Heavy metals in surface sediments from nine estuaries along the coast of Bohai Bay,Northern China

Concentrations of heavy metals in river water and sediment were investigated in nine estuaries along the coast of Bohai Bay, Northern China. Multivariate statistical techniques such as principal component analysis and cluster analysis, in combination with metal concentration analysis and correlation analysis, were used to identify the possible sources of the metals and the pollution pattern in nine estuaries along the coast of Bohai Bay. The environmental risks of metals, evaluated by sediment quality guidelines and background values, revealed Hg contamination in the estuaries. However, levels of Cd in estuarine sediments were low, and they were less than those levels in river sediments, partly due to the high mobility and dilution of river or seawater. Cd did not contribute to sediment deposits in estuaries. High organic matter from effluents from large municipal sewage treatment plants was predominantly responsible for restricting Hg mobility from the river to Bohai Bay.     

Distribution,fractionation, and contamination assessment of heavy metals in offshore surface sediments from western Xiamen Bay,China

Surface sediment samples were collected at 21 offshore sites in western Xiamen Bay, Southeast China.Total concentrations of Li, V, Cr, Co, Ni, Cu, Zn, Sr, Mn,Pb, Ba, Fe, and Ti were determined by inductively coupled plasma-optical emission spectrometry; Hg was determined by atomic fluorescence spectrometry. A modified BCR sequential extraction procedure was used to extract fractions of the above elements. Concentrations of Pb, Cr, and Hg at most sites met the primary standard criteria of Marine Sediment Quality except site S12 for Pb and S7 for Cr, while concentrations of Zn at 17 sites and Cu at seven sites exceeded the criteria. The mean concentration of Hg was three times higher than the background, with a possible source being the Jiulong River. Fe, Ti, Ba, Co, V, and Li dominated the residual phase, mainly from terrestrial input.Ni, Cr, Pb, and Hg in the non-residual phase varied largely between sites. Sr, Mn, Cu, and Zn were mainly in the nonresidual fraction. Most sites showed considerable ecological risk; exceptions were site S7(very high) and sites S10,S11, and S14(moderate). Cu showed moderate-to-high pollution and Pb exhibited no-to-low pollution, while other metals had a non-pollution status according to their ratios of secondary phase to primary phase(RSP). Results of two assessment methods showed moderate pollution and a veryhigh ecological risk for Cu, Zn, Ni, and Cr at site S7, which might be due to the local sewage treatment plant.     

Heavy metal contamination and ecological risk in Spartina alterniflora marsh in intertidal sediments of Bohai Bay,China

To investigate the effects of Spartina alterniflora on heavy metals pollution of intertidal sediments, sediment cores of a S. alterniflora salt marsh and a mudflat in Bohai Bay, China were analyzed. The results showed that S. alterniflora caused higher total C and P, but lower bulk density and electrical conductivity. The levels of Cd, Cu and Pb were higher in S. alterniflora sediment. Both Cd and Zn were higher than the probable effect level at both sites, indicating their toxicological importance. The geo-accumulation and potential ecological risk indexes revealed higher metal contamination in S. alterniflora sediment. Multivariate analysis implied that anthropogenic activities altered mobility and bioavailability of heavy metals. The percentage of mobile heavy metals was higher in S. alterniflora sediment, indicating improvement of conversion from the immobilized fraction to the mobilized fraction. These findings indicate that S. alterniflora may facilitate accumulation of heavy metals and increase their bioavailability and mobility.     

The distribution of trace metals in Florida Bay sediments

The distribution of trace metals based on surface sediments collected at 40 stations across Florida Bay was done in June, November and February 2000-2001. Concentrations of Sc, V, Ba, Cd, Cr, Co, Cu, Pb, Mn, Ni, Zn, Al and Mg were determined by ICP-MS, and the total Fe was determined by spectrophotometry. Organic carbon (OC), nitrogen (N), and calcium carbonate (CaCO3) were also measured. Eleven of 13 metals showed a similar distribution pattern for the various months studied. Maximum concentrations of metals were lower than those found in most estuarine systems and were concentrated in the north-central and western zones of the Bay. The Mn and Fe concentrations, unlike the other metals, gradually decreased from north (Everglades) to south (Florida Keys). Some metals (Ni, Zn, Cu, Cr, Pb and Ba) associated with petroleum use showed high concentrations at stations near the Tavernier marina. Florida Bay sediments are predominately CaCO3 (65.9-92.5%). The greatest value for OC (5.5%) and the lowest value of CaCO3 (65.9%) were found in the western zone. Trace metal distribution patterns are similar to the OC and N in the sediments. There was a strong correlation between most metals (V>Cu>Ni>Cr>Al>Co>Ba>Zn>Pb>Mg) and the percentage of OC. The maximum C/N values (9-12) were observed at the stations with the highest OC, where dense colonies of seagrass are found and most of the metals are concentrated. All metals except Mg, Mn and Co showed a strong correlation with Al and the fine fraction of the sediments (aluminosilicates) associated with continental input and river runoff.     

