WOD与Argo数据集的排重方法与软件实现

海水的温度和盐度是描述海水性质的重要物理量,其时空分布和变化几乎与海洋中所有现象都有密切的联系。因此世界各国都非常重视对海水温度和盐度的观测。自1772年第一个海水温度观测数据记录在案,截至目前全球已经积累了2 000多万站次的温盐数据。由于目前海洋调查中仪器自动观测、卫星传输数据的特点,导致同一个观测数据会被重复定位和传送接收多次,而国际上不同的数据收集计划,导致同一个数据也被不同的数据集所收集。这些被重复收集的数据,可能会造成错误的海洋特性的研究与分析结果。针对多来源重复收集的国际海洋数据问题,首先根据观测仪器精度、观测频率,研究设定了不同仪器重复数据判断参数。基于海量处理功能和人工交互式操作的需求,基于Windows平台,在Win32体系架构下,选用Visual C++6.0作为项目开发工具,图形显示部分则直接调用图形显示功能比较强大MATLAB的图形函数库完成,使用窗口嵌入技术将MATLAB图形库生成的图形完美融合到VC开发的界面中,实现了海量温盐数据的准确排重。对目前应用最为广泛的海洋数据集(World Ocean Database,WOD)数据集、Argo浮标数据集进行了数据集内和数据集间的排重,为温盐数据集的整合奠定了基础。     

联合WOA2018温盐模型及实测温盐资料重构全深度声速剖面(二):精度评估

利用西太平洋海域多个站位的XBT、XCTD及CTD实测温盐资料,对WOA2018温盐模型的可靠性进行了评估,开展了全深度声速剖面重构试验。结果表明,当水深分别为761～1 100 m、大于1 101 m和大于1 821 m时,实测资料计算的声速剖面与温盐模型推算的声速剖面互差在-2.0～2.0 m/s、-0.7～0.7 m/s和-0.7～0.45 m/s,而与实测温度和盐度模型推算的声速剖面互差总体上在-0.2～0.2 m/s。基于临界探测深度处温盐实测值对探测深度以外温盐模型施加约束和控制,以提高声速预测值精度有待进一步研究。     

夏季季风转换期间南沙群岛海域的温盐分布特征

应用2002年5月9-22日南沙群岛海域的水文观测资料,分析了季风转换期间南沙群岛海域的水文状况,并对比了调查海域不同区域的温盐分布特征。结果表明,夏季风转换期间海洋表层温度较高,基本在30℃以上,垂直结构上温度层结比较稳定。东北一西南走向界线两侧海域的温盐状况有明显的差异：西北部海域温度较高,垂向上有逆盐层现象;东南部海域温度相对较低,盐度的垂向结构上显示有双跃层现象,两海区水文特征的差异与季风结构和局地环流有密切的关系。从连续站温盐的时空剖面图可以看到,跃层以下,不规则的半日周期内潮对温盐分布有显著的影响。     

联合WOA2018温盐模型及实测温盐资料重构全深度声速剖面(一):需求论证及技术方案

海洋环境中温盐度剖面在时间和空间上复杂多变,造成海水中声波传播的速度剖面也具有同样特点。对海洋测绘领域中获取全深度声速剖面的技术难点、制约精度因素和影响结果进行了分析,设计了利用历史温盐信息并结合不同类型设备观测的温盐资料重构全深度声速剖面的技术方案,提出了对工作深度临界点处的温盐模型值应施加约束和控制,以提高声速预测值的精度。     

联合WOA2018温盐模型及实测温盐资料重构全深度声速剖面(四):声速剖面应用

在深远海海域开展多波束水深测量时,受海上苛刻作业条件等多种影响,获取全深度声速剖面往往比较困难。首先联合WOA2018温盐模型和多个站位CTD、XCTD实测温盐剖面资料开展了全深度声速剖面重构,进而使用三组来源不同的全深度声速剖面开展了多波束测深声速改正对比分析。从试验结果看,这几组声速剖面对多波束测深精度的影响基本一致。特别是当假定CTD站位采用XCTD设备并由此推算深度大于1099m的温盐及声速剖面时,多波束测深的声速改正结果也能满足海底地形成果的质量要求。     

