Segmentation and differential post-rift uplift at the Angola margin as recorded by the transform-rifted Benguela and oblique-to-orthogonal-rifted Kwanza basins

We analyse tectonic and sedimentary field and subsurface data for the Angola onshore margin together with free-air gravity anomaly data for the offshore margin. This enables us to characterize the mode of syn-rift tectonism inherited from the Precambrian and its impact on the segmentation of the Angola margin. We illustrate that segmentation by the progressive transition from the Benguela transform-rifted margin segment to the oblique-rifted South Kwanza and orthogonal-rifted North Kwanza margin segments. The spatial variation in the intensity of post-rift uplift is demonstrated by the study of a set of geomorphic markers detected in the post-rift succession of the coastal Benguela and Kwanza Basins: Upper Cretaceous to Cenozoic uplifted palaeodeltas, erosional unconformities, palaeovalleys, Quaternary marine terraces and perched Gilbert deltas. The onshore Benguela transform margin has a distinctive, mainly progradational stratigraphic architecture with long-term sedimentary gaps and high-elevation marine terraces resulting from moderate Upper Cretaceous–Cenozoic to major Quaternary uplifting (i.e. 775–1775 mm/ky or m/Ma). By contrast, repeated synchronous episodes of minor Cenozoic to Quaternary uplift occurred along the orthogonal-rifted North Kwanza segment with its Cenozoic aggradational architecture, short-term sedimentary gaps and low-elevation Pleistocene terraces. Margin style likewise governs spatial variations in the volume of offshore sediment dispersed in the associated deep-sea fans. Along the low-lying North Kwanza margin, sedimentation of the broad Cenozoic to Pleistocene Kwanza submarine fan was probably governed by the width of the Kwanza interior palaeodrainage basin combined with the wet tropical Neogene climate. Along the high-rising Benguela margin, the small size of the Benguela deep-sea fan is related to the interplay between moderate continental sediment dispersal from long-lived small catchments and a warm, very arid Neogene climate. However, the driving forces behind the epeirogenic post-rift uplift of the Angola coastal bulge remain a matter of speculation.     

南海西南次海盆被动陆缘构造单元划分及伸展演化过程

南海西南次海盆被动陆缘洋陆转换带位于陆缘强烈伸展区,蕴含着岩石圈临界伸展破裂和洋盆扩张过程的丰富信息。本文利用多道地震剖面和重力异常数据,对西南次海盆被动陆缘构造单元进行划分,研究陆缘南、北部洋陆转换带结构构造特征,探讨陆缘伸展演化过程。多道地震剖面资料显示,北部洋陆转换带发育有裂陷期断陷和向海倾斜的掀斜断块;南部发育有低角度正断层控制的裂陷期断陷、海底火山以及局部隆起;从陆到洋方向,重力异常值变化明显。根据上述结果南海西南次海盆被动陆缘划分为近端带、洋陆转换带和洋盆三个构造单元,分别对应了其伸展演化过程的三个阶段：前裂谷阶段、陆缘裂陷阶段和海底扩张阶段。     

Geology and Oil and Gas Bearing Potential of the East Canadian Continental Margin

Oceanology - Within the East Canadian continental margin, three oil and gas bearing regions have been identified from north to south: the Labrador Sea shelf, the margin of the Grand Banks of...     

Structure and evolution of a passive margin in a compressive environment: Example of the south-western Alps-Ligurian basin junction during the Cenozoic

We focus on the northern Ligurian margin, at the geological junction of the subalpine domain and the Ligurian oceanic basin, in order (1) to identify the location of the southern limit of the Alpine compressive domain during the Cenozoic, and (2) to study the influence of a compressive environment on the tectonic and sedimentary evolution of a passive margin.Based on published onshore and offshore data, we first propose a chronology of the main extensional and compressional regional tectonic events.High-resolution seismic data image the margin structure down to ∼3 km below seafloor. These data support that past rifting processes control the present-day margin structure, and that 2800-4000 m of synrift sediment was deposited on this segment of the margin in two steps. First, sub-parallel reflectors indicate sediment deposition within a subsident basin showing a low amount of extension. Then, a fan-shaped sequence indicates block tilting and a higher amount of extension. We do not show any influence of the Miocene Alpine compression on the present-day margin structure at our scale of investigation, despite the southern subalpine relief formed in the close hinterland at that time. The southern front of the Miocene Alps was thus located upslope from the continental margin.Finally, a comparison with the Gulf of Lions margin suggests that the tectonic influence of the Alpine compression on the rifting processes is restrited to an increase of the subsidence related to flexure ahead of the Alpine front, explaining abnormally high synrift thicknesses in the study area. The Alpine environment, however, has probably controlled the sedimentary evolution of the margin since the rifting. Indeed, sediment supply and distribution would be mainly controlled by the permanent building of relief in the hinterland and by the steep basin morphology, rather than by sea-level fluctuations, even during the Messinian sea-level low-stand.     

