Nouvelle interprétation tectonique de la montagne Sainte-Victoire (Provence,France)

The explanation normally given for the tectonics of Sainte-Victoire Mountain, a dozen kilometres east of Aix-en-Provence, to the north of the limestone Provence, is incorrect. To the east, the morphology of the Sainte-Victoire is subdued, whereas to the west, before the mountain breaks savagely, the morphology is that of a young mountain as appears in Alpine landscapes. This unusual aspect in the region and the large subvertical faults with vertically striated surfaces that mark the massif to the south and to the west, induce the idea of strong vertical uplifts and caste doubt on the tectonic interpretation given in 1962 by Corroy et al. According to those authors, the Sainte-Victoire is a unit of Jurassic and Cretaceous formations overthrusting 1800 m to the south conglomerates of the Late Cretaceous or Palaeocene. New observations about the conglomerate transgression over the Jurassic and Cretaceous beds, and about the faults around and on the massif do not give evidence of an overthrusting but, on the contrary, induce the idea of a uplift, perhaps still active, in the form of a ‘piano key’ inclined to the northeast. To cite this article: J. Ricour et al., C. R. Geoscience 337 (2005).     

Viscous effects on penetrating shafts in clays

The penetration of rigid objects such as piles and penetrometers into soils creates a zone of soil disturbance around them. The extent of this disturbed zone influences the resistance of the moving rigid body. This paper presents a theoretical framework to analyze the resistance in the disturbed zone created by a shaft penetrating a clay soil. The soil is modeled as a viscous material after it reaches failure [critical state (CS)]. The results of this analysis show that the viscous drag stress component on the shaft surface is influenced by the size of disturbed zone that has reached CS around the shaft, the shear viscosity of the soil and the velocity profile (or strain rate) in the CS zone around the shaft. The size of CS zone, the velocity profile and the viscosity of soil are interdependent. Large variation in viscous drag occurs when the size of the CS soil zone is less than four times the shaft’s radius. Limiting drag occurs when the size of the CS soil zone exceeds six times the shaft’s radius. The theoretical velocity distribution of the movement of soil in the CS zone shows that the soil is dragged along with shaft in the near field (close to the shaft surface) and moves upwards in the far field.     

北极海冰对黄河上游汛期水量丰枯的影响分析

从北半球的冷源出发,以半球尺度来考虑北极海冰对黄河上游水量丰枯的影响,通过对北极海冰与黄河上游汛期水量的统计分析揭示其相关关系,并探讨北极海冰通过影响大气环流进而影响黄河上游水量的物理机制.     

Statistical considerations for grain-size analyses of tills

Relative percentages of sand, silt, and clay from samples of the same till unit are not identical because of different lithologies in the source areas, sorting in transport, random variation, and experimental error. Random variation and experimental error can be isolated from the other two as follows. For each particle-size class of each till unit, a standard population is determined by using a normally distributed, representative group of data. New measurements are compared with the standard population and, if they compare satisfactorily, the experimental error is not significant and random variation is within the expected range for the population. The outcome of the comparison depends on numerical criteria derived from a graphical method rather than on a more commonly used one-way analysis of variance with two treatments. If the number of samples and the standard deviation of the standard population are substituted in at-test equation, a family of hyperbolas is generated, each of which corresponds to a specific number of subsamples taken from each new sample. The axes of the graphs of the hyperbolas are the standard deviation of new measurements (horizontal axis) and the difference between the means of the new measurements and the standard population (vertical axis). The area between the two branches of each hyperbola corresponds to a satisfactory comparison between the new measurements and the standard population. Measurements from a new sample can be tested by plotting their standard deviation vs. difference in means on axes containing a hyperbola corresponding to the specific number of subsamples used. If the point lies between the branches of the hyperbola, the measurements are considered reliable. But if the point lies outside this region, the measurements are repeated. Because the critical segment of the hyperbola is approximately a straight line parallel to the horizontal axis, the test is simplified to a comparison between the means of the standard population and the means of the subsample. The minimum number of subsamples required to prove significant variation between samples caused by different lithologies in the source areas and sorting in transport can be determined directly from the graphical method. The minimum number of subsamples required is the maximum number to be run for economy of effort.     

