Dynamics of stormflow generation—A hillslope‐scale field study in east‐central Pennsylvania,USA

A 40 m × 20 m mowed, grass hillslope adjacent to a headwater stream within a 26‐ha watershed in east‐central Pennsylvania, USA, was instrumented to identify and map the extent and dynamics of surface saturation (areas with the water table at the surface) and surface runoff source areas. Rainfall, stream flow and surface runoff from the hillslope were recorded at 5‐min intervals from 11 August to 22 November 1998, and 13 April to 12 November 1999. The dynamics of the water table (0 to 45 cm depth from the soil surface) and the occurrence of surface runoff source areas across the hillslope were recorded using specially designed subsurface saturation and surface runoff sensors, respectively. Detailed data analyses for two rainfall events that occurred in August (57·7 mm in 150 min) and September (83·6 mm in 1265 min) 1999, illustrated the spatial and temporal dynamics of surface saturation and surface runoff source areas. Temporal data analyses showed the necessity to measure the hillslope dynamics at time intervals comparable to that of rainfall measurements. Both infiltration excess surface runoff (runoff caused when rainfall intensity exceeds soil infiltration capacity) and saturation excess surface runoff (runoff caused when soil moisture storage capacity is exceeded) source areas were recorded during these rainfall events. The August rainfall event was primarily an infiltration excess surface runoff event, whereas the September rainfall event produced both infiltration excess and saturation excess surface runoff. Occurrence and disappearance of infiltration excess surface runoff source areas during the rainfall events appeared scattered across the hillslope. Analysis of surface saturation and surface runoff data showed that not all surface saturation areas produced surface runoff that reached the stream. Emergence of subsurface flow to the surface during the post‐rainfall periods appeared to be a major flow process dominating the hillslope after the August rainfall event. Copyright © 2002 John Wiley & Sons, Ltd.     

A statistically based runoff‐yield model coupling infiltration excess and saturation excess mechanisms

A statistically based runoff‐yield model is proposed in this paper. The model considers spatial heterogeneities of rainfall, soil infiltration capacity and soil water storage capacity that are main factors controlling runoff‐yield process. It assumes that the spatial variation of rainfall intensity at each time step can be characterized by a probability density function, which is estimated by matching the hyetograph through goodness‐of‐fit measure, whereas the spatial heterogeneities of soil infiltration capacity and soil water storage capacity are described by parabola‐type functions. Surface runoff is calculated according to infiltration excess mechanism; the statistical distribution of surface runoff rate can be deduced with the joint distribution of rainfall intensity and soil infiltration rate, thus obtaining a quasi‐analytical solution for surface runoff. Based on saturation excess mechanism, the groundwater flow (flows below the ground are collectively referred to as groundwater flow) is calculated by infiltration and the probability distribution of soil water storage capacity. Consequently, the total runoff is composed of infiltration excess and saturation excess runoff components. As an example, this model is applied to flood event simulation in Dongwan catchment, a semi‐humid region and a tributary of Yellow River in China. It indicates that the proposed runoff‐yield model could achieve acceptable accuracy. Copyright © 2011 John Wiley & Sons, Ltd.     

Macroporosity and infiltration in blanket peat: the implications of tension disc infiltrometer measurements

Little is known about the processes of infiltration and water movement in the upper layers of blanket peat. A tension infiltrometer was used to measure hydraulic conductivity in a blanket peat in the North Pennines, England. Measurements were taken from the surface down to 20 cm in depth for peat under four different vegetation covers. It was found that macropore flow is a significant pathway for water in the upper layers of this soil type. It was also found that peat depth and surface vegetation cover were associated with macroporosity and saturated hydraulic conductivity. The proportion of macropore flow was found to be greater at 5 cm depth than at 0, 10 and 20 cm depth. Peat beneath a Sphagnum cover tends to be more permeable and a greater proportion of macropore flow can occur beneath this vegetation type. Functional macroporosity and matrix flow in the near‐surface layers of bare peat appear to have been affected by weathering processes. Comparision of results with rainfall records demonstrates that infiltration‐excess overland flow is unlikely to be a common runoff‐generating mechanism on blanket peat; rather, a saturation‐excess mechanism combined with percolation‐excess above much less permeable layers dominates the runoff response. Copyright © 2001 John Wiley & Sons, Ltd.     

