Surface faulting in Norcia (central Italy): a “paleoseismological perspective”

We carried out paleoseismological analyses in Norcia, one of the oldest town of central Italy. Four trenches were dug in late Pleistocene–Holocene deposits, across an unmapped, antithetic splay of the Norcia Fault System. The investigated fault runs through the recent settlement of the town, brushing against the middle-age city walls. We found evidence of repeated surface ruptures in the past 20 ky, the last one dated to a period fitting with the 1703 AD, catastrophic earthquake (M = 6.8). Our data (i) show definitively the late Pleistocene–Holocene activity of the Norcia Fault System, (ii) strengthen the historical accounts describing surface ruptures during the 1703 event in Norcia, (iii) cast light on the seismogenic behavior of the 70-km-long fault system between L'Aquila and Norcia (central Italy) and (iv) predict the occurrence of normal surface faulting inside the municipality of Norcia during future M ≥ 6 earthquakes.     

Limestone of the Daiichi Kashima Seamount and the fate of a subducting guyot: fact and speculation from the Kaiko “Nautile” dives

The Daiichi-Kashima Seamount subducting in the Japan Trench has two reef-capped flat tops with different depths, which are bounded by a nearly straight scarp. The western (inboard) crest is 5300–5450 m deep, and the eastern (outboard) one is 3880–4000 m deep.

A variety of shallow-water reefoid limestones studied by the Kaiko “Nautile” dives not only confirms the similarity in thickness and lithologies, but also establishes an approximate biostratigraphic correlation between the two reefoid caps, based for the first time on the orbitolinid foraminifers (Orbitolina (Mesorbitolina) parva from the western block and O. (M.) texana from the eastern block).

This conclusion supports the interpretation that the present topography of the seamount has resulted from a subduction-induced faulting of a once single reef-capped guyot. A plausible scenario of the fate of a subducting Early Cretaceous guyot in the Western Pacific is outlined as exemplified by the Daiichi-Kashima Seamount.     

Compositional classification of “kimberlitic” and “non-kimberlitic” ilmenite

Ilmenite is one of the common kimberlitic indicator minerals recovered during diamond exploration, and its distinction from non-kimberlitic rock types is important. This is particularly true for regions where these minerals are present in relatively low abundance, and they are the dominant kimberlitic indicator mineral recovered. Difficulty in visually differentiating kimberlitic from non-kimberlitic ilmenite in exploration concentrates is also an issue, and distinguishing kimberlitic ilmenite from those derive from other similar rocks, such as ultramafic lamprophyres, is practically impossible. Ilmenite is also the indicator mineral whose compositional variety has the most potential to resolve provenance issues related to mineral dispersions with contributions from multiple kimberlite sources.

Various published data sets from selected kimberlitic (including kimberlites, lamproites, and various ultramafic lamprophyres) and non-kimberlitic rock types have been compiled and evaluated in terms of their major element compositions. Compositional fields and bounding reference lines for ilmenites derived from kimberlites (sensu stricto), ultramafic lamprophyres, and other non-kimberlitic rock types have been defined primarily on MgO–TiO₂ graphs as well as MgO–Cr₂O₃ relationships.     

Reply to comments by H. Mashima on ‘Evolution of the eastern margin of Korea: constraints on the opening of the East Sea (Japan Sea)’ by Kim et al. [Tectonophysics 436 (2007) 37–55]

We thank H. Mashima for his interest in our recent article in Tectonophysics [Kim, H.J., Lee, G.H., Jou, H.T., Cho, H.M., Yoo, H.S., Park, G.T., Kim, J.S., 2007, Evolution of the eastern margin of Korea: Constraints on the opening of the East Sea (Japan Sea). Tectonophysics 436, 37–55.] and welcome the opportunity to respond to his comments. In our article we suggested that the southern part of the East Sea (Japan Sea) opened principally in the southeast direction in response to the northwestward subduction of the Pacific Plate beneath the Japan Arc. In contrast, Mashima claims that the opening of the East Sea was achieved in the south–southeast direction. However, there are many crucial things in his comments that we find scientifically unconvincing and misleading. In this reply, we give a detailed response to his comments.     

