Removal of heavy metal ions from drinking water by alginate-immobilised <Emphasis Type="Italic">Chlorella sorokiniana</Emphasis>

This paper investigates the potential of alginate-immobilised Chlorella sorokiniana for removing Cu²⁺, Ni²⁺ and Cd²⁺ ions from drinking water solutions. The effects of initial metal concentrations, contact times and temperatures on the biosorptions and removal efficiencies of the tested metals were investigated at initial pH values of 5, and pH effects were studied within the range of 3–7. When studying the effects of initial metal concentrations, the highest experimental removal yields achieved for Cu²⁺, Ni²⁺ and Cd²⁺ ions were 97.10, 50.94 and 64.61 %, respectively. The maximum biosorption capacities obtained by the Langmuir isotherm model for the biosorptions of Cu²⁺, Ni²⁺ and Cd²⁺ ions by alginate-immobilised C. sorokiniana were found to be 179.90, 86.49 and 164.50 mg/g biosorbent, respectively. The experimental data followed pseudo-second-order kinetics. At an initial metal concentration of 25 mg/L, immobilised algae could be used in at least 5 successive biosorption–desorption cycles. SEM and EDS analyses revealed that the metals bonded to the biosorbent. Bi- and multi-metal systems of Cu²⁺, Ni²⁺ and Cd²⁺ were investigated at initial metal concentrations of 30, 50 and 100 mg/L. The removal of Cd²⁺ as well as Ni²⁺ in such systems was negatively affected by the presence of Cu²⁺. The removal efficiency for Cu²⁺ in multi-metal systems decreased by 5–7 %, whilst in the cases of Cd²⁺ and Ni²⁺ the efficiencies decreased by up to 30 %. Nevertheless, the results obtained show that alginate-immobilised C. sorokiniana can efficiently remove the metals tested from polluted drinking water sources.     

Heavy metal biosorption potential of a Malaysian Rhodophyte (<Emphasis Type="Italic">Eucheuma denticulatum</Emphasis>) from aqueous solutions

Biosorption is a promising technology for the removal of heavy metals from industrial wastes and effluents. In the present study, biosorption of Pb²⁺, Cu²⁺, Fe²⁺ and Zn²⁺ onto the dried biomass of Eucheuma denticulatum (Rhodophyte) was investigated as a function of solution pH, contact time, temperature and initial metal ion concentration. The experimental data were evaluated by Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. The sorption isotherm data followed Langmuir and Freundlich models, and the maximum Langmuir monolayer biosorption capacity was found as 81.97, 66.23, 51.02 and 43.48 mg g^?1 for Pb²⁺, Cu²⁺, Fe²⁺ and Zn²⁺, respectively. The sorption kinetic data followed pseudo-second-order and intraparticle diffusion models. Thermodynamic study revealed feasible, spontaneous and endothermic nature of the sorption process. Fourier transform infrared analysis showed the presence of amine, aliphatic, carboxylate, carboxyl, sulfonate and ether groups in the cell wall matrix involved in metal biosorption process. A total of nine error functions were applied in order to evaluate the best-fitting models. We strongly suggest the analysis of error functions for evaluating the fitness of the isotherm and kinetic models. The present work shows that E. denticulatum can be a promising low-cost biosorbent for removal of the experimental heavy metals from aqueous solutions. Further study is warranted to evaluate its potential for the removal of heavy metals from the real environment.     

Biosorption characteristics of heavy metals (Ni2+, Zn2+, Cd2+, Pb2+) from aqueous solution by Hizikia fusiformis

Heavy metal ions (Pb²⁺, Cd²⁺, Ni²⁺, and Zn²⁺) were biosorbed by brown seaweed (Hizikia fusiformis), which was collected from Jeju Island of South Korea. The metal adsorption capacity of H. fusiformis improved significantly by washing with water or by base or acid treatments. The maximum sorption by NaOH-pretreated biomass was observed near a slightly acidic pH (pH 4?6) for Pb²⁺, Cd²⁺, Ni²⁺, and Zn²⁺. This result suggests that the treatment of H. fusiformis biomass with NaOH helped increase the functional forms of carboxylate ester units. Kinetic data showed that the biosorption occurred rapidly during the first 60 min, and most of the heavy metals were bound to the seaweed within 180 min. The maximum metal adsorption capacities assumed by a Langmuir model were on the order of Pb²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺. Equilibrium adsorption data for the heavy metal ions could fit well in the Langmuir model with regression coefficients R ² > 0.97.     

