New insights into the mineralogy and weathering of the Meridiani Planum meteorite,Mars

Meridiani Planum is the first officially recognized meteorite find on the surface of Mars. It was discovered at and named after the landing site of the Mars Exploration Rover Opportunity. Based on its composition, it was classified as a IAB complex iron meteorite. Mössbauer spectra obtained by Opportunity are dominated by kamacite (α‐Fe‐Ni) and exhibit a small contribution of ferric oxide. Several small features in the spectra have been neglected to date. To shed more light on these features, five iron meteorite specimens were investigated as analogs to Meridiani Planum with a laboratory Mössbauer setup. Measurements were performed on (1) their metallic bulk, (2) troilite (FeS) inclusions, (3) cohenite ((Fe,Ni,Co)₃C) and schreibersite ((Fe,Ni)₃P), and (4) corroded rims. In addition to these room‐temperature measurements, a specimen from the Mundrabilla IAB‐ungrouped meteorite was measured at Mars‐equivalent temperatures. Based on these measurements, the features in Meridiani Planum spectra can be explained with the presence of small amounts of schreibersite and/or cohenite and iron oxides. The iron oxides can be attributed to a previously reported coating on Meridiani Planum. Their presence indicates weathering through the interaction of the meteorite with small amounts of water.     

Ulasitai: A new iron meteorite likely paired with Armanty (IIIE)

Abstract— The Ulasitai iron was recently found about 130 km southeast to the find site of the Armanty (Xinjiang, IIIE) meteorite. It is a coarse octahedrite with a kamacite bandwidth of 1.2 ± 0.2 (0.9–1.8) mm. Plessite is abundant, as is taenite, kamacite, cohenite, and schreibersite with various microstructures. Schreibersite is Ni‐rich (30.5–55.5 wt%) in plessite or coexisting with troilite and daubreelite, in comparison with the coarse laths (20.6–21.2 wt%) between the Widmanstätten pattern plates. The correlation between the center Ni content and the half bandwidth of taenite suggest a cooling rate of ?20 °C/Myr based on simulations. The petrography and mineral chemistry of Ulasitai are similar to Armanty. The bulk samples of Ulasitai were measured, together with Armanty, Nandan (IIICD), and Mundrabilla (IIICD), by inductively coupled plasma atomic emission spectrometry (ICP‐AES) and mass spectrometry (ICP‐MS). The results agree with literature data of the same meteorites, and our analyses of four samples of Armanty (L1, L12, L16, L17) confirm a homogeneous composition (Wasson et al. 1988). The bulk composition of Ulasitai is identical to that of Armanty, both plotting within the IIIE field. We classify Ulasitai as a new IIIE iron and suggest that it pairs with Armanty.     

Origin of kamacite,schreibersite, and perryite in metal‐sulfide nodules of the enstatite chondrite Sahara 97072 (EH3)

Abstract– Perryite [(Fe,Ni)_x(Si,P)_y], schreibersite [(Fe,Ni)₃P], and kamacite (αFeNi) are constituent minerals of the metal‐sulfide nodules in the Sahara 97072 (EH3) enstatite chondrite meteorite. We have measured concentrations of Ni, Cu, Ga, Au, Ir, Ru, and Pd in these minerals with laser ablation, inductively coupled plasma mass spectrometry (ICP‐MS). We also measured their Fe, Ni, P, Si, and Co concentrations with electron microprobe. In kamacite, ratios of Ru/Ir, Pd/Ir, and Pd/Ru cluster around their respective CI values and all elements analyzed plot near the intersection of the equilibrium condensation trajectory versus Ni and the respective CI ratios. In schreibersite, the Pd/Ru ratio is near the CI value and perryite contains significant Cu, Ga, and Pd. We propose that schreibersite and perryite formed separately near the condensation temperatures of P and Si in a reduced gas and were incorporated into Fe‐Ni alloy. Upon further cooling, sulfidation of Fe in kamacite resulted in the formation of additional perryite at the sulfide interface. Still later, transient heating re‐melted this perryite near the Fe‐FeS eutectic temperature during partial melting of the metal‐sulfide nodules. The metal‐sulfide nodules are pre‐accretionary objects that retain CI ratios of most siderophile elements, although they have experienced transient heating events.     

