Time‐transgressive tunnel‐valley infill revealed by a three‐dimensional sedimentary model,Hamburg, north‐west Germany

Deep, elongated incisions, often referred to as tunnel valleys, are among the most characteristic landforms of formerly glaciated terrains. It is commonly thought that tunnel valleys were formed by meltwater flowing underneath large ice sheets. The sedimentary infill of these features is often highly intricate and therefore difficult to predict. This study intends to improve the comprehension of the sedimentology and to establish a conceptual model of tunnel‐valley infill, which can be used as a predictive tool. To this end, the densely sampled, Pleistocene tunnel valleys in Hamburg (north‐west Germany) were investigated using a dataset of 1057 deep wells containing lithological and geophysical data. The stratigraphic correlations and the resulting three‐dimensional lithological model were used to assess the spatial lithological distributions and sedimentary architecture. The sedimentary succession filling the Hamburg area tunnel valleys can be subdivided into three distinct units, which are distinguished by their inferred depositional proximity to the ice margin. The overall trend of the succession shows a progressive decrease in transport energy and glacial influence through time. The rate of glacial recession appears to have been an important control on the sedimentary architecture of the tunnel‐valley fill. During periods of stagnation, thick ice‐proximal deposits accumulated at the ice margin, while during rapid recession, only a thin veneer of such coarse‐grained sediments was deposited. Ice‐distal and non‐glaciogenic deposits (i.e. lacustrine, marine and terrestrial) fill the remaining part of the incision. The infill architecture suggests formation and subsequent infill of the tunnel valleys at the outer margin of the Elsterian ice sheet during its punctuated northwards recession. The proposed model shows how the history of ice‐sheet recession determines the position of coarse‐grained depocentres, while the post‐glacial history controls the deposition of fines through a progressive infill of remnant depressions.     

Litho- and chronostratigraphy of the Late Weichselian in Vendsyssel, northern Denmark, with special emphasis on tunnel-valley infill in relation to a receding ice margin

Lithostratigraphy and chronostratigraphy of samples from 18 deep boreholes in Vendsyssel have resulted in new insight into the Late Weichselian glaciation history of northern Denmark. Prior to the Late Weichselian Main advance c. 23–21 kyr BP, Vendsyssel was part of an ice‐dammed lake where the Ribjerg Formation was deposited c. 27–23 kyr BP. The timing of the Late Weichselian deglaciation is well constrained by the Main advance and the Lateglacial marine inundation c. 18 kyr BP, and thus spans only a few millennia. Rapid deposition of more than 200 m of sediments took place mainly in a highly dynamic proglacial and ice‐marginal environment during the overall ice recession. Mean retreat rates have been estimated as 45–50 m/yr in Vendsyssel with significantly higher retreat rates between periods of standstill and re‐advance. The deglaciation commenced in Vendsyssel c. 20 kyr BP, and the Troldbjerg Formation was deposited c. 20–19 kyr BP in a large ice‐dammed lake in front of the receding ice sheet, partly as glaciolacustrine sediments and partly as rapid and focused sedimentation in prominent ice‐contact fans, which make up the Jyske Ås and Hammer Bakker moraines. In the northern part of central Vendsyssel, at least four generations of north–south orientated tunnel valleys are identified, each generation related to a recessional ice margin. This initial deglaciation was interrupted by a major re‐advance from the east c. 19 kyr BP, which covered most of Vendsyssel. An ice‐dammed lake formed in front of the ice sheet as it retreated towards the east; the Morild Formation was deposited here c. 19–18 kyr BP. Related to this stage of deglaciation, eight ice‐marginal positions have been identified based on the distribution of large tunnel‐valley systems and pronounced recessional moraines. The Morild Formation consists of glaciolacustrine sediments, including the sediment infill of more than 190 m deep tunnel valleys, as well as the sediments in recessional moraines, which were formed as ice‐contact sedimentary ridges, possibly in combination with glaciotectonic deformation. The character of the tunnel‐valley infill sediments was determined by proximity to the ice margin. During episodes of rapid retreat of the ice margin, tunnel valleys were quickly abandoned and filled with fine‐grained sediments in a distal setting. During slow retreat of the ice margin, tunnel valleys were filled in an ice‐proximal environment, and the infill consists of alternating layers of fine‐ to coarse‐grained sediments. At c. 18 kyr BP, Vendsyssel was inundated by the sea, when the Norwegian Channel Ice Stream broke up, and a succession of marine sediments (Vendsyssel Formation) was deposited during a forced regression.     