The role of microalgae and their carbonic anhydrase on the biological dissolution of limestone

This study aims to investigate the effect of microalgae and their carbonic anhydrase (CAex) on limestone dissolution. The dynamics of Ca²⁺ and Mg²⁺ release, the model for the amount of Mg²⁺ released and biological cumulative effect time by the microalgae Chlamydomonas reinhardtii (CR) and Chlorella pyrenoedosa (CP), and the algal stable carbon isotopic composition (δ¹³C) in the presence and absence of the membrane-impermeable CAex inhibitor acetazolamide (AZ) were compared in a medium containing limestone. The amount of Mg²⁺ released from the limestone in the treatment without AZ was more than that with AZ during the logarithmic phase. The amounts of Mg²⁺ release unit algal biomass and unit time in CR and CP were 3.37 × 10^?4 and 2.44 × 10^?4 mg/μg days in the treatment without AZ, respectively, and only 1.99 × 10^?4 and 2.19 × 10^?4 mg/μg days in the treatment with AZ, respectively. The biological dissolution of the algae increased with increasing algal CAex activity. The variation of Ca²⁺ was influenced by reprecipitation, and the algal limestone dissolution cannot be shown distinctly. The CAex of the microalgae may be beneficial for CaCO₃ reprecipitation, and the δ¹³C values of the algal cells with AZ were lower than those without AZ. Therefore, AZ not only can inhibit limestone dissolution by inhibiting microalgal growth, but also can reduce limestone dissolution by decreasing CAex catalysis. The results suggest the important influence of microalgae and their CAex on the biokarst process.     

Biosorption an innovative tool for bioremediation of metal-contaminated municipal solid waste leachate: optimization and mechanisms exploration

Municipal solid waste poses a risk on surrounding environment and public health, mainly because of unscientific disposal and shortage of facilities for proper handling and recycling of leachate. This research article objective is to pinpoint the indigenous fungal isolates of waste leachate samples. Therefore, we carried out biosorption of Cd²⁺ tested the applicability by applying indigenous fungal isolates. The limited number of fungal isolates was found based on their ability for biosorption of Cd²⁺ metal. The fungal strains Trichoderma sp., Aspergillus niger and Aspergillus flavus were reported as potential strains for metal exclusion ability from the leachate. Among them, the Trichoderma sp. was found as excellent fungal agent for Cd²⁺ absorption. The optimum pH was 5.5 ± 1, temperature 45 °C, and spore concentration 10^?5 to achieve the maximum biosorption, and 35 days of incubation period were required by three strains. The maximum metal biosorption achieved was comparable for the three isolates: 56.34% by Trichoderma sp., 44.74 and 42.04% by A. niger and A. flavus, respectively. Concluding, the further intending application to identified potentially fungal isolates is able to improve the efficiency of metal biosorption. These strains are recommended for development of consortia could become a best technique for MSW leachate treatment if its reliability and applicability should be verified prior to technology acceptance.     

