Large-Eddy Simulation of Flow and Pollutant Transports in and Above Two-Dimensional Idealized Street Canyons

A large-eddy simulation (LES) model, using the one-equation subgrid-scale (SGS) parametrization, was developed to study the flow and pollutant transport in and above urban street canyons. Three identical two-dimensional (2D) street canyons of unity aspect ratio, each consisting of a ground-level area source of constant pollutant concentration, are evenly aligned in a cross-flow in the streamwise direction x. The flow falls into the skimming flow regime. A larger computational domain is adopted to accurately resolve the turbulence above roof level and its influence on the flow characteristics in the street canyons. The LES calculated statistics of wind and pollutant transports agree well with other field, laboratory and modelling results available in the literature. The maximum wind velocity standard deviations σ _i in the streamwise (σ _u ), spanwise (σ _v ) and vertical (σ _w ) directions are located near the roof-level windward corners. Moreover, a second σ _w peak is found at z ≈ 1.5h (h is the building height) over the street canyons. Normalizing σ _i by the local friction velocity u _*, it is found that σ _u /u _* ≈ 1.8, σ _v /u _* ≈ 1.3 and σ _w /u _* ≈ 1.25 exhibiting rather uniform values in the urban roughness sublayer. Quadrant analysis of the vertical momentum flux u′′w′′ shows that, while the inward and outward interactions are small, the sweeps and ejections dominate the momentum transport over the street canyons. In the x direction, the two-point correlations of velocity R _v,x and R _w,x drop to zero at a separation larger than h but R _u,x (= 0.2) persists even at a separation of half the domain size. Partitioning the convective transfer coefficient Ω _T of pollutant into its removal and re-entry components, an increasing pollutant re-entrainment from 26.3 to 43.3% in the x direction is revealed, suggesting the impact of background pollutant on the air quality in street canyons.     

Assessment of Gradient-Based Similarity Functions in the Stable Boundary Layer Derived from a Large-Eddy Simulation

Most of our knowledge on forest-edge flows comes from numerical and wind-tunnel experiments where canopies are horizontally homogeneous. To investigate the impact of tree-scale heterogeneities (\({>}1\) m) on the edge-flow dynamics, the flow in an inhomogeneous forest edge on Falster island in Denmark is investigated using large-eddy simulation. The three-dimensional forest structure is prescribed in the model using high resolution helicopter-based lidar scans. After evaluating the simulation against wind measurements upwind and downwind of the forest leading edge, the flow dynamics are compared between the scanned forest and an equivalent homogeneous forest. The simulations reveal that forest inhomogeneities facilitate flow penetration into the canopy from the edge, inducing important dispersive fluxes in the edge region as a consequence of the flow spatial variability. Further downstream from the edge, the forest inhomogeneities accentuate the canopy-top turbulence and the skewness of the wind-velocity components while the momentum flux remains unchanged. This leads to a lower efficiency in the turbulent transport of momentum within the canopy. Dispersive fluxes are only significant in the upper canopy. Above the canopy, the mean flow is less affected by the forest inhomogeneities. The inhomogeneities induce an increase in the mean wind speed that was found to be equivalent to a decrease in the aerodynamic height of the canopy. Overall, these results highlight the importance of forest inhomogeneities when looking at canopy–atmosphere exchanges in forest-edge regions.     

Seasonal and diurnal variations of coherent structures over a deciduous forest

Coherent structures in turbulent flow above a midlatitude deciduous forest are identified using a wavelet analysis technique. Coupling between motions above the canopy (z/h=1.5, whereh is canopy height) and within the canopy (z/h=0.6) are studied using composite velocity and temperature fields constructed from 85 hours of data. Data are classified into winter and summer cases, for both convective and stable conditions. Vertical velocity fluctuations are in phase at both observation levels. Horizontal motions associated with the structures within the canopy lead those above the canopy, and linear analysis indicates that the horizontal motions deep in the canopy should lead the vertical motions by 90°. On average, coherent structures are responsible for only about 40% of overall turbulent heat and momentum fluxes, much less than previously reported. However, our large data set reveals that this flux fraction comes from a wide distribution that includes much higher fractions in its upper extremes. The separation distanceL _s between adjacent coherent structures, 6–10h, is comparable to that obtained in previous observations over short canopies and in the laboratory. Changes in separation between the summer and winter (leafless) conditions are consistent withL _s being determined by a local horizontal wind shear scale.     

