Estimation of river discharge from non-trapezoidal open channel using QuickBird-2 satellite imagery/Utilisation des images satellites de Quickbird-2 pour le calcul des débits fluviaux en chenaux ouverts non-trapézoïdaux

Abstract

Abstract River discharge is traditionally acquired by measuring water stage and then converting the water stage to discharge by using a stage–discharge rating curve. The possibility of monitoring river discharge by satellite has not been adequately studied hitherto, because of the difficulty in making sufficiently precise measurements of the water surface. Since the successful launch of commercial satellites with very-high-resolution sensors, it has become possible to derive ground information from satellite data. To determine river discharge in a non-trapezoidal open channel, an efficient approach has been developed that uses mainly satellite data. The method, which focuses on the measurement of surface water width coupled with river width–stage and ?remote? stage–discharge rating curves, was applied to the Yangtze River (Changjiang) and an accurate estimate of river discharge was obtained. The method can be regarded as ancillary to traditional field measurement methods or other remote sensing methods.     

Estimating river discharge from very high‐resolution satellite data: a case study in the Yangtze River,China

The measurement of river discharge is necessary for understanding many water‐related issues. Traditionally, river discharge is estimated by measuring water stage and converting the measurement to discharge by using a stage–discharge rating curve. Our proposed method for the first time couples the measurement of water‐surface width with river width–stage and stage–discharge rating curves by using very high‐resolution satellite data. We used it to estimate the discharge in the Yangtze (Changjiang) River as a case study. The discharges estimated at four stations from five QuickBird‐2 images matched the ground observation data very well, demonstrating that the proposed approach can be regarded as ancillary to traditional field measurement methods or other remote methods to estimate river discharge. Copyright © 2004 John Wiley & Sons, Ltd.     

Satellite Altimetry-Based Sea Level at Global and Regional Scales

Since the beginning of the 1990s, sea level is routinely measured using high-precision satellite altimetry. Over the past ~25 years, several groups worldwide involved in processing the satellite altimetry data regularly provide updates of sea level time series at global and regional scales. Here we present an ongoing effort supported by the European Space Agency (ESA) Climate Change Initiative Programme for improving the altimetry-based sea level products. Two main objectives characterize this enterprise: (1) to make use of ESA missions (ERS-1 and 2 and Envisat) in addition to the so-called ‘reference’ missions like TOPEX/Poseidon and the Jason series in the computation of the sea level time series, and (2) to improve all processing steps in order to meet the Global Climate Observing System (GCOS) accuracy requirements defined for a set of 50 Essential Climate Variables, sea level being one of them. We show that improved geophysical corrections, dedicated processing algorithms, reduction of instrumental bias and drifts, and careful linkage between missions led to improved sea level products. Regarding the long-term trend, the new global mean sea level record accuracy now approaches the GCOS requirements (of ~0.3 mm/year). Regional trend uncertainty has been reduced by a factor of ~2, but orbital and wet tropospheric corrections errors still prevent fully reaching the GCOS accuracy requirement. Similarly at the interannual time scale, the global mean sea level still displays 2–4 mm errors that are not yet fully understood. The recent launch of new altimetry missions (Sentinel-3, Jason-3) and the inclusion of data from currently flying missions (e.g., CryoSat, SARAL/AltiKa) may provide further improvements to this important climate record.     

Mapping mesoscale currents by optimal interpolation of satellite radiometer and altimeter data

 Mapping the mesoscale surface velocity stream function by combining estimates of surface height from satellite altimetry and surface currents from sequential infrared (sea-surface temperature) imagery using optimal interpolation is described. Surface currents are computed from infrared images by the method of maximum cross-correlations (MCC) and are combined with altimeter sea-level anomaly data from the TOPEX/Poseidon and ERS satellites. The analysis method was applied to 6 years of data from the East Australian Current region. The covariance of velocity and sea-level data is consistent with the statistical assumptions of homogeneous, isotropic turbulence, with typical length scales of order 220 km and time scales of 10 days in this region. Augmenting the analysis of altimeter data with MCC velocity observations improves the resolution of the surface currents, especially near the Australian coast, and demonstrates that the two data sources provide consistent and complementary observations of the surface mesoscale circulation. The volume of MCC data is comparable to that from a satellite altimeter, but with a more variable distribution of spatial and temporal resolution. In concert with altimetry, satellite radiometer velocimetry represents a technique useful for retrospective analysis of currents from high-resolution satellite radiometer data-sets. Received: 3 July 2001 / Accepted: 16 November 2001     