Habitat disturbance and marina development: An assessment of ecological effects. I. Changes in primary production due to dredging and marina construction

Potential impacts on primary production were estimated for an 800-slip marina previously planned for Davids Island, located in the extreme western portion of Long Island Sound, New York. Macroalgal and microalgal production in the area of the proposed marina was analyzed on the basis of six depth zones ranging from an existing seawall (at about +2.2 m MLW) seaward to a depth of ?2.4 m MLW. Productivity measurements were based on in situ ¹⁴C uptake studies, chlorophyll a determinations, and varying light exposures within the euphotic zone that were the estimate of daily production calculated for eight dominant macroalgae and microalgae, and summed to estimate existing production in the proposed marina. Similarly, post-construction production was estimated by applying the calculated daily production to the appropriate areas of hard substrate (breakwater, pilings, etc.) in the euphotic zone. Pre- and post-construction macroalgal production values were 50,608 and 42,152 g C d^?1, respectively. This represents a 17% reduction in macroalgal production. It should be noted, however, that production on the seafloor of the marina was not accounted for. Consquently, reductions in macroalgal production that might occur are likely overestimated. Microalgal production constituted less than 3% of total primary production in the nearshore areas of Davids Island. The pre- and post-construction microalgal production values were 1,542 and 743 g C d^?1, respectively. This represents a 48% reduction in microalgal production in unconsolidated sediment. However, micoalgal production would likely occur on hard substrates in the marina. Overall, pre- and post-construction estimates of primary production were remarkably similar, suggesting that production on hard substrates in the marina would compensate for lost production from deepening of the nearshore zone during construction. *** DIRECT SUPPORT *** A01BY074 00012     

CO<Subscript>2</Subscript>-assisted removal of nutrients from municipal wastewater by microalgae <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Scenedesmus obliquus</Emphasis>

Axenic culture of microalgae Chlorella vulgaris ATCC^® 13482 and Scenedesmus obliquus FACHB 417 was used for phycoremediation of primary municipal wastewater. The main aim of this study was to measure the effects of normal air and CO₂-augmented air on the removal efficacy of nutrients (ammonia N and phosphate P) from municipal wastewater by the two microalgae. Batch experiments were carried out in cylindrical glass bottles of 1 L working volume at 25 °C and cool fluorescent light of 6500 lux maintaining 14/10 h of light/dark cycle with normal air supplied at 0.2 L min^?1 per liter of the liquid for both algal strains for the experimental period. In the next set of experiments, the treatment process was enhanced by using 1, 2 and 5% CO₂/air (vol./vol.) supply into microalgal cultures. The enrichment of inlet air with CO₂ was found to be beneficial. The maximum removal of 76.3 and 76% COD, 94.2 and 92.6% ammonia, and 94.8 and 93.1% phosphate after a period of 10 days was reported for C. vulgaris and S. obliquus, respectively, with 5% CO₂/air supply. Comparing the two microalgae, maximum removal rates of ammonia and phosphate by C. vulgaris were 4.12 and 1.75 mg L^?1 day^?1, respectively, at 5% CO₂/air supply. From kinetic study data, it was found that the specific rates of phosphate utilization (q _phsophate) by C. vulgaris and S. obliquus at 5% CO₂/air supply were 1.98 and 2.11 day^?1, respectively. Scale-up estimation of a reactor removing phosphate (the criteria pollutant) from 50 MLD wastewater influent was also done.     

Sorption of trace metals on calcite: Applicability of the surface precipitation model

Published Sorption isotherm data of Cd²⁺, Mn²⁺, Zn²⁺, and Co²⁺ on calcite are adequately described by the surface precipitation model which was originally developed by FArley et al. (1985) for the sorption of cations on metal oxides. In addition to monolayer adsorption, the model accounts for the formation of a surface phase with a composition that is described by a solid solution having as end members the sorbent calcium carbonate mineral and a pure carbonate precipitate of the sorbing trace metal. The model thus specifies a continuum between adsorption and precipitation. This feature is supported in the literature by observations on the reaction kinetics and the amount of surface coverage during trace metal sorption on calcite. The apparent adsorption constants of these trace metals, as derived from the model, can be ranked according to the degree to which their ionic radii match the ionic radius of Ca²⁺.     

