Using non-conservative tracers to characterise karstification processes in the Merinos-Colorado-Carrasco carbonate aquifer system (southern Spain)

The systematic sampling of the chemical composition of the groundwater from five karst springs (including an overflow spring) and one outflowing borehole have permitted to determine distinctive chemical changes in the waters that reflect the geochemical processes occurring in a carbonate aquifer system from southern Spain. The analysis of the dissolution parameters revealed that geochemical evolution of the karst waters basically depends on the availability of the minerals forming aquifer rocks and the residence time within the aquifers. In the three proposed scenarios in the aquifers, which include the preferential flow routines, the more important geochemical processes taking place during the groundwater flow from the recharge to the discharge zones are: CO₂ dissolution and exsolution (outgassing), calcite net dissolution, calcite and dolomite sequential dissolution, gypsum/anhydrite and halite dissolution, de-dolomitization and calcite precipitation. A detailed analysis of the hydrochemical data set, saturation indices of the minerals and partial pressure of CO₂ in the waters joined to the application of geochemical modelling methods allowed the elaboration of a hydrogeochemical model of the studied aquifers. The developed approach contributes to a better understanding of the karstification processes and the hydrogeological functioning of carbonate aquifers, the latter being a crucial aspect for the suitable management of the water resources.     

Hydrogeochemistry of groundwater and anthropogenic control over dolomitization reactions in alluvial sediments of the Deoria district: Ganga plain,India

Groundwater is a critical resource in Deoria district, as it is the main source of drinking water and irrigation. The aquifer has deteriorated to a high degree, during the last two to three decades, in quality and quantity due to high population growth and environmental pollution. More than 90% of the population get their drinking water from subsurface waters. Fifteen wells were sampled in June 2006 to probe the hydrogeochemical components that influence the water quality. The results show that groundwater have EC, TDS, Na⁺, Mg²⁺, HCO₃⁻ and TH higher than the WHO, 1997 maximum desirable limits. A hydrogeochemical numerical model for carbonate minerals was constructed using the PHREEQC package. The regression analysis shows that there are three groups of elements which are significantly and positively correlated. The main hydrochemical facies of the aquifer (Ca + Mg–HCO₃) represents 33.33% of the total wells. The geochemical modeling demonstrated that the reactions responsible for the hydrochemical evolution in the area fall into three categories: (1) dissolution of salts, (2) precipitation of dolomite, (3) ion exchange. Solubility of dolomite, calcite, aragonite and gypsum were assessed in terms of the saturation index. The thermodynamic prerequisites for dolomite supersaturation reactions are satisfied by subsurface waters, since they are supersaturated with respect to dolomite, undersaturated (or in equilibrium) with respect to calcite, and undersaturated with respect to gypsum. The Ca²⁺ versus SO₄²⁻ and Mg²⁺ versus SO₄²⁻ trends are also compatible with homologous trends resulting from dolomite supersaturation.     

On the Direction and Magnitude of Oxygen Isotope Fractionation Between Calcite and Aragonite at Thermodynamic Equilibrium

Oxygen isotope fractionation factors between calcium carbonates and water have been applied to ancient marine geochemistry principally for the purpose of geothermometry. The problem was encountered, however, with respect to the direction and magnitude of oxygen isotope fractionation between calcite and aragonite at thermodynamic equilibrium. This basically involves sound understanding of both thermodynamics and kinetics of oxygen isotope fractionation between inorganically precipitated carbonate and water at low temperatures. Thus the crucial issues are to acknowledge the processes of chemical reaction and isotopic exchange during precipitation of CaCO₃ minerals in solution, the kinetic mechanism of isotope equilibrium or disequilibrium, the effect of polymorphic transition from metastable aragonite to stable calcite under hydrous or anhydrous conditions, and the presence or absence of isotope salt effect on oxygen isotope exchange between carbonate and water in response to the hydrous or anhydrous conditions at thermodynamic equilibrium. Because good agreements exist in carbonate–water oxygen isotope fractionation factors between theoretical calculations and experimental determinations, it is encouraging to applying the thermodynamic and kinetic data to isotopic paleothermometry and geochemical tracing.     

