The Karoo igneous province — A problem area for inferring tectonic setting from basalt geochemistry

Tholeiitic basalts and associated intrusives are the major component of the Karoo igneous province. They are of Mesozoic age and constitute one of the world's classic continental flood basalt (CFB) provinces. It has been argued that most Karoo basalts have not undergone significant contamination with continental crust and that their lithospheric mantle source areas were enriched in incompatible minor and trace elements during the Proterozoic. The only exceptions to this are late-stage MORB-like dolerites near the present-day continental margins which are considered to be of asthenospheric origin.When data for the “southern” Karoo basalts are plotted on many of the geochemical discriminant diagrams which have been used to infer tectonic setting, essentially all of them would be classified as calc-alkali basalts (CAB's) or low-K tholeiites. Virtually none of them plot in the compositional fields designated as characteristic of “within-plate” basalts. There is little likelihood that the compositions of the Karoo basalts can be controlled by active subduction at the time of their eruption and no convincing evidence that a “subduction component” has been added to the subcontinental lithospheric mantle under the entire area in which the basalts crop out. It must be concluded that the mantle source areas for CAB's and the southern Karoo basalts have marked similarities.In contrast, the data for “northern” Karoo basalts largely plot in the “within-plate” field on geochemical discriminant diagrams. Available data suggest that the source composition and/or the restite mineralogy and degree of partial melting are different for southern and northern Karoo basalts. There is no evidence for any difference in tectonic setting between the southern and northern Karoo basalts at the time they were erupted. This appears to be clear evidence that specific mantle source characteristics and/or magmatic processes can vary within a single CFB province to an extent that renders at least some geochemical discriminant diagrams most unreliable for classifying tectonic environment with respect to continental volcanic rocks.     

U-Pb isotopic geochemistry of the post-collisional mafic-ultramafic rocks from the Dabie Mountains

The U-Pb isotope geochemical study of the pyroxenite-gabbro intrusion in the Dabie Mountains shows that the post-collisional mafic-ultramafic rocks of the Dabie Mountains are characterized by relative high Pb contents, low U contents and low U/Pb ratios. These characters may be results of interaction between lithosphere or depleted asthenospheric mantle (DMM) and lower crust, but have nothing to do with mantle plume and subducted continental crust. It was first observed that some samples with lower ²⁰⁶Pb/²⁰⁴Pb and higher ²⁰⁷Pb/²⁰⁴Pb ratios show typical characters of the LOMU component. The Pb, Sr, and Nd isotopic tracing shows that three components are needed in the source of the Zhujiapu pyroxenite-gabbro intrusion. They could be old enriched sub-continental lithospheric mantle (LOMU component), lower crust and depleted asthenospheric mantle. The crust-mantle interaction process producing primitive magma of post-collisional mafic-ultramafic rocks in the Dabie Mountains could be described by a lithospheric delamination and magma underplating model. After continent-continent collision, delamination of the thickened lithosphere induced the upwelling of depleted asthenospheric mantle, which caused partial melting of asthenospheric mantle and residual sub-continental lithospheric mantle. The basaltic magma produced in this process underplated in the boundary between the crust and mantle and interacted with lower crust resulting in the geochemical characters of both enriched lithospheric mantle and lower crust.     

U-Pb isotopic geochemistry of the post-collisional mafic-ultramafic rocks from the Dabie Mountains——Crust-mantle interaction and LOMU component

Geochronological studies of mafic-ultramafic intrusions occurrence in the northern Dabie zone (NDZ) suggest that these pyroxenite-gabbro intrusions formed 120—130 Ma ago should be post-collisional magmatic rocks[1—4]. These mafic-ultramafic rocks provid…     

Plume-lithosphere interactions in the ocean basins: constraints from the source mineralogy

Trace element relationships of near-primary alkalic lavas from La Grille volcano, Grande Comore, in the Indian Ocean, as well as those of the Honolulu volcanic series, Oahu, Hawaii, show that their sources contain amphibole and/or phlogopite. Small amounts of each mineral (2% amphibole in the source of La Grille and 0.5% phlogopite plus some amphibole in the source of the Honolulu volcanics) and a range of absolute degrees of partial melting from 1 to 5% for both series are consistent with the observed trace element variation. Amphibole and phlogopite are not stable at the temperatures of convecting upper mantle or upwelling thermal plumes from the deep mantle; however, they are stable at pressure-temperature conditions of the oceanic lithospheric mantle. Therefore, the presence of amphibole and/or phlogopite in the magma source region of volcanics is strong evidence for lithospheric melting, and we conclude that the La Grille and the Honolulu series formed by melting of the oceanic lithospheric mantle.