Differentiation of metal‐rich meteoritic parent bodies: I. Measurements of PGEs,Re, Mo,W, and Au in meteoritic Fe‐Ni metal

Abstract— We describe an analytical technique for measurements of Fe, Ni, Co, Mo, Ru, Rh, W, Re, Os, Ir, Pt, and Au in bulk samples of iron meteorites. The technique involves EPMA (Fe, Ni, Co) and LA‐ICP‐MS analyses of individual phases of iron meteorites, followed by calculation of bulk compositions based on the abundances of these phases. We report, for the first time, a consistent set of concentrations of Mo, Ru, Rh, Pd, W, Re, Os, Ir, Pt, and Au in the iron meteorites Arispe, Bennett County, Grant, Cape of Good Hope, Cape York, Carbo, Chinga, Coahuila, Duchesne, Gibeon, Henbury, Mundrabilla, Negrillos, Odessa, Sikhote‐Alin, and Toluca and the Divnoe primitive achondrite. The comparison of our LA‐ICP‐MS data for a number of iron meteorites with high‐precision isotope dilution and INAA data demonstrates the good precision and accuracy of our technique. The narrow ranges of variations of Mo and Pd concentrations within individual groups of iron meteorites suggest that these elements can provide important insights into the evolution of parent bodies of iron meteorites. Under certain assumptions, the Mo concentrations can be used to estimate mass fractions of the metal‐sulfide cores in the parent bodies of iron meteorites. It appears that a range of Pd variations within a group of iron meteorites can serve as a useful indicator of S content in the core of its parent body.     

Mineralogical and Geochemical Study of Zhaoping,Xifu and Hami Iron Meteorites

The mineralogy and bulk chemical compositions of three iron meteorites (Zhaoping, Xifu and Hami) recently found in China are reported here and are classified on the basis of their bulk chemical compositions. Zhaoping contains 93.4 mg/g Ni, 85.9 μg/g Ga, 418 μg/g Ge, 5.24 mg/g Co, 1.94 μg/g Ir, 0.774 μg/g W, and 1.62 μg/g Au and belongs to the low-Ni, low-Au subgroup of IAB. It is a coarse octahedrite and consists of kamacite, taenite, troilite, schreibersite and cohenite. The cohenite has entirely decomposed to graphite and low-Ni kamacite in our samples. Zhaoping contains some inclusions of Mn-free sarcopside which were rarely reported in IAB iron meteorites. Xifu has 74.1 mg/g Ni, 58.8gμg/g Ga, 150 μg/g Ge, and 0.913 μg/g W. Xifu is a member of group IIICD iron meteorite. Like most of IIICD irons, Xifu is a coarsest octahedrite with kamacite bandwidth larger than 3mm, and contains kamacite, taenite and schreibersite. Carbides and graphite are not found in the sample because of its being heterogeneous. Hami has 106 mg/g Ni, 5.36 mg/g Co and 0.922 μg/g Ir. We did not obtain the Ga and Ge contents in Hami because of their low concentrations and the limited precision of the INAA technique. Hami is an unclassified iron meteorite on the basis of the contents of other trace elements, structure and mineralogy. On mineralogy and structure, Hami resembles Rafruti, another unclassified iron meteorite.     