Répartition des minéraux argileux et contrôle tectono-eustatique dans les bassins de la marge tunisienne

We have studied the clay assemblages found in the different palaeogeographic domains located at the several Tunisian margin basins, ranging in age from Palaeozoic to Neogene. This study has allowed us to characterize and highlight the relationship between the clay distribution in time and space and the geodynamic and eustatic events. Marine regressions, with the intensification of erosion, seem to be responsible for illite increases, whereas transgressions, in concordance with a warm and dry climate, coincide with the smectite dominance. The minimum marine level coincides with the abundance of palygorskite. Mineralogic changes in the clay assemblages as well as in the proportion of the different clay minerals will tentatively be related to erosive tectonic events and/or to subsiding and rifting events, marked by the inheritance or the neoformation of the several clays.     

Lower Carboniferous (Dinantian) stratigraphy and structure of the Walterstown-Kentstown area,Co. Meath,Ireland

Stratigraphic units are defined and described for the Lower Carboniferous succession in the Walterstown-Kentstown area of Co. Meath, Ireland. A complete (unexposed) Courceyan succession from the terrestrial red bed facies of the Baronstown Formation to the Moathill Formation of the Navan Group has been penetrated in several boreholes. Although the lower part of the sequence is comparable with the Courceyan succession at Navan and Slane, the middle part of the sequence differs markedly in the Walterstown-Kentstown area and two new members, the Proudstown and Walterstown Members, are defined in the upper part of the Meath Formation. Syndepositional faulting was initiated during the Courceyan, probably in latest Pseudopolygnathus multistriatus or early Polygnathus mehli latus time. Movement on the ENE trending St. Patrick's Well Fault influenced the deposition of the Walterstown Member and the overlying Moathill Formation and was probably associated with the development of the East Midlands depocentre to the south of the area. A second episode of tectonism in the latest Courceyan or early Chadian resulted in uplift and erosion and the development of ‘block and basin’ sedimentation. Subsequent transgression of the uplifted block led to the establishment of the Kentstown Platform, bounded to the north, west and south by rocks of basinal facies. The Milverton Group (Chadian-Asbian), confined to this platform, unconformably overlies Courceyan or Lower Palaeozoic strata and is subdivided into three formations: Crufty Formation (late Chadian), Holmpatrick Formation (late Chadian-Arundian) and Mullaghfin Formation (late Arundian-Asbian). The Walterstown Fault controlled the western margin of the Kentstown Platform at this time. Contemporaneous basinal sediments of the Fingal Group (Lucan and Naul Formations) accumulated to the west of the Walterstown Fault and are much thicker than age-equivalent platform facies. Platform sedimentation ceased in latest Asbian to early Brigantian time with tectonically induced collapse and drowning of the platform; platform carbonates of the Mullaghfin Formation are onlapped northwards by coarse proximal basinal facies of the Loughshinny Formation. A distinct gravity anomaly in the Kentstown area suggests the presence of a granitoid body within the basement. The Kentstown Platform is therefore considered to have formed on a buoyant, granite-cored, footwall high analogous to the Askrigg and Alston Blocks of northern England.     

Evolution of the European Cenozoic Rift System: interaction of the Alpine and Pyrenean orogens with their foreland lithosphere

The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation.     

Stress-strain analysis of geogrid-supported liners over subsurface cavities

Summary Finite element analyses were conducted to investigate the magnitude of tensile strains imposed on landfill liners due to the formation of subsurface cavities. The study incorporated the significance of using geogrids to reduce the magnitude of strains and possibly the potential for collapse of landfill liners. Variations of key parameters included depth of overburden (D) and diameter of the cavity (B). Estimated stress distributions were compared to theoretical values obtained from a model reported in the literature. Results indicated that, contrary to conventional wisdom, the critical area based on the mechanics of arching was above the edge of the cavity where stress concentration occurred. Incorporation of geogrid reinforcement reduced the magnitude of tensile strains. The tensile force in the geogrid was dependent upon the size of the cavity, the depth of the overburden, and the applied pressure.     

