Spatial variations in grain size distribution and selected metal contents in the Xiamen Bay,China

The present work attempts to describe the spatial distribution of heavy metals in the surficial sediments of the Xiamen Bay influencing by the characters of the sediments. In this paper, the distribution of trace metals, as well as the main properties (i.e. grain size, TOC, AVS) based on surface sediments collected at 40 stations across the Xiamen Bay was done. The relation of the sediment properties to heavy metal concentrations was evaluated with Pearson’s correlation analysis. According to the grain size distribution, cluster analysis is used to classify the sampling stations into groups regarding the depositional environment. Basing on the data, the hydrodynamic feature and the contamination of surface sediment by selected metals were discussed. The results show that the distribution of various types of sediments and the variations of their concentrations of heavy metals are controlled largely by the hydrodynamic conditions. As for the surface sediments, Xiamen West Harbour shows a serious situation with Arsenic, Pb and Zn.     

Speciation and mobility of heavy metals in mud in coastal reclamation areas in Shenzhen,China

Coastal reclamation has been carried out along the coastal areas near Shenzhen, China in a large scale since 1980s by dumping fill materials over the marine mud at the sea bottom. Usually the area to be reclaimed is drained first and some of the mud is air-dried for a few weeks before it is buried by fill. After reclamation, the terrestrial groundwater, which is relatively acidic and with high dissolved oxygen, gradually displaces the seawater, which is alkaline with high salinity. The changes in the burial conditions of mud and the properties of the pore water in the mud may induce the release of some heavy metals into the mud. Field survey confirms that the pH and salinity of the groundwater in the reclamation site are much lower than the seawater. Chemical analyses of mud and groundwater samples collected from the reclamation sites reclaimed in different years indicate that most of the heavy metals in the mud decrease gradually with time, but the heavy metals in the groundwater are increased. The release of heavy metals into pore water due to reactivation of heavy metals in the mud is of environmental concern. To understand why some of the heavy metals can be released from the mud more easily than others, a sequential extraction method was used to study the operationally determined chemical forms of five heavy metals (Cu, Ni, Pb, Zn, and Cd) in the mud samples. Heavy metals can be presented in five chemical forms: exchangeable, carbonate, Fe–Mn oxide, organic, and residual. Ni and Pb were mainly associated with the Fe–Mn oxide fraction and carbonate fraction; Zn was mainly associated with organic fraction and Fe–Mn oxide fraction, while Cu and Cd were associated with organic fraction and carbonate fraction, respectively. If the residual fraction can be considered as an inert phase of the metal that cannot be mobilized, it is the other four forms of heavy metal that cause the noticeable changes in the concentration of heavy metals in the mud. On the basis of the speciation of heavy metals, the mobility of metals have the following order: Pb (36.63%) > Cu (31.11%) > Zn (20.49%) > Ni (18.37%) > Cd (13.46%). The measured metal mobility fits reasonably well with the degree of concentration reduction of the metals with time of burial observed in the reclamation site.     

Competitive adsorption,release and speciation of heavy metals in the Yellow River sediments,China

The competitive adsorption and the release of selected heavy metals and their speciation distribution before and after adsorption in the Yellow River sediments are discussed. The adsorption of metals onto sediments increases with increasing pH value and decreases with increasing ionic strength. The competitive coefficient K _c and the distribution coefficient K _d are obtained to analyze the competitive abilities of selected heavy metals, which are ranked as Pb > Cu >> Zn > Cd. The competition among selected heavy metals becomes more impetuous with increasing ion concentration in water. Speciation analysis was done by an improved analytical procedure involving five steps of sequential extraction. Cu, Pb and Zn were mainly transformed into the carbonate-bound form (50.8–87.7%) in adsorption. Most of (60.7–77.3%) Cd was transformed into the exchangeable form, and the percentage of carbonate-bound Cd was 19.7–30.4%. The release reaction was so quick that the release capacity of selected heavy metals from sediments to aqueous solution reached half of the maximum value only in 30 s. As opposed to adsorption, the release capacities of selected heavy metals were ranked as Cd > Zn >> Cu > Pb. In this study, Cd produces the most severe environmental hazards, because its concentration in the release solution is 85.8 times more than the human health criteria of US EPA.     

