Internal Resonances for Heave,Roll and Pitch Modes of A Spar Platform Considering Wave and Vortex-Induced Loads in the Main Roll Resonance

We present a study of the nonlinear coupling internal resonance for the heave roll and pitch performance of a spar platform under the wave and vortex-induced loads when the ratio of the frequencies of heave, roll and pitch are approximately 2:1:1. In consideration of varying wet surface, the three DOFs nonlinear coupled equations are established for the spar platform under the effect of the first-order wave loads in the heave and pitch, and vortexinduced loads in the roll. By utilizing the method of multi-scales when the vortex-induced frequency is close to the natural roll frequency, the first-order perturbation solution is obtained analytically and further validated by the numerical integration. Sensitivity analysis is performed to understand the influence of the damping and the internal detuning parameter. Two cases with internal resonance are shown. The first case is that no saturation phenomenon exists under small vortex-induced loads. The first order perturbation solution illustrates that only the vortex-induced frequency motion in roll and the super-harmonic frequency motion in heave are excited. The second case is that the vortex-induced loads are large enough to excite the pitch and a saturation phenomenon in the heave mode follows.The results show that there is no steady response occurrence for some cases. For these cases chaos occurs and large amplitudes response can be induced by the vortex-induced excitation.     

Internal Resonances for Heave, Roll and Pitch Modes of A Spar Platform Considering Wave and Vortex-Induced Loads in the Main Roll Resonance

We present a study of the nonlinear coupling internal resonance for the heave roll and pitch performance of a spar platform under the wave and vortex-induced loads when the ratio of the frequencies of heave, roll and pitch are approximately 2:1:1. In consideration of varying wet surface, the three DOFs nonlinear coupled equations are established for the spar platform under the effect of the first-order wave loads in the heave and pitch, and vortex-induced loads in the roll. By utilizing the method of multi-scales when the vortex-induced frequency is close to the natural roll frequency, the first-order perturbation solution is obtained analytically and further validated by the numerical integration. Sensitivity analysis is performed to understand the influence of the damping and the internal detuning parameter. Two cases with internal resonance are shown. The first case is that no saturation phenomenon exists under small vortex-induced loads. The first order perturbation solution illustrates that only the vortex-induced frequency motion in roll and the super-harmonic frequency motion in heave are excited. The second case is that the vortex-induced loads are large enough to excite the pitch and a saturation phenomenon in the heave mode follows. The results show that there is no steady response occurrence for some cases. For these cases chaos occurs and large amplitudes response can be induced by the vortex-induced excitation.     

Design of passive anti-roll tanks for roll stabilization in the nonlinear range

The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6.     

An experimental self-motion study of the Ocean Explorer AUV incontrolled sea states

This paper describes a controlled self-motion study recently carried out using a small autonomous underwater vehicle (AUV) in a controlled environment in which regular and random waves can be generated accurately for various frequencies and heights. In this study, the AUV was one of the Florida Atlantic University's Ocean Explorer series vehicles, and the controlled environment was chosen to be the Maneuvering And Sea-Keeping (MASK) facilities located at the David Taylor Model Basin. During the entire study, 29 sets of experimental motion and wave data were collected under various wave frequencies and heights, vehicle alignment, and operating depths. Due to the wave tank constraint, the vehicle speed was restricted to be less than 1.5 m/s and the wave frequency higher than 0.3 Hz without significantly affecting the self-motion analysis. Time history and power spectral density results suggest that the roll-induced pitching response was considerably larger for the wave frequencies tested, as compared to the pitch-induced rolling response. Standard deviation results reveal that the existing OEX is capable of producing approximately 3° (peak-to-peak) pitch, 0.7° (peak-to-peak) roll, and 0.6° (peak-to-peak) yaw at 2-m depth in the head-sea condition when the encountering wave frequency is close to 0.4 Hz. However, at 1.5-m vehicle depth, significant surges were observed in pitching and rolling motion, suggesting that the OEX is currently unsuitable to maintain accurate depth-following within this range at sea-state 2 or higher. It is hoped that the results presented can provide better insights into how a small AUV with a nonideal body shape reacts to waves of different sea states, and how vehicle self-motion can be streamlined by choosing proper vehicle speed, heading, and depth, given that the wave characteristics are available     

A nonlinear model of parametric rolling stabilization by anti-roll tanks

The present paper describes a mathematical model in which the fluid motion inside a U-tank is nonlinearly coupled to the heave, roll and pitch motions of the ship. The main purpose of the investigation is centred on the control of roll motion in the case of parametric resonance in longitudinal waves. A transom stern small vessel, known to be quite prone to parametric amplification, is employed in the study. Four tank designs are employed in order to study the influence of tank mass, tank natural frequency and tank internal damping on the control of parametric rolling at different head seas conditions. Additionally, the influence of the vertical position of the tank is also investigated. The main results are presented in the form of limits of stability, with encounter frequency and wave amplitudes as parameters. Distinct dynamical characteristics are discussed and conclusions are drawn on the relevant parameters for the efficient control of the roll amplifications in head seas.     