The identification of amphibole ± phlogopite in the source region of both series implies that the metasomatism by fluids or volatile-rich melts occurred prior to melting. The presence of hydrous phases results in a lower solidus temperature of the lithospheric mantle, which can be reached by conductive heating by the thermal plumes. Isotope ratios of the La Grille and the Honolulu series display a restricted range in composition and represent compositional end-members for each island. Larger isotopic variations in shield lavas, represented by the contemporaneous Karthala volcano on Grande Comore and the older Koolau series on Oahu, reflect interaction of the upwelling thermal plumes with the lithospheric mantle rather than the heterogeneity of deep-seated mantle plume sources or entrainment of mantle material in the rising plume. Literature OsSr isotope ratio covariations constrain the process of plume-lithosphere interaction as occurring through mixing of plume melts and low-degree melts from the metasomatized oceanic lithospheric mantle.

The characterization of the lithospheric mantle signature allows the isotopic composition of the deep mantle plume components to be identified, and mixing relationships show that the Karthala and Koolau plume end-members have nearly uniform isotopic compositions. Based on independent arguments, isotopic variations on Heard and Easter islands have been shown to be a result of mixing between deep plume sources having distinct isotopic compositions with lithosphere or shallow asthenospheric mantle. To the extent that these case studies are representative of oceanic island volcanism, they indicate that interaction with oceanic lithospheric mantle plays an important role in the compositions of lavas erupted during the shield-building stage of plume magmatism, and that isotopic compositions of deep mantle plume sources are nearly uniform on the scale that they are sampled by melting.     

Intracratonic asthenosphere upwelling and lithosphere rejuvenation beneath the Hoggar swell (Algeria): Evidence from HIMU metasomatised lherzolite mantle xenoliths

The mantle xenoliths included in Quaternary alkaline volcanics from the Manzaz-district (Central Hoggar) are proto-granular, anhydrous spinel lherzolites. Major and trace element analyses on bulk rocks and constituent mineral phases show that the primary compositions are widely overprinted by metasomatic processes. Trace element modelling of the metasomatised clinopyroxenes allows the inference that the metasomatic agents that enriched the lithospheric mantle were highly alkaline carbonate-rich melts such as nephelinites/melilitites (or as extreme silico-carbonatites). These metasomatic agents were characterized by a clear HIMU Sr–Nd–Pb isotopic signature, whereas there is no evidence of EM1 components recorded by the Hoggar Oligocene tholeiitic basalts. This can be interpreted as being due to replacement of the older cratonic lithospheric mantle, from which tholeiites generated, by asthenospheric upwelling dominated by the presence of an HIMU signature. Accordingly, this rejuvenated lithosphere (accreted asthenosphere without any EM influence), may represent an appropriate mantle section from which deep alkaline basic melts could have been generated and shallower mantle xenoliths sampled, respectively. The available data on lherzolite xenoliths and alkaline lavas (including He isotopes, Ra < 9) indicate that there is no requirement for a deep plume anchored in the lower mantle, and that sources in the upper mantle may satisfactorily account for all the geochemical/petrological/geophysical evidence that characterizes the Hoggar swell. Therefore the Hoggar volcanism, as well as other volcanic occurrences in the Saharan belt, are likely to be related to passive asthenospheric mantle uprising and decompression melting linked to tensional stresses in the lithosphere during Cenozoic reactivation and rifting of the Pan–African basement. This can be considered a far-field foreland reaction of the Africa–Europe collisional system since the Eocene.     