Effet de l'agrégation sur le transport de la kaolinite recouverte d'acide humique à travers un sable de quartz d'origine naturelleAggregation effect on the transport of humic-coated kaolinite colloids through a natural quartz sand

To evaluate the risk of contaminant transport by mobile colloids, it is necessary to understand how colloids and associated pollutants behave during their migration through uncontaminated soil or groundwater. In this study, we investigated the influence of aggregation induced by Ca²⁺ and trace metals (Pb²⁺, Cu²⁺) concentrations on the transport of humic-coated kaolinite colloids through a natural quartz sand at pH=4. Adsorbed divalent cations reduce the colloids surface charge and thereby induce aggregation and deposition in porous media. To cite this article: R. Ait Akbour et al., C. R. Geoscience 334 (2002) 981–985.     

The impacts of common ions on the adsorption of heavy metal

Researches on the impact of common ions onto sediments are of great importance for the study of the heavy metal adsorption mechanisms. Considering the surface sediments from the relatively clean reach in the Baotou section of the Yellow River as the adsorbent, this work presents the impacts of common ions (Na⁺, Mg²⁺, K⁺, Ca²⁺, Cl⁻, SO₄ ²⁻, and NH₄ ⁺) on heavy metals (Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺) adsorption. The experimental results reveal that the adsorptive capacities of the heavy metals are controlled by different adsorption mechanisms in different ion concentration ranges. With the increase of the ionic strength, the adsorption of the heavy metals increases for the compression of the electric double layer, whereas decreases for the decreasing of the ionic activities of the heavy metals. The competitive adsorption and complexations between the heavy metals and common ions are also important factors controlling the heavy metal adsorption. According to the experimental results and the real concentration of common ions in the Baotou section of the Yellow River, the increase of the concentrations of Na⁺, Mg²⁺, K⁺, and Ca²⁺ would cause the increase of Zn²⁺ adsorption and reduce the Zn pollution. The NH₄ ⁺ from the industrial discharge of the tributaries has a strong impact on the heavy metal adsorption.     

Biosorption of cadmium(II), lead(II) and cobalt(II) from aqueous solution by biochar from cones of larch (<Emphasis Type="Italic">Larix decidua</Emphasis> Mill. <Emphasis Type="Italic">subsp. decidua</Emphasis>) and spruce (<Emphasis Type="Italic">Picea abies</Emphasis> L. H. Karst)

Because of their physicochemical properties, biochars can be used as sorption materials for removal of toxic substances. The purpose of the present study was to determine whether biochar obtained from cones of larch (Larix decidua Mill. subsp. decidua) and spruce (Picea abies L. H. Karst) could be used as a sorbent for Cd²⁺, Pb²⁺ and Co²⁺ in aqueous solutions. So far, this feedstock had not been tested in this respect. The material was subjected to pyrolysis at 500 and 600 °C for the duration of 5, 10 and 15 min. The obtained pyrolysates were found to differ in terms of pH and the contents of the essential macroelements. The different values of these parameters were determined for varying temperature, duration of the pyrolysis process and type of feedstock. Sorption capacities of the biochars for removal of Cd²⁺, Pb²⁺ and Co²⁺ were examined using simulated contamination of aqueous solutions with salts of these metals. The findings showed the highest, nearly complete, removal for Pb²⁺ were maximum 99.7%, and almost three times lower value for Cd²⁺ and Co²⁺ (respectively, 35.7 and 24.8%). It was demonstrated that pyrolysis of conifer cones produced optimum sorption capacities when the process was conducted at a temperature of 500 °C for the duration of 5 min. It was shown that products of spruce cone pyrolysis were characterized by better sorption capacity in comparison with products of larch cone pyrolysis. The properties of conifer cone biochar create the possibility of using it as an adsorbent in water and wastewater treatment as well as in production of filters and activated carbon.     