珠海凤凰山森林下垫面干季和湿季气象要素的对比分析与动量和感热交换系数的参数化研究

利用珠海凤凰山陆气相互作用观测塔站2014年11月至2016年5月的观测数据,对比分析了干湿季森林下垫面能量通量和气象要素的变化特征,分析了在不同稳定度下3个风向范围（315°～45°、45°～135°和135°～225°）的动量和感热交换系数随冠层表面风速的变化特征,并对动量和感热交换系数进行了参数化研究。结果表明:干季感热和潜热通量值相当,湿季潜热远大于感热。干季和湿季的夜晚都出现负感热现象,感热从大气向森林输送。相对湿度的变化幅度大,与该地气象状况密切相关,相对湿度的垂直梯度夜晚较大,白天较小。干季的气温垂直梯度比湿季的明显。风速在冬季变化平缓,夏季变化剧烈,低层风速随高度变化梯度明显,高层较紊乱。各高度风向差异不大。中性和近中性状态下,在风向为315°～45°、45°～135°和135°～225°时,动量交换系数C_dn分别为0.05、0.0055和0.022,感热交换系数C_hn分别为0.0055、0.003和0.004。在稳定和不稳定状态下,动量交换系数C_d、感热交换系数C_h随冠层表面风速v明显发生变化,稳定条件下,C_d、C_h随v的增大而增大;不稳定条件下,C_d、C_h随v的增大而减小。分不同风向对森林冠层C_d、C_h在稳定和不稳定条件下与v的关系进行了拟合,得到了参数化公式。     

Aerodynamic Scaling for Estimating the Mean Height of Dense Canopies

We used an aerodynamic method to objectively determine a representative canopy height, using standard meteorological measurements. The canopy height may change if the tree height is used to represent the actual canopy, but little work to date has focused on creating a standard for determining the representative canopy height. Here we propose the ‘aerodynamic canopy height’ h _a as the most effective means of resolving the representative canopy height for all forests. We determined h _a by simple linear regression between zero-plane displacement d and roughness length z ₀, without the need for stand inventory data. The applicability of h _a was confirmed in five different forests, including a forest with a complex canopy structure. Comparison with stand inventory data showed that h _a was almost equivalent to the representative height of trees composing the crown surface if the forest had a simple structure, or to the representative height of taller trees composing the upper canopy in forests with a complex canopy structure. The linear relationship between d and z ₀ was explained by assuming that the logarithmic wind profile above the canopy and the exponential wind profile within the canopy were continuous and smooth at canopy height. This was supported by observations, which showed that h _a was essentially the same as the height defined by the inflection point of the vertical profile of wind speed. The applicability of h _a was also verified using data from several previous studies.     

Influence of foliar density and thermal stability on profiles of Reynolds stress and turbulence intensity in a deciduous forest

Observations were made of turbulence in an extensive deciduous forest on level terrain using a vertical array of seven three-dimensional sonic anemometer/thermometers within and above the canopy. Data were collected through the period of leaf fall and over a range of thermal stabilities. A bulk canopy drag coefficient was nearly independent of the density of the forest but decreased greatly with the onset of nocturnal stability. The depth of penetration of momentum into the forest increased with leaf fall but, again, was greatly curtailed by stable conditions. Turbulent velocities decreased with increasing depth in the forest but relative turbulence intensities increased to mid-canopy levels. Leaf density influenced turbulence levels but not as strongly as did thermal stability. Thermal effects were adequately described by the single parameter h/L, where h is the canopy height and L is the Monin-Obukhov length. The longitudinal and vertical velocity correlation coefficient was larger in magnitude than expected in the upper layers of the forest but decreased to a small value in the lowest layers where the Reynolds stress was small. The ratio _w /u ^*, where u ^* is the local friction velocity, reflected changes in the uw correlation, becoming smaller than usual in the upper canopy layers. It is believed that these effects result from the intermittent, spatially coherent structures that are responsible for a large fraction of the momentum flux to the forest.     