南海海洋环流的诊断计算

利用GDEM温盐资料,采用P矢量方法计算了与温盐资料时间序列相对应的不同季节、不同层深的南海海洋环流及流涡系统,并且得出了相关的结论。     

风廓线雷达在重污染天气与逆温层关系研究中的应用

本文利用气象要素地面观测和环境空气质量监测数据,结合对流层风廓线雷达探测资料,深入研究了2013—2019年发生在青岛地区的65个重污染天气的逆温层变化特征及其与重污染天气的关系。结果表明:(1)青岛地区的重污染天气主要发生在12月至次年1月,重污染发生当日的空气质量指数(Air quality iudex AQI)有“双峰”结构的日变化特征;(2)逆温层早于重污染天气出现,当逆温层高度降低且强度增强,或逆温层高度维持较低、强度维持较强而厚度增厚时,重污染持续或加强;当逆温层高度升高、强度减弱或厚度变薄时,重污染减弱或消散;(3)根据热成风原理,利用风廓线雷达资料可以提前3~7 h预测当地重污染天气的发生,从根本上弥补了常规探空资料低时间分辨率的不足。本文首次将风廓线雷达资料用于分析逆温层变化,而不是平流输送作用,这不仅增加了一个判断影响AQI变化气象条件的新手段,也为今后进一步研究逆温层与重污染天气之间的关系增加了一个有效的新途径,对精准预判某地重污染天气发生的具体时间节点有重要的参考意义和业务应用价值。     

廉州湾南部海域泥沙来源及运移趋势分析

重矿物组合、含量变化和特征矿物的分布及变化规律是沿海泥沙来源和运移趋势判断的重要手段之一。通过对廉州湾南部海域海底表层沉积物的重矿物分析 ,发现该区重矿物分布以北海地角为界 ,其百分含量和特征矿物南北有别 ,可能分别代表不同的物质来源区。其中廉州湾北部南流江流域来沙是该区主要物源 ,运移趋势为自 NE向 SW;地角西南岸段、岭南侧海岸侵蚀及银滩来沙也为该区提供了部分物源 ,运移趋势为绕过冠头岭沿海岸向 N方向运移。由于缺乏北海陆域陆相地层重矿物含量等相关资料 ,暂未做物质来源区的具体判断     

晋江海域海水淡化工程浓盐水排海方案研究

为科学选择海水淡化浓盐水排海方案,运用MIKE3数值模拟软件,选取福建晋江附近海域,建立了海水淡化浓盐水排海三维数值模型,模型水位振幅误差在10 cm以内,流速、流向计算结果与实测值变化规律一致,精度符合要求。考虑多端口、排放口间距、喷射速度等因素对浓盐水稀释的影响,选取了4种不同的浓盐水排放方案,开展了海水淡化浓盐水排放扩散模拟,计算了不同排海方案下盐升包络面积。结果表明,晋江海域浓盐水排放量为3.5万t/d的海水淡化工程采用扩散器后盐升分布面积显著减少,采用多个排放口且每个排放口多个端口喷射的排放方案,可明显增强浓盐水在受纳海域中的扩散稀释效果,盐升3的分布面积可减少近一半。建议加强我国海水淡化工程浓盐水排海扩散器的研究与应用,保护受纳海域海洋生态环境。     

二重孔隙介质地下水溶质运移模型应用研究

为比较准确地模拟二重孔隙介质地下水溶质运移 ,本文依据二重孔隙介质法 ,分别对孔隙岩块和裂隙介质建立相应的溶质运移模型 ,将孔隙岩块视为作用于裂隙介质的源或汇 ,对反映岩块和裂隙介质之间物质交换的耦合项进行了数学推导。应用本文方法在济南地区建立起二重孔隙介质溶质运移模型。研究结果表明 ,此方法更实际地反映出裂隙对溶质较强的传导能力和孔隙岩块对溶质较强的贮存能力     

基于表层温盐传感器的标定分析

感应式温盐传感器基于电导率法测盐,可以实现现场测量与实时测量。测量盐度时需要首先计算海水温度、海水电导率和海水压力,表层感应式温盐传感器对压力量不予考虑,温度、电导率的精度却直接关系到盐度测量结果的准确度,因此使用传感器前必须进行温度和盐度的标定。分析了温盐传感器的工作原理,设计温度、电导率的标定校准步骤,包括回归曲线的选择和回归方程系数的计算,其中温度、电导率和温度补偿的标定回归曲线采用多项式形式,用实验室高精度盐度计和铂电阻温度仪测得5~7组数据,然后对多项式最小二乘法回归,电导率回归过程中由温度和盐度求电导率用到了二分法,最后论述了标定回归方程的误差范围。     