碳酸岩是大陆岩石圈构造背景和地幔交代作用的指示岩石

根据已知碳酸岩的地质产状、岩石学特征、Nd-Sr-Pb同位素及痕量元素地球化学特征,结合高温高压实验岩石学资料,论述了其地幔源区的物质成分、交代过程、软流圈地幔部分熔融机制和碳酸岩岩浆的演化模型碳酸岩既可以产生于裂谷环境,由起源于软流圈地幔的霞石质超基性-基性岩浆经液态不混溶作用而形成,与硅酸不饱和过碱性杂岩构成环状碳酸岩-碱性杂岩;也能够产生于碰撞造山过程中派生的引张岩石圈断裂带,直接导源于岩石圈地幔的低程度部分熔融作用,形成单一的透镜状、条带状和似层状碳酸岩体     

Bundelkhand mafic dykes, Central Indian Shield: Implications for the role of sediment subduction in Proterozoic crustal evolution

Abstract The Archean to Paleo–Proterozoic Bundelkhand massif basement of the central Indian shield has been dissected by numerous mafic dykes of Proterozoic age. These dykes are low‐Ti tholeiites, ranging in composition from subalkaline basalt through basaltic‐andesite to dacite. They are enriched in light rare earth elements (LREE), large ion lithophile elements (LILE) and depleted in high field strength elements (HFSE: Nb, P and Ti). Negative Sr anomaly is conspicuous. Nb/La ratios of the dykes are much lower compared with the primitive mantle, not much different from the average crustal values, but quite similar to those of continental and subduction related basaltic rocks. Bulk contamination of the mantle derived magma by crustal material is inadequate to explain the observed geochemical characteristics; instead contamination of the mantle/lithospheric source(s) via subduction of sediment is a better proposition. Thus, in addition to generating juvenile crust along the former island arcs, subduction processes appear to have influence on the development of enriched mantle/lithospheric source(s). The Bundelkhand massif basement is inferred to represent subduction related juvenile crust, that experienced lithospheric extension and rifting possibly in response to mantle plume activities. The latter probably supplied the required heat, material (fluids) and extensional environment to trigger melting in the refractory lithospheric source(s) and emplacement of the mafic dykes. Proterozoic mafic magmatic rocks from Bundelkhand, Aravalli, Singhbhum and Bastar regions of the Indian shield and those from the Garhwal region of the Lesser Himalaya display remarkably similar enriched incompatible trace elements characteristics, although limited chemical variations are observed in all these rocks. This may indicate the existence of a large magmatic province, different parts of which might have experienced similar petrogenetic processes and were probably derived from mantle/lithospheric source(s) with similar trace element characteristics. The minor, less enriched to depleted components of the Jharol Group of the Aravalli terrane and those from the Singhbhum terrane may represent protracted phases of rifting, that probably caused thinning and mobilization of the lithosphere, facilitating the eruption/emplacement of the asthenospheric melts (with N‐ to T‐types mid‐oceanic ridge basalts signatures) and deposition of deep water facies sediments in the younger developing oceanic basins. In contrast, Bundelkhand region did not experience such protracted rifting, although dyke swarms were emplaced and shallow water Bijawar Group and Vindhyan Supergroup sediments were deposited in continental rift basins. All these discrete Proterozoic terranes appear to have experienced similar petrogenetic processes, tectonomagmatic and possibly temporal evolution involving subduction processes, influencing the lithospheric source characteristics, followed by probably mantle plume induced ensialic rifting through to the development of oceanic basins in the Indian shield regions and their extension in the Lesser Himalaya.     

Softening of the subcontinental lithospheric mantle by asthenosphere melts and the continental extension/oceanic spreading transition

The majority of ophiolitic peridotites in the Alpine–Apennine system show evidence of extensive interaction between subcontinental lithospheric mantle and fractional melts of asthenospheric origin. This interaction led to petrological, structural, and geochemical changes in the lithospheric mantle, and was accompanied by a temperature increase to near-asthenospheric values, resulting in the thermomechanical erosion of the lithosphere. We term the parts of mantle lithosphere thus affected the asthenospherized lithospheric mantle or ALM.The thermal and rheological consequences of thermomechanical erosion are explored by modelling the temperature and rheological properties of the thinned lithosphere as a function of thickness of ALM and time since asthenospherization (i.e., since the beginning of thermal relaxation). Results are given both in terms of rheological profiles (strength envelopes) and total lithospheric strength (TLS) for different lower crustal rheologies. The TLS decreases as a consequence of thermomechanical erosion. This decrease is a non-linear function of the thickness of the ALM. While practically negligible if less than 50% of lithospheric mantle is affected, it becomes significant (up to almost one order of magnitude) if thermomechanical erosion approaches the Moho. The maximum decrease in TLS is achieved within a short time span (1–2 Ma) after the end of the heating episode.As a working hypothesis, we propose that thermomechanical erosion of the lithospheric mantle, related to lithosphere/asthenospheric melts interaction, can be an important factor in a geologically rapid decrease in TLS. This softening could lead to whole lithospheric failure and consequently to a transition from continental extension to oceanic spreading.     