Parametric model identification of high-speed craft dynamics

Parametric models of heave, pitch and roll dynamics of a high-speed craft have been estimated for different wave incidence angles in the frequency domain. Several issues that make the identification problem interesting are the following: type of parameterization, starting values, non-quadratic functions, excitation signals and short data record. The method employed guarantees a fine linear approximation of the nonlinear dynamics of a fast ship for the ultimate goal of stabilization control to reduce motion sickness associated with heave, pitch and roll accelerations. In addition, the approach achieves high-quality starting values and avoids non-quadratic terms in the cost function, which results in less computational load and significantly more accurate models when compared with a previous method employed for the same problem.     

基于非线性数学模型的半潜式平台共振运动特性研究

共振运动是深海浮式平台设计的关键考虑因素之一,对海洋平台的作业具有重要影响。采用半潜式平台运动的非线性耦合数学模型,考虑浮筒和横撑出入水以及垂荡、横摇和纵摇运动耦合对平台浮力和恢复力的影响,研究半潜式平台非线性共振运动特性,以及不规则波浪参数对运动的影响。研究表明:在非线性耦合运动和浮力变化的影响下,半潜式平台纵摇和垂荡运动的固有周期会随运动幅值的增大而逐渐减小,且最终趋于稳定,对纵摇运动周期的影响更为显著;非线性效应会使半潜式平台产生显著的低频纵摇共振响应,以及共振频率漂移的现象,且受随机种子和波浪周期的影响较小。     

Motions of a spherical submarine in waves

The free motions in waves of submerged vehicles with a spherical hull from but different metacentric heights are sought. The problem is analysed by considering the submerged vehicle as a neutrally buoyant sphere. The solutions to two independent problems, namely the radiation problem and the diffraction problem, are required. Nondimensional parameters known as the added mass, damping and diffraction coefficients for neutrally buoyant spheres are derived and computed values of these coefficients are presented in tabulated form. The responses of surge, heave and pitch are explicitly expressed by these coefficients and the metacentric height of the submarine. A spherical submarine is practically motionless relative to the particle movement of waves except at the vicinity of reasonant frequency, which is governed by the value of metacentric height.     

The effect of nonlinear damping and restoring in ship rolling

Many researchers have studied a wide range of nonlinear equations of motion describing a ship rolling in waves. In this study, a form of nonlinear equation governing the motion of a rolling ship subjected to synchronous beam waves is suggested and solved by the generalized Duffing's method in the frequency domain. Various representations of damping and restoring terms found in the literature are investigated and their solutions are analyzed by the above-mentioned method. Comparative results of nonlinear roll responses are obtained for four distinct vessel types at resonance conditions which constitute the worst situation. The results indicate the importance of roll damping and restoring, when constructing a nonlinear roll model. An inappropriate selection of damping and restoring terms may lead to serious discrepancies with reality, especially in peak roll amplitudes.     

Empirical calculation of roll damping for ships and barges

For a large floating structure in waves, the damping is computed by the linear diffraction/radiation theory. For most degrees of freedom, this radiation damping is adequate for an accurate prediction of the rigid body motions of the structure at the wave frequencies. This is not particularly true for the roll motion of a long floating structure. For ships, barges and similar long offshore structures, the roll damping is highly nonlinear. In these cases the radiation damping is generally quite small compared to the total damping in the system. Moreover, the dynamic amplification in roll may be large for such structures since the roll natural period generally falls within the frequency range of a typical wave energy spectrum experienced by them. Therefore, it is of utmost importance that a good estimate of the roll damping is made for such structures. The actual prediction of roll damping is a difficult analytical task. The nonlinear components of roll damping are determined from model and full scale experiments. This paper examines the roll damping components and their empirical contributions. These empirical expressions should help the designer of such floating structures. The numerical values of roll damping components of typical ships and barges in waves and current (or forward speed) are presented.     