The distribution and speciation of trace metals in surface sediments from the Pearl River Estuary and the Daya Bay, Southern China

Surface sediments collected from the Pearl River Estuary (PRE) and the Daya Bay (DYB) were analyzed for total metal concentrations and chemical phase partitioning. The total concentrations of Cr, Cu, Ni, Pb, and Zn in the PRE were obviously higher than those in DYB. The maximum concentrations of trace metals in DYB occurred in the four sub-basins, especially in Dapeng Cove, while the concentrations of these metals in the western side of the PRE were higher than those in the east side. Such distribution pattern was primarily due to the different hydraulic conditions and inputs of anthropogenic trace metals. The chemical partitioning of metals analyzed by the BCR sequential extraction method showed that Cr, Ni, and Zn of both areas were present dominantly in the residual fraction, while Pb was found mostly in the non-residual fractions. The partitioning of Cu showed a significant difference between the two areas.     

Total petroleum hydrocarbons and heavy metals in the surface sediments of Bohai Bay,China: Long-term variations in pollution status and adverse biological risk

Surface sediments collected from 2001 to 2011 were analyzed for total petroleum hydrocarbons (TPH) and five heavy metals. The sediment concentration ranges of TPH, Zn, Cu, Pb, Cd and Hg were 6.3–535 μg/g, 58–332 μg/g, 7.2–63 μg/g, 4.3–138 μg/g, 0–0.98 μg/g, and 0.10–0.68 μg/g, respectively. These results met the highest marine sediment quality standards in China, indicating that the sediment was fairly clean. However, based on the effects range-median (ERM) quotient method, the calculated values for all of the sampling sites were higher than 0.10, suggesting that there was a potential adverse biological risk in Bohai Bay. According to the calculated results, the biological risk decreased from 2001 to 2007 and increased afterwards. High-risk sites were mainly distributed along the coast. This study suggests that anthropogenic influences might be responsible for the potential risk of adverse biological effects from TPH and heavy metals in Bohai Bay.     

Geochemical and geo-statistical assessment of selected heavy metals in the surface sediments of the Gorgan Bay,Iran

We investigated heavy metal concentrations of zinc (Zn), copper (Cu), chromium (Cr), and lead (Pb), their spatial distribution and enrichment factor index in surface sediments of the Gorgan Bay. Sediment Quality Guidelines were also applied to assess adverse biological effects of these metals. Heavy metals were determined by inductively coupled plasma-mass spectroscopy (ICP-MS). The results indicated mean concentrations (ppm) of heavy metals were (mean ± S.D.) Pb: 11.5 ± 4.88, Cu: 18 ± 8.83, Zn: 42 ± 22.15 and Cr: 32 ± 15.19. Based on Enrichment index, the Gorgan Bay is a low-enriched to non-enriched bay. Heavy metal contents were lower than the standard limits of PEL, ERL, and ERM that reveal no threatening influence of the metals in the Bay.     

Assessment of metal contamination in surface sediments from Zhelin Bay,the South China Sea

Metals and biogenic elements were analyzed from surface sediments collected from Zhelin Bay in the South China Sea in December 2008. The high concentrations of TOC, TN and BSi indicate the high nutrient level and diatom productivity in Zhelin Bay. The concentrations of metals were generally far lower than the effects-range-low (ERL) values that define pollutant levels. Enrichment factors (EF) and geoaccumulation indices (I_geo) suggest there are pollution levels of Cd, Cu and Zn at some stations. As, Cu, and Pb are potentially biotoxic in some stations. Correlation and principal component analyses indicate that most of the metals primarily originate from natural sources, and from maricultural activities as well. Mariculture contributes considerable Cd and Cu contamination. As and Pb comes primarily from combustion of gasoline and diesel fuel by ships.     

The distribution and sources of heavy metals in Izmit Bay surface sediments affected by a polluted stream

Dil Deresi stream is a highly contaminated stream passing through the most heavily industrialized area of Izmit Bay. In this research, surface sediments in the <63-microm fraction collected from 34 sites at western part of Izmit Bay, Northeastern Marmara Sea, Turkey were analyzed by ICP-AES for Al, As, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sn and Zn. Metal concentrations were compared with the marine sediment quality standards (SQS) and literature data to assess the pollution status of the sediments. Enrichment factors (EFs) were calculated to assess whether the concentrations observed represent background or contaminated levels. The analysis revealed three groups of elements: (1) Sn is the most enriched element; (2) As, Cd, Pb and Zn are minor enriched elements; and (3) Co, Cr, Cu, Fe, Mg, Mn and Ni are at background concentrations. The distribution maps of the concentrations and enrichment factors for all heavy metals were also produced as a contour plot based on Geographic Information System (GIS) technology.     

