共查询到15条相似文献,搜索用时 156 毫秒
1.
2.
3.
4.
5.
开孔沉箱是将传统沉箱的前壁开孔,使沉箱前的入射波浪与反射波浪非同相位叠加,达到消能目的。消浪室是开孔沉箱的重要特征结构,其宽度对开孔沉箱的消浪性能具有重要影响。针对可渗明基床开孔沉箱,赋予消浪室宽度以较大的变化范围,开展专项物模试验,研究探讨了在规则波与不规则波作用下,相对消浪室宽度对可渗明基床开孔沉箱前波高反射系数的影响规律,发现反射系数随相对消浪室宽度的增加呈减小—增大—减小的振荡特性,这一发现有别于前人的研究成果,对工程中开孔沉箱消浪室结构的优化设计具有借鉴意义。同时,对试验工况进行数值模拟和解析计算,以物模试验值为标准,评价两种方法在研究相对消浪室宽度对开孔沉箱波高反射系数影响时的规律把握能力及计算精度,对工程中应用这两种方法给出相关建议。 相似文献
6.
基于线性势流假定,对斜向波作用下带横隔板局部开孔沉箱防波堤的水平波浪力进行了理论研究。给出了开孔沉箱法向水平力和横隔板受力的理论计算方法,在极限情况下波浪力的计算结果与文献中的已有结果一致。利用数值算例分析了开孔沉箱总水平力的主要影响因素。开孔沉箱法向总水平力的减小主要集中于结构上半部分波浪影响范围以内。增加单个开孔沉箱的长度有利于减小结构所受总水平波浪力。当波浪入射角或沉箱前开孔墙孔隙影响系数幅值较大时,开孔沉箱横隔板上总水平力的最大值要超过相应的沉箱法向总水平力,此时要注意横隔板的强度问题。 相似文献
7.
开孔率是开孔沉箱波浪反射系数的重要影响因素,迄今为止关于开孔沉箱的物模试验研究成果(包括《防波堤设计与施工规范》)中,开孔率μ通常以线性关系反映在开孔沉箱波浪反射系数的计算关系式中,适用范围为0.2~0.4。但当μ0.2或μ0.4时,开孔率μ对波浪反射系数Kr的影响规律尚需进一步的研究探讨。现借助二维数值波浪水槽,在扩大了的开孔率取值范围内,模拟不规则波与可渗明基床上开孔沉箱的相互作用。结果表明:在0.2≤μ≤0.4的范围内,用线性关系描述开孔率μ对波浪反射系数Kr的影响是合适的;在μ0.4时,数模值和物模试验拟合的经验关系式的趋势是一致的;在μ0.2时,开孔沉箱反射系数K_r随开孔率μ的减小而增大,用物模试验拟合的经验关系式及《防波堤设计与施工规范》中计算公式的线性关系来描述开孔率μ对反射系数K_r的影响是不恰当的。研究成果对开孔沉箱消浪机理的深入认识和开孔沉箱结构的优化设计具有重要意义。 相似文献
8.
9.
新型开孔工字板组合式防波堤波浪力特性试验研究 总被引:1,自引:1,他引:0
开孔工字板组合式防波堤是基于透空板式防波堤的一种新型结构形式,具有自重轻、材料省的特点。为充分了解新型开孔组合式防波堤的受力特性,基于室内水槽物理模型试验,测量新型开孔工字板组合式防波堤上的波压力与结构总力,研究相对波高H/d、相对波长L/B对该新型防波堤结构表面压力的影响,讨论了该新型防波堤所受波浪力荷载与相对波高H/d、相对波长L/B的关系。结果表明,相对波高H/d是决定新型防波堤结构表面波压力和结构总力的主要影响因素。该新型防波堤结构波浪力荷载以垂直方向受力为主,新型防波堤结构所受竖向总力远大于水平总力,最大可达到15倍。新型防波堤水平总力随相对波长L/B先增大后趋于稳定。相对波长L/B=3.617是防波堤结构水平总力变化幅度的分界点。 相似文献
10.
由于开孔前墙和消浪室具有强扰动作用,所以开孔沉箱结构具有很好的消浪效果。本文通过日照港岚山港区码头开孔沉箱结构的物理模型试验,研究了沉箱不同开孔位置的消浪效果和水动力特征,分析了不同方案的反射系数和越浪量。结果表明:水位对反射系数的影响较大,开孔位置较高的方案,其消浪性能较好,且越浪量较小。选择反射系数和越浪量均较小的设计方案进行了水动力试验,结果表明:水平力最大时对应的浮托力约为最大浮托力的60%;浮托力最大时对应的水平力约为最大水平力的75%;波浪对开孔沉箱的作用主要集中于外壁迎浪侧,内部结构受到的波浪力很小;第二消浪室波浪力小于第一消浪室。 相似文献
11.
In this study, the total horizontal and vertical forces as well as the phase differences of irregular waves on a partially perforated caisson breakwater are investigated. The partially perforated caisson is located on a rubble fill foundation and filled with rock. Based on linear potential theory, a simple semi-analytical solution of the present problem is developed by means of the matched eigenfunction method and the finite element method. Experimental tests are also conducted to validate the theoretical model and examine the wave forces acting on the perforated caisson. The effects of some of the main factors on the total wave forces and the phase difference are examined. Theoretical and experimental studies show that when the total horizontal force reaches its peak, the simultaneous total vertical (upward) force is rather small or even becomes downwards. This is due to the existence of an obvious phase difference between the time histories of the total horizontal and vertical forces, which is an important advantage of perforated caissons over traditional structures. 相似文献
12.
Experimental and Theoretical Investigation of Wave Forces on A Partially-Perforated Caisson Breakwater with A Rock-Filled Core 总被引:2,自引:0,他引:2
1.IntroductionVertical breakwaters are widely used for harbor and coastline protection in coastal engineering.Recently,perforated breakwaters have been often used in practice as they can effectively reduce thewaveforces actingon,the wave reflectionfromand… 相似文献
13.
The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application. 相似文献
14.
The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover. 相似文献
15.
The semicircular breakwater (SBW) is a composite breakwater consisting of a semicircular caisson resting on a rubble mound. The SBW function as a barrier dissipates the incident wave energy and creates tranquillity on its leeside. The dynamic pressures due to regular waves exerted on seaside perforated SBWs with 7 and 11% of exposed surface area with perforations were measured. The measured pressures are compared with those exerted on impermeable SBWs. In addition, the forces exerted on the caisson alone are measured. The reflection coefficient, measured total forces on the caisson of the models, and the pressures are presented as functions of relative water depth. The effect of the water depth and the percentage of perforations on the above stated variables are examined, details of which are reported in this paper. 相似文献