Minor end moraines of the Wisconsin Valley Lobe, north-central Wisconsin, USA

Approximately 35 parallel, discontinuous glacial ridges occur in an area of about 100 km² in north‐central Wisconsin. The ridges are located between about 6 and 15 km north (formerly up‐ice) of the maximum extent of the Wisconsin Valley Lobe of the Laurentide Ice Sheet. The ridges are between 1 and 4 m high, up to 1 km long, and spaced between 30 and 80 m apart. They are typically asymmetrical with a steep proximal (ice‐contact) slope and gentle distal slope. The ridges are composed primarily of subglacial till on their proximal sides and glacial debris‐flow sediment on the distal sides. In some ridges the till and debris‐flow sediment are underlain by sorted sediment that was deformed in the former direction of ice flow. We interpret the ridges to be recessional moraines that formed as the Wisconsin Valley Lobe wasted back from its maximum extent, with each ridge having formed by a sequence of (1) pushing of sorted ice‐marginal sediment, (2) partial overriding by the glacier and deposition of subglacial till on the proximal side of the ridge, and (3) deposition of debris‐flow sediment on the distal side of the ridge after the frozen till at the crest of the ridge melted. The moraines are similar to annual recessional moraines described at several modern glaciers, especially the northern margin of Myrdalsjokull, Iceland. Thus, we believe the ridges probably formed as a result of minor winter advances of the ice margin during deglaciation. Based on this assumption, we calculate the net rate of ice‐surface lowering of the Wisconsin Valley Lobe during the period when the moraines formed. Various estimates of ice‐surface slope and rates of ice‐margin retreat yield a wide range of values for ice‐surface lowering (1.7–14.5 m/yr). Given that ablation rates must exceed those of ice‐surface lowering, this range of values suggests relatively high summer temperatures along the margin of the Wisconsin Valley Lobe when it began retreating from its maximum extent. In addition, the formation of annual moraines indicates that the glacier toe was thin, the ice surface was clean, and the ice margin experienced relatively cold winters.     

Late Ordovician climbing‐dune cross‐stratification: a signature of outburst floods in proglacial outwash environments?

Climbing dune‐scale cross‐statification is described from Late Ordovician paraglacial successions of the Murzuq Basin (SW Libya). This depositional facies is comprised of medium‐grained to coarse‐grained sandstones that typically involve 0·3 to 1 m high, 3 to 5 m in wavelength, asymmetrical laminations. Most often stoss‐depositional structures have been generated, with preservation of the topographies of formative bedforms. Climbing‐dune cross‐stratification related to the migration of lower‐flow regime dune trains is thus identified. Related architecture and facies sequences are described from two case studies: (i) erosion‐based sandstone sheets; and (ii) a deeply incised channel. The former characterized the distal outwash plain and the fluvial/subaqueous transition of related deltaic wedges, while the latter formed in an ice‐proximal segment of the outwash plain. In erosion‐based sand sheets, climbing‐dune cross‐stratification results from unconfined mouth‐bar deposition related to expanding, sediment‐laden flows entering a water body. Within incised channels, climbing‐dune cross‐stratification formed over eddy‐related side bars reflecting deposition under recirculating flow conditions generated at channel bends. Associated facies sequences record glacier outburst floods that occurred during early stages of deglaciation and were temporally and spatially linked with subglacial drainage events involving tunnel valleys. The primary control on the formation of climbing‐dune cross‐stratification is a combination between high‐magnitude flows and sediment supply limitations, which lead to the generation of sediment‐charged stream flows characterized by a significant, relatively coarse‐grained, sand‐sized suspension‐load concentration, with a virtual absence of very coarse to gravelly bedload. The high rate of coarse‐grained sand fallout in sediment‐laden flows following flow expansion throughout mouth bars or in eddy‐related side bars resulted in high rates of transfer of sands from suspension to the bed, net deposition on bedform stoss‐sides and generation of widespread climbing‐dune cross‐stratification. The later structure has no equivalent in the glacial record, either in the ancient or in the Quaternary literature, but analogues are recognized in some flood‐dominated depositional systems of foreland basins.     