Stability Dependence of Canopy Flows over a Flat Larch Forest

The dependence on atmospheric stability of flow characteristics adjacent to a very rough surface was investigated in a larch forest in Japan. Micrometeorological measurements of three-dimensional wind velocity and air temperature were taken at two heights above the forest, namely 1.7 and 1.2 times the mean canopy height h. Under near-neutral and stable conditions, the observed turbulence statistics suggest that the flow was likely to be that of the atmospheric surface layer (ASL) at 1.7h, and of the roughness sublayer (RSL) at 1.2h. However, in turbulence spectra, canopy-induced large coherent motions appeared clearly at both heights. Even under strongly stable conditions, the large-scale motions were retained at 1.2h, whereas they were overwhelmed by small-scale motions at 1.7h. This phenomenon was probably due to the enhanced contribution of the ASL turbulence associated with nocturnal decay of the RSL depth, because the small-scale motions appeared at frequencies close to the peak frequencies of well-known ASL spectra. This result supports the relatively recent concept that canopy flow is a superimposition of coherent motions and the ASL turbulence. The large-scale motions were retained in temperature spectra over a wider region of stability compared to streamwise wind spectra, suggesting that a canopy effect extended higher up for temperature than wind. The streamwise spacing of dominant eddies according to the plane mixing-layer analogy was only valid in a narrow range at near neutral, and it was stabilised at nearly half its value under stable conditions.     

Turbulent Intensities and Velocity Spectra for Bare and Forested Gentle Hills: Flume Experiments

To investigate how velocity variances and spectra are modified by the simultaneous action of topography and canopy, two flume experiments were carried out on a train of gentle cosine hills differing in surface cover. The first experiment was conducted above a bare surface while the second experiment was conducted within and above a densely arrayed rod canopy. The velocity variances and spectra from these two experiments were compared in the middle, inner, and near-surface layers. In the middle layer, and for the canopy surface, longitudinal and vertical velocity variances () were in phase with the hill-induced spatial mean velocity perturbation (Δu) around the so-called background state (taken here as the longitudinal mean at a given height) as predicted by rapid distortion theory (RDT). However, for the bare surface case, and remained out of phase with Δu by about L/2, where L is the hill half-length. In the canopy layer, wake production was a significant source of turbulent energy for , and its action was to re-align velocity variances with Δu in those layers, a mechanism completely absent for the bare surface case. Such a lower ‘boundary condition’ resulted in longitudinal variations of to be nearly in phase with Δu above the canopy surface. In the inner and middle layers, the spectral distortions by the hill remained significant for the background state of the bare surface case but not for the canopy surface case. In particular, in the inner and middle layers of the bare surface case, the effective exponents derived from the locally measured power spectra diverged from their expected  − 5/3 value for inertial subrange scales. These departures spatially correlated with the hill surface. However, for the canopy surface case, the spectral exponents were near  − 5/3 above the canopy though the minor differences from  − 5/3 were also correlated with the hill surface. Inside the canopy, wake production and energy short-circuiting resulted in significant departures from  − 5/3. These departures from  − 5/3 also appeared correlated with the hill surface through the wake production contribution and its alignment with Δu. Moreover, scales commensurate with Von Karman street vorticies well described wake production scales inside the canopy, confirming the important role of the mean flow in producing wakes. The spectra inside the canopy on the lee side of the hill, where a negative mean flow delineated a recirculation zone, suggested that the wake production scales there were ‘broader’ when compared to their counterpart outside the recirculation zone. Inside the recirculation zone, there was significantly more energy at higher frequencies when compared to regions outside the recirculation zone.     