Evolution of paleostress fields and brittle deformation of the Tornquist Zone in Scania (Sweden) during Permo-Mesozoic and Cenozoic times

The NW-SE oriented Sorgenfrei–Tornquist Zone (STZ) has been thoroughly studied during the last 25 years, especially by means of well data and seismic profiles. We present the results of a first brittle tectonic analysis based on about 850 dykes, veins and minor fault-slip data measured in the field in Scania, including paleostress reconstruction. We discuss the relationships between normal and strike-slip faulting in Scania since the Permian extension to the Late Cretaceous–Tertiary structural inversions. Our paleostress determinations reveal six successive or coeval main stress states in the evolution of Scania since the Permian. Two stress states correspond to normal faulting with NE-SW and NW-SE extensions, one stress state is mainly of reverse type with NE-SW compression, and three stress states are strike-slip in type with NNW-SSE, WNW-ESE and NNE-SSW directions of compression.The NE-SW extension partly corresponds to the Late Carboniferous–Permian important extensional period, dated by dykes and fault mineralisations. However extension existed along a similar direction during the Mesozoic. It has been locally observed until within the Danian. A perpendicular NW-SE extension reveals the occurrence of stress permutations. The NNW-SSE strike-slip episode is also expected to belong to the Late Carboniferous–Permian episode and is interpreted in terms of right-lateral wrench faulting along STZ-oriented faults. The inversion process has been characterised by reverse and strike-slip faulting related to the NE-SW compressional stress state.This study highlights the importance of extensional tectonics in northwest Europe since the end of the Palaeozoic until the end of the Cretaceous. The importance and role of wrench faulting in the tectonic evolution of the Sorgenfrei–Tornquist Zone are discussed.     

Focal mechanism solution of the Himalayan earthquake of February 14, 1977

Through a closely spaced local network of seismic stations in Himachal Pradesh, India, supplemented by worldwide P-wave first-motion data, the source mechanism of the February 14, 1977 earthquake which occurred very close to the Rawalpindi area in Pakistan has been determined. The fault-plane solution as reported earlier for this event by Seeber and Armbruster (1979) showed thrust faulting. The reliability of their solution has been tested using more P-wave first-motion data from near Indian stations within the epicentral distance of 4°–7°, as well as from distant stations. The inclusion of data from these stations completely changed the type of faulting from thrust to normal type. The new solution parameters have been briefly discussed in relation to the local geological faults/thrusts.     

Subsidence and strike-slip tectonism of the upper continental slope off Manzanillo, Mexico

The direction of convergence between the Rivera and North American plates becomes progressively more oblique (in a counter-clockwise sense as measured relative to the trench-normal direction) northwestward along the Jalisco subduction zone. By analogy to other subduction zones, the forces resulting from this distribution of convergence directions are expected to produce a NW moving, fore-arc sliver and a NW–SE stretching of the fore-arc area. Also, a series of roughly arc parallel strike-slip faults may form in the fore-arc area, both onshore and offshore, as is observed in the Aleutian arc.In the Jalisco subduction zone, the Jalisco block has been proposed to represent such a fore-arc sliver. However, this proposal has encountered one major problem. Namely, right-lateral strike-slip faulting within the fore-arc sliver, and between the fore-arc sliver and the North American plate, should be observed. However, evidence for the expected right-lateral strike-slip faulting is sparse. Some evidence for right-lateral strike-slip faulting along the Jalisco block–North American plate boundary (the Tepic–Zacoalco rift system) has been reported, although some disagreement exists. Right-lateral strike-slip faulting has also been reported within the interior of the Jalisco block and in the southern Colima rift, which forms the SE boundary of the Jalisco block.Threefold, multi-channel seismic reflection data were collected in the offshore area of the Jalisco subduction zone off Manzanillo in April 2002 during the FAMEX campaign of the N/O L'Atalante. These data provide additional evidence for recent strike-slip motion within the fore-arc region of the Jalisco subduction zone. This faulting offsets right-laterally a prominent horst block within the southern Colima rift, from which we conclude that the sense of motion along the faulting is dextral. These data also provide additional evidence for recent subsidence within the area offshore of Manzanillo, as has been proposed.     