Hydrogeochemical Analysis of Processes Through Modeling of Seawater Intrusion Impacts in Biscayne Aquifer Water Quality,USA

Hydrogeochemical processes that accompany seawater intrusion in coastal aquifers can alter the resulting water quality and are important ingredients in coastal aquifer management. The presence of dissolution–precipitation reactions and ion exchange in the mixing zone of the Biscayne aquifer (FL, USA) are suggested based on changes in major ion concentrations and mineral saturation indices (SI). Major ion concentrations from 11 groundwater samples are compared with theoretical mixing between freshwater and seawater. PHREEQC code was used to calculate saturation indices of the samples with respect to common phases in the Biscayne aquifer. High Ca²⁺ and HCO₃ ^? content of the samples is typical of waters in contact with carbonate aquifers. Water quality of the samples is mainly attributed to mixing and precipitation–dissolution reactions with calcite and dolomite. The samples were saturated with calcite (SI ~ 0) and undersaturated for dolomite (SI < 0), while a few samples showed dolomite saturation. Because gypsum and halite SI could be predicted by theoretical mixing, reactions with those minerals, if present, are thought to be insignificant. In the active intrusion areas, cation exchange also appears to modify water quality leading to excess Ca²⁺, but depleted Na⁺, Mg²⁺ and K⁺ concentrations. On the other hand, samples from previous intrusion areas plotted very close to the theoretical mixing line and approached equilibrium with the seawater.     

Salinity reflux and dolomitization of southern Australian slope sediments: the importance of low carbonate saturation levels

Anomalously saline waters in Ocean Drilling Program Holes 1127, 1129, 1130, 1131 and 1132, which penetrate southern Australian slope sediments, and isotopic analyses of large benthic foraminifera from southern Australian continental shelf sediments, indicate that Pleistocene–Holocene meso‐haline salinity reflux is occurring along the southern Australian margin. Ongoing dolomite formation is observed in slope sediments associated with marine waters commonly exceeding 50‰ salinity. A well‐flushed zone at the top of all holes contains pore waters with normal marine trace element contents, alkalinities and pH values. Dolomite precipitation occurs directly below the well‐flushed zone in two phases. Phase 1 is a nucleation stage associated with waters of relatively low pH (ca 7) caused by oxidation of H₂S diffusing upward from below. This dolomite precipitates in sediments < 80 m below the sea floor and has δ¹³C values consistent with having formed from normal sea water (? 1‰ to + 1‰ Vienna Pee Dee Belemnite). The Sr content of Phase 1 dolomite indicates that precipitation can occur prior to substantial metastable carbonate dissolution (< 300 ppm in Holes 1129 and 1127). Dolomite nucleation is interpreted to occur because the system is undersaturated with respect to the less stable minerals aragonite and Mg‐calcite, which form more readily in normal ocean water. Phase 2 is a growth stage associated with the dissolution of metastable carbonate in the acidified sea water. Analysis of large dolomite rhombs demonstrates that at depths > 80 m below the sea floor, Phase 2 dolomite grows on dolomite cores precipitated during Phase 1. Phase 2 dolomite has δ¹³C values similar to those of the surrounding bulk carbonate and high Sr values relative to Phase 1 dolomite, consistent with having formed in waters affected by aragonite and calcite dissolution. The nucleation stage in this model (Phase 1) challenges the more commonly accepted paradigm that inhibition of dolomitization by sea water is overcome by effectively increasing the saturation state of dolomite in sea water.     

Formation of low‐magnesium calcite at cold seeps in an aragonite sea

This study investigates the conditions of occurrence and petrographic characteristics of low‐Mg calcite (LMC) from cold seeps of the Gulf of Mexico at a water depth of 2340 m. Such LMC mineral phases should precipitate in calcite seas rather than today's aragonite sea. The ¹³C‐depleted carbonates formed as a consequence of anaerobic oxidation of hydrocarbons in shallow subsurface cold seep environments. The occurrence of LMC may result from brine fluid flows. Brines are relatively Ca²⁺‐enriched and Mg²⁺‐depleted (Mg/Ca mole ratio <0.7) relative to seawater, where the Mg/Ca mole ratio is ~5, which drives high‐Mg calcite and aragonite precipitation. The dissolution of aragonitic mollusk shells, grains and cements was observed. Aerobic oxidation of hydrocarbons and H₂S is the most likely mechanism to explain carbonate dissolution. These findings have important implications for understanding the occurrence of LMC in deep water marine settings and consequently their counterparts in the geological record.     