A note on the subsidence history of the northern margin of the Alboran Basin

Backstripping of four marine wells on the northern margin of the Alboran Basin reveals a tectonic subsidence history that varies laterally along the margin from east to west. The well on the eastern margin (AndA1) records a fairly steady, continuous subsidence for most of its history, whereas wells on the western margin (AndG1 and AlbA1) show two distinct phases in their subsidence curves. The form of the subsidence curve for DSDP well 121 reflects its position on a structural high. Beta values for the tectonic subsidence curves range between 1.3 and 1.6.     

From oblique subduction to intra-continental transpression: Structures of the southern Kermadec-Hikurangi margin from multibeam bathymetry,side-scan sonar and seismic reflection

The southern Kermadec-Hikurangi convergent margin, east of New Zealand, accommodates the oblique subduction of the oceanic Hikurangi Plateau at rates of 4–5 cm/yr. Swath bathymetry and sidescan data, together with seismic reflection and geopotential data obtained during the GEODYNZ-SUD cruise, showed major changes in tectonic style along the margin. The changes reflect the size and abundance of seamounts on the subducting plateau, the presence and thickness of trench-fill turbidites, and the change to increasing obliquity and intracontinental transpression towards the south. In this paper, we provide evidence that faulting with a significant strike-slip component is widespread along the entire 1000 km margin. Subduction of the northeastern scrap of the Hikurangi Plateau is marked by an offset in the Kermadec Trench and adjacent margin, and by a major NW-trending tear fault in the scarp. To the south, the southern Kermadec Trench is devoid of turbidite fill and the adjacent margin is characterized by an up to 1200 m high scarp that locally separates apparent clockwise rotated blocks on the upper slope from strike-slip faults and mass wasting on the lower slope. The northern Hikurangi Trough has at least 1 km of trench-fill but its adjacent margin is characterized by tectonic erosion. The toe of the margin is indented by 10–25 km for more than 200 km, and this is inferred to be the result of repeated impacts of the large seamounts that are abundant on the northern Hikurangi Plateau. The two most recent impacts have left major indentations in the margin. The central Hikurangi margin is characterized by development of a wide accretionary wedge on the lower slope, and by transpression of presubduction passive margin sediments on the upper slope. Shortening across the wedge together with a component of strike-slip motion on the upper slope supports an interpretation of some strain partitioning. The southern Hikurangi margin is a narrow, mainly compressive belt along a very oblique, apparently locked subduction zone.     

Oblique rifting in the Havre Trough and its propagation into the continental margin of New Zealand: Comparison with analogue experiments

The Havre Trough is opening by oblique back-arc rifting which is propagating into the continental margin of New Zealand at the Taupo Volcanic Zone. Variations of deformational style along the rift axis have been investigated by comparison with analogue experiments which incorporate brittle and ductile rheologies and are scaled for gravity. Based on the results of the analogue experiments, we present a tectonic model for oblique rifting in the Havre Trough, which involves the rheological contrast between oceanic and continental lithosphere and the oblique geometry of the continental margin of New Zealand with respect to the regional rift trend. The model shows that the continental margin, which is weaker than both oceanic and continental lithosphere, cannot support large shear stresses. The two lithospheres can be decoupled during extensional events along the marginal shear and, depending on the continental margin orientation, this shear can modify the regional stress field. A heterogeneous stress field will rotate normal stresses to be perpendicular or parallel to the margin. As the two lithospheres decouple during extension, the rift grabens and internal faults of the oblique rift system propagate normal to the marginal shear. This model explains the oblique trend of the Havre Trough's tectonic fabric and its relationships to the Vening Meinesz Fracture Zone which represents the oceanic/continental lithospheric boundary.As the Havre Trough rift propagates into the continental margin, rheological differences between oceanic and continental lithosphere result in variations in distribution of strain along the rift axis. Extension of oceanic sub-arc lithosphere is localized into a single rift graben. At the transition into continental rifting, the zone of extension widens into a number of rift grabens forming complex indentations into the margin. This change in deformation style is consistent with analogue experiments as well as other natural examples and results from the contrast in lithospheric rheology and its influence on the process of strain localization.     