Robust control for an autonomous underwater vehicle that suppresses pitch and yaw coupling

Attitude control systems for autonomous underwater vehicles are often implemented with separate controllers for pitch motion in the vertical plane and yaw motion in the horizontal plane. We propose a novel time-varying model for a streamlined autonomous underwater vehicle that explicitly displays the coupling between yaw and pitch motion due to nonzero roll angle and/or roll rate. The model facilitates the use of a multi-input multi-output H_∞ control design that is robust to yaw-pitch coupling. The efficacy of our approach is demonstrated with field trials.     

Integrated System for Robust 6-DOF Positioning Utilizing New Closed-Form Visual Motion Estimation Methods in Planar Terrains

Estimating the relative positions and (or) trajectory of a camera from video images is a fundamental problem in motion vision. Of special relevance is the closed-form solution for planar scenes, for processing fly-over imagery from airborne and underwater robotics platforms, automated airplane landing utilizing runway landmarks, photomosaicing, etc. However, the method's robustness can break down in certain scenarios, e.g., due to inherent translation-rotation ambiguity of visual motion with short baselines and narrow field of view. The robustness can be improved by devising methods that compute a smaller set of motion parameters, utilizing other sensors to measure the remaining components. This paper addressed key issues in six degrees of freedom positioning from fly-over imagery by integrating vision with rotational angle sensors. First, we propose and utilize robust closed-form solutions for estimating the motion and orientation of a planar surface from the image flow variations up to first order, given measurements of pitch and roll motions. We also describe a calibration technique to enable the integration of angle sensor and visual measurements. Next, an error analysis enables us to evaluate the impact of inaccurate pitch and roll measurements on the estimates from the new closed-form solutions. Finally, the performance of our new methods and the integrated positioning system are evaluated in various experiments with synthetic and real data     

Application of the extended Melnikov's method for single-degree-of-freedom vessel roll motion

Traditionally, when using Melnikov's method to analyze ship motions, the damping terms are treated as small. This is typically true for roll motion but not always true for other and/or multiple degrees of freedom. In order to apply Melnikov's method to other and/or multiple-degree-of-freedom motions, the small damping assumption must be addressed. In this paper, the extended Melnikov method is used to analyze ship motion without the constraint of small linear damping. Two roll motion models are analyzed here. One is a simple roll model with nonlinear damping and cubic restoring moment. The other is the model with biased restoring moment. Numerical simulations are investigated for both models. The effectiveness and accuracy of this method is demonstrated.     

Hydroelastic analysis of pontoon-type circular VLFS with an attached submerged plate

This paper is concerned with the hydroelastic analysis of a pontoon-type, circular, very large floating structure (VLFS) with a horizontal submerged annular plate attached around its perimeter. The coupled fluid–structure interaction problem may be solved by using the modal expansion method in the frequency domain. It involves, firstly, the decomposition of the deflection of a circular Mindlin plate with free edges into vibration modes that are obtained analytically. Then the hydrodynamic diffraction and radiation forces are evaluated by using the eigenfunction expansion matching method which can also be done in an exact manner. The hydroelastic equation of motion is solved by the Rayleigh–Ritz method for the modal amplitudes, and then the modal responses are summed up to obtain the total response. The effectiveness of the attached submerged annular plate in reducing the motion of VLFS has been confirmed by the analysis.     

Oscillating Body Design for A 3-DOF Wave Energy Converter

Ocean wave energy converters (WECs) are obtaining more and more attentions in the world. So far, many types of converters have been invented. Oscillating body systems are a major class of WECs, which typically have one degree of freedom (DOF), and the power absorption efficiency is not quite satisfactory. In this paper, a 3-DOF WEC is proposed and a simplified frequency-domain dynamic model of the WEC depending on the linear potential theory is conducted. The performances of three geometries of the oscillating body including the cone, the cylinder and the hemisphere have been compared, and the results show that the hemisphere is more suitable for the 3-DOF WEC. Subsequently, the relationship among the parameters of the hemisphere is established based on the equal natural frequencies of the heave and pitch (or roll) motions, and the results show that lowering the center of gravity leads to the better power absorption in the pitch (or roll) motion. In the end, the power matrixes of different sizes of the hemispheres under different irregular waves are obtained, which can give a size design reference for engineers.     