Predicting saturation‐excess runoff distribution with a lumped hillslope model: SWAT‐HS

Saturation‐excess runoff is the major runoff mechanism in humid well‐vegetated areas where infiltration rates often exceed rainfall intensity. Although the Soil and Water Assessment Tool (SWAT) is one of the most widely used models, it predicts runoff based mainly on soil and land use characteristics, and is implicitly an infiltration‐excess runoff type of model. Previous attempts to incorporate the saturation‐excess runoff mechanism in SWAT fell short due to the inability to distribute water from one hydrological response unit to another. This paper introduces a modified version of SWAT, referred to as SWAT‐Hillslope (SWAT‐HS). This modification improves the simulation of saturation‐excess runoff by redefining hydrological response units based on wetness classes and by introducing a surface aquifer with the ability to route interflow from “drier” to “wetter” wetness classes. Mathematically, the surface aquifer is a nonlinear reservoir that generates rapid subsurface stormflow as the water table in the surface aquifer rises. The SWAT‐HS model was tested in the Town Brook watershed in the upper reaches of the West Branch Delaware River in the Catskill region of New York, USA. SWAT‐HS predicted discharge well with a Nash‐Sutcliffe Efficiency of 0.68 and 0.87 for daily and monthly time steps. Compared to the original SWAT model, SWAT‐HS predicted less surface runoff and groundwater flow and more lateral flow. The saturated areas predicted by SWAT‐HS were concentrated in locations with a high topographic index and were in agreement with field observations. With the incorporation of topographic characteristics and the addition of the surface aquifer, SWAT‐HS improved streamflow simulation and gave a good representation of saturated areas on the dates that measurements were available. SWAT‐HS is expected to improve water quality model predictions where the location of the surface runoff matters.     

Sources and sinks of nutrients in a New Zealand hill pasture catchment I. Stormflow generation

The processes of stormflow generation were studied in a hill pasture catchment near Hamilton, New Zealand. Although rainfall was relatively evenly distributed throughout the year, stormflow was highly seasonal and over 65 per cent occurred during the winter. Three main processes contributing to stormflow were identified which could be related to soil type and physiographic position. On gleyed soils derived from rhyolitic colluvium, saturation overland flow was the dominant process. Hydrographs from ‘Whipkey’ throughflow troughs also indicated that there was a subsurface response (saturated wedge) from this soil type. On steeper convex slopes, more permeable soils were derived from weathered greywacke. The presence of ephemeral springs on the hillslopes and direct observation during storm events indicated that storm runoff was generated as return flow from this soil. It was noted that nitrate concentrations from subsurface sources were 5–10 times higher than surface runoff. This difference in concentration was utilized in a chemical mixing equation which partitioned stormflow sources. This was compared with the stormflow predicted from rain falling on to saturated areas. There was good agreement between the two models for winter-spring events with respect to the volumes of surface runoff predicted, however the saturated areas model underestimated total stormflow. The results of the study are briefly discussed in terms of the potential for water quality management.     

Field investigation and modelling of coupled stream discharge and shallow water‐table dynamics in a small Mediterranean catchment (Sardinia)

In the semi‐arid Mediterranean environment, the rainfall–runoff relationships are complex because of the markedly irregular patterns in rainfall, the seasonal mismatch between evaporation and rainfall, and the spatial heterogeneity in landscape properties. Watersheds often display considerable non‐linear threshold behavior, which still make runoff generation an open research question. Our objectives in this context were: to identify the primary processes of runoff generation in a small natural catchment; to test whether a physically based model, which takes into consideration only the primary processes, is able to predict spatially distributed water‐table and stream discharge dynamics; and to use the hydrological model to increase our understanding of runoff generation mechanisms. The observed seasonal dynamics of soil moisture, water‐table depth, and stream discharge indicated that Hortonian overland‐flow was negligible and the main mechanism of runoff generation was saturated subsurface‐flow. This gives rise to base‐flow, controls the formation of the saturated areas, and contributes to storm‐flow together with saturation overland‐flow. The distributed model, with a 1D scheme for the kinematic surface‐flow, a 2D sub‐horizontal scheme for the saturated subsurface‐flow, and ignoring the unsaturated flow, performed efficiently in years when runoff volume was high and medium, although there was a smoothing effect on the observed water‐table. In dry years, small errors greatly reduced the efficiency of the model. The hydrological model has allowed to relate the runoff generation mechanisms with the land‐use. The forested hillslopes, where the calibrated soil conductivity was high, were never saturated, except at the foot of the slopes, where exfiltration of saturated subsurface‐flow contributed to storm‐flow. Saturation overland‐flow was only found near the streams, except when there were storm‐flow peaks, when it also occurred on hillslopes used for pasture, where soil conductivity was low. The bedrock–soil percolation, simulated by a threshold mechanism, further increased the non‐linearity of the rainfall–runoff processes. Copyright © 2013 John Wiley & Sons, Ltd.     