Exploring the Effects of Microscale Structural Heterogeneity of Forest Canopies Using Large-Eddy Simulations

The Regional Atmospheric Modeling System (RAMS)-based Forest Large-Eddy Simulation (RAFLES), developed and evaluated here, is used to explore the effects of three-dimensional canopy heterogeneity, at the individual tree scale, on the statistical properties of turbulence most pertinent to mass and momentum transfer. In RAFLES, the canopy interacts with air by exerting a drag force, by restricting the open volume and apertures available for flow (i.e. finite porosity), and by acting as a heterogeneous source of heat and moisture. The first and second statistical moments of the velocity and flux profiles computed by RAFLES are compared with turbulent velocity and scalar flux measurements collected during spring and winter days. The observations were made at a meteorological tower situated within a southern hardwood canopy at the Duke Forest site, near Durham, North Carolina, U.S.A. Each of the days analyzed is characterized by distinct regimes of atmospheric stability and canopy foliage distribution conditions. RAFLES results agreed with the 30-min averaged flow statistics profiles measured at this single tower. Following this intercomparison, two case studies are numerically considered representing end-members of foliage and midday atmospheric stability conditions: one representing the winter season with strong winds above a sparse canopy and a slightly unstable boundary layer; the other representing the spring season with a dense canopy, calm conditions, and a strongly convective boundary layer. In each case, results from the control canopy, simulating the observed heterogeneous canopy structure at the Duke Forest hardwood stand, are compared with a test case that also includes heterogeneity commensurate in scale to tree-fall gaps. The effects of such tree-scale canopy heterogeneity on the flow are explored at three levels pertinent to biosphere-atmosphere exchange. The first level (zero-dimensional) considers the effects of such heterogeneity on the common representation of the canopy via length scales such as the zero-plane displacement, the aerodynamic roughness length, the surface-layer depth, and the eddy-penetration depth. The second level (one-dimensional) considers the normalized horizontally-averaged profiles of the first and second moments of the flow to assess how tree-scale heterogeneities disturb the entire planar-averaged profiles from their canonical (and well-studied planar-homogeneous) values inside the canopy and in the surface layer. The third level (three-dimensional) considers the effects of such tree-scale heterogeneities on the spatial variability of the ejection-sweep cycle and its propagation to momentum and mass fluxes. From these comparisons, it is shown that such microscale heterogeneity leads to increased spatial correlations between attributes of the ejection-sweep cycle and measures of canopy heterogeneity, resulting in correlated spatial heterogeneity in fluxes. This heterogeneity persisted up to four times the mean height of the canopy (h _c ) for some variables. Interestingly, this estimate is in agreement with the working definition of the thickness of the canopy roughness sublayer (2h _c –5h _c ).     

Flux-gradient profiles for momentum and heat over an urban surface

Summary In this paper, we evaluate the applicability of flux-gradient relationships for momentum and heat for urban boundary layers within the Monin-Obukhov similarity (MOS) theory framework. Although the theory is widely used for smooth wall boundary layers, it is not known how well the theory works for urban layers. To address this problem, we measured the vertical profiles of wind velocity, air temperature, and fluxes of heat and momentum over a residential area and compared the results to theory. The measurements were done above an urban canopy whose mean height z_h is 7.3 m. 3-D sonic anemometers and fine wire thermocouples were installed at 4 heights in the region 1.5z_h < z < 4z_h. We found the following: (1) The non-dimensional horizontal wind speed has good agreement with the stratified logarithmic profile predicted using the semi-empirical Monin-Obukov similarity (MOS) function, when it was scaled by the surface friction velocity that is derived from the shear stress extrapolated to the roof-top level. (2) The scaled gradient of horizontal wind speed followed a conventional semi-empirical function for a flat surface at a level (z/z_h = 2.9), whereas, in the vicinity of the canopy height was larger than the commonly-used empirical relationship. (3) The potential temperature profile above the canopy shows dependency on the atmospheric stability and the scaled gradient of temperature is in good agreement with a conventional shear function for heat. In the case of heat, the dependency on height was not found. (4) The flux-gradient relationship for momentum and heat in the region 1.5z_h < z < 4z_h was rather similar to that for flat surfaces than that for vegetated canopies.     

