共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
应用地质统计方法研究渗透系数场的空间变异性。利用MMR含水层场地实测数据,通过去类分析、特异值处理、正态变换,逐步逼近研究区渗透系数的稳健变差函数,得到三维渗透系数场的几何各向异性套合模型。在此基础上,采用普通克里格法和指示克里格法、高斯序列模拟法和指示序列模拟法分别对数据进行插值和条件模拟。最后结合具体的地质条件,对四种方法在渗透系数场生成中的应用进行对比分析和评价。 相似文献
3.
岩土力学参数空间变异性的集合卡尔曼滤波估值 总被引:3,自引:1,他引:2
岩土参数具有结构性和随机性的空间变异特征,该特征导致岩土参数具有不确定性。以地质统计学作为岩土参数空间变异性分析的理论基础,将分布于研究区的岩土参数视为区域化变量,变异函数既描述了岩土参数整体的空间结构性变化,又描述了其局部的随机性变化,用变异函数理论模型作为描述岩土参数空间变异规律的数学模型。引入集合卡尔曼滤波(EnKF)分析方法,利用时空分布的观测数据,对岩土参数空间变异性进行估值。数值算例表明,EnKF能够有效地融合观测数据,较好地提供岩土参数空间变异性的估值。 相似文献
4.
地质统计学是用于模拟土体固有空间变异性的方法之一,以变差函数为工具,采用Kriging插值提供未采样点处土工参数值的最优线性无偏估计。将地质统计学方法应用于宿-新(宿迁至新沂)高速公路某试验段内孔压静力触探(piezocone penetration test,CPTU)锥尖阻力qt空间变异性研究中,采用回归分析移除数据中的趋势项,从而获得具有弱平稳性的残差数据。指数型理论变差函数能够准确描述试验段内土体的连续空间变异性特征。根据估计结果,试验段内锥尖阻力qt残差的变程具有显著各向异性,在水平方向和竖直方向分别为4.05 m和1.2 m。采用普通Kriging插值结合趋势分析,绘制了qt在试验段的空间分布图和平面投影图,用于指导工程实践。结果表明,普通Kriging插值的估计结果能够与试验段内实测资料形成较好的对比,仅仅在部分极值变化和远离采样点的位置处估计值可靠性会降低。 相似文献
5.
《物探化探计算技术》2015,(3)
西藏甲玛铜多金属矿矿区元素分布复杂,传统的地质统计学方法对其进行储量估算时忽略了多金属的相互影响,因此为了反映出不同金属元素的空间变异情况,采用协同克里格法对该矿区的金属元素储量进行估算。这里首先介绍了协同克里格算法的相关理论和相关技术,然后以此为基础,对不同方向上的空间变差函数进行结构套合的优化,并对协同克里格方程组进行降维处理。最后以2012年甲玛矿区勘探工程的数据为例,以Cu为主区域化变量,以Ag为协同区域化变量,计算了各自的实验变差函数和交差实验变差函数,分别进行协同克里格法插值和普通克里格法插值。交叉验证结果表明,协同克里格估值的标准差为0.6477,在储量计算上面精度更高,并能广泛应用于西藏甲玛铜多金属矿的地质属性、储量估算等空间数据建模。 相似文献
6.
岩土参数具有结构性和随机性的空间变异特征,该特征导致岩土参数具有不确定性。以地质统计学作为岩土参数空间变异性分析的理论基础,将分布于研究区的岩土参数视为区域化变量,变异函数既描述了岩土参数整体的空间结构性变化,又描述了其局部的随机性变化,用变异函数理论模型作为描述岩土参数空间变异规律的数学模型。引入集合卡尔曼滤波(EnKF)分析方法,利用时空分布的观测数据,对岩土参数空间变异性进行估值。数值算例表明,EnKF能够有效地融合观测数据,较好地提供岩土参数空间变异性的估值。 相似文献
7.
濮城沙三中油藏具有两个主物源,分别为NE向与SE向。油藏数值模拟需要在一套地质网格中对其进行模拟。经典的地质统计学利用变差函数描述区域化变量的空间几何结构特性。变差函数的计算是基于两点进行统计的,对其描述主要涉及方位角、变程、块金值和基台值。为了在一套模拟网格中模拟出多个物源条件下储层的分布特征,必须在不同的位置设置不同的变差函数参数。文中给出了两种方法实现这一目的:一是采用人为分区,把不同物源影响的区域分成不同的区块,分别对不同的区块设置不同的变差函数参数;二是采用变方位角,即根据不同的位置设置不同的变差函数方位角。这两种方法都实现了在一套网格中模拟具有多个物源方向的储层分布,更真实地再现了储层的空间展布特征。 相似文献
8.