Assessing the impact of the hydraulic properties of a crusted soil on overland flow modelling at the field scale

Soil surface crusts are widely reported to favour Hortonian runoff, but are not explicitly represented in most rainfall‐runoff models. The aim of this paper is to assess the impact of soil surface crusts on infiltration and runoff modelling at two spatial scales, i.e. the local scale and the plot scale. At the local scale, two separate single ring infiltration experiments are undertaken. The first is performed on the undisturbed soil, whereas the second is done after removal of the soil surface crust. The HYDRUS 2D two‐dimensional vertical infiltration model is then used in an inverse modelling approach, first to estimate the soil hydraulic properties of the crust and the subsoil, and then the effective hydraulic properties of the soil represented as a single uniform layer. The results show that the crust hydraulic conductivity is 10 times lower than that of the subsoil, thus illustrating the limiting role the crust has on infiltration. Moving up to the plot scale, a rainfall‐runoff model coupling the Richards equation to a transfer function is used to simulate Hortonian overland flow hydrographs. The previously calculated hydraulic properties are used, and a comparison is undertaken between a single‐layer and a double‐layer representation of the crusted soil. The results of the rainfall‐runoff model show that the soil hydraulic properties calculated at the local scale give acceptable results when used to model runoff at the plot scale directly, without any numerical calibration. Also, at the plot scale, no clear improvement of the results can be seen when using a double‐layer representation of the soil in comparison with a single homogeneous layer. This is due to the hydrological characteristics of Hortonian runoff, which is triggered by a rainfall intensity exceeding the saturated hydraulic conductivity of the soil surface. Consequently, the rainfall‐runoff model is more sensitive to rainfall than to the subsoil's hydrodynamic properties. Therefore, the use of a double‐layer soil model to represent runoff on a crusted soil does not seem necessary, as the increase of precision in the soil discretization is not justified by a better performance of the model. Copyright © 2005 John Wiley & Sons, Ltd.     

Revegetation impacts on runoff generation processes in a typical loess catchment

Since 1999, large-scale ecosystem restoration has been implemented in the Loess Plateau, effectively increasing regional vegetation coverage. Vegetation restoration has significantly elevated the saturated hydraulic conductivity (Ks) of the near-surface soil layers and increased the vertical heterogeneity of the Ks profile. Many studies have examined the change of runoff due to revegetation, yet the impacts of Ks profile on the soil moisture distribution and runoff generation processes were less explored. In this study, numerical simulations were conducted to investigate how changes in the Ks profile caused by vegetation restoration influenced the hydrological responses at event scale. The numerical simulation results show that the increase of surface Ks caused by vegetation restoration can effectively reduce runoff at event scale. Moreover, the enhancement of vertical heterogeneity of Ks profiles can significantly change the vertical profile of soil water content, prompting more water to percolate into the deep soil layer. When rainfall exceeds a threshold, the accumulation of soil water above the relatively less permeable layer can cause short-term saturation in shallow soil layers, resulting in a transient perched water table. As a result, after the vegetation restoration in the Loess Plateau, though Horton overland flow is still the main runoff generation mechanism, there is a possibility of the emergence of Dunne overland flow under the high vegetation coverage (e.g., NDVI larger than 0.5). This emergence of new runoff generation mechanism, saturation excess runoff, in the Loess Plateau due to the vegetation restoration could provide scientific guidance for water and sediment movement, soil and water conservation practices, and desertification control in the Loess Plateau.     

