共查询到20条相似文献,搜索用时 93 毫秒
1.
STELIOS NICOLAIDES 《Sedimentology》1995,42(2):249-266
The Early to Middle Cambrian Red Heart Dolomite and lower Arthur Creek Formation of the southern portion of the Georgina Basin, Australia, is an entirely dolomitized succession of shallow-water evaporitic mudflat and deeper-water subtidal lithologies. Three types of dolomite have been identified and are interpreted as: (1) syndepositional dolomite; (2) regional replacement dolomite; and (3) void-filling dolomite (cement). Syndepositional dolomite, derived from saline pore fluids developed in a sabkha environment, is a minor dolomite type with very fine crystal mosaics and has a mottled, non-zoned cathodoluminescence. The widespread regional replacement dolomite ranges from fine- to medium-crystalline forming mainly planar-s and non-planar-a crystal mosaics, and displays blotchy, mottled, non-zoned cathodoluminescence. Void-filling dolomite commonly forms planar-s to planar-e, medium to very coarse crystal mosaics. Rare non-planar-c, very coarsely crystalline saddle dolomite also exists. Void-filling dolomite has a successively zoned cathodoluminescence pattern from non-, to brightly, to dully luminescent. Geochemically, the syndepositional dolomite has δ18O (PDB) values ranging between ? 5.3 and ? 8.6%o. Regional replacement dolomites exhibit a wide range of δ18O values from ? 3.3 to ? 10.9%o whereas void-filling dolomite has δ18O values ranging from ? 10.8 to ? 14.3%o. All three dolomite types have similar δ13C (PDB) values, in the range between +1.7 and ?1.7%o. Three initial dolomitization episodes are interpreted: (1) a sabkha stage, forming the syndepositional dolomite and dolomitizing the evaporitic mudflat lithologies; (2) a brine-reflux stage, replacing the subtidal lithologies; and (3) a burial stage, forming the void-filling dolomite type. Final dolomite stabilization occurred during burial, at elevated temperatures, in the presence of basinal fluids, resulting in progressive recrystallization and stabilization of the earlier-formed syndepositional and replacement dolomites. Both textural and geochemical evolution should be taken into account when studying the origin of dolomites, based on their present geochemical composition. Sulphates are represented by very fine-crystalline syndepositional anhydrite in association with the syndepositional dolomite, and coarse to very coarse anhydrite cement. Evaportic mudflat (sabkha) and burial environments are inferred for the origin of the former and the latter anhydrite types, respectively. Evaporite dissolution breccias, indicative of the former presence of evaporites, are common throughout the succession. 相似文献
2.
《Sedimentology》2018,65(6):2003-2033
Cenozoic ‘island dolostones’ are found on islands throughout the oceans of the world. Due to their geological youth and lack of deep burial, these dolostones provide an opportunity to resolve some of the mysteries surrounding the dolomite problem. In island dolostone bodies, which are of variable size and variable dolomitization, the petrographic and geochemical properties of the dolostones are characterized by geographic and stratigraphic variations. In the larger island‐wide dolostone bodies, like those found on Grand Cayman, there are progressive increases in mole %Ca (%Camean: 53·9 to 57·6%), depletion of the heavier 18O and 13C isotopes (δ18Omean: 3·6 to 2·1‰ VPDB; δ13Cmean: 3·1 to 1·4‰ VPDB), and changes from fabric‐retentive to fabric‐destructive fabrics and a decrease in the amount of dolomite cement from the coastal areas towards the centres of the islands, similar to the Little Bahama Bank. These changes define geographically concentric zones that parallel the coastlines and reflect geochemical modification of the dolomitizing fluid through water–rock interactions, mixing with meteoric water and the changes in the rate and flux of seawater as it flowed from coasts to island interiors. The pattern of dolomitization, however, is not consistent from island to island because geographic and stratigraphic variations, specific to each island, influenced groundwater flow pattern (for example, geometry and size of the islands; the porosity and permeability of the precursor limestone), the duration of the dolomitization reaction, and other factors. The geographic extent of dolomitization and variation in dolomite stoichiometry of island dolostones may be comparable to the reaction stages established in high‐temperature laboratory experiments. 相似文献
3.
REE distribution, strontium content and oxygen isotopic composition have been studied in the Lower Cretaceous dolomites and their interbedded and/or parental limestones of Central Tunisia. Dolomites, as indicated by previous sedimentologic, geochemical and isotopic study, are different in origin. Environments of dolomite formation include: evaporitic sabkha, deep phreatic, karst and lacustrine. With the exception of the sabkha environment, dolomitizing fluids presumably have been essentially meteoric. The comparison between REE distributions in dolomites and limestones clearly suggests that the general shapes of the REE patterns are preserved during dolomitization. Nevertheless, the total REE amounts are somewhat lowered in dolomites comparatively to parental limestones. Moreover, within the dolomites, the total REE contents are positively correlated to the Sr and δ18O contents; thus indicating that the decrease in REE, Sr, and δ18O contents is related to a decrease in the salinity of dolomitizing fluids. In addition, dolomites associated with emergence surfaces (karst) are the most impoverished in REE. Furthermore, they are relatively enriched in light REE, indicating a more or less important fractionation with the REE distributions. This enrichment has been related to the influence of the inorganic complexes which favours the greatest solubility of the heavy REE in basic solution with respect to the lightest members of the REE group. 相似文献
4.