Anomalous subsidence on the rifted volcanic margin of Pakistan: No influence from Deccan plume

The role of hotter than ambient plume mantle in the formation of a rifted volcanic margin in the northern Arabian Sea is investigated using subsidence analysis of a drill site located on the seismically defined Somnath volcanic ridge. The ridge has experienced > 4 km of subsidence since 65 Ma and lies within oceanic lithosphere. We estimate crustal thickness to be 9.5–11.5 km. Curiously < 400 m of the thermal subsidence occurred prior to 37 Ma, when subsidence rates would normally be at a maximum. We reject the hypothesis that this was caused by increasing plume dynamic support after continental break-up because the size of the thermal anomalies required are unrealistic (> 600 °C), especially considering the rapid northward drift of India relative to the Deccan-Réunion hotspot. We suggest that this reflects very slow lithospheric growth, possibly caused by vigorous asthenospheric convection lasting > 28 m.y., and induced by the steep continent–ocean boundary. Post-rift slow subsidence is also recognized on volcanic margins in the NE Atlantic and SE Newfoundland and cannot be used as a unique indicator of plume mantle involvement in continental break-up.     

Major- and trace-element systematics and isotope geochemistry of Cenozoic mafic volcanic rocks from the Vogelsberg (central Germany): Constraints on the origin of continental alkaline and tholeiitic basalts and their mantle sources

The Cenozoic basaltic province of the Vogelsberg area (central Germany) is mainly composed of intercalated olivine to quartz tholeiites and near-primary nephelinites to basanites. The inferred mantle source for the alkaline and tholeiitic rocks is asthenospheric metasomatized garnet peridotite containing some amphibole as the main hydrous phase. Trace element modelling indicates 2 to 3% partial melting for the alkaline rocks and 5 to 7% partial melting for the olivine tholeiites. Incompatible trace element abundances and ratios as well as Nd and Sr radiogenic isotope compositions lie between plume compositions and enriched mantle compositions and are similar to those measured in Ocean Island Basalts (OIB) and the Central European Volcanic Province elsewhere. The mafic olivine tholeiites have similar Ba/Nb, Ba/La and Nd–Sr isotope ratios to the alkaline rocks indicating derivation of both magma types from chemically comparable mantle sources. However, Zr/Nb ratios are slightly higher in olivine tholeiites than in basanites reflecting some fractionation of Zr relative to Nb during partial melting. Quartz tholeiites have higher Ba/Nb, Zr/Nb, La/Nb, but lower Ce/Pb ratios and lower Nd isotope compositions than the alkaline rocks which can be explained by interaction of the basaltic melt with lower (granulite facies) crustal material or partial melts thereof during stagnation within the lower crust. It appears most likely that upwelling of hot, asthenospheric material results in the generation of primitive alkaline rocks at the base of the lithosphere at depths of 75–90 km. Lithospheric extension together with minor plume activity and probably lower lithosphere erosion induced melting of shallower heterogenous upper mantle generating a spectrum of olivine tholeiitic melts. These olivine tholeiitic rocks evolved via crystal fractionation and probably limited contamination to quartz tholeiites.     