INFERRING HYDROLOGICAL PROCESSES IN A TEMPERATE BASIN USING ISOTOPIC AND GEOCHEMICAL HYDROGRAPH SEPARATION: A RE-EVALUATION

Simultaneous monitoring of conservative and non-conservative tracers in streamflow offers a valuable means of obtaining information on the age and flow paths of water reaching the basin outlet. Previous studies of stormflow generation in a small forested basin on the Canadian Shield used isotopic (IHS) and geochemical hydrograph separations (GHS) to infer that some event water during snowmelt reaches the stream via subsurface pathways, and that surface water runoff is generated by direct precipitation on to saturated areas (DPSA) in the stream valley. These hypotheses were tested for rainfall inputs using simultaneous IHS (¹⁸O) and GHS (dissolved silica) of basin stormflow, supplemented by hydrochemical and hydrometric data from throughflow troughs installed on basin slopes. Comparison of pre-event and subsurface water hydrographs did not provide conclusive evidence for subsurface movement of event water to the stream, owing to the appreciable uncertainty associated with the hydrograph separations. However, IHSs of runoff at the soil–bedrock interface on basin slopes indicated that event water comprised 25–50% of total runoff from areas with deep soil cover, and that these contributions supplied event water flux from the basin in excess of that attributable to DPSA. The surface water component of stormflow estimated from the GHS was also largely the result of DPSA. GHS assumes that dissolved silica is rapidly and uniformly taken up by water infiltrating the soil and that water moving via surface pathways retains the low dissolved silica level of rainfall; however, neither assumption was supported by the hillslope results. Instead, results suggest that the observed depression of silica levels in basin stormflow previously attributed to dilution by DPSA was partly a function of transport of dilute event water to the channel via preferential pathways. Implications of these results for the general use of simultaneous IHS and GHS to infer hydrological processes are discussed. © 1997 by John Wiley & Sons, Ltd.     

A simplified model for estimating field‐scale surface runoff hydrographs

The problem of obtaining field‐scale surface response to rainfall events is complicated by the spatial variability of infiltration characteristics of the soil and rainfall. In this paper, we develop and test a simplified model for generating surface runoff over fields with spatial variation in both rainfall rate and saturated hydraulic conductivities. The model is able to represent the effects of local variation in infiltration, as well as the run‐on effect that controls infiltration of excess water from saturated upstream areas. The effective rainfall excess is routed to the slope outlet using a simplified solution of the kinematic wave approximation. Model results are compared to averaged hydrographs from numerically‐intensive Monte–Carlo simulations for observed and design rainfall events and soil patterns that are typical of Central Italy. The simplified model is found to yield satisfactory results at a relatively small computational expense. A proposal to include a simple channel routing scheme is also presented as a prelude to extend this conceptualization to watershed scales. Copyright © 2006 John Wiley & Sons, Ltd.     

The hydrogeomorphic influences on alluvial gully erosion along the Mitchell River fluvial megafan

Hydrogeomorphic processes influencing alluvial gully erosion were evaluated at multiple spatial and temporal scales across the Mitchell River fluvial megafan in tropical Queensland, Australia. Longitudinal changes in floodplain inundation were quantified using river gauge data, local stage recorders and HEC‐RAS modelling based on LiDAR topographic data. Intra‐ and interannual gully scarp retreat rates were measured using daily time‐lapse photographs and annual GPS surveys. Erosion was analysed in response to different water sources and associated erosion processes across the floodplain perirheic zone, including direct rainfall, infiltration‐excess runoff, soil‐water seepage, river backwater and overbank flood inundation. The frequency of river flood inundation of alluvial gullies changed longitudinally according to river incision and confinement. Near the top of the megafan, flood water was contained within the macrochannel up to the 100‐year recurrence interval, but river backwater still partially inundated adjacent gullies eroding into Pleistocene alluvium. In downstream Holocene floodplains, inundation of alluvial gullies occurred beyond the 2‐ to 5‐year recurrence interval and contributed significantly to total annual erosion. However, most gully scarp retreat at all sites was driven by direct rainfall and infiltration‐excess runoff, with the 24‐h rainfall total being the most predictive variable. The remaining variability can be explained by seasonal vegetative conditions, complex cycles of soil wetting and drying, tension crack development, near‐surface pore‐water pressure, soil block undermining from spalling and overland flow, and soil property heterogeneity. Implications for grazing management impacts on soil surface and perennial grass conditions include effects on direct rainfall erosion, water infiltration, runoff volume, water concentration along tracks, and the resistance of highly dispersible soils to gully initiation or propagation under intense tropical rainfall. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of hillslope topography on hydrological responses in a weathered granite mountain,Japan: comparison of the runoff response between the valley‐head and the side slope