Multistage hydrothermal dolomites in the Middle Devonian (Givetian) carbonates from the Guilin area, South China 总被引:5,自引:0,他引:5
Pervasive dolomites occur preferentially in the stromatoporoid biostromal (or reefal) facies in the basal Devonian (Givetian) carbonate rocks in the Guilin area, South China. The amount of dolomites, however, decreases sharply in the overlying Frasnian carbonate rocks. Dolostones are dominated by replacement dolomites with minor dolomite cements. Replacement dolomites include: (1) fine to medium, planar‐e floating dolomite rhombs (Rd1); (2) medium to coarse, planar‐s patchy/mosaic dolomites (Rd2); and (3) medium to very coarse non‐planar anhedral mosaic dolomites (Rd3). They post‐date early submarine cements and overlap with stylolites. Two types of dolomite cements were identified: planar coarse euhedral dolomite cements (Cd1) and non‐planar (saddle) dolomite cements (Cd2); they post‐date replacement dolomites and predate late‐stage calcite cements that line mouldic vugs and fractures. The replacement dolomites have δ18O values from ?13·7 to ?9·7‰ VPDB, δ13C values from ?2·7 to + 1·5‰ VPDB and 87Sr/86Sr ratios from 0·7082 to 0·7114. Fluid inclusion data of Rd3 dolomites yield homogenization temperatures (Th) of 136–149 °C and salinities of 7·2–11·2 wt% NaCl equivalent. These data suggest that the replacive dolomitization could have occurred from slightly modified sea water and/or saline basinal fluids at relatively high temperatures, probably related to hydrothermal activities during the latest Givetian–middle Fammenian and Early Carboniferous times. Compared with replacement dolomites, Cd2 cements yield lower δ18O values (?14·2 to ?9·3‰ VPDB), lower δ13C values (?3·0 to ?0·7‰ VPDB), higher 87Sr/86Sr ratios (≈ 0·7100) and higher Th values (171–209 °C), which correspond to trapping temperatures (Tr) between 260 and 300 °C after pressure corrections. These data suggest that the dolomite cements precipitated from higher temperature hydrothermal fluids, derived from underlying siliciclastic deposits, and were associated with more intense hydrothermal events during Permian–Early Triassic time, when the host dolostones were deeply buried. The petrographic similarities between some replacement dolomites and Cd2 dolomite cements and the partial overlap in 87Sr/86Sr and δ18O values suggest neomorphism of early formed replacement dolomites that were exposed to later dolomitizing fluids. However, the dolomitization was finally stopped through invasion of meteoric water as a result of basin uplift induced by the Indosinian Orogeny from the early Middle Triassic, as indicated by the decrease in salinities in the dolomite cements in veins (5·1–0·4 wt% NaCl equivalent). Calcite cements generally yield the lowest δ18O values (?18·5 to ?14·3‰ VPDB), variable δ13C values (?11·3 to ?1·2‰ VPDB) and high Th values (145–170 °C) and low salinities (0–0·2 wt% NaCl equivalent), indicating an origin of high‐temperature, dilute fluids recharged by meteoric water in the course of basin uplift during the Indosinian Orogeny. Faults were probably important conduits that channelled dolomitizing fluids from the deeply buried siliciclastic sediments into the basal carbonates, leading to intense dolomitization (i.e. Rd3, Cd1 and Cd2). 相似文献
5.