The mantle origins of Karoo picrites

Karoo picrites are divided into a volumetrically dominant high Ti-Zr (HTZ) group and a less abundant low Ti-Zr (LTZ) group. Distinguished in this way, it is then possible to use the comparison of major element compositions with those of experimentally determined partial melts of mantle peridotites to constrain the depth of segregation for each magma type. This approach also identifies the nature of source and residual mantle materials from which such magma segregation may have occurred. The LTZ group show uniformly shallow pressures (ca. 13–15 kb) of magma segregation and the HTZ group show a range of pressures (10 kb to > 30 kb) of segregation. In the HTZ group a range of K₂O, TiO₂ and Zr contents is observed, with greater concentrations in picrites which have segregated at higher pressures (high-NaK# HTZ picrites) relative to a low-NaK# HTZ picrite group (NaK#=[Na/₂O+K₂O][Na₂O+K₂O+CaO]). If we measure the refractory character of a mantle source peridotite by its CaO and Al₂O₃ content then it is shown that the LTZ picrites have segregated from sources which are more refractory than MORB or OIB sources and which lack the strong K, Ti and Zr enrichments of HTZ sources. Mixing of at least two mantle components is required to fully explain the major element and isotopic data in the HTZ group and is combined with variations in composition produced by different depths of magma segregation. Consideration of the major element phase relations coupled with trace element abundances and isotope data leads us to suggest that one component is the Kaapvaal lithospheric mantle (incompatible element enriched but relatively refractory with respect to basaltic components) and the other is asthenospheric mantle. This lithospheric mantle component is most evident in the high-NaK# HTZ picrite end-member which has segregated at a greater depth (ca. 18–32 kb). The asthenospheric component is most closely represented by the low-NaK# HTZ picrites which have segregated at pressures of 10–22 kb. The LTZ source, more refractory mantle than MORB, is inferred to be the shallow sub-continental lithospheric mantle which may also be the source of the low-MgO tholeiites related to these picrites, and therefore the source for the main phase of Karoo basaltic eruptions.     

A review of mantle xenoliths and their role in diamond exploration

An historical introduction to the geotherm and its significance for the existence of a diamond window at the base of the peridotite lithosphere is followed by a brief survey of types of mantle zenoliths (low T, high T and metasomatized peridotites, megacrysts or discrete nodules, eclogites and less common varieties). The similarities of eclogite xenoliths to the subducted eclogites with graphitized diamonds in the peridotite massif of Beni Bousera, northern Morocco, are reviewed. Diamond-bearing peridotite (Archaean harzburgite and lherzolite) and eclogite xenoliths are rare, having suffered excessive disaggregation. They do not necessarily relate proportionately to the types of diamonds in the host kimberlite/lamproite.Batches of single mineral species from disaggregated diamondiferous xenoliths, particularly garnets, form a realistic approach to diamond exploration. Nickel thermometry applied to Cr pyropes, developed by Griffin et al. (1989) Contr. Miner. Petrol. 103, 199–203, and barometry dependent upon Cr content in notional coexisting spinels, provide a realistic appreciation of the extent of the diamond window. Sodium and K pressure “indicators” in eclogitic garnets and clinopyroxenes are reviewed, but estimates are affected by mantle processes (metasomatism) and amounts of coexisting P and Ti.Metasomatic processes in the basal lithosphere are sourced in the underlying asthenospheric (megacryst) magmas. Depending on the degree and type of interaction they can result in the destruction of ancient diamonds or the growth of new peridotitic diamonds. Partial destruction or replacement of mineral indicators may also result and Cr garnets acquire distinctive quantifiable trace element signatures. High T minerals encapsulated in diamond are either relict from former ambient high T conditions or the result of localized thermal highs emanating from asthenospheric magmas (or plume/diapir).It is concluded that the fullest significance of the geochemistry (sensuo lato) of the diamondiferous debris erupted by kimberlites and lamproites, can only be made by reference to complementary geophysical, structural and isotopic studies of the surrounding cratonic country rocks. Thus, tectonothermal events which punctuate the varied evolutionary histories of cratons—plume migration, rifting, subduction/overthrusting, delamination, cratonization, flood basalt generation, regional metamorphism and metasomatism, etc.—can be manifested in the deep lithosphere environment, and cannot be divorced from questions of diamond formation and survival.     