MOSSBAUER SPECTRA FOR IRON BEARING PHASES IN THE METEORITE TOLUCA

Room temperature Mossbauer spectra have been obtained for several iron bearing phases in the octahedrite Toluca. The spectrum for kamacite contains six lines, as expected for a ferromagnetic material. That for taenite contains a strong six-line pattern, closely similar to that for kamacite, plus a weak singlet. The former is due to the ferromagnetic form of taenite, which predominates, and the latter to the non-equilibrium paramagnetic form. The spectra for troilite, schreibersite and cohenite are similar to those for terrestrial troilite, synthetic schreibersite and cementite, respectively. With some troilite samples, a weak doublet due to some non-magnetic phase was obtained. This was found to match the doublet reported for terrestrial pyrite, but the results are not such as to make a positive identification possible. This exploratory study of the Mossbauer spectra of some of the principal phases found in iron-nickel meteorites suggests that the main value of Mossbauer spectroscopy in the study of meteorites lies in its ability to detect relatively small amounts of paramagnetic phases such as the paramagnetic form of taenite.     

The Antarctic achondrite,Grove Mountains 021663: An olivine‐rich winonaite

Abstract– The Grove Mountains (GRV) 021663 meteorite was collected from the Grove Mountains region of Antarctica. The meteorite is composed primarily of olivine (Fa_5.4), orthopyroxene (Fs_4.7Wo_3.0), chromian diopside (En_53.6Fs_2.4Wo₄₄), troilite, kamacite, and plagioclase (Ab_74.5Or₄An_21.5). Minor phases include schreibersite and K‐feldspar. The meteorite is highly weathered (W3) and weakly shocked (S2). We determine a whole rock oxygen isotopic composition of δ¹⁸O = 7.50‰, δ¹⁷O = 3.52‰. Comparisons of these data with other primitive achondrites have resulted in the reclassification of this meteorite as a member of the winonaite group. The occurrences of troilite, metal, and schreibersite in GRV 021663 indicate that these minerals were once completely molten. Euhedral inclusions of pyroxene within plagioclase further suggest that these may have crystallized from a silicate melt, while the depletion of plagioclase, metal, and troilite indicates that GRV 021663 could represent a residuum following partial melting on its parent asteroid. Trace element distributions in silicate minerals do not, however, confirm this scenario. As with other winonaite meteorites, the formation of GRV 021663 probably relates to brecciation and mixing of heterogeneous lithologies, followed by varying degrees of thermal metamorphism on the parent body asteroid. Peak metamorphic conditions may have resulted in localized partial melting of metal and silicate mineralogies, but our data are not conclusive.     

MINERALOGICAL RELATIONSHIPS IN SEYMOUR,A COARSE OCTAHEDRITE

Seymour is a coarse octahedrite weighing 24.5 kg. It contains two types of troilite-graphite nodules (massive graphite nodules with irregular troilite rims, and troilite nodules with irregular, partial or total, rims of graphite); four morphologically distinct types of phosphide (lamellar, swathing, grain boundary, and rhabdite); and three types of cohenite (lamellar, swathing, and inclusions in kamacite). It is believed that lamellar and swathing schreibersite crystallized from taenite at approximately 900°C. This was followed by the crystallization of kamacite, then the development of cohenite, and finally a second period of phosphide nucleation giving rise to grain boundary schreibersite and rhabdite. Compositional data indicates that grain boundary schreibersite and rhabdite grew simultaneously.     

Remnants of altered meteorite in the Cretaceous‐Paleogene clay boundary in Poland

Fossil iron meteorites are extremely rare in the geological sedimentary record. The paleometeorite described here is the first such finding at the Cretaceous‐Paleogene (K‐Pg) boundary. In the boundary clay from the outcrop at the Lechówka quarry (Poland), fragments of the paleometeorite were found in the bottom part of the host layer. The fragments of meteorite (2–6 mm in size) and meteoritic dust are metallic‐gray in color and have a total weight of 1.8181 g. Geochemical and petrographic analyses of the meteorite from Lechówka reveal the presence of Ni‐rich minerals with a total Ni amount of 2–3 wt%. The identified minerals are taenite, kamacite, schreibersite, Ni‐rich magnetite, and Ni‐rich goethite. No relicts of silicates or chromites were found. The investigated paleometeorite apparently represents an independent fall and does not seem to be derived from the K‐Pg impactor. The high degree of weathering did not permit the chemical classification of the meteorite fragments. However, the recognized mineral inventory, lack of silicates, and their pseudomorphs and texture may indicate that the meteorite remains were an iron meteorite.     