地质统计学在德兴铜矿储量计算中的应用 总被引:1,自引:0,他引:1
地质统计学又称“克立格法”(Kriging).它足以矿石品位和矿床储量的精确估计为主要研究目的,与传统的加权储量计算方法不同,它既考虑到地质变量的随机性,同时也充分反映了它们的空间结构性(相关性).地质统计学研究的主要对象是区域化变量,诸如矿石品位、累积量、矿体厚度、矿石价值、矿石中有害组份的含量等.研究区域化变量空间变异性的基本工具是变异函数(variogram).地质统计学用来进行矿床的储量计算不但能提供在无偏条件下达到估计方差为极小的矿石品位估计值,而且还能给出此种估值的精度.目前,世界上许多国家已成功地应用该法于不同矿种的各种类型储量计算的 相似文献
9.
基于序贯指示模拟方法的火山岩储层岩性及孔隙度模拟 总被引:1,自引:0,他引:1
火山岩组成和结构的复杂性使岩性确定、储层参数计算及其空间分布规律描述都较为困难。以长岭凹陷某区块营城组顶部火山岩为研究对象,以序贯指示模拟为手段,通过单井岩性识别和孔隙度计算及地质变量变异函数中多种参数的选取,对研究区火山岩储层的岩性和孔隙度分布进行三维模拟。研究区发育流纹岩和凝灰岩两种火山岩:流纹岩的孔隙度较小,且变异性较小;凝灰岩的孔隙度偏大,且变异性较大。模拟结果表明:孔隙度的大小及变异性与其构造位置有相关性;位于构造隆起与凹陷处的火山岩孔隙度偏小而变异性较大,而构造斜坡带处火山岩孔隙度偏大,变异性较小。 相似文献
10.
11.
Four variogram models for regional groundwater geochemical data are presented. These models were developed from an empirical study of the sample variograms for more than 10 elements in groundwaters from two geologic regions in the Plainview quandrangle, Texas. A procedure is given for the estimation of the variogram in the isotropic and anisotropic case. The variograms were found useful for quantifying the differences in spatial variability for elements within a geologic unit and for elements in different geologic units. Additionally, the variogram analysis enables assessment of the assumption of statistical independence of regional samples which is commonly used in many statistical procedures. The estimated variograms are used in computation of kriged estimates for the Plainview quadrangle data. The results indicate that an inverse distance weighting model was superior for prediction than simple kriging with the particular variograms used. 相似文献
12.
Positive definiteness is not enough 总被引:2,自引:0,他引:2
M. Armstrong 《Mathematical Geology》1992,24(1):135-143
Geostatisticians know that the mathematical functions chosen to represent spatial covariances and variograms must have the appropriate type of positive definiteness, but they may not realize that there are restrictions on the types of covariances and variograms that are compatible with particular distributions. This paper gives some examples showing that (1) the spherical model is not compatible with the multivariate lognormal distribution if the coefficient of variation is 2.0 or more (even in 1-D), and (2) the Gaussian covariance and several other models are not compatible with indicator random functions. As these examples concern quite different types of random functions, it is clear that there is a general problem of compatibility between spatial covariance models (or variograms) and a specified multivariate distribution. The problem arises with all distributions except the multivariate normal, and not just the two cited here. The need for a general theorem giving the necessary and sufficient conditions for a covariance or a variogram to be compatible with a particular distribution is stressed. 相似文献
13.
Variograms calculated from binary variables, such as from two lithologies, tend to show sinusoidal forms with decreasing amplitudes for increasing lag distances. This cyclicity is observed often when analyzing drill-hole data for rock sequences with alternating lithologies, and the variograms are thus labeled “hole-effect variograms.” Such variograms show a variety of forms: (1) Low to moderate variation in lithologic-body dimensions causes variograms to have strong cyclicity with decaying amplitude. (2) Variograms with one or more peaks and troughs usually result from a binary variable for which lithologies are about equally abundant but possibly large variations exist in the size of lithologic bodies. (3) Variograms show poor cyclicity if one lithology has highly variable body sizes and the other has moderately variable body dimensions. (4) Variograms that attain a plateau at short lag distances represent extremely high or low sandstone fraction, high variability in size of the most abundant lithology, and low variability in the other. Information about the dimensions of lithologic bodies makes it possible to approximate characteristics of the variogram of the lithology variable without numerous wells. Conversely, a hole-effect variogram of lithology may be used to estimate lithologic dimensions. 相似文献
14.