Adsorption characteristics of phenol and heavy metals on biochar from <Emphasis Type="Italic">Hizikia fusiformis</Emphasis>

The objective of the present study is to evaluate the absorption efficacy of H. fusiformis biochar (HFB) for the removal of phenol and heavy metals from single and mixed solute systems of these species under different experimental conditions. The effects of contact time, pH change, initial phenol concentration, and heavy metal concentration on the adsorption capacity of HFB were investigated. The kinetics and equilibrium models of sorption of the components of the single and mixed solute systems on HFB were also studied. The experimental data were fitted to kinetic and equilibrium models. The batch experiments revealed that 360 min of contact time was sufficient to achieve equilibrium for the adsorption of both phenol and heavy metals. The adsorption of phenol and nickel by HFB followed the pseudo-second-order kinetic model, which was quite adequate for describing the adsorption mechanism. The equilibrium data for the adsorption of phenol and heavy metals fit well to the Langmuir model with regression coefficients of R ² > 0.819. The maximum Langmuir adsorption capacities were 10.39, 12.13, 22.25, 2.24, 2.89, and 22.03 mg/g for phenol, Ni²⁺, Zn²⁺, Cu²⁺, Pb²⁺, and Cd²⁺, respectively. Moreover, HFB exhibited optimal sorption under slightly acidic conditions at pH 6. The HFB used in the present study exhibited higher adsorption capacity for the removal of phenol and heavy metals from aqueous solutions compared to documented sorbents. These results demonstrate that HFB is potentially useful for alleviating the harmful effects of phenol and heavy metal in wastewater treatment systems.     

Biosorption of Pb, Cd, Cu and Zn from the wastewater by treated Azolla filiculoides with H2O2/MgCl2

The adsorption of heavy metals onto treated Azolla filiculoides by H₂O₂/MgCl₂, as a cosmopolitan free-floating waterfern, was investigated from aqueous solutions in the batch biosorption experiments. The maximum uptake capacities of the collected Azolla from rice field at the optimal conditions for Pb, Cd, Cu and Zn ions were approximately 228, 86, 62 and 48 mg/g (dry Azolla), respectively. On the other hand, the maximum uptake capacities of the collected Azolla from the Anzali International Wetland in the north part of Iran at the same conditions for these heavy metals were about 124, 58, 33 and 34 mg/g (dry Azolla), respectively. Such decrease of uptakes is due to the pollution of Anzali International Wetland, which reduces the capacity uptake of metals. The recovery of biosorbed heavy metals from the rice field Azolla was carried out by HCl and NaCl desorbents that the recovery of 64–86% and 51–72% was occurred, respectively.     

氧化亚铁硫杆菌促进金川铜镍硫化矿尾矿砂提取有价金属实验研究

金川铜镍硫化矿尾矿砂数量巨大,其中Ni、Cu和Co等有价金属种类较多,含量较为丰富,蕴含着巨大的经济价值。本文研究了氧化亚铁硫杆菌对金川铜镍尾矿砂提取有价金属效果的影响,在选取金川新尾矿库中心钻孔尾矿砂样品与氧化亚铁硫杆菌作用不同时间的基础上进行化学酸溶,利用电感耦合等离子体发射光谱仪(ICP-AES)分析了溶液中Cu²⁺、Ni²⁺、Co²⁺含量,并通过离子浸出率来表征微生物对尾矿中有价金属提取的影响效果。结果表明,尾矿砂直接化学酸溶后Cu²⁺、Ni²⁺浸出率分别为73.78%和69.87%,Co²⁺浸出率仅为39.57%;而氧化亚铁硫杆菌先与尾矿砂作用后再进行硫酸酸溶,其Cu²⁺、Ni²⁺总浸出率均可达到90%以上,Co²⁺总浸出率也可达到70%以上。实验结果证明氧化亚铁硫杆菌的参与促进了尾矿砂中Cu²⁺、Ni²⁺、Co²⁺的浸出。     