Late Miocene platform carbonates from Nijar, Spain, have been extensively dolomitized. Limestones are present in the most landward parts of the platform, in stratigraphically lower units and topographically highest outcrops, suggesting that dolomitizing fluids were derived from the adjacent Nijar Basin. The dolomite crystals range from <10 to ≈100 μm existing as both replacements and cements. Na, Cl and SO4 concentrations in the dolomites range from 200 to 1700 p.p.m., 250–650 p.p.m., and 600–7000 p.p.m., respectively, comparable with other Tertiary and modern brine dolomite values, and also overlapping values from mixing-zone dolomites. Sr concentrations range between 50 and 300 p.p.m., and the molar Sr/Ca ratios of dolomitizing fluids are estimated to range between 7× seawater brine to freshwater ratios. The δ18O and δ13C of the dolomites range from ?1·0 to +4·2‰ PDB, and ?4·0 to +2·0‰ PDB, respectively. 87Sr/86Sr values (0·70899–0·70928) of the dolomites range from late Miocene seawater to values greater than modern seawater. Mixtures of freshwater with seawater and evaporative brines probably precipitated the Nijar dolomites. Modelled covariations of molar Sr/Ca vs. δ18O and Na/Ca vs. δ18O from these mixtures are consistent with those of the proposed Nijar dolomitizing fluids. Complete or partial dolomite recrystallization is ruled out by well preserved CL zoning, nonstoichiometry and quantitative water–rock interaction modelling of covariations of Na vs. Sr and δ18O vs. δ13C. The possibility of multiple dolomitization events induced by evaporative brines, seawater and freshwater, respectively, is consistent with mineral-mineral mixing modelling. The basin-derived dolomitizing brines probably mixed with freshwater in the Nijar Basin or mixed with fresh groundwater in the platform, and were genetically related either to deposition of the Yesares gypsum or the Feos gypsum. Dolomitization occurred during either the middle Messinian or the early upper Messinian. Nijar dolomitization models may be applicable to dolomitization of other late Miocene platform carbonates of the western Mediterranean. Moreover, the Nijar models may offer an analogue for more ancient evaporite-absent platform carbonates fringing evaporite basins. 相似文献
6.
The Trigonodus Dolomit is the dolomitized portion of the homoclinal ramp sediments of the Middle Triassic Upper Muschelkalk in the south‐east Central European Basin. Various dolomitizing mechanisms, followed by recrystallization, have been previously invoked to explain the low δ18O, high 87Sr/86Sr, extensive spatial distribution and early nature of the replacive matrix dolomites. This study re‐evaluates the origin, timing and characteristics of the dolomitizing fluids by examining petrographic and isotopic trends in the Trigonodus Dolomit at 11 boreholes in northern Switzerland. In each borehole the ca 30 m thick unit displays the same vertical trends with increasing depth: crystal size increase, change from anhedral to euhedral textures, ultraviolet‐fluorescence decrease, δ18OVPDB decrease from ?1·0‰ at the top to ?6·7‰ at the base and an 87Sr/86Sr increase from 0·7080 at the top to 0·7117 at the base. Thus, dolomites at the top of the unit record isotopic values similar to Middle Triassic seawater (δ18OVSMOW = 0‰; 87Sr/86Sr = 0·70775) while dolomites at the base record values similar to meteoric groundwaters from the nearby Vindelician High (δ18OVSMOW = ?4·0‰; 87Sr/86Sr = >0·712). According to water–rock interaction modelling, a single dolomitizing or recrystallizing fluid cannot have produced the observed isotopic trends. Instead, the combined isotopic, geochemical and petrographic data can be explained by dolomitization via seepage‐reflux of hypersaline brines into dense, horizontally‐advecting groundwaters that already had negative δ18O and high 87Sr/86Sr values. Evidence for the early groundwaters is found in meteoric calcite cements that preceded dolomitization and in fully recrystallized dolomites with isotopic characteristics identical to the groundwaters following matrix dolomitization. This study demonstrates that early groundwaters can play a decisive role in the formation and recrystallization of massive dolomites and that the isotopic and textural signatures of pre‐existing groundwaters can be preserved during seepage‐reflux dolomitization in low‐angle carbonate ramps. 相似文献
7.
Dolomitization of the Capitan Formation forereef facies (Permian, west Texas and New Mexico): seepage reflux revisited 总被引:5,自引:0,他引:5
Abstract Interpretation of seepage reflux dolomitization is commonly restricted to intervals containing evaporites even though several workers have modelled reflux of mesosaline brines. This study looked at the partially dolomitized forereef facies of the Capitan Formation to test the extent of reflux dolomitization and evaluate the possible role of the near‐backreef mesosaline carbonate lagoon as an alternative source of dolomitizing fluids. The Capitan Formation forereef facies ranges from 10% to 90% dolomite. Most of the dolomite is fabric preserving and formed during early burial after marine cementation, before and/or during evaporite cementation and before stylolitization. Within the forereef facies, dolomite follows depositional units, with debris‐flow and grain‐flow deposits the most dolomitized and turbidity‐current deposits the least. The amount of dolomite increases with stratigraphic age and decreases downslope. Within the reef facies, dolomite is restricted to haloes around fractures and primary cavities except where the reef facies lacks marine cements and, in contrast, is completely dolomitized. This dolomite distribution supports dolomitization by sinking fluids. Oxygen isotopic values for fabric‐preserving dolomite (δ18O = 0·9 ± 1·0‰, N = 101) support dolomitization by sea water to isotopically enriched sea water. These values are closer to the near‐backreef dolomite (δ18O = 2·1 ± 0·7‰, N = 48) than the hypersaline backreef dolomite (δ18O = 3·6 ± 0·9‰, N = 11). Therefore, the fabric‐preserving dolomite is consistent with dolomitization during seepage reflux of mainly mesosaline brines derived from the near‐backreef carbonate lagoon. The occurrence of mesosaline brine reflux in the Capitan Formation has important implications for dolomitization in forereef facies and elsewhere. First, any area with a restricted carbonate lagoon may be dolomitized by refluxing brines even if there are no evaporite facies present. Secondly, such brines may travel significant distances vertically provided permeable pathways (such as fractures) are present. Therefore, the absence of immediately overlying evaporite or restricted facies is not sufficient cause to eliminate reflux dolomitization from consideration. 相似文献
8.