Marginal formation of De Geer moraines and their implications to the dynamics of grounding‐line recession

De Geer moraine ridges occur in abundance in the coastal zone of northern Sweden, preferentially in areas with proglacial water depths in excess of 150 m at deglaciation. From detailed sedimentological and structural investigations in machine‐dug trenches across De Geer ridges it is concluded that the moraines formed due to subglacial sediment advection to the ice margin during temporary halts in grounding‐line retreat, forming gradually thickening sediment wedges. The proximal part of the moraines were built up in submarginal position as stacked sequences of deforming bed diamictons, intercalated with glaciofluvial canal‐infill sediments, whereas the distal parts were built up from the grounding line by prograding sediment gravity‐flow deposits, distally interfingering with glaciolacustrine sediments. The rapid grounding‐line retreat (ca. 400 m yr^?1) was driven by rapid calving, in turn enhanced by fast iceflow and marginal thinning of ice due to deforming bed conditions. The spatial distribution of the moraine ridges indicates stepwise retreat of the grounding line. It is suggested that this is due to slab and flake calving of the ice cliff above the waterline, forming a gradually widening subaqueous ice ledge which eventually breaks off to a new grounding line, followed by regained sediment delivery and ridge build‐up. Copyright © 2005 John Wiley & Sons, Ltd.     

Stratigraphic architecture and sedimentology of a Late Pleistocene subaqueous moraine complex,southwest Ireland

Glacigenic sediments exposed in coastal cliffs cut through undulatory terrain fronting the Last Glacial Maximum laterofrontal moraine at Waterville on the Iveragh Peninsula, southwest Ireland, comprise three lithofacies. Lithofacies 1 and 2 consist of interdigitated, offlapping and superimposed ice‐proximal subaqueous outwash and stacked sequences of cohesionless and cohesive subaqueous debris flows, winnowed lag gravels and coarse‐grained suspension deposits. These are indicative of sedimentation in and around small grounding line fans that prograded from an oscillating glacier margin into a proglacial, interlobate lake. Lithofacies 3 comprises braided river deposits that have undergone significant syn‐sedimentary soft‐sediment deformation. Deposition was likely related to proglacial outwash activity and records the reduction of accommodation space for subaqueous sedimentation, either through the lowering of proglacial water levels or due to basin infilling. The stratigraphic architecture and sedimentology of the moraine at Waterville highlight the role of ice‐marginal depositional processes in the construction of morphostratigraphically significant ‘end moraine’ complexes in Great Britain and Ireland. Traditional ‘tills’ in these moraines are often crudely stratified diamictons and gravelly clinoforms deposited in ice‐proximal subaqueous and subaerial fans. Copyright © 2011 John Wiley & Sons, Ltd.     

Submarine debris flow deposits from the Upper Carboniferous Dwyka Tillite Formation in the Kalahari Basin, South Africa

ABSTRACT Four types of sediment gravity flow deposits occur interbedded with rhythmite shale, siltsone, mudstone and minor diamictite in a 230-m thick Carboniferous glacial sequence. Shear and plug zones are present in the cohesive debris flow deposits which have a diamictic texture. The high-density turbidity flow deposits which consist of coarse to medium-grained clastics, are characterized by both normal and reverse grading. The medium to fine-grained low-density turbidity flow deposits show normal grading and consist of Bouma units A, B, D and E. Deposition occurred by gravity flow, suspension settling and minor basal melt-out during ice retreat along the southern margin of the Kalahari Basin. Immediately basinwards of the ice grounding line a proximal diamictite facies consisting predominantly of cohesive and high-density turbidity flow deposits, and minor melt-out tills formed. A distal sedimentary facies of graded sandstone and siltstone units deposited by low-density turbidity flows and suspension settling of muds with ice-rafted debris is located basinwards.     