Segmentation and volcano-tectonic characteristics along the SW African continental margin,South Atlantic,as derived from multichannel seismic and potential field data

Regional seismic reflection and potential field data document the South Atlantic's break-up history, between 39°S and 19°S, from the Early Cretaceous onwards. Previous maps of distribution of volcanics along the margin showed volcanics along the whole African margin based on extrapolation of data. Based on previously unpublished marine geophysical data, we found the southernmost 460 km long margin segment to be lacking huge volumes of break-up related volcanic effusives. Northwards, break-up was accompanied by the emplacement of huge volumes of volcanic material, prominently featured in seismic sections as huge wedge-shaped seaward dipping reflectors (SDRs). Detailed mapping of offsets (left- and right-stepping) and variations in structural character of the volcanics reveal the segmentation along and the break-up history of the margin. Several superimposed SDR sequences, suggesting episodicity of volcanic emplacement (divided by periods of erosion and sedimentation), are distinct along southerly lines, losing prominence northwards.A main outcome of our study is that this passive margin is not continuously of the volcanic type and that the change from a non-volcanic to a volcanic margin occurs abruptly.We define four distinct First-order Segments along the 2400 km section of the southwestern African margin covered by our seismic data. From south to north these First-order Segments are: Magma-poor Segment I; Segment II with enormous SDRs volumes; decreasing SDRs volumes in Segment III; Segment IV again with enormous volcanic output, likely influenced by Walvis Ridge volcanism.Most important is that there is no systematic increase in the volumes of the effusives towards the Tristan da Cunha hot-spot. Rather there is an alternating pattern in the SDRs' volumes and widths.The boundary between the volcanic and magma-poor margin segments in the southernmost study area is sharp (10s of km), which we propose is reflected in magnetic anomaly data as well. We suggest that this variability along the margin is mainly due to a change in stretching/rifting character from oblique during the early stages of breakup to conventional seafloor spreading from Chron M4 (∼130 Ma) onwards.     

Formation and evolution of the tertiary carbonate reefs in the Madura Strait Basin of Indonesia

Analysis of 2 D seismic data over 4 500 km in length from the Madura Strait Basin in the East Java Sea reveals seismic re?ection characteristics of reefs and associated sedimentary bodies, including asymmetrical or symmetrical dome re?ections, slope progradational re?ections, chaotic re?ections and discontinuous strong re?ections inside the reef, which onlap the ?ank of the reef. It is concluded that the developmental paleo-environment of most reefs is mainly conducive to shallow marine carbonate platform facies and platform margin facies, based on well core data, variations in seismic facies and strata thickness.The formation and evolution of all reefs are primarily in?uenced by the tectonic framework of the Madura Strait Basin. Platform margin reefs are principally controlled by two types of structures: one is a series of E-W trending Paleogene normal faults, and the other is an E-W trending Neogene inversion structures. In addition, wave actions, tidal currents and other ocean currents play an accelerated role in sorting, rounding and redeposition for the accumulation and evolution of reefs. Tertiary reefs in the MSB can be divided into four types: 1) an open platform coral reef of Late Oligocene to Early Miocene, 2) a platform margin coral reef controlled by normal faults in Late Oligocene to Early Miocene, 3) a platform margin Globigerina moundreef controlled by a "hidden" inversion structure in Early Pliocene, and 4) a platform margin Globigerina mound-reef controlled by thrust faults in the early Pliocene. Patterns of the formation and evolution of reefs are also suggested.     

Shallow structures and evolution of the Ivory Coast and Ghana transform margin

Seismic profiles across the transform continental margin off the Ivory Coast and Ghana (Western Africa) illustrate the structural style resulting from the early Cretaceous phase of shear stress which leads to the final separation between the African and Brazilian continental margins in this area. Most of the characteristic tectonic features observed along this portion of margin (asymmetric grabens on the Ghanean platform, folds of the deep Ivory Coast basin, the Ivory Coast—Ghana marginal ridge) are believed to result from progressive transform contacts between the African and Brazilian continents as their margins were created during early Cretaceous time. A major tectonic unconformity inferred to be of upper Albian-lower Cenomanian age, may be a direct consequence of the final separation of the continental margins. The later evolution of the transform margin is chiefly explained by thermal subsidence.     