曹妃甸老龙沟潮汐通道拦门沙演变机制

渤海湾曹妃甸老龙沟海区属于泻湖型潮汐通道体系,口门附近发育有大规模拦门沙浅滩。由于沿岸泥沙供给不足,近几十年来东坑坨等沙坝外侧海区整体呈侵蚀冲刷态势,等深线向陆蚀退。老龙沟西支深槽也以侵蚀作用为主,而拦门沙地区滩槽冲淤变化则与东坑坨演变密切相关。其中东槽冲刷发展主要是东坑坨西南尾端淤长压迫老龙沟口门,引起岬角效应增大、潮流动力增强所致,而西槽的摆动现象则主要与东槽发展所产生的挤压作用有关。由于泥沙供给不足,近年来东槽发展和西槽摆动的速度都有明显减缓。     

Recharging of contaminated aquifer with reclaimed sewage water

About 40% of the water supply of Cairo, Egypt, is drawn from a groundwater reservoir located southeast of the Nile Delta. Several thousand shallow wells supply drinking water to the farmers from the same groundwater reservoir, which is recharged by seepage from Ismailia canal, the irrigation canal network, and other wastewater lagoons in the same areas. Sewage water lagoons were located at the high ground of the area, recharging contaminated water into the aquifer. Since the groundwater in this area is used for drinking purposes, it was decided to treat the sewage water recharging the aquifer for health reasons. In this paper a solution to the problem is presented using an injection well recharging good quality water into the aquifer. A pumping well located at a distance downstream is used to pump the contaminated water out of the aquifer. A three-dimensional solute transport model was developed to study the concentration distribution with remediation time in the contaminated zone.     

Apport de la modélisation géophysique pour la compréhension de la structuration du pas de Calais

This study is based on an analysis of seismic, gravimetric and magnetic data to model the structure of the Dover Straits area. The Dover Straits are set in a transitional position within the Brabant para-autochthon, which lies between the Ardennes allochthon to the south and the Brabant Massif to the north. The seismic profiles show that this area is characterised by several superimposed Mesozoic basins, whose evolution has been controlled by the reactivation of Lower Palaeozoic faults. In common with the adjacent Weald–Wessex and southern North Sea basins, the Dover Straits area records a Jurassic extensional phase and a post-Cretaceous tectonic inversion. The geophysical modelling reveals the presence of a basement to these Mesozoic basins that exhibits Ordovician to Silurian structures, which cannot be detected on the seismic reflection profiles. In contrast to earlier interpretations, the modelling presented here suggests that the Brabant Massif continues southward beyond the Dover Straits and under the Brabant para-autochthon. Gravity data also provides evidence for the presence of granitic body at depth, in the vicinity of Km 27 on the seismic profile, which may have driven the uplift of the Silurian rocks in the area of the Straits. Similar granitic intrusions have been proposed to explain gravity anomalies along the Rhenohercynian Margin in Belgium, eastern and southern England. The geophysical modelling demonstrates the continuity of the basement and Mesozoic basin structures across the Dover Straits, suggesting a common geological evolution of the adjacent southern England–northern France regions. To cite this article: B. Minguely et al., C. R. Geoscience 337 (2005).     

岩溶地区现代土壤与洞穴石笋中单甲基支链烷烃与烷基环己烷对比研究

利用GC-MS（气相色谱—质谱仪）,对采自湖北清江流域和尚洞洞顶的土壤样品与洞内石笋样品进行分析,发现土壤中存在的七个系列单甲基支链烷烃在所有的石笋样品中均可以找到,呈现相似的分布模式,石笋中七个系列支链烷烃有可能来自洞穴滴水携带的土壤中的支链烷烃,但是也不能排除石笋原地生长的微生物的贡献。烷基环己烷的分布在土壤与石笋中呈现了相似的分布模式,但是主峰碳数有所变化,高碳数部分与低碳数部分的相对含量也发生了变化。主要原因可能是微生物选择性降解的结果,也有可能是土壤与石笋中微生物种类分布差异所造成的。本次研究初步显示了相对封闭稳定的洞穴沉积物与上覆土壤层中生物标志化合物的异同。      

A New Model for Sampling of Particulate Materials and Determination of the Minimum Sample Size

A novel model for the sampling of particulate materials is presented. In this model, the sampling error in concentration estimates due to the random packing of the particles in the batch is distributed according to the recently developed mass-based multinomial distribution. Using the model and assuming ideal sampling, a scheme to estimate the minimum sample mass is verified with computer simulation.     

