84 × 10⁶ tons of clays were transferred towards the coastal environment. Nevertheless, these solid loads were found to be lower than those expected as regards the liquid discharge reached during this event and suggested that previous floods that occurred on the river and on its main tributaries during the last decade have probably led to the removal of available sediment from the channels and their banks. Besides, the ¹³⁷Cs activity measured within the suspended load was estimated at 14.9 ± 0.4 Bq kg⁻¹, which is a level characteristic of the suspended sediments from the Rhone catchment area and demonstrated that nuclear installations located along the Rhone valley did not significantly contribute to any increase in ¹³⁷Cs activity in the water during the flood. The total ¹³⁷Cs particulate export amounted to 77 ± 17 GBq and was mainly associated with the silt fraction that contributes to around 70% of the total ¹³⁷Cs export.     

Hydraulic and sedimentary processes causing anastomosing morphology of the upper Columbia River, British Columbia, Canada

The upper Columbia River, British Columbia, Canada, shows typical anastomosing morphology — multiple interconnected channels that enclose floodbasins — and lateral channel stability. We analysed field data on hydraulic and sedimentary processes and show that the anastomosing morphology of the upper Columbia River is caused by sediment (bedload) transport inefficiency, in combination with very limited potential for lateral bank erosion because of very low specific stream power (≤ 2.3 W/m²) and cohesive silty banks. In a diagram of channel type in relation to flow energy and median grain size of the bed material, data points for the straight upper Columbia River channels cluster separately from the data points for braided and meandering channels. Measurements and calculations indicate that bedload transport in the anastomosing reach of the upper Columbia River decreases downstream. Because of lateral channel stability no lateral storage capacity for bedload is created. Therefore, the surplus of bedload leads to channel bed aggradation, which outpaces levee accretion and causes avulsions because of loss of channel flow capacity. This avulsion mechanism applies only to the main channel of the system, which transports 87% of the water and > 90% of the sediment in the cross-valley transect studied. Because of very low sediment transport capacity, the morphological evolution of most secondary channels is slow. Measurements and calculations indicate that much more bedload is sequestered in the relatively steep upper anastomosing reach of the upper Columbia River than in the relatively gentle lower anastomosing reach. With anastomosing morphology and related processes (e.g., crevassing) being best developed in the upper reach, this confirms the notion of upstream rather than downstream control of upper Columbia River anastomosis.     

The geomorphic function and characteristics of large woody debris in low gradient rivers, coastal Maine, USA

The role, function, and importance of large woody debris (LWD) in rivers depend strongly on environmental context and land use history. The coastal watersheds of central and northern Maine, northeastern U.S., are characterized by low gradients, moderate topography, and minimal influence of mass wasting processes, along with a history of intensive commercial timber harvest. In spite of the ecological importance of these rivers, which contain the last wild populations of Atlantic salmon (Salmo salar) in the U.S., we know little about LWD distribution, dynamics, and function in these systems. We conducted a cross-basin analysis in seven coastal Maine watersheds, documenting the size, frequency, volume, position, and orientation of LWD, as well as the association between LWD, pool formation, and sediment storage. In conjunction with these LWD surveys, we conducted extensive riparian vegetation surveys. We observed very low LWD frequencies and volumes across the 60 km of rivers surveyed. Frequency of LWD ≥ 20 cm diameter ranged from 15–50 pieces km^− 1 and wood volumes were commonly < 10–20 m³ km^− 1. Moreover, most of this wood was located in the immediate low-flow channel zone, was oriented parallel to flow, and failed to span the stream channel. As a result, pool formation associated with LWD is generally lacking and < 20% of the wood was associated with sediment storage. Low LWD volumes are consistent with the relatively young riparian stands we observed, with the large majority of trees < 20 cm DBH. These results strongly reflect the legacy of intensive timber harvest and land clearing and suggest that the frequency and distribution of LWD may be considerably less than presettlement and/or future desired conditions.     

Large rockslides in the Southern Central Andes of Chile (32–34.5°S): Tectonic control and significance for Quaternary landscape evolution

The distribution and age of large (> 0.1 km²) Pliocene to recent rockslides in the Chilean Cordillera Principal (32–34.5 S), the Southern Central Andes, has been analyzed to determine the rockslide triggering mechanisms and impact on regional landscape evolution. Most of the rockslides appear in the western Cordillera Principal and cluster along major geological structures. Variographic analyses show spatial correlation between rockslides, geological structures and shallow seismicity. A relative chronosequence was calibrated with existing ¹⁴C and ⁴⁰Ar/³⁹Ar dates and new cosmogenic nuclide exposure ages for selected rockslides. Rockslide-induced sediment yield was estimated with empirical relations for rockslide area distributions. Throughout the Quaternary, rockslides have delivered sediment to streams at rates equivalent to denudation rates of 0.10 ±0.06 mm a^− 1, while estimates using short term (20 a) seismicity records are 0.3_− 0.2^+ 0.6 mm a^− 1. The estimates of sediment transfer and the spatial distribution of rockslides reflect a landscape in which tectonic and geological controls on denudation are more significant than climate.     

Suspended sediment transport in a highly erodible catchment: The River Isábena (Southern Pyrenees)

Understanding and quantifying sediment load is important in catchments draining highly erodible materials that eventually contribute to siltation of downstream reservoirs. Within this context, the suspended sediment transport and its temporal dynamics have been studied in the River Isábena (445 km², south-central Pyrenees, Ebro basin) by means of direct sampling and turbidity recording during a 3-year dry period. The average flood-suspended sediment concentration was 8 g l^− 1, with maximum instantaneous values above 350 g l^− 1. The high scatter between discharge and suspended sediment concentrations (up to five orders of magnitude) has not permitted the use of rating curve methods to estimate the total load. Interpolation techniques yielded a mean annual sediment load of 184,253 t y^− 1 for the study period, with a specific yield of 414 t km^− 2 y^− 1. This value resembles those reported for small torrents in nearby mountainous environments and is the result of the high connectivity between the badland source areas and stream courses, a fact that maximises sediment conveyance through the catchment. Floods dominated the sediment transport and yield. However, sediment transport was more constant through time than that observed in Mediterranean counterparts; this can be attributed to the role of base flows that entrain fine sediment temporarily stored in the channel and force the river to carry high sediment concentrations (i.e., generally in the order of 0.5 g l^− 1), even under minimum flow conditions.