The Levant Slumps and the Phoenician Structures: collapse features along the continental margin of the southeastern Mediterranean Sea

Two distinct series of slumps deform the upper part of the sedimentary sequence along the continental margin of the Levant. One series is found along the base of the continental slope, where it overlies the disrupted eastern edge of the Messinian evaporites. The second series of slumps transects the continental margin from the shelf break to the Levant Basin. It seemed that the two series were triggered by two unrelated, though contemporaneous, processes. The shore-parallel slumps were initiated by basinwards flow of the Messinian salt, that carried along the overlying Plio-Quaternary sediments. Seawater that percolated along the detachment faults dissolved the underlying salt to form distinctly disrupted structures. The slope-normal slumps are located on top of large canyons that cut into the pre-Messinian sedimentary rocks. A layer of salt is found in the canyons, and the Plio-Quaternary sediments were deposited on that layer. The slumps are bounded by large, NW-trending faults where post-Messinian faulted offset was measured. We presume that the flow of the salt in the canyons also drives the slope-normal slumps. Thus thin-skinned halokynetic processes generated the composite post-Tortonian structural patterns of the Levant margin. The Phoenician Structures are a prime example of the collapse of a distal continental margin due to the dissolution of a massive salt layer.     

Structural style and evolution of the Gulf of Lion Oligo-Miocene rifting: role of the Pyrenean orogeny

The Gulf of Lion margin results from the Cligo-Aquitanian rifting and Burdigalian crustal separation between continental Europe and Corsica-Sardinia. Immediately before the onset of extension, the area of the Gulf of Lion was affected by the Pyrenean orogeny which controlled the structural style of the evolving margin. During extension, the foreland of the Pyrenean orogen was affected by extensional thin-skinned tectonics. The décollement level ramped down into the basement, in areas where the latter was thickened during orogeny. In this intermediate part, the margin was extended by several crustal-scale low-angle faults, which generated small amounts of syn-rift sedimentation compared with the accumulation of post-rift sediments. However, more than 4 km of syn-rift sediments were deposited in the Camargue basin, which is located at the transition between thin- and thick-skinned extensional systems. Kinematic restorations and stratigraphy suggest a pre-rift surface elevation above sea-level of at least 1 km in the intermediate part of the margin, which is in agreement with reduced syn-rift sedimentation. The slope area extends seaward of the North Pyrenean Fault, a terrane boundary inherited from the Pyrenean collision. This part of the margin was stretched by seaward dipping low-angle block tilting of the upper crust, and antithetic lower crustal and sub-crustal detachment. The lithospheric structures inherited from the Pyrenean orogeny exerted a strong control on the kinematics of the rifting and on the distribution and history of subsidence. Such parameters need to be integrated in the definition of pre-rift initial conditions in future basin-modelling of the Gulf of Lion.     

On the formation of laminated sediments on the continental margin off Pakistan: the effects of sediment provenance and sediment redistribution

The sedimentary processes and sediment sources contributing to the formation of laminated sediments along the upper slope off Pakistan are unravelled using inorganic bulk sediment geochemistry of 43 surface cores from the Pakistani continental margin and additional geochemical and Pb and Nd-isotope data for different types of layers. An important process everywhere along the margin is redeposition of fluvial-derived detritus from the shelf onto the slope. This process is of considerably higher intensity along the Makran margin than on the Indus margin. Trace element enrichment related to early diagenesis or surface productivity, which is commonly detectable in bulk sediment composition, is swamped by the high clastic supply in the Makran region, but may be observed in the Indus region.Four types of layers are found in the laminated sediment cores from the upper slope. They reflect different mechanisms of deposition and different sediment sources. An alternating pattern of olive-grey and black layers results from downslope redeposition of fluvial material over most of the year, to which organic matter from sea surface production is added during the late summer monsoon season. Distinctive white to grey coloured layers along the Makran slope originate from large scale expulsion of sediments from the Makran accretionary wedge through mud volcanoes on the shelf, subsequent erosion by waves, and downslope redeposition. These layers may dominate the sedimentary record within the Makran accretionary wedge, but are absent on the Indus margin. Occasional red coloured turbidites, which probably represent larger floods on the Indus plain, contribute to this mixture of varying sedimentary processes and sediment sources along the Pakistani continental slope.     