Architecture of tunnel valleys in the southeastern North Sea: new insights from high-resolution seismic imaging

Tunnel valleys are assumed to form near the margin of ice sheets. Hence, they can be used to reconstruct the dynamics of former ice margins. The detailed formation and infill of tunnel valleys, however, are still not well understood. Here, we present a dense grid of high-resolution 2D multi-channel reflection seismic data from the German sector of the southeastern North Sea imaging tunnel valleys in very great detail. Three tunnel valley systems were traced over distances ranging between 11 and 21 km. All tunnel valleys are completely filled and buried. They differ in incision depth, incision width and number of incisions. The tunnel valleys cut 130–380 m deep into Neogene, Palaeogene and Cretaceous sediments; they show a lower V-shaped and an upper U-shaped morphology. For individual tunnel valleys, the overall incision direction ranges from east–west to northeast–southwest. Two tunnel valleys intersect at an oblique angle without reuse of the thalweg. These valleys incise into a pre-existing glaciotectonic complex consisting of thrust sheets in the northwest of the study area. The analysis of the glaciotectonic complex and the tunnel valleys leads us to assume that we identified several marginal positions of (pre-)Elsterian ice lobes in the southeastern North Sea.     

Turbidite deposition on the glacially influenced,canyon‐dominated Southwest Grand Banks Slope,Canada

The deeply dissected Southwest Grand Banks Slope offshore the Grand Banks of Newfoundland was investigated using multiple data sets in order to determine how canyons and intercanyon ridges developed and what sedimentary processes acted on glacially influenced slopes. The canyons are a product of Quaternary ice‐related processes that operated along the margin, such as ice stream outwash and proglacial plume fallout. Three types of canyon are defined based on their dimensions, axial sedimentary processes and the location of the canyon head. There are canyons formed by glacial outwash with aggradational and erosional floors, and canyons formed on the slope by retrogressive failure. The steep, narrow intercanyon ridges that separate the canyons are composite morphological features formed by a complex history of sediment aggradation and degradation. Ridge aggradation occurred as a result of mid to late Quaternary background sedimentation (proglacial plume fallout and hemipelagic settling) and turbidite deposition. Intercanyon ridge degradation was caused mainly by sediment removal due to local slump failures and erosive sediment gravity flows. Levée‐like deposits are present as little as 15 km from the shelf break. At 30 km from the shelf, turbidity currents spilled over a 400 m high ridge and reconfined in a canyon formed by retrogressive failure, where a thalweg channel was developed. These observations imply that turbidity currents evolved rapidly in this slope‐proximal environment and attained flow depths of hundreds of metres over distances of a few tens of kilometres, suggesting turbulent subglacial outwash from tunnel valleys as the principal turbidity current‐generating mechanism.     

西藏申扎地区拉嘎组岩相/沉积相分析

通过详细测制西藏申扎县扎扛-木纠错石炭二叠系剖面,查明了拉嘎组的岩石类型、组合及沉积环境。申扎地区的拉嘎组是以暗色粉砂岩、泥岩等细碎屑岩背景下,发育若干板状、长透镜状及透镜状粗碎屑岩为特征。大部分粗碎屑岩及部分细碎屑岩的分选及磨圆很差,成熟度极低,岩性显示为杂砾岩、杂砂岩,局部地区见有花岗岩漂砾。研究认为,拉嘎组形成于冰缘解冻并后退状态下的近岸冰海沉积环境,其沉积相类型可以分为分支水道与间湾、水下冰水扇、冰碛物与冰筏、滨岸与内陆棚。鉴于其时代可能为早二叠世Sakmarian期,因此,拉嘎组可能是晚古生代冰期消融的产物。拉嘎组沉积相的识别分析对拉萨地块晚古生代的古环境和古地理有重要意义。     

Triassic carbonate submarine fans along the Arabian platform margin, Sumeini Group, Oman