Metal‐saturated sulfide assemblages in NWA 2737: Evidence for impact‐related sulfur devolatilization in Martian meteorites

NWA 2737, a Martian meteorite from the Chassignite subclass, contains minute amounts (0.010 ± 0.005 vol%) of metal‐saturated Fe‐Ni sulfides. These latter bear evidence of the strong shock effects documented by abundant Fe nanoparticles and planar defects in Northwest Africa (NWA) 2737 olivine. A Ni‐poor troilite (Fe/S = 1.0 ± 0.01), sometimes Cr‐bearing (up to 1 wt%), coexists with micrometer‐sized taenite/tetrataenite‐type native Ni‐Fe alloys (Ni/Fe = 1) and Fe‐Os‐Ir‐(Ru) alloys a few hundreds of nanometers across. The troilite has exsolved flame‐like pentlandite (Fe/Fe + Ni = 0.5–0.6). Chalcopyrite is almost lacking, and no pyrite has been found. As a hot desert find, NWA 2737 shows astonishingly fresh sulfides. The composition of troilite coexisting with Ni‐Fe alloys is completely at odds with Chassigny and Nahkla sulfides (pyrite + metal‐deficient monoclinic‐type pyrrhotite). It indicates strongly reducing crystallization conditions (close to IW), several log units below the fO₂ conditions inferred from chromites compositions and accepted for Chassignites (FMQ‐1 log unit). It is proposed that reduction in sulfides into base and precious metal alloys is operated via sulfur degassing, which is supported by the highly resorbed and denticulated shape of sulfide blebs and their spongy textures. Shock‐related S degassing may be responsible for considerable damages in magmatic sulfide structures and sulfide assemblages, with concomitant loss of magnetic properties as documented in some other Martian meteorites.     

Restriction of parent body heating by metal‐troilite melting: Thermal models for the ordinary chondrites

Ordinary chondrite meteorites contain silicates, Fe,Ni‐metal grains, and troilite (FeS). Conjoined metal‐troilite grains would be the first phase to melt during radiogenic heating in the parent body, if temperatures reached over approximately 910–960 °C (the Fe,Ni‐FeS eutectic). On the basis of two‐pyroxene thermometry of 13 ordinary chondrites, we argue that peak temperatures in some type 6 chondrites exceeded the Fe,Ni‐FeS eutectic and thus conjoined metal‐troilite grains would have begun to melt. Melting reactions consume energy, so thermal models were constructed to investigate the effect of melting on the thermal history of the H, L, and LL parent asteroids. We constrained the models by finding the proportions of conjoined metal‐troilite grains in ordinary chondrites using high‐resolution X‐ray computed tomography. The models show that metal‐troilite melting causes thermal buffering and inhibits the onset of silicate melting. Compared with models that ignore the effect of melting, our models predict longer cooling histories for the asteroids and accretion times that are earlier by 61, 124, or 113 kyr for the H, L, and LL asteroids, respectively. Because the Ni/Fe ratio of the metal and the bulk troilite/metal ratio is higher in L and LL chondrites than H chondrites, thermal buffering has the greatest effect in models for the L and LL chondrite parent bodies, and least effect for the H chondrite parent. Metal‐troilite melting is also relevant to models of primitive achondrite parent bodies, particularly those that underwent only low degrees of silicate partial melting. Thermal models can predict proportions of petrologic types formed within an asteroid, but are systematically different from the statistics of meteorite collections. A sampling bias is interpreted to explain these differences.     