东阿尔卑斯原-古特提斯构造演化

新生代阿尔卑斯是非洲和欧洲之间的陆陆碰撞造山带。强烈的造山作用使大量前中生代基底出露地表,尽管这些基底被强烈逆冲推覆和走滑叠置,但是仍保留较丰富的前中生代基底演化信息。结合近几年对东阿尔卑斯原-古特提斯的研究,本文梳理和重建了阿尔卑斯前中生代基底的构造格局,认为前阿尔卑斯基底受原特提斯、南华力西洋、古特提斯洋构造体系影响而经历了多期造山过程。新元古代-早古生代的原阿尔卑斯作为环冈瓦纳地块群的组成部分,受原特提斯洋俯冲的制约,是新元古-早古生代环冈瓦纳活动陆缘的组成部分,其中,海尔微-彭尼内基底组成外缘增生系统,包括卡多米期地壳碎片在内的陆缘弧/岛弧以及大量增生楔组成内缘增生系统。早奥陶世瑞亚克洋打开,随后原阿尔卑斯从冈瓦纳陆缘裂离,在泥盆纪-石炭纪受南华力西洋控制,海尔微-彭尼内-中、下奥地利阿尔卑斯从冈瓦纳分离。在早石炭世(维宪期)南阿尔卑斯(或与之相当的冈瓦纳源地块)与北部阿莫里卡地块群拼贴增生于古欧洲大陆南缘,共同组成华力西造山带(广义),华力西期缝合带保留在绍山-科尔山南侧。晚石炭世-早二叠世,阿尔卑斯受古特提斯洋的俯冲影响,在华力西造山带南侧形成安第斯山型活动大陆边缘,古特提斯洋在阿尔卑斯的演化至少持续到早三叠世,消亡遗迹保留在中奥地利阿尔卑斯基底的Plankogel杂岩中。     

具彩色斑纹颅形贝在广西桂林下石炭统黄金组中的发现:兼论颅形贝属的地质地理分布

文中描述了产自广西桂林地区下石炭统黄金组下部的颅形贝属一新种,桂林颅形贝(Cranaena guilinensis)。新种以平直的前结合缘和背壳上发育中槽为特征。在4枚标本上发现保存有放射状的彩色条带,表明该种当时生活在温暖海域的浅水环境。对该属70个种的地质地理分布和生物多样性变化的初步分析表明,该属可能起源于早泥盆世欧美大陆西北缘的老世界区,之后的地理分布和生物多样性发展以北美地区为中心,经历了中泥盆世—晚泥盆世早期和早石炭世2次比较明显的辐射演化、迁移扩散高峰和晚泥盆世晚期的1次严重衰退。第1次高峰是中泥盆世—晚泥盆世早期,该属的生物多样性达到巅峰,生物地理分布范围扩大到欧美大陆之外的西伯利亚板块、哈萨克斯坦板块和华南板块等;第2次高峰是早石炭世,该属的生物多样性虽不及前一次,但获得了最广泛的地理分布,不仅在北方大陆有分布,而且已进入到冈瓦纳大陆边缘。晚泥盆世晚期该属的1次严重衰退显然与F/F灭绝事件有关。早石炭世之后,该属进入衰退阶段,最终在二叠纪初灭绝。     

Concepts of blast hole pressure applied to blast design

Blast hole pressure is the starting point for many blast design calculations, but the way in which it is usually derived, from measured detonation velocity, indicates that more thought is needed as to its true meaning and implication. The general impression is given that the energy in the hole is defined by velocity of detonation (VoD), but this is rarely the case. VoD is defined by the energy released in the detonation driving zone between the shock front and the sonic (or CJ) surface, and for commercial explosives it is normal for reaction not to be complete within this zone. Reaction and energy delivery continues behind it, not reflected by VoD. Thus it would be more appropriate to use the theoretical VoD, not the measured VoD, to derive the starting pressure, since this would reflect the energy input of full reaction. In decoupled situations, the derivation of pressure at the blast hole wall using a polynomial decay concept is also of debatable value, and an alternative is offered.     

A new classification of the Turkish terranes and sutures and its implication for the paleotectonic history of the region

