首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
海底松散沉积物声学性质原位测量实验研究   总被引:5,自引:2,他引:3  
分析研究了国内外海底松散泥沙的声速和声衰减系数测量的研究现状,并据此研制了海底表层沉积物声速声衰减系数原位测量系统。利用原位测量系统分别在实验室和海滩对不同粒度的沉积物进行了测量分析,得到了不同粒度沉积物的声速和声衰减系数。数据分析表明,沉积物的声速和声衰减系数与沉积物的粒径有密切的关系,粒径越粗,声速越高,声衰减系数越大。通过沉积物声学性质研究,可以开发海底浅层沉积物声学性质原位测量技术,提高相关海洋调查的速度和效率。  相似文献   

2.
南黄海海底沉积物声学特性及其影响因素试验研究   总被引:5,自引:2,他引:3  
利用自南黄海中西部海底取回的沉积物样品,对其声学特性及其影响因素进行了试验研究,结果显示,研究区海底沉积物的压缩波速为1.359 ~1.695 km/s,剪切波速为12.5 ~70.9 m/s;颗粒较细的沉积物与较低的压缩波速、剪切波速对应,主要集中在研究区东侧水深较深处;沉积物的物理力学性质对其压缩波速、剪切波速的影响较显著,沉积物的温度和换能器的频率对上述声学两参数也具有一定的影响,而沉积物的包含物及薄夹层等影响声波传播的理论计算结果。给出了研究区海底沉积物物理力学各参数与压缩波速、剪切波速之间的回归方程,以期为国防、工程提供基础资料。  相似文献   

3.
海底表层沉积物具有多相、多颗粒、多形态的组成结构,导致其声学特性复杂多样。通过分析压缩波速度和切变波速度特性的研究现状,指出有待于解决的科学问题和关键技术问题。在分析国内外有关海底沉积层声速特性研究基础上,提出采取系统、可控的实验测量手段解决当前测量存在的4点问题。综合分析了压缩波速度和切变波速度存在的统计回归关系和理论分析关系,探讨了当前地声反演、采样样品声学测量、原位声学测量3种方法存在的测量尺度、测量频率、测量状态等的差异,探讨建立不同测量方法和测量技术对测量结果进行统一性解释的方法,从而获得不同类型、不同区域的海底表层沉积物真实的声速特性。最后,从实验室声学测量、物理力学参数测量、流固耦合特性分析、原位测量及海底监测、采样测量与原位测量的误差分析及校正、海底大纵深声学测量6个方面提出技术需求,为提高声学探测海洋和海底的精度服务,推动海洋声学探测和海洋工程发展。  相似文献   

4.
Seabed sediment microstructure has an influence on its acousto-physical properties, and the properties in a length of the sediment column reflect an aspect of the macroscopic behavior of the microstructure. An original measurement method of the sound attenuation within small distance cross sections in a sediment column, and the corresponding approach in data processing to attain an attenuation factor are detailed in the paper. This method was used to measure the compressional wave in series of points with a small distance in the sediment column, and it is shown that exponential attenuation is a type of compressional wave attenuation model for a sediment column in its full length. It indicates that there are various models of compressional wave attenuation in seabed sediments in the South China Sea after comparison of data from other literature. The method of measuring sound attenuation satisfies the sampling space interval in the acoustical forward and inverse problems in seabed sediments, and the original method provides a new approach for finding out sound attenuation mechanism in seabed sediments on small length scale.  相似文献   

5.
The problem of rapid classification of the sea-floor sediment is addressed using horizontal line array (HLA) acoustic data from a passing surface ship. The data are beamformed to improve signal-to-noise ratio. The rapid geoacoustic characterization (RGC) algorithm involves extracting acoustic observables from the data (normalized striation slope, time spread, and transmission-loss slope). A simple single homogenous sediment layer over an acoustic half-space model is used to compute forward estimates of the acoustic observables. An exhaustive search over the two-parameter model is performed. The two parameters searched over are the sediment compressional speed (Cp), which is a polynomial function of the mean grain size (/spl phi/), and sediment thickness (H). This approach provides a real-time technique for classifying the sediment in a way that successfully reproduces the basic physics of propagation.  相似文献   

6.
High-resolution seismic survey and sediment core sampling were conducted to investigate acoustic characteristics of gas-bearing sediments in Jinhae Bay, the southeast of Korea. The sediment in Jinhae Bay is mostly homogenous mud deposited after the Holocene transgression. Along with the 410 km of chirp seismic profiling, five piston core samples were collected on the track lines.