Ion probe measurements of carbon and nitrogen in iron meteorites

Abstract— Carbon and nitrogen distributions in iron meteorites, their concentrations in various phases, and their isotopic compositions in certain phases were measured by secondary ion mass spectrometry (SIMS). Taenite (and its decomposition products) is the main carrier of C, except for IAB iron meteorites, where graphite and/or carbide (cohenite) may be the main carrier. Taenite is also the main carrier of N in most iron meteorites unless nitrides (carlsbergite CrN or roaldite (Fe, Ni)₄N) are present. Carbon and N distributions in taenite are well correlated unless carbides and/or nitrides are exsolved. There seem to be three types of C and N distributions within taenite. (1) These elements are enriched at the center of taenite (convex type). (2) They are enriched at the edge of taenite (concave type). (3) They are enriched near but some distance away from the edge of taenite (complex type). The first case (1) is explained as equilibrium distribution of C and N in Fe-Ni alloy with M-shape Ni concentration profile. The second case (2) seems to be best explained as diffusion controlled C and N distributions. In the third case (3), the interior of taenite has been transformed to the α phase (kamacite or martensite). Carbon and N were expelled from the α phase and enriched near the inner border of the remaining γ phase. Such differences in the C and N distributions in taenite may reflect different cooling rates of iron meteorites. Nitrogen concentrations in taenite are quite high approaching 1 wt% in some iron meteorites. Nitride (carlsbergite and roaldite) is present in meteorites with high N concentrations in taenite, which suggests that the nitride was formed due to supersaturation of the metallic phases with N. The same tendency is generally observed for C (i.e., high C concentrations in taenite correlate with the presence of carbide and/or graphite). Concentrations of C and N in kamacite are generally below detection limits. Isotopic compositions of C and N in taenite can be measured with a precision of several permil. Isotopic analysis in kamacite in most iron meteorites is not possible because of the low concentrations. The C isotopic compositions seem to be somewhat fractionated among various phases, reflecting closure of C transport at low temperatures. A remarkable isotopic anomaly was observed for the Mundrabilla (IIICD anomalous) meteorite. Nitrogen isotopic compositions of taenite measured by SIMS agree very well with those of the bulk samples measured by conventional mass spectrometry.     

Sulfide‐rich metallic impact melts from chondritic parent bodies

Abstract– Sacramento Wash 005 (SaW) 005, Meteorite Hills 00428 (MET) 00428, and Mount Howe 88403 (HOW) 88403 are S‐rich Fe,Ni‐rich metal meteorites with fine metal structures and homogeneous troilite. We compare them with the H‐metal meteorite, Lewis Cliff 88432. Phase diagram analyses suggest that SaW 005, MET 00428, and HOW 88403 were liquids at temperatures above 1350 °C. Tridymite in HOW 88403 constrains formation to a high‐temperature and low‐pressure environment. The morphology of their metal‐troilite structures may suggest that MET 00428 cooled the slowest, SaW 005 cooled faster, and HOW 88403 cooled the quickest. SaW 005 and MET 00428 contain H‐chondrite like silicates, and SaW 005 contains a chondrule‐bearing inclusion that is texturally and compositionally similar to H4 chondrites. The compositional and morphological similarities of SaW 005 and MET 00428 suggest that they are likely the result of impact processing on the H‐chondrite parent body. SaW 005 and MET 00428 are the first recognized iron‐ and sulfide‐rich meteorites, which formed by impact on the H‐chondrite parent body, which are distinct from the IIE‐iron meteorite group. The morphological and chemical differences of HOW 88403 suggest that it is not from the H‐chondrite body, although it likely formed during an impact on a chondritic parent body.     