Hydrogeochemical factors effecting the scaling problem in Balçova geothermal field,İzmir, Turkey

Reservoir fluid compositions have been assessed from analytical data on water samples collected from thermal and cold waters in Balçova geothermal field. The results of mineral equilibrium modelling indicate that the waters, with some exceptions, are systematically supersaturated with respect to calcite, aragonite, dolomite, chalcedony and quartz, but undersaturated with respect to amorphous silica, celestite, anhydrite and gypsum and undersaturated or supersaturated with respect to barite, low-albite, K-feldspar, gibbsite and Fe(OH)₃(a). Calculation of mineral saturation states and geochemical analyses of scale and field observations show that carbonate minerals (calcite, aragonite and dolomite) are most likely to be precipitated as a scale type. Besides carbonates, scale formation risk of amorphous silica, Fe(OH)₃(a), anhydrite, barite and celestite minerals should be taken into account in some wells and surface equipment. Most of the waters, with some exceptions, have carbonate scaling risk at all temperatures, whereas the other scaling risks only exist over a limited temperature range. While silica, Fe(OH)₃(a) and barite show a scaling tendency at low temperatures, anhydrite and celestite scaling occurs at higher temperatures.     

Major-ion chemistry, ��13C and 87Sr/86Sr as indicators of hydrochemical evolution and sources of salinity in groundwater in the Yuncheng Basin, China

Processes controlling hydrogeochemistry in the Yuncheng Basin, China, were characterised using major-ion chemistry, ⁸⁷Sr/⁸⁶Sr ratios and ??¹³C values. Evapotranspiration during recharge increased solute concentrations by factors of ??5?C50 in deep palaeowaters, while higher degrees of evapotranspiration have occurred in shallow, modern groundwater. Aquifer sediments (loess) contain approximately 15 weight% calcite; trends in groundwater HCO₃ concentrations and ??¹³C values (ranging from ?16.4 to ?8.2??) indicate that carbonate weathering is a significant source of DIC. Groundwater ⁸⁷Sr/⁸⁶Sr ratios (0.7110?C0.7162, median of 0.7116) are similar to those in both loess carbonate (0.7109?C0.7116) and local rainfall (0.7112), and are significantly lower than Sr in aquifer silicates (0.7184?C0.7251). Despite evidence for substantial carbonate dissolution, groundwater is generally Ca-poor (<?10% of total cations) and Na-rich, due to cation exchange. Saturation with respect to carbonate minerals occurs during or soon after recharge (all calcite and dolomite saturation indices are positive). Subsequent carbonate dissolution in the deep aquifer must occur as a second-stage process, in response to Ca loss (by ion exchange) and/or via incongruent dissolution of dolomite and impure calcite. The latter is consistent with positive correlations between ??¹³C values and Mg/Ca and Sr/Ca ratios (r ²?=?0.32 and 0.34).     

Hydrogeochemistry and geochemical simulations to assess water–rock interactions in complex carbonate aquifers: The case of Aguadulce (SE Spain)

The hydrogeological unit of Aguadulce (Campo de Dalías aquifers, SE Spain) has a complex geometry. This fact, together with a continuous rise in water demand due to intensive agriculture and tourism create problems for groundwater quantity and quality. In this paper classic geochemical tools managed by means of GIS software and geochemical simulations are combined to delineate, identify and locate the possible physicochemical processes acting in the Aguadulce groundwater. Two main aquifers can be distinguished: the carbonate or lower aquifer of Triassic age, and the calcodetritic or upper aquifer of Plio-Quaternary age. Groundwaters from the latter are more saline and, assuming all chlorinity originates from seawater intrusion, the seawater contribution to their composition would be up to 7%. Nevertheless the carbonate aquifer appears not to be homogeneous: it is compartmentalised into 4 zones where different processes explain the different groundwaters compositions. Zone 4 samples (E margin of the carbonate aquifer) resemble those of the Plio-Quaternary aquifer, where calcite precipitation, dolomite and gypsum dissolution and some cation exchange (water–rock interaction) together with seawater–freshwater mixing occur. In contrast, water–rock interaction predominates in zones 1 and 3 of the carbonate aquifer. Moreover, zone 2 samples, located between zones 1 and 3, are explained by water–rock interaction in addition to mixing with Plio-Quaternary aquifer waters. The combination of geochemical simulations with GIS and hydrogeochemical analyses has proven to be effective in identifying and locating the different physicochemical processes in the aquifer areas, thus improving understanding of hydrogeochemistry in complex aquifers.     