Modeling the water resources of the Black and Mediterranean Sea river basins and their impact on regional mass changes

For the first time, a dedicated release of the hydrology and water use model WaterGAP3, has been developed to spatially explicit calculate hydrological fluxes within river basins draining into the Mediterranean and Black Sea. The main differences between the new regional version of the global WaterGAP3 model and the previously applied global version WaterGAP2 can be found in the spatial resolution, snow modeling, and water use modeling. Comparison with observations shows that WaterGAP3 features a more realistic representation of modeled river runoff and inflow into both seas. WaterGAP3 generates more inflow to both seas than WaterGAP2. In the WaterGAP3 simulation, contributions to the total runoff into the Black Sea from individual discharge regions show in general a good agreement to climatology derived runoff, but lesser importance of Georgian rivers for the basin's water. After the successful model validation WaterGAP3 has been applied to correct estimates of seawater mass derived from the GRACE gravity mission and to account for freshwater inflow into both basins. The performance of the WaterGAP3 regional solution has been evaluated by comparing the seawater mass derived from GRACE corrected for the leakage of continental hydrology, to an independent estimate derived from steric-corrected satellite altimetry with steric correction from regional oceanographic models. The agreement is higher in the Mediterranean Sea than in the Black Sea. Results using WaterGAP3 and WaterGAP2 are not significantly different. However the agreement with the altimetry-derived results is higher using WaterGAP2, due to the smaller annual amplitude of the continental hydrology leakage from WaterGAP3. We conclude that the regional model WaterGAP3 is capable of realistically quantifying water mass variation in the region, further developments have been identified.     

Sea Surface Salinity Observations from Space with the SMOS Satellite: A New Means to Monitor the Marine Branch of the Water Cycle

While it is well known that the ocean is one of the most important component of the climate system, with a heat capacity 1,100 times greater than the atmosphere, the ocean is also the primary reservoir for freshwater transport to the atmosphere and largest component of the global water cycle. Two new satellite sensors, the ESA Soil Moisture and Ocean Salinity (SMOS) and the NASA Aquarius SAC-D missions, are now providing the first space-borne measurements of the sea surface salinity (SSS). In this paper, we present examples demonstrating how SMOS-derived SSS data are being used to better characterize key land–ocean and atmosphere–ocean interaction processes that occur within the marine hydrological cycle. In particular, SMOS with its ocean mapping capability provides observations across the world’s largest tropical ocean fresh pool regions, and we discuss from intraseasonal to interannual precipitation impacts as well as large-scale river runoff from the Amazon–Orinoco and Congo rivers and its offshore advection. Synergistic multi-satellite analyses of these new surface salinity data sets combined with sea surface temperature, dynamical height and currents from altimetry, surface wind, ocean color, rainfall estimates, and in situ observations are shown to yield new freshwater budget insight. Finally, SSS observations from the SMOS and Aquarius/SAC-D sensors are combined to examine the response of the upper ocean to tropical cyclone passage including the potential role that a freshwater-induced upper ocean barrier layer may play in modulating surface cooling and enthalpy flux in tropical cyclone track regions.     

Scales and magnitude of hyporheic,river–aquifer and bank storage exchange fluxes

Many studies have investigated the exchange processes that occur between rivers and groundwater systems and have successfully quantified the water fluxes involved. Specifically, these exchange processes include hyporheic exchange, river–aquifer exchange (groundwater discharge and river loss) and bank storage exchange. Remarkably, there are relatively few examples of field studies where more than one exchange process is quantified, and as a consequence, the relationships between them are not well understood. To compare the relative magnitudes of these common exchange processes, we have collected data from 54 studies that have quantified one or more of these exchange flux types. Each flux value is plotted against river discharge at the time of measurement to allow the different exchange flux types to be compared. We show that there are positive relationships between the magnitude of each exchange flux type and increasing river discharge across the different studies. For every one order of magnitude increase in river discharge, the hyporheic, river–aquifer and bank storage exchange fluxes increase by factors of 2.7, 2.9 and 2.5, respectively. On average, hyporheic exchange fluxes are almost an order of magnitude greater than river–aquifer exchange fluxes, which are, in turn, approximately four times greater than bank storage exchange fluxes for the same river discharge. Unless measurement approaches that can distinguish between different types of exchange flux are used, there is potential for hyporheic exchange fluxes to be misinterpreted as river–aquifer exchange fluxes, with possible implications for water resource management decisions. Copyright © 2015 John Wiley & Sons, Ltd.     