Gassy sediments are common and occur widely in the bay. Core samples were analyzed for sediment texture, physical properties (porosity, water content, bulk density, and grain density), acoustic properties (compressional wave velocity and attenuation), and electrical resistivity. X-radiograph image analysis was also performed to observe the shape of degassing cracks. There is no significant downcore variation on physical and sediment textures regardless of existence of gas bubbles. However, compressional wave velocity dramatically decreases from average 1480 to 1380~739 m/s for the cores that penetrate the gas-bearing zones. This is probably due to degassying cracks that developed by escaping gases and free gas bubbles that are still trapped in the cores. Electrical resistivity is the only geotechnical property that increases in the gas-bearing zone where compressional wave velocity abruptly decreases. This indicates the possibility of using both electrical resistivity as an index variable as well as to compressional wave velocity to identify gassy sediment microstructure because there are little changes in texture and composition of sediment.  相似文献   

7.
Geoacoustic inversion requires a generic knowledge of the frequency dependence of compressional wave properties in marine sediments, the nature of which is still under debate. The use of in situ probes to measure sediment acoustic properties introduces a number of experimental difficulties that must be overcome. To this end, a series of well-constrained in situ acoustic transmission experiments were undertaken on intertidal sediments using a purpose-built in situ device, the Sediment Probing Acoustic Detection Equipment (SPADE). Compressional wave speed and attenuation coefficient were measured from 16 to 100 kHz in medium to fine sands and coarse to medium silts. Spreading losses, which were adjusted for sediment type, were incorporated into the data processing, as were a thorough error analysis and an examination of the repeatability of both the acoustic wave emitted by the source and the coupling between probes and sediment. Over the experimental frequency range and source-to-receiver (S-R) separations of 0.99-8.1 m, resulting speeds are accurate to between 1.1% and 4.5% in sands and less than 1.9% in silts, while attenuation coefficients are accurate to between 1 and 7 dBm in both sands and silts. Preliminary results indicate no speed dispersion and an attenuation coefficient that is proportional to frequency.  相似文献   

8.
Abstract

The superficial marine sediment is an important boundary of ocean acoustic propagation. So, the acoustic property of seafloor surface is always research hotspot. The acoustic property of sediment is affected by temperature and pressure which is not considered by conventional lab acoustic measurement. A new type of system, called “Small-scale Geo-acoustic Physical Model Pilot System” (SGPMP) has been developed. The system measures geo-acoustic property of sediment under specific temperature, pressure and frequency conditions which can be controlled conveniently and accurately. The components, structure, measurement principle, error analysis and application example of this system are introduced in this article. As a laboratory platform, the system makes it convenient for us to study the relationship between the temperature, pressure, frequency and acoustic properties of marine sediment.  相似文献   

9.
 Near-surface sediment geoacoustic and physical properties were measured from a variety of unconsolidated carbonate sediments in the Lower Florida Keys. Surficial values of compressional and shear speed correlate with sediment physical properties and near-surface acoustic reflectivity. Highest speeds (shear 125–150 m s-1; compressional 1670–1725 m s-1) are from sandy sediments near Rebecca Shoal and lowest speeds (shear 40–65 m s-1; compressional 1520–1570 m s-1) are found in soft, silty sediments which collect in sediment ponds in the Southeast Channel of the Dry Tortugas. High compressional wave attenuation is attributed to scattering of acoustic waves from heterogeneity caused by accumulation of abundant shell material and other impedance discontinuities rather than high intrinsic attenuation. Compared to siliciclastic sediments, carbonate sediment shear wave speed is high for comparable values of sediment physical properties. Sediment fabric, rather than changes due to the effects of biogeochemical processes, is responsible for these differences.  相似文献   