Input of Glaciomarine Sediments along the East Antarctic Continental Margin; Depositional Processes on the Cosmonaut Sea Continental Slope and Rise and a Regional Acoustic Stratigraphic Correlation from 40° W to 80° E

Multichannel seismic reflection data from the Cosmonaut Sea margin of East Antarctica have been interpreted in terms of depositional processes in the continental slope and rise area. A major sediment lens is present below the upper continental rise along the entire Cosmonaut Sea margin. The lens probably consists of sediments supplied from the shelf and slope, being constantly reworked by westward flowing bottom currents, which redeposited the sediments into a large scale drift deposit prior to the main glaciogenic input along the margin. High-relief semicircular or elongated depositional structures are also found on the upper continental rise stratigraphically above the regional sediment lens, and were deposited by the combined influence of downslope and alongslope sediment transport. On the lower continental rise, large-scale sediment bodies extend perpendicular to the continental margin and were deposited as a result of downslope turbidity transport and westward flowing bottom currents after initiation of glacigenic input to the slope and rise. We compare the seismostratigraphic signatures along the continental margin segments of the adjacent Riiser Larsen Sea, the Weddell Sea and the Prydz Bay/Cooperation Sea, focussing on indications that may be interpreted as a preglacial-glaciomarine transition in the depositional environment. We suggest that earliest glaciogenic input to the continental slope and rise occurred in the Prydz Bay and possibly in the Weddell Sea. At a later stage, an intensification of the oceanic circulation pattern occurred, resulting in the deposition of the regional plastered drift deposit along the Cosmonaut Sea margin, as well as the initiation of large drift deposits in the Cooperation Sea. At an even later stage, possibly in the middle Miocene, glacial advances across the continental shelf were initiated along the Cosmonaut Sea and the Riiser Larsen Sea continental margins.     

大陆坡脚确定原则与方法

大陆坡脚是大陆边缘的一个重要地形特征,是沿海国扩展其大陆架权利和划定其200海里以外大陆架外部界限的基础,也是大陆架界限委员会审议沿海国划界案时特别关注的重要技术参数。《联合国海洋法公约》第76条大陆架制度的制定源于典型的被动大陆边缘。但由于全球大陆边缘的多样性和复杂性,特别是后期构造活动、沉积作用对大陆边缘的改造与影响,海底地形地貌异常复杂多变,导致大陆坡脚的识别非常困难。加上各沿海国为获得最大范围的外大陆架,对大陆坡脚的相关规定进行有利于自己的解释,使得大陆坡脚的确定成了外大陆架划界中一个颇具争议的热点问题。本文基于对《联合国海洋法公约》和《大陆架界限委员会科学和技术准则》对大陆坡脚的规定,结合不同类型大陆边缘的地质特征和各沿海国划界实践,对陆坡基部区的确定、坡度变化最大之点的选取以及相反证明规则的适用性等问题进行了探讨。     

Geochemical and isotopic characteristics of volcanic rocks from the northern East China Sea shelf margin and the Okinawa Trough

Volcanic rocks both from the northern East China Sea (NECS) shelf margin and the northern Okinawa Trough are subalkaline less aluminous,and lower in High Field Strength Elements (HFSE).These rocks are higher in Large Ion Lithophile Elements (LILE),thorium and uranium contents,positive lead anomalies,negative Nb-Ta anomalies,and enrichment in Light Rare Earth Elements (LREE).Basalts from the NECS shelf margin are akin to Indian Ocean Mid-Ocean Ridge Basalt (MORB),and rhyolites from the northern Okinawa Trough have the highest 207 Pb/ 204 Pb and 208 Pb/ 204 Pb ratios.The NECS shelf margin basalts have lower 87 Sr/ 86 Sr ratios,ε N d and σ 18 O than the northern Okinawa Trough silicic rocks.According to 40 K– 40 Ar isotopic ages of basalts from the NECS shelf margin,rifting of the Okinawa Trough may have been active since at least 3.65–3.86 Ma.The origin of the NECS shelf margin basalt can be explained by the interaction of melt derived from Indian Ocean MORB-like mantle with enriched subcontinental lithosphere.The basalts from both sides of the Okinawa Trough may have a similar origin during the initial rifting of the Okinawa Trough,and the formation of basaltic magmas closely relates to the thinning of continental crust.The source of the formation of the northern Okinawa Trough silicic rocks was different from that of the middle Okinawa Trough,which could have been generated by the interaction of basaltic melt with an enriched crustal component.From the Ryukyu island arc to East China,the Cenozoic basalts have apparently increasing trends of MgO contents and ratios of LREE to Heavy Rare Earth Elements (HREE),suggesting that the trace element variabilities of basalts may have been influenced by the subduction of the Philippine Sea plate,and that the effects of subduction of the Philippine Sea plate on the chemical composition of basaltic melts have had a decreasing effect from the Ryukyu island arc to East China.     