Seasonal,tidal, and geomorphic controls on sediment export to Amazon River tidal floodplains

Mainstem–floodplain material exchange in the tidal freshwater reach of major rivers may lead to significant sequestration of riverine sediment, but this zone remains understudied compared to adjacent fluvial and marine environments. This knowledge gap prompts investigation of floodplain-incising tidal channels found along the banks of tidal rivers and their role in facilitating water and suspended-sediment fluxes between mainstem and floodplain. To evaluate this role, and how it evolves along the tidal river and with time, we measured water level, flow velocity, temperature, and suspended-sediment concentration (SSC) in four tidal channels along the tidal Amazon River, Brazil. Eleven deployments were made during low, rising, high, and falling seasonal Amazon discharge. Generally, channels export high-SSC water from the mainstem to the tidal floodplain on flood tides and transfer low-SSC water back to the mainstem on ebbs. Along the length of the tidal river, the interaction between tidal and seasonal water-level variations and channel–floodplain morphology is a primary control on tidal-channel sediment dynamics. Close to the river mouth, where tides are large, this interaction produces transient flow features and current-induced sediment resuspension, but the importance of these processes decreases with distance upstream. Although the magnitude of the exchange of water and sediment between mainstem and floodplain via tidal channels is a small percentage of the total mainstem discharge in this large tidal-river system, tidal channels are important conduits for material flux between these two environments. This flux is critical to resisting floodplain submergence during times of rising sea level. © 2019 John Wiley & Sons, Ltd.     

Sediment export from French rivers to the sea

Knowledge of sediment exports from continental areas is essential for estimating denudation rates and biogeochemical cycles. However, the estimation of current sediment fluxes to the sea is often limited by the availability and quality of sediment discharge data. This study aims to quantify the relative contributions of French rivers to the sediment discharge to the ocean. Sediment fluxes were assessed using the French river quality database, which is characterized by a low temporal resolution but long‐term measurement periods. An improved rating curve approach (IRCA) using daily discharge data, which allows the estimation of mean annual sediment loads from infrequent sediment concentration data, was used to calculate sediment fluxes. The resulting mean annual sediment loads show that French rivers export c. 16.21 Mt yr^‐1 of sediments to the sea. Among the 88 defined French rivers flowing to the sea, the four largest basins (Loire, Rhone, Garonne and Seine) export 13.2 Mt yr^‐1, which corresponds to 81.3% of total exports. No relationship was found between the mass of exported sediment and the size of the drainage basins. This is due to the variety of river basin typologies among these rivers, including lowland rivers in temperate climates, such as the Seine on the one hand and rivers draining mountainous areas in Alpine/Mediterranean areas on the other hand, such as the Rhone. The latter contributes 60% to the total sediment export for France while its drainage area is only 19% of the total area considered. Differences between the river basins considered are also shown by temporal indicators describing the duration of the exports, which may be linked with sediment production processes over drained areas. Copyright © 2012 John Wiley & Sons, Ltd.     

Hydraulic visibility: Using satellite altimetry to parameterize a hydraulic model of an ungauged reach of a braided river

What hydraulic information can be gained from remotely sensed observations of a river's surface? In this study, we analyze the relationship between river bed undulations and water surfaces for an ungauged reach of the Xingu River, a first‐order tributary of the Amazon river. This braided reach is crosscut more than 10 times by a ENVISAT (ENVironmental SATellite) track that extends over 100 km. Rating curves based on a modeled discharge series and altimetric measurements are used, including the zero‐flow depth Z ₀ parameter, which describes river's bathymetry. River widths are determined from JERS (Japanese Earth Ressources Satellite) images. Hydrodynamic laws predict that irregularities in the geometry of a river bed produce spatial and temporal variations in the water level, as well as in its slope. Observation of these changes is a goal of the Surface Water and Ocean Topography satellite mission, which has a final objective of determining river discharge. First, the concept of hydraulic visibility is introduced, and the seasonality of water surface slope is highlighted along with different flow regimes and reach behaviors. Then, we propose a new single‐thread effective hydraulic approach for modeling braided rivers flows, based on the observation scales of current satellite altimetry. The effective hydraulic model is able to reproduce water surface elevations derived by satellite altimetry, and it shows that hydrodynamical signatures are more visible in areas where the river bed morphology varies significantly and for reaches with strong downstream control. The results of this study suggest that longitudinal variations of the slope might be an interesting criteria for the analysis of river segmentation into elementary reaches for the Surface Water Ocean Topography mission that will provide continuous measurements of the water surface elevations, the slopes, and the reach widths.     