ABSTRACT The Sumeini Group formed along the passive continental margin slope that bounded the northeastern edge of the Arabian carbonate platform. With the initial development of this passive continental margin in Oman during Early to Middle Triassic time (possibly Permian), small carbonate submarine fans of the C Member of the Maqam Formation developed along a distally steepened slope. The fan deposits occur as several discrete lenticular sequences of genetically related beds of coarsegrained redeposited carbonate (calciclastic) sediment within a thick interval of basinal lime mudstone and shale. Repeated pulses of calciclastic sediment were derived from ooid shoals on an adjacent carbonate platform and contain coarser intraclasts eroded from the surrounding slope deposits. Sediment gravity flows, primarily turbidites with lesser debris flows and grain flows, transported the coarse sediments to the relatively deep submarine fans. Channel erosion was a major source of intraformational calcirudite. Two small submarine fan systems were each recurrently supplied with calciclastic sediment derived from point sources, submarine canyons. The northern fan system retrogrades and dies out upsection. The southern fan system was apparently longer-lived; calciclastic sediments in it are more prevalent and occur throughout the section. The proximal portions of this fan system are dominated by channelized beds of calcirudite which represent inner- to mid-fan channel complexes. The distal portions include mostly lenticular, unchannelized beds of calcarenite, apparently mid- to outer-fan lobes. Carbonate submarine fans appear to be rare in the geological record in comparison with more laterally continuous slope aprons of coarse redeposited sediment. The carbonate submarine fans of the C Member apparently formed by the funnelling of coarse calciclastic sediment into small submarine canyons which may have developed due to rift and/or transform tectonics. The alternation of discrete sequences of calciclastic sediment with thick intervals of ‘background’ sediment resulted from either sea-level fluctuations or pulses of tectonic activity.     

Cirque infills in the Khibiny Mountains,Kola Peninsula,Russia — palaeoglaciological interpretations and modern analogues in East Antarctica

We report here on cirque infills mapped in the Khibiny Mountains, Kola Peninsula, Russia. Cirque infills are morainic deposits located near the headwalls of valleys and cirques. Their location and shape, often with concave margins towards the valley side, indicate that they were deposited by ice flowing up‐valley, into the mountains, rather than by local glaciers. We suggest that they formed during the last deglaciation, when Khibiny was a nunatak and Fennoscandian ice sheet lobes extended into valleys and cirques of the massif. The formation of cirque infills is probably more related to ice sheet dynamic factors, occurring when the ice margin retreated from the cirques, than to climate‐driven interruption in the ice‐marginal retreat. Glacial conditions similar to those prevalent when the Khibiny cirque infills were formed, occur today in Antarctica where the ice sheets engulf nunatak ranges. In Heimefrontfjella, Antarctica, the formation of supraglacial moraines at the head of cirques are linked to blue‐ice conditions, indicating locally low accumulation rates, a dry continental climate and sublimation dominated ablation. We suggest that these Antarctic moraines are modern analogues of cirque infills on the Kola Peninsula, and possibly, that the cirque infills may be used as palaeoenvironmental indicators. Copyright © 2007 John Wiley & Sons, Ltd.     

Glacial advance,occupation and retreat sediments associated with multi‐stage ice‐dammed lakes: north‐central Alberta,Canada

Ice sheets that advance upvalley, against the regional gradient, commonly block drainage and result in ice‐dammed proglacial lakes along their margins during advance and retreat phases. Ice‐dammed glacial lakes described in regional depositional models, in which ice blocks a major lake outlet, are often confined to basins in which the glacial lake palaeogeographical position generally remains semi‐stable (e.g. Great Lakes basins). However, in places where ice retreats downvalley, blocking regional drainage, the palaeogeographical position and lake level of glacial lakes evolve temporally in response to the position of the ice margin (referred to here as ‘multi‐stage’ lakes). In order to understand the sedimentary record of multi‐stage lakes, sediments were examined in 14 cored boreholes in the Peace and Wabasca valleys in north‐central Alberta, Canada. Three facies associations (FAI–III) were identified from core, and record Middle Wisconsinan ice‐distal to ice‐proximal glaciolacustrine (FAI) sediments deposited during ice advance, Late Wisconsinan subglacial and ice‐marginal sediments (FAII) deposited during ice‐occupation, and glaciolacustrine sediments (FAIII) that record ice retreat from the study area. Modelling of the lateral extent of FAs using water wells and gamma‐ray logs, combined with interpreted outlets and mapped moraines based on LiDAR imagery, facilitated palaeogeographical reconstruction of lakes and the identification of four major retreat‐phase lake stages. These lake reconstructions, together with the vertical succession of FAs, are used to develop a depositional model for ice‐dammed lakes during a cycle of glacial advance and retreat. This depositional model may be applied in other areas where meltwater was impounded by glacial ice advancing up the regional gradient, in order to understand the complex interaction between depositional processes, ice‐marginal position, and supply of meltwater and sediment in the lake basin. In particular, this model could be applied to decipher the genetic origin of diamicts previously interpreted to record strictly subglacial deposition or multiple re‐advances.     