油气储层埋藏成岩过程中的地球化学热力学

成岩作用是影响油气储层质量的重要因素,而对于埋藏过程中各种化学成岩作用的有效预测直接关系到储层的评价和预测。为了探索油气储层埋藏成岩过程中主要成岩作用对储层质量影响的预测方法,本文利用地球化学热力学的理论,分析了影响储层质量的主要化学成岩作用,包括砂岩中长石的溶解作用、碳酸盐矿物的溶解与沉淀作用和方解石—白云石的转化作用,建立其埋藏条件下溶解—沉淀的地球化学热力学模型。通过这些模型,试图利用地球化学趋势定量地预测砂岩储层次生孔隙的发育趋势、碳酸盐岩埋藏岩溶—充填趋势和埋藏白云石化趋势,为储层评价预测提供理论依据。     

Pleistocene speleothems of Mallorca: implications for palaeoclimate and carbonate diagenesis in mixing zones

The Pleistocene speleothems of Sa Bassa Blanca cave, Mallorca, are excellent indicators of palaeoclimate variations, and are samples that allow evaluation of the products and processes of mixing‐zone diagenesis in an open‐water cave system. Integrated stratigraphic, petrographic and geochemical data from a horizontal core of speleothem identified two main origins for speleothem precipitates: meteoric‐marine mixing zone and meteoric‐vadose zone. Mixing‐zone precipitates formed at and just below the water–air interface of cave pools during interglacial times, when the cave was flooded as a result of highstand sea‐level. Mixing‐zone precipitates include bladed and dendritic high‐Mg calcite, microporous‐bladed calcite with variable Mg content, and acicular aragonite; their presence suggests that calcium‐carbonate cementation is significant in the studied mixing‐zone system. Fluid inclusion salinities, δ¹³C and δ¹⁸O compositions of the mixing‐zone precipitates suggest that mixing ratio was not the primary control on whether precipitation or dissolution occurred, rather, the proximity to the water table and degassing of CO₂ at the interface, were the major controls on precipitation. Thus, simple two‐end‐member mixing models may apply only in mixing zones well below the water table. Meteoric‐vadose speleothems include calcite and high‐Mg calcite with columnar and bladed morphologies. Vadose speleothems precipitated during glacial stages when sea level was lower than present. Progressive increase in δ¹³C and δ¹⁸O of the vadose speleothems resulted from cooling temperatures and more positive seawater δ¹⁸O associated with glacial buildup. Such covariation could be considered as a valid alternative to models predicting invariant δ¹⁸O and highly variable δ¹³C in meteoric calcite. Glacio‐eustatic oscillations of sea‐level are recorded as alternating vadose and mixing‐zone speleothems. Short‐term climatic variations are recorded as alternating aragonite and calcite speleothems precipitated in the mixing zone. Fluid‐inclusion and stable‐isotope data suggest that aragonite, as opposed to calcite, precipitated during times of reduced meteoric recharge.     

Hydrogeochemical modeling of the water seepages through Tannur Dam,southern Jordan

This paper reveals the geochemical processes of dissolution, precipitation and cation exchange that took place during water–rock interaction between water seepages through the Tannur Dam. The Schoeller diagram indicates that there are three major water types originating during water–rock interaction. The first water type is characterized by low salinity that ranges from 1,300 to 2,800 µs/cm, which represents the reservoir water and the water in the right side of the central gallery. The second water type is in the left side of the central gallery, which exhibits medium salinity that reaches about 4,400 µs/cm. The third water type is characterized by very high salinity that reaches a value of around 8,500 µs/cm and represents the water in the right existing adit. The increase of salinity can be explained due to the dissolution of carbonate and sulfate minerals that form the matrix of the foundation and the abutment rocks, and the dissolution of the grout curtain, which is composed of cement and bentonite. Hydrogeochemical modeling, using a computer code PHREEQC, was used to obtain the saturation indices of specific mineral phases, which might be related to interaction with water seepages, and to identify the chemical species of the dissolved ions. The thermodynamic calculations indicate that most of the water samples were undersaturated with respect to gypsum, anhydrite and halite, and were saturated and/or supersaturated with respect to calcite and dolomite. Ca(HCO₃)₂ is the primary water type, as a result of dissolution of carbonate minerals such as calcite and dolomite prevailing at the dam site. However, cation-exchange processes are responsible for the formation of the Na₂SO₄ water type from the CaSO₄ type that formed due to the dissolution of gypsum.     