The dolomites at Navan, Ireland, formed in Courceyan peritidal and shallow-shelf limestones. The dolomite body has a plume-like geometry, cross-cutting both lithological boundaries and diagenetic barriers generated by sea-floor cementation and emergence. The dolomitizing fluids rose parallel to major faults to diffuse laterally through the succession, controlled by variations in permeability that reflect both facies variation on deposition and pre-dolomitization diagenesis. Cathodoluminescent zones reveal three principal stages of dolomite emplacement, separated by dissolution surfaces, with each stage reflecting several changes in the character of dolomitizing solutions. The predominance of dull zones indicates burial rather than surface conditions. The dolomites formed some time after burial in response to an areally limited hydrothermally-driven flow. Isotope values (σ18O of — 6σ6 to — 10.4%δ and σ13C of — 0σ2 to +2σ5%δ PDB), and fluid inclusion data, suggest that these fluids had compositions similar to those of Carboniferous seawater. However, these became hotter with time, with temperature increasing from 60 to 160δC. The Navan dolomites are closely associated with Europe's largest zinc-lead deposit. The distribution of the ores follows the same trend as that of the dolomites and paragenetic relationships indicate that dolomitization and mineralization were temporally and genetically related. 相似文献
9.
Fault-controlled dolomitization at Swan Hills Simonette oil field (Devonian), deep basin west-central Alberta, Canada 总被引:6,自引:0,他引:6
The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (Th=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (Tpeak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more 87Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on 87Sr/86Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and 206Pb/204Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity. 相似文献
10.
JOHN D. HUMPHREY 《Sedimentology》1988,35(2):327-348
ABSTRACT Field, geochemical, and petrographic data for late Pleistocene dolomites from southeastern Barbados suggest that the dolomite precipitated in the zone of mixing between a coastal meteoric phreatic lens and normal marine waters. The dolomite is localized in packstones and wackestones from the algalAmphistegina fore-reef calcarenite facies. Stable isotopic evidence suggests that meteoric water dominated the diagenetic fluids responsible for dolomitization. Carbon isotopes in pure dolomite phases average about -15%0 PDB. This light carbon is attributed to the influence of soil gas CO2, and precludes substantial mixing with seawater. A narrow range of oxygen isotopic compositions coupled with a wide range of carbon compositions attest to the meteoric diagenetic overprint. Dolomitization likely occurred with as little as a five per cent admixture of seawater. Strontium compositions of the dolomites indicate probable replacement dolomitization of original unstable mineralogy. The dolomite is characterized by low sodium values. Low concentrations of divalent manganese and iron suggest oxidizing conditions at the time of dolomitization. A sequence of petrographic features suggests a progression of diagenetic fluids from more marine to more meteoric. Early marine diagenesis was followed by replacement dolomitization of skeletal grains and matrix. Limpid, euhedral dolomite cements precipitated in primary intra- and interparticle porosity subsequent to replacement dolomitization. As waters became progressively less saline, dolomite cements alternated with thin bands of syntaxial calcite cement. The final diagenetic phase precipitated was a blocky calcite spar cement, representing diagenesis in a fresh-water lens. This sequence of diagenetic features arose as the result of a single fall in eustatic sea-level following deposition. A stratigraphic-eustatic-diagenetic model constrains both the timing and rate of dolomitization in southeastern Barbados. Dolomitization initiated as sea-level began to fall immediately following the oxygen isotope stage 7–3 high stand, some 216 000 yr bp . Due to the rapidity of late Pleistocene glacio-eustasy, dolomitization (locally complete) is constrained to have occurred within about 5000 yr. 相似文献
11.