Characterization of iron meteorites by scanning electron microscopy,x-ray diffraction,magnetization measurements,and Mössbauer spectroscopy: Mundrabilla IAB-ung

A fragment of Mundrabilla IAB-ung iron meteorite was analyzed using optical microscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), magnetization measurements, and Mössbauer spectroscopy. The polished section of meteorite fragment characterization by optical microscopy and SEM shows the presence of the γ-Fe(Ni, Co) phase lamellae, plessite structures and schreibersite inclusions in the α-Fe(Ni, Co) phase. EDS indicates variations in the Ni concentrations in the following ranges: (i) ∼6.3–6.5 atom% in the α-Fe(Ni, Co) phase and (ii) ∼22 to ∼45 atom% in the γ-Fe(Ni, Co) phase lamellae including the range of ∼29–33 atom% of Ni leading to the paramagnetic state of the γ-Fe(Ni, Co) phase. Schreibersite inclusions contain ∼23 atom% of P, ∼33 atom% of Fe, ∼43 atom% of Ni, and ∼0.7 atom% of Co. Plessite structure contains the average Ni concentration of ∼17 atom% while detailed EDS analysis shows: (i) the lowest Ni concentrations of ∼5 to ∼8 atom%, (ii) the intermediate Ni concentrations of ∼9 to ∼19 atom%, and (iii) the highest Ni concentration up ∼38 atom% (some individual micro-grains demonstrate up to ∼47 and ∼59 atom% of Ni) that may indicate the presence of the (i) α-Fe(Ni, Co), (ii) α₂-Fe(Ni, Co), and (iii) γ-Fe(Ni, Co) phases. These may be a result of the γ-phase decomposition with mechanism γ → α + α₂ + γ that indicates a slow cooling rate for Mundrabilla IAB-ung iron meteorite. The presence of ∼98.6 wt% of the α-Fe(Ni, Co) phase and ∼1.4 wt% of the γ-Fe(Ni, Co) phase is found by XRD while schreibersite is not detected. Magnetization measurements show the saturation magnetization moment of Mundrabilla IAB-ung of 188(2) emu g⁻¹ indicating a low average Ni concentration in Fe-Ni-Co alloy. Mössbauer spectrum of the bulk Mundrabilla powder demonstrates five magnetic sextets related to the ferromagnetic α₂-Fe(Ni, Co), α-Fe(Ni, Co), and γ-Fe(Ni, Co) phases and one singlet associated with the paramagnetic γ-Fe(Ni, Co) phase, however, there are no spectral components corresponding to schreibersite. Basing on relatively larger and smaller values of the magnetic hyperfine field, two magnetic sextets associated with γ-Fe(Ni, Co) phase can be related to the disordered and more ordered γ-phases. The iron fractions in the detected phases can be roughly estimated as follows: (i) ∼17.6% in the α₂-Fe(Ni, Co) phase, (ii) ∼68.5% in the α-Fe(Ni, Co) phase, (iii) ∼11.5% in the disordered γ-Fe(Ni, Co) phase, (iv) ∼2.0% in the more ordered γ-Fe(Ni, Co) phase, and (v) ∼0.4% in the paramagnetic γ-Fe(Ni, Co) phase.     

Fe‐bearing phases in a ureilite fragment from the asteroid 2008 TC3 (= Almahata Sitta meteorites): A combined Mössbauer spectroscopy and X‐ray diffraction study

