OPTIMIZED FAST HANKEL TRANSFORM FILTERS1

In the linear digital filter theory for calculation of Hankel transforms it is possible to find explicit series expansions for the filter coefficients. A method is presented for optimizing the Hankel filters calculated in this way. For a certain desired accuracy of computation, the sampling density and filter length are minimized by choosing the parameters determining the filter characteristics according to the analytical properties of the input function. A new approach to the calculation of the filter coefficients has been developed for these optimized filters. The length of the filters may be further reduced by introducing a shift in the sampling scheme.     

New digital linear filters for Hankel J0 and J1 transforms

The numerical evaluation of certain integral transforms is required for the interpretation of some geophysical exploration data. Digital linear filter operators are widely used for carrying out such numerical integration. It is known that the method of Wiener–Hopf minimization of the error can be used to design very efficient, short digital linear filter operators for this purpose. We have found that, with appropriate modifications, this method can also be used to design longer filters. Two filters for the Hankel J₀ transform (61-point and 120-point operators), and two for the Hankel J₁ transform (47-point and 140-point operators) have been designed. For these transforms, the new filters give much lower errors compared to all other known filters of comparable, or somewhat longer, size. The new filter operators and some results of comparative performance tests with known integral transforms are presented. These filters would find widespread application in many numerical evaluation problems in geophysics.     

A DIGITAL LINEAR FILTER FOR RESISTIVITY SOUNDING WITH A GENERALIZED ELECTRODE ARRAY*

This paper presents a digital linear filter which maps composite resistivity transforms to apparent resistivities for any four—electrode array over a horizontally layered earth. A filter is provided for each of three sampling rates; the choice of filter will depend on resistivity contrasts and computational facilities. Two methods of filter design are compared. The Wiener-Hopf least-squares method is preferable for low sampling rate filters. The Fourier transform method is more successful in producing a filter with a high sampling rate which can handle resistivity contrasts of 100 000: 1.     

Contribution of the relative velocity between source and receivers to electromagnetic fields in the sea

The analysis of the primary electromagnetic fields caused by steady state or transient electric current flowing along a current loop moving with a constant velocity below the sea surface has several applications. It supports the analysis of submarine physical data and it is useful for protecting ships from the threat of sea mines. The usual approach to the solution for the primary field starts from a hertz vector potential in the frequency domain due to a magnetic dipole. Subsequently it employs Fourier, Laplace, and Hankel transforms to describe the time variation of the primary electromagnetic induced field due to a loop. The result is applicable to both shallow and deep sea water environments. Because of the difference in velocity between source and receiver, a careful application of the convolution integral is necessary in order to adapt the source pulse solution to any type of transmitting current waveform. Furthermore, since the scattered field represents a fraction of the primary field, even minor differences in it caused by the differential velocity renders inadequate interpretation of EMI data.     

THE DETERMINATION OF FILTER COEFFICIENTS FOR THE COMPUTATION OF STANDARD CURVES FOR DIPOLE RESISTIVITY SOUNDING OVER LAYERED EARTH BY LINEAR DIGITAL FILTERING *

The technique of linear digital filtering developed for the computation of standard curves for conventional resistivity and electromagnetic depth soundings is applied to the determination of filter coefficients for the computation of dipole curves from the resistivity transform function by convolution. In designing the filter function from which the coefficients are derived, a sampling interval shorter than the one used in the earlier work on resistivity sounding is found to be necessary. The performance of the filter sets is tested and found to be highly accurate. The method is also simple and very fast in application.     

谐变磁偶极激发下层状介质中球的电磁响应

本文在前人基础上,从理论计算角度研究了两层大地下球形导电体的偶极激发音频电磁场。探讨了电模式、磁模式场的耦合及其意义,并列出了剖面数据和频率响应数据,以适应移动源音频电磁法的实际需要。     

层状介质中水平磁偶极子电磁场空间分布特征

针对岩层中介电常数和磁导率随深度变化的情况,给出水平磁偶极子源电磁场的水平或垂直空间分布特征及相应的变化规律。采用Kong给出的汉克尔（Hankel）J0变换线性滤波器（241点）和汉克尔J1变换线性滤波器（241点）算法,选用均匀大地和两层地电模型,讨论介质的介电常数和磁导率变化时的水平磁偶极子电磁场空间分布特征。计算结果表明,磁场的峨分量幅值与磁导率反相关;磁场H2和电场Ey分量随着磁导率的增大而增大;低频电磁测深中介电常数变化时对电磁场基本没有影响。     

THE ANALYSIS AND DESIGN OF TWO-DIMENSIONAL FILTERS FOR TWO-DIMENSIONAL DATA *

Some of the methods such as regional removal and second derivative calculations which can be used to outline anomalies on potential data maps can be thought of as a filtering operation. The analysis and design of such two-dimensional filters by means of direct and inverse two-dimensional Fourier transforms have been considered. An analysis of several published sets of second derivative coefficient sets indicates that, in general, they are not a good approximation to the theoretical second derivative filter. Alternate methods of designing regional removal and second derivative filters are discussed. The properties of various two-dimensional filters are further illustrated by means of maps obtained from the convolution of several of these filters with a set of observed field data. These maps show the large changes in anomaly shape which can result from the inclusion or rejection of various wavelength components.     