Development of reaction models for ground-water systems

Methods are described for developing geochemical reaction models from the observed chemical compositions of ground water along a hydrologic flow path. The roles of thermodynamic speciation programs, mass balance calculations, and reaction-path simulations in developing and testing reaction models are contrasted. Electron transfer is included in the mass balance equations to properly account for redox reactions in ground water. The mass balance calculations determine net mass transfer models which must be checked against the thermodynamic calculations of speciation and reaction-path programs. Although reaction-path simulations of ground-water chemistry are thermodynamically valid, they must be checked against the net mass transfer defined by the mass balance calculations. An example is given testing multiple reaction hypotheses along a flow path in the Floridan aquifer where several reaction models are eliminated. Use of carbon and sulfur isotopic data with mass balance calculations indicates a net reaction of incongruent dissolution of dolomite (dolomite dissolution with calcite precipitation) driven irreversibly by gypsum dissolution, accompanied by minor sulfate reduction, ferric hydroxide dissolution, and pyrite precipitation in central Florida. Along the flow path, the aquifer appears to be open to CO₂ initially, and open to organic carbon at more distant points down gradient.     

How do mineral coatings affect dissolution rates? An experimental study of coupled CaCO3 dissolution—CdCO3 precipitation

Coupled CaCO₃ dissolution-otavite (CdCO₃) precipitation experiments have been performed to 1) quantify the effect of mineral coatings on dissolution rates, and 2) to explore the possible application of this coupled process to the remediation of polluted waters. All experiments were performed at 25°C in mixed-flow reactors. Various CaCO₃ solids were used in the experiments including calcite, aragonite, and ground clam, mussel, and cockle shells. Precipitation was induced by the presence of Cd(NO₃)₂ in the inlet solution, which combined with aqueous carbonate liberated by CaCO₃ dissolution to supersaturate otavite. The precipitation of an otavite layer of less than 0.01 μm in thickness on calcite surfaces decreases its dissolution rate by close to two orders of magnitude. This decrease in calcite dissolution rates lowers aqueous carbonate concentrations in the reactor such that the mixed-flow reactor experiments attain a steady-state where the reactive fluid is approximately in equilibrium with otavite, arresting its precipitation. In contrast, otavite coatings are far less efficient in lowering aragonite, and ground clam, mussel, and cockle shell dissolution rates, which are comprised primarily of aragonite. A steady-state is only attained after the precipitation of an otavite layer of 3-10 μm thick; the steady state CaCO₃ dissolution rate is 1-2 orders of magnitude lower than that in the absence of otavite coatings. The difference in behavior is interpreted to stem from the relative crystallographic structures of the dissolving and precipitating minerals. As otavite is isostructural with respect to calcite, it precipitates by epitaxial growth directly on the calcite, efficiently slowing dissolution. In contrast, otavite’s structure is appreciably different from that of aragonite. Thus, it will precipitate by random three dimensional heterogeneous nucleation, leaving some pore space at the otavite-aragonite interface. This pore space allows aragonite dissolution to continue relatively unaffected by thin layers of precipitated otavite. Due to the inefficiency of otavite coatings to slow aragonite and ground aragonite shell dissolution, aragonite appears to be a far better Cd scavenging material for cleaning polluted waste waters.     

Groundwater composition,hydrochemical evolution and mass transfer in a regional detrital aquifer (Baza basin,southern Spain)