Dynamical geochemistry of the Hawaiian plume

This paper presents a simple dynamical model for melting and trace element distribution in the Hawaiian mantle plume. I model the plume as a partially molten stagnation point flow against the oceanic lithosphere, and obtain solutions for the temperature, melt migration rate, and trace element concentration within it. Trace element concentrations in the melt exceed simple batch melting predictions by up to 70%. The magnitude of this effect depends strongly on the solid-melt partition coefficientK. Trace elements with differentK therefore experience a “dynamical fractionation” within the plume, and incompatible trace element ratios such asLa/Ce always exceed the batch melting predictions. I suggest a simple model for plume-lithosphere interaction in which melts from these two sources mix in proportions determined by thermodynamic constraints. The model can explain the composition of basalts from Haleakala if the degree of melting of the lithosphereF₁ decreases with time from roughly 10% for tholeiites to 2% for alkalic basalts. These values are considerably higher than previous estimates ofF₁ < 1%, and imply correspondingly smaller and more realistic values ( 10 km) for the thickness of the melted part of the lithosphere. Partial melting of additional depleted sources such as the asthenosphere is therefore not required by the Haleakala data. Estimates ofF₁ are highly sensitive to the values chosen for the partition coefficients, however, and should therefore be interpreted with caution.     

Mantle heterogeneity beneath the southern Mid-Atlantic Ridge: trace element evidence for contamination of ambient asthenospheric mantle

We report new trace element data for an extensive suite of quench basalt glasses dredged from the southern Mid-Atlantic Ridge (MAR) between 40°S and 52.5°S. Ratios between highly incompatible trace elements are strongly correlated and indicate a systematic distribution of incompatible element enriched mid-ocean ridge basalt (MORB) (E-type: Zr/Nb=5.9-19, Y/Nb=0.9-8.4, (La/Sm)_n=1.0-2.9) and incompatible element depleted MORB (N-type: Zr/Nb=30-69, Y/Nb=11-29, (La/Sm)_n=0.48-0.79) along this section of the southern MAR. A notable feature of N-type MORB from the region is the higher than usual Ba/Nb (4-9), La/Nb (1.2-2.4) and primitive mantle normalised K/Nb ratios (>1). Ba/Nb ratios in E-type MORB samples from 47.5 to 49°S are especially elevated (>10). The occurrence and geographic distribution of E-type MORB along this section of the southern MAR can be correlated with the ridge-centred Shona and off-axis Discovery mantle plumes. In conjunction with published isotope data for a subset of the same sample suite [Douglass et al., J. Geophys. Res. 104 (1999) 2941], a model is developed whereby prior to the breakup of Gondwana and the opening of the South Atlantic Ocean, the underlying asthenospheric mantle was locally contaminated by fluids/melts rising from the major Mesozoic subduction zone along the south-southwest boundary of Gondwana, leaving a subduction zone geochemical imprint (elevated (K/Nb)_n and ⁸⁷Sr/⁸⁶Sr ratios, decreased ¹⁴³Nd/¹⁴⁴Nd ratios). Subsequent impingement of three major mantle plume heads (Tristan/Gough, Discovery, Shona) resulted in heating and thermal erosion of the lowermost subcontinental lithosphere and dispersal into the convecting asthenospheric mantle. With the opening of the ocean basin, continued plume upwelling led to plume-ridge interactions and mixing between geochemically enriched mantle derived from the Shona and Discovery mantle plumes, material derived from delamination of the subcontinental lithosphere, and mildly subduction zone contaminated depleted asthenospheric mantle.     

Development of Archaean lithosphere deduced from chronology and isotope chemistry of Scourie Dykes