Organic petrology, mineralogy and depositional environment of the Kipra lignite seam, Maritza-West basin, Bulgaria

The aim of the present study is to provide additional information about the properties and depositional environment of the Kipra lignite seam, which was deposited during the regressive stage of development of the Maritza-West basin. Petrographical and mineralogical data, along with ash yields and sulphur contents of 24 samples from a seam profile, have been used to study the vertical variation of the depositional settings during peat accumulation and subsequent coalification.The Kipra lignite is characterized by high ash yields and sulphur contents. It formed in a rheotrophic, low-lying mire with alkaline pH value. Vegetation with low preservation potential dominated within the palaeomire. During peat formation, frequent changes of the water level controlled the depositional environment. During the deposition of units 1 and 2, high water energy caused the transportation of high amounts of inorganic material into the mire, resulting in the formation of weakly gelified mineral-rich lignite. The organic matter from units 3 and 4 is characterized by enhanced gelification, which probably reflects the decreasing energy of the system. Good positive correlation between sulphur contents and the GI values was established in units 4, indicating that the gelification of the tissues was probably mainly controlled by the bacterial activity. In contrast, the gelification of the samples from unit 3 of the Kipra seam was probably governed by the redox conditions. The organic matter deposited under relatively wet conditions, in which the thermal and oxidative destruction of the tissues, was limited.A variety of major, minor and accessory minerals are present in Maritza-West lignite. The mineral composition is dominated mainly by pyrite, gypsum and calcite, and to a lesser extent limonite, quartz, kaolinite, montmorillonite, illite, chlorite and plagioclase. Jarosite, hematite, halloysite, mica, K-feldspar, aragonite, siderite, and dolomite were also determined in very low concentrations. These minerals formed syngenetically and epigenetically. The syngenetic stage is characterized mainly by the formation of pyrite, carbonates, silicates and sulphates, whereas the Fe-oxyhydroxides, partially the carbonates and almost all silicates are of detrital origin. During the epigenetic stage, carbonates, sulphates, clay minerals, pyrite, and Fe-oxyhydroxides were formed. Alteration products like gypsum, jarosite, limonite, chlorite, kaolinite, illite, mica, and calcite were generated due to the transformation of detrital and authigenic minerals.     

Determining the anthropogenic contribution of heavy metal accumulations around a typical industrial town: Xushe,China

Industrial emissions are the major sources of heavy metal pollutions. This study investigates the anthropogenic contribution of heavy metal accumulation surrounding an industrial town in China, using the component partition method. Results show that Cu, Ni, Pb, and As have higher concentrations compared with their background levels and the industrial town has a significant impact on heavy metal accumulations in its surrounding agricultural soil. Prevailing wind direction may explain the difference of heavy metal concentration in different directions. Anthropogenic components of Cu, Ni, Pb and As, which decrease with distance following exponential functions, account for 11.4%, 6.2%, 18.5% and 7.9% of their total concentrations, respectively. The natural components are modeled as the functions of physico-chemical variables through multiple regressions. The accumulating processes of heavy metals affected by industrial activities could be explained by anthropogenic and natural components, and thus, it could provide basic information for further simulation of heavy metal accumulations.     

Historical changes in heavy metals in the Yangtze Estuary, China

A 6-m-long core was used to examine historical changes in heavy metals on tidal flats in the Yangtze Estuary, China. Over the last 100 years, human impact was minimal. However, over the last few decades, vertical metal concentrations have been affected by human activities such as local industrialization, urbanization and construction of major sewage outlets. Copper, lead and arsenic were identified as contaminants in the Yangtze Estuary on the basis of national pollution standards and a comparison of metals in the upper core with those in the lower core.     

Organic geochemical characteristics and depositional environments of the Jurassic coals in the eastern Taurus of Southern Turkey

In this study, organic matter content, type and maturity as well as some petrographic and physical characteristics of the Jurassic coals exposed in the eastern Taurus were investigated and their depositional environments were interpreted.The total organic carbon (TOC) contents of coals in the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc areas are 24.54, 66.78 and 49.15%, respectively. The Feke–Akkaya and Kozan–Kizilinc coals have low Hydrogen Index (HI) values while the Kozan–Gedikli coals show moderate HI values. All coal samples display very low Oxygen Index (OI) values. The Kozan–Gedikli coals contain Type II organic matter (OM), the Feke–Akkaya coals contain a mixture of type II and type III OM; and the Kozan–Kizilinc coals are composed of Type III OM. Sterane distribution was calculated as C₂₇ > C₂₉ > C₂₈ from the m/z 217 mass chromatogram for all coal samples.T_max values for the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc coals are 439, 412 and 427 °C. Vitrinite reflectance values (%R_o) for the Feke–Akkaya and Kozan–Kizilinc coal samples were measured as 0.65 and 0.51 and these values reveal that the Feke–Akkaya and Kozan–Kizilinc coals are at subbituminous A or high volatile C bituminous coal stage. On the basis of biomarker maturity parameters, these coals have a low maturity.The pristane/phytane (Pr/Ph) ratios for the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc coals are 1.53, 1.13 and 1.25, respectively. In addition, all coals show a homohopane distribution which is dominated by low carbon numbers, and C₃₅ homohopane index is very low for all coal samples. All these features may indicate that these coals were deposited in a suboxic environment.The high sterane/hopane ratios with high concentrations of steranes, low Pr/Ph ratios and C₂₅/C₂₆ tricyclic ratios > 1 may indicate that these coals formed in a swamp environment were temporarily influenced by marine conditions.     