To evaluate the effects of hillslope topography on storm runoff in a weathered granite mountain, discharge rate, soil pore water pressures, and water chemistry were observed on two types of hillslope: a valley‐head (a concave hillslope) and a side slope (a planar hillslope). Hydrological responses on the valley‐head and side slope reflected their respective topographic characteristics and varied with the rainfall magnitude. During small rainfall events (<35 mm), runoff from the side slope occurred rapidly relative to the valley‐head. The valley‐head showed little response in storm runoff. As rainfall amounts increased (35–60 mm), the valley‐head yielded a higher flow relative to the side slope. For large rainfall events (>60 mm), runoff from both hillslopes increased with rainfall, although that from the valley‐head was larger than that from the side slope. The differences in the runoff responses were caused by differences in the roles of lower‐slope soils and the convergence of the hillslope. During small rainfall events, the side slope could store little water; in contrast, all rainwater could be stored in the soils at the valley‐head hollow. As the amount of rainfall increased, the subsurface saturated area of the valley‐head extended from the bottom to the upper portion of the slope, with the contributions of transient groundwater via lateral preferential flowpaths due to the high concentration of subsurface water. Conversely, saturated subsurface flow did not contribute to runoff responses, and the subsurface saturated area at the side slope did not extend to the upper slope for the same storm size. During large rainfall events, expansion of the subsurface saturated area was observed in both hillslopes. Thus, differences in the concentration of subsurface water, reflecting hillslope topography, may create differences in the extension of the subsurface saturated area, as well as variability in runoff responses. Copyright © 2007 John Wiley & Sons, Ltd.     

MEASURING AND MODELLING OF SOIL WATER DYNAMICS AND RUNOFF GENERATION IN AN AGRICULTURAL LOESSIAL HILLSLOPE

Surface runoff may be generated when the rainfall intensity exceeds the infiltration capacity, or when the soil profile is saturated with water. Indications exist that both types of overland flow may occur in hilly agricultural loess regions. Here, for a loessial hillslope under maize in the southern part of The Netherlands, it was shown, with pressure head and runoff measurements, that Hortonian overland flow occurs during typical summer rain events. Surface runoff was initiated after saturation of the top 5–10 cm of the soil. Deeper in the soil, unsaturated conditions prevailed while runoff took place. Peak runoff discharges at the outlet of the subcatchment occurred a few minutes after peak rainfall intensities were measured. It appeared that SWMS_2D, a two-dimensional water flow model, was capable in simulating observed pressure head changes and runoff. Simulated potential runoff for the transect studied was higher by a magnitude of three than the measured areal average. This indicates effects of surface ponding, and the probable location of this particular transect in a region with high runoff production.     

Spatial and temporal dynamics of soil moisture after rainfall events along a slope in Regosols of southwest China

High frequency seasonal drought in purple soils (Regosols in FAO taxonomy) of the hilly upland areas of Sichuan basin, China, is one of the key restrictive factors for crop production. In order to manage irrigation and fertilizer application in these soils effectively, the soil water content in a sloped plot with 60 cm soil depth was measured by neutron probe devices to investigate the soil moisture regime during the 1998 rainy season after various amounts of rainfall events. The results showed that variation of soil moisture along the slope positions was highest in the top soil layer during the period of sporadic rainfall that did not induce any runoff. The coefficients of variation of soil moisture at various slope positions (upper, middle, and lower) are 17·36%, 8·95%, 10·25%, 8·58%, 8·05% and 9·21% at the 10 cm, 20 cm, 30 cm, 40 cm, 50 cm and 60 cm soil depths respectively. When surface runoff occurred, the soil moisture dynamics at various positions on the plot were then very different. Soil water content decreased more rapidly on the upper slope than on the middle and lower slope positions. When both surface runoff and throughflow occurred, the soil moisture dynamics in the various layers showed a stable period (soil water content is near constant as time elapses) that lasted about 1 week. Also, the pattern of moisture dynamics is ‘decreasing–stabilization–decreasing’. Thus, irrigation and fertilization management according to the spatial and temporal features of soil moisture dynamics on sloped land can increase the water and fertilizer utilization efficacy by reducing their losses during the stable period. Copyright © 2006 John Wiley & Sons, Ltd.     