The physical–chemical characteristics of the groundwater in the Baza–Caniles detrital aquifer system indicate that a wide diversity of hydrochemical conditions exists in this semiarid region, defining geochemical zones with distinct groundwater types. The least mineralized water is found closest to the main recharge zones, and the salinity of the water increases significantly with depth towards the center of the basin. Geochemical reaction models have been constructed using water chemistry data along flow paths that characterize the different sectors of the aquifer system, namely: Quaternary aquifer, unconfined sector and shallow and deep confined sectors of the Mio–Pliocene aquifer. Geochemical mass–balance calculations indicate that the dominant groundwater reaction throughout the detrital system is dedolomitisation (dolomite dissolution and calcite precipitation driven by gypsum dissolution); this process is highly developed in the central part of the basin due to the abundance of evaporites. Apart from this process, there are others which influence the geochemical zoning of the system. In the Quaternary aquifer, which behaves as a system open to gases and which receives inputs of CO₂ gas derived from the intensive farming in the area, the interaction of the CO₂ with the carbonate matrix of the aquifer produces an increase in the alkalinity of the water. In the shallow confined sector of the Mio–Pliocene aquifer, the process of dedolomitisation evolves in a system closed to CO₂ gas. Ca²⁺/Na⁺ cation exchange and halite dissolution processes are locally important, which gives rise to a relatively saline water. Finally, in the deep confined sector, a strongly reducing environment exists, in which the presence of H₂S and NH⁺₄ in the highly mineralized groundwater can be detected. In this geochemical zone, the groundwater system is considered to be closed to CO₂ gas proceeding from external sources, but open to CO₂ from oxidation of organic matter. The geochemical modeling indicates that the chemical characteristics of this saline water are mainly due to SO₄ dissolution, dedolomitisation and SO₄ reduction, coupled with microbial degradation of lignite.     

Silicate and carbonate mineral weathering in soil profiles developed on Pleistocene glacial drift (Michigan, USA): Mass balances based on soil water geochemistry

Geochemistry of soil, soil water, and soil gas was characterized in representative soil profiles of three Michigan watersheds. Because of differences in source regions, parent materials in the Upper Peninsula of Michigan (the Tahquamenon watershed) contain only silicates, while those in the Lower Peninsula (the Cheboygan and the Huron watersheds) have significant mixtures of silicate and carbonate minerals. These differences in soil mineralogy and climate conditions permit us to examine controls on carbonate and silicate mineral weathering rates and to better define the importance of silicate versus carbonate dissolution in the early stage of soil-water cation acquisition.Soil waters of the Tahquamenon watershed are the most dilute; solutes reflect amphibole and plagioclase dissolution along with significant contributions from atmospheric precipitation sources. Soil waters in the Cheboygan and the Huron watersheds begin their evolution as relatively dilute solutions dominated by silicate weathering in shallow carbonate-free soil horizons. Here, silicate dissolution is rapid and reaction rates dominantly are controlled by mineral abundances. In the deeper soil horizons, silicate dissolution slows down and soil-water chemistry is dominated by calcite and dolomite weathering, where solutions reach equilibrium with carbonate minerals within the soil profile. Thus, carbonate weathering intensities are dominantly controlled by annual precipitation, temperature and soil pCO₂. Results of a conceptual model support these field observations, implying that dolomite and calcite are dissolving at a similar rate, and further dissolution of more soluble dolomite after calcite equilibrium produces higher dissolved inorganic carbon concentrations and a Mg²⁺/Ca²⁺ ratio of 0.4.Mass balance calculations show that overall, silicate minerals and atmospheric inputs generally contribute <10% of Ca²⁺ and Mg²⁺ in natural waters. Dolomite dissolution appears to be a major process, rivaling calcite dissolution as a control on divalent cation and inorganic carbon contents of soil waters. Furthermore, the fraction of Mg²⁺ derived from silicate mineral weathering is much smaller than most of the values previously estimated from riverine chemistry.     

Holocene meteoric dolomitization of Pleistocene limestones, North Jamaica

Wholesale removal of the unstable carbonate phases aragonite and Mg-calcite, and precipitation of calcite and dolomite is currently taking place where phreatic waters (the modern water table) invade 120,000-year-old Pleistocene biolithites (Falmouth Formation), North Jamaica. Pleistocene rocks presently in the vadose zone are relatively unaltered, and consist of mineralogically unstable scleractinian biolithites. At the water table, a narrow zone of solution, a ‘water table cave’ is commonly encountered. Below the water table the rocks are invariably more highly altered than those above. Mg-calcites are very rare, and considerable dissolution of aragonite has commonly occurred. Dolomite occurs as 8–25 μm, subhedral to euhedral crystals replacing micrite, or precipitated as void linings. The isotopic composition of the dolomite (δO¹⁸=-1·0 %0, δC¹³=-8·4 %0), and its high strontium content (3000 p.p.m.) suggest precipitation as CO₂-oversaturated meteoric groundwaters invade the mineralogically unstable biolithites, dissolve Mg-calcites and Sr-rich aragonites, and de-gas. Because some dolomitized rocks are enriched in magnesium relative to unaltered biolithites, addition of magnesium to the system is necessitated, and is probably derived from sea water in the mixing zone. Phreatic meteoric diagenesis is thus demonstrated to be a rapid process, and to be capable of dolomitization.     