On the seismicity and tectonics associated with the Sinkiang—Tibetan region

A plausible seismo-tectonic boundary of the Sinkiang—Tibetan region is defined on the basis of the trend of higher magnitude earthquakes (M7.0) and energy released by them for the period 1905–1965. In order to study the nature of forces at the northwestern and eastern sides of the region focal mechanisms for eleven shocks have been determined using P-wave first-motion directions reported in the Bulletin of the International Seismological Centre (Edinburgh). Of these, seven mechanisms show thrust faulting, three strike-slip and one normal faulting. The sense of motions of underthrusting blocks in thrust-faulting mechanisms for the two sides are directed towards the Sinkiang—Tibetan region. The slip vectors of strike-slip faulting are also in agreement with the direction of movement of thrust faulting. Thus, the seismicity, energy released, slip vectors and the orientation of T-axes reflect that the northwestern and eastern sides of the Sinkiang—Tibetan region are the plausible seismo-tectonic boundary and the major earthquakes and higher crustal thickness are the results of the movements of surrounding plates towards the region.     

Spatial variations in the similarity of earthquake populations: The case of the 1997 Colfiorito–Sellano (northern Apennines, Italy) seismic sequence

The spatial properties of events in the 1997 Colfiorito–Sellano seismic sequence (Northern Apennines, Italy) were investigated using coherence, a parameter derived from seismic moment tensors that quantifies the kinematic similarity between focal mechanisms. The 1997 Colfiorito–Sellano seismic sequence predominantly consists of normal faulting earthquakes, with a few strike-slip and reverse faulting episodes. This kinematic heterogeneity is possibly related to the contemporaneous activity of two different sets of faults: NW–SE normal faults and NNE–SSW sub-vertical faults, the latter inherited from the previous Miocene compressional phase. The study used two independently-derived data sets of the same seismic sequence characterized by a different number of events and by different precision of spatial localisation. Their statistical significances, assessed through a reshuffling procedure, reveal that data sets with at least some hundreds of events and good positional precision are required to obtain significant results through coherence analysis. Results from the better quality data set indicate that this seismic sequence is characterized by a rapid decrease in the kinematic similarity between earthquake pairs within 2 km of separation, particularly along directions sub-perpendicular to the normal fault strike. The decrease rate seems to be controlled by the geometric characteristics of the normal faults, given that the mean along-dip distance between fault segments is 2 km. In proximity to pre-existing tectonic lineaments the relative abundance of strike-slip and reverse faults tends to decrease the kinematic similarity between events but does not influence the coherence decrease rate. The presence of mixed focal mechanisms (normal, reverse and strike-slip) in a single seismic phase implies that mixed fault types are not restricted to polyphase tectonic histories: such heterogeneous kinematics during a single phase may be induced by the presence of inherited discontinuities.     

The Carlés copper–gold–molybdenum skarn (Asturias, Spain): geometry, mineral associations and metasomatic evolution