Stability of Temperature and Conductivity Sensors of Argo Profiling Floats

After recalibration of the temperature and conductivity sensors of three Argo profiling floats recovered after operations for four to nine months, the results indicate that the floats basically showed no significant drift, either in temperature or salinity, and adequately fulfilled the accuracy requirement of the Argo project (0.005°C for temperature and 0.01 psu for salinity). Only the third float showed a significant offset in salinity of about −0.02 psu, as expected from comparison between the float data and the shipboard conductivity-temperature-depth data. This offset was caused by the operational error of the PROVOR-type float, in which the surface water was pumped immediately after the launch, fouling the conductivity sensor cell. This revised version was published online in July 2006 with corrections to the Cover Date.     

Down-scaled regional ocean modeling system (ROMS) for high-resolution coastal hydrodynamics in Korea

A down-scaled operational oceanographic system is developed for the coastal waters of Korea using a regional ocean modeling system(ROMS).The operational oceanographic modeling system consists of atmospheric and hydrodynamic models.The hydrodynamic model,ROMS,is coupled with wave,sediment transport,and water quality modules.The system forecasts the predicted results twice a day on a 72 h basis,including sea surface elevation,currents,temperature,salinity,storm surge height,and wave information for the coastal waters of Korea.The predicted results are exported to the web-GIS-based coastal information system for real-time dissemination to the public and validation with real-time monitoring data using visualization technologies.The ROMS is two-way coupled with a simulating waves nearshore model,SWAN,for the hydrodynamics and waves,nested with the meteorological model,WRF,for the atmospheric surface forcing,and externally nested with the eutrophication model,CE-QUAL-ICM,for the water quality.The operational model,ROMS,was calibrated with the tidal surface observed with a tide-gage and verified with current data observed by bottom-mounted ADCP or AWAC near the coastal waters of Korea.To validate the predicted results,we used real-time monitoring data derived from remote buoy system,HF-radar,and geostationary ocean color imager(GOCI).This down-scaled operational coastal forecasting system will be used as a part of the Korea operational oceanographic system(KOOS) with other operational oceanographic systems.     

Reconstruction of the three-dimensional salinity and temperature fields of the Black Sea on the basis of satellite altimetry measurements

The methodology of joint processing of the satellite altimetry and occasional hydrological observations in the Black Sea for 1993–2012 is developed. The original technique for reconstruction of the 3D temperature and salinity fields in the deep-sea part is proposed and implemented. This technique makes it possible to identify the depths at which a contribution of adiabatic processes to the deformation of the temperature and salinity profiles of the sea is predominant. Daily-averaged 3D fields of the seawater temperature and salinity in a baroclinic layer on a regular grid are reconstructed. The evaluation of accuracy of the reconstructed temperature and salinity arrays is performed by comparing them with the data of hydrological exploration. Structures of the temperature and salinity fields are correlated naturally with topography of the altimetric level and clearly indicate the synoptic variability. Seasonal and interannual variabilities of the kinetic energy (averaged over horizons of the 63–400 m layer) of the geostrophic currents calculated using the dynamic method makes it possible to reveal a sharp increase in the kinetic energy of the currents in the winter season of 2002. A high correlation is found between the interannual variability of the ERA-Interim wind stress curl averaged over the surface of the deep sea part and the kinetic energy of the geostrophic currents in the 63–400 m layer.     

叶绿素传感器海上应用影响因素研究进展

叶绿素浓度是衡量海洋浮游植物丰度的重要指标,快速准确地测定海水中的叶绿素含量,对于业务化监测和科学研究都具有重要的现实意义。基于活体荧光法的叶绿素传感器操作简便,可长期原位在线监测,能轻易获取大量实测数据,是当前海水叶绿素高精度测量手段的主要发展趋势。由于在海上应用时受到多种环境因素的影响,叶绿素传感器数据与实验室萃取法数值之间存在较大偏差。作者综述了科学界在浊度、光照、温度、盐度等海洋环境因素及藻类生理因素对叶绿素传感器测量的影响规律、影响机理和数据校正方法的研究进展,并对活体荧光法叶绿素传感器海上应用数据质量控制方法的研究思路进行了展望。     