Accuracy assessments of recent earth gravity models using crossover altimetry

Summary The calibrated variance-covariance matrices of the harmonic geopotential coefficients of the recent combined model JGM 2 has been tested and verified by independent crossover altimetry from TOPEX/Poseidon and ERS 1 using the Latitude Lumped Coefficients in the southern oceans area. Although orbits are not yet available for these missions with other recent models for which error matrices have been released, by comparison with JGM 2 results and field differences we also confirm that the error matrices for the satellite model GRIM 4S4p and the combined data model JGM 3 are also generally valid. Projections of these matrices for a variety of inclinations show that many unused orbits of even moderate altitude (≈ 800 km) will still yield trajectory crossover errors at a level of many tens of centimeters even with the latest orbitgeopotential models.     

Prediction of depth‐integrated fluxes of suspended sediment in the Amazon River: particle aggregation as a complicating factor

Large rivers have been previously shown to be vertically heterogeneous in terms of suspended particulate matter (SPM) concentration, as a result of sorting of suspended solids. Therefore, the spatial distribution of suspended sediments within the river section has to be known to assess the riverine sedimentary flux. Numerous studies have focused on the vertical distribution of SPM in a river channel from a theoretical or experimental perspective, but only a few were conducted so far on very large rivers. Moreover, a technique for the prediction of depth‐integrated suspended sediment fluxes in very large rivers based on sediment transport dynamics has not yet been proposed. We sampled river water along depth following several vertical profiles, at four locations on the Amazon River and its main tributaries and at two distinct water stages. Depending on the vertical profile, a one‐ to fivefold increase in SPM concentration is observed from river channel surface to bottom, which has a significant impact on the ‘depth‐averaged’ SPM concentration. For each cross section, a so‐called Rouse profile quantitatively accounts for the trend of SPM concentration increase with depth, and a representative Rouse number can be measured for each cross section. However, the prediction of this Rouse number would require the knowledge of the settling velocity of particles, which is dependent on the state of aggregation affecting particles within the river. We demonstrate that in the Amazon River, particle aggregation significantly influences the Rouse number and renders its determination impossible from grain‐size distribution data obtained in the lab. However, in each cross section, the Rouse profile obtained from the fit of the data can serve as a basis to model, at first order, the SPM concentration at any position in the river cross section. This approach, combined with acoustic Doppler current profiler (ADCP) water velocity transects, allows us to accurately estimate the depth‐integrated instantaneous sediment flux. Copyright © 2010 John Wiley & Sons, Ltd.     

2009年环太湖入出湖河流水量及污染负荷通量

通过对2009年环太湖水文巡测及同步水质监测数据整理,得到2009年环太湖河流入出湖水量以及污染负荷,并将之与前期文献资料数据进行对比.结果表明,2009年环太湖河道入出湖水量分别为88.40×108 m3、93.27×108m3.入湖水量超过5×108m3的依次为陈东港、大浦港、梁溪河、太滆运河、望虞河.出湖水量最大...     

Producing time series of river water height by means of satellite radar altimetry—a comparative study

Abstract

Satellite radar altimetry is complementary to in situ limnimetric surveys as a means of estimating the water height of large rivers, lakes and flood plains. Production of water height time series by satellite radar altimetry technology requires first the selection of radar ground target locations corresponding to water body surfaces under study, i.e. the definition of “virtual limnimetric stations”. We propose to investigate qualitative and quantitative differences between three representative virtual station creation methodologies: (a) a fully manual method, (b) a semi-automatic method based on a land cover characterization that allows the water body surface under study to be located; and (c) an original fully automatic procedure that exploits a digital elevation model and an estimation of the river width. The results yielded by these three methods are comparable: maximum absolute magnitudes of water height differences being 0.46, 0.26 and 0.15 m for, respectively, 95, 90 and 80% of the water height values obtained. Moreover, more than 67% and 92% of time series jointly produced by the methods present root mean square differences lower than 20 and 50 cm, respectively. The results show that the fully automatic method developed herein provides as reliable results as the fully manual one. This opens the way to use of satellite radar altimetry for the generation of water height time series on a large scale, and considerably extends the applicability of satellite radar altimetry in hydrology.