Regional reconstruction of subglacial hydrology and glaciodynamic behaviour along the southern margin of the Cordilleran Ice Sheet in British Columbia,Canada and northern Washington State,USA

Subglacial landsystems in and around Okanagan Valley, British Columbia, Canada are investigated in order to evaluate landscape development, subglacial hydrology and Cordilleran Ice Sheet dynamics along its southern margin. Major landscape elements include drumlin swarms and tunnel valleys. Drumlins are composed of bedrock, diamicton and glaciofluvial sediments; their form truncates the substrate. Tunnel valleys of various scales (km to 100s km length), incised into bedrock and sediment, exhibit convex longitudinal profiles, and truncate drumlin swarms. Okanagan Valley is the largest tunnel valley in the area and is eroded >300 m below sea level. Over 600 m of Late Wisconsin-age sediments, consisting of a fining-up sequence of cobble gravel, sand and silt fill Okanagan Valley. Landform–substrate relationships, landform associations, and sedimentary sequences are incompatible with prevailing explanations of landsystem development centred mainly on deforming beds. They are best explained by meltwater erosion and deposition during ice sheet underbursts.During the Late-Wisconsin glaciation, Okanagan Valley functioned as part of a subglacial lake spanning multiple connected valleys (few 100s km) of southern British Columbia. Subglacial lake development started either as glaciers advanced over a pre-existing sub-aerial lake (catch lake) or by incremental production and storage of basal meltwater. High geothermal heat flux, geothermal springs and/or subglacial volcanic eruptions contributed to ice melt, and may have triggered, along with priming from supraglacial lakes, subglacial lake drainage. During the underburst(s), sheetflows eroded drumlins in corridors and channelized flows eroded tunnel valleys. Progressive flow channelization focused flows toward major bedrock valleys. In Okanagan Valley, most of the pre-glacial and early-glacial sediment fill was removed. A fining-up sequence of boulder gravel and sand was deposited during waning stages of the underburst(s) and bedrock drumlins in Okanagan Valley were enhanced or wholly formed by this underburst(s).Subglacial lake development and drainage had an impact on ice sheet geometry and ice volumes. The prevailing conceptual model for growth and decay of the CIS suggests significantly thicker ice in valleys compared to plateaus. Subglacial lake development created a reversal of this ice sheet geometry where grounded ice on plateaus thickened while floating valley ice remained thinner (due to melting and enhanced sliding, with significant transfer of ice toward the ice sheet margin). Subglacial lake drainage may have hastened deglaciation by melting ice, lowering ice-surface elevations, and causing lid fracture. This paper highlights the importance of ice sheet hydrology: its control on ice flow dynamics, distribution and volume in continental ice masses.     

A morphometric analysis of tunnel valleys in the eastern North Sea based on 3D seismic data

A 1250 km² 3D seismic volume is used to provide a detailed spatial and geometrical analysis of fifteen Pleistocene tunnel valleys in the Danish North Sea. All the valleys are buried; they are up to 39 km long, 3–4 km wide and up to 350 m deep. The valleys are part of a vast tunnel valley province covering an area of some 0.5 million km² of the formerly glaciated lowland areas of North West Europe. The valleys consist of non‐branching, non‐anastomosing troughs; they exhibit strongly undulating bottom profiles with numerous sub‐basins and thresholds, and are characterised by adverse end slopes. Cross‐cutting relationships and theoretical considerations suggest the occurrence of seven major episodes of valley incision attributed to ice marginal oscillations within a few glacials. Calculations considering the valley end gradients and theoretical ice‐surface profiles suggest that the valleys were formed by pressurised subglacial meltwater erosion. Given a range of theoretical ice‐surface profiles, the adverse end slopes are well beyond the supercooling threshold, which suggests that the water was not in thermal equilibrium with the basal ice and that flow was concentrated in substantial conduits with sufficient mass and flux to maintain water temperature well above the freezing point. Copyright © 2007 John Wiley & Sons, Ltd.     