Multiple-step recrystallization within massive ancient dolomite units: an example from the Dinantian of Belgium 总被引:3,自引:0,他引:3
South of the Caledonian Brabant-Wales Massif a more than 200 m thick Tournaisian to Lower Visean replacive dolomite unit can be followed for several hundred kilometres from the Boulonnais (France) to Aachen (Germany). Field observations, of features such as karst cavities occurring at the top of the Lower Visean dolomite which are filled by Lower Visean crinoidal limestone, indicate that dolomitization and karstification took place during the Early Visean. This early development of the dolomite is in agreement with the presence of stylolites cutting the dolomite fabric. The minor element composition of the majority of the dolomites remains almost uniform throughout the entire studied area. Values for Fe, Mn, Na and Sr are normally in the range 700–4700 ppm, 15–400 ppm, 80–300 ppm and 50–200 ppm, respectively. The δ13C values (range-0.72 to +5.31%o) mainly reflect the carbon isotopic composition of the precursor limestones. The δ18O values, in contrast, are highly variable: ranging from-19.15 to +0.85%o. This rather large range of δ18O values is explained by multiple-step re-equilibration/recrystallization during progressive burial and subsequent uplift of the dolomites. These processes are also responsible for the high 87Sr/86Sr values of the dolomites which range from about 0.7088 to 0.7098. They are distinctly more radiogenic than Lower Visean marine carbonates (0.7076–0.7078). Correlation, however, of δ18O values or 87Sr/86Sr ratios with dolomite and/or cathodoluminescenec (CL) textures has not been very successful. This suggests that recrystallization may remain unrecognized if only petrographic techniques are used. Nevertheless, certain CL textures can be related to specific interactions with the ambient recrystallizing fluids. 相似文献
12.
Fabio lapponi Thilo Bechstädt Maria Boni David A. Banks Jens Schneider 《Sedimentology》2014,61(2):411-443
Burial hydrothermal dolomitization is a common diagenetic modification in sedimentary basins with implications for oil and gas reservoir performance. Outcrop analogues represent an easily accessible source of data to refine the genetic models and assess risk in hydrocarbon exploration and production. The Palaeozoic succession of northern Spain contains numerous excellent exposures of epigenetically dolomitized limestones, particularly in the Carboniferous and Cambrian. The epigenetic dolomites in the Cambrian carbonates of the Láncara Formation are volumetrically small, but have a large aerial distribution across different tectonic units of the Variscan fold and thrust belt. Coarse crystals, abundant saddle dolomite cement, negative δ18O and fluid inclusion homogenization temperatures between 80°C and 120°C characterize these dolomites, which are petrographically and geochemically similar to the tens of kilometre‐sized hydrothermal dolomites replacing the Upper Carboniferous succession in the same area. In both cases, the dolomitizing fluids are derived from highly evaporated sea water, modified to a limited degree through fluid‐rock interaction. The dolomitization events affecting both Cambrian and Carboniferous strata are probably related to the same post‐orogenic hydrothermal fluid flow. The formation of the post‐collisional (latest Carboniferous) Cantabrian arc fostered dolomitization: the extension related to bending of the arc generated deep‐reaching faults and strike‐slip movements, which favoured the circulation of hot dolomitizing fluids in the outer parts of this orocline. A similar dolomitization process affected other areas of Europe after the main stages of the Variscan orogeny. Dolomitization was a continuous, uninterrupted, isochemical process. Limestone replacement resulted in a major porosity redistribution and focused the fluid flow into the newly created porous zones. Replacement was followed immediately by partial to complete cementation of the pores (including zebra fabrics and vugs) with saddle dolomite. The amount of porosity left depends on the volume of cement and therefore on the volume of fluids available. 相似文献
13.
Dolomitization of the Waulsortian Limestone (Lower Carboniferous) in the Irish Midlands 总被引:1,自引:0,他引:1
Jay M. Gregg Kevin L. Shelton Aaron W. Johnson Ian D. Somerville & Wayne R. Wright 《Sedimentology》2001,48(4):745-766
The Waulsortian Limestone (Lower Carboniferous) of the southern Irish Midlands is dolomitized pervasively over a much larger region than previous studies have documented. This study indicates a complex, multistage, multiple fluid history for regional dolomitization. Partially and completely dolomitized sections of Waulsortian Limestones are characterized by finely crystalline (0·01–0·3 mm) planar dolomite. Planar replacive dolomite is commonly followed by coarse (≥0·5 mm) nonplanar replacive dolomite, and pervasive void‐filling saddle dolomite cement is frequently associated with Zn–Pb mineralization. Planar dolomite has average δ18O and δ13C values (‰ PDB) of –4·8 and 3·9 respectively. These are lower oxygen and slightly higher carbon isotope values than averages for marine limestones in the Waulsortian (δ18O=–2·2, δ13C=3·7). Mean C and O isotope values of planar replacive dolomite are also distinct from those of nonplanar and saddle dolomite cement (–7·0 and 3·3; –7·4 and 2·4 respectively). Fluid inclusions indicate a complex history involving at least three chemically and thermally distinct fluids during dolomite cementation. The petrography and geochemistry of planar dolomites are consistent with an early diagenetic origin, possibly in equilibrium with modified Carboniferous sea water. Where the Waulsortian was exposed to hydrothermal fluids (70–280 °C), planar dolomite underwent a neomorphic recrystallization to a coarser crystalline, planar and nonplanar dolomite characterized by lower δ18O values. Void‐filling dolomite cement is isotopically similar to nonplanar, replacive dolomite and reflects a similar origin from hydrothermal fluids. This history of multiple stages of dolomitization is significantly more complex than earlier models proposed for the Irish Midlands and provides a framework upon which to test competing models of regional vs. localized fluid flow. 相似文献
14.