Spectral Short-circuiting and Wake Production within the Canopy Trunk Space of an Alpine Hardwood Forest

Using synchronous multi-level high frequency velocity measurements, the turbulence spectra within the trunk space of an alpine hardwood forest were analysed. The spectral short-circuiting of the energy cascade for each velocity component was well reproduced by a simplified spectral model that retained return-to-isotropy and component-wise work done by turbulence against the drag and wake production. However, the use of an anisotropic drag coefficient was necessary to reproduce these measured component-wise spectra. The degree of anisotropy in the vertical drag was shown to vary with the element Reynolds number. The wake production frequency in the measured spectra was shown to be consistent with the vortex shedding frequency at constant Strouhal number given by f _vs = 0.21ū/d, where d can be related to the stem diameter at breast height (dbh) and ū is the local mean velocity. The energetic scales, determined from the inflection point instability at the canopy–atmosphere interface, appear to persist into the trunk space when , where C _du is the longitudinal drag coefficient, a _cr is the crown-layer leaf area density, h _c is the canopy height, and β is the dimensionless momentum absorption at the canopy top.     

The relative importance of ejections and sweeps to momentum transfer in the atmospheric boundary layer

Using an incomplete third-order cumulant expansion method (ICEM) and standard second-order closure principles, we show that the imbalance in the stress contribution of sweeps and ejections to momentum transfer (ΔS _o ) can be predicted from measured profiles of the Reynolds stress and the longitudinal velocity standard deviation for different boundary-layer regions. The ICEM approximation is independently verified using flume data, atmospheric surface layer measurements above grass and ice-sheet surfaces, and within the canopy sublayer of maturing Loblolly pine and alpine hardwood forests. The model skill for discriminating whether sweeps or ejections dominate momentum transfer (e.g. the sign of ΔS _o ) agrees well with wind-tunnel measurements in the outer and surface layers, and flume measurements within the canopy sublayer for both sparse and dense vegetation. The broader impact of this work is that the “genesis” of the imbalance in ΔS _o is primarily governed by how boundary conditions impact first and second moments.     

Organised Motion in a Tall Spruce Canopy: Temporal Scales,Structure Spacing and Terrain Effects

This study investigates the organised motion near the canopy-atmosphere interface of a moderately dense spruce forest in heterogeneous, complex terrain. Wind direction is used to assess differences in topography and surface properties. Observations were obtained at several heights above and within the canopy using sonic anemometers and fast-response gas analysers over the course of several weeks. Analysed variables include the three-dimensional wind vector, the sonic temperature, and the concentration of carbon dioxide. Wavelet analysis was used to extract the organised motion from time series and to derive its temporal scales. Spectral Fourier analysis was deployed to compute power spectra and phase spectra. Profiles of temporal scales of ramp-like coherent structures in the vertical and longitudinal wind components showed a reversed variation with height and were of similar size within the canopy. Temporal scales of scalar fields were comparable to those of the longitudinal wind component suggesting that the lateral scalar transport dominates. The existence of a – 1 power law in the longitudinal power spectra was confirmed for a few cases only, with a majority showing a clear 5/3 decay. The variation of effective scales of organised motion in the longitudinal velocity and temperature were found to vary with atmospheric stability, suggesting that both Kelvin-Helmholtz instabilities and attached eddies dominate the flow with increasing convectional forcing. The canopy mixing-layer analogy was observed to be applicable for ramp-like coherent structures in the vertical wind component for selected wind directions only. Departures from the prediction of m = Λ _w L _s ⁻¹ = 8–10 (where Λ _w is the streamwise spacing of coherent structures in the vertical wind w and L _s is a canopy shear length scale) were caused by smaller shear length scales associated with large-scale changes in the terrain as well as the vertical structure of the canopy. The occurrence of linear gravity waves was related to a rise in local topography and can therefore be referred to as mountain-type gravity waves. Temporal scales of wave motion and ramp-like coherent structures were observed to be comparable.     