Fission track study: heating and denudation of marginal ridge of the Ivory Coast–Ghana transform margin

 Six sandstone blocks sampled during dives along the southern slope of the Ivory Coast–Ghana continental margin have been studied using fission tracks in apatite and zircon. Measurements demonstrate that the rocks were heated above 120°C but below 390°C and cooled quickly. The ages of cooling recorded by the apatite crystals are 90 Ma in the western part of the margin, and 80–70 Ma in the central and eastern part. Heating is interpreted by the heat liberation due to the friction along the active transform fault and by the vicinity of an oceanic spreading center, which slipped along the margin. Cooling is interpreted by two stages of denudation due to minor faults and landslides produced by the increasing of the bathymetric step between the continental margin and the oceanic crust. Received: 12 April 1995 / Revision received: 20 December 1995     

Structure and morphology of the west Reykjanes basin and the southeast Greenland continental margin

The continental-shelf morphology is dominated by glacial erosion and deposition. Erosion is prominent on the near-shore shelf and deposition along the outer shelf edge. The continental slope is characterized by delta-shaped progradations (glaciomarine-sediment fans) seaward of the shelf channels. Canyons cross the continental slope only in the region southeast of Cape Farewell. The continental rise is incised by a number of submarine canyons. Broad sediment ridges on the upper continental rise are probably canyon-eroded remains of extensive Plio-Pleistocene fans. A mid-ocean channel which crosses the continental rise is possibly related to the axis of maximum depth of Denmark Strait. Despite the presence of strong bottom currents, there is no indication of depositional sediment drifts along the continental margin of Greenland between Cape Farewell and Denmark Strait. This may be a function of high current velocity or low sediment load.Sea floor older than 60 m.y. B.P. is present just seaward of the Greenland continental margin implying either downwarped continental material or an early rift formed prior to the separation of Greenland from the European plate. A left lateral offset of anomalies 20 and 21 at 65°N indicates a major fracture zone related to the Greenland continental margin offset nearby.     

Structural interpretation of the Konkan basin,southwestern continental margin of India,based on magnetic and bathymetric data

Magnetic and bathymetric studies on the Konkan basin of the southwestern continental margin of India reveal prominent NNW-SSE, NW-SE, ENE-WSW, and WNW-ESE structural trends. The crystalline basement occurs at about 5–6 km below the mean sea level. A mid-shelf basement ridge, a shelf margin basin, and the northern extension of the Prathap Ridge complex are also inferred. The forces created by the sea-floor spreading at Carlsberg Ridge since late Cretaceous appears to shape the present-day southwestern continental margin of India and caused the offsets in the structural features along the preexisting faults.     

Neogene stratigraphy and the sedimentary and oceanographic development of the NW European Atlantic margin

A regional correlation of Neogene stratigraphy has been attempted along and across the NW European Atlantic continental margin, between Mid-Norway and SW Ireland. Two unconformity-bounded successions are recognised. These are referred to as the lower and upper Neogene successions, and have been dated as Miocene–early Pliocene and early Pliocene–Holocene, respectively, in age. Their development is interpreted to reflect plate-wide, tectonically driven changes in the sedimentary, oceanographic and latterly climatic evolution of the NE Atlantic region. The lower Neogene succession mainly preserves a record of deep-water sedimentation that indicates an expansion of contourite sediment drifts above submarine unconformities, within this succession, on both sides of the eastern Greenland–Scotland Ridge from the mid-Miocene. This is interpreted to record enhanced deep-water exchange through the Faroe Conduit (deepest part of the Southern Gateway), and can be linked to compressive inversion of the Wyville–Thomson Ridge Complex. Thus, a pervasive, interconnected Arctic–North Atlantic deep-water circulation system is a Neogene phenomenon. The upper Neogene succession records a regional change, at about 4 Ma, in the patterns of contourite sedimentation (submarine erosion, new depocentres) coeval with the onset of rapid seaward-progradation of the continental margin by up to 100 km. This build-out of the shelf and slope is inferred to record a marked increase in sediment supply in response to uplift and tilting of the continental margin. Associated changes in deep-water circulation may be part of an Atlantic-wide reorganisation of ocean bottom currents. Glacial sediments form a major component of the prograding shelf margin (shelf-slope) sediment wedges, but stratigraphic data indicate that the onset of progradation pre-dates significant high-latitude glaciation by at least 1 Ma, and expansive Northern Hemisphere glaciation by at least 3 Ma.