Lithological and palynological evidence of late Quaternary depositional environments in the subaqueous Yangtze delta, China

AMS ¹⁴C ages of post-glacial core sediments from the subaqueous Yangtze delta, along with sedimentary structures and distributions of grain size, pollen spores, and dinoflagellate cysts, show an estuarine depositional system from 13 to 8.4 cal ka BP and a deltaic system from 5.9 cal ka BP to the present. The estuarine system consists of intertidal to subtidal flat, estuarine, and estuarine-front facies, characterized by sand–mud couplets and a high sedimentation rate. The deltaic system includes nearshore shelf and prodelta mud featured by lower sedimentation rate, markedly fewer coastal wetland herbaceous pollens, and more dinoflagellate cysts. We explain the extremely high sedimentation rate during 9.2–8.4 cal ka BP at the study site as a result of rapid sea-level rise, high sediment load due to the unstable monsoonal climate, and subaqueous decrease of elevation from inner to outer estuary. A depositional hiatus occurred during 8.2–5.9 cal ka BP, the transition from estuarine to deltaic system, caused possibly by a shortage of sediment supply resulting from delta initiation in paleo-incised Yangtze valley and strong tidal or storm-related reworking in offshore areas. The subsequent development of deltaic system at the study site indicates accelerated progradation of Yangtze delta post-5.9 cal ka BP.     

Sorption behavior of heavy metal pollutants onto shales and correlation with shale geochemistry

The sorption of lead (II) and cadmium (II) on seven shales belonging to the Proterozoic Vindhyan basin, central India, and a black cotton soil, Mumbai, India, was studied and compared with sorbent geochemistry. The sorption equilibrium studies were conducted under completely mixed conditions in batch reactors (pH=5.0 and ionic strength= 0.01 M) at room temperature. The Freundlich model provided better fits to the experimental data compared to Langmuir model. High cadmium and lead sorption was observed for the calcareous shales with greater than 5% CaCO₃. The Freundlich isotherm parameter relating to sorption capacity, i.e., K_F, yielded a strong correlation with the calcium carbonate and calcium oxide content across the various geosorbents studied. The observed sorption pattern may be attributed to complex formation of CaCO₃ with Pb²⁺ and Cd²⁺ leading to surface precipitation. Moreover, the Ca²⁺ present in the sorbents may also involve in ion exchange reaction with lead and cadmium.     

Geochemical fractionation of Ni,Cu and Pb in the deep sea sediments from the Central Indian Ocean Basin: An insight into the mechanism of metal enrichment in sediment

Metal speciation study in combination with major element chemistry of deep sea sediments provided possible metal enrichment pathways in sediments collected from environmentally different locations of Central Indian Ocean Basin (CIB). Metal speciation study suggests that Fe–Mn oxyhydroxide phase was the major binding phase for Ni, Cu and Pb in the sediments. The second highest concentrations of all these metals were present within the structure of the sediments. Easily reducible oxide phase (within the Fe–Mn oxyhydroxide binding phases) was the major host for all the three metals in the studied sediments. Major element chemistry of these sediments revealed that there was an increased tendency of Cu and Ni to get incorporated into the deep sea sediment via the non-terrigenous Mn-oxyhydroxide fraction, whereas, Pb gets incorporated mostly via amorphous Fe-hydroxides into the sediment from the CIB. This is the first attempt to provide an insight into the mechanism of metal enrichment in sediment that host vast manganese nodule.     