The Turkish part of the Tethyan realm is represented by a series of terranes juxtaposed through Alpine convergent movements and separated by complex suture zones. Different terranes can be defined and characterized by their dominant geological background. The Pontides domain represents a segment of the former active margin of Eurasia, where back-arc basins opened in the Triassic and separated the Sakarya terrane from neighbouring regions. Sakarya was re-accreted to Laurasia through the Balkanic mid-Cretaceous orogenic event that also affected the Rhodope and Strandja zones. The whole region from the Balkans to the Caucasus was then affected by a reversal of subduction and creation of a Late Cretaceous arc before collision with the Anatolian domain in the Eocene. If the Anatolian terrane underwent an evolution similar to Sakarya during the Late Paleozoic and Early Triassic times, both terranes had a diverging history during and after the Eo-Cimmerian collision. North of Sakarya, the Küre back-arc was closed during the Jurassic, whereas north of the Anatolian domain, the back-arc type oceans did not close before the Late Cretaceous. During the Cretaceous, both domains were affected by ophiolite obduction, but in very different ways: north directed diachronous Middle to Late Cretaceous mélange obduction on the Jurassic Sakarya passive margin; Senonian synchronous southward obduction on the Triassic passive margin of Anatolia. From this, it appears that the Izmir-Ankara suture, currently separating both terranes, is composite, and that the passive margin of Sakarya is not the conjugate margin of Anatolia. To the south, the Cimmerian Taurus domain together with the Beydağları domain (part of the larger Greater Apulian terrane), were detached from north Gondwana in the Permian during the opening of the Neotethys (East-Mediterranean basin). The drifting Cimmerian blocks entered into a soft collision with the Anatolian and related terranes in the Eo-Cimmerian orogenic phase (Late Triassic), thus suturing the Paleotethys. At that time, the Taurus plate developed foreland-type basins, filled with flysch-molasse deposits that locally overstepped the lower plate Taurus terrane and were deposited in the opening Neotethys to the south. These olistostromal deposits are characterized by pelagic Carboniferous and Permian material from the Paleotethys suture zone found in the Mersin mélange. The latter, as well as the Antalya and Mamonia domains are represented by a series of exotic units now found south of the main Taurus range. Part of the Mersin exotic material was clearly derived from the former north Anatolian passive margin (Huğlu-type series) and re-displaced during the Paleogene. This led us to propose a plate tectonic model where the Anatolian ophiolitic front is linked up with the Samail/Baër-Bassit obduction front found along the Arabian margin. The obduction front was indented by the Anatolian promontory whose eastern end was partially subducted. Continued slab roll-back of the Neotethys allowed Anatolian exotics to continue their course southwestward until their emplacement along the Taurus southern margin (Mersin) and up to the Beydağları promontory (Antaya-Mamonia) in the latest Cretaceous–Paleocene. The supra-subduction ocean opening at the back of the obduction front (Troodos-type Ocean) was finally closed by Eocene north–south shortening between Africa and Eurasia. This brought close to each other Cretaceous ophiolites derived from the north of Anatolia and those obducted on the Arabian promontory. The latter were sealed by a Maastrichtian platform, and locally never affected by Alpine tectonism, whereas those located on the eastern Anatolian plate are strongly deformed and metamorphosed, and affected by Eocene arc magmatism. These observations help to reconstruct the larger frame of the central Tethyan realm geodynamic evolution.     

Controls on the evolution and demise of Lower Carboniferous carbonate platforms,northern margin of the Dublin Basin,Ireland

Shallow water platform limestones of the Chadian–Asbian Milverton Group are restricted to the north-eastern part of the Lower Carboniferous (Dinantian) Dublin Basin. Here, they are confined to two granite-cored fault blocks, the Kentstown and Balbriggan Blocks, known to have been active during the late Dinantian. Three areas of platform sedimentation are delimited (the Kentstown, Drogheda and Milverton areas), although in reality they probably formed part of a single carbonate platform. Resedimented submarine breccias and calciturbidites (Fingal Group) composed of shallow water allochems and intraclasts sourced from the platform accumulated, along with terrigenous muds, in the surrounding basinal areas. Sedimentological evidence suggests that the Kentstown and Balbriggan Blocks possessed tilt-block geometries and developed during an episode of basin-wide extensional faulting in late Chadian time. Rotation of the blocks during extension resulted in the erosion of previously deposited sequences in footwall areas and concomitant drowning of distal hangingwall sequences. Antithetic faults on the northern part of the Balbriggan Block aided the preferential subsidence of the Drogheda area and accounts for the anomously thick sequence of late Chadian platform sediments present there. Continued subsidence and/or sea-level rise in the late Chadian–early Arundian resulted in transgression of the Kentstown and Balbriggan Blocks; carbonate ramps developed on the hangingwall dip slopes and transgressed southward with time. Subsequent progradation and aggradation of shallow water sediments throughout the Arundian to Asbian led to the development of carbonate shelves. Several coarse conglomeratic intervals within the contemporaneous basinal sequences of the Fingal Group attest to periodic increases of sediment influx associated with the development of the shelves. Sedimentological processes controlled the development of the carbonate platforms on the hangingwall dip slopes of the Kentstown and Balbriggan Blocks, though periodic increases of sediment flux into the basinal areas may have been triggered by eustatic falls in sea level. In contrast, differential subsidence along the bounding faults of these blocks exerted a strong control on the margins of the late Dinantian shelves, maintaining relatively steep slopes and inhibiting the progradation of the shelves into the adjacent basins. Tectonically induced collapse and retreat of the platform margins occurred in the late Asbian–early Brigantian. Platform sediments are overlain by coarse-grained proximal basinal facies which fine upwards before passing into a thick shale sequence, indicating that by the late Brigantian carbonate production had almost stopped as the platforms were drowned.     