Anatomy of a subaqueous ice-contact fan and delta complex, Middle Pleistocene, North-west Germany

This paper presents a detailed analysis of the high‐resolution facies architecture of the Middle Pleistocene Porta subaqueous ice‐contact fan and delta complex, deposited on the northern margin of glacial Lake Weser (North‐west Germany). A total of 10 sand and gravel pits and more than 100 wells were examined to document the complex facies architecture. The field study was supplemented with a ground‐penetrating radar survey and a shear‐wave seismic survey. All collected sedimentological and geophysical data were integrated into a high‐resolution three‐dimensional geological model for reconstructing the spatial distribution of facies associations. The Porta subaqueous fan and delta complex consist of three fan bodies deposited on a flat lake‐bottom surface at the margin of a retreating ice lobe. The northernmost fan complex is up to 55 m thick, 6·2 km wide and 6·5 km long. The incipient fan deposition is characterized by high‐energy flows of a plane‐wall jet. Very coarse‐grained, highly scoured jet‐efflux deposits with an elongate plan shape indicate a high Froude number, probably >5. These jet‐efflux sediments are deposited in front of a large ～3·2 km long, up to 1·2 km wide, and up to 25 m deep flute‐like scour, indicating the most proximal erosion and bypass area of the jet that widens and deepens with distance downstream to the region of maximum turbulence (approximately five times the conduit diameter). Evidence for subsequent flow splitting is given by the presence of two marginal gravel fan lobes, deposited in front of 1·3 to 2·5 km long flute‐like scours, that are 0·8 to 1 km wide and 7 to 20 m deep. In response to continued aggradation, small jets developed at the periphery of these bar‐like deposits and filled in the low areas adjacent to the original superelevated regions, locally raising the depositional surface and characterized by large‐scale trough cross‐stratified sand and pebbly sand. The incision of an up to 1·2 km wide and up to 35 m deep channel into the evolving fan is attributed to a catastrophic drainage event, probably related to a lake outburst and lake‐level fall in the range of 40 to 60 m. At the mouth of this channel, highly scoured jet‐efflux deposits formed under hydraulic‐jump conditions during flow expansion. Subsequently, Gilbert‐type deltas formed on the truncated fan margin, recording a second lake‐level drop in the range of 30 to 40 m. These catastrophic lake‐level falls were probably caused by rapid ice‐lobe retreat controlled by the convex‐up bottom topography of the ice valley.     

Seismic stratigraphy records the deglacial history of Jakobshavn Isbræ, West Greenland

Jakobshavn Isbræ is one of the largest ice streams in the Greenland Ice Sheet, presently draining c. 6.5% of the Inland Ice. Here we present high‐resolution Chirp and Sparker sub‐bottom profiles from a seismic survey conducted just outside of the Jakobshavn Isfjord, which provides detailed insight into the glacimarine sedimentary history of the Jakobshavn ice stream during the Holocene. We observe acoustically stratified and homogeneous sediments that drape an irregular substratum and were deposited between ～10 and c. 7.6k cal a BP. The stratified lower units are interpreted as the product of ice‐proximal glacimarine sedimentation deposited rapidly when the grounded ice margin was located close to depositional basins on topographic highs. The upper acoustically homogenous units reflect suspension settling of fine‐grained material and gravitational flows that were extruded from an increasingly unstable ice margin as the ice retreated into the fjord. Proximity to the ice margin and bedrock topography were the dominant controls on sediment accumulation during deglaciation although the 8.2‐ka cooling event probably influenced the position of the ice margin at the fjord mouth. The post‐glacial sedimentary record is characterized by glacimarine and hemipelagic rainout with an increased ice‐rafted detritus fraction that records sedimentation following ice stream retreat into Jakobshavn Isfjord sometime after c. 7.8k cal a BP. Copyright © 2011 John Wiley & Sons, Ltd.     

Controls on sedimentation in distal margin palaeovalleys in the Early Tertiary Alpine foreland basin, south-eastern France