The Middle Devonian Winnipegosis carbonate unit in south‐central Saskatchewan is partially to completely dolomitized. Two major types of replacive dolomite are distinguished. Microcrystalline to finely crystalline dolomite (type 1) displays nonplanar‐a to planar‐s textures, mimetically replaces the precursor limestone, accounts for about four‐fifths of dolomite phases volumetrically, and mainly occurs in the Winnipegosis mounds and the Lower Winnipegosis Member directly underlying the mounds. Medium crystalline dolomite (type 2) shows planar‐s to planar‐e textures, commonly occurs in the Lower Winnipegosis and Brightholme members, and decreases upward in abundance. The 87Sr/86Sr ratios of type 1 dolomite (0·70795 to 0·70807) fall within the estimated Sr‐isotopic range for Middle Devonian marine carbonates. Stratigraphic, petrographic and geochemical data constrain the formation of type 1 dolomite to hypersaline sea water in a near‐surface environment, after marine cementation and sub‐aerial diagenesis and prior to precipitation of the Middle Devonian Leofnard salts. Movement of dolomitizing fluids could be driven by density differences and elevation head. The shift to lower δ18O values of type 1 dolomite [?7·4 to ?5·1‰ Vienna Pee Dee Belemnite (VPDB)] is interpreted as the result of recrystallization at elevated temperatures during burial. Type 2 dolomite has higher 87Sr/86Sr ratios (0·70809–0·70928), suggesting that the dolomite probably formed from basinal fluids with an increased richness in the radiogenic Sr isotope. In type 2 dolomite, Sr2+ concentrations are lower, and Fe2+ and Mn2+ concentrations are higher, compared with the associated limestone and type 1 dolomite. Type 2 dolomite is interpreted as having been formed from upward‐migrating basinal fluids during latest Devonian and Carboniferous period. 相似文献
15.
塔里木盆地寒武系与蒸发岩相关的白云岩储层特征及主控因素 总被引:6,自引:2,他引:4
塔里木盆地寒武系广泛发育白云岩,其中中寒武统地层沉积了巨厚的蒸发岩,蒸发岩和白云岩可以构成很好的储盖组合,该领域也是塔里木盆地未来勘探的新领域。萨布哈白云岩和渗透回流白云岩是两种与蒸发岩相关的白云岩,其储层发育的主控因素也都与蒸发岩存在着直接或间接的联系。通过对大量岩芯、薄片、主量元素、稀土元素、碳、氧稳定同位素及锶稳定同位素等地球化学测试和测井资料的细致研究,系统总结了它们的岩石学特征、地球化学特征。萨布哈白云岩储层的岩性以含石膏的泥 粉晶白云岩为特征,孔隙类型主要为膏模孔和溶塌角砾砾间孔,萨布哈白云石化作用及伴生石膏的沉淀作用和准同生期大气淡水溶蚀作用是该类储层的主控因素;渗透回流白云岩储层的岩性以保留原岩颗粒或藻(丘)格架结构的粉晶白云岩为特征,孔隙类型主要为粒间孔、铸模孔、格架孔,渗透回流白云石化作用和大气淡水溶蚀作用是该类储层的主控因素。两者主要发育于塔里木盆地干旱气候背景下的中-下寒武统地层,其分布规律主要受沉积相控制。 相似文献
16.
DJAFAR M. AISSAOUI 《Sedimentology》1988,35(5):821-841
The most ubiquitous syn-sedimentary cements affecting Mururoa atoll are composed of magnesian calcite. Three main types are distinguished: fibrous, bladed and sparitic on the basis of petrography, morphology and MgCO3 concentration of the constituting crystals, while peloid infills, a particular form of HMC chemical precipitation, also exist. Petrographic evidence and isotopic signatures are compatible with marine precipitation. Mururoa atoll was exposed several times to meteoric diagenesis resulting in varied diagenetic alterations including selective dissolution and partial dolomitization of Mg-calcite cements. These alterations are responsible for substantial modifications of the initial cement fabrics and may introduce unconformities in the diagenetic chronology. The first stage of the partial dissolution of Mg-calcite induces the development of chalky, white friable zones within the initially crystalline, hard cement layers. At ultrascale, this is due to the creation of micro-voids along the elongate cement fibres. Advanced dissolution includes total disappearance of cement portions as attested to by large voids within the cement crust and/or between superposed cement layers. Mg-calcite dissolution is related to meteoric diagenesis during periods of Quaternary exposure. The creation of voids within Mg-calcite layers is due to the mechanical removal of previously altered calcium carbonate, a process suggesting marine or non-marine water flow, probably in the vadose environment. Selective dolomitization of Mururoa cements involves alternations of calcite and dolomite which form successive cement-like rinds within primary cavities. At Mururoa, these alternations are the result of selective dolomitization of the pre-existing Mg-calcite cements rather than successive precipitation of calcite and dolomite. Selective dolomitization of Mg-calcite cements at Mururoa indicates that a given cement succession is not necessarily a simple chronological sequence. Oxygen isotope values of dolomites are enriched in δ186 by about 3‰ PDB within calcite-dolomite pseudo-alternations. The dolomitizing fluid at Mururoa seems similar to present marine water although some mixture with meteoric water is probable to favour dissolution associated with dolomitization. 相似文献
17.