10.
Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density, compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive, with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths and sensitivities of each approach are explored through simulations guided by experience with measured data.  相似文献   

11.
12.
A new geo-acoustic model for gas-bearing sediment is proposed based on the work of Dvorkin and Prasad, and Biot theory. Only five geophysical parameters: sediment mineral composition, free gas saturation, tortuosity (also known as the structure factor), permeability, and porosity, are considered in the model. A benefit of this model is that we need only five parameters instead of ten parameters in the Biot's formulas for acoustic velocity and attenuation calculation. Here the model is demonstrated with the in-situ experimental data collected from the Hangzhou Bay, China. The results of this study suggest that free gas content in sediment is the most critical condition resulting in a low acoustic velocity (compressional wave). The respective contributions of the other four parameters in the model are also discussed.  相似文献   

13.
Abstract

The high-frequency acoustic properties of seafloor sediments are very significant in seafloor study and underwater acoustic study field. In order to measure the sound speed and the attenuation for the small-scale sediment cores more accurately, this study developed a water coupled acoustic laboratory measurement system based on Richardson-Briggs technique. This method used the correlation comparison of waveforms received in sediment core and in identical reference tubes filled with water to measure sound speed and attenuation. The sound speed and attenuation of a clayey silt sediment sample were measured using the water coupled acoustic laboratory measurement system. This frequency dependence of the sound speed and attenuation showed that the clayey silt sediment has a weak positive sound speed dispersion, while the attenuation increases with a strong positive gradient within the measurement frequency range. This study also noted that the measured sound speed ratio match well with the empirical equations from literature. The measured attenuation factor data can fall in the Hamilton’s empirical prediction range.  相似文献   

14.
In this study an attempt has been made to extract sediment geoacoustic properties using ambient noise measured from a vertical hydrophone array. Time series noise data recorded from three shallow water sites (Chennai, Cuddalore and Cochin) along the Indian continental shelf were used for the analysis. The compressional sound speed of sediment for all the sites was estimated from the vertical directionality of ambient noise. Using the value of the compressional sound speed remaining wave properties and material properties were deduced from the Grain-Shearing (G-S) theory of wave propagation in saturated granular media. The type of sediment extracted from the G-S theory correlates well with the results obtained from sieve and particle size analysis of grab samples, collected from all the sites. The study clearly shows the application of ambient noise in extracting environmental information in shallow water, and further applying it to improve sonar performance modeling.  相似文献   

15.
Using ultrasonic scanning it is possible to display the position of an acoustic discontinuity within a sediment core and the amplitude of the reflected signal which results from it. From these results it has been possible to examine the effect of variations in the geotechnical properties on the reflection of compressional waves at normal incidence within the core at a frequency of 100 kHz. The occurrence of acoustic reflectors in the surface layers of North Atlantic sediments has also been examined.Two ultrasonic scanning systems for the non-destructive testing of marine sediment cores have been developed. The performance of the two systems has been evaluated using the results from measurements made on a suite of marine sediment cores from the North Atlantic in conjunction with X-ray scanning and geological analysis of the same cores.  相似文献   

16.
Acoustic wave fields in an ocean waveguide with a sediment layer having continuously varying density and sound speed overlying an elastic subbottom are considered in this analysis. The objective of this study is to investigate the effects of seabed acoustic properties, including the density and sound speed of the sediment layer and subbottom, on the characteristics of the wave fields. Examination of the reflection coefficient, wavenumber spectrum, and noise intensity of the sound field through numerical analysis has shown that the variation in the acoustic properties in the sediment layer is an important factor in determining the reflected or noise sound fields. In particular, the sediment thickness-to-wavelength ratio and the types of variation of acoustic properties inside the layer give rise to many characteristics that potentially allow for acoustic inversion of the seabed properties. With regard to the wave-field components in a shallow-water environment, the various types of waves existing in a seismo-acoustic waveguide have been illustrated. The results indicate that the effects of the sediment properties on the wavenumber spectrum are primarily on the continuous and evanescent regimes of the wave field. The noise intensity generated by distributive random monopoles at various depths, together with the effect of refractive sound-speed distribution in the water column, has been obtained and analyzed.  相似文献   