The influence of palaeodrainage characteristics, palaeogeography and tectonic setting are rarely considered as controls on stratigraphic organization in palaeovalley or incised valley systems. This study is an examination of the influence of source region vs. downstream base level controls on the sedimentary architecture of a set of bedrock-confined palaeovalleys developed along the distal margin of the Alpine foreland basin in south-eastern France. Three distinct facies associations are observed within the palaeovalley fills. Fluvial facies association A is mainly dominated by poorly sorted, highly disorganized, clast-to-matrix-supported cobble-to-boulder conglomerates that are interpreted as streamflood deposits. Facies association B comprises mainly yellow siltstones and is interpreted as recording deposition in an estuarine basin environment. Estuarine marine facies association C comprises interstratified estuarine siltstones and clean, well-sorted washover sandstones. The sedimentary characteristics of the valley fill successions are related to the proximity of depositional sites to sediment source areas. Palaeovalleys located proximal to structurally controlled basement palaeohighs are entirely dominated by coarse fluvial streamflood deposits. In contrast, distal palaeovalley segments, which are located several kilometres downstream, contain successions showing upward transition from coarse fluvial facies into estuarine central basin fines, and finally into estuarine-marginal marine facies. Facies distributions suggest that the fluvial deposits form wedge-shaped, downstream-thinning sediment bodies, whereas the estuarine deposits form an upstream-thinning wedge. The vertical stacking of fluvial to estuarine to marginal marine depositional environments records the fluvial aggradation and subsequent transgression of relatively small bedrock-confined river valleys, which drained a rugged, upland terrain. Facies geometries suggest that a fluvial sediment wedge initially prograded downvalley, in response to high bed load sediment yields. Subsequently, palaeovalleys became drowned during the passage of a marine transgression, with the establishment of estuarine conditions. Initial fluvial aggradation and subsequent marine flooding of the palaeovalleys is a consequence of the interaction of high local rates of sediment supply and relative sea-level rise driven by flexural subsidence of the basin.     

Deglaciation models from the Swedish West Coast

Deglaciation processes within different rock relief types are discussed. The lower parts of the fissure-valley landscape in western Sweden were covered by the late-glacial sea at deglaciation, while the rock plateaux between the valleys formed an arctic archipelago. The glacial movements, deposition activity and recession were intimately dependent on the variations of the topography and on the buoyancy of the seawater in the valleys. The opinion that a piedmont glaciation existed in eastern Halland during the deglaciation stage has been corroborated concerning areas above the marine limit. In the valleys below this limit the ice margin, however, was straight or slightly concave. The western part of the South Swedish Highland, situated high above the marine limit, is characterized by a zonal deglaciation; zone by zone of the ice margin was detached from the actively moving ice and became immobile. Subglacially formed eskers appear together with glaciofluvial deltas which formed extramarginally in ice-dammed lakes. The moraine forms are often dominated by 1–2 km long drumlins with rock cores. Where the ice diverged over a convex bedrock basement, Rogen-like moraine ridges, radial as well as transverse, were formed during the deglaciation stage when the ice was stagnating.     

Sedimentology and depositional model for glaciolacustrine deposits in an ice-dammed tributary valley, western Tasmania, Australia

Quaternary sedimentary successions are described from the Linda Valley, a small valley in western Tasmania that was dammed by ice during Early and Middle Pleistocene glaciations. Mapping and logging of exposures suggest that an orderly sequence of deposits formed during ice incursion, occupation and withdrawal from tributary valleys. Four principal sediment assemblages record different stages of ice occupation in the valley. As the glacier advanced, a proglacial, lacustrine sediment assemblage dominated by laminated silts and muds deposited from suspension accumulated in front of the glacier. A subglacial sediment assemblage consisting of deformed lacustrine deposits and lodgement till records the overriding of lake-bottom sediments as the glacier advanced up the valley into the proglacial lake. As the glacier withdrew from the valley, a supraglacial sediment assemblage of diamict, gravel, sand and silt facies formed on melting ice in the upper part of the valley. A lacustrine regression in the supraglacial assemblage is inferred on the basis of a change from deposits mainly resulting from suspension in a subaqueous setting to relatively thin and laterally discontinuous laminated sediments, occurrence of clastic dykes, and increasing complexity of the geometry of deposits that indicate deposition in a subaerial setting. A deltaic sediment assemblage deposited during the final stage of ice withdrawal from the valley consists of steeply dipping diamict and normally graded gravel facies formed on delta foresets by subaqueous sediment gravity flows. The sediment source for the delta, which prograded toward the retreating ice margin, was the supraglacial sediment assemblage previously deposited in the upper part of the valley. A depositional model developed from the study of the Linda Valley may be applicable to other alpine glaciated areas where glaciers flowed through or terminated in medium- to high-relief topography.