MARK J. F. LAWRENCE 《Sedimentology》1994,41(3):479-498
The Late Cretaceous to Early Eocene, dominantly micritic, Amuri Limestone Group (ALG) was deposited in an approximately NW trending trough, in eastern Marlborough, New Zealand. The ALG comprises: the Mead Hill Formation; the Teredo, Lower and Middle Limestone formations; and the Upper and Lower Marl formations. Chert and dolomite are concentrated in the Mead Hill Formation, which contains five of six recognized diagenetic zones: Zone I at the base of the ALG consists almost entirely of chert; Zone II consists solely of chert and dolomite; Zone III comprises chert and limestone; Zone IV is composed of chert plus dolomite; Zone V is a chertified mudstone; and the minor amounts of chert found in the Middle Limestone Formation comprise Zone VI. With the exception of Zones IV and V, chert decreases stratigraphically upwards and away from the basin centre. All the dolomites are composed of <1 mm diameter rhombohedra in discontinuous beds and lenses. Generally Ca-rich, and non- to slightly ferroan, the dolomite contains approximately 500–900 ppm Mn and 200–400 ppm Sr. δ13C values average 1–2%PDB with δ18O ratios of about -4%PDB. Mass balance calculations indicate that the Mg2+ for dolomitization was derived from sea water. Sr, Fe and Mn concentrations are interpreted as indicating dolomite formation in the marine environment, with no influence from meteoric waters. The intimate association with pyrite implies dolomite formation in association with sulphate reduction, in the upper sediment column. δ18O data show that the bulk of the dolomite formed at temperatures below 50°C. All chert samples contain in excess of 90 wt% SiO2, about 1 wt% Al2O3 and 1 wt% from losses on ignition. Generally all other major elements total less than 2 wt% oxide. δ18O values range from 26·8 to 29·0%SMOW. Chert chemistry is consistent with the replacement of host carbonate and expulsion of carbonate-bound components from the site of chertification, and the effective dilution by SiO2 of non-carbonate-bound insoluble residues. δ18O data indicate that chert formed in fluids of similar composition and temperature as the dolomite. The abundance of disseminated pyrite in cherts implies an association with sulphate reduction. Silica for chertification is thought to have initially come from dissolution of siliceous organisms. However, there is insufficient biogenic silica available to form the volumes of chert observed. It is suggested that the bulk of the silica came from SiO2-rich pore waters generated by clay mineral reactions in the thick underlying mudstones. The ALG compacted down through these pore waters. Chert and dolomite nucleation are considered to have been penecontemporaneous. Dolomitization was initially probably the faster process, continuing as long as sulphate reduction prevailed and there was an adequate supply of Mg2+. The nucleation of chert, although initially slower (probably due to a relatively lower initial SiO2 supply), continued after cessation of dolomitization to the extent of completely chertifying the dolomite intercrystalline matrix. The amount of chertification decreased progressively as SiO2 supplies diminished, both stratigraphically upwards and away from the basin centre. 相似文献
18.