The chronology and isotope geochemistry of a selection of Proterozoic Scourie dykes has been investigated in order to specify both their time of emplacement within the thermal history of the Archaean crust of N.W. Scotland, and to attempt to characterise the evolution of continental lithosphere. SmNd, RbSr and UPb isotope analyses are presented. Primary, major igneous minerals separated from four well preserved dykes yield SmNd ages of 2.031 ± 0.062Ga, 2.015 ± 0.042Ga, 1.982 ± 0.044Ga and 2.101 ± 0.078Ga, which are interpreted as crystallisation ages.The initial Nd isotope compositions in the dykes at their emplacement age of 2.0 Ga, range from +3.4 to −6.8, indicating the presence of an older lithospheric component. SmNd whole-rock isotope data for fifteen dykes, if interpreted to have age significance, yield an “age” of 3.05 ± 0.27 Ga. SmNd crustal residence ages for the same dykes average 2.95 Ga, which is interpreted as the time that small melts were added to the Lewisian lithosphere. The possibility that correlated¹⁴⁷Sm/¹⁴⁴Nd and¹⁴³Nd/¹⁴⁴Nd ratios are an artifact of mixing between depleted mantle melts generated at 2.0 Ga, and an older enriched lithospheric component is not eliminated by the data, but the relationship between 1/Nd and¹⁴³Nd/¹⁴⁴Nd ratios rules out any simple mixing. UPb isotope data for plagioclase feldspars and whole-rock samples of dykes provide useful estimates of initial Pb-isotope composition of the dykes at the time of their emplacement. Initial²⁰⁶Pb/²⁰⁴Pb and²⁰⁷Pb/²⁰⁴Pb ratios vary considerably and range from 13.98 to 15.78, and 14.72 to 15.56 respectively, and suggest that the UPb fractionation responsible must have occurred at least 2.5 Ga ago.The Scourie dykes have inherited a trace element enriched component from the Lewisian lithosphere, which has resided there since ca. 3 Ga ago. Whether the dykes inherited this material from the crust or the mantle portions of the lithosphere or both, it seems likely that small basaltic melts derived from asthenospheric mantle were ultimately responsible for the enrichment. The simplest view is that these small melt fractions had been resident in the mantle part of the Lewisian lithosphere. In this case the Archaean trace-element enrichment and element fractionation in the Lewisian lithospheric mantle sampled by the dykes was closely associated in time with the generation of the 2.9 Ga old crustal portion of the lithosphere [36,37].     

A Tertiary asthenospheric flow beneath the southern French Massif Central indicated by upper mantle seismic anisotropy and related to the west Mediterranean extension

Upper mantle flow beneath the French Massif Central is investigated using teleseismic shear wave splitting induced by seismic anisotropy. About 25 three-component stations (short period, intermediate and broadband) were installed during the period 1998-1999 in the southern Massif Central, from the Clermont Ferrand volcanic area to the Mediterranean Sea. Teleseismic shear waves (SKS, SKKS and PKS) were used to determine the splitting parameters: the fast polarization direction and the delay time. Delay times ranging between 0.7 and 1.5 s have been observed at most of the sites. The azimuths of the fast split shear waves trend homogeneously NW-SE in the southern Massif Central suggesting a homogeneous mantle flow beneath this area. The observed NW-SE direction differs from the N100°E Pyrenean anisotropy further south. It does not appear to be correlated to Hercynian structures nor to the present-day motion of the plate but is well correlated to the Tertiary extension direction. We propose that the opening of the western Mediterranean induced by the rotation of the Corsica-Sardinia lithospheric block and the roll-back to the SE of the Tethys slab may have generated a large asthenospheric mantle flow beneath the southern Massif Central and a deflection of the up going plume centered beneath the northern Massif Central toward the SE.     

Geodynamic implications of deep mantle upwelling in the source of Tertiary volcanics from the Veneto region (South-Eastern Alps)

Major and trace element and Sr–Nd–Hf–Pb isotopic data for the most primitive Tertiary lavas from the Veneto region (South-Eastern Alps, Italy) show the typical features of HIMU hotspot volcanism, variably diluted by a depleted asthenospheric mantle component (⁸⁷Sr/⁸⁶Sr_i=0.70306–0.70378; _Ndi=+3.9 to +6.8; _Hfi=+6.4 to +8.1, ²⁰⁶Pb/²⁰⁴Pb_i=18.786–19.574). P-wave seismic tomography of the mantle below the Veneto region shows the presence of low-velocity anomalies at depth, which is consistent with possible upwellings of plume material. Between the depths of 100–250 km the velocity anomalies are approximately 2–2.5% slower than average, implying a temperature excess of about 220–280 K, in agreement with estimates for other mantle plumes in the world. In this context, the Veneto volcanics may represent the shallow expression of a mantle upflow. The presence of a HIMU-DM component in a collision environment has significant geodynamic implications. Slab detachment and ensuing rise of deep mantle material into the lithospheric gap is proposed to be a viable mechanism of hotspot magmatism in a subduction zone setting.     