Formation of modern dolomite in hypersaline pans of the Western Cape,South Africa

Authigenic calcite and dolomite and biogenic aragonite occur in Holocene pan sediments in a Mediterranean‐type climate on the western coastal plain of South Africa. Sediment was analysed from a Late Pleistocene coastal pan at Yzerfontein and four Holocene inland pans ranging from brackish to hypersaline. The pans are between 0·08 and 0·14 km² in size. The δ¹⁸O_PDB values of carbonate minerals in the pan sediments range from ?2·41 to 5·56‰ and indicate precipitation from evaporative waters. Covariance of total organic content and percentage carbonate minerals, and the δ¹³C_PDB values of pan carbonate minerals (?8·85 to ?1·54‰) suggest that organic matter degradation is a significant source of carbonate ions. The precipitation of the carbonate minerals, especially dolomite, appears to be mediated by sulphate‐reducing bacteria in the black sulphidic mud zone found in the brine‐type hypersaline pans. The knobbly, sub‐spherical texture of the carbonate minerals suggests that the precipitation of the carbonate minerals, particularly dolomite, is related to microbial processes. The ⁸⁷Sr/⁸⁶Sr ratios of pan carbonate minerals (0·7108 to 0·7116) are slightly higher than modern sea water and indicate a predominantly sea water (marine aerosol) source for calcium (Ca²⁺) ions with relatively minor amounts of Ca²⁺ derived from the chemical weathering of bedrock.     

Hydrogeochemical evaluation of fractured Limestone aquifer by applying a geochemical model in eastern Nile Valley,Egypt

Rock water interactions play an important role in the flow of groundwater. Groundwater samples were collected from deep production wells with depths ranging from 120 to 230 m. Complete chemical analysis of 40 groundwater samples was collected from the fractured limestone aquifer including major cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and major anions (Cl^?, SO₄ ^2?, HCO₃ ^?, CO₃ ^2?). A geochemical modeling (NETPATH Software) was applied for environmental simulate net geochemical mass-balance reactions between initial and final waters along a hydrologic flow path. This program simulates selected evolutionary waters for every possible combination of the plausible phases that account for the composition of a selected set of chemical constraints in the system. The groundwater of the Eocene aquifer mainly belongs to fairly fresh water with salinity contents ranging from 228 to 3595 ppm. The measured groundwater levels range between 8 and 25 m near the river Nile to the limestone plateau (eastwards). Consequently, groundwater flows from east to westward toward the river Nile. Groundwater aquifer in the study area is mainly composed of fractured limestone; the saturated states of the PCO₂, calcite, aragonite, dolomite, siderite, gypsum, anhydrite, hematite, and goethite in addition to H₂ gas were estimated. The undersaturated state of carbon dioxide reflects closed conditions and very low probability of recent recharge, and it reveals also the high tendency of water to precipitates carbonate species. Undersaturation by carbonate minerals is only restricted to some pockets distributed on the different places of the aquifer in the study area. The majority of groundwater samples of Eocene aquifer in the study area indicated that groundwater is not suitable for irrigation with treatment and requires good drainage.     

Effect of saline water bodies on the hydrogeochemical evaluation of groundwater at Kalpakkam coastal site, Tamil Nadu

Geochemical signatures of groundwater in Kalpakkam plant site were used to identify the geochemistry of the unconfined coastal aquifer. Ground water samples collected from 14 borewells around the study area were studied for four different seasons viz. Summer, South-west monsoon, North-east monsoon and Post-monsoon to identify the major geochemical processes activated in the study area. Data obtained through chemical analyses of groundwater samples were used for graphical plots and geochemical calculations. Piper, Chloro alkaline indices and Chadda’s diagram were determined for geochemical classification of the groundwaters. Identified geochemical processes were verified and quantified using hydrogeochemical aqueous speciation model, PHREEQC to find out the Saturation Indices (SI) of the possible minerals of the study area. It was observed that majority of the bore well samples were under saturated with respect to minerals such as Gypsum, Aragonite and oversaturated with respect to dolomite and calcite. Parameters such as ion exchange and reverse ion exchange, saline water incursion were observed due to the presence of saline water bodies in addition to dissolution of minerals.