OPTIMIZATION OF SHORT DIGITAL LINEAR FILTERS FOR INCREASED ACCURACY*

The accuracy of short length digital linear filter operators can be substantially increased if the sampling interval as well as the abscissa shift are properly adjusted. This may be done by a trial and error process of adjustment of these parameters until the error made by the filter operator, applied to a suitably chosen test function, is smallest. As an illustration of the application of this method, 7-, 11- and 19-point filters for the calculation of Schlumberger apparent resistivity from a known resistivity transform are designed. Errors with the new 7-point filter are seen to be less than those with a 19-point filter of conventional design. The errors with the new 19-point filter are two to three orders of magnitude smaller than those made by the conventional 19-point filter. The new method should provide digital linear operators that allow significant improvements in accuracy for comparable computation efforts, or substantial reduction in computation for comparable accuracy of results, or something of both.     

电导率各向异性的海洋电磁三维有限单元法正演

本文提出了一种基于非结构化网格的海洋电磁有限单元正演算法.为了回避场源奇异性,文中选用二次场算法,将背景电阻率设置为水平层状且各向异性,场源在水平层状各向异性介质中所激发的一次场通过汉克尔积分得到.基于Coulomb规范得到二次矢量位和标量位所满足的Maxwell方程组,通过Galerkin加权余量法形成大型稀疏有限元方程,采用不完全LU分解(ILU)预条件因子的quasi-minimum residual(QMR)迭代解法对有限元方程进行求解得到二次矢量位和标量位;进而,利用滑动平均方法得到二次矢量位和标量位在空间的导数,由此得到二次电磁场;通过一维模型对算法的可靠性进行验证,与此同时,针对实际复杂海洋电磁模型,比较有限元模拟结果与积分方程模拟结果,进一步验证算法精度.若干计算结果均表明,文中算法具有良好的通用性,适用于井中电磁、航空电磁,环境地球物理等非均匀且各向异性介质中的电磁感应基础研究.     

利用数值积分提高一维模型电偶源电磁测深响应计算精度

讨论了直接利用数值积分提高电偶源电磁测深响应计算精度的方法．具体为对Hankel积分进行直接积分，结合连分式展开方法以提高积分求和的收敛速度．利用该方法对均匀半空间和层状(两层)模型的电磁测深响应进行了模拟，结果表明与常规的快速Hankel滤波方法相比，采用直接数值积分能明显提高电偶源频率测深响应计算精度．从而为获得高精度瞬变测深晚期响应提供算法基础．     

GRAVITY INTERPRETATION USING THE HANKEL TRANSFORM*

The Hankel transform theorem can be applied to the inversion of gravity data for the buried sphere, the horizontal cylinder, and the vertical rod. This new approach leads to exact solutions of the transforms for the assumed bodies. A comparison with the classical procedure by Fourier transform reveals that for the sphere and the vertical rod, the Hankel transform is preferable.     

A FAST ALGORITHM FOR THE COMPUTATION OF RADON TRANSFORMS1

A fast algorithm is presented for numerical evaluation of forward and inverse Radon transforms. The algorithm does not perform exact one-to-one mapping as the discrete Fourier transform but, due to the use of band-limited basis functions, it is robust and sufficiently accurate for seismic applications. By rewriting the transform as a convolution, a computational speed is obtained similar to the speed of the 2D fast Fourier transform.     

THE USE OF FILTERED BESSEL FUNCTIONS IN DIRECT INTERPRETATION OF GEOELECTRICAL SOUNDINGS *

We start from the Hankel transform of Stefanescu's integral written in the convolutionintegral form suggested by Ghosh (1971). In this way it is possible to obtain the kernel function by the linear electric filter theory. Ghosh worked out the sets of filter coefficients in frequency domain and showed the very low content of high frequencies of apparent resistivity curves. Vertical soundings in the field measure a series of apparent resistivity values at a constant increment Δx of the logarithm of electrode spacing. Without loss of information we obtain the filter coefficient series by digital convolution of the Bessel function of exponential argument with sine function of the appropriate argument. With a series of forty-one values we obtain the kernel functions from the resistivity curves to an accuracy of better than 0.5%. With the digital method it is possible to calculate easily the filter coefficients for any electrode arrangement and any cut-off frequency.     