Nonlinear adaptive control of an underwater towed vehicle

This paper addresses the problem of simultaneous depth tracking and attitude control of an underwater towed vehicle. The system proposed uses a two-stage towing arrangement that includes a long primary cable, a gravitic depressor, and a secondary cable. The towfish motion induced by wave driven disturbances in both the vertical and horizontal planes is described using an empirical model of the depressor motion and a spring-damper model of the secondary cable. A nonlinear, Lyapunov-based, adaptive output feedback control law is designed and shown to regulate pitch, yaw, and depth tracking errors to zero. The controller is designed to operate in the presence of plant parameter uncertainty. When subjected to bounded external disturbances, the tracking errors converge to a neighbourhood of the origin that can be made arbitrarily small. In the implementation proposed, a nonlinear observer is used to estimate the linear velocities used by the controller thus dispensing with the need for costly sensor suites. The results obtained with computer simulations show that the controlled system exhibits good performance about different operating conditions when subjected to sea-wave driven disturbances and in the presence of sensor noise. The system holds promise for application in oceanographic missions that require depth tracking or bottom-following combined with precise vehicle attitude control.     

Analysis of roll motion and stability of a fishing vessel in head seas

The present paper describes an investigation on the relevance of parametric resonance for a typical fishing vessel in head seas. Results for different Froude numbers are discussed based on experimental, numerical and analytical studies.The first region of resonance is investigated. Distinct wave amplitudes are considered. Some intense resonances are found to occur. The paper compares the experimental results with non-linear time simulations of the roll motion. Very good agreement is found, even when large motions take place.Finally, in order to analyze the experimental/numerical results, analytic consideration is given to distinct parameters affecting the dynamic process of roll amplification. The influence of heave, pitch, wave passage effect, speed and roll restoring characteristics are discussed.     

Investigation of motions of catamarans in regular waves—II

By extending the linear frequency domain theory, a quasi-non-linear time-domain technique has been developed to investigate the large amplitude motions of catamarans in regular waves. The non-linearity of hydrodynamic forces included in this practical method comes from variations of a ship's submerged portion. These forces are obtained from a database generated by the linear frequency domain method at each time step. The coupled equations, heave and pitch, are solved in the time domain by using the Runge-Kutta method with proper initial values. In order to investigate the non-linear effects of large amplitude motions of the V-1 catamaran in the head-sea condition, numerical results obtained from the linear and non-linear strip methods have been compared with those obtained from a series of experiments carried out in the towing tank of the Hydrodynamics Laboratory at the University of Glasgow. Based on the comparative studies, the numerical results obtained from the time-domain program can provide better predictions for the large amplitude motions of catamarans than the linear frequency domain method. It is concluded that the non-linear effects are significant when the model speeds and wave amplitudes increase. The peak values of large amplitude motions around the resonance frequencies, as obtained from the non-linear time-domain predictions as well as from measurements, are smaller than those obtained from the linear theory.     

Comparison of wave load effects on a TLP wind turbine by using computational fluid dynamics and potential flow theory approaches

Tension Leg Platform (TLP) is one of the concepts which shows promising results during initial studies to carry floating wind turbines. One of the concerns regarding tension leg platform wind turbines (TLPWTs) is the high natural frequencies of the structure that may be excited by nonlinear waves loads. Since Computational Fluid Dynamics (CFD) models are capable of capturing nonlinear wave loads, they can lead to better insight about this concern. In the current study, a CFD model based on immersed boundary method, in combination with a two-body structural model of TLPWT is developed to study wave induced responses of TLPWT in deep water. The results are compared with the results of a potential flow theory-finite element software, SIMO-RIFLEX (SR). First, the CFD based model is described and the potential flow theory based model is briefly introduced. Then, a grid sensitivity study is performed and free decay tests are simulated to determine the natural frequencies of different motion modes of the TLPWT. The responses of the TLPWT to regular waves are studied, and the effects of wave height are investigated. For the studied wave heights which vary from small to medium amplitude (wave height over wavelength less than 0.071), the results predicted by the CFD based model are generally in good agreement with the potential flow theory based model. The only considerable difference is the TLPWT mean surge motion which is predicted higher by the CFD model, possibly because of considering the nonlinear effects of the waves loads and applying these loads at the TLPWT instantaneous position in the CFD model. This difference does not considerably affect the important TLPWT design driving parameters such as tendons forces and tower base moment, since it only affects the mean dynamic position of TLPWT. In the current study, the incoming wave frequency is set such that third-harmonic wave frequency coincides with the first tower bending mode frequency. However, for the studied wave conditions a significant excitation of tower natural frequency is not observed. The high stiffness of tendons which results in linear pitch motion of TLPWT hull (less than 0.02 degrees) and tower (less than 0.25 degrees) can explain the limited excitement of the tower first bending mode. The good agreement between CFD and potential flow theory based results for small and medium amplitude waves gives confidence to the proposed CFD based model to be further used for hydrodynamic analysis of floating wind turbines in extreme ocean conditions.