The iron‐bearing phases in a ureilite fragment (AS#051) from the Almahata Sitta meteorite are studied using Mössbauer spectroscopy, X‐ray diffraction (XRD), and electron microprobe analysis (EMPA). AS#051 has a typical ureilite texture of medium‐ to coarse‐grained silicates (olivine, orthopyroxene, and pigeonite) with minor opaques (Fe‐Ni metal, troilite, and graphite). The silicate compositions, determined by EMPA, are homogeneous: olivine (Fo_90.2), orthopyroxene (En_86.3Fs_8.6Wo_5.1), and pigeonite (En_81.6Fs_8.9Wo_9.5), and are similar to those of magnesian ureilites. The modal abundance of mineral phases was determined by Rietveld refinement of the powder XRD data. The Mössbauer spectra at 295 K and 78 K are composed of two sharp well‐defined paramagnetic doublets superimposed on a well‐resolved magnetic sextet and other weak absorption features. The two paramagnetic doublets are assigned to olivine and pyroxene (orthopyroxene and pigeonite), and the ferromagnetic sextet to kamacite (magnetic hyperfine field ≈ 33.2 T), in agreement with the XRD characterization. The Mössbauer results also show the presence of small amounts of troilite (FeS) and cohenite ([Fe,Ni,Co]₃C). Using the Mössbauer data, the relative abundance of each Fe‐bearing phase is determined and compared with the results obtained by XRD.     

Frontier Mountain 93001: A coarse‐grained,enstatite‐augite‐oligoclase‐rich,igneous rock from the acapulcoite‐lodranite parent asteroid

Abstract— The Frontier Mountain (FRO) 93001 meteorite is a 4.86 g fragment of an unshocked, medium‐ to coarse‐grained rock from the acapulcoite‐lodranite (AL) parent body. It consists of anhedral orthoenstatite (Fs_{13.3 ± 0.4}Wo_{3.1 ± 0.2}), augite (Fs_{6.1 ± 0.7}Wo_{42.3 ± 0.9}; Cr₂O₃ = 1.54 ± 0.03), and oligoclase (Ab_{80.5 ± 3.3}Or_{3.1 ± 0.6}) up to >1 cm in size enclosing polycrystalline aggregates of fine‐grained olivine (average grain size: 460 ± 210 μm) showing granoblastic textures, often associated with Fe,Ni metal, troilite, chromite (cr# = 0.91 ± 0.03; fe# = 0.62 ± 0.04), schreibersite, and phosphates. Such aggregates appear to have been corroded by a melt. They are interpreted as lodranitic xenoliths. After the igneous (the term “igneous” is used here strictly to describe rocks or minerals that solidified from molten material) lithology intruding an acapulcoite host in Lewis Cliff (LEW) 86220, FRO 93001 is the second‐known silicate‐rich melt from the AL parent asteroid. Despite some similarities, the silicate igneous component of FRO 93001 (i.e., the pyroxene‐plagioclase mineral assemblage) differs in being coarser‐grained and containing abundant enstatite. Melting‐crystallization modeling suggests that FRO 93001 formed through high‐degree partial melting (≥35 wt%; namely, ≥15 wt% silicate melting and ?20 wt% metal melting) of an acapulcoitic source rock, or its chondritic precursor, at temperatures ≥1200 °C, under reducing conditions. The resulting magnesium‐rich silicate melt then underwent equilibrium crystallization; prior to complete crystallization at ?1040 °C, it incorporated lodranitic xenoliths. FRO 93001 is the highest‐temperature melt from the AL parent‐body so far available in laboratory. The fact that FRO 93001 could form by partial melting and crystallization under equilibrium conditions, coupled with the lack of quench‐textures and evidence for shock deformation in the xenoliths, suggests that FRO 93001 is a magmatic rock produced by endogenic heating rather than impact melting.     

The effect of Ni on element partitioning during iron meteorite crystallization

Abstract— ‐Iron meteorites exhibit a large range in Ni concentrations, from only 4% to nearly 60%. Most previous experiments aimed at understanding the crystallization of iron meteorites have been conducted in systems with about 10% Ni or less. We performed solid metal/liquid metal experiments to determine the effect of Ni on partition coefficients for 20 trace elements pertinent to iron meteorites. Experiments were conducted in both the end‐member Ni‐S system as well as in the Fe‐Ni‐S system with intermediate Ni compositions applicable to high‐Ni iron meteorites. The Ni content of the system affects solid metal/liquid metal partitioning behavior. For a given S concentration, partition coefficients in the Ni‐S system can be over an order of magnitude larger than in the Fe‐S system. However, for compositions relevant to even the most Ni‐rich iron meteorites, the effect of Ni on partitioning behavior is minor, amounting to less than a factor of two for the majority of trace elements studied. Any effect of Ni also appears minor when it is compared to the large influence S has on element partitioning behavior. Thus, we conclude that in the presence of an evolving S‐bearing metallic melt, crystallization models can safely neglect effects from Ni when considering the full range of iron meteorite compositions.     