Evaluating the hydrological and hydrochemical responses of a High Arctic catchment during an exceptionally warm summer

The Arctic has experienced substantial warming during the past century with models projecting continued warming accompanied by increases in summer precipitation for most regions. A key impact of increasing air surface temperatures is the deepening of the active layer, which is expected to alter hydrological processes and pathways. The aim of this study was to determine how one of the warmest and wettest summers in the past decade at a High Arctic watershed impacted water infiltration and storage in deeply thawed soil and solute concentrations in stream runoff during the thaw period. In June and July 2012 at the Cape Bounty Watershed Observatory, we combined active layer measurements with major ion concentrations and stable isotopes in surface waters to characterize the movement of different runoff sources: snowmelt, rainfall, and soil water. Results indicate that deep ground thaw enhanced the storage of infiltrated water following rainfall. Soil water from infiltrated rainfall flowed through the thawed transient layer and upper permafrost, which likely solubilized ions previously stored at depth. Subsequent rainfall events acted as a hydrological flushing mechanism, mobilizing solutes from the subsurface to the surface. This solute flushing substantially increased ion concentrations in stream runoff throughout mid to late July. Results further suggest the importance of rainfall and soil water as sources of runoff in a High Arctic catchment during mid to late summer as infiltrated snowmelt is drained from soil following baseflow. Although there was some evaporation of surface water, our study indicates that flushing from solute stores in the transient layer was the primary driver of increased ion concentrations in stream runoff and not evaporative concentration of surface water. With warmer and wetter summers projected for the Arctic, ion concentrations in runoff (especially in the late thaw season), will likely increase due to the deep storage and subsurface flow of infiltrated water and subsequent flushing of previously frozen solutes to the surface.     

The relationship between throughflow generation and the solute concentration of soil and stream water

Variation in solute concentrations of soil and stream water during throughflow events was studied at Bicknoller Combe, Somerset, England. The main hydrological process acting in the catchment involves a delayed throughflow discharge pulse a day or two after the rainfall event. During the period of storm runoff, coincident with the rainfall, the solutes in the stream are diluted, but their concentration in the throughflow remains unchanged. During the delayed throughflow pulse, concentrations of both soil and stream water increase. This is due to additional leaching from the soil in hollows where saturated moisture conditions prevail. The results suggest that two distinct erosional environments may exist: on the spurs, leaching seems to be related solely to infiltration processes, whilst in the hollows, saturated throughflow also contributes to the solute removal. This contrast in erosional processes may perhaps account for the difference in slope form and development between the hollow and spur zones.     

Fire‐induced changes in soil water repellency increased fingered flow and runoff rates following the 2004 Huelva wildfire

Water repellency (WR) from fire‐affected soils can affect infiltration processes and increase runoff rates. We investigated the effects of fire‐induced changes in soil WR and the related soil hydrological response after one of the largest wildfires in Spain in recent years. The vertical distribution of WR in soil profiles was studied under oak and pine forests and the wetting pattern was analysed after rainfall simulations (85 mm h^?1 during 60 min). After burning, the persistence of WR in soils under oaks increased in the upper 0–5 cm of soil in comparison with pre‐fire WR, but no significant changes were observed under pines. After a fire, WR was stronger and the thickness of the water‐repellent layer increased in soils under pines in the upper 0–16 cm of soil. The hydrophobic layer was thinner under oaks, where no strong to extremely water‐repellent samples were observed below 12 (in burnt soils) and 8 cm (in unburnt soils). Uniform wetting was observed through soil depth in burnt and unburnt soils under oaks, as a consequence of the prevailing matrix flux infiltration. Water was mostly stored in the upper few centimetres and soil became rapidly saturated, favouring a continuous rise in the runoff rate during the experiments. Moisture profiles under pines showed a heterogeneous wetting pattern, with highly irregular wetting fronts, as a result of wettable and water‐repellent three‐dimensional soil patches. In this case, runoff rates on burnt plots increased in relation to unburnt plots, but runoff generation reached a steady state after 25–30 min of simulated rainfall at an intensity of 85 mm h^?1. Rainfall water infiltrated over a small part of the ponded area, where the vertical pressure of the water column overcame the WR. Copyright © 2010 John Wiley & Sons, Ltd.     