A fundamental solution of a multilayered half-space due to an impulsive ring source

The fundamental solutions of axisymmetric elastodynamic problem for the multilayered half-space due to an impulsive ring source acting within a layered elastic media are derived in time domain with the aid of Laplace–Hankel mixed transform and transfer matrix techniques. In addition, an effective numerical procedure, which utilizes the fast Hankel transform algorithm, is also proposed to calculate these solutions. Illustrative examples have been given to demonstrate that the fundamental solutions can be readily evaluated and the numerical results are of high accuracy. The present solutions can be directly applied to determine the transient wave fields caused by a seismic source and show the potential application to the elastodynamic problems solved by the boundary element method.     

估计辐射参数的井间电磁波层析成像技术

为了避免使用不合理初始辐射场强和方向性因子带来的误差,研究了估计辐射参数的井间电磁波层析成像技术.通过时域有限差分法模拟表明,天线长度与波长的比值、钻孔充填情况、钻孔周围介质的物性均会影响偶极天线的初始辐射场强或方向性因子;为此结合已知的分层资料,将它们设为未知参数,并设定初始辐射场强与发射点位置相关,方向性因子随射线角度而变化;采用正则化反演方法,由钻孔资料建立了模型方差目标函数,使得反演结果与钻遇的地质特征保持一致.通过理论模型试验和实例应用分析表明,相对于传统射线层析成像方法,估计辐射参数的正则化层析成像技术有助于提高反演的准确性.     

Hydroacoustic wave in the external alternating magnetic field

The electromagnetic fields induced by hydroacoustic waves, propagating in a liquid conducting medium in an alternating magnetic field, have been considered. The equation, relating the induced magnetic field to the undisturbed antenna field and acoustic wave parameters, has been obtained. The spatial—temporal pattern of the induced field has been constructed in the case when acoustic wave propagates along a direct line with an alternating current.     

Fast hyperbolic deconvolutive Radon transform using generalized Fourier slice theorem

The hyperbolic Radon transform has a long history of applications in seismic data processing because of its ability to focus/sparsify the data in the transform domain. Recently, deconvolutive Radon transform has also been proposed with an improved time resolution which provides improved processing results. The basis functions of the (deconvolutive) Radon transform, however, are time-variant, making the classical Fourier based algorithms ineffective to carry out the required computations. A direct implementation of the associated summations in the time–space domain is also computationally expensive, thus limiting the application of the transform on large data sets. In this paper, we present a new method for fast computation of the hyperbolic (deconvolutive) Radon transform. The method is based on the recently proposed generalized Fourier slice theorem which establishes an analytic expression between the Fourier transforms associated with the data and Radon plane. This allows very fast computations of the forward and inverse transforms simply using fast Fourier transform and interpolation procedures. These canonical transforms are used within an efficient iterative method for sparse solution of (deconvolutive) Radon transform. Numerical examples from synthetic and field seismic data confirm high performance of the proposed fast algorithm for filling in the large gaps in seismic data, separating primaries from multiple reflections, and performing high-quality stretch-free stacking.     

AN OPTIMIZED DIGITAL FILTER FOR THE FOURIER TRANSFORM*

Short filters for calculating Hankel-transformations, with special attention to the d.c.-sounding problem, have been published in recent years. These filters, with a typical length of less than 25 coefficients, have made it possible to implement, e.g., VES-interpretation programs on microcomputers and 3-D electric and electromagnetic modeling programs on minicomputers. Initially the performance of the short filters was rather poor, but with the introduction of short optimized filters there has been a considerable improvement in the accuracy. An optimization procedure is applied to design a 20-point filter for the Fourier sine-transformation. This filter may be useful in electromagnetic prospecting theory, e.g., in the calculation of the electric and magnetic field from a line source.     

时间域航空电磁2.5维非线性共轭梯度反演

对于时间域航空电磁法二维和三维反演来说,最大的困难在于有效的算法和大的计算量需求.本文利用非线性共轭梯度法实现了时间域航空电磁法2.5维反演方法,着重解决了迭代反演过程中灵敏度矩阵计算、最佳迭代步长计算、初始模型选取等问题.在正演计算中,我们采用有限元法求解拉式傅氏域中的电磁场偏微分方程,再通过逆拉氏和逆傅氏变换高精度数值算法得到时间域电磁响应.在灵敏度矩阵计算中,采用了基于拉式傅氏双变换的伴随方程法,时间消耗只需计算两次正演,从而节约了大量计算时间.对于最佳步长计算,二次插值向后追踪法能够保证反演迭代的稳定性.设计两个理论模型,检验反演算法的有效性,并讨论了选择不同初始模型对反演结果的影响.模型算例表明:非线性共轭梯度方法应用于时间域航空电磁2.5维反演中稳定可靠,反演结果能够有效地反映地下真实电性结构.当选择的初始模型电阻率值与真实背景电阻率值接近时,能得到较好的反演结果,当初始模型电阻率远大于或远小于真实背景电阻率值时反演效果就会变差.