This paper presents the petrographical, mineralogical and geochemical characteristics of the Carlés Cu–Mo–Au ore deposit, located in the Rio Narcea Gold Belt (Cantabrian zone of the Iberian Massif). It is related to a small postkinematic calc-alkaline monzogranite, which intrudes as a cedar-tree laccolith into the upper siliciclastic Furada Formation (late Silurian age) and the Nieva carbonates (early Devonian age). The Carlés deposit consists mainly of a well-developed exoskarn. The exoskarn is mostly calcic skarn made up of early garnet and pyroxene, and later amphibole, magnetite and sulfides. The presence of magnesian skarn has been recorded on the north side of the intrusion (roof of granitoid). Magnesian skarn consists of olivine, which is partially replaced by diopside and phlogopite and spinel. Close to the igneous rock, skarns are overprinted by strong potassic alteration. The ore is related to the skarn retrogradation and post-skarn veining and faulting. The skarn-related ore consists of earlier, uneconomic magnetite and Fe–As sulfide assemblages and economic Cu–Au–Ag (Bi–Te) assemblages on the eastern and western sides of the contact aureole, and uneconomic Mo and subeconomic Fe–As–Cu–Au–Ag on the northern side of the contact. Later subeconomic Fe–As–Sb–(Zn–Sn–Cu–Au–Ag) assemblages crosscut the granitoid, skarn, marbles and mineral associations developed previously, and are related to younger episodes of fracturing and faulting. Fluid inclusions in the first hydrothermal stage consist of an aqueous solution with significant contents of CO₂, which reach unmixing conditions as a result of a decrease in P–T conditions. This led to two types of solutions, aqueous solutions of moderate to high salinity and hydrocarbon solutions of low salinity. This unmixing phenomenon controlled the first stage of gold precipitation. During the late hydrothermal activity, primary low-salinity-aqueous-carbonic inclusions with contrasting densities are found. They homogenize into vapor, critical or liquid phase. Homogenization temperatures are practically the same in all inclusions, indicating a boiling phenomenon that could control a new precipitation of gold.     

The origin of garnet and clinopyroxene in “depleted” Kaapvaal peridotites

A detailed petrographic, major and trace element and isotope (Re–Os) study is presented on 18 xenoliths from Northern Lesotho kimberlites. The samples represent typical coarse, low-temperature garnet and spinel peridotites and span a P–T range from 60 to 150 km depth. With the exception of one sample (that belongs to the ilmenite–rutile–phlogopite–sulphide suite (IRPS) suite first described by [B. Harte, P.A. Winterburn, J.J. Gurney, Metasomatic and enrichment phenomena in garnet peridotite facies mantle xenoliths from the Matsoku kimberlite pipe, Lesotho. In: Menzies, M. (Ed.), Mantle metsasomatism. Academic Press, London 1987, 145–220.]), all samples considered here have high Mg# and show strong depletion in CaO and Al₂O₃. They have bulk rock Re depletion ages (T_RD) >2.5 Ga and are therefore interpreted as residua from large volume melting in the Archaean. A characteristic of Kaapvaal xenoliths, however, is their high SiO₂ concentrations, and hence, modal orthopyroxene contents that are inconsistent with a simple residual origin of these samples. Moreover, trace element signatures show strong overall incompatible element enrichment and REE disequilibrium between garnet and clinopyroxene. Textural and subtle major element disequilibria were also observed. We therefore conclude that garnet and clinopyroxene are not co-genetic and suggest that (most) clinopyroxene in the Archaean Kaapvaal peridotite xenoliths is of metasomatic origin and crystallized relatively recently, possibly from a melt precursory to the kimberlite.

Possible explanations for the origin of garnet are exsolution from a high-temperature, Al- and Ca-rich orthopyroxene (indicating primary melt extraction at shallow levels) or a majorite phase (primary melting at >6 GPa). Mass balance calculations, however, show that not all garnet observed in the samples today is of a simple exsolution origin. The extreme LREE enrichment (sigmoidal REE pattern in all garnet cores) is also inconsistent with exsolution from a residual orthopyroxene. Therefore, extensive metasomatism and probably re-crystallization of the lithosphere after melt-depletion and garnet exsolution is required to obtain the present textural and compositional features of the xenoliths. The metasomatic agent that modified or perhaps even precipitated garnet was a highly fractionated melt or fluid that might have been derived from the asthenosphere or from recycled oceanic crust. Since, to date, partitioning of trace elements between orthopyroxene and garnet/clinopyroxene is poorly constrained, it was impossible to assess if orthopyroxene is in chemical equilibrium with garnet or clinopyroxene. Therefore, further trace element and isotopic studies are required to constrain the timing of garnet introduction/modification and its possible link with the SiO₂ enrichment of the Kaapvaal lithosphere.     