Concentration distribution and assessment of several heavy metals in sediments of west-four Pearl River Estuary

Grain size parameters, trace metals (Co, Cu, Ni, Pb, Cr, Zn, Ba, Zr and Sr) and total organic matter (TOM) of 38 surficial sediments and a sediment core of west-four Pearl River Estuary region were analyzed. The spacial distribution and the transportation procession of the chemical element in surficial sediments were studied mainly. Multivariate statistics are used to analyses the interrelationship of metal elements, TOM and the grain size parameters. The results demonstrated that terrigenous sediment taken by the rivers are main sources of the trace metal elements and TOM, and the lithology of parent material is a dominating factor controlling the trace metal composition in the surficial sediment. In addition, the hydrodynamic condition and landform are the dominating factors controlling the large-scale distribution, while the anthropogenic input in the coastal area alters the regional distribution of heavy metal elements Co, Cu, Ni, Pb, Cr and Zn. The enrichment factor (EF) analysis was used for the differentiation of the metal source between anthropogenic and naturally occurring, and for the assessment of the anthropogenic influence, the deeper layer content of heavy metals were calculated as the background values and Zr was chosen as the reference element for Co, Cu, Ni, Pb, Cr and Zn. The result indicate prevalent enrichment of Co, Cu, Ni, Pb and Cr, and the contamination of Pb is most obvious, further more, the peculiar high EF value sites of Zn and Pb probably suggest point source input.     

Spatial variations in heavy metals on tidal flats in the Yangtze Estuary,China

Surface samples are used to determine onshore-offshore variations in heavy metal concentrations on tidal flats on Chongming and Hengsha Islands in the Yangtze Estuary, China. The Mann-Whitney U-Test suggests that proximity to the estuarine turbidity maximum does not result in significantly higher metal concentrations on tidal flats. Principal Components Analysis shows that grain-size is the primary control on metal concentrations, reflecting the occurrence of salt marsh and mud and sand flats. Sediment quality is comparable to that of pristine estuaries because of dilution by high river sediment loads.     

Accumulation and sources of heavy metals in urban topsoils: a case study from the city of Xuzhou, China

The knowledge of the variability, the anthropogenic versus natural origin and corresponding environmental risk for potentially harmful elements in urban topsoils is of importance to assess human impact. The aims of the present study were: (1) to assess the distribution of heavy metals (Sn, Li, Ga, Ba, Fe, Mn, Co, Be, Ti, Al, Hg, Cr, Sb, As, Bi, Pd, Pt, Au, Ni, Cd, Zn, Cu, Pb, Se, Mo, Sc and Ag) in urban environment; (2) to discriminate natural and anthropogenic contributions; and (3) to identify possible sources of pollution. Multivariate statistic approaches (principal component analysis and cluster analysis) were adopted for data treatment, allowing the identification of three main factors controlling the heavy metal variability in Xuzhou urban topsoils. Results demonstrate that Hg, Cr, Sb, As, Bi, Pd, Pt, Au, Ni, Cd, Br, Zn, Cu, S, Pb, Se, Mo, Sc and Ag could be inferred to be tracers of anthropogenic pollution, whereas Al, Ti, Ga, Li, V, Co, Pt, Mn and Be were interpreted to be mainly inherited from parent materials. Iron, Ba, Sn, Pd and Br were interpreted to be affected by mixed sources.     

Correlations between heavy metals and organic carbon extracted by dry oxidation procedure in urban roadside soils

The organic fraction in soils has a significant influence on heavy metal transport. In this study, the organic carbon content was measured by dry oxidation procedure from 21 Xuzhou urban roadside soils to assess the relationships between the concentrations of heavy metals (Pb, Cu, Zn, and Cr) and the amount of organic carbon. The anthropogenic heavy metals (e.g. Pb, Cu, Zn) were strongly correlated with organic carbon (denoted by C_org−c) extracted by dry oxidation while natural heavy metal (e.g. Cr) showed no correlation to the C_org−c. The anthropogenic heavy metals were also strongly correlated with the amount of the total carbon. These results show that the anthropogenic heavy metals are mainly enriched in the organic matter in the Xuzhou urban roadside soils.     

Contamination,chemical speciation and vertical distribution of heavy metals in soils of an old and large industrial zone in Northeast China

Heavy metal pollution of soils has become a major concern in China as a consequence of rapid urbanization and industrialization in recent years. However, the evaluation on soil heavy metal pollution in Shenyang, the largest heavy industrial base city in China, has not yet been conducted. In this study, accumulation, chemical speciation, and vertical distribution Cu, Zn, Pb and Cd in soils were studied and pollution condition was assessed in Tiexi Industrial District of Shenyang, the largest and oldest industrial zone in Northeastern China. The results showed that in topsoil, the average concentration of total Cu, Zn, Pb, and Cd was 209.06, 599.92, 470.19 and 8.59 mg kg⁻¹, respectively, much higher than the national threshold limit. The values of pollution index and integrated pollution index showed that the pollution level was Cd > Cu > Zn > Pb, and Cd, Cu and Zn belong to heavy pollution level. The residual, Fe and Mn oxide-bound, and organic-bound species accounted for about 90%, while carbonate-bound and exchangeable species accounted for about 10%. This study indicates that the soils in the industrial zone were widely and extremely polluted by multi-heavy metals as a result of long-term industrial activities.     