Aqueous cadmium uptake by calcite: a stirred flow-through reactor study

Uptake of cadmium ions from solution by a natural Mg-containing calcite was investigated in stirred flow-through reactor experiments. Input NaCl solutions were pre-equilibrated with calcite (pH 8.0) or not (pH 6.0), prior to being spiked with CdCl₂. For water residence times in the reactor less than 0.5 h, irreversible uptake of Cd by diffusion into the bulk crystal had a minor effect on the measured cadmium breakthrough curves, hence allowing us to quantify “fast” Cd²⁺ adsorption. At equal aqueous activities of Cd²⁺, adsorption was systematically lower for the pre-equilibrated input solutions. The effect of variable solution composition on Cd²⁺ adsorption was reproduced by a Ca²⁺-Cd²⁺ cation exchange model and by a surface complexation model for the calcite-aqueous solution interface. For the range of experimental conditions tested, the latter model predicted binding of aqueous Ca²⁺ and Cd²⁺ to the same population of carbonate surface sites. Under these circumstances, both adsorption models were equivalent. Desorption released 80 to 100% of sorbed cadmium, confirming that fast uptake of Cd²⁺ was mainly due to binding at surface sites. Slow, irreversible cadmium uptake by the solid phase was measured in flow-through reactor experiments with water residence times exceeding 0.7 h. The process exhibited first-order kinetics with respect to the concentration of adsorbed Cd²⁺, with a linear rate constant at 25°C of 0.03 h⁻¹. Assuming that diffusion into the calcite lattice was the mechanism of slow uptake, a Cd²⁺ solid-state diffusion coefficient of 8.5×10⁻²¹ cm² s⁻¹ was calculated. Adsorbed Cd²⁺ had a pronounced effect on the dissolution kinetics of calcite. At maximum Cd²⁺ surface coverage (∼10⁻⁵ mol m⁻²), the calcite dissolution rate was 75% slower than measured under initially cadmium-free conditions. Upon desorption of cadmium, the dissolution rate increased again but remained below its initial value. Thus, the calcite surface structure and reactivity retained a memory of the adsorbed Cd²⁺ cations after their removal.     

ZH型重金属螯合纤维对水溶液中Sr2+的吸附行为

研究了ZH型重金属螯合纤维对水溶液中Sr~(2+)的吸附行为,考察了pH值、纤维加入量、Sr~(2+)初始浓度、作用时间等对吸附行为的影响,并采用SEM、EDS和FTIR等现代分析测试手段探讨了ZH型重金属螯合纤维对Sr~(2+)的吸附机制。结果表明,在pH值为7.0、纤维加入量为2.0 g/L、Sr~(2+)初始质量浓度为50 mg/L的条件下,纤维对Sr~(2+)的吸附在4 h左右基本达到平衡。实验条件下ZH型重金属螯合纤维对Sr~(2+)的最大吸附量可达26.22 mg/g。等温吸附拟合结果表明,ZH型重金属螯合纤维对Sr~(2+)的吸附可能是以单分子层为主的单分子层和多分子层吸附共同作用的结果。纤维对Sr~(2+)的动力学吸附过程符合准二级动力学模型。红外光谱分析表明Sr~(2+)与纤维上—NH_2和—COOH等基团进行配位络合从而吸附在纤维表面,—CH_2—和C=CH_2等基团参与此吸附过程。能谱分析表明Sr~(2+)与纤维上Na~+和Ca~(2+)还存在着离子交换作用。     

Biosorption optimization and equilibrium isotherm of industrial dye compounds in novel strains of microscopic fungi

The aim of this study was to evaluate the biosorption capacity of selected strains of microscopic fungi. We optimized the biosorption process and used the Freundlich isotherm for three strains: H. haematococca BwIII43, K37 and T. harzianum BsIII33 to describe the biosorption equilibrium of anthraquinone dye, Alizarin Blue Black B (ABBB) and alkali lignin (AL). In optimal conditions (1 g of mycelium biomass, pH = 7.0, 28 °C) for ABBB and AL sorption, the live biomass of H. haematococca BwIII43 was characterized by a higher sorption capacity, amounting to 247.47 and 161.00 mg g^?1, respectively. The highest sorption properties toward anthraquinone dye (K _F = 19.96 mg g^?1) were shown for the biomass of H. haematococca K37. In the presence of alkali lignin, the highest sorption capacity and bond strength exhibited the biomass of H. haematococca BwIII43 (K _F = 28.20 mg g^?1, n = 3.46). Effective decolorization of ABBB and AL by the selected strains of microscopic fungi indicated that the biosorption process additionally enhanced the removal of color compounds from the solution.     