Cenozoic “radiobarite” occurrences in the Ohře (Eger) Rift, Bohemian Massif: Mineralogical and geochemical revision

Barite occurrences related to the Cenozoic (Late Alpine) low-temperature hydrothermal activity are present in the continental Ohře (Eger) Rift area. A specific, Ra-bearing type of barite has been known under the name “radiobarite” from this area since 1904. Revision of 12 localities revealed the presence of alleged radiobarite only in the Teplice (Lahošť–Jeníkov) and Karlovy Vary areas. Barite from other localities is radium-poor. Barite crystals showing concentric oscillation colour zoning totally prevail. Isomorphous substitution of Sr (X×10⁻¹ to X×wt%), Ca (X×10⁻² wt%) and Fe (X×10⁻¹ wt%) for Ba was proved. Average SrO contents of 0.4 wt% are markedly exceeded in some samples from Lahošť–Jeníkov (max. 3.2 wt%) and Karlovy Vary (max. 4.9 wt%). Besides inclusions of stoichiometric iron disulphide, the same samples also contain iron disulphides with unusual high contents of Co (max. 12.2 wt%) and Ni (max. to 8.4 wt%). Specific activity of ²³⁸U in the studied barites is very low while that of ²²⁶Ra reaches 8 Bq/g in several samples. Therefore, ²²⁶Ra is not in equilibrium with its parent uranium. These “radiobarites” or their parts must be therefore relatively young, not older than 10–15 ka. Very low uranium contents (<0.4 ppm) were also confirmed by neutron activation analyses of barite samples.

Unit-cell dimensions refined from X-ray powder diffraction data do not show any systematic variation with the measured chemical composition. Their values agree with the data given in the literature. Reflection half-widths, however, seem to correlate with chemistry. Peaks are wider in samples from Lahošť–Jeníkov and Karlovy Vary.

Sulphur and oxygen stable isotope compositions of the Cenozoic barite mineralization of Teplice area are very uniform (δ³⁴S values between 3.9‰ and 7.1‰ CDT, and δ¹⁸O values between 6.1‰ and 7.7‰ SMOW), while the barites of Děc˘ín area show more variable sulphur sources. Sulphate derived from sediments of the Tertiary Most Basin seems to dominate for the Teplice area, while Cretaceous sediments are a more probable sulphur source in the Děc˘ín area. Calculation of oxygen isotope composition of hydrothermal fluids based on fluid inclusion homogenization temperatures and barite δ¹⁸O data shows δ¹⁸O_fluid values in the range of meteoric waters or δ¹⁸O – shifted deep circulating meteoric or basinal waters.     

Temporal variation in the geometry of a strike–slip fault zone: Examples from the Dead Sea Transform

The location of the active fault strands along the Dead Sea Transform fault zone (DST) changed through time. In the western margins of Dead Sea basin, the early activity began a few kilometers west of the preset shores and moved toward the center of the basin in four stages. Similar centerward migration of faulting is apparent in the Hula Valley north of the Sea of Galilee as well as in the Negev and the Sinai Peninsula. In the Arava Valley, seismic surveys reveal a series of buried inactive basins whereas the current active strand is on their eastern margins. In the central Arava the centerward migration of activity was followed by outward migration with Pleistocene faulting along NNE-trending faults nearly 50 km west of the center. Largely the faulting along the DST, which began in the early–middle Miocene over a wide zone of up to 50 km, became localized by the end of the Miocene. The subsidence of fault-controlled basins, which were active in the early stage, stopped at the end of the Miocene. Later during the Plio-Pleistocene new faults were formed in the Negev west of the main transform. They indicate that another cycle has begun with the widening of the fault zone. It is suggested that the localization of faulting goes on as long as there is no change in the stress field. The stresses change because the geometry of the plates must change as they move, and consequently the localization stage ends. The fault zone is rearranged, becomes wide, and a new localization stage begins as slip accumulates. It is hypothesized that alternating periods of widening and narrowing correlate to changes of the plate boundaries, manifest in different Euler poles.     