Petrogenesis of anomalous Queen Alexandra Range enstatite meteorites and their relation to enstatite chondrites,primitive enstatite achondrites,and aubrites

Queen Alexandra Range (QUE) meteorite 94204 is an anomalous enstatite meteorite whose petrogenesis has been ascribed to either partial melting or impact melting. We studied the meteorite pairs QUE 94204, 97289/97348, 99059/99122/99157/99158/99387, and Yamato (Y)‐793225; these were previously suggested to represent a new grouplet. We present new data for mineral abundances, mineral chemistries, and siderophile trace element compositions (of Fe,Ni metal) in these meteorites. We find that the texture and composition of Y‐793225 are related to EL6, and that this meteorite is unrelated to the QUEs. The mineralogy and siderophile element compositions of the QUEs are consistent with petrogenesis from an enstatite chondrite precursor. We caution that potential re‐equilibration during melting and recrystallization of enstatite chondrite melt‐rocks make it unreliable to use mineral chemistries to assign a specific parent body affinity (i.e., EH or EL). The QUEs have similar mineral chemistries among themselves, while slight variations in texture and modal abundances exist between them. They are dominated by inclusion‐bearing millimeter‐sized enstatite (average En_99.1–99.5) with interstitial spaces filled predominantly by oligoclase feldspar (sometimes zoned), kamacite (Si approximately 2.4 wt%), troilite (≤2.4 wt% Ti), and cristobalite. Siderophile elements that partition compatibly between solid metal and liquid metal are not enriched like in partial melt residues Itqiy and Northwest Africa (NWA) 2526. We find that the modal compositions of the QUEs are broadly unfractionated with respect to enstatite chondrites. We conclude that a petrogenesis by impact melting, not partial melting, is most consistent with our observations.     

An investigation of the behavior of Cu and Cr during iron meteorite crystallization

Abstract— The measured Cu and Cr contents in magmatic iron meteorites appear to contradict the behavior predicted by experimental fractional crystallization studies currently available. To investigate the origin of Cu and Cr concentrations observed in these meteorites, a thorough set of solid metal/liquid metal experiments were conducted in the Fe‐Ni‐S system. In addition to Cu and Cr, partitioning values were also determined for As, Au, Bi, Co, Mo, Ni, Pb, Rh, Ru, Sb, Sn, V, and Zn from the experiments. Experimental results for Cu and Cr showed similar chalcophile partitioning behavior, whereas these elements have differently sloped trends within magmatic iron meteorite groups. Thus, fractional crystallization alone cannot control both the Cu and Cr concentrations in these iron meteorite groups. A simple fractional crystallization model based on our experimental Cu partitioning results was able to match the Cu versus Au trend observed in the S‐poor IVB iron meteorite group but not the decreasing Cu versus Au trends in the IIAB and IIIAB groups or the unique S‐shaped Cu versus Au trend in the IVA group. However, the crystallization model calculations were found to be very sensitive to the specific choice for the mathematical expression of D(Cu), suggesting that any future refinement of the parameterization of D(Cu) should include a reassessment of the Cu fractional crystallization trends. The Cr versus Au trends in magmatic iron meteorite groups are steeper than those of Cu and not explained by fractional crystallization. Other influences, such as the removal of chromite from the crystallizing system or sampling biases during iron meteorite compositional analyses, are likely responsible for the Cr trends in magmatic iron meteorite groups.