Turbulence Over Urban-type Roughness: Deductions from Wind-tunnel Measurements

Turbulence data from experiments conducted over a staggered cube array, modelling a neutrally stable atmospheric boundary layer in an urban environment, are presented. The results support the contention that organised eddy structures in the near-wall region differ significantly from those in regular smooth-wall flows or in rough-wall boundary layers with much smaller h/δ ratios (where δ and h are the boundary-layer thickness and the height of the roughness elements, respectively). Attention is concentrated on spatial correlations, spectra (and thus the dominant length and time scales), maps of anisotropy invariants and quadrant analyses of the stress tensor. Results are obtained within both the roughness sublayer (i.e. the region above the roughness but within which the flow is spatially inhomogeneous) and the canopy region (i.e. below the height of the roughness elements) and discussion includes consideration of the turbulence kinetic energy balance at various heights.     

A Measurement Based Sensitivity Analysis of the Penman-Monteith Actual Evapotranspiration Model for Crops of Different Height and in Contrasting Water Status

Summary This paper presents a study of the sensibility of the Penman-Monteith evapotranspiration model to climatic (available energy and vapour pressure deficit) and parametric (aerodynamic and canopy resistances, r _a and r _c respectively) factors in a semi-arid climate, for crops in contrasting water status (well irrigated and under water stress) and of different heights. Three experiments were carried out in southern Italy on reference grass (≈ 0.1 m), grain sorghum (≈ 1 m) and sweet sorghum (≈ 3 m). For this analysis the sensitivity coefficients, taken as hourly means, were evaluated during the growth season when the crops completely covered the soil. The relative errors on evapotranspiration were also evaluated for r _a and r _c . The results showed that, for reference grass, available energy and aerodynamic resistance play a major role. For crops under water stress the most important term to evaluate is canopy resistance. For a tall crop, as sweet sorghum, the role of the vapour pressure deficit is fundamental, both when the crop is in good water status and under water stress. Received July 14, 1997 Revised February 5, 1998     

SHEBA flux–profile relationships in the stable atmospheric boundary layer

Measurements of atmospheric turbulence made during the Surface Heat Budget of the Arctic Ocean Experiment (SHEBA) are used to examine the profile stability functions of momentum, φ _m , and sensible heat, φ _h , in the stably stratified boundary layer over the Arctic pack ice. Turbulent fluxes and mean meteorological data that cover different surface conditions and a wide range of stability conditions were continuously measured and reported hourly at five levels on a 20-m main tower for 11 months. The comprehensive dataset collected during SHEBA allows studying φ _m and φ _h in detail and includes ample data for the very stable case. New parameterizations for φ _m (ζ) and φ _h (ζ) in stable conditions are proposed to describe the SHEBA data; these cover the entire range of the stability parameter ζ = z/L from neutral to very stable conditions, where L is the Obukhov length and z is the measurement height. In the limit of very strong stability, φ _m follows a ζ ^1/3 dependence, whereas φ _h initially increases with increasing ζ, reaches a maximum at ζ ≈ 10, and then tends to level off with increasing ζ. The effects of self-correlation, which occur in plots of φ _m and φ _h versus ζ, are reduced by using an independent bin-averaging method instead of conventional averaging.     

A Flume Experiment on the Adjustment of the Mean and Turbulent Statistics to a Transition from Short to Tall Sparse Canopies

Water-flume experiments are conducted to study the structure of turbulent flow within and above a sparse model canopy consisting of two rigid canopies of different heights. This difference in height specifies a two-dimensional step change from a rough to a rougher surface, as opposed to a smooth-to-rough transition. Despite the fact that the flow is in transition from a rough to a rougher surface, the thickness of the internal boundary layer scales as x ^4/5, consistent with smooth-to-rough boundary layer adjustment studies, where x is the downstream distance from the step change. However, the analogy with smooth-to-rough transitions no longer holds when the flow inside the canopy and near the canopy top is considered. Results show that the step change in surface roughness significantly increases turbulence intensities and shear stress. In particular, there is an adjustment of the mean horizontal velocity and shear stress as the flow passes over the rougher canopy, so that their vertical profiles adjust to give maximum values at the top of this canopy. We also observe that the magnitude and shape of the inflection in the mean horizontal velocity profile is significantly affected by the transition. The horizontal and vertical turbulence spectra compare well with Kolmogorov’s theory, although a small deviation at high frequencies is observed in the horizontal spectrum within the canopy. Here, for relatively low leaf area index, shear is found to be a more effective mechanism for momentum transfer through the canopy structure than vortex shedding.     