Citation Roux, E., Santos da Silva, J., Vieira Getirana, A. C., Bonnet, M.-P., Calmant, S., Martinez, J.-M. & Seyler, F. (2010) Producing time series of river water height by means of satellite radar altimetry—comparative study. Hydrol. Sci. J. 55(1), 104–120.     

A joint analysis of river runoff and meteorological forcing in the Karakoram,upper Indus Basin

Satellite‐geodetic altimetry investigations in the Karakoram have indicated slight mass gain or loss of the glaciers during the early part of 21st century. Equivalent discharge in the upper Indus Basin due to these mass changes has been estimated at 5 to 10% of mean annual flow. However, satellite altimetry and geodetic glacier mass estimates in the extreme topography of the Karakoram have not yet been counter‐validated by hydrological analysis. Therefore, we present a first cross validation of three to five decades of river flow data from the three major watersheds in the Karakoram, with matching series of monthly precipitation, temperature, and evaporation provided by six atmospheric reanalysis products for 1979–2014. The analyses suggest that in most cases river flows have been increasing steadily from the end of the 1960s and 1970s to the middle of the 1990s and have stabilized or are in decline since then. Hunza watershed in Karakoram West shows consistently declining flows over the first half of the analysis period and stable flows during the second half for most of the summer melting season, suggesting mass accumulation. Rising river flows in the Shyok and Shigar watersheds, followed by stabilizing or slightly declining flows from 1995 onward, can be explained by consistently increasing precipitation during the first half of the analysis period, and successive stabilization or minor decline thereof. Flow data do not necessarily suggest considerable loss or gain of glacial mass in the Karakoram during the late 90s and early 2000s as suggested by satellite‐based altimetry studies.     

Modelling stage–discharge relationships in anastomosed bedrock-influenced sections of the Sabie River system

Flow dynamics in a bedrock-influenced river system, the Sabie River, South Africa, have been found to be significantly different from those in temperate alluvial systems. The lack of lateral water connectivity leads to multiple bedrock distributaries with varying water surface elevations across a cross-section. Distributary activation is dependent on upstream breaching of bedrock barriers between distributaries by rising discharge. Where measurement of individual stage–discharge relationships in each distributary was not possible, a ‘Multiple Stage’ model was developed to predict hydraulic conditions in each distributary, using a single measured rating curve and knowledge of individual distributary water surface elevations at a low flow. Use of the ‘Multiple Stage’ model has enabled realistic prediction of channel geometry and hydraulic variables, that accounts for the different stages found in bedrock-influenced sections, yet is not prohibitively data intensive. Predicted ‘Multiple Stage’ results for maximum depth and velocity demonstrate the vast improvement on modelling flow dynamics, when compared to the conventional assumption of a single stage representing the whole cross-section. © 1998 John Wiley & Sons, Ltd.     

Daily discharge estimation at ungauged river sites using remote sensing

A methodology is developed to estimate daily river discharge at an ungauged site using remote sensing data. Use is made of ERS‐2 and ENVISAT satellite altimetry to provide a time series of river channel stage levels and longitudinal channel slope and Landsat satellite imagery to provide a range of channel widths over a 50 km reach of river. The data are substituted into the Bjerklie et al. ( 2003 ) equation, which is based on the Manning's resistance equation and has been developed using a global database of channel hydraulic information and discharge measurements. Our methodology has been applied at three locations on the Mekong and Ob Rivers and validated against daily in situ discharge measurements. The results show Nash–Sutcliffe efficiency values of 0.90 at Nakhon Phanom and 0.86 at Vientiane on the Mekong, and 0.86 at Kalpashevo on the Ob. Copyright © 2012 John Wiley & Sons, Ltd.     

Estimating Runoff Using Hydro-Geodetic Approaches

Given the continuous decline in global runoff data availability over the past decades, alternative approaches for runoff determination are gaining importance. When aiming for global scale runoff at a sufficient temporal resolution and with homogeneous accuracy, the choice to use spaceborne sensors is only a logical step. In this respect, we take water storage changes from Gravity Recovery And Climate Explorer (grace) results and water level measurements from satellite altimetry, and present a comprehensive assessment of five different approaches for river runoff estimation: hydrological balance equation, hydro-meteorological balance equation, satellite altimetry with quantile function-based stage–discharge relationships, a rudimentary instantaneous runoff–precipitation relationship, and a runoff–storage relationship that takes time lag into account. As a common property, these approaches do not rely on hydrological modeling; they are either purely data driven or make additional use of atmospheric reanalyses. Further, these methods, except runoff–precipitation ratio, use geodetic observables as one of their inputs and, therefore, they are termed hydro-geodetic approaches. The runoff prediction skill of these approaches is validated against in situ runoff and compared to hydrological model predictions. Our results show that catchment-specific methods (altimetry and runoff–storage relationship) clearly outperform the global methods (hydrological and hydro-meteorological approaches) in the six study regions we considered. The global methods have the potential to provide runoff over all landmasses, which implies gauged and ungauged basins alike, but are still limited due to inconsistencies in the global hydrological and hydro-meteorological datasets that they use.     