Variograms calculated from binary variables, such as from two lithologies, tend to show sinusoidal forms with decreasing amplitudes for increasing lag distances. This cyclicity is observed often when analyzing drill-hole data for rock sequences with alternating lithologies, and the variograms are thus labeled hole-effect variograms. Such variograms show a variety of forms: (1) Low to moderate variation in lithologic-body dimensions causes variograms to have strong cyclicity with decaying amplitude. (2) Variograms with one or more peaks and troughs usually result from a binary variable for which lithologies are about equally abundant but possibly large variations exist in the size of lithologic bodies. (3) Variograms show poor cyclicity if one lithology has highly variable body sizes and the other has moderately variable body dimensions. (4) Variograms that attain a plateau at short lag distances represent extremely high or low sandstone fraction, high variability in size of the most abundant lithology, and low variability in the other. Information about the dimensions of lithologic bodies makes it possible to approximate characteristics of the variogram of the lithology variable without numerous wells. Conversely, a hole-effect variogram of lithology may be used to estimate lithologic dimensions. 相似文献
15.
Geostatistical analysis of spatial random functions frequently uses sample variograms computed from increments of samples of a regionalized random variable. This paper addresses the theory of computing variograms not from increments but from spatial variances. The objective is to extract information about the point support space from the average or larger support data. The variance is understood as a parametric and second moment average feature of a population. However, it is well known that when the population is for a stationary random function, spatial variance within a region is a function of the size and geometry of the region and not a function of location. Spatial variance is conceptualized as an estimation variance between two physical regions or a region and itself. If such a spatial variance could be measured within several sizes of windows, such variances allow the computation of the sample variogram. The approach is extended to covariances between attributes that lead to the cross-variogram. The case of nonpoint sample support of the blocks or elements composing each window is also included. A numerical example illustrates the application of this conceptualization. 相似文献
16.
17.
Multivariable variogram and its application to the linear model of coregionalization 总被引:1,自引:0,他引:1
In this article, we present the multivariable variogram, which is defined in a way similar to that of the traditional variogram, by the expected value of a distance, squared, in a space withp dimensions. Combined with the linear model of coregionalization, this tool provides a way for finding the elementary variograms that characterize the different spatial scales contained in a set of data withp variables. In the case in which the number of elementary components is less than or equal to the number of variables, it is possible, by means of nonlinear regression of variograms and cross-variograms, to estimate the coregionalization parameters directly in order to obtain the elementary variables themselves, either by cokriging or by direct matrix inversion. This new tool greatly simplifies the procedure proposed by Matheron (1982) and Wackernagel (1985). The search for the elementary variograms is carried out using only one variogram (multivariable), as opposed to thep(p + 1)/2 required by the Matheron approach. Direct estimation of the linear coregionalization model parameters involves the creation of semipositive definite coregionalization matrices of rank 1. 相似文献
18.
Although there are multiple methods for modeling matrix covariance functions and matrix variograms in the geostatistical literature, the linear coregionalization model is still widely used. In particular it is easy to check to ensure whether the matrix covariance function is positive definite or that the matrix variogram is conditionally negative definite. One of the difficulties in using a linear coregionalization model is in determining the number of basic structures and the corresponding covariance functions or variograms. In this paper, a new procedure is given for identifying the basic structures of the space–time linear coregionalization model and modeling the matrix variogram. This procedure is based on the near simultaneous diagonalization of the sample matrix variograms computed for a set of spatiotemporal lags. A case study using a multivariate spatiotemporal data set provided by the Environmental Protection Agency of Lombardy, Italy, illustrates how nearly simultaneous diagonalization of the empirical matrix variograms simplifies modeling of the matrix variograms. The new methodology is compared with a previous one by analyzing various indices and statistics. 相似文献
19.
对以往花岗岩类的地质环境分类分析,可以归纳出分别强调时间和空间作为分类原则的二大类,花岗岩类的岩石学特征及成因随时空环境而有规律演变,其地质环境分类的原则应同时包括时间和空间二大因素。在此基础上,提出了花岗岩类的时空分类。 相似文献