古盐度对塔北隆起泥岩中粘土矿物组合和绿泥石成分的影响

粘土矿物组合和绿泥石成分常被用来讨论盆地沉积物的成岩作用和埋藏古温度。许多沉积盆地的研究结果显示,泥 岩和页岩中的粘土矿物组合和绿泥石的成分与埋藏深度/温度有关。但也见有例外的现象存在。文中主要探讨了新疆塔北隆 起泥岩中的粘土矿物组合和绿泥石成分的特征,以及与盆地古盐度的关系。研究结果表明：（1）在塔北隆起泥岩中,埋藏 深度2777.37~4604.41m,地层单位为J1-N2的粘土矿物组合为I+Chl和I+Chl+Ka; 埋藏深度5071.52~5299.37m,地层单位为 T1的粘土矿物组合为R0I/S+I+Chl和R0I/S+Chl。（2）研究区的成岩绿泥石为Ⅱb型铁镁绿泥石,其成分特征主要表现为： ①配位八面体中阳离子的占位数为11.532(总平均值);②ⅥAl含量明显大于ⅣAl含量;③（Fe+Mg）为4.016（总平均值）;④ Si/Al比值>1。（3）根据研究区盐类矿物的分布范围以及古盐度的数据,讨论了古盐度对该区粘土矿物组合和绿泥石成分的 影响,指出古盐度是影响本区粘土矿物组合和绿泥石成分变化的主要因素。用古盐度解释了<5000m深度的粘土矿物组合 中不含无序伊/蒙混层（R0I/S）矿物,而>5000m深度粘土矿物组合中含有无序伊/蒙混层（R0I/S）矿物的异常现象。揭示了 在一定的深度范围（2777.37~4405.27m）,一定的古盐度条件下（Sr/Ba比值≥0.4,并有盐类矿物出现）,绿泥石成分受到 古盐度的制约,并且随着古盐度的增高,绿泥石成分中的Al、ⅣAl、Na、Na2O、Al/Si随之增高,而Si/Al则随之降低。由 绿泥石成分温度计获得的温度值也伴随着古盐度的增高而增高。因此,由绿泥石成分温度计所计算的温度不能代表本区实 际埋藏的古温度。（4）研究区内绿泥石成分中的SiO2和FeO与母岩的对应成分之间有一定的相关性,其SiO2绿泥石与SiO2岩石、 FeO绿泥石与FeO岩石呈负相关的线性关系,并且这种关系在古盐度的干扰下也未受到影响。     

The effect of water on accessory phase solubility in subaluminous and peralkaline granitic melts

The solubilities of columbite, tantalite, wolframite, rutile, zircon and hafnon were determined as a function of the water contents in peralkaline and subaluminous granite melts. All experiments were conducted at 1035 °C and 2 kbar and the water contents of the melts ranged from nominally dry to approximately 6 wt.% H₂O. Accessory phase solubilities are not affected by the water content of the peralkaline melt. By contrast, solubilities are affected by the water content of the subaluminous melt, where the solubilities of all the accessory phases examined increase with the water content of the melt, up to 2 wt.% H₂O. At higher water contents, solubilities are nearly constant. It can be concluded that water is not an important control of accessory phase solubility, although the water content will affect diffusivities of components in the melt, thus whether or not accessory phases will be present as restite material. The solubility behaviour in the subaluminous and peralkaline melts supports previous spectroscopic studies, which have observed differences in the coordination of high field strength elements in dry vs. wet subaluminous granitic glasses, but not for peralkaline granitic glasses. Lastly, the fact that wolframite solubility increases with increasing water content in the subaluminous melt suggests that tungsten dissolved as a hexavalent species.