Enhanced hysteresis of suspended sediment transport in response to upstream damming: An example of the middle Yangtze River downstream of the Three Gorges Dam

The peak in sediment transport in alluvial rivers generally lags behind the peak in discharge. It is thus not clear how the hysteresis in the sediment/discharge relationship may be impacted by damming, which can fundamentally alter the water and sediment regimes in the downstream reaches of the river. In this study, a total of 500 flood events in the Yichang–Chenglingji Reach (YCR) of the Middle Yangtze River immediately downstream of the Three Gorges Dam (TGD) are analysed to study the impacts of dam operations on the hysteresis of suspended sediment transport. Sediment rating curves, hysteresis patterns, as well as lag times, are investigated to determine the relationship between suspended sediment concentration (SSC) and flow discharge (Q) at different temporal scales, from inter-annual to individual flood events, for the pre- and post-TGD period from 1992 to 2002 and from 2003 to 2017, respectively. The results showed that the TGD operation decreased the frequency and magnitude of floods. The decrease in peak flow and increase in base flow weakened the flood contribution to the annual discharge by nearly 20%. However, the relative suspended sediment load contribution during flood events was much higher than the discharge contribution, and was little impacted by the dam. At seasonal and monthly scales, more than 80% of the suspended sediment was transported by ~65% of the water discharge in the summer and early autumn. The monthly SSC–Q relationship changed from a figure-eight to an anti-clockwise pattern after the construction of the TGD. For single flood events, the TGD operations significantly modified the downstream SSC–Q hysteresis patterns, increasing the frequency of anti-clockwise loops and the lag time between peak Q and peak SSC. These adjustments were mainly caused by differences in the propagation velocities of flood and sediment waves and the sediment ‘storage–mobilization–depletion’ process, whereas the influence of lateral diversions was small. © 2020 John Wiley & Sons, Ltd.     

Spatial and temporal patterns of stable water isotopes along the Yangtze River during two drought years

Changes in the level of the Yangtze River caused by anthropogenic water regulation have major effects on the hydrological processes and water cycle in surrounding lakes and rivers. In this study, we obtained isotopic evidence of changes in the water cycle of Yangtze River during the two drought years of 2006 and 2013. Isotopic evidence demonstrated that the δ¹⁸O and δD levels in Yangtze River exhibited high spatial heterogeneity from the upper to lower reaches, which were controlled by atmospheric precipitation, tributary/lake water mixing, damming regulation, and water temperature. Both the slope and intercept of Yangtze River evaporative line (δD = 7.88 δ¹⁸O + 7.96) were slightly higher than those of local meteoric water line of Yangtze River catchment (δD = 7.41 δ¹⁸O + 6.01). Most of the river isotopic values were located below the local meteoric water line, thereby implying that the Yangtze River water experienced a certain degree of evaporative enrichment on isotopic compositions of river water. The high fluctuations in the isotopic composition (e.g., deuterium excess [d‐excess]) in the middle to lower reaches during the initial stage of operation for the Three Gorges Dams (2003–2006) were due to heterogeneous isotopic signatures from the upstream water. In contrast to the normal stage (after 2010) characterized by the maximum water level and largest water storage, a relatively small variability in the deuterium excess was found along the middle to lower reaches because of the homogenization of reservoir water with a longer residence time and complete mixing. The effects of water from lakes and tributaries on the isotopic compositions in mainstream water were highlighted because of the high contributions of lakes water (e.g., Dongting Lake and Poyang Lake) efflux to the Yangtze River mainstream, which ranged from 21% to 85% during 2006 and 2013. These findings suggest that the retention and regulation of the Three Gorges Dams has greatly buffered the isotopic variability of the water cycle in the Yangtze catchment, thereby improving our understanding of the complex lake–river interactions along the middle to lower reaches in the future.