Double-sided onshore–offshore seismic imaging of a plate boundary: “super-gathers” across South Island, New Zealand

Onshore–offshore seismic refraction profiling allows for the determination of crustal and mantle structures in the transition between continental and oceanic environments. Islands and narrow landmasses have the unique geometry of allowing for double-sided onshore–offshore experiments that favor the construction of composite “super-gathers” using the acquisition of onshore–offshore and ocean-bottom seismometer receiver gathers, land explosion shot gathers, and near-vertical incidence multichannel seismic (MCS) profiling. A number of sites at plate boundaries are amenable to the application of double-sided onshore–offshore imaging, including the Indo-Australian/Pacific transform boundary on South Island, New Zealand. By comparing the ratio of island width to mantle refraction (Pn) “maximum” crossover distance, using nondimensional distances, we provide an indicator of raypath “coverage” for crustal illumination. Islands or narrow land masses whose widths are less than twice their maximum crossover distance are candidates for double-sided onshore–offshore experiments. The SIGHT (South Island GeopHysical invesTigation) experiment in New Zealand is located where the width of South Island is sufficiently narrow with respect to its crustal thickness that a double-sided onshore–offshore experiment allows for complete crustal imaging of the associated plate boundary.     

Tectonic evolution of the Mesozoic Verkhoyansk–Kolyma belt (NE Asia)

The Verkhoyansk–Kolyma belt (VK) forms the western part of the Verkhoyansk–Chukotka Mesozoic orogen (NE Asia) and lies between the Siberian craton on the western side, the Mesozoic–Cenozoic Koryak–Kamchatka accretionary orogen on the eastern side, and the Arctic Alaskan craton to the north. The VK results from the collision of the Siberian craton and the Kolyma–Omolon composite terrane (KO), which acted as an indentor resulting the Kolyma orocline. The KO is made up of ophiolite and olistostromal and schistose units that were amalgamated during the Middle–Late Jurassic by thrust and nappe tectonics under greenschist facies metamorphism. This was followed in Latest Jurassic by thrusting and strike-slip faulting related to the collision of the KO composite terrane with the Siberian craton. This collision also produced the Verkhoyansk fold-and-thrust belt in the Siberian continental margin. In the earliest Cretaceous, collision of the Alaskan and Siberian margins resulted in further thrust and strike-slip tectonism.     

Isoprenoid alkanes with irregular “head-to-head” linkages

A lightly biodegraded crude oil from the Tolkinsk field (Upper Jurassic), situated in north-west Siberia, was found to contain a series of C₂₈–C₃₉ isoprenoid alkanes. Most of these components contain a pristane unit linked head-to-head with other isoprenoid units. The structures of these components were elucidated by mass spectral interpretations, comparisons with a synthesised standard and by reference to data published previously in the literature. These results extend the carbon number range, the variety of structural types, and the number of reported occurrences of these compounds in geological samples. These results provide further evidence for a contribution of bacterial cell-wall lipids to crude oils.     

Neotectonic evolution of the Central Betic Cordilleras (Southern Spain)

Paleostress orientations were calculated from fault-slip data of 36 sites located along a traverse through the Central Betic Cordilleras (southern Spain). Heterogeneous fault sets, which are frequent in the area, have been divided into homogeneous subsets by cross-cutting relationships observed in the field and by a paleostress stratigraphy approach applied on each individual fault population. The state of stress was sorted according to main tectonic events and a new chronology is presented of the Miocene to Recent deformation in the central part of the Betic Cordilleras. The deviatoric stress tensors fall into four distinct groups that are regionally consistent and correlate with three Late Oligocene–Aquitanian to Recent major tectonic events in the Betic Cordilleras. The new chronology of the neotectonic evolution includes, from oldest to youngest, the following main tectonic phases:

(1) Late Oligocene–Aquitanian to Early Tortonian: σ₁ subhorizontal N–S, partly E–W directed, σ₃ subvertical; compressional structures (thrusting of nappes, large-scale folding) and strike-slip faulting in the Alborán Domain and the External Zone of the Betic Cordilleras;

(2) Early Tortonian to Pliocene–Pleistocene: σ₁ subvertical, σ₃ subhorizontal NW–SE, partly N–S directed or E–W-directed (radial extension); large-scale normal faulting in the Central Betic Cordilleras and in the oldest Neogene formations of the Granada Basin related to the gravitational collapse of the Betic Cordilleras and the exhumation of the intensely metamorphosed rock series of the Internal Zones, at the same time formation of the Alborán Basin and intramontane basins such as the Granada Basin;