Relating Urban Surface-layer Structure to Upwind Terrain for the Salford Experiment (Salfex)

Profiles of wind and turbulence over an urban area evolve with fetch in response to surface characteristics. Sodar measurements, taken on 22 April 2002 during the Salford Experiment in the UK (Salfex), are here related to upstream terrain. A logarithmic layer up to z = 65m was observed in all half-hour averaged profiles. Above this height the profile showed a different vertical gradient, suggesting a change in surface cover upstream. The drag coefficient varied by a factor of two over only a 20° direction change. Turbulence intensity (σ _x ) for each wind component (x) decreased with height, but the ratio suggested an underestimate of σ _u compared to previous results. Mean urban and suburban cover fraction within the source area for each height decreased sharply between z = 20 and 50m, increasing slightly above. The near-convergence of cover fractions thus occured for source areas of minimum length ≈ 2,200 m. In comparison, the mean length scale of heterogeneity L _P was calculated from surface cover data to be 1,284 m, and the corresponding mean blending height h _b was 175 m. Finally, the mean streamline angle, α, was negative and the magnitude decreased with height. An exponential fit to α for z ≤ 65m gave an e-folding height scale of 159 m. A simple relationship between this height scale and L _P was assumed, giving L _P ≈ 1,080 m, which is in reasonable agreement with the estimate from surface cover type. The results suggest that more emphasis is required on modelling and measuring surface-layer flow over heterogeneous urban canopies.     

Three-dimensional simulations and wind-tunnel experiments on airflow over isolated forest stands

Prediction of windthrow risk to individual or groups of retained trees in harvested stands requires an improved understanding of canopy airflow dynamics. Large-eddy simulations were used to simulate wind-tunnel experiments in two and three dimensions to compare with observations for model validation and to address parameter space considerations for the design of subsequent retention pattern experiments. The three-dimensional simulations were similar to the observed wind-tunnel data for the statistical profiles for but there were greater differences in skewness and kurtosis. These results were obtained using a common leaf-area drag formulation without either skin friction or speed dependent drag that enables scaling with U ₀ (ambient wind speed) and h (height of the canopy). This scaling results in a single non-dimensional parameter h/h _c where h _c (x, y, z) is the momentum range resulting from the canopy drag. The validity of the model scaling was tested using two-dimensional simulations. The irrotational component of the flow (potential flow) was found to be important when defining vertical domain limitations and has significant implications for time dependent flow (i.e. turbulent conditions) when considering retention pattern design. The sudden onset of drag associated with the isolated stand presents some unexpected challenges. The horizontal scales of the shearing instabilities were simulated in two dimensions and found to range between 2h for early times to 7h for later times. The early-time horizontal scales are in the range of logical retention pattern scales and as such need to be taken into account as part of the parameter space, i.e. a range of retention pattern lengths need consideration.     

Flux–Profile Relationships Over a Fetch Limited Beech Forest

The influence of an internal boundary layer and a roughness sublayer on flux–profile relationships for momentum and sensible heat have been investigated for a closed beech forest canopy with limited fetch conditions. The influence was quantified by derivation of local scaling functions for sensible heat flux and momentum (_h and _m) and analysed as a function of atmospheric stability and fetch. For heat, the influences of the roughness sublayer and the internal boundary layer were in agreement with previous studies. For momentum, the strong vertical gradient of the flow just above the canopy top for some wind sectors led to an increase in _m, a feature that has not previously been observed. For a fetch of 500 m over the beech forest during neutral atmospheric conditions, there is no height range at the site where profiles can be expected to be logarithmic with respect to the local surface. The different influence of the roughness sublayer on _h and _m is reflected in the aerodynamic resistance for the site. The aerodynamic resistance for sensible heat is considerably smaller than the corresponding value for momentum.