Content and distribution of trace metals in surface sediments from the northern Bering Sea,Chukchi Sea and adjacent Arctic areas

Concentrations of trace metals (Zn, Cr, Cu, V, Cd and Pb), total organic carbon (TOC), black carbon (BC) and their granulometry were examined in 25 surface sediment samples from the northern Bering Sea, Chukchi Sea and adjacent areas. Trace metal concentrations in the sediments varied from 21.06–168.21 mg kg⁻¹ for Zn, 8.91–46.94 mg kg⁻¹ for Cr, 2.69–49.39 mg kg⁻¹ for Cu, 32.46–185.54 mg kg⁻¹ for V, 0.09–0.92 mg kg⁻¹ for Cd, and 0.95–15.25 mg kg⁻¹ for Pb. The geoaccumulation index (I_geo) indicated that trace metal contamination (Zn and Cd) existed in some stations of the study area. The distribution of grain size plays an important role in influencing the distribution of trace metals (Zn, Cr, Cu, V, and Pb) in sediments from the Chukchi Sea and adjacent areas.     

Content and distribution of trace metals in surface sediments from the northern Bering Sea, Chukchi Sea and adjacent Arctic areas

Concentrations of trace metals (Zn, Cr, Cu, V, Cd and Pb), total organic carbon (TOC), black carbon (BC) and their granulometry were examined in 25 surface sediment samples from the northern Bering Sea, Chukchi Sea and adjacent areas. Trace metal concentrations in the sediments varied from 21.06-168.21 mg kg(-1) for Zn, 8.91-46.94 mg kg(-1) for Cr, 2.69-49.39 mg kg(-1) for Cu, 32.46-185.54 mg kg(-1) for V, 0.09-0.92 mg kg(-1) for Cd, and 0.95-15.25 mg kg(-1) for Pb. The geoaccumulation index (Igeo) indicated that trace metal contamination (Zn and Cd) existed in some stations of the study area. The distribution of grain size plays an important role in influencing the distribution of trace metals (Zn, Cr, Cu, V, and Pb) in sediments from the Chukchi Sea and adjacent areas.     

DDT, PAH and PCB in sediments from the intertidal zone of the Bohai Sea and the Yellow Sea

Current contents of persistent organic contaminants, polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs) and the congeners (naphthalene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, chrysene, benzo(a)anthracene, benzo(a)pyrene and benzo(e)pyrene), DDTs and metabolites in the intertidal sediments of the Bohai Sea and the Yellow Sea were studied. The mean levels of DDTs, PAHs and PCBs were 177.52, 877.2 and 3.4 ng g-1 dry weight, respectively. The spatial trends of the contaminant residue levels were analysed too.     

Geochemistry of organic carbon and nitrogen in surface sediments of coastal Bohai Bay inferred from their ratios and stable isotopic signatures

Total organic carbon (TOC), total nitrogen (TN) and their δ(13)C and δ(15)N values were determined for 42 surface sediments from coastal Bohai Bay in order to determine the concentration and identify the source of organic matter. The sampling sites covered both the marine region of coastal Bohai Bay and the major rivers it connects with. More abundant TOC and TN in sediments from rivers than from the marine region reflect the situation that most of the terrestrial organic matter is deposited before it meets the sea. The spatial variation in δ(13)C and δ(15)N signatures implies that the input of organic matter from anthropogenic activities has a more significant influence on its distribution than that from natural processes. Taking the area as a whole, surface sediments in the marine region of coastal Bohai Bay are dominated by marine derived organic carbon, which on average accounts for 62±11% of TOC.     

Distribution and source of heavy metals in the surface sediments from the near-shore area,north Jiangsu Province,China

Samples of surface sediment and vibrocore were collected in the near-shore area of north Jiangsu Province for grain size, elements, ²¹⁰Pb_excess and ¹³⁷Cs analyses. In our study area, the diversity of metal concentration was controlled not by the grain size, but by the source. The element content of the old Yellow River Delta was used as baseline for our study area. Geoaccumulation indexes indicate that no station was polluted by Cu, Pb, Zn and As, but the I_geo values of As were close to zero in some stations. Slight pollution caused by Cd was observed in some stations. Correlation and enrichment factors suggest that Cu, Pb and Zn are lithogenic in origin, while As and Cd are mixed in origin. Especially, in some polluted stations Cd was obviously anthropogenic in origin.     

Trace metals, PAHs, and PCBs in sediments from the Jobos Bay area in Puerto Rico

This study provides baseline information on the extent of contamination in sediments of the Jobos Bay estuary and surrounding areas in Puerto Rico. Sediments from Jobos Bay area (n = 14) had higher overall average concentrations than those from La Parguera area (n = 5, used as reference site), in μg/g dw, for As (17 vs 9), Cu (29 vs 14), Pb (11 vs 4), and Zn (64 vs 28); and in %, for Fe (2.6 vs 0.6). Sediments (n = 8) screened for PAHs and PCBs exhibited total concentrations (ng/g dw) that ranged from 40.4 to 1912, and from not detected to 11.21, respectively. The quality of sediments of Jobos Bay could be classified as low to moderate pollution. The proximity to anthropogenic sources of contamination warrants a monitoring program for inorganic and organic pollutants in Jobos Bay area for an effective coastal management program of this tropical ecosystem.