(3) Pleistocene to Recent: (3a) σ₁ subvertical, σ₃ subhorizontal NE–SW with prominent normal faulting, but coevally; (3b) σ₁ subhorizontal NW directed, σ₃ NE–SW subhorizontal with strike-slip faulting. Extensional structures and strike-slip faulting are related to the ongoing convergence of the Eurasian and African Plates and coeval uplift of the Betic Cordilleras. Reactivation of pre-existing fractures and faults was frequently observed. Phase 3 is interpreted as periodic strike-slip and normal faulting events due to a permutation of the principal stress axes, mainly σ₁ and σ₂.

Sources of Mw 5+ earthquakes in northeastern Italy and western Slovenia: An updated view based on geological and seismological evidence

We present an overview of the seismogenic sources of northeastern Italy and western Slovenia, included in the last version of the Database of Individual Seismogenic Sources (DISS 3.0.2) and a new definition of the geometry of the Montello Source that will be included in the next release of the database. The seismogenic sources included in DISS are active faults capable of generating M_w > 5.5 earthquakes. We describe the method and the data used for their identification and characterization, discuss some implications for the seismic hazard and underline controversial points and open issues.In the Veneto–Friuli area (NE Italy), destructive earthquakes up to M_w 6.6 are generated by thrust faulting along N-dipping structures of the Eastern Southalpine Chain. Thrusting along the mountain front responds to about 2 mm/a of regional convergence, and it is associated with growing anticlines, tilted and uplifted Quaternary palaeolandsurfaces and forced drainage anomalies. In western Slovenia, dextral strike–slip faulting along the NW–SE trending structures of the Idrija Fault System dominates the seismic release. Activity and style of faulting are defined by recent earthquakes (e.g. the M_s 5.7, 1998 Bovec–Krn Mt. and the M_w 5.2, 2004 Kobarid earthquakes), while the related recent morphotectonic imprint is still a debated matter.We reinterpreted a large set of tectonic data and developed a segmentation model for the outermost Eastern Southalpine Chain thrust front. We also proposed the association of the four major shocks of the 1976 Friuli earthquake sequence with individual segments of three major thrust fronts. Although several sub-parallel active strike–slip strands exist in western Slovenia, we were able to positively identify only two segments of the Idrija Fault System. A comparison of the regional GPS velocity with long-term geological slip-rates of the seismogenic sources included in DISS shows that from a quarter to half of the deformation is absorbed along the external alignment of thrust faults in Veneto and western Friuli. The partitioning of the deformation in western Slovenia among the different strike–slip strands could not be quantified.     

A pulsed extension model for the Neogene–Recent E–W-trending Alaşehir Graben and the NE–SW-trending Selendi and Gördes Basins, western Turkey

We have developed a significant body of new field-based evidence relating to the history of crustal extension in western Turkey. We establish that two of the NE–SW-trending basins in this region, the Gördes and Selendi Basins, whose sedimentary successions begin in the early Miocene, are unlikely to relate to late-stage Alpine compressional orogeny or to E–W extension of Tibetan-type grabens as previously suggested. We argue instead that these basins are the result of earlier (?) late Oligocene, low-angle normal faulting that created approximately N–S “scoop-shaped” depressions in which clastic to lacustine and later tuffaceous sediments accumulated during early–mid-Miocene time, separated by elongate structural highs. These basins were later cut by E–W-trending (?) Plio–Quaternary normal faults that post-date accumulation of the Neogene deposits. In addition, we interpret the Alaşehir (Gediz) Graben in terms of two phases of extension, an early phase lasting from the early Miocene to the (?) late Miocene and a young Plio–Quaternary phase that is still active. Taking into account our inferred earlier phase of regional extension, we thus propose a new three-phase “pulsed extension” model for western Turkey. We relate the first two phases to “roll-back” of the south Aegean subduction zone and the third phase to the westward “tectonic escape” of Anatolia.