Experimental study of water fluxes in a residential area: 2. Road infiltration,runoff and evaporation

Lack of accurate data has led some hydrologists and city planners to assume that urban infiltration is zero and runoff is 100% of the rainfall. These assumptions lead to an over estimation of road runoff volume and an underestimation of direct recharge to groundwater, which is already rising under some UK cities. This study investigates infiltration and runoff processes and quantifies the percentage of rainfall that contributes to storm drainage, and that which infiltrates through different types of road surface. Access tubes were installed for measuring soil water content using a neutron probe in three car parks, a road and a grass site at the Centre for Ecology and Hydrology, Crowmarsh Gifford, Wallingford. Storm drainage was recorded at the exit of the Thamesmead Estate in Crowmarsh Gifford, just before the drain joins the River Thames at Wallingford. Rainfall and water table depth were also recorded. Weekly measurements of soil moisture content indicated that the top 40 cm layer is not influenced by water‐table fluctuations and, therefore, positive changes in soil moisture could be attributed to infiltration of rainfall through the surface. Depending on the nature of the surface, subsurface layers, level of traffic, etc., between 6 and 9% of rainfall was found to infiltrate through the road surfaces studied. The storm drainage generated by road runoff revealed a flow pattern similar to that of the receiving watercourse (River Thames) and increased with the increase of infiltration and soil water content below the road surface. The ratio of runoff to rainfall was 0·7, 0·9 and 0·5 for annual, winter (October–March) and summer (April–September) respectively. As the results of the infiltration indicated that 6 to 9% of annual rainfall infiltrates through the road surface, this means that evaporation represents, 21–24% of annual rainfall, with more evaporation taking place during summer than winter. Copyright © 2003 John Wiley & Sons, Ltd.     

Runoff generation mechanisms in pastures of the Sand Mountain region of Alabama—a field investigation

Excessive application of poultry litter to pastures in the Sand Mountain region of north Alabama has resulted in phosphorus (P) contamination of surface water bodies and buildup of P in soils of this region. Since surface runoff is recognized as the primary mechanism of P transport, understanding surface runoff generation mechanisms are crucial for alleviating water quality problems in this region. Identification of surface runoff generation mechanisms is also important for delineation of hydrologically active areas (HAAs). Therefore, the specific objective of this study was to identify surface runoff generation mechanisms (infiltration excess versus saturation excess) using distributed surface and subsurface sensors and rain gauge. Results from three rainfall events (2·13–3·43 cm) of differing characteristics, and sensor data at four locations with differing soil hydraulic properties along the hillslope showed that the main surface runoff generation mechanism in this region is infiltration excess. Because of this, rainfall intensity and soil hydraulic conductivity were found to play dominant roles in surface runoff generation in this region. Further, only short periods of a few rainfall events during which the rainfall intensity is high produce surface runoff. This study indicates that perhaps subsurface flows and transport of P in subsurface flows need to be quantified to reduce P contamination of surface water bodies in this region. Current studies at this location are identifying spatial and temporal distribution of HAAs, quantifying rainfall characteristics that generate runoff, and estimating runoff volume that results from connected HAAs. Copyright © 2008 John Wiley & Sons, Ltd.     

Experimental study and mathematical modelling of soluble chemical transfer from unsaturated/saturated soil to surface runoff

A one‐dimensional, two‐layer solute transport model is developed to simulate chemical transport process in an initially unsaturated soil with ponding water on the soil surface before surface runoff starts. The developed mathematical model is tested against a laboratory experiment. The infiltration and diffusion processes are mathematically lumped together and described by incomplete mixing parameters. Based on mass conservation and water balance equations, the model is developed to describe solute transport in a two‐zone layer, a ponding runoff zone and a soil mixing zone. The two‐zone layer is treated as one system to avoid describing the complicated chemical transport processes near the soil surface in the mixing zone. The proposed model was analytically solved, and the solutions agreed well with the experimental data. The developed experimental method and mathematical model were used to study the effect of the soil initial moisture saturation on chemical concentration in surface runoff. The study results indicated that, when the soil was initially saturated, chemical concentration in surface runoff was significantly (two orders of magnitude) higher than that with initially unsaturated soil, while the initial chemical concentrations at the two cases were of the same magnitude. The soil mixing depth for the initially unsaturated soil was much larger than that for the initially saturated soil, and the incomplete runoff mixing parameter was larger for the initially unsaturated soil. The higher the infiltration rate of the soil, the greater the infiltration‐related incomplete mixing parameter. According to the quantitative analysis, the soil mixing depth was found to be sensitive for both initially unsaturated and saturated soils, and the incomplete runoff mixing parameter was sensitive for initially saturated soil but not for the initially unsaturated soil; the incomplete infiltration mixing parameter behaved just the opposite. Some suggestions are made for reducing chemical loss from runoff. Copyright © 2010 John Wiley & Sons, Ltd.