17.
Near-surface sediment geoacoustic and physical properties were measured in gas-rich, muddy sediments of Eckernförde Bay, Baltic Sea, and in hard-packed, sandy sediments of the northeastern Gulf of Mexico. Values of compressional and shear wave velocity are much lower in muddy compared to sandy sediments. The spatial and temporal variability of sediment physical and geoacoustic properties and, as a consequence, the scattering and propagation of high-frequency acoustic waves are primarily related to the presence and absence of free methane gas bubbles at the muddy site and to the abundance and distribution of shell material on sandy sediments.  相似文献   

18.
为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。  相似文献   

19.
Eleven seismic reflection profiles across Shirshov Ridge and the adjacent deep-water sedimentary basins (Komandorsky and Aleutian Basins) are presented to illustrate the sediment distribution in the western Bering Sea. A prominent seismic reflecting horizon, Reflector P (Middle—Late Miocene in age), is observed throughout both the Aleutian and Komandorsky Basins at an approximate subbottom depth of 1 km. This reflector is also present, in places, on the flanks and along the crest of Shirshov Ridge. The thickness of sediments beneath Reflector P is significantly different within the two abyssal basins. In the Aleutian Basin, the total subbottom depth to acoustic basement (basalt?) is about 4 km, while in the Komandorsky Basin the depth is about 2 km.Shirshov Ridge, a Cenozoic volcanic feature that separates the Aleutian and Komandorsky Basins, is an asymmetric bathymetric ridge characterized by thick sediments along its eastern flank and steep scarps on its western side. The southern portion of the ridge has more structural relief that includes several deep, sediment-filled basins along its summit.Velocity data from sonobuoy measurements indicate that acoustic basement in the Komandorsky Basin has an average compressional wave velocity of 5.90 km/sec. This value is considerably larger than the velocities measured for acoustic basement in the northwestern Aleutian Basin (about 5.00 km/sec) and in the central Aleutian Basin (5.40–5.57 km/sec). In the northwestern Aleutian Basin, the low-velocity acoustic basement may be volcaniclastic sediments or other indurated sediments that are overlying true basaltic basement. A refracting horizon with similar velocities (4.6–5.0 km/sec) as acoustic basement dips steeply beneath the Siberian continental margin, reaching a maximum subbottom depth of about 8 km. The thick welt of sediment at the base of the Siberian margin may be the result of sediment loading or tectonic depression prior to Late Cenozoic time.  相似文献   

20.
In recent years, interface waves such as the Scholte wave have become important tools in the study of the geoacoustic properties of near-bottom seafloor sediments. Traditionally, these waves have been generated by explosive or pneumatic sources deployed at or near the seafloor and monitored by ocean-bottom seismographs or geophone arrays. While these sources generate the requisite interface waves, they also produce higher frequency compressional waves in the water and sediment that tend to contaminate the surface wave and make inversion of the data difficult in the near field. In this paper, a new source consisting of a freely falling projectile instrumented with an accelerometer is described. When the projectile impacts the bottom, the exact time history of the vertical force applied to the sediment is known and therefore may be convolved with the transfer function of a sediment geoacoustic model to produce accurate synthetic seismograms. Moreover, the vertical force applied to the seafloor is very efficient in generating surface wave motion while producing very little compressional wave energy so that the near-field signals are much more easily analyzed. An example of the use of the new source is presented including inversion of the received signals to obtain shear-wave velocity and attenuation as a function of depth in the near bottom sediments at a shallow-water site  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号