Potential source rocks, organic geochemistry and thermal maturation in the southern depocenter (Kipourio–Grevena) of the Mesohellenic Basin, central Greece

The study area is the southern depocenter (depth > 4200 m) of the Mesohellenic Basin which extends between Kipourio and Grevena, central Greece. The Mesohellenic Basin is a Middle-Tertiary intramontane basin developed within the Hellenide orogen. Previous studies have focused on the depositional environments, configuration and hydrocarbon potential of the basin. In this paper we present additional geochemical and petrographic data from outcrop samples of the basin's southern depocenter, which is considered the most promising area, in terms of hydrocarbon prospectivity. A total number of thirty six samples were analysed: Rock-Eval pyrolysis, maceral analysis, vitrinite reflectance and thermal alteration index, bitumens extraction, liquid chromatography, and GC-MS. The samples were collected from deltaic deposits and submarine fan sediments of Late Eocene to Late Oligocene age. The TOC values of the analysed samples range between rich and very rich and the organic matter consists mainly of type III kerogen and the organic matter consider to be predominately gas prone. The thermal maturity assessed from T_max and vitrinite reflectance shows an immature stage of the organic matter along with the presence of layers having reached the very early mature stage. Vitrinite reflectance measurements and maturity calculations (applying the Lopatin modeling), reveal that the lower part of the depocenter sediments falls within the ‘oil window’. The extractable organic matter (EOM) (mg bitumens/g TOC) indicate the existence of samples (from deltaic deposits) with high ratio of transformation (EOM) (> 100 mg bitumen/g TOC). The GC and GC-MS analyses of the biomarkers indicate mainly the occurrence of terrestrial organic matter reflecting oxidizing conditions and both immature and very early mature stages. The results of the Rock-Eval pyrolysis and the distribution of the isoprenoids support the assumption of the input of an organic matter mixture.     

Assessment of heavy metals contamination in urban topsoil from Changchun City,China

Due to the rapid urbanization and industrialization that has occurred in China over the last few decades, metals have been continuously emitted into the urban environment and now pose a serious threat to human health. Indeed, there is a growing concern over the potential for pollution of urban soils with heavy metals. Therefore, an extensive soil survey was conducted in urban areas of Changchun, China, to evaluate the current status of heavy metal contamination in soils and to evaluate its potential sources. A total of 352 samples of urban soils were collected from urban areas of Changchun using a systematic sampling strategy in which one sample per km² was taken (0 ~ 20 cm). The levels of Cu, Pb, Zn and the major elements (Mn, Al₂O₃, CaO, Fe₂O₃, MgO, SiO₂, K₂O and NaO) were then determined by X-Ray fluorescence spectrometry (XRF), while the level of Cd was determined by graphite furnace atomic absorption spectrometry (GF-AAS), and the Hg and As concentrations were determined by atomic fluorescence spectroscopy (AFS). The results indicated that, when compared with the background values of topsoil in the Changchun region, the topsoil in urban areas were enriched with metals, particularly Cu, Cd, Zn, Pb and Hg. The results of correlation coefficient analysis showed that Hg, As, Cd, Cu, Pb and Zn were significantly positive correlated with each other, while Cr and Mn formed another group. Moreover, significantly positive correlations were observed between pH and Zn, Pb, Cu, Cd, As and Hg, indicating that pH influences the distributions of these metals in urban soils in Changchun. Principal component analysis (PCA) was conducted to identify sources of heavy metals and the results revealed distinctly different associations among the trace metals and the major elements in the urban soils. The concentration of Cr appeared to be controlled by the parent material (natural sources), while Cu, Pb and Zn were mainly from vehicle emissions, with Zn primarily coming from vehicle tires. Additionally, Hg and As primarily originated from coal combustion, while Cd was mainly associated with industrial sources. According to the pollution index (PI) of each metal, the overall levels of metal pollution were not especially high, but there were clearly contaminated sites concentrated in the central and northeast portion of the studied region. The Nemerow integrated pollution index (NIPI) of the seven metals also indicated that urban soils in Changchun city were classified as having low level of pollution.     