Effective elastic thicknesses of the lithosphere in the Central Iberian Peninsula from heat flow: Implications for the rheology of the continental lithospheric mantle

The traditional view of the rheology of the continental lithosphere, sometimes known as the “jelly sandwich model”, consists of a strong upper crust, a weak lower crust, and a strong upper lithospheric mantle. Some authors argue, however, that the lithospheric mantle is weak and contributes little to the total strength and the effective elastic thickness of the lithosphere; this weakness is claimed to be due to the mantle being wet or subjected to temperatures higher than usually believed. This paper uses the relationship between rheology of the lithosphere and heat flow to calculate theoretical effective elastic thicknesses for three regions of the central Iberian Peninsula (the Duero Basin, the Spanish Central System and the Tajo Basin), taking into account the contribution of the crust and the lithospheric mantle, for dry and wet rheologies. We found that a wet peridotite rheology for the lithospheric mantle is generally consistent with independent (based on Bouguer coherence or flexural modeling) estimates of the effective elastic thickness for the study area, whereas a dry peridotite rheology cannot be reconciled with them. Moreover, the contribution of the mantle to the bending moment of the lithosphere, and therefore to both the effective elastic thickness and the total strength of the lithosphere, is important, and it may even be the dominant contribution. Therefore, the jelly sandwich model may be considered valid for the central Iberian Peninsula.     

Experimental models of extension of continental lithosphere weakened by percolation of asthenospheric melts

Analogue models are used to investigate extension of a continental lithosphere weakened by asthenospheric melts percolating through the upper mantle, a process that has been hypothesised to control the opening of the Ligurian Tethys. Models were performed in a centrifuge apparatus and reproduced, by using materials such as sand and viscous mixtures, extension of 60-km thick, three-layer continental lithosphere floating above the asthenosphere. The percolated lithospheric mantle was assumed to be characterised by a rheological behaviour similar to that of the asthenosphere. Two sets of experiments investigated the influence on deformation of (1) the thickness of the percolated mantle and the associated strength contrast between the normal and weakened lithosphere, and (2) the lateral width of the weakened zone. Model results suggest that mantle percolation by asthenospheric melts is able to promote strong localised thinning of the continental lithosphere, provided that a significant thickness of the lithospheric mantle is weakened by migrating melts within a narrow region. Strain localisation is maximised for percolation of the whole lithospheric mantle and strong strength contrast between the normal and weakened lithosphere. Under these conditions, the thickness of the lithosphere may be reduced to less than 12 km in 3 Ma of extension. Conversely, localised thinning is strongly reduced if the thickness of the percolated zone is ≤1/3 of the thickness of the whole lithospheric mantle and/or the lithosphere is weakened over wide regions. Overall, model results support the working hypothesis that mantle percolation by asthenospheric melts is a controlling factor in the transition from distributed continental deformation to localised oceanic spreading.     

A deep geophysical study in the Baikal region

Experimental data show that in East Siberia resistivity curves, irrespective of their trends, are affected by galvanic (local) distortions. The preliminary step of the magnetotelluric data processing is to obtain a steady shape of resistivity curves reflecting a true deep section. For this purpose statistical averaging and different criteria of impedance rejecting were used. The available MTS curves were normalized by level to the global magnetovariation curves. Two-dimensional modelling was performed from several sublatitudinal profiles crossing the Baikal rift zone. Three-dimensional models based on two-dimensional modelling and on induction vector distribution have been computed via programs of M. N. Yudin. Following other researchers, two conductive layers are distinguished: i) the mid- and low crustal and ii) the mantle one, with the layer surface uplifted from 100–110 km depth in the southern Baikal rift zone to 60–70 km northeastwards along the eastern Baikal coast. The top of this layer seems to correspond to the asthenospheric roof. The asthenosphere deepening in southern BRZ is likely to be related to a decrease in the asthenospheric bulge width and an increase in the rate of lithospheric thickening with mantle degasing. The origin and evolution of the Baikal rift is considered, proceeding from the model of passive rifting with regard to a long-existing lithospheric inhomogeneity between the Siberian platform and the Sayan-Baikal folded area.