PAOLA RONCHI FLAVIO JADOUL ANDREA CERIANI ANDREA DI GIULIO PAOLO SCOTTI ANDREA ORTENZI ELISABETTA PREVIDE MASSARA 《Sedimentology》2011,58(2):532-565
The Early Jurassic dolomitized carbonates are a hydrocarbon exploration target in Northern Italy. Of these carbonates, the Liassic Albenza Formation platform and the overlying Sedrina Formation shelf were studied to define a pervasive dolomitization model and to shed light on dolomite distribution in the sub‐surface. Field work, as well as analyses of well cores, stable isotopes, trace elements and fluid inclusions, was carried out on the outcropping thrust belt and sub‐surface deformed foreland of the Southern Alps. Petrographic analyses showed a first, pervasive, replacement dolomitization phase (D1) followed by volumetrically less important dolomite cement precipitation phases (D2, D3 and D4). The δ18O values fall between ?8·2‰ and 0·1‰ Vienna‐Pee Dee Belemnite with the more depleted samples belonging to dolomite cement‐rich dolostones; the δ13C ranges from 2·6‰ to 3·7‰ Vienna‐Pee Dee Belemnite. Analysis of trace elements showed different Fe and Mn contents in the sub‐surface and outcropping dolostones, and a higher Fe in the younger dolomite cements. An increase in the precipitation temperature (up to 130 °C from fluid inclusion data) and a decrease in diagenetic fluid salinity (from sea water to brackish) are observed from the first pervasive replacement dolomite to the dolomite cement phases. Field observations indicate that, in the Albenza Formation, dolomitization was limited to palaeohighs or faulted platform margins in the Early Jurassic carbonates. The pervasive replacement phase is interpreted based on a ‘compaction model’; the formation fluids expelled from compacting basinal carbonates could have funnelled along faults into permeable palaeohighs. The high homogenization temperature of the dolomite cements and decreased salinities indicate precipitation at great depth with an influx of meteoric water. These data, along with the thermal history, suggest that the dolomite cements precipitated according to the ‘tectonic squeegee’ dolomitization model. The dolomite precipitation temperature was set against the thermal history of the carbonate platform to interpret the timing of dolomite precipitation. The dolomite precipitation temperatures (90 to 100 °C) were reached in the studied formations first in the thrust fold belt (Early Tertiary, 60 Ma), and then in the foreland succession during the Late Tertiary (10 Ma). This observation suggests that the dolomite precipitation fronts moved southwards over time, recording a ‘diagenetic wave’ linked to the migration of the orogenic system. Observations suggest that the porosity increased during the first phase of replacement dolomitization while the dolomite cementation phases partially occluded the pores. The distribution of porous dolomitized bodies is therefore linked to the ‘compaction dolomitization’ model. 相似文献
19.
塔里木、四川及鄂尔多斯盆地是中国中西部海相白云岩的主要发育地区。三大盆地重点层系海相白云岩新近的成因研究表明,大规模准同生白云岩和埋藏成因白云岩的发育均与蒸发台地密切相关。蒸发台地中由海水浓缩形成的富Mg~(2+)卤水一方面在准同生期,通过蒸发泵和下渗机制交代碳酸钙沉积物而形成与蒸发岩共生的准同生白云岩,另一方面作为富含Mg~(2+)的地层孔隙水,在准同生-浅埋藏期乃至中、深埋藏期,通过侧向渗透、侧向与垂向压实排挤和垂向热对流机制与粗结构的碳酸钙沉积物发生交代反应,在蒸发岩系周边和上下形成广泛分布的埋藏成因白云岩。与热流体作用有关的白云石化主要依靠构造断裂、裂缝、不同级次的层序界面、孔洞层等输导体系发生,分布较局限。热流体云化常表现为对先期白云岩进行叠加改造而形成热水改造白云岩。热流体性质不一,可以是深埋藏混合热水、深部循环水、地幔深部的岩浆热液等。白云石(岩)的生物成因不仅表现为微生物作用导致白云石直接沉淀,还表现为生物的存在与活动为白云石化作用提供Mg~(2+)和云化流体通道。由微生物和宏观藻释放出Mg~(2+),在埋藏期对方解石进行交代是各种富含藻类的灰岩中部分白云石的重要形成机制。生物扰动可明显改善岩石的孔渗性,从而显著促进白云石化作用的发生。 相似文献
20.
LIU Jingdong JIANG Youlu LIU Xinshe YANG Zhiwei HOU Xiangdong ZHU Rongwei WEN Caixi WANG Feiyan 《《地质学报》英文版》2017,91(4):1363-1379
We clarified three stages of dolomitization and secondary changes by studying the petrology and geochemistry characteristics of dolomite from the Ma55–Ma510 sub-members of the Ordovician Majiagou Formation in the Jingxi area in the Ordos Basin: (1) Syngenetic microbial dolomitization is characterized by formation of dolomite with a mainly micrite structure and horse tooth-shape dolomite cements. (2) Seepage reflux dolomitization during the penecontemporaneous period superposed adjustment functions such as recrystallization and stabilization in the middle-deep burial stage, forming dolomites mainly consisting of micro crystal and powder crystal structure. (3) Powder dolomite, fine dolomite, and medium-coarse crystalline dolomite formed in pores and fractures in the middle-deep burial stage. The secondary concussive transgression-regression under a regressive background is an important condition for the occurrence of many stages of dolomitization in the study area. The basin was an occlusive epicontinental sea environment in the Ma5 member of the Ordovician Majiagou Formation sedimentary period. In the sediments, sulfate content was high, which is conducive to the preservation of microbial activity and microbial dolomitization. Micritic dolomite formed by microbial dolomitization provides good migration pathways for seepage reflux dolomitization. Affected by evaporation seawater with increased Mg/Ca ratio, seepage reflux dolomitization was widely developed and formed large-scale dolomite, and underwater uplifts and slopes are favorable areas for dolomite. In the middle-deep burial stage, dolomitizing fluid in the stratum recrystallized or stabilized the previous dolomite and formed a small amount of euhedral dolomite in the pores and fractures. 相似文献