Experimentally determined Mg/Ca and Sr/Ca ratios in juvenile bivalve calcite for Mytilus edulis: implications for paleotemperature reconstructions

To further evaluate the potential use of Mg/Ca and Sr/Ca ratios as a paleothermometer in the shell carbonate of the blue mussel Mytilus edulis, we grew juvenile mussels (～15 mm shell height; <2 years old) collected from Maine, USA, in controlled environments for 4 months. The four-by-three factorial design consisted of four circulating temperature baths (7, 11, 15 and 19°C), and three salinity ranges (23, 28, and 32). During the experiment, water Mg/Ca and Sr/Ca molar ratios were monitored weekly, and showed little variation across all salinity and temperature ranges. Data from sampled shells including all salinity treatments yielded relatively poor relationships between shell elemental chemistry and water temperatures. However, if only the low salinity treatment data (23) are used, the relationships between shell elemental chemistry and water temperature improve moderately. Based on the data presented here, it may be possible to use Mg/Ca and Sr/Ca ratios from the shell carbonate of juvenile M. edulis to reconstruct paleotemperatures in estuarine settings (salinity below 24) with a corresponding RMSE (root mean squared error; 95% confidence interval) of ±2.4°C and ±2.8°C, respectively. In order for this methodology to be statistically meaningful, water temperature changes must be rather large, as the errors associated with using Mg/Ca and Sr/Ca ratios from the shell material of M. edulis are substantial. Further work is required to determine if the findings presented here can be duplicated, and if the potential salinity effect is pervasive.     

南海北部海洋四维变分同化试验研究

为了研究四维变分同化方法在南海北部海洋数值预报中的适用性,使用海洋区域模式(ROMS),建立了南海北部海洋资料四维变分同化系统,进行了温盐廓线和海面温度数据同化试验,初步对比分析了三种四维变分实现方法的同化效果。研究结果表明,四维变分同化方法具有较好的同化效果,其中,增量强约束方法(I4DVar)具有较好的稳定性,其稳定性高于4DPSAS和R4DVar。本文研究成果为建立南海业务化海洋四维变分同化及预报系统奠定技术基础。     

A regression method for estimating salinity in the Ocean

Specification of salinity is an important problem in initialization of the global ocean circulation models. Unlike the temperature, the salinity data in the World Ocean are irregular and nonuniform; thus, methods for estimating the salinity using pleutiful temperature data are urgently needed. A new regression method for estimating the salinity in the ocean is suggested in this paper. Unlike similar currently known approaches, the method suggested applies a set of polynomials and their powers invariant for the entire ocean, while the latter is divided into a number of study subregions for the estimates. The best-fit regression curves and the minimal errors of the salinity estimates are found for each of the regions. The method uses the World Oceanographic Database (WOD-2001 NODC NOAA) to determine the regression coefficients and the confidence intervals (RCCI). A special RCCI database was organized on the basis of these data. The RCCI database makes possible determination of the salinity at any point in the ocean if the temperature data are provided (measurements, XBT profiles, etc.). A realization of the method suggested is demonstrated by the example of the Atlantic Ocean.     

“海翼号”水下滑翔机盐度数据的热滞后效应偏差订正方法探讨

水下滑翔机可以高效地观测海水的温度、盐度和压强等海洋参数,但由于热滞后效应,盐度数据,特别是在温度梯度较大的温跃层,会出现一定程度的偏差。本研究选取了3种目前常用的盐度热滞后订正方法,对带泵的“海翼号”水下滑翔机,于2019年8月在中北太平洋所观测的盐度数据因热滞后效应引起的偏差进行订正处理,与船载911型温盐深测量仪(Instrument for Measuring Conductivity Temperature and Depth,CTD)观测盐度进行对比,在比较了3种方法对滑翔机盐度订正前后下降和上升剖面偏差的减少程度、订正后剖面与船载CTD观测剖面的偏差大小和下降上升温盐曲线(T-S曲线)的一致程度后,得出了水下滑翔机盐度订正的最优方法,即在订正电导池中实际温度的前提下,采用计算机图形分割方法,最小化滑翔机机载CTD测得的下降和上升两个剖面T-S曲线围成面积所确定的目标函数,来确定合适的热滞后修正振幅和时间常数,从而修正下降和上升两个剖面之间盐度偏差。