Efficient removal of hexavalent chromium from aqueous solutions using autohydrolyzed Scots Pine (Pinus Sylvestris) sawdust as adsorbent

In this work, a low-cost lignocellulosic adsorbent with high biosorption capacity is proposed, suitable for the efficient removal of hexavalent chromium from water and wastewater media. The adsorbent was produced by autohydrolyzing Scots Pine (Pinus Sylvestris) sawdust. The effect of the autohydrolysis conditions, i.e., pretreatment time and temperature, on hexavalent chromium biosorption was investigated using energy-dispersive X-ray spectroscopy (EDS) and UV–visible spectrophotometry. The Freundlich, Langmuir, Sips, Radke-Prausnitz, Modified Radke-Prausnitz, Tóth, UNILAN, Temkin and Dubinin-Radushkevich adsorption capacities and the rate constant values for pseudo-first- and pseudo-second-order kinetics indicated that the autohydrolyzed material exhibits significantly enhanced hexavalent chromium adsorption properties comparing with the untreated sawdust. The Freundlich’s adsorption capacity K _F increased from 2.276 to 8.928 (mg g^?1)(L mg^?1)^1/n , and the amount of hexavalent chromium adsorbed at saturation (Langmuir constant q _m) increased from 87.4 to 345.9 mg g^?1, indicating that autohydrolysis treatment at 240 °C for 50 min optimizes the adsorption behavior of the lignocellulosic material.     

Identification of hydrogeochemical processes and pollution sources of groundwater resources in the Marand plain,northwest of Iran

The main aims of the present study are to identify the major factors affecting hydrogeochemistry of groundwater resources in the Marand plain, NW Iran and to evaluate the potential sources of major and trace elements using multivariate statistical analysis such as hierarchical clustering analysis (HCA) and factor analysis (FA). To achieve these goals, groundwater samples were collected in three sampling periods in September 2013, May 2014 and September 2014 and analyzed with regard to ions (e.g., Ca²⁺, Mg²⁺, Na⁺ and K⁺, HCO₃ ^?, SO₄ ^2?, Cl^?, F^? and NO₃ ^?) and trace metals (e.g., Cr, Pb, Cd, Mn, Fe, Al and As). The piper diagrams show that the majority of samples belong to Na–Cl water type and are followed by Ca–HCO₃ and mixed Ca–Na–HCO₃. Cross-plots show that weathering and dissolution of different rocks and minerals, ion exchange, reverse ion exchange and anthropogenic activities, especially agricultural activities, influence the hydrogeochemistry of the study area. The results of the FA demonstrate that 6 factors with 81.7% of total variance are effective in the overall hydrogeochemistry, which are attributed to geogenic and anthropogenic impacts. The HCA categorizes the samples into two clusters. Samples of cluster C1, which appear to have higher values of some trace metals like Pb and As, are spatially located at the eastern and central parts of the plain, while samples of cluster C2, which express the salinization of the groundwater, are situated mainly westward with few local exceptions.     

Occurrence of 3-hydroxy acids in microalgae and cyanobacteria and their geochemical significance

3-Hydroxy acids were detected in pure cultured microalgae: Chlorophyta—Chlamydomonas reinhardtii and Chlorella pyrenoidosa and Rhodophyta—Cyanidium caldarium (two strains), and cyanobacteria (Cyanophyta)—Anacystis nidulans, Phormidium foveolarum, Anabaena variabilis and Oscillatoria sp. Normal and branched (iso and anteiso) 3-hydroxy acids in the ranges of C₈-C₂₆ were found in all the samples studied at concentrations ranging from 0.036 to 2.3 and 0.000 to 0.12 mg g^?1 of dry sample, respectively. The major constituents were generally even-carbon numbered normal acids with carbon chain lengths below C₂₀. Microalgae and cyanobacteria may be the important sources of 3-hydroxy acids in natural environments.