Dissolved trace elements and heavy metals in the Danjiangkou Reservoir,China

Concentrations of trace elements and heavy metals (Al, As, Ba, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, Se, Sr, V and Zn) in the Danjiangkou Reservoir, the water source area of the Middle Route of China’s interbasin South to North Water Transfer Project, were analyzed using an Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) and compared with the national and international standards for drinking water. The results indicated that concentrations of As, Pb, Sb and Se in the Reservoir exceeded the standards and they would pose health risk for residents in the region and the water receiving areas of the interbasin water transfer project. Spatial and temporal variability of the trace elements and heavy metals in the Reservoir implies their mixed sources of natural processing and anthropogenic activities in the upper drainage of the Reservoir. The research results would help develop water resource management and conservation strategy for the interbasin water transfer project.     

Extraction and distribution of soil organic and inorganic selenium in coal mine environments of Wyoming, USA

 Selenium (Se), an animal toxicant and aquifer contaminant, occurs in coal mine environments of Wyoming. There is a paucity of information on solution-phase Se speciation in mine soils. The objectives of this study were to compare Se extraction efficiencies of various reagents and to characterize SeO^2– ₃ (selenite), SeO^2– ₄ (selenate) and organic Se components in these extracts. Forty coal mine soils were extracted using DI (deionized) water, hot water (0.1% CaCl₂), AB-DTPA, NaOH, and KH₂PO₄. Each solution was analyzed for total dissolved Se, and inorganic and organic Se fractions. Both inorganic and organic Se fractions were detected in the soil extracts. The order of Se (total, inorganic, and organic) extraction efficiency for different reagents was DI water < hot water < AB-DTPA < NaOH < KH₂PO₄. The inorganic–organic Se ratios in DI water, hot water, AB-DTPA, NaOH, and KH₂PO₄ extracts were 60 : 40, 26 : 74, 61 : 39, 87 : 13, and 52 : 48, respectively, indicating predominance of inorganic Se in all but the hot water extract. Selenite was the dominant inorganic species in AB-DTPA and KH₂PO₄ extracts, while SeO^2– ₄ was the major Se species in the DI water, hot water, and NaOH extracts. Significant correlations (P<0.01) were observed among extractable inorganic Se [NaOH and KH₂PO₄ (r=0.95); hot water and AB-DTPA (r=0.89)], total soluble Se [DI water with hot water (r=0.98) and AB-DTPA (r=0.95)], and Se species [SeO^2– ₃ in AB-DTPA with SeO^2– ₄ in NaOH (r=0.94) and SeO^2– ₃ in KH₂PO₄ (r=0.88)]. These correlations are indicative of Se extraction efficiency, thermodynamically predicted chemical transformations (such as oxidation of SeO^2– ₃ to SeO^2– ₄), and probable interconversions between the organic and inorganic Se fractions (r=0.70 in KH₂PO₄ extracts); as a whole the correlations can be used as statistical validations of possible geochemical processes. Received: 21 August 1995 · Accepted: 16 October 1995     

GIS-based colour composites and overlays to delineate heavy metal contamination zones in the shallow alluvial aquifers, Ankaleshwar industrial estate, south Gujarat, India

In an attempt to delineate heavy metal contamination precincts and to evaluate the extent and degree of toxic levels, besides their possible sources, 38 water samples from Ankaleshwar Industrial Estate, south Gujarat, India were analyzed. By clutching geochemical analyses and GIS-based colour composites areas depicting anomalously high concentration of heavy metals (Mo, Zn, Pb, Ni, Co, Cd, etc.) in the groundwater were revealed. The multicomponent overlays in grey-scale facilitated in identifying situates of heavy metal ‘hot spots’, and lateral protuberances of the contamination plume around defile stretch of the main stream Amla Khadi flowing through the area. The multiple pollution plumes emerging from other parts of the area further coincide with effluent laden streams and small channels indicating industrial establishments as major sources of groundwater contamination. Influent nature of the streams, accelerated infiltration process, high mass influx and shallow groundwater table are the factors conducive for easy access of heavy metals to the phreatic aquifers affecting over 20 km² area. On the basis of P/U ratios (concentration of metals in polluted water to unpolluted water), geogenic and anthropogenic sources have been identified. Very high levels of technogenic elements present in the ground water raise concerns about possible migration into food crops, as